Professional Documents
Culture Documents
Standardi Dati Tenderskom Dokumentacijom
Standardi Dati Tenderskom Dokumentacijom
Standardi Dati Tenderskom Dokumentacijom
2 Standards
1.- 60 E1 type of rail of the mass 60,21 kg/m' in accordance with EN 13674-1 or UIC60
type of rail of the mass 60,34 kg/m .
The rails must be of R260 quality and the outer rail in R<350 m curves must be of
R350HT quality.
2) Wooden sleeper with K fastenings for 49E1 rails with a pad under the rail.
(after the transition piece in stations).
Standards:
a) Wooden sleeper, cut, sharp - edged, beech, impregnated piece 1 JUS D.D1.020,
JUS D.T4.020,
dimensions 0,26x0,16x2,60 m JUS B.H8.510,
JUS DT4.062
b) ''K'' fastenings for 1 sleeper
- Grooved baseplate (made by cutting) piece 2 JS G1.101,
UIC 864-6,
JUS P.B1.910
- Coach screw l=150 mm piece 8 JS G1.341,
UIC 864-1
- T shaped anchoring screw for rails piece 4 JS G1.315,
UIC 864-2
- Nut M22x25 piece 4 JS G1.330
- Double elastic ring pad piece 4 JS G1.326,
UIC 864-3
- Rail clip (made by cutting) piece 4 JUS P.B1.170,
JUS P.B1.910
c) Pad under the rail (SPT-49-1) piece 2 HN G1.601/1,
HN G2.601,
UIC 864-5
3) Wooden sleeper, with K fastening for 60 E1 type of rail and pad under the rail.
a) Wooden sleeper, cut, sharp - edged, beech, impregnated piece 1 JUS D.D1.020,
JUS D.T4.020,
dimensions 0,26x0,16x2,60 m JUS B.H8.510,
JUS DT4.062
b) ''K'' fastenings for 1 sleeper
- Grooved baseplate (made by cutting) piece 2 JS G1.111,
UIC 864-6
JUS P.B1.910
- Coach screw l=150 mm piece 8 JS G1.341,
24
UIC 864-1
- T shaped anchoring screw for rails piece 4 JS G1.315,
UIC 864-2
- Nut M22x25 piece 4 JS G1.330
- Double elastic ring pad piece 4 JS G1.326,
UIC 864-3
- Rail clip (made by cutting) piece 4 JUS P.B1.170,
JUS P.B1.910
c) Pad under the rail (SPT-60-1) piece 2 HN G1.601,
HN G2.601,
UIC 864-5
25
7) Bridge sleeper, oak, sharp - edged, impregnated JUS D.D1.022,
JUS D.T4.020,
Dimensions according to specifications JUS B.H8.510,
JUS DT4.062
Replace the length of sleepers on bridges of 3553 cm with the length of 350 cm and the
length of 305 cm with 300 cm.
8) Concrete sleeper, with elastic fastenings for 60 E1 type of rails with pad under
the rail.
Standards:
a) Concrete sleeper, one - piece, prestressed 2,60 m long, piece 1 EN 13230-1,
EN 13230-2,
of the weight cca 300 kg and stock surface of 6800 cm2 EN 13230-4
(made of igneous or limestone aggregate)
b) Fastenings for 1 sleeper
- Elastic clip with hardness of 400460 HV piece 4 DIN EN 10089,
DIN EN ISO 6507
- Coach screw piece 4 UIC 864-1,
DIN EN ISO 898 T 1
strength upon stretching min. 500 N/mm2
rupture ductility min. 20 %
yield stress min. 300 N/mm2
- Plastic inclined baseplate piece 4
> 40 kJ/m2 DIN EN ISO 179
densityspecific weight 1,351,45 g/cm3 DIN 53479
26
9) a) Switch of the type UIC 60-200-6 JS G1.401,
JS G0.401,
JS G2.402,
JS G0.400
b) Switch of the type UIC 60-300-6 JS G1.404,
JS G0.401,
JS G2.402,
JS G0.400
Note: left and right switches need to be separated
10) Rail anchoring device for rails of the type 60E1 and 49E1 with wooden JS G1.070
and reinforced concrete sleepers
The device is made of steel sheet s.0451 JUS C.BO.500,
JUS. C.B4.110
11) Device against side displacement wooden sleeper JS G1.071
The device is made of steel sheet s.0300 JUS C.B4.110
The following material accompanies the device:
- Coach screw 18x110 piece 2 JUS P.B1.121
- Screw M12x60 V2 piece 1 JUS M.B1.053
- Nut M12x12 V1A piece 1 JUS M.B1.606
12) Device against side displacement concrete sleeper JS G1.072
The device is made of steel sheet s.0300 JUS C.B4.110
The following material accompanies the device:
- Screw M12x262 V2 pieces1 drawing according to
JS G1.072
- Nut M12x12 V1A pieces 1 JUS M.B1.606
Note: the shape and dimension of the device must correspond to the selected type of
concrete sleeper.
13) Ballast chips of igneous material JS G2.011
- Defining the resistance of the ballast chips for the ballast JUS B.B8.016
of railway lines according to pressure and impact
- Defining the bulk density in loose and compresses state JUS B.B8.030
- Testing of the compressive strength JUS B.B8.012
- Bulk density and specific weight of the stone JUS B.B8.032
- Particle shape determination JUS B.B8.048
- Water absorption JUS B.B8.031
- Resistance to abrasion and crushing according to the JUS B.B8.045
27
Los Angeles method
28
baseplates for horizontal screws pieces 104 quality according
to JS G1.328
baseplates for vertical screws pieces 88 quality according
to JS G1.328
Products that are in compliance with other standards or technical references approved
by internationally acknowledged standardization institutions in other countries are
acceptable, but they have to at least correspond in essence to the listed references
(Public Procurement Law, Article 14, Clause 2-a-3)