Professional Documents
Culture Documents
132kV Relay Cal Tender 17 June 2014
132kV Relay Cal Tender 17 June 2014
132kV Relay Cal Tender 17 June 2014
JOB TITLE:
132kV Protection Relay Calibration in Compliance to ABE 1990
4.11 All relays parameter settings / configuration settings must be delivered in soft
copy DIGSI file format (if applicable) and PDF file format along with calibration
certificates.
4.12 Calibration sticker with due date two (2) years from the execution date to be
applied immediately on the device upon calibration. (Old stickers to be removed &
adhesives cleaned properly)
4.13 Official calibration report to be delivered to PCSB representative within two
(2) weeks from the date of calibration works.
Contractor must follow all PCSB rules, regulations and take all safety
precautions during working at site.
6.2. Contractor to attend safety briefing arranged by PCSB before carry out the
works.
6.3 Only trained / competent personnel shall attend and execute the works.
6.4. Contractor must be in proper attire and bring along own safety helmet and
safety shoes that are in good condition.
6.5. PCSB does not bind itself to accept the cheapest or any offer submitted.
6.6. Contractor must clean and tidy up the area after job completion or PCSB will
charge accordingly for the clean up work.
6.7. Job completion is subject to satisfaction of PCSB representative.
6.8. Any additional parts or accessories repair or replacement to be agreed &
certified by PCSB representative prior to rectification or replacement.
6.9. The Contractor will be responsible to make good, replace any damages
done to PCSB equipment or properties during the job at contractors own
cost.
6.10. Successful tendered party must provide Socso or workman compensation
Appendix 1 :
NOS
PANEL
CIRCUIT
=E01+R
TGLN 132kV
OHL No. 1
TNB CB TAG:
805
RELAY
Numerical Distance Protection
Siemens 7SA5111-4CA722AG3/GG
O/C Protection
Siemens
7SJ60014EA000DA0/BB
B/F Protection
Siemens 7SV6001-4EA001DA0/BB
Differential Protection
Siemens 7UT5121-4CB010AA0/JH
O/C Protection
Siemens
132/6.6kV
TRANSFORMER 7SJ60014EA000DA0/BB
=E02+R
1 TNB CB TAG:
B/F Protection
110
Siemens 7SV5001-4CA00
Restricted E/F Protection.
Siemens 7VH8000-4CA04/B
7
132kV
BUSCOUPLER
PROTECTION
TNB CB TAG:
120
10
=E03+R
132kV BUSBAR
PROTECTION
TNB CB TAG:
120
11
12
=E05+R
13
14
KTNN 132kV
OHL No. 2
TNB CB TAG:
905
O/C Protection
Siemens
7SJ60014EA000DA0/BB
B/F Protection
Siemens 7SV5001-4CA00
Differential Protection CHECK ZONE
Siemens 7VH8300-4CA04/A
Differential Protection - ZONE
A
Siemens 7VH8300-4CA04/A
Differential Protection - ZONE
B
Siemens 7VH8300-4CA04/A
Numerical Distance Protection
Siemens 7SA5111-4CA722AG3/GG
O/C Protection
Siemens
7SJ60014EA000DA0/BB
RLY
DueDate
15
B/F Protection
Siemens 7SV5001-4CA00
16
Differential Protection
Siemens 7UT5121-4CB010AA0/JH
17
18
19
O/C Protection
Siemens
132/6.6kV
TRANSFORMER 7SJ60014EA000DA0/BB
=E04+R
2 TNB CB TAG: B/F Protection
210
Siemens 7SV6001-4EA001DA0/BB
Restricted E/F Protection.
Siemens 7VH8000-4CA04/B