Professional Documents
Culture Documents
Reguladores de Presión
Reguladores de Presión
aerospace
climate control
electromechanical
filtration
fluid & gas handling
hydraulics
pneumatics
process control
sealing & shielding
Catalog 0700P-E
DISTRIBUTION NETWORK
At Parker, we have the largest global distribution
network in motion and control, with over 7,500
distributors serving more than 422,000 customers.
! WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN
OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide
product and/or system options for further investigation by users h aving technical expertise. It is important that you analyze all
aspects of your application including consequences of any failure, and review the information concerning the product or system
in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the
user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and
assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing,
are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its
authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this
document entitled Offer of Sale.
Copyright 2010-2005 Parker Hannifin Corporation. All Rights Reserved
Catalog 0700P-E
Precision Regulators
www.parker.com/pneu/precreg
Proportional Regulators
LV / EZ Lockout Valves
(Lockout Valves)
www.parker.com/pneu/lockout
G
H
Integrated Fittings
www.parker.com/pneu/ball
Quick Couplings
Quick
Couplings
www.parker.com/pneu/accessories
Hose and
Fittings
Accessories
Global Air
Preparation
Systems
www.parker.com/pneu/ssfrls
Filters,
Regulators,
Lubricators
Stainless
Steel
FRLs
Precision
Regulators
www.parker.com/pneu/frl
Proportional
Regulators
LV / EZ
Lockout
Valves
Integrated
Fittings
www.parker.com/globalfrl
Accessories
Ball Valves /
Plug Valves
Introduction
Introduction
Index
P
1
Tubing and
Fittings
Model to
Page Number
Index
(Revised 5-9-2013)
Filters, Regulators,
Lubricators
Mini, Prep-Air II, General Line
Section C
Accessories
Combos
Lubricators
Filter /
Regulators
Regulators
Coalescers
Filters
Product
Selection
www.parker.com/pneu/frl
Product Selection.................................................C3-C5
Bulk Liquid Separators.........................................C6-C9
Air Line Filters..................................................C11-C31
Air Line Coalescing Filters...............................C32-C50
Air Line Regulators...........................................C52-C95
Filter / Regulator Piggybacks.......................C96-C111
Air Line Lubricators, Micro-Mist....................C112-C119
Air Line Lubricators, Mist..............................C121-C138
Combinations & Accessories
14A / 14G..................................................C140-C141
C1
Catalog 0700P-E
Cautions
C
Product
Selection
Filters
Coalescers
Regulators
Filter /
Regulators
Lubricators
Combos
Accessories
! CAUTION:
Polycarbonate bowls and sight domes, being transparent and tough, are ideal for use with Filters and Lubricators. They are suitable for use
in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow, nor
temperatures outside of the rated range. As with most plastics, some chemicals can cause damage. Polycarbonate bowls and sight domes
should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols. They should not be used in air systems where
compressors are lubricated with fire-resistant fluids such as phosphate ester and di-ester types.
Metal bowls are recommended where ambient and/or media conditions are not compatible with polycarbonate bowls. Metal bowls resist
the action of most such solvents, but should not be used where strong acids or bases are present or in salt laden atmospheres. Consult
the factory for specific recommendations where these conditions exist.
TO CLEAN POLYCARBONATE COMPONENTS USE MILD SOAP AND WATER ONLY! DO NOT use cleansing agents such as acetone,
benzene, carbon tetrachloride, gasoline, toluene, etc., which are damaging to this plastic.
Metal bowl guards are recommended for all applications.
! CAUTION:
REGULATOR PRESSURE ADJUSTMENT The working range of knob adjustment is designed to permit outlet pressures within their full
range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic
of most industrial regulators, and limiting devices may be obtained only by special design.
C2
Catalog 0700P-E
Selection Chart
14F
P3NF
F602
X
X
43F
Water Separator
C9
Std.
C13
1 oz.
Std.
Opt.
Opt.
C14
2 oz.
Opt.
Std.
Opt.
C16
4.4 oz.
Opt.
Std.
Opt.
C18
7.2 oz.
Opt.
Std.
Opt.
C20
18 oz.
Opt.
Std.
Opt.
C22
32 oz.
Opt.
Std.
C24
27.5 oz.
Std.
C30
50.72 oz.
Std.
C30
11F
P3NF
F701
X
X
P3TF
C3
Adsorber
Aluminum Body
Nylon Housing
40
C6
15F
43F
20
Water Separator
Page
5
Aluminum Body
06F
02F
Metal
SG
X
X
35F
Poly Metal
X
X
12F
Aluminum Body
05F
10F
07F
F
I
L
T
E
R
S
35F
C
O
A
L
E
S
C
I
N
G
2-1/2
Grade 6, Grade 10
C35
1 oz.
C36
2 oz.
C38
4.4 oz.
C40
7.2 oz.
C42
18 oz.
C44
32 oz.
100 oz.
C46
27.5 oz.
C48
50.72 oz.
C48
C50
C
Product
Selection
1-1/4 1-1/2
Combos
Filters
3/4
Coalescers
1/2
P3TF
02F
F
I
L
T
E
R
S
3/8
Regulators
P3TF
1/4
Elements (Micron)
Capacity
Filter /
Regulators
W
A
T
E
R
1/8
Bowls
Lubricators
S
E
P
E
R
A
T
O
R
S
Port Size
Accessories
Basic
Series
Unit
Prep-Air II
Air Preparation Units
Catalog 0700P-E
Selection Chart
Series
Page
1/8
1/4
Product
Selection
Filters
15
25
30
40
60
14R
Opt.
Opt.
Opt.
Std.
C54
P3A-R
Std.
Std.
Std.
Std.
C56
R34
Opt.
Opt.
Std.
C58
R24 /
R25
Std.
Std.
Std.
C60
Std.
Std.
Std.
C62
Std.
Std.
Std.
Std.
C64
R45 /
R46
Coalescers
Regulators
Filter /
Regulators
Lubricators
R
E
G
U
L
A
T
O
R
S
S
T
A
N
D
A
R
D
Spring Range
20R
3/8
1/2
3/4
1-1/4 1-1/2
2-1/2
15R
Opt.
Opt.
Opt.
Std.
C66
05R
Opt.
Std.
Std.
Opt.
C68
06R
Std.
Std.
Opt.
C70
Std.
Std.
Opt.
C72
Opt.
Std.
Opt.
C74
Std.
Opt.
C76
Std.
C80
C82
C84
C86
C88
C90
07R
P3NR
R119
Combos
09R
Accessories
P
I
L
O
T
10R
11R
12R
P3NR
R119
C4
Prep-Air II
Air Preparation Units
Catalog 0700P-E
Selection Chart
2 oz.
Opt. Std.
Opt.
4.4 oz.
Opt. Std.
7.2 oz.
05E
06E
X
X
15L
16L
17L
02L
04L
X
X
06L
07L
P3NL
X
X
X
X
X
X
X
09L
C100
C102
Opt.
Opt. Std.
Opt.
18 oz.
Opt. Std.
Opt.
7.2 oz.
6
10
Opt.
Std.
2 oz.
C114
2.6 oz.
C116
4.9 oz.
C118
Opt.
.25 oz.
C123
1 oz.
C124
2.9 oz.
C126
6 oz.
C128
18 oz.
C130
C132
C136
16 oz.
32 oz.
64 oz.
1 Qt. Std.
3 Qt. Opt.
14G
1 oz.
Two-Unit
Opt.
14A
1 oz.
Three-Unit
Opt.
15G
2 oz.
Two-Unit
15A
2 oz.
Three-Unit
06G/16G
2 oz.
Two-Unit
06A/16A
2 oz.
Three-Unit
07G/17G
2 oz.
Two-Unit
07A/17A
2 oz.
Three-Unit
P3N3A
18 oz.
Two-Unit
P3N3B
18 oz.
Three-Unit
C628
M
O
D
U
L
A
R
C98
Aluminum Body
X
X
32 & 16
Three-Unit
15H
2 oz.
Two-Unit
15B
2 oz.
Three-Unit
06H/16H
2 oz.
Two-Unit
06B/16B
2 oz.
Three-Unit
07H/17H
2 oz.
Two-Unit
07B/17B
C142
C148
C154
2 oz.
Three-Unit
P3NCA
18 oz.
Two-Unit
P3NCB
18 oz.
Three-Unit
C5
C140
C144
C150
C156
C
Product
Selection
Combos
Opt.
Filters
Std. Opt.
30
Coalescers
B34
1 oz.
