Professional Documents
Culture Documents
Pala Hitachi
Pala Hitachi
Location
Dealer Name
Customer Name
CONTENTS
INTRODUCTION .................................................................................................................................. 2
DISTRIBUTION OF THE INSPECTION SHEET .................................................................................. 3
DEFINITION OF THE DEFECT LENGTH IN ULTRA-SONIC TESTING .............................................. 4
INSPECTION PROCEDURE................................................................................................................ 6
EVALUATION OF DEFECT HEIGHT (H) BY DISTANCE CORRECTION TECHNIQUE AT INTERNAL
BULKHEAD .......................................................................................................................................... 8
ULTRA-SONIC EXAMINATION REPORT FOR THE STRUCTURE ....................................... Sheet 01
INTRODUCTION
We have already introduced the "EX5600-6 Recommended Preventive Service program" to our customers to
promote good preventive service for the EX5600-6 in the field.
However, to effectively check for various kinds of cracks on welded structures like the Front Attachment Main and
Track Frame etc., periodical examination using an Ultrasonic Flaw Detector is indispensable.
This Inspection sheet is provided for easy checking of the condition of these structures on the EX5600-6 by
using our portable ultrasonic instrument series, the HITACHI UT SERIES. By executing periodical inspection
with the UT, an appropriate maintenance time can be recommended to your customer before the occurrence of a
lengthy downtime caused by increased cracks.
We believe that you will be able to:
1.
2.
3.
4.
Prevents
trouble
Reduces
repair
costs
Reduces
downtime
Extends
machine
life
Defect is here defined as that, although varied slightly with welding technique, to be judged acceptable
from the stand point of welding structure.
H: Defect height
L: Defect length
P: Center-to-center distance between defects
1.
1) H:
2 mm (0.08 in.) or less is acceptable.
2) L:
40 mm (1.6 in.) or less is acceptable.
P:
Although the H and L of defect are acceptable
as stated above, center-to center distance
between defects shall be 200 mm (7.87 in.) or
more.
NOTE: No defect is allowed in the range of
50 mm (2.1 in.) on each side of
butt-weld joint.
3) If defect exceeds the above-mentioned limit, it
shall be rejected.
Fig. 1
Backing plate
Detail a
Detail b
Fig. 2
Fig. 3
2.
Fig. 4
Root face A
3.
Detail c
h:
Total height of
insufficient fusion
Fig. 5
Fig. 6
Root face A
4.
Other
Detail d
h:
Total height of
insufficient fusion
Fig. 7
INSPECTION PROCEDURE
4.
6. Judgement
Acceptable
Not Acceptable
Flaw Size
Flaw height is 5% or
less of plate thickness.
II
Flaw height is 5% to
10% of plate thickness.
III
IV
h:
Echo height
w (X): Beam distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
Probe
Crack
Root face
Crack
Pattern 2:
Sides A & B Open surface crack
Sides C & D Internal defect
Pattern 3:
Sides A & C Internal defect
Sides B & D Open surface crack
When root face is 5 mm or less, All of A, B, C
and D are internal defects.
Crack
Root face
Pattern 4:
Sides A & C Internal defect
Sides B & D Open surface crack
NOTE:
If the position of the defect is not clear or
when judgement is impossible, defects are
judgement to be internal ones.
Crack
Root face
Sheet 01
EX5600-6
:
Inspection by
Specifications
Front att.
S/N
Front att.
Backhoe front
Capacity
Hour meter
Boom
Arm
Bucket
m3
Date of
Inspection
D
Hour
(Hitachi use)
(Hitachi use)
Type of work
Date of
Delivery
INDEX
Track Frame Sheet 2 - 5
Backhoe Boom Sheet 6 - 23
Backhoe Arm Sheet 24 - 32
COMMENT
Sheet 01
(IF NECESSARY)
Dealer: Original
Hitachi: 1 Copy
Reflection
Type of Probe
Ditto
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A45
Left
Right
(8 positions)
Inspection area
Rear side
Upper side
Lower side
Sheet 02
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the position on a
circle.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
Upper side View
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Reflection
Type of Probe
Ditto
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60 or
5C10 x 10A45
Left
Right
(4 positions)
Rear side
Upper side
Sheet 03
Lower side
Inspection area
Inspection area
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from the top plate or the distance (mm) from
the bottom plate.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
I = .............................
