Professional Documents
Culture Documents
WO - NA02 - E1 - 1 UMTS Cell Selection and Reselection-54
WO - NA02 - E1 - 1 UMTS Cell Selection and Reselection-54
WO - NA02 - E1 - 1 UMTS Cell Selection and Reselection-54
Reselection
ZTE University
Content
Node B
UE
Roaming
Content
To B
Select and monitor the indicated PICH and PCH of the cell
according to information sent in system information.
Monitor relevant system information.
Perform necessary measurements for the cell reselection
evaluation procedure.
Execute the cell reselection evaluation process.
Where, Sx is Squal.
Treselections
Serving Cell
Serving Cell
Qmeas,s + Qhyst2s
Qqualmin +
SIntraSearch
Qmeas,n - Qoffset2s,n
Qqualmin
Neighboring Cell
Neighboring
cell criterion S
is fulfilled and is
ranked
UE perform
intra-frequency
measurements
Neighboring Cell
Time
Treselections
UMTS
Serving Cell
GSM Serving
Cell
Qmeas,s + Qhyst1s
Qqualmin +
SSearchRat
Qmean,n Qoffset1s,n
QRxLevMin
GSM
Neighboring Cell
Inter-RAT cell
criterion S is
fulfilled and is
ranked
UE perform
inter-RAT
measurements
UMTS
Neighboring Cell
Time
Yes
QualMeas
Description
1CPICH Ec/No
2CPICH RSCP
Default Value
1CPICH Ec/No
Configuration
Path
QQualMin
Description
Default Value
-18dB
Configuration
Path
QRxLevMin
Description
Default Value
-115dBm
Configuration
Path
MaxRACHTxPwr
Description
-5033dBm
Default Value
24dBm
Configuration
Path
SIntraSearchPre
Description
Default Value
1: Configured to UE.
Configuration
Path
Sintrasearch
Description
Default Value
14dB
Configuration Path
SInterSearchPre
Description
Default Value
1: Configured to UE.
Configuration
Path
Sintersearch
Description
Default Value
10dB
Configuration Path
OtherRATInfoPre
Description
Default Value
1: Configured to UE.
Configuration
Path
Ssearch,RAT
Description
Default Value
6dB
Configuration Path
Qhyst1s
Description
Default Value
10dB
Configuration
Path
Qhyst2s
Description
Default Value
2dB
Configuration
Path
Qoffset1s,n
Description
This parameter indicates the quality offset of the serving cell and
neighbor cell when the quality measure is CPICH RSCP. This
parameter is required when queues cells in the cell reselection rule.
This parameter is broadcast to UE in SIB11. R of neighbor cell =
measured signal quality of neighbor cell - this offset. If value of the
parameter is increased, its harder to trigger cell reselection as the R
value of the neighbor cell will decrease. If value of the parameter is
decreased, its easier to trigger cell reselection as the R value of
neighbor cell will probably increase.
OMCR-5050dB
RNCD=P+500100
Default Value
0dB
Configuration Path
Qoffset2s,n
Description
This parameter indicates the quality offset of the serving cell and
neighbor cell when the quality measure is CPICH Ec/No. This
parameter is required when queues cells in the cell reselection rule.
This parameter is broadcast to UE in SIB11. R of neighbor cell =
measured signal quality of neighbor cell - this offset. If value of the
parameter is increased, its harder to trigger cell reselection as the R
value of the neighbor cell will decrease. If value of the parameter is
decreased, its easier to trigger cell reselection as the R value of
neighbor cell will increase.
OMCR-5050dB
RNCD=P+500100
Default Value
0dB
Configuration Path
Treselections
Description
031s step 1s
Default Value
1s
Configuration
Path
CellBarredInd
Description
1: Barred
2: Not Barred
Default Value
2: Not Barred
Configuration
Path
InFreqReselInd
Description
0: Allowed
1: Not Allowed
Default Value
0: Allowed
Configuration
Path
Sib11orSib11bis
Description
0: SIB11
1: SIB11bis
Default Value
0: SIB11
Configuration
Path
MeasPrio
Description
02
Default Value
Configuration
Path
Content
LA and RA Structure
NAS Connection
IMSI Attach/Detach
Content
UTRAN
URA UPDATE
UE
UTRAN
URA UPDATE
Content
UTRAN
CELL UPDATE
UE
UTRAN
CELL UPDATE
UE
UTRAN
CELL UPDATE
RADIO BEARER
RECONFIGURATION COMPLETE