25
Regulators
Page
15
L606
C
O
M
B
O
S
40
12E
N
I
P
P
L
E
D
20
P3NE
M
L I
U S
B T
R
I
C
A
T
O
R M
S I
S
T
Spring Range
Adsorber
14E
07E
M
I
C
R
O
1- 1Metal
2 Poly Metal
1/4 1/2
SG
Capacity
Filter /
Regulators
Elements
(Micron)
Bowls
Lubricators
F
I
L
T
E
R
/
R
E
G
U
L
A
T
O
R
S
Port Size
Accessories
Basic
Series
Unit
Catalog 0700P-E
Product
Selection
Filters
Coalescers
Applications
Bulk Liquid Removal at Any Point in a Compressed Air System
P3TFA98WEAN
Regulators
Filter /
Regulators
Pre-Filtration
Lubricators
Ordering Information
Combos
P3TF
Accessories
Engineering
Level
A Current
Engineering
Level
2WA
Thread Type
2 BSPT
9 NPT
3WB
4WC
6WD
8WE
BWG
CWH
EWK
Drain Type
A Auto Internal
Float*
* Models are supplied
with Auto Drain as
Standard.
C6
Catalog 0700P-E
Operation
Operation
Air Enters the Bulk Liquid Separator Inlet and Turns
Into the Separator Module.
The Inlet of the Separator Module Contains a Set of
Fixed Vanes Which the Air Must Pass Through.
The Vanes Force the Air to Spin Inside the Vessel.
Vanes
Impinger
C
Product
Selection
Filters
Flow
Regulators
Filter /
Regulators
50.00
40.00
30.00
20.00
10.00
0.00
Specifications
25
50
75
100
% of Rated Flow
Pipe
Size
SCFM
(L/s)
P3TFA92WAAN
1/4"
21
(10)
0.9
(0.4)
P3TFA93WBAN
3/8"
85
2.2
(1.0)
P3TFA94WCAN
1/2"
P3TFA96WDAN
3/4"
233
(110)
P3TFA98WEAN
233
(110)
P3TFA9BWGAN
1-1/2"
742
(350)
5.3
(11.6)
P3TFA9CWHAN
2"
742
(350)
5.3
(11.6)
P3TFA9EWKAN
3"
1695
12.0
(26.4)
Operating Pressure
psig (bar)
Operating
Temperature
Weight
Lb.
(kg)
Model
Number
(40)
85
2.2
(1.0)
(40)
232 (16)
(800)
Maximum
176F (80C)
4.8
(2.2)
Minimum
35F (1.5C)
2.6
(5.7)
Stated flows are for operation at 102 psig (7 bar) with reference to 20C, 1 bar (a),
0% relative water vapor pressure.
C7
Lubricators
90.00
80.00
70.00
60.00
Combos
Separation Efficiency %
100.00
Accessories
Coalescers
Catalog 0700P-E
CL Pipe
H
C
C
Product
Selection
Filters
F
(BSPP)
Dimensions
Coalescers
Regulators
Filter /
Regulators
Lubricators
Combos
Model
Number
Wall Mounting
Bracket Kit
Pipe
Size
BSPP
F
P3TFA92WAAN
P3TKA00MWA
1/4"
3.00
(76)
1.12
(28.5)
6.02
(153)
1.58
(40)
7.15
(181.5)
1/2
2.05
(50)
1.18
(30)
0.71
(18)
0.96
(24.5)
P3TFA93WBAN
P3TKA00MWB
3/8"
3.83
(97.5)
1.34
(34)
7.91
(201)
1.97
(50)
9.25
(235)
1/2
2.36
(60)
1.57
(40)
0.81
(20.5)
1.00
(25.5)
P3TFA94WCAN
P3TKA00MWB
1/2"
3.83
(97.5)
1.34
(34)
7.91
(201)
1.97
(50)
9.25
(235)
1/2
2.36
(60)
1.57
(40)
0.81
(20.5)
1.00
(25.5)
P3TFA96WDAN
P3TKA00MWD
3/4"
5.07
(129)
1.67
13.09
(42.5) (232.5)
2.76
(70)
10.80
(275)
1/2
2.68
(68)
2.36
(60)
0.91
(23)
1.10
(28)
P3TFA98WEAN
P3TKA00MWD
5.07
(129)
1.67
(42.5)
12.68
(322)
2.76
(70)
14.35
(364.5)
1/2
2.68
(68)
2.36
(60)
0.91
(23)
1.10
(28)
P3TFA9BWGAN
P3TKA00MWF
1-1/2"
6.70
(170)
1.97
(50)
18.68
(474.5)
3.94
(100)
20.64
(524.5)
1/2
3.62
(92)
3.31
(84)
1.26
(32)
1.54
(39)
P3TFA9CWHAN
P3TKA00MWF
2"
6.70
(170)
1.97
(50)
18.68
(474.5)
3.94
(100)
20.64
(524.5)
1/2
3.62
(92)
3.31
(84)
1.26
(32)
1.54
(39)
P3TFA9EWKAN
P3TKA00MWJ
3"
8.07
(205)
2.36
(60)
30.39
(772)
4.72
(120)
32.76
(832)
1/2
5.31
(135)
3.94
(100)
1.40
(35.5)
1.67
(42.5)
Accessories
Inches (mm)
Materials of Construction
Automatic Float Drain............................................................ Plastic
Housing / Bowl................................................................... Aluminum
Seals...............................................................................Fluorocarbon
C8
Catalog 0700P-E
24
(610)
18
(457)
14.50
(368)
54.75
(1391)
48.23
(1235)
40.38
(1026)
37.25
(946)
P3TFAFGW3AN
Coalescers
P3TFAFFW2AN
Product
Selection
Filters
Port
Size
Flow
SCFM
Element
Type
Number Of
Elements
Part Number
4"
Flange
2119
0.01
micron
P3TFAFFW2AN
6"
Flange
3814
1.0
micron
P3TFAFGW3AN
P3TF Series
Operating Pressure:
Operating Temperature:
Regulators
Operating Information
Filter /
Regulators
P3TF Series
11.25
(286)
Service Kits
Materials of Construction
P3TF Series
DPG-Kit
HDF-120-NPT-A
Lubricators
Description
Combos
Accessories
Drain Kit
(Shipped loose)
4.25
(108)
PSI
15
29
44
58
73
87
100
116
131
145
160
174
189
203
218
232
247
261
275
bar
10
11
12
13
14
15
16
17
18
19
20
2.65
1.87
1.53
1.32
1.18
1.08
1.00
0.94
0.88
0.84
0.80
0.76
0.73
0.71
0.68
0.66
0.64
0.62
0.61
0.59
Factor
C9
290
Catalog 0700P-E
Notes
Prep-Air II
Air Preparation Units
C
Product
Selection
Filters
Coalescers
Regulators
Filter /
Regulators
Lubricators
Combos
Accessories
C10
Prep-Air II
Air Preparation Units
Filters
Automatic
Drain
.3
.2
.1
0
7
6
5
4
Product
Selection
.4
3
2
Flow Characteristics
05F22A*
3/8 Inch Ports
1
0
20
40
10
20
60
80
Flow - SCFM
30
40
3
100
50
120
140
60
Filters
.5
Regulators
Filter /
Regulators
Lubricators
Coalescers
Flow - dm /s
Accessories
Filter Selection
1. Determine maximum system flow
requirements.
.6
10
Twist
Drain
Combos
Catalog 0700P-E
C11
Prep-Air II
Air Preparation Units
Catalog 0700P-E
Product
Selection
Filters
Coalescers
B
D
E
F
G
Regulators
Filter /
Regulators
Lubricators
Combos
Accessories
Accepts
1/8 I.D. Tubing
Accepts
3/16 I.D. Tubing
(Overnight Drain)
(Spitter Drain)
C12
1/8" NPT
02F Series
1/4" Basic 1/8" Body
Catalog 0700P-E
Specifications
Flow Capacity*.........................................17 SCFM (8 dm3 /s)
Operating Temperature..............32 to 150F (0 to 65.5C)
Maximum Supply Pressure.....................200 psig (13.8 bar)
Standard Filtration................................................... 5 Micron
* Inlet pressure 90 psig (6.2 bar). Pressure drop 5 PSID (0.3 bar).