Flaw position =
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Reflection
Type of Probe
Ditto
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60
Left
Right
Area
120 mm only
(4 positions)
Rear side
Inspection area
Upper side
Lower side
Inspection area
Sheet 04
Detail
Mark the location where defect found
Flaw position
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
F
R
O
N
T
de = ..........................
H = ...........................
I = .............................
Flaw position =
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Hitachi: 1 Copy
R
E
A
R
w (X) = .....................
y (PFD) = .................
de = ..........................
Flaw position =
H = ...........................
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Reflection
Type of Probe
Ditto
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A45
Left
(4 positions)
Right
Area
120 mm only
Rear side
Upper side
Sheet 05
Inspection area
Lower side
Inspection area
Detail
Mark the location where defect found
Flaw position
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
F
R
O
N
T
de = ..........................
H = ...........................
I = .............................
Flaw position =
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Hitachi: 1 Copy
R
E
A
R
w (X) = .....................
y (PFD) = .................
de = ..........................
Flaw position =
H = ...........................
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
Ditto
are
ion
ct
spe
(10
*30
0
0 )
In
*30
A
t
Lef ht
Rig
tion
ec
nsp
are
(3 positions)
Detailed Inspection Position
Rear side
Front side
Right
Left
Sheet 06
(2 positions)
Righ
Left
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Front side
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
Flaw position =
H = ...........................
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
Ditto
na
tio
pec
*40
Ins
t
Lef ht
Rig
(2 positions)
Detailed Inspection Position
Front No. 001 -
Front side
Rear side
Right
Left
Righ
Left
Sheet 07
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
Front side
h = ............................
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
Flaw position =
H = ...........................
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
Ditto
C
Inspection area
t
Lef ht
Rig
(2 positions)
Front side
Rear side
Right
Left
t
Righ
Left
Sheet 08
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
Front side
h = ............................
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
Ditto
ction
Inspe
*400
t
Lef ht
Rig
500
(2 positions)
area
Front side
Rear side
Right
Left
t
Righ
Left
Sheet 09
Detail
Mark the location where defect found
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
Front side
y (PFD) = .................
R
I
G
H
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Flaw position =
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
Front side
h = ............................
Hitachi: 1 Copy
L
E
F
T
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60 or
5Z10 x 10A45
Ditto
t
Lef ht
Rig
ion
ct
spe
are
In
Front side
Rear side
Right
Left
Righ
Left
Sheet 10
Detail
Mark the location where defect found
Flaw position
Front side
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
R
I
G
H
T
de = ..........................
H = ...........................
I = .............................
Flaw position =
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
Front side
h = ............................
Hitachi: 1 Copy
L
E
F
T
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60 or
5Z10 x 10A45
Ditto
t
Lef ht
Rig
(2 positions)
Inspection area
Front side
Rear side
Inside View F
Right
Left
Righ
Left
Sheet 11
Detail
Mark the location where defect found
Flaw position
Front side
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
R
I
G
H
T
de = ..........................
H = ...........................
I = .............................
Flaw position =
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
Front side
h = ............................
Hitachi: 1 Copy
L
E
F
T
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
Ditto
t
Lef ht
Rig
(1 position)
Front side
Righ
Left
*300
*300 (1000)
Rear side
Right
Left
ction
Inspe
area
Sheet 12
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
Front side
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
Ditto
t
Lef ht
Rig
ction
Inspe
area
(2 positions)
Front side
Rear side
Right
Left
t
Righ
Left
Sheet 13
Detail
Mark the location where defect found
Flaw position
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
Front side
y (PFD) = .................
R
I
G
H
T
de = ..........................
H = ...........................
I = .............................
Flaw position =
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
Front side
h = ............................
