Professional Documents
Culture Documents
R916 R926 Us NTB 2011 01 - 10547 0 PDF
R916 R926 Us NTB 2011 01 - 10547 0 PDF
Economical technology
Costs savings thanks Fuel savings are achieved thanks to the integrated
to fuel efficiency excavator system technology and the efficient en-
gine and hydraulics management. When not per-
forming a task, the sensor-controlled function auto-
matically idles the engine, reducing fuel consumption
and emissions.
Value
High quality Liebherr excavators are engineered and built to last,
with high quality materials and superior workman-
ship - guaranteeing a long service life.
Environmental All Liebherr engines meet the exhaust gas direc-
protection and tives specified by law, of Stage IIIA/ Tier 3, which
recycling means reduced nitrogen oxide and fine dust emis-
sions. With Liebherr, concern for the environment is
extended to the whole machine. Up to 95 % of all
the components from a Liebherr excavator can be
recycled, and only lead-free paints are used.
R 916
D A
W C
H
K P
Q
L N
U S
Z B
V G
X
ft m
Digging Envelope
10
with Quick Change Adapter 1 2 3 4
30 9
Stick lengths ft in 7’ 3” 7’10” 8’10” 9’10”
8
25 Max. digging depth ft in 19’10” 20’ 6” 21’ 6” 22’ 6”
7 Max. reach at ground level ft in 30’ 6” 31’ 2” 32’ 33’
Max. dump height ft in 20’ 6” 20’10” 21’ 2” 21’ 8”
20 6 Max. teeth height ft in 30’ 4” 30’ 8” 31’ 2” 31’ 8”
5
15
4
Digging Forces
without Quick Change Adapter 1 2 3 4
10 3
Digging force ISO lbf 31,248 29,675 27,202 25,403
2 lb 31,305 29,762 27,116 25,353
5 Breakout force ISO lbf 40,241 40,241 40,241 40,241
1 lb 40,123 40,123 40,123 40,123
with Quick Change Adapter
0 0
Digging force ISO lbf 29,900 28,326 26,078 24,279
-1
lb 29,982 28,219 26,014 24,250
-5
-2 Breakout force ISO lbf 34,845 34,845 34,845 34,845
lb 34,832 34,832 34,832 34,832
-10 -3
-15
-4
Operating Weight
-5 and Ground Pressure
-20 -6 1 Operating weight includes basic machine with heavy duty counterweight,
2
34 gooseneck boom 18’8”, stick 7’10”, quick change adapter 48 and bucket
-7 1.24 yd3.
-25
-8 Undercarriage LC
11 10 9 8 7 6 5 4 3 2 1 0m
Pad width in 20” 24” 30”
35 30 25 20 15 10 5 0 ft Weight lb 54,675 55,336 56,328
Ground pressure psi 8.8 7.5 6.1
Weight
width
* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm
1) Bucket without quick change adapter
2) Bucket with quick change adapter
R 916
Stick 7’3” Stick 7’10”
10 ft 15 ft 20 ft 25 ft 30 ft 10 ft 15 ft 20 ft 25 ft 30 ft
Under- Under-
ft carriage ft in ft carriage ft in
30 LC 30 LC
25 LC 8,6* 8,6* 18’ 25 LC 7,9* 7,9* 18’10”
20 LC 12,4* 12,4* 8,1* 8,1* 22’ 2” 20 LC 11,9* 11,9* 7,4* 7,4* 22’11”
15 LC 15,8* 15,8* 12,9 13,3* 8,2* 8,2* 24’10” 15 LC 12,9* 12,9* 8,9* 8,9* 7,5* 7,5* 25’ 5”
10 LC 18,6 19,5* 12,2 14,9* 8,7 12,7* 8,2 8,7* 26’ 10 LC 29,2* 29,2* 18,8 18,9* 12,2 14,6* 8,7 12,4* 7,8* 7,8* 26’ 8”
5 LC 17,3 22,6* 11,6 16,5* 8,4 12,9 7,8 9,6* 26’ 4” 5 LC 17,4 22,2* 11,6 16,2* 8,4 12,9 7,5 8,7* 27’