Body........................................................................Aluminum
Baffle.......................................................................Aluminum
Filter Element......................................Sintered Polyethylene
Seals...............................................................................Nitrile
Lubricators
5 Micron........................................................................ PS436
Coalescers
Materials of Construction
Regulators
Filter /
Regulators
Application
Filters
Product
Selection
C
.50
(13)
02F1BA
PSID
bar
B
1.00
(25)
Inlet Pressure
PSIG
bar
Inches (mm)
0.3
0.2
30
2.1
60 90 120 150
4.1 6.2 8.2 10.3
4
3
2
0.1
1
Ordering Information
Port Size
1/4"
0
0
5 Micron
02F1BA
C13
5
2
10
4
15
20
6
8
AIR FLOW RATE
SCFM
25
10
12 dm3/s
Accessories
02F1BA
PRESSURE DROP
Part Number
Combos
Catalog 0700P-E
Features
Automatic
Drain
Accepts
1/8" Tubing
Filters
Coalescers
Port
Size
Distance Required
Regardless Of
Drain Option
NPT
Twist Drain
14F Filter
Dimensions
Regulators
Poly Bowl
1/8"
14F01B*
14F05B*
1/4"
14F11B*
14F15B*
Filter /
Regulators
14F03B*
14F07B*
1/4"
14F13B*
14F17B*
Lubricators
SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
pressure drop.
A
1.69
(43)
B
1.53
(39)
C
.39
(10)
D
3.82
(97)
D
3.87
(99)
E
4.21
(107)
E
4.26
(108)
F
1.60
(41)
Inches (mm)
With
Combos
Ordering Information
Accessories
Port Size
0 1/8 Inch
1 1/4 Inch
Bowl Options
Polycarbonate Bowl
1 Twist Drain
5 Automatic Pulse Drain
Metal Bowl
3 Twist Drain
7 Automatic Pulse Drain
Elements
A 40 Micron
B 5 Micron
Z Adsorber
Engineering
Level
* Will be Entered
at Factory
Port Type
Blank NPT
1 BSPP
2 BSPT
C14
14F Series
Air Line Filters
Catalog 0700P-E
.6
.1
0
6
5
4
3
2
10
15
20
25
Flow - SCFM
10
30
35
.3
.2
.1
Flow Characteristics
14F01B*
1/8 Inch Ports
.4
40
6
5
4
3
2
Flow Characteristics
14F11B*
1/4 Inch Ports
1
0
15
Flow - dm /s
Product
Selection
.2
.5
.3
.4
8
.5
10
15
20
25
Flow - SCFM
10
Flow - dm /s
30
35
40
15
Filters
.6
Metal Bowl
Automatic Pulse Drain.................................................. PS451BP
Twist Drain....................................................................PS447BP
Filter Element Kits
40 Micron............................................................................ PS401P
5 Micron.............................................................................. PS403P
5 Micron Cartridge Kit......................................................... PS407P
Adsorber.............................................................................. PS452P
Bowls........................................................Transparent Polycarbonate
Metal (Zinc) Bowl w/o Sight Gauge
Deflector, Element Holder & Baffle.........................................Plastic
Drains
Twist Drain
Body & Stem......................................................................Plastic
Seals................................................................................... Nitrile
Automatic Pulse Drain
Piston & Seals..................................................................... Nitrile
Stem, Seat, Adaptor & Washers.................................. Aluminum
Filter Elements
5 Micron (Standard)...............................................................Plastic
40 Micron (Optional)..............................................................Plastic
Adsorber (Optional)...........................................Activated Charcoal
Seals........................................................................................... Nitrile
Specifications
Port Threads.................................................................. 1/8, 1/4 Inch
Pressure & Temperature Ratings
Polycarbonate Bowl............................. 0 to 150 psig (0 to 10.3 bar)
32F to 125F (0C to 52C)
Metal Bowl............................................ 0 to 250 psig (0 to 17.2 bar)
32F to 175F (0C to 80C)
Automatic Pulse Drain.....................10 to 250 psig (0.7 to 17.2 bar)
at 125F (52C) or less
Weight.......................................................................0.41 lb. (0.18 kg)
C15
Lubricators
Body...............................................................................................Zinc
Combos
Materials of Construction
Bowl Kits
Poly Bowl
Automatic Pulse Drain..................................................PS408BP
Twist Drain...................................................................... PS404P
Accessories
Filter /
Regulators
Regulators
Coalescers
Catalog 0700P-E
Automatic
Drain
Product
Selection
Automatic
Pulse Drain
Filters
Distance Required
Accepts
1/8" Tubing
Coalescers
Port
Size
Regardless Of
Drain Option
NPT
Twist Drain
05F Filter
Dimensions
Regulators
05F12A*
05F1PA*
3/8"
05F22A*
05F2PA*
Filter /
Regulators
05F14A*
3/8"
05F24A*
A
2.00
(51)
B
2.06
(52)
C
.56
(14)
D
5.35
(136)
E
5.91
(150)
F
2.25
(57)
Inches (mm)
With
Lubricators
Twist or
Automatic Pulse Drain
Combos
Ordering Information
Accessories
05F
Port Size
1 1/4 Inch
2 3/8 Inch
Bowl Options
Metal Bowl
Polycarbonate Bowl
2 Metal Bowl Guard / 3 Twist Drain
Twist Drain
4 Sight Gauge /
P Metal Bowl Guard / Twist Drain
Auto Pulse Drain R Auto Pulse Drain
T Sight Gauge /
Auto Pulse Drain
Elements
A 40 Micron
B 5 Micron
Engineering
Level
* Will be
Entered
at Factory
Port Type
Blank NPT
Options
Blank No Options
1* BSPP
C16
Catalog 0700P-E
.2
.1
0
7
6
5
4
3
2
Flow Characteristics
05F12A*
1/4 Inch Ports
1
0
10
20
10
30
15
40
50
Flow - SCFM
20
25
60
70
30
.4
.3
.2
.1
80
35
.5
90
40
.3
.6
.4
.6
.5
10
7
6
5
4
Product
Selection
10
3
2
Flow Characteristics
05F22A*
3/8 Inch Ports
1
0
20
40
10
20
60
80
Flow - SCFM
30
40
3
100
50
120
140
60
Filters
Flow - dm /s
Flow - dm /s
Bowl Kits
Poly Bowl
Automatic Pulse Drain.................................................... PS995P
Twist Drain...................................................................... PS932P
Metal Bowl
Automatic Pulse Drain.................................................... PS997P
Twist Drain...................................................................... PS934P
Sight Gauge / Automatic Pulse Drain............................. PS996P
Sight Gauge / Twist Drain............................................... PS935P
Drain Kit
Automatic Pulse Drain.................................................... PS998P
Semi-Auto Drain...............................................................PS511P
Twist Drain...................................................................... PS512P
Push N Drain................................................................. PS513P
Materials of Construction
Body..............................................................................................Zinc
Collar.........................................................................................Plastic
C17
Lubricators
Combos
Specifications
Accessories
Filter /
Regulators
Regulators
Coalescers
Catalog 0700P-E
Automatic
Drain
Filters
Coalescers
Port
Size
NPT
Twist Drain
06F Filter
Dimensions
Regulators
1/4"
06F12A*
06F16A*
3/8"
06F22A*
06F26A*
1/2"
06F32A*
06F36A*
Filter /
Regulators
06F14A*
06F18A*
Lubricators
3/8"
06F24A*
06F28A*
1/2"
06F34A*
06F38A*
A
2.81
(71)
B
2.74
(70)
C
.53
(13)
D
5.69
(145)
D
5.74
(146)
E
6.22
(158)
E
6.27
(159)
F
2.25
(57)
Inches (mm)
Combos
With
Ordering Information
Accessories
06F
Port Size
1 1/4 Inch
2 3/8 Inch
3 1/2 Inch
Bowl Options
Polycarbonate Bowl
2 Metal Bowl Guard /
Twist Drain
6 Metal Bowl Guard /
Auto Float Drain
Metal Bowl
3 Twist Drain
4 Sight Gauge /
Twist Drain
7 Auto Float Drain
8 Sight Gauge /
Auto Float Drain
Elements
A 40 Micron
B 5 Micron
Engineering
Level
* Will be
Entered
at Factory
Options
Blank None
Port Type
Blank NPT
1* BSPP
C18
4
3
2
Flow Characteristics
06F12A*
1/4 Inch Ports
10
20
10
30
40
50
60
Flow - SCFM
15
20
25
70
30
.2
.1
5
4
3
2
Flow Characteristics
06F22A*
3/8 Inch Ports
1
0
80
35
10
20
10
30
15
40
50
60
Flow - SCFM
20
25
30
3
70
80
35
90
40
100
45
110
50
Flow - dm /s
Flow - dm /s
.2
.1
Filters
5
4
3
2
Flow Characteristics
06F32A*
1/2 Inch Ports
1
0
Coalescers
.3
10
20
10
30
15
40
20
50
60
70
80
90
Flow - SCFM
25
30
35
3
40
100
45
110
50
120
55
130
Regulators
.4
60
Flow - dm /s
n
Specifications
Bowl Capacity..................................................................4.4 Ounces
Sump Capacity............................................................... 1.75 Ounces
Port Threads...........................................................1/4, 3/8, 1/2 Inch
