Professional Documents
Culture Documents
Scofield Stamped Spec
Scofield Stamped Spec
SCHEDULE 1 - REFERENCES
PRODUCT DATA SHEET 0 - American Concrete Institute (ACI):
0.1
0.2
0.3
0.4
0.5
0.6
ASTM C 260: Standard Specification for Air Entraining Admixtures for Concrete.
ASTM C 309: Standard Specification for Liquid Membrane-Forming Compounds for
Curing Concrete.
ASTM C 979: Standard Specification for Pigments for Integrally Colored Concrete.
321316.23 - 1
2.1
SCHEDULE 2 - SUBMITTALS
PRODUCT DATA SHEET 0 - Product Data: For the following products:
Edit to suit Project requirements.
0.1
0.2
0.3
0.4
0.5
321316.23 - 2
5.4
5.5
5.6
5.7
expansion joints according to Project requirements. Installer for the work to construct
mockup.
Notify Architect and Owner a minimum of seven calendar days in advance of the date
scheduled for each mockup construction.
Obtain the Architects and Owners acceptance of each mockup prior to
commencement of the work.
Each mockup to remain until completion of the work to serve as a quality control
standard for the work. Provide suitable protections to preclude damage to mockup.
Demolish and remove each mockup from site when directed.
Imprinting tools must be stored flat, textured face up, with no objects resting on top.
321316.23 - 3
PART 2 - PRODUCTS
SCHEDULE 0 - ACCEPTABLE MANUFACTURERS
PRODUCT DATA SHEET 0 - Basis of Design: Provide products specified herein manufactured
by L. M. Scofield Company (Scofield).
SCHEDULE 1 - MATERIALS
PRODUCT DATA SHEET 0 - Dry-Shake Colored Hardener: Cementitious material containing
special hard aggregates, formulated as a high opacity color hardening material for the top
surface of freshly place concrete substrates. Highly UV-resistant. Factory proportioned, mixed
and packaged, ready-to-use. Comply with ASTM C 979.
0.1
0.2
0.3
0.4
0.5
PRODUCT DATA SHEET 1 - Antiquing Release Agent: Colored, finely powdered material
formulated to break the bond between imprinting tools and surface of color-hardened concrete
while imparting an antiqued appearance.
1.1
1.2
If antiquing is not a requirement, delete paragraph above and select one of the following two
paragraphs.
PRODUCT DATA SHEET 2 - Low VOC Liquid Release Agent: Colorless, odorless liquid
formulated to break the bond between imprinting tools and surface of color-hardened concrete.
Evaporates completely, leaving no residue. VOC content less than 450 g/L (3.75lb/gal).
2.1
PRODUCT DATA SHEET 3 - Liquid Release Agent: Colorless, scented liquid formulated to
break the bond between imprinting tools and surface of color-hardened concrete. Evaporates
completely, leaving no residue.
3.1
Select curing and sealing compound from available choices in following two paragraphs, and to
suit Project requirements.
PRODUCT DATA SHEET 4 - Waterborne Curing Compound and Sealer: Low VOC waterborne
modified acrylic formulation. Complies with ASTM C 309.
4.1
321316.23 - 4
Verify grading will ensure a uniform concrete thickness during concrete placement.
321316.23 - 5
PRODUCT DATA SHEET 1 - At the time of concrete placement, subgrade must be moist,
completely consolidated, and free from frost. If necessary, subgrade may be dampened with
water prior to placement; however, freestanding water or soft, muddy, or frozen ground in not
permissible.
SCHEDULE 1 - CONCRETE PLACEMENT
PRODUCT DATA SHEET 0 - General: Place and spread concrete to completely fill all space
inside forms. Move concrete into place with square-tipped shovels or concrete rakes.
PRODUCT DATA SHEET 1 - Consolidate concrete by tamping or vibrating to provide a suitable
surface for finishing.
PRODUCT DATA SHEET 2 - Prior to appearance of excess moisture or bleed water, screed
concrete with wood or magnesium straight edge or mechanical vibrating screed.
PRODUCT DATA SHEET 3 - Continue concrete surface leveling and consolidation with highway
magnesium straight edge and (or) magnesium bull float.
PRODUCT DATA SHEET 4 - Mechanically float concrete surfaces to required flatness and
levelness as soon as concrete surface has taken its initial set and will support weight of a power
float machine equipped with float shoes or combination blades and operator.
4.1
material
has
absorbed
moisture,
321316.23 - 6
PRODUCT DATA SHEET 1 - Seal imprinted concrete with liquid membrane curing and sealing
compounds as recommended by manufacturer.
PRODUCT DATA SHEET 2 - Apply two coats of specified curing and sealing compound
according to manufacturers written instructions.
SCHEDULE 4 - PROTECTION OF FINISHED WORK
PRODUCT DATA SHEET 0 - Prohibit foot or vehicular traffic on the newly imprinted concrete
surface.
PRODUCT DATA SHEET 1 - Protect floor surface from damage throughout remainder of
construction period until Final Acceptance of the work. If a covering material is necessary,
surfaces must remain uncovered for a minimum of four days after which they may be covered
with a new, smooth, nonstaining reinforced kraft curing paper. Plastic sheeting is unacceptable
as a covering material.
SCHEDULE 5 - SCHEDULE
PRODUCT DATA SHEET 0 - Refer to Drawings for locations of stamped concrete paving
applications.
END OF SECTION 321316.23
Copyright 2011. L. M. Scofield. All rights reserved.
321316.23 - 7