Professional Documents
Culture Documents
EASA M6 Study Notes
EASA M6 Study Notes
Inspection rings are installed only on the bottom wing part unless installed on the
top by the manufacturer
Drain holes should be cut only with small blade knives
Polyester cover lasts around 20-30 years
All overlapped and doped seams shall be made only over underlying support
structures extending backing the full width of the seam
Polyester is the most lightweight cloth
Springs
Belleville springs are cone washer springs with short axial length
Overheating ruins the spring
Special rig test is used for spring testing
Spring index is the ratio of mean coil diameter to wire diameter C=D/d
Bearings
Spherical roller bearings resist high radial and moderate axial loads
Thrust bearings resist axial loads only
Thrust bearings cannot be used high speed rotational loads
Control cables use sealed bearings
Needle bearings resist high radial loads
Tapered roller bearings are used in wheel hubs
Transmissions