Materials of Construction
Body .............................................................................................Zinc
Bowls . ................................................ Transparent Polycarbonate or
Metal (Zinc) With or Without Sight Gauge
Bowl Guards.............................................................................. Steel
Collar ........................................................................................Plastic
Deflector, Shroud & Baffle.....................................................Plastic
Drains
Twist Drain Body & Nut......................................................Plastic
Push N Drain
Body.................................................................................... Nitrile
Stem.................................................................................... Brass
Automatic Float Drain Housing, Float.................................Plastic
Seals................................................................................... Nitrile
Springs, Push Rod............................................... Stainless Steel
Filter Elements
40 Micron (Standard) . ..........................................................Plastic
5 Micron (Optional) ...............................................................Plastic
Adsorber (Optional).......................................... Activated Charcoal
Seals........................................................................................... Nitrile
Sight Gauge...................................................................... Polyamide
C19
Filter /
Regulators
.3
Lubricators
.1
Combos
.2
.4
.3
.4
Accessories
Technical Information
Product
Selection
Catalog 0700P-E
Catalog 0700P-E
Features
Twist
Drain
Automatic
Drain
Product
Selection
Filters
Distance Required
Coalescers
Port
Size
NPT
Twist Drain
07F Filter
Dimensions
Regulators
1/2"
07F32A*
07F36A*
3/4"
07F42A*
07F46A*
Filter /
Regulators
1/2"
07F34A*
07F38A*
3/4"
07F44A*
07F48A*
Lubricators
A
3.24
(82)
B
3.25
(83)
C
.70
(18)
D
6.97
(177)
D
7.00
(178)
E
7.67
(195)
E
7.70
(196)
F
2.75
(70)
Inches (mm)
With
Combos
Ordering Information
Accessories
07F
Port Size
3 1/2 Inch
4 3/4 Inch
Bowl Options
Polycarbonate Bowl
2 Metal Bowl Guard /
Twist Drain
6 Metal Bowl Guard /
Auto Float Drain
Metal Bowl
3 Twist Drain
4 Sight Gauge /
Twist Drain
7 Auto Float Drain
8 Sight Gauge /
Auto Float Drain
Elements
A 40 Micron
B 5 Micron
Engineering
Level
* Will be
Entered
at Factory
Options
Blank None
Port Type
Blank NPT
1* BSPP
C20
Catalog 0700P-E
.1
5
4
3
2
Flow Characteristics
07F32A*
1/2 Inch Ports
1
0
20
10
40
20
60
30
80
100
120
140
Flow - SCFM
40
50
60
3
70
160
80
180 200
90
.3
.2
.1
6
5
4
3
2
Flow Characteristics
07F42A*
3/4 Inch Ports
1
0
220
100
Flow - dm /s
20
10
40
20
60
30
80
40
100
120
140
160
Flow - SCFM
50
60
70
Flow - dm3 /s
80
180 200
90
220
100
240
110
260
Product
Selection
.2
.4
.3
.4
120
Specifications
Bowl Capacity.................................................................. 7.2 Ounces
Sump Capacity.................................................................2.8 Ounces
Port Threads.................................................................. 1/2, 3/4 Inch
Materials of Construction
Body..............................................................................................Zinc
Bowls.......................................................Transparent Polycarbonate
Metal (Zinc) With or Without Sight Gauge
Bowl Guards.............................................................................. Steel
Collar.......................................................................... Plastic or Metal
Deflector, Shroud & Baffle.....................................................Plastic
Drains
Twist Drain Body & Nut..................................................... Plastic
Push N Drain
Body................................................................................... Nitrile
Stem................................................................................... Brass
Automatic Float Drain
Housing, Float................................................................... Plastic
Seals.................................................................................. Nitrile
Springs, Push Rod.............................................. Stainless Steel
Filter Elements
40 Micron (Standard)............................................................ Plastic
5 Micron (Optional)............................................................... Plastic
Adsorber (Optional).......................................... Activated Charcoal
Seals.......................................................................................... Nitrile
Sight Gauge...................................................................... Polyamide
C21
Lubricators
Combos
Accessories
Filter /
Regulators
Regulators
Coalescers
Filters
P3NF Series
3/4", 1", 1-1/2" Basic 1" Body
Catalog 0700P-E
Twist
Drain
A (PB)
A
Features
Port blocks (PB) available to provide
1-1/2" port extension to 1" ported bodies.
Product
Selection
Filters
Coalescers
Regulators
Port
Size
Distance Required
F To Remove All
Bowls Regardless
of Drain Option
P3NF Filter
Dimensions
NPT
Twist Drain
P3NFA96GSM
P3NFA96GSA
Filter /
Regulators
1"
P3NFA98GSM
P3NFA98GSA
1-1/2"#
P3NFA9PGSM
P3NFA9PGSA
Lubricators
A
3.62
(92)
A (PB)
5.91
(150)
B
3.62
(92)
C
1.38
(35)
D
9.57
(243)
E
10.95
(278)
F
4.92
(125)
Inches (mm)
With
Twist Drain or
Automatic Float Drain
Combos
Ordering Information
Accessories
P3N f a
Design
Level
Port Type
Port Size
1* G Thread
(BSPP) Female
2 Rc Thread (BSPT)
Female
9 NPT Female
6 3/4" (w/o
Port Blocks)
8 1" (w/o
Port Blocks)
P 1-1/2" Port Blocks
(w/ 1" Ported Body)
8 g s m
Element
w/o DPI Indicator
A Adsorber
E 5 Micron
G 40 Micron
w/ DPI Indicator
B Adsorber
F 5 Micron
H 40 Micron
Bowl
Drain
S Metal Bowl w/
Sight Gauge
M Twist Drain
A Automatic Float
Drain
C22
P3NF Series
Air Line Filters
10
.1
0
.5
7
6
.4
.3
4
3
.2
Flow Characteristics
P3NF
3/4 Inch Ports
1
0
0
50
25
100
50
150
75
200
250
300
350
Flow - SCFM
100
125
3
150
175
400
.1
450
200
500
225
.2
.6
.3
.4
10
.6
.5
8
7
6
5
4
Flow Characteristics
P3NF
1 Inch Ports
1
0
0
100
50
200
100
Flow - dm /s
n
.1
0
600
250
Filters
Coalescers
8
7
6
5
Regulators
.2
200
500
.3
150
Flow - dm3 /s
400
10
.4
300
Flow - SCFM
.6
.5
4
3
2
Flow Characteristics
P3NF
1-1/2 Inch Ports
1
0
0
100
50
200
300
Flow - SCFM
100
150
3
400
200
500
Filter /
Regulators
Technical Information
Product
Selection
Catalog 0700P-E
600
250
Flow - dm /s
Specifications
Bowl Kits
Metal Bowl
Sight Gauge / Automatic Float Drain.................... P3NKA00BSA
Sight Gauge / Twist Drain.................................... P3NKA00BSM
Sight Gauge / Push N Drain................................P3NKA00BSP
Materials of Construction
Body.................................................................................... Aluminum
Deflector...................................................................................Plastic
Drain..........................................................................................Plastic
Filter Elements
40 Micron (Standard).............................................................Plastic
5 Micron (Optional)................................................................Plastic
Adsorber (Optional)...........................................Activated Charcoal
Seals.......................................................................................... Nitrile
Sight Gauge......................................................... Polyamide (Nylon)
C23
Accessories
Combos
Lubricators
F602 Series
3/4 & 1 Inch Ports
Catalog 0700P-E
F
IN
OUT
Manual
Drain
A
D
Product
Selection
Filters
Coalescers
Regulators
F602-06W, F602-08W
Filter Dimensions
NPT
Filter /
Regulators
Twist Drain
A
B
C
D
4.90 7.88 8.72 4.06
(124) (200) (221) (103)
F602-06WJ
F602-06WJR
1"
F602-08WJ
F602-08WJR
Lubricators
F602-06EJ
F602-06EJR
1"
F602-08EJ
F602-08EJR
F
2.45
(62)
F602-06E, F602-08E
Filter Dimensions
E
0.84
(21)
A
B
C
D
4.90 11.10 11.94 4.06
(124) (282) (303) (103)
Combos
E
0.84
(21)
F
2.45
(62)
inches (mm)
Accessories
Ordering Information
Port Threads
NPT
G BSPP
602
Port Size
06 3/4 Inch
08 1 Inch
Bowl
E
W
32 oz. Large
Capacity Metal
without Sight
Gauge
16 oz. Metal with
Sight Gauge
06
Element
G 5 Micron
J 40 Micron
/**
Engineering
Level
* Will be
Entered
at Factory.
