Professional Documents
Culture Documents
Standpoint About Tender For Gas Tube Project
Standpoint About Tender For Gas Tube Project
STANDPOINT
After a narrow review and detailed analysis of the documents submitted for
participation in an open procedure for Supervision over the construction of the gas pipeline of
the Republic of Macedonia, lot 1, section: Klechovce Shtip - Negotino, found out that SGS
Bulgaria can cover the Employers requirements, as follows:
Hold the appropriate Licenses for supervision and Licenses for revision of project
documentation.
Positive financial report;
More than 35 (thirty five) employed engineers, with authorization for performing
supervision over the construction of buildings in the field of civil engineering,
geotechnics, geodesy, environment, mechanical engineering or electrotechnology.
More than 20 (twenty) employed engineers, with authorization for designing buildings
in the field of civil engineering, geotechnics, geodesy, environment, mechanical
engineering or electrotechnology
Key Expert
Support team
The information stated in this report (or certificate) is derived from the
results of inspection or testing procedures carried out in accordance with
the instructions of our Client, and/or our assessment of such results on
the basis of any technical standards, trade custom or practice, or other
circumstances which should in our professional opinion be taken into
account.
STANDPOINT
Group Non-destructive testing":
Control (NDT) of equipment, facilities, storage tanks and pipelines under construction,
reconstruction and modernization during the operation and maintenance with nondestructive methods, namely:
visual testing (VT)*;
magnetic particle testing (MT)*;
penetrant testing (PT)*;
leak testing (LT)*;
ne-sided ultrasonic thickness measurement of metal walls (UTM)*.
The information stated in this report (or certificate) is derived from the
results of inspection or testing procedures carried out in accordance with
the instructions of our Client, and/or our assessment of such results on
the basis of any technical standards, trade custom or practice, or other
circumstances which should in our professional opinion be taken into
account.