Professional Documents
Culture Documents
21256
21256
21256
PENILAIAN / EVALUATION
Tugasan ini menyumbang sehingga 40% daripada jumlah markah kursus
berkenaan. / This assignment accounts for 40% of the total marks for the
course.
Anda akan diberikan maklum balas tentang tugasan ini sebelum Peperiksaan
Akhir Semester bermula / You would be given feedback on the assignment
before the Final Semester Examination commences.
PLAGIARISME:
DEDUCTION
POTONGAN
MARKAH
PLAGIARISM:
MARKS
ASSIGNMENT QUESTION
Accuracy
Cleanliness
Good draughtsmanship
Line works
6. All answers must be submitted with a cover page (A4 size paper) containing the
following details:
Your name
Learning center
Matriculation number
Your tutors name
Your telephone and e-mail address
7.
8.
9.
Figure 1
(15 marks)
(b) Figure 2 shows three views of a shaped block in third angle projection. Draw
in full size the isometric view of the block in the direction of the arrow shown.
The size of the grid is 10 mm x 10 mm.
Do not show hidden details.
Figure 2
(10 marks)
QUESTION 2 (25%)
Figure 3 shows the top view and front view of a machine component in third angle
projection. An isometric drawing of the machine component is given on the right
hand top corner. Draw the following views with full size in first or third angle
projection:
(a)
(b)
(c)
Figure 3
Figure 4
(10 marks)
(b) Figure 5 shows the true shape of a template plate. Redraw the template in full
size. Print your drawing with the following lineweight (pen assignment):
1. Object lines = 0.6 mm
2. Others (if any) = default
3. At least show 4 dimensions
(10 marks)
Figure 5
Question 4 (30%)
Figure 6 shows an isometric view of a machine block. Draw the following views
with First or Third Angle Projection.
a.
A front view from the direction A,
b.
A side view from the direction B ; and
c.
The top view from (a).
All hidden details must be shown in all views. Insert two dimensions for each
view.
Print your drawing with the following lineweight and colors (pen assignment):
1.
2.
3.
4.
5.
Figure 6
(30 marks)