Hitachi: 1 Copy
L
E
F
T
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
Ditto
2.5
15
Within the
range of
*400
t
Lef ht
Rig
(1 position)
Front side
*400
Rear side
Righ
Left
ction
Inspe
area
Right
Left
Sheet 14
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
Front side
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Under side view
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
Ditto
t
Lef ht
Rig
(1 position)
Front side
Rear side
J
t
Righ
Left
ction
Inspe
area
Right
Left
Sheet 15
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
Front side
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Under side view
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Ditto
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
Detail f
Detailed Inspection Position
Ins
pec
tion
are
25
15
35
7
20
40
25
25
(2 positions)
Finish the
entire length
by grinding.
t
Lef ht
Rig
Ins
pec
tion
are
Front side
Rear side
Right
Left
Righ
Left
Sheet 16
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
w (X) = .....................
Hitachi: 1 Copy
Front side
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Ditto
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
35
15
22
Ins
22*0
tion
pec
are
20
Front side
Rear side
(2 positions)
Right
Left
Righ
Left
are
Ins
tion
pec
22*0
40*0
100
65
12
t
Lef ht
Rig
(37)
25
25
40*0
100
Sheet 17
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
Front side
h = ............................
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Ditto
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
t
Lef ht
Rig
(2 positions)
Front side
Rear side
Righ
Left
*
*
200 300 300 200
Inspection area
Inspection area
M
Right
Left
Sheet 18
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
Front side
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Under side view
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Ditto
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60 or
5Z10 x 10A45
t
Lef ht
Rig
Inspection area
Front side
Rear side
Right
Left
Righ
Left
Sheet 19
Detail
Mark the location where defect found
Flaw position
Front side
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
R
I
G
H
T
de = ..........................
H = ...........................
I = .............................
Flaw position =
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
Front side
h = ............................
Hitachi: 1 Copy
L
E
F
T
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Ditto
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60 or
5Z10 x 10A45
t
Lef ht
Rig
(2 positions)
Inspection area
Front side
Rear side
O
t
Righ
Left
Right
Left
Inside View o
Sheet 20
Detail
Mark the location where defect found
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
R
I
G
H
T
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Flaw position =
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Hitachi: 1 Copy
L
E
F
T
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Detail h
Ditto
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
Detail h
Detailed Inspection Position
pec
tion
200
200
Within the
range of *200
from the both
ends.
are
t
Lef ht
Rig
Ins
pec
tion
are
a
Section p
(2 positions)
Front side
Rear side
Right
Left
t
Righ
Left
Sheet 21
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Front side
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Ditto
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
Ins
pec
tion
0 *
50
t
Lef ht
Rig
*50
are
Ins
pec
tion
(2 positions)
are
Section q
Front side
Rear side
Right
Left
t
Righ
Left
Sheet 22
Flaw position
Mark position of the
crack (A - B) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Front side
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5Z10 x 10A45 and
2C10 x 10A45
Ditto
t
Lef ht
Rig
(1 position)
Front side
Rear side
Righ
Left
ction
Inspe
area
Right
Left
Sheet 23
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
Front side
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Under side view
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A45 and
2C10 x 10A45
Ditto
Detail j
Detailed Inspection Position
Inspe
Inspe
40
R35 - R45
ction
A
35
A
22
22
35
250
25*0 * 25
250 0
ction
40
*520
Left
Righ
t
area
A
B
area
Left
Righ
t
(2 positions)
Detailed Inspection Position
Rear side
Front side
(40)
30
20
45
Sheet 24
(22)
(2 positions)
14
Right
Left
Right
Left
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Front side
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60,
5C10 x 10A45 and
2C10 x 10A45
Ditto
Detail h
Detailed Inspection Position
Front No. 001 (40)
Left
Righ
t
ectio
n are
20
30
8
4
22
Insp
14
30
45
B
(22)
G
Left
Righ
t
Finish all
surfaces by
grinding.
