Professional Documents
Culture Documents
LTE
LTE
https://www.youtube.com/watch?v=wAss5nmnY5g
LTE RF conditions classification
cqi
http://www.slideshare.net/faraz_husain/rscp-rssi-ecno-cqi
http://www.kagoon.com/3g-drive-test-learning-pptx/main#
Event A5 : Serving becomes worse than threshold1 and neighbor becomes better than threshold2
Ms
Hys
>
Ms + Hys < Thresh (Leaving condition)
Thresh
(Entering
condition)
(Entering
condition)
Thresh
condition)
(Entering
condition)
Ocn is the cell specific offset of the neighbor cell. If not configured zero offset shall be
applied (included in MeasObjectEUTRA of the serving frequency as parameter
cellIndividualOffset for intra-f measurements and included in MeasObjectEUTRA
corresponding to the inter frequency as parameter cellIndividualOffset for
interfrequency measurements).
Ofs (dB) is the frequency specific offset of the serving frequency (i.e. offsetFreq within
the MeasObjectEUTRA corresponding to the serving frequency)
Ocs (dB) is the cell specific offset of the serving cell (included in MeasObjectEUTRA of
the serving frequency as parameter cellIndividualOffset)
Off (dB) is the offset parameter for this event (i.e. a3-Offset as defined within the
VarMeasurementConfiguration for this event)
Thresh1 is the threshold parameter for this event (i.e. a5-Threshold1 as defined within
the VarMeasurementConfiguration for this event)
Thresh2 is the threshold parameter for this event (i.e. a5-Threshold2 as defined within
the VarMeasurementConfiguration for this event)