0 LC 18,4* 18,4* 16,6 23,8* 11,1 17,3* 8,2 12,7 7,9 11,3* 25’ 8” 0 LC 18,9* 18,9* 16,6 23,7* 11,1 17,2* 8,1 12,7 7,6 10,1* 26’ 3”
– 5 LC 30,2* 30,2* 16,5 23,0* 11,0 17,0* 8,7 13,5 23’11” – 5 LC 29,0* 29,0* 16,4 23,1* 10,9 17,0* 8,3 12,9* 24’ 7”
– 10 LC 27,6* 27,6* 16,7 20,2* 11,1 14,8* 10,6 14,0* 20’ 9” – 10 LC 28,6* 28,6* 16,6 20,6* 11,0 15,2* 10,0 13,6* 21’ 7”
– 15 LC 19,1* 19,1* 14,0* 14,0* 13,4* 13,4* 15’ 6” – 15 LC 20,6* 20,6* 15,1* 15,1* 13,4* 13,4* 16’ 7”
20 LC 11,2* 11,2* 6,5* 6,5* 24’ 20 LC 6,0* 6,0* 5,8* 5,8* 25’ 1”
15 LC 12,3* 12,3* 9,0 10,5* 6,5* 6,5* 26’ 4” 15 LC 11,7* 11,7* 9,1 10,8* 5,7* 5,7* 27’ 4”
10 LC 28,7* 28,7* 18,0* 18,0* 12,3 14,0* 8,7 12,0* 6,8* 6,8* 27’ 7” 10 LC 26,3* 26,3* 17,1* 17,1* 12,4 13,5* 8,7 11,6* 6,0* 6,0* 28’ 7”
5 LC 15,7* 15,7* 17,5 21,6* 11,6 15,8* 8,4 12,9* 7,1 7,5* 27’11” 5 LC 19,5* 19,5* 17,6 20,9* 11,6 15,3* 8,4 12,6* 6,5* 6,5* 28’10”
0 LC 19,4* 19,4* 16,6 23,4* 11,1 16,9* 8,1 12,6 7,2 8,6* 27’ 3” 0 LC 19,9* 19,9* 16,6 23,1* 11,1 16,7* 8,1 12,6 6,8 7,4* 28’ 3”
– 5 LC 27,5* 27,5* 16,3 23,3* 10,8 17,0* 8,0 12,5 7,7 10,7* 25’ 7” – 5 LC 26,4* 26,4* 16,2 23,3* 10,8 17,0* 7,9 12,4 7,2 9,1* 26’ 7”
– 10 LC 30,1* 30,1* 16,4 21,2* 10,9 15,6* 9,2 13,1* 22’ 9” – 10 LC 31,3* 31,3* 16,3 21,7* 10,7 16,0* 8,5 12,5* 23’11”
– 15 LC 22,7* 22,7* 16,5* 16,5* 13,0 13,1* 18’ 1” – 15 LC 24,7* 24,7* 16,7 17,6* 11,5 12,8* 19’ 6”
Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lb x 1,000, and can be lifted 360° on firm, level supporting
surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30” wide triple-grouser pads. Indicated loads are
based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are limited through the allowed lift capacity of the load
hook on the quick change adapter (26,455 lb). Without quick change adapter the lift capacities will increase by 551 lb, without bucket cylinder, link and lever they
increase by an additional 816 lb.
ft m
12 Digging Envelope
with Quick Change Adapter 1 2 3 4
11
35
Stick lengths ft in 7’ 3” 7’10” 8’10” 9’10”
10
Max. digging depth ft in 18’ 3” 18’10” 19’10” 20’10”
30 9 Max. reach at ground level ft in 31’10” 32’ 6” 33’ 6” 34’ 3”
Max. dump height ft in 24’ 1” 24’ 5” 25’ 3” 25’11”
8 Max. teeth height ft in 34’ 7” 35’ 1” 35’ 9” 36’ 5”
25
7
20 6 Digging Forces
without Quick Change Adapter 1 2 3 4
5
15
Digging force ISO lbf 31,248 29,675 27,202 25,403
4 lb 31,305 29,762 27,116 25,353
10 Breakout force ISO lbf 40,241 40,241 40,241 40,241
3
lb 40,123 40,123 40,123 40,123
2 with Quick Change Adapter
5
1 Digging force ISO lbf 29,900 28,326 26,078 24,279
lb 29,982 28,219 26,014 24,250
0 0 Breakout force ISO lbf 34,845 34,845 34,845 34,845
lb 34,832 34,832 34,832 34,832
-1
-5
-2
Operating Weight
-10 -3
and Ground Pressure
-4
-15 Operating weight includes basic machine with heavy duty counterweight,
-5 straight gooseneck boom 19’8”, stick 7’10”, quick change adapter 48 and
1 bucket 1.24 yd3.
