Professional Documents
Culture Documents
Design Hybrid Concrete Buildings Extract
Design Hybrid Concrete Buildings Extract
Design Hybrid Concrete Buildings Extract
624.072.33:624.012.3/.4
CCIP-030
CI/Sfb
Design of Hybrid
Concrete Buildings
A guide to the design of buildings combining in-situ
and precast concrete
CCIP-030
Published January 2009
ISBN 978-1-904482-55-0
Price Group P
R. Whittle MA (Cantab) CEng MICE H. Taylor FREng, BSc, PhD, CEng, FICE, FIStructE
Hybrid cov-.indd 1
29/01/2009 16:43:37
Type 1
Precast twin wall and lattice girder slab with
in-situ concrete
Type 2
Precast column and edge beam with in-situ
oor slab
Type 4
In-situ columns or walls and beams with precast
oor units
Type 5
In-situ column and structural topping with precast
beams and oor units
Type 3
Precast column and oor units with cast in-situ
beams
Acknowledgements
The authors would particularly like to thank the following people for their support in the development of this
design guide:
Tony Jones
Ian Feltham
Arup
Arup
The contributions and comments from the Concrete Society Design Group and also from the following
people are gratefully acknowledged:
John Stehle
Graham Hardwick
Peter Kelly
Alex Davie
David Appleton
Kevin Laney
Norman Brown
Type 6
In-situ columns with lattice girder slabs with
optional spherical void formers
Laing ORourke
John Doyle Construction Ltd
Bison Concrete Products Ltd
Consultant
Hanson Concrete Products
Strongforce Engineering Plc
British Precast Concrete Federation Ltd
Hybrid cov-.indd 2
29/01/2009 16:43:54
Contents
1.
Introduction
1.1 Single point of responsibility
1.2 Design considerations
1.3 Best practice procurement guidance
2.
7
7
9
10
12
15
15
18
18
19
22
25
26
29
29
29
33
3.
5
5
6
6
13
14
29/01/2009 16:47:32
4.
34
34
35
36
36
37
37
38
42
5.
43
43
52
55
58
68
74
82
6.
Construction issues
6.1 Method of construction
6.2 Composite action between precast units and in-situ structural topping
6.3 Specially shaped standard units
6.4 Long and short units adjacent to each other
6.5 Differences of camber in double tees
6.6 Method of de-tensioning double tee units
6.7 Checking strand or wire pull-in for hollowcore units
6.8 Placing hollowcore units into the correct position
6.9 Production tolerances
87
87
89
89
89
91
91
91
91
92
7.
References
93
93
100
104
29/01/2009 16:47:44
20
23
30
31
41
56
65
80
84
29/01/2009 16:47:44
29/01/2009 16:47:45