Professional Documents
Culture Documents
NI 9944/9945 Quarter Bridge Completion Accessory: User Guide
NI 9944/9945 Quarter Bridge Completion Accessory: User Guide
NI 9944/9945 Quarter Bridge Completion Accessory: User Guide
N
T
INA
ST IONA
RU L
ME
NT
Plastic tie strap for strain relief wrapped around the two front holes,
as shown in Figure 3
M4x20 screw, or other hardware that fits in the 8.89 mm (0.350 in.)
outer clearance hole and 4.57 mm (0.180 in.) inner clearance hole,
as shown in Figure 3
NI 9944/9945 Dimensions
The NI 9944/9945 has outer dimensions of 66 21.6 22.96 mm
(2.6 0.85 0.90 in.), as shown in Figures 2 and 3.
0 EX+
1 IN+
3 Shield
21.6 mm
(0.85 in.)
2 QTR
66 mm (2.6 in.)
Holes for
Tie Strap
22.86 mm
(0.90 in.)
Specifications
The following specifications are typical for the range 40 to 70 C, unless
otherwise noted.
Weight ....................................................32 g (1.1 oz)
Operating temperature ............................40 to 70 C
Resistor value
NI 9944............................................120
NI 9945............................................350
Resistance drift
NI 9944............................................0.012 /C
NI 9945............................................0.035 /C
Resistor tolerance (at 25 C)...................0.1% max
Resistor power ........................................0.25 W max
ni.com
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation.
Refer to the Terms of Use section on ni.com/legal for more information about National
Instruments trademarks. Other product and company names mentioned herein are trademarks or trade
names of their respective companies. For patents covering National Instruments products, refer to the
appropriate location: HelpPatents in your software, the patents.txt file on your CD, or
ni.com/patents.
2006 National Instruments Corporation. All rights reserved.
374437A-01
Sep06