-6 2
-20 3 Undercarriage LC
4
-7
11 10 9 8 7 6 5 4 3 2 1 0m Pad width in 20” 24” 30”
Weight lb 54,785 55,446 56,438
35 30 25 20 15 10 5 0 ft Ground pressure psi 8.8 7.5 6.3
Weight
width
* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm
1) Bucket without quick change adapter
2) Bucket with quick change adapter
R 916
Stick 7’3” Stick 7’10”
10 ft 15 ft 20 ft 25 ft 30 ft 10 ft 15 ft 20 ft 25 ft 30 ft
Under- Under-
ft carriage ft in ft carriage ft in
30 LC 30 LC
25 LC 8,7* 8,7* 19’11” 25 LC 10,2* 10,2* 7,9* 7,9* 20’10”
20 LC 16,0* 16,0* 13,1 13,9* 8,2* 8,2* 23’10” 20 LC 13,1 13,5* 7,5* 7,5* 24’ 7”
15 LC 27,0* 27,0* 18,5* 18,5* 12,6 14,8* 8,8 12,7* 8,1* 8,1* 26’ 3” 15 LC 25,7* 25,7* 17,9* 17,9* 12,6 14,4* 8,8 12,5* 7,4* 7,4* 26’10”
10 LC 18,0 21,6* 11,9 16,1* 8,5 13,0 7,3 8,5* 27’ 5” 10 LC 18,1 21,1* 11,9 15,8* 8,5 13,0* 7,1 7,7* 28’ 1”
5 LC 16,7 23,5* 11,2 17,0* 8,2 12,7 7,0 9,2* 27’ 9” 5 LC 16,7 23,3* 11,2 16,9* 8,2 12,7 6,8 8,3* 28’ 5”
0 LC 16,2 23,1* 10,8 17,1* 8,0 12,5 7,2 10,5* 27’ 1” 0 LC 12,5* 12,5* 16,1 23,2* 10,8 17,1* 7,9 12,4 6,9 9,4* 27’ 9”
– 5 LC 24,4* 24,4* 16,2 20,8* 10,7 15,9* 8,0 11,8* 7,8 11,5* 25’ 5” – 5 LC 23,5* 23,5* 16,1 21,2* 10,6 16,0* 7,9 12,1* 7,5 11,2* 26’ 2”
– 10 LC 20,1* 20,1* 16,4 16,8* 10,9 12,8* 9,3 10,5* 22’ 7” – 10 LC 21,5* 21,5* 16,3 17,4* 10,8 13,3* 8,8 10,4* 23’ 4”
– 15 LC – 15 LC
25 LC 11,1* 11,1* 7,0* 7,0* 22’ 1” 25 LC 11,1* 11,1* 6,2* 6,2* 23’ 4”
20 LC 12,9* 12,9* 8,6* 8,6* 6,5* 6,5* 25’ 8” 20 LC 12,3* 12,3* 9,1 9,7* 5,8* 5,8* 26’ 9”
15 LC 17,1* 17,1* 12,7 13,9* 8,8 12,1* 6,5* 6,5* 27’11” 15 LC 16,3* 16,3* 12,8 13,4* 8,9 11,7* 5,7* 5,7* 28’11”
10 LC 18,3 20,4* 11,9 15,4* 8,5 12,7* 6,7 6,7* 29’ 1” 10 LC 31,5* 31,5* 18,5 19,7* 12,0 14,9* 8,5 12,4* 6,0* 6,0* 5,9* 5,9* 30’
5 LC 16,9 22,9* 11,2 16,6* 8,1 12,7 6,4 7,2* 29’ 4” 5 LC 17,0 22,5* 11,3 16,3* 8,1 12,6 6,1 7,5* 6,1 6,3* 30’ 3”
0 LC 13,7* 13,7* 16,1 23,3* 10,7 17,0* 7,9 12,4 6,5 8,1* 28’ 9” 0 LC 14,4* 14,4* 16,1 23,3* 10,7 16,9* 7,8 12,3 6,1 7,0* 29’ 8”
– 5 LC 22,3* 22,3* 15,9 21,7* 10,5 16,2* 7,8 12,3 7,0 9,6* 27’ 2” – 5 LC 21,4* 21,4* 15,8 22,1* 10,5 16,4* 7,7 12,2 6,5 8,2* 28’ 2”
– 10 LC 23,5* 23,5* 16,1 18,3* 10,6 13,9* 8,1 10,1* 24’ 6” – 10 LC 25,4* 25,4* 15,9 19,1* 10,5 14,4* 7,8 10,4* 7,5 9,8* 25’ 7”
– 15 LC 12,5* 12,5* 8,6* 8,6* 8,4* 8,4* 20’ 3” – 15 LC 13,8* 13,8* 10,0* 10,0* 8,5* 8,5* 21’ 7”
Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lb x 1,000, and can be lifted 360° on firm, level supporting
surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30” wide triple-grouser pads. Indicated loads are
based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are limited through the allowed lift capacity of the load
hook on the quick change adapter (26,455 lb). Without quick change adapter the lift capacities will increase by 551 lb, without bucket cylinder, link and lever they
increase by an additional 816 lb.