C24
F602 Series
Air Line Filters
Catalog 0700P-E
1.7
Flow Characteristics
F602-06WJ
3/4-inch Port
100
150
200
250
300
50
100
20
40
60
80
3
100
120
140
Flow - dm /s
250
300
350
20
40
60
80
100
3
120
140
160
Coalescers
Float
(Inside Bowl)
Drain
(1/4" NPTF)
Regulators
Connection
Through
Bowl
(1/8" NPSM)
Manual
Push Button
Drain
(Outside Bowl)
Specifications
Bowl Capacity
Aluminum Bowl (E) 32 oz................................................ 32 Ounces
Zinc Bowl (W) 16 oz. ...................................................... 16 Ounces
Port Threads ....................................................................3/4, 1 Inch
( ) = Bowl Type
200
Flow - dm /s
150
Flow - SCFM
Flow - SCFM
Filters
50
Flow Characteristics
F602-08WJ
1-inch Port
With Internal Auto Drain (R) 20 to 175 psig (1.4 to 11.9 bar)
40F to 125F (4.4C to 52C)
Weight
Aluminum Bowl (E) 32 oz. ................................ 7 lb. (3.18 kg) / Unit
28 lb. (12.70 kg) / 4-Unit Master Pack
Zinc Bowl (W) 16 oz. ..................................... 6.3 lb. (2.86 kg) / Unit
25 lb. (11.34 kg) / 4-Unit Master Pack
Materials of Construction
Body.............................................................................................. Zinc
Bowls
(E) 32 oz.......................................... Aluminum without Sight Gauge
(W) 16 oz........................................................Zinc with Sight Gauge
Drain
Manual Twist & Overnight ........................................................Brass
Housing R ............................................................................Acetal
Housing Q........................................................................... Bronze
Filter Elements
40 Micron (Standard) . ............................................... Polypropylene
5 Micron (Optional) .................................................... Polypropylene
Seals............................................................................................Nitrile
Sight Gauge................................................................................Nylon
C25
Filter /
Regulators
Lubricators
.1
Combos
.2
Product
Selection
Accessories
.1
.3
.2
5
.3
F602 Series
1-1/4 & 1-1/2 Inch Ports
Catalog 0700P-E
Automatic
Drain
OUT
Product
Selection
D
E
Filters
Coalescers
Regulators
NPT
Twist Drain
F602-10W, F602-12W
Filter Dimensions
Filter /
Regulators
A
B
C
D
E
4.90 8.18 9.46 5.19 1.28
(124) (208) (240) (132) (32.4)
F602-10WJ
F602-10WJR
1-1/2"
F602-12WJ
F602-12WJR
Lubricators
F602-10E, F602-12E
Filter Dimensions
F602-10EJ
F602-10EJR
1-1/2"
F602-12EJ
F602-12EJR
F
2.45
(62)
A
B
C
D
E
4.90 11.41 12.69 5.19 1.28
(124) (290) (322) (132) (32.4)
Combos
F
2.45
(62)
inches (mm)
Accessories
Ordering Information
Port Threads
NPT
G BSPP
602
Port Size
10 1-1/4 Inch
12 1-1/2 Inch
Bowl
E
W
32 oz. Large
Capacity Metal
without Sight
Gauge
16 oz. Metal with
Sight Gauge
10
Element
G 5 Micron
J 40 Micron
/**
Engineering
Level
* Will be
Entered
at Factory.
C26
F602 Series
Air Line Filters
Catalog 0700P-E
1.7
5
1.7
10.3
25
150
Flow Characteristics
F602-10WJ
1-1/4-inch Port
0
0
50
100
150
200
250
300
350
400
450
500
Flow Characteristics
F602-12WJ
1-1/2-inch Port
0
50
100
150
200
Flow - SCFM
0
40
60
80
100
Flow
180
200
220
20
40
60
80
100
350
120
140
160
Flow - dmn3/s
400
180
200
450
220
500
240
550
260
600
280
Coalescers
20
300
Flow - SCFM
Float
(Inside Bowl)
Connection
Through
Bowl
(1/8" NPSM)
Drain
(1/4" NPTF)
Regulators
250
Manual
Push Button
Drain
(Outside Bowl)
Specifications
Bowl Capacity
Aluminum (E) 32 oz. ....................................................... 32 Ounces
Zinc (W) 16 oz................................................................. 16 Ounces
Port Threads . ............................................................1-1/4, 1-1/2 Inch
With Internal Auto Drain (R) 20 to 175 psig (1.4 to 11.9 bar)
40F to 125F (4.4C to 52C)
Weight
Aluminum Bowl (E) 32 oz. ............................. 7.7 lb. (3.49 kg) / Unit
31 lb. (14.06 kg) / 4-Unit Master Pack
Zinc Bowl (W) 16 oz. ........................................ 7 lb. (3.18 kg) / Unit
28 lb. (12.70 kg) / 4-Unit Master Pack
Materials of Construction
Body.............................................................................................. Zinc
Bowls
(E) 32 oz.......................................... Aluminum without Sight Gauge
(W) 16 oz........................................................Zinc with Sight Gauge
Drain
Manual Twist & Overnight ........................................................Brass
Housing R..............................................................................Acetal
Housing Q........................................................................... Bronze
Filter Elements
40 Micron (Standard) . ............................................... Polypropylene
5 Micron (Optional) .................................................... Polypropylene
Seals............................................................................................Nitrile
( ) = Bowl Type
Sight Gauge................................................................................Nylon
C27
Filter /
Regulators
Product
Selection
.1
Lubricators
Filters
.2
Combos
Accessories
.1
.3
.2
.3
F602 Series
2 & 2-1/2 Inch Ports
Catalog 0700P-E
Automatic
Drain
D
E
Product
Selection
Filters
C
B
Coalescers
Regulators
Port
Size
NPT
Twist Drain
F602-16W, F602-20W
Filter Dimensions
Filter /
Regulators
A
B
C
D
E
4.90 11.08 13.00 6.30 1.92
(124) (281) (330) (160) (48.7)
F602-16WJ
F602-16WJR
2-1/2"
F602-20WJ
F602-20WJR
Lubricators
F602-16E, F602-20E
Filter Dimensions
F602-16EJ
F602-16EJR
2-1/2"
F602-20EJ
F602-20EJR
F
2.45
(62)
A
B
C
D
4.90 14.31 16.23 6.30
(124) (364) (412) (160)
Combos
E
1.92
(48.7)
F
2.45
(62)
inches (mm)
Accessories
Ordering Information
Port Threads
NPT
G BSPP
602
Port Size
16 2 Inch
20 2-1/2 Inch
Bowl
E
W
32 oz. Large
Capacity Metal
without Sight
Gauge
16 oz. Metal with
Sight Gauge
16
Element
J 40 Micron
/**
Engineering
Level
* Will be
Entered
at Factory.
