Professional Documents
Culture Documents
Resume Mitesh Suneriya W CTC
Resume Mitesh Suneriya W CTC
Provided
Accommodation
Phone:+91 - 9977734667
E-mail :
miteshsuneriya@yahoo.com
miteshsuneriya@gmail.com
Objective
Strength
Education
Computer
Proficiency
Basic knowledge of Dos and Windows, MS Office, AutoCAD, C++, Internet etc.
Work Experience
Increase Productivity and quality by proper planning and utilization of resources and
manpower.
Check stock maintenance and status of available resources.
To maintain Daily Progress Report & Bill of material. Production & Manpower
management. In process Quality Control. Final inspection and maintaining contractor
protocol.
Client: ADNOC & ASCON ( BOROUGE INNOVATION CENTRE)
Duration : Sep. 2012 to March-2013
Scope of Work : Steel work of PEB, Skylight, Handrails, Walkways, MCC panel
enclosures, Entrance and Security gates with Aluminium cladding and doors worth
AED 6 Million.
Job Profile :
Dealing with client for technical approval and clearance of drawing and structural
work.
Responsible for checking procedure and quality of work at every stage and getting
approval of client to start next activities.
Preparation of work schedule on monthly/weekly / daily basis.
Structural steel fabrication & Erection. Responsible for erection planning&
achievements of targets.
Ensure quality and safety at work site.
2) 2 years ( 14 Sep. 2010 to 10 Aug. 2012 ) work experience as Sr. Engineer in "
Rohan builders india Pvt. Ltd. (RBIPL), Pune(Maharashtra.) , A division of Rohan
Groups. At present doing multi-crore project ( 16,000 MT steel structure ) under
MAHAN Aluminium Project of Hindalco industries Ltd., Bargawan, Singrauli
(M.P.), in the field of Steel structured building fabrication and erection of ABF,
PIPE RACK, AHS, ARS, CRS, AAS, CRUSHER HOUSE, COMPRESSOR HOUSE,
CAST HOUSE FURNACE BAY, CASTING BAY etc. buildings.
Client: Hindalco Industries Ltd.
Job Profile :
Dealing with client for technical approval and clearance of drawing and structural
work along with alignment approval.
Responsible for checking procedure and quality of work at every stage and getting
approval of Client to start next activities.
Review drawing, technical, specifications and distribution of drawing.
Estimate quantities of required raw material as per drawing and giving requirement
of material.
To assist in preparation of work schedule on monthly/weekly / daily basis.
Issue of materials to sub constructors as per drawing and maintaining monthly
reconciliation of material.
Structural steel fabrication & Erection. Responsible for erection planning& achievements
of targets.
Ensure quality and safety at work site.
Increase rate of production and quality by proper planning and utilization of resources
and manpower.
Minimize scrap quantity by supplying Cutting plan for MS plates.
Check stock maintenance and status of available resources.
To maintain Daily Progress Report & Bill of material. Production & Manpower
management. In process Quality Control. Final inspection and maintaining client protocol.
3) 2.8 Years ( 25 Jan. 2008 to 12 Sep. 2010 ) work experience as Project Engineer
in L.R. Sharma and co., Delhi worked in the field of Trenchless piping ( Tunnel
Boring, Auger Boring, Pipe Jacking ,HDD etc. ) of water and sewer line.
Clients: DMRC, L & T, ITD, Senbo, SOMA, GAIL, Delhi Jal Board, UP Jal Nigam etc.
Job Profile :
Dealing with client for technical approval, handover and billing.
To execute the Project with proper planning and maintain the sites effectively in all
conditions and maintain quality and productivity of work in Trenchless Piping by TBM,
AGM, PJ, HDD Methods.
To conduct GPR (Ground Penetrating Radar ) Survey for all sites.
Ensure quality and safety at work site.
4) 3.2 years ( 8 Aug. 2004 to 19 oct. 2007 ) work experience as Fabrication engg. in
" Shastri consultants Pvt. Ltd. (SCPL), Indore (M.P.) ". Also known as " Desigcon
(Design construction) Pvt. Ltd. ", as well as " Echo infratech ", a group of growthoriented companies in the field of " Pre-engineered buildings" or Steel structured
building fabrication.
Clients: Bridgestone India Ltd., Advanced Enzyme, Indian Oil Corporation, Ganga
warehouse, Bajaj Ltd., Ruchi soya industries Ltd., Kriti industries india Ltd.,
Kirloskar Brothers Ltd. Etc.
Job Profile :
Check Fit-up and welding of built-up of MS Columns, beams, Rafter, Gantry Girder,
Bracings, Sag angle, Sag rod etc. as per requirement of drawing and Client.
To increase the rate of production and quality control of built-up Fabrication process
Issue of materials to sub constructors as per drawing and maintaining monthly
reconciliation of material.
Minimize scrap quantity by supplying Cutting plan for MS plates.
Purchasing of production related material.
Stock maintenance.
Scrap material maintenance.
Extracurricular
activities
Hobbies
Interacting with people, Reading, Net surfing, Dance and Listening Music,
Numismatists.
Personal
information
Name of father
Name of mother
Date of birth
Sex
Nationality
Languages known
Permanent Address
Willing to Relocate
Current CTC
Expected CTC
Passport Status
I hereby declare that the above information is true to the best of my knowledge.
Date :
Place :