•
= Standard
R 916
Undercarriage Operator’s Cab
Wide step + Fire extinguisher +
Reinforced base panel + Foot support +
Reinforced cover and base panel + Electric cooler +
Straight track guide + Cab with bullet-proof glass (front and roof windows) and roof window
D6C conversion kit with 3-piece track guide + wipers +
Tractive force increase + LIDAT Standard (Liebherr data transfer system) +
LIDAT Plus (extended Liebherr data transfer system) +
Air pressure operator seat •
Premium operator seat +
Engine shut-down (via push-button) in cab +
Uppercarriage Bullet-proof roof glass panel with wiper +
Electric refuel pump + Radio with SD-/MMC-card, Aux-in +
Reversible fan drive + Rear view monitoring with camera +
Customized colors + Beacon +
Extended tool kit + Wiper for sunroof +
Xenon headlights +
Protective grid up FOPS +
Protective grid front FGPS +
Sun visor +
Hydraulics Roof sun screen +
Add-on kit rotary drive (including routing) + Auxiliary heating with timer +
Bio-degradable hydr. oil + Change over controls for clamshell bucket/grapple +
Grapple operation (including routing) + Electronic theft protection +
Liebherr proportional control system + Additional halogen headlights behind cab +
Liebherr Tool Control + Additional halogen headlights front cab +
Bypass filter +
Return filter for hammer +
Attachment
Adjustable boom +
Engine Adjustable offset boom +
Fuel pre-heating + Hoist cylinder depth limitation +
Liebherr particle filter + Security for hoist cylinders +
Air pre-filter with dust trap + Piston rod cover bucket cylinder +
Automatic engine shut-down (adjustable time-period) + 26,455 lb lifting hook on bucket +
LIKUFIX +
Liebherr line of buckets +
Straight gooseneck boom +
Safety check valves hoist cylinder +
Safety check valves stick cylinder +
Hose-protecting lubrication system (stick rear) +
Hydr. or mechanical quick change coupler +
Overload warning device +
Central lubrication of the connecting link for bucket kinematics +
Working headlight on boom (left) +
•
= Standard, + = Option
Type ��������������������������������� 4 cylinder in-line Swing ring �������������������������� Liebherr, sealed single race ball bearing swing ring,
Bore/Stroke ������������������� 4.80/5.35 in internal teeth
Displacement ����������������� 388 in3 Swing speed ����������������������� 0 – 11 rpm stepless
Engine operation ������������������� 4-stroke diesel Swing torque ����������������������� 58,297 lbf ft
unit pump system Holding brake ���������������������� wet multi-disc (spring applied, pressure released)
turbo-charged
after-cooled and fuel cooled
reduced emissions
Cooling ����������������������������� water-cooled and integrated motor oil cooler
Air cleaner �������������������������� dry-type air cleaner with pre-cleaner, primary and Operator’s Cab
safety elements
Fuel tank ���������������������������� 100 gal Cab ���������������������������������� ROPS safety cab structure with individual wind
Electrical system shields or featuring a slide-in subpart under the roof,
Voltage ������������������������ 24 V work headlights integrated in the roof, a door with a
Batteries ���������������������� 2 x 135 Ah/12 V side window (can be opened on both sides), large
Starter ������������������������� 24 V/6.6 kW storage compartments, shock-absorbing suspension,
Alternator ��������������������� three phase current 28 V/80 A sounddampening insulating, tinted laminated safety
Engine idling ������������������ sensor-controlled glass, separate window shades for the sunroof and
Integrated motor management windshield
Advanced ��������������������� connection to the integrated system via CAN-BUS is Operator’s seat
�������������������� Liebherr-Air-Comfort seat, airsprung with automatic
available weight adjustment, vertical and horizontal seat
dampening including consoles and joysticks. Seat
and armrests adjustable separately and in combina
tion, seat heating as standard
Control system ��������������������� arm consoles, swinging with the seat
Hydraulic System Operation and displays ����������� large high resolution color display with selfexplana
tory operation via touch screen or turnpush button,
Hydraulic system ������������������ Positive Control Advanced. Dual circuit hydraulic video capability, versatile adjusting, control and
system for independent and need-based quantity monitoring facilities, e.g. climate control, implement