C28
F602 Series
Air Line Filters
Catalog 0700P-E
.1
Flow Characteristics
F602-16/20
2-inch Port
Product
Selection
.2
.3
250
500
750
1000
1250
120
240
360
Filters
Flow - SCFM
480
Float
(Inside Bowl)
Bowl Kits
Aluminum (E) 32 oz. ............................................................BK603B
Zinc with Sight Gauge (W) 16 oz. .................................... BK605WB
Drain Kits
External Auto (E) 32 oz........................................................ SA603D
External Auto (W) 16 oz. .................................................... SA602D
Internal Auto (All) . ........................................................... SA602MD
Manual (All) ................................................................... SA600Y7-1
Semi-Automatic Overnight Drain......................................SA602A7
(Drains automatically under zero pressure)
Filter Element Kits
40 Micron (All) .................................................................... EK602G
Repair Kits
Deflector, Baffle Assembly, and Retaining Rod (All) . ......... RK602C
External Auto Drain (All) ..................................................... RK602D
Internal Auto Drain (All) ................................................... RK602MD
Metal Bowl with Sight Gauge (W) 16 oz. .......................RKB605WB
Specifications
Bowl Capacity
Aluminum (E) 32 oz. ....................................................... 32 Ounces
Zinc (W) 16 oz.................................................................. 16 Ounces
Port Threads . ..................................................................2, 2-1/2 Inch
With Internal Auto Drain (R) 20 to 175 psig (1.4 to 11.9 bar)
40F to 125F (4.4C to 52C)
Weight
Aluminum Bowl (E) 32 oz. ........................... 10.3 lb. (4.67 kg) / Unit
11 lb. (4.99 kg) / 1-Unit Master Pack
Zinc Bowl (W) 16 oz. ..................................... 9.8 lb. (4.45 kg) / Unit
39 lb. (17.69 kg) / 4-Unit Master Pack
Materials of Construction
Body.....................................................................................Aluminum
Bowls
(E) 32 oz.......................................... Aluminum without Sight Gauge
(W) 16 oz........................................................Zinc with Sight Gauge
Drain
Manual Twist & Overnight ........................................................Brass
Housing R..............................................................................Acetal
Housing Q........................................................................... Bronze
Filter Elements
40 Micron (Standard) . ............................................... Polypropylene
Seals.........................................................................................Buna N
( ) = Bowl Type
Sight Gauge................................................................................Nylon
C29
Filter /
Regulators
Lubricators
Manual
Push Button
Drain
(Outside Bowl)
Combos
Drain
(1/4" NPTF)
Regulators
Connection
Through
Bowl
(1/8" NPSM)
Accessories
Coalescers
Flow - dmn3/s
Catalog 0700P-E
Auto Drain
B
F
Product
Selection
Filters
E
D
Coalescers
Regulators
Filter /
Regulators
35F
43F
Port
size
Element
type
1-1/2
5 micron
5 micron
5 micron
A
7.80
(198)
35F77BAP
35F87BAP
43FN7BAP
B
7.75
(197)
C
2.81
(71)
D
E
16.24 19.07
(412.5) (484)
Lubricators
F
3.88
(98.6)
G
.55
(14)
D
E
F
25.96 29.44 4.44
(659.4) (748) (112.8)
G
.55
(14)
C
3.48
(88)
inches (mm)
Combos
Ordering Information
Accessories
35F
Port Size
35F
7 1-1/2 Inch
8 2 Inch
43F
N 3 Inch
Bowl
7 Metal without
Sight Gauge,
Auto Float Drain
Element
B 5 Micron
Engineering
Level
A
Options
N
P*
G**
Without Differential
Pressure Indicator
With Differential
Pressure Indicator
With Differential
Pressure Gauge
Port Threads
Blank NPT
1 BSPP
2 BSPT
C30
Catalog 0700P-E
35F87BAP
90 100 120
6.2 7.0 8.2
150
10.3
0.3
0.2
15
1.0
60
4.1
35
2.4
2
0.1
0.1
0
0
0
200
400
100
200
600
800
1000
300
400
AIR FLOW RATE
1200
SCFM
3
dm /s
500
200
400
100
200
600
800
300
1000
400
500
1200
1400 SCFM
600
3
dm /s
Inlet Pressure
PSIG
bar
0.2
60
4.1
35
2.4
90 100 120
6.2 7.0 8.2
150
10.3
Regulators
0.3
15
1.0
Filter /
Regulators
0.1
1
0
0
0
500
200
1000
400
1500
600
2500
2000
800
1000
SCFM
3
1200 dm /s
Specifications
Maximum Supply
Pressure
Port Size
35F............................................................................... 1-1/2, 2 Inch.
43F......................................................................................... 3 Inch
Standard Filtration............................................................... 5 Micron
Weight
35F............................................................................19.3 lb. (8.7 kg
43F........................................................................ 32.8 lb. (14.9 kg)
* Without pressure indicator
Materials of Construction
Baffle................................................................................Plated Steel
Body.................................................................................... Aluminum
Bowls................................................................................... Aluminum
Deflector..........................................................................Plated Steel
Element Retainer............................................................Plated Steel
Filter Element................................................................ Polyethylene
Seals...............................................................................Fluorocarbon
Stud..................................................................................Plated Steel
C31
Lubricators
PRESSURE DROP
Coalescers
PSID
bar
43FN7BAP
Filters
Product
Selection
PSID
60
4.1
Combos
0.2
35
2.4
Inlet Pressure
PSIG
bar
Accessories
0.3
15
1.0
PRESSURE DROP
PRESSURE DROP
bar
PSID
bar
35F77BAP
Inlet Pressure
PSIG
bar
Prep-Air II
Air Preparation Units
Catalog 0700P-E
Coalescing Filters
300
150
125
100
75
Regulators
50
30
20
Filter /
Regulators
Filter Selection
1,500
1,000
700
500
350
250
150
100
70
50
40
30
25
20
15
10
5
3
1
32FN
32F9
31F8L
30F83
30F
P3N
11F
12F
15F
10F
Lubricators
Media Specifications
Combos
Accessories
G
r
a
d
e
Coalescing
Efficiency
0.3 to 0.6 Micron
Particles
Maximum Oil
Carryover1
PPM w/w
Micron
Rating
99.97%
0.008
10
95%
0.85
0.01
1.0
2-3
1.0
0.5
0.5
1Tested
Element Selection
Element
Grade
Applications
6
(.01
Micron)
10
(.7
Micron)
C32
500
300
200
150
125
100
75
50
30
20
32FN
32F9
31F8L
3,500
2,500
1,500
1,000
700
500
350
250
150
100
70
50
40
30
25
20
15
Coalescers
200
3,500
2,500
500
Filters
Product
Selection
10
30F83
30F
P3N
12F
11F
15F
10F
Prep-Air II
Air Preparation Units
Catalog 0700P-E
Coalescers
Regulators
Filter /
Regulators
Accessories
Lubricators
C
D
Combos
Filters
Product
Selection
Accepts
1/8 I.D. Tubing
Accepts
3/16 I.D. Tubing
(Overnight Drain)
(Spitter Drain)
C33
1/8" NPT
Prep-Air II
Air Preparation Units
Catalog 0700P-E
C
Product
Selection
Filters
Coalescing Filters
Coalescers
Regulators
Filter /
Regulators
Lubricators
Visble
Fume
Dust
Mist
Spray
Combos
Silt
Smog
Accessories
Solar Radiation
Fine Sand
Cloud and Fog
Rosin Smoke
Mist
Drizzle
Oil Aerosol
Tobacco Smoke
Metallurgical Dusts and Fumes
Ammonium Chloride
Cement Dust
Fume
Sulfuric
Beach Sand
Concentrator Mist
Pulverized Coal
Zinc Oxide Fume
Insecticide Dusts
Ground Talc
Plant
Colloidal
Spray Dried Milk
Spores
Silica
Alkali Fume
Pollens
0.01
0.1
C34
10
100
02F Series
1/4 I.D. Hose
Catalog 0700P-E
C B
Application
02FA10A
Grade 10
02FA22A
A
1.00
(25)
B
3.28
(83)
C
1.69
(43)
Inches (mm)
Coalescers
Grade 6
Filter /
Regulators
02FA06A
02F Coalescing
Filter Dimensions
Regulators
I.D.
Element
Operation
Lubricators
1/4"
Model
Accessories
Combos
Port Size
Filters
Product
Selection
Disposable.
Ordering Information
02F
Port Size
A Standard
06
Specifications
Elements
06
10
22
Grade 6
Grade 10
Grade 6
oil activated dye
Engineering
Level
A Current
Materials of Construction
Element............................................. Borosilicate & Felt Glass Fibers
Housing...................................................................................... Nylon
C35
10F Series
1/8", 1/4" Basic 1/8" Body
Catalog 0700P-E
Product
Selection
Grade 6 element,
99.97% DOP efficiency.
Filters
Coalescers
Distance Required
Grade 10 Element
1/8" 19 SCFM
1/4" 24 SCFM
Regulators
Port
Size
Accepts
1/8" Tubing
NPT
Twist Drain
10F Coalescing
Filter Dimensions
Poly Bowl
Filter /
Regulators
1/8"
10F01E*
10F05E*
1/4"
10F11E*
10F15E*
Lubricators
A
1.69
(43)
B
1.56
(39,6)
C
0.39
(10)
D
3.82
(97)
D
3.67
(93)
E
4.21
(107)
E
4.06
(103)
F
1.60
(41)
10F03E*
10F07E*
1/4"
10F13E*
10F17E*
Combos
Inches (mm)
With
SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
pressure drop.