(1 position)
Rear side
Sheet 25
Right
Left
Front side
Right
Left
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
Upper side view
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Front side
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60,
5C10 x 10A45 and
2C10 x 10A45
Ditto
Detail g
Detailed Inspection Position
Front No. 001 -
Left
Righ
t
(28)
10
15 (22)15
G
15 35
15 G
Left
Righ
t
In the range of
*500
Insp
ectio
n are
Rear side
Sheet 26
Right
Left
50*0
(2 positions)
C
Front side
Right
Left
Detail
Mark the location where defect found
Flaw position
Front side
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
R
I
G
H
T
de = ..........................
H = ...........................
I = .............................
Flaw position =
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
Front side
h = ............................
Hitachi: 1 Copy
L
E
F
T
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Ditto
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60,
5C10 x 10A45 and
2C10 x 10A45
Detail v
Inspe
ction
20*0
Left
Righ
t
240
35
60
20
20
10
35
area
Left
Righ
t
15
G
22
(2 positions)
Rear side
Sheet 27
Right
Left
Front side
Right
Left
Flaw position
Mark position of the
crack (A - B) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Front side
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60
Ditto
Detail h
Detailed Inspection Position
Front No. 001 -
Left
Righ
t
30
R1
50
40
(22)
Left
Righ
t
20
(1 position)
Front side
Right
Left
*
520
Rear side
Sheet 28
Inspection area
Right
Left
Flaw position
Mark position of the
crack (A - B) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
Front side
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60,
5C10 x 10A45 and
2C10 x 10A45
Ditto
Detail p
Detailed Inspection Position
Front No. 001 -
Left
Righ
t
20
(22)
40
45
7
20
Left
Righ
t
(1 position)
Detailed Inspection Position
(22)
30
Inspection area
30
40
Front side
Rear side
20
380 *
*
200 200
Sheet 29
(1 position)
100
Right
Left
Inspection area
Right
Left
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
Front side
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Under side view
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Ditto
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60,
5C10 x 10A45 and
2C10 x 10A45
Left
Righ
t
Inspection area
H
View H
27
16
35
35
Left
Righ
t
(1 position)
Front side
Rear side
Right
Left
Right
Left
Sheet 30
Detail
Mark the location where defect found
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
R
I
G
H
T
de = ..........................
H = ...........................
I = .............................
Flaw position =
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
Front side
h = ............................
Hitachi: 1 Copy
L
E
F
T
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Ditto
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60,
5C10 x 10A45 and
2C10 x 10A45
Left
Righ
t
Left
Righ
t
Inspe
ction
area
(2 positions)
Front side
Rear side
Right
Left
Right
Left
Sheet 31
Detail
Mark the location where defect found
Flaw position
Front side
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
R
I
G
H
T
de = ..........................
H = ...........................
I = .............................
h:
w (X):
Flaw position =
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
Front side
h = ............................
Hitachi: 1 Copy
L
E
F
T
w (X) = .....................
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Method
Inspection
Reflection
Type of Probe
Angle probe
2.25Z10 x 18A70
Angle probe
5C10 x 10A60,
5C10 x 10A45 and
2C10 x 10A45
Ditto
Detail s
Detailed Inspection Position
Left
Righ
t
22
20
(1 position)
Left
Righ
t
50
35
10
15
7
20
10
Front side
Rear side
*
200
240
Sheet 32
Right
Left
*
200
Inspection area
Inspection area
Right
Left
Flaw position
Mark position of the
crack (A - C) in the
detail column.
Detail
Mark the location where defect found
Fill in the defect position as the distance (mm)
from left or right side.
Echo data
Fill out the following column if
recording paper is not available
h = ............................
w (X) = .....................
y (PFD) = .................
de = ..........................
Front side
H = ...........................
I = .............................
h:
w (X):
Echo height
Beam
distance
y (PFD): Probe flaw
distance
de:
Flaw depth
H:
Flaw height
I:
Flaw length
h = ............................
Under side view
w (X) = .....................
Hitachi: 1 Copy
y (PFD) = .................
de = ..........................
H = ...........................
Flaw position =
I = .............................
Inspection Results
(UT2000 Recording Paper)
Judgement
Head Office:
Telephone:
Facsimile: