Professional Documents
Culture Documents
Determination of Saponification Value of A Fat or Oil
Determination of Saponification Value of A Fat or Oil
Experiment
Title: Determination of saponification value of a fat or oil.
Theory
Saponificatiin is the process by which the fatty acids in the glycerides of oil are hydrolysed by an
alkali. Each mole of triglyceride uses three moles of KOH for saponification as per the following
equation:
CH2
O
O
CH
CH2
COR
COR
COR
Triglyceride
CH2
3KOH
CH
CH2
OH
OH
3RCOOK
OH
Glycerol
Potassium salt of
fatty acid (Soap)
Saponification value is the amount (mg) of the alkali required to saponify 1 g of an oil or fat.
This value is useful for comparative study of the fatty acid chain length in oils.
A known quantity of the oil is refluxed with a known excess of alcoholic KOH. After
Saponification, the remaining KOH is estimated by titrating it against a standard acid.
Materials
1.
Alcoholic KOH: Dissolve KOH (40 g) in distilled alcohol (1 litre), keeping the
o
temperature below 15 C while the alkali is being dissolved (1N).
2.
0.5N HCl, accurately standardized.
3.
Phenolphthalein indicator: 1% in 95% ethanol
4.
Air condensers
Procedure
1. Weigh completely dry liquid sample (4.5 g) into a flask.
2. Add alcoholic KOH (50 ml) slowly from the burette into the flask.
3. Simultaneously, process another flask in the same way without adding the sample, connect
air condensers to the flask and boil the contents gently on steam bath for about an hour.
4. Allow the contents to cool at the room temperature and rinse the inside of the condensers
with a little distilled water and then remove the condensers.
5. Titrate the solutions against 0.5N HCl using phenolphthalein as indicator.
6. The end point is the just appearance of pink colour (pink to just colorless).
7. From the difference between the titration values of the blank flask and the flask containing
the oil, the amount of KOH in mg (saponification value) that has been used for 1g of the oil,
can be calculated.
Calculatons
Saponification value =