Accessories
Ordering Information
10F
Port Size
0 1/8 Inch
1 1/4 Inch
Bowl Options
Polycarbonate Bowl
1 Twist Drain
5 Automatic Pulse Drain
Metal Bowl
3 Twist Drain
7 Automatic Pulse Drain
Elements
E Grade 6
H Grade 10
Engineering
Level
* Will be Entered
at Factory
Port Type
Blank NPT
1 BSPP
2 BSPT
C36
10F Series
Coalescing Filters (Oil Removal)
Catalog 0700P-E
Grade 6
2.4 bar
.3
4
3
.2
Flow Characteristics
10F01E*
1/8 Inch Ports
1
0
10
15
20
25
Flow - SCFM
10
30
35
40
15
20
Flow Characteristics
10F01E*
1/8 Inch Ports
0
10
15
.2
.1
0
.4
.3
.2
Flow Characteristics
10F01H*
1/8 Inch Ports
1
5
10
15
20
25
Flow - SCFM
10
40
45
15
20
30
35
15
40
.1
0
45
8
7
6
5
4
3
2
Flow Characteristics
10F11H*
1/4 Inch Ports
1
0
20
Coalescers
.5
35
.6
35 PSIG
10
2.4 bar
.3
Grade 10
.4
10
30
.5
25
Flow - dm /s
.6
20
Flow - SCFM
Flow - dm /s
10
45
Filters
.1
10
15
20
25
30
35
Flow - SCFM
10
15
40
45
50
20
Flow - dm /s
Flow - dm /s
Materials of Construction
Bowl Kits
Poly Bowl Automatic Pulse Drain................................ PS408BP
Twist Drain.....................................................PS404P
Metal Bowl Automatic Pulse Drain.................................PS451BP
Twist Drain .................................................PS447BP
Filter Element Kits Grade 6 (Standard).............................PS446P
Grade 10 (Optional) ...........................................................PS456P
Mounting Bracket Kit ......................................................... PS417BP
Body............................................................................................. Zinc
Bowls...................................................... Transparent Polycarbonate
Metal (Zinc) Without Sight Gauge
Drains Twist Drain
Body & Stem.......................................................... Plastic
Seals........................................................................Nitrile
Automatic Pulse Drain
Piston & Seals..........................................................Nitrile
Stem, Seat, Adaptor & Washers....................... Aluminum
Element Holder....................................................................... Plastic
Filter Element
Borosilicate & felt glass fibers 99.97% DOP efficiency
Largest Aerosol Particle Passed (Grade 6)................. 0.01 Micron
Largest Solid Particle Passed (Grade 6)...................... 0.30 Micron
Seals..........................................................................................Nitrile
Specifications
Automatic Pulse Drain Tube Barb....................................... 1/8 Inch
Bowl Capacity ..................................................................... 1 Ounce
Operation
Normal Operating Pressure Drop ..........................................2 psig
Maximum Recommended Pressure Drop........................... 10 psig
(Element should be replaced)
Port Threads ................................................................. 1/8, 1/4 Inch
Pressure & Temperature Ratings
Polycarbonate Bowl............................. 0 to 150 psig (0 to 10.3 bar)
32F to 125F (0C to 52C)
Metal Bowl............................................ 0 to 250 psig (0 to 17.2 bar)
32F to 175F (0C to 80C)
Automatic Pulse Drain.....................10 to 250 psig (0.7 to 17.2 bar)
at 125F (52C) or less
Weight ..................................................................... 0.41 lb. (0.18 kg)
C37
Regulators
Product
Selection
.4
Filter /
Regulators
Lubricators
.1
.5
Combos
.2
.3
.6
.4
.5
10
.6
Accessories
10
2.4 bar
Catalog 0700P-E
C1
Electronic
DPI
G
C
Electronic DPI
E
D
Filters
Distance Required
Coalescers
Regardless Of
Drain Option
Port
Size
Automatic
Pulse Drain
NPT
Twist Drain
15F Coalescing
Filter Dimensions
Regulators
15F12E*
15F1PE*
3/8"
15F22E*
15F2PE*
Filter /
Regulators
Accepts
1/8" Tubing
15F14E*
3/8"
15F24E*
Lubricators
Combos
SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
pressure drop.
A
2.00
(51)
B
2.06
(52)
C
1.50
(38)
C1
1.86
(47)
D
5.35
(136)
E
6.85
(174)
F
1.77
(45)
G Dia.
4.50
(114)
Inches (mm)
With Twist Drain or
Automatic Float Drain
Ordering Information
Accessories
15F
Port Size
Bowl Options
1 1/4 Inch
2 3/8 Inch
Metal Bowl
Polycarbonate Bowl
2 Metal Bowl Guard / 3 Twist Drain
Twist Drain
4 Sight Gauge /
P Metal Bowl Guard / Twist Drain
Auto Pulse Drain R Auto Pulse Drain
T Sight Gauge /
Auto Pulse Drain
Elements
Engineering
Level
E Grade 6
*
Will
be
H Grade 10
Entered
at Factory
Port Type
Options
Blank NPT
Standard.
C38
.4
.3
.2
3
2
Flow Characteristics
15F12E*
1/4 Inch Ports
10
20
30
40
Flow - SCFM
15
10
20
50
60
25
.1
70
30
80
7
6
5
4
Flow Characteristics
15F22E*
3/8 Inch Ports
1
0
35
10
20
30
Grade 10
.1
0
.5
7
6
.4
.3
4
3
.2
Flow Characteristics
15F12H*
1/4 Inch Ports
1
0
10
20
10
30
15
40
50
Flow - SCFM
20
25
35
60
70
30
80
35
.1
0
90
40
Coalescers
.2
30
80
.6
.3
25
70
10
.4
60
2.4 bar
.5
20
50
Flow - dm /s
10
40
Flow - SCFM
15
10
Flow - dm /s
.6
7
6
5
4
3
2
Flow Characteristics
15F22H*
3/8 Inch Ports
1
0
Flow - dm /s
20
10
40
20
60
80
Flow - SCFM
30
40
3
100
50
120
140
60
Flow - dm /s
n
Specifications
Bowl Capacity..................................................................2.0 Ounces
Sump Capacity................................................................. 0.9 Ounce
Port Threads..................................................................1/4, 3/8 Inch
Materials of Construction
Body..............................................................................................Zinc
Bowls........................................................Transparent Polycarbonate
Metal (Zinc) Without Sight Gauge
Bowl Guards.............................................................................. Steel
Collar.........................................................................................Plastic
Drain..........................................................................................Plastic
Filter Element
Borosilicate & felt glass fibers 99.97% DOP efficiency
Largest Aerosol Particle Passed (Grade 6)..................0.01 Micron
Largest Solid Particle Passed (Grade 6).......................0.30 Micron
Seals.......................................................................................... Nitrile
Sight Gauge, DPI..................................................Polyamide (Nylon)
C39
Product
Selection
.1
Filters
.2
.5
.3
10.3 bar
150 PSIG
.6
.4
10
.5
35 PSIG
Regulators
10
.6
2.4 bar
Filter /
Regulators
Lubricators
Technical Information
Combos
Accessories
Catalog 0700P-E
Catalog 0700P-E
C1
Electronic
DPI
Electronic DPI
Filters
Coalescers
Port
Size
Grade 10 Element
1/4" 60 SCFM
3/8" 72 SCFM
1/2" 95 SCFM
Distance Required
11F Coalescing
Filter Dimensions
NPT
Twist Drain
Regulators
1/4"
11F12E*
11F16E*
3/8"
11F22E*
11F26E*
1/2"
11F32E*
11F36E*
1/4"
11F14E*
11F18E*
3/8"
11F24E*
11F28E*
1/2"
11F34E*
11F38E*
Lubricators
Combos
SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
pressure drop.
C
1.46
(37)
C1
1.81
(46)
D
5.69
(145)
D
5.74
(146)
E
7.15
(182)
E
7.20
(183)
F
2.25
(57)
Inches (mm)
B
2.74
(70)
G Dia.