allotment via the hydraulic pumps; sensor-guided. and tool parameters
Features high system dynamics and sensitivity pro Air-conditioning �������������������� standard automatic air-conditioning, ambient air func-
vided by integrated system controlling tion, fast de-icing and demisting at the press of a
Hydraulic pump �������������������� Liebherr variable displacement pump built in trans- button, air vents can be operated via a menu; ambient
versal plate style, in parallel arrangement with inte- air and fresh air filters can be easily replaced and are
grated transfer box accessible from the outside; heating-cooling unit,
Max. flow ���������������������� 2 x 63 gpm designed for extreme outside temperatures, sensors
Max. pressure ���������������� 5,511 psi for solar radiation, inside and outside temperatures
Pump management ��������������� electronic pump management via the integrated Noise emission
system controlling (CAN-BUS) synchronous to the ISO 6396 ���������������������������� LpA (inside cab) = 72 dB(A)
control block 2000/14/EC ������������������������� LWA (surround noise) = 103 dB(A)
Hydraulic tank
���������������������� 77 gal
Hydraulic system
������������������ max. 132 gal
Hydraulic oil filter ������������������ 1 full flow filter (20 μm) in return line with integrated
fine filter area (5 μm)
Hydraulic oil cooler ���������������� compact cooler, consisting of a water cooler, sand- Undercarriage
wiched with hydraulic oil cooler, fuel cooler and after-
cooler cores and hydrostatically driven fan LC ����������������������������������� standard gauge (7’10”)
MODE selection �������������������� adjustment of engine and hydraulic performance via Drive �������������������������������� Liebherr swash plate motors with integrated brake
a mode pre-selector to match application, e.g. for valves on both sides
economical and environmentally friendly operation or Transmission ����������������������� Liebherr planetary reduction gears
for maximum digging performance and heavy-duty Travel speed ����������������������� low range – 2.3 mph
jobs high range – 3.8 mph
RPM adjustment ������������������� stepless adjustment of engine output via rpm at each Net drawbar pull on crawler ������ 50,807 lbf
selected mode Track components ����������������� B 60, maintenance-free
Liebherr Tool Control �������������� 10 preadjustable pump flows and pressures for add- Track rollers/Carrier rollers �������� 9/2
on tools Tracks ������������������������������� sealed and greased
Track pads ������������������������� triple-grouser
Digging locks ����������������������� wet multi-discs (spring applied, pressure released)
Brake valves ������������������������ integrated into travel motor
Lashing eyes ����������������������� integrated
Hydraulic Controls
The controlling is conducted via the integrated system technology, input and output
modules, communicated via the CAN-BUS with the electronic central unit.
Power distribution ����������������� via control valve with integrated safety valves Attachment
Servo circuit
Attachment and swing ������� proportional via joystick levers Type ��������������������������������� combination of resilient steel plates and cast steels
Travel �������������������������� – with proportionally functioning foot pedals or components
adjusted with removable levers Hydraulic cylinders ���������������� Liebherr cylinders with special seal-system, shock
– speed pre-selection absorbing
Additional functions ��������������� proportional regulation via slide switches or foot Pivots ������������������������������� sealed, low maintenance
pedals Lubrication
������������������������� automatic central lubrication system (except link and
tilt geometry)
Hydraulic connections ������������ pipes and hoses equipped with SAE split-flange
connections
Bucket ������������������������������ fitted as standard with Liebherr tooth system
R 926
W C
H
K P
Q
L N
U S
Z B
V G
X
30 9
Max. digging depth ft in 20’ 6” 21’ 2” 22’ 2” 23’ 2”
8 Max. reach at ground level ft in 31’ 2” 31’10” 32’10” 33’ 8”
25
Max. dump height ft in 20’10” 21’ 4” 21’ 8” 22’ 2”
7
Max. teeth height ft in 30’10” 31’ 2” 31’ 8” 32’ 2”
20 6
15
5 Digging Forces
without Quick Change Adapter 1 2 3 4
4
-10 -3
-4
Operating Weight
-15 and Ground Pressure
-5
Operating weight includes basic machine with heavy duty counterweight,
-20 -6 gooseneck boom 19’4”, stick 8’10”, quick change adapter 48 and bucket
1
2 1.24 yd3.