4.50
(114)
A
2.81
(71)
Ordering Information
Accessories
11F
Port Size
1 1/4 Inch
2 3/8 Inch
3 1/2 Inch
Bowl Options
Polycarbonate Bowl
2 Metal Bowl Guard /
Twist Drain
6 Metal Bowl Guard /
Auto Float Drain
Metal Bowl
3 Twist Drain
4 Sight Gauge /
Twist Drain
7 Auto Float Drain
8 Sight Gauge /
Auto Float Drain
Elements
E Grade 6
H Grade 10
Engineering
Level
* Will be
Entered
at Factory
Options
Blank
N
Port Type
C40
4
3
.2
Flow Characteristics
11F11E*
1/4 Inch Ports
20
10
40
60
80
100
Flow - SCFM
20
30
40
.1
.3
.2
3
2
Flow Characteristics
11F21E*
3/8 Inch Ports
120
.4
50
20
40
10
60
Flow - SCFM
20
Flow - dm /s
.1
0
.5
7
6
.4
.3
4
3
.2
Flow Characteristics
11F11H*
1/4 Inch Ports
1
0
20
10
40
60
80
100
Flow - SCFM
20
30
Flow Characteristics
11F31E*
1/2 Inch Ports
0
20
40
10
60
40
.1
120
50
80
20
30
.5
7
6
.4
.3
.2
Flow Characteristics
11F21H*
3/8 Inch Ports
20
10
40
60
80
Flow - SCFM
20
30
40
Specifications
Bowl Capacity..................................................................4.4 Ounces
Sump Capacity...............................................................1.75 Ounces
Operation Normal Operating Pressure Drop........................2 psig
Maximum Recommended Pressure Drop..........10 psig
(Element should be replaced)
Minimum Recommended Flow
20% Nominal Rating of Element
Port Threads............................................................1/4, 3/8, 1/2 Inch
60
100
120
50
.1
140
60
70
8
7
6
5
4
3
2
Flow Characteristics
11F31H*
1/2 Inch Ports
1
0
20
10
40
20
60
80
100
120
Flow - SCFM
30
40
50
140
60
160
70
Flow - dm /s
50
160
Flow - dm /s
Flow - dm /s
40
140
10
.6
120
Flow - SCFM
100
Flow - dm /s
.2
.3
60
10
.6
.4
50
140
Grade 10
.5
40
120
10
30
100
Flow - dm /s
.6
80
.1
Coalescers
Product
Selection
.3
Filters
Regulators
.4
.5
10
.6
Filter /
Regulators
.1
.5
.2
.6
.3
10
.4
10
.6
.5
Grade 6
Lubricators
Technical Information
Combos
Materials of Construction
Body............................................................................................. Zinc
Bowls...................................................... Transparent Polycarbonate
Metal (Zinc) With or Without Sight Gauge
Bowl Guard................................................................................. Steel
Collar........................................................................................ Plastic
Drains Twist Drain Body & Nut......................................... Plastic
Push N Drain Body.................................................Nitrile
Stem.................................................Brass
Automatic Float Drain .....................Housing, Float Plastic
Seals................................................Nitrile
Springs, Push Rod............ Stainless Steel
Filter Element
Borosilicate & felt glass fibers 99.97% DOP efficiency
Largest Aerosol Particle Passed (Grade 6)............. 0.01 Micron
Largest Solid Particle Passed (Grade 6).................. 0.30 Micron
Seals..........................................................................................Nitrile
Sight Gauge...................................................................... Polyamide
C41
Accessories
Catalog 0700P-E
Catalog 0700P-E
Features
Removes liquid aerosols and sub-micron particles.
C1
Electronic
DPI
Electronic DPI
Filters
Coalescers
Port
Size
Distance Required
12F Coalescing
Filter Dimensions
NPT
Twist Drain
Regulators
1/2"
12F32E*
12F36E*
3/4"
12F42E*
12F46E*
Filter /
Regulators
1/2"
12F34E*
12F38E*
3/4"
12F44E*
12F48E*
Lubricators
SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
pressure drop.
A
3.24
(82)
B
3.25
(83)
C
1.63
(41)
C1
2.00
(51)
D
6.97
(177)
D
7.00
(178)
E
8.60
(218)
E
8.63
(219)
F
2.75
(70)
G Dia.
4.50
(114)
Inches (mm)
Combos
Ordering Information
Accessories
12F
Port Size
3 1/2 Inch
4 3/4 Inch
Bowl Options
Polycarbonate Bowl
2 Metal Bowl Guard /
Twist Drain
6 Metal Bowl Guard /
Auto Float Drain
Metal Bowl
3 Twist Drain
4 Sight Gauge /
Twist Drain
7 Auto Float Drain
8 Sight Gauge /
Auto Float Drain
Elements
E Grade 6
H Grade 10
Engineering
Level
* Will be
Entered
at Factory
Options
Blank
N
Port Type
C42
.4
.3
4
3
.2
Flow Characteristics
12F31E*
1/2 Inch Ports
50
20
100
150
200
Flow - SCFM
40
60
80
.1
7
6
5
4
Flow Characteristics
12F41E*
3/4 Inch Ports
100
Flow - dm /s
50
20
100
40
Grade 10
.2
.1
0
.5
.4
6
5
.3
.2
3
2
.1
Flow Characteristics
12F31H*
1/2 Inch Ports
1
0
50
20
100
150
200
Flow - SCFM
40
60
120
80
0
250
8
7
Coalescers
.3
100
300
.6
.4
80
3
250
10
.5
60
200
2.4 bar
.6
150
Flow - SCFM
Flow - dm /s
10
250
Product
Selection
.1
.5
6
5
4
3
2
Flow Characteristics
12F41H*
3/4 Inch Ports
1
0
100
Filters
.2
.3
.6
.4
.5
10
50
20
100
40
150
Flow - SCFM
60
80
3
200
250
100
300
120
Flow - dm /s
Flow - dm /s
Specifications
Bowl Capacity..................................................................7.2 Ounces
Sump Capacity................................................................ 2.8 Ounces
Operation Normal Operating Pressure Drop..........................2 psig
Maximum Recommended Pressure Drop..........10 psig
(Element should be replaced)
Minimum Recommended Flow
20% Nominal Rating of Element
Port Threads............................................................... 1/2 & 3/4 Inch
Materials of Construction
Body............................................................................................. Zinc
Bowls...................................................... Transparent Polycarbonate
Metal (Zinc) With or Without Sight Gauge
Bowl Guard................................................................................. Steel
Collar.......................................................................... Plastic or Metal
Drains Twist Drain Body & Nut.......................................... Plastic
Push N Drain Body.................................................Nitrile
Stem.................................................Brass
Automatic Float Drain .....................Housing, Float Plastic
Seals................................................Nitrile
Springs, Push Rod........... Stainless Steel
Filter Element
Borosilicate & felt glass fibers 99.97% DOP efficiency
Largest Aerosol Particle Passed (Grade 6)................. 0.01 Micron
Largest Solid Particle Passed (Grade 6)...................... 0.30 Micron
Seals..........................................................................................Nitrile
Sight Gauge...................................................................... Polyamide
C43
Regulators
10
.6
Filter /
Regulators
Lubricators
Technical Information
Combos
Accessories
Catalog 0700P-E
P3NF Series
3/4", 1", 1-1/2" Basic 1" Body
Catalog 0700P-E
A (PB)
A
Product
Selection
Filters
Coalescers
Regulators
Port
Size
Grade 10 Element
3/4" 195 SCFM
1" 215 SCFM
1-1/2" 225 SCFM
Distance Required
F To Remove All
Bowls Regardless
of Drain Option
P3NF Coalescing
Filter Dimensions
NPT
Twist Drain
P3NFA96DSM
P3NFA96DSA
Filter /
Regulators
1"
P3NFA98DSM
P3NFA98DSA
1-1/2"
P3NFA9PDSM
P3NFA9PDSA
A
3.62
(92)
A (PB)
5.91
(150)
B
3.62
(92)
C
2.30
(58.5)
D
9.57
(243)
E
11.90
(302)
Lubricators
F
4.92
(125)
Standard part numbers shown bold for Grade 6 Elements (for Grade
10 Elements, replace D with Q in the 8th position). For other
models refer to ordering information below.
1" Port Body with 1-1/2" Port Block.
SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
pressure drop.
Inches (mm)
With Twist Drain or
Automatic Float Drain
Combos
Ordering Information
Accessories
Design
Level
P3N f a
Port Type
Port Size
1* G Thread
(BSPP) Female
2 Rc Thread (BSPT)
Female
9 NPT Female
6 3/4" (w/o
Port Blocks)
8 1" (w/o
Port Blocks)
P 1-1/2" Port
Blocks (w/ 1"
Ported Body)
D s m
Element
w/ DPI Indicator
D Grade 6
Q Grade 10
Bowl
Drain
S Metal Bowl w/
Sight Gauge
M Twist Drain
A Automatic Float
Drain
C44
P3NF Series
Coalescing Filters (Oil Removal)
Catalog 0700P-E
.4
.3
.2
3
2
.1
Flow Characteristics
P3NF 3/4 Inch Ports
1
0
0
50
100
25
150
Flow - SCFM
50
75
200
250
100
300
.4
.3
4
3
.2
Flow Characteristics
P3NF 1 Inch Ports
1
0
0
50
125
.5
100
25
150
200
Flow - SCFM
50
75
250
100
6
5
4
3
2
.1
0
0
125
50
Flow - dm /s
Flow - dm /s
Flow Characteristics
P3NF 1-1/2 Inch Ports
300
100
25
Flow - SCFM
50
75
200
250
100
300
125
Flow - dm /s
Filters
150
Product
Selection
.1
.2
.3
.5
.6
10
.6
.4
10
10
.6
.5
Grade 6
.1
0
7
6
.4
.3
4
3
.2
.1
Flow Characteristics
P3NF 3/4 Inch Ports
1
0
0
50
25
100
50
150
200
Flow - SCFM
75
100
250
125
300
350
150
400
175
10
9
.6
.5
7
6
.4
.3
4
3
.2
.1
Flow Characteristics
P3NF 1 Inch Ports
1
0
0
50
25
100
150
200
Flow - SCFM
50
75
100
250
125
300
350
150
400
175
Regulators
.5
7
6
5
4
3
2
Flow Characteristics
P3NF 1-1/2 