3
-7 4
-25 Undercarriage LC
-8
11 10 9 8 7 6 5 4 3 2 1 0m Pad width in 20” 24” 30”
Weight lb 58,643 59,194 60,848
35 30 25 20 15 10 5 0 ft Ground pressure psi 9.1 7.7 6.4
Weight
width
* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm
1) Bucket without quick change adapter
2) Bucket with quick change adapter
R 926
ft carriage ft in ft carriage ft in
30 LC 30 LC
25 LC 9,3* 9,3* 18’10” 25 LC 8,5* 8,5* 19’ 9”
20 LC 14,4* 14,4* 8,9* 8,9* 22’11” 20 LC 13,9* 13,9* 8,1* 8,1* 23’ 8”
15 LC 18,9* 18,9* 14,5 15,8* 10,2 10,9* 9,0* 9,0* 25’ 4” 15 LC 18,1* 18,1* 14,5 15,3* 10,2 12,3* 8,2* 8,2* 26’ 1”
10 LC 20,8 23,5* 13,8 17,8* 9,9 15,1* 9,0 9,5* 26’ 8” 10 LC 20,9 22,8* 13,8 17,4* 9,9 14,8* 8,6 8,7* 27’ 4”
5 LC 19,4 27,2* 13,1 19,7* 9,6 15,5 8,6 10,6* 27’ 5 LC 19,5 26,7* 13,1 19,4* 9,6 15,5 8,3 9,5* 27’ 7”
0 LC 17,7* 17,7* 18,8 28,4* 12,6 20,7* 9,3 15,2 8,7 12,4* 26’ 3” 0 LC 18,9* 18,9* 18,8 28,3* 12,6 20,5* 9,3 15,2 8,4 11,1* 26’11”
– 5 LC 32,0* 32,0* 18,7 27,4* 12,5 20,4* 9,5 15,6 24’ 7” – 5 LC 30,8* 30,8* 18,6 27,6* 12,4 20,4* 9,2 15,1 9,1 14,0* 25’ 2”
– 10 LC 32,9* 32,9* 18,9 24,4* 12,6 18,2* 11,4 16,5* 21’ 6” – 10 LC 34,2* 34,2* 18,8 24,9* 12,5 18,6* 10,8 16,0* 22’ 4”
– 15 LC 24,0* 24,0* 18,0* 18,0* 16,1* 16,1* 16’ 6” – 15 LC 25,6* 25,6* 19,1* 19,1* 15,6 16,0* 17’ 6”
20 LC 13,2* 13,2* 7,2* 7,2* 24’ 9” 20 LC 8,5* 8,5* 6,4* 6,4* 25’10”
15 LC 14,6* 14,6* 10,3 13,1* 7,2* 7,2* 27’ 1” 15 LC 13,9* 13,9* 10,3 12,8* 6,4* 6,4* 28’
10 LC 34,8* 34,8* 21,2 21,8* 13,9 16,8* 9,9 14,3* 7,5* 7,5* 28’ 3” 10 LC 32,8* 32,8* 20,7* 20,7* 13,9 16,1* 9,9 13,9* 6,6* 6,6* 29’ 2”
5 LC 19,6 26,0* 13,1 18,9* 9,5 15,4* 7,8 8,2* 28’ 6” 5 LC 17,5* 17,5* 19,8 25,2* 13,1 18,4* 9,5 15,0* 7,2* 7,2* 29’ 6”
0 LC 19,7* 19,7* 18,8 28,0* 12,6 20,3* 9,2 15,1 7,9 9,5* 27’10” 0 LC 20,3* 20,3* 18,8 27,7* 12,6 20,0* 9,2 15,1 7,5 8,2* 28’10”
– 5 LC 29,2* 29,2* 18,5 27,8* 12,3 20,5* 9,1 15,0 8,5 11,7* 26’ 3” – 5 LC 28,0* 28,0* 18,4 27,9* 12,2 20,4* 9,0 14,9 8,0 10,0* 27’ 3”
– 10 LC 35,9* 35,9* 18,6 25,5* 12,4 19,0* 10,0 15,4* 23’ 5” – 10 LC 35,8 37,4* 18,5 26,1* 12,2 19,3* 9,3 13,5* 24’ 7”
– 15 LC 28,0* 28,0* 19,1 20,5* 13,7 15,6* 18’11” – 15 LC 30,1* 30,1* 18,9 21,7* 12,6 15,6* 12,3 15,2* 20’ 4”
Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lb x 1,000, and can be lifted 360° on firm, level supporting
surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30” wide triple-grouser pads. Indicated loads are
based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are limited through the allowed lift capacity of the load
hook on the quick change adapter (26,455 lb). Without quick change adapter the lift capacities will increase by 551 lb, without bucket cylinder, link and lever they
increase by an additional 827 lb.
10
Max. digging depth ft in 18’ 3” 18’10” 19’10” 20’10”
30 9 Max. reach at ground level ft in 31’10” 32’ 6” 33’ 6” 34’ 3”
Max. dump height ft in 24’ 1” 24’ 5” 25’ 3” 25’11”
8
25 Max. teeth height ft in 34’ 7” 35’ 1” 35’ 9” 36’ 5”
7
20 6 Digging Forces
without Quick Change Adapter 1 2 3 4
5
15
Digging force ISO lbf 35,969 33,946 31,248 29,000
4
lb 35,935 33,951 31,306 28,881
10 3 Breakout force ISO lbf 43,388 43,388 43,388 43,388
lb 43,431 43,431 43,431 43,431
2 with Quick Change Adapter
5
1 Digging force ISO lbf 34,171 32,373 29,900 27,876
lb 34,172 32,408 29,983 27,778
0 0 Breakout force ISO lbf 37,768 37,768 37,768 37,768
lb 37,699 37,699 37,699 37,699
-1
-5
-2
Operating Weight
-10 -3
and Ground Pressure
-4
-15 Operating weight includes basic machine with heavy duty counterweight,
-5 straight gooseneck boom 19’8”, stick 8’10”, quick change adapter 48 and
1 bucket 1.24 yd3.
-6 2
-20 3
4 Undercarriage LC
-7
11 10 9 8 7 6 5 4 3 2 1 0 m Pad width in 20” 24” 30”
Weight lb 58,643 59,194 60,848
35 30 25 20 15 10 5 0 ft Ground pressure psi 9.1 7.7 6.4
Weight
width
* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm
1) Bucket without quick change adapter
2) Bucket with quick change adapter
R 926
ft carriage ft in ft carriage ft in
30 LC 30 LC
25 LC 9,5* 9,5* 20’ 25 LC 11,3* 11,3* 8,7* 8,7* 20’10”
20 LC 19,2* 19,2* 14,8 16,6* 8,9* 8,9* 23’10” 20 LC 14,9 16,2* 8,2* 8,2* 24’ 6”
15 LC 32,3* 32,3* 22,1 22,2* 14,3 17,8* 10,1 14,3* 8,9* 8,9* 26’ 3” 15 LC 30,7* 30,7* 21,5* 21,5* 14,3 17,4* 10,1 14,9* 8,1* 8,1* 26’10”
10 LC 20,5 26,0* 13,6 19,4* 9,8 15,8 8,5 9,3* 27’ 6” 10 LC 20,6 25,5* 13,6 19,1* 9,8 15,7* 8,2 8,5* 28’ 1”
5 LC 19,2 28,4* 12,9 20,6* 9,5 15,4 8,2 10,1* 27’ 9” 5 LC 19,2 28,1* 12,9 20,4* 9,5 15,4 7,9 9,1* 28’ 4”
0 LC 18,7 27,9* 12,5 20,7* 9,3 15,2 8,3 11,5* 27’ 1” 0 LC 14,6* 14,6* 18,6 28,0* 12,5 20,7* 9,2 15,1 8,0 10,4* 27’ 8”
– 5 LC 28,3* 28,3* 18,6 25,3* 12,4 19,3* 9,3 14,4* 9,1 14,0* 25’ 5” – 5 LC 27,2* 27,2* 18,5 25,7* 12,3 19,5* 9,2 14,8* 8,7 12,6* 26’
– 10 LC 24,7* 24,7* 18,9 20,5* 12,6 15,7* 10,8 13,0* 22’ 6” – 10 LC 26,3* 26,3* 18,8 21,3* 12,5 16,2* 10,2 12,8* 23’ 3”
– 15 LC – 15 LC
25 LC 12,2* 12,2* 7,6* 7,6* 22’ 1” 25 LC 12,2* 12,2* 6,8* 6,8* 23’ 5”
20 LC 15,0 15,5* 9,5* 9,5* 7,2* 7,2* 25’ 8” 20 LC 14,7* 14,7* 10,4 10,6* 6,4* 6,4* 26’10”
15 LC 20,5* 20,5* 14,4 16,8* 10,2 14,7* 7,1* 7,1* 27’10” 15 LC 19,5* 19,5* 14,5 16,2* 10,2 14,2* 6,3* 6,3* 28’11”
10 LC 20,8 24,6* 13,7 18,6* 9,8 15,4* 7,4* 7,4* 29’ 1” 10 LC 37,9* 37,9* 21,1 23,7* 13,7 18,1* 9,8 15,1* 6,6* 6,6* 6,5* 6,5* 30’
5 LC 19,3 27,7* 12,9 20,1* 9,4 15,4 7,5 7,9* 29’ 4” 5 LC 19,5 27,1* 13,0 19,8* 9,4 15,4 7,2 8,3* 7,0* 7,0* 30’ 3”
0 LC 16,0* 16,0* 18,6 28,2* 12,4 20,6* 9,2 15,1 7,6 8,9* 28’ 8” 0 LC 16,7* 16,7* 18,6 28,2* 12,4 20,5* 9,1 15,0 7,2 7,7* 29’ 8”
– 5 LC 25,9* 25,9* 18,4 26,3* 12,2 19,7* 9,1 14,9 8,1 10,6* 27’ 2” – 5 LC 24,8* 24,8* 18,3 26,8* 12,2 19,9* 9,0 14,9 7,7 9,1* 28’ 2”
– 10 LC 28,8* 28,8* 18,6 22,3* 12,3 17,0* 9,5 12,5* 24’ 5” – 10 LC 31,0* 31,0* 18,4 23,3* 12,2 17,6* 9,1 12,8* 8,8 11,7* 25’ 7”
– 15 LC 15,4* 15,4* 10,7* 10,7* 10,5* 10,5* 20’ 2” – 15 LC 17,0* 17,0* 12,4* 12,4* 10,6* 10,6* 21’ 7”
Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lb x 1,000, and can be lifted 360° on firm, level supporting
surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30” wide triple-grouser pads. Indicated loads are
based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are limited through the allowed lift capacity of the load
hook on the quick change adapter (26,455 lb). Without quick change adapter the lift capacities will increase by 551 lb, without bucket cylinder, link and lever they
increase by an additional 827 lb.
Three piece track guide • Sunroof, right window and windshield with safety glass •
Sprocket with dirt ejector • Control cab Advanced •
Lashing eyes • Completely retractable windshield •
Two-stage travel motors • Front windshield (bottom) retractable •
Closed storage space •
Rubber floor mat •
Dome light •
Coat hook •
Uppercarriage Automatic air conditioning Advanced •
Handrails, non slip surfaces • Fuel consumption indicator •
Engine hood with lift assistance • Liebherr-Air-Comfort seat heated with air-suspension •
Sound insulation • 7” color multifunction display with touchscreen •
Maintenance-free swing brake lock • Emergency exit rear window •
Maintenance-free HD-batteries • Preparation for radio installation •
Lockable tool box • Single piece right-side window (no post) •
Tool kit • Rain visor over front window opening •
Tinted windows •
Door with sliding window •
Height-adjustable operating console •
Seat belt •
Hydraulics Sun roller blind •
Hydraulic tank shut-off valve and pumps • Load bearing sectional profile structure, covered with deep-drawn panels •
Pressure test ports for hydraulic • Wiper/washer •
Pressure storage for controlled lowering of equipment with engine Cigarette lighter and ashtray •
turned off • Two flood lights under rain visor •
Electronic pump regulation •
Filter with integrated fine filter area (5 µm) •
Stepless work mode selector •
Positive Control Advanced •
Regeneration Plus function on hydraulic circuit •
Attachment
Electronic control logic • Two separate pins for hoist cylinder with cast parts •
26,455 lb lifting hook with safety link on quick-coupler •
Liebherr full-automatic central lubrication system
(except connecting link for bucket kinematics) •
Additional work light on boom (right) •
Engine Cylinders with shock absorbers •
Turbo charger • Load hold valves on hoist cylinders •
Conform with level IIIA / Tier 3 emission standard •
After-cooled •
Unit pump system injection •
Sensor controlled engine idling •
Dry-type air cleaner w/pre-cleaner, main and safety element •
•
= Standard
R 926
Straight track guide + Electric cooler +
D6C conversion kit with 3-piece track guide + Cab with bullet-proof glass (front and roof windows) and roof window
wipers +
LIDAT Standard (Liebherr data transfer system) +
LIDAT Plus (extended Liebherr data transfer system) +
Air pressure operator seat •
Uppercarriage Premium operator seat +
Electric refuel pump + Engine shut-down (via push-button) in cab +
Reversible fan drive + Bullet-proof roof glass panel with wiper +
Customized colors + Radio with SD-/MMC-card, Aux-in +
Extended tool kit + Rear view monitoring with camera +
Beacon +
Wiper for sunroof +
Xenon headlights +
Protective grid up FOPS +
Hydraulics Protective grid front FGPS +
Add-on kit rotary drive (including routing) + Sun visor +
Bio-degradable hydr. oil + Roof sun screen +
Grapple operation (including routing) + Auxiliary heating with timer +
Liebherr proportional control system + Change over controls for clamshell bucket/grapple +
Liebherr Tool Control + Electronic theft protection +
Bypass filter + Additional halogen headlights behind cab +
Return filter for hammer + Additional halogen headlights front cab +
Engine Attachment
Fuel pre-heating + Adjustable boom +
Liebherr particle filter + Adjustable offset boom +
Air pre-filter with dust trap + Hoist cylinder depth limitation +
Automatic engine shut-down (adjustable time-period) + Security for hoist cylinders +
Piston rod cover bucket cylinder +
26,455 lb lifting hook on bucket +
LIKUFIX +
Liebherr line of buckets +
Straight gooseneck boom +
Safety check valves hoist cylinder +
Safety check valves stick cylinder +
Hose-protecting lubrication system (stick rear) +
Hydr. or mechanical quick change coupler +
Overload warning device +
Central lubrication of the connecting link for bucket kinematics +
Working headlight on boom (left) +
•
= Standard, + = Option
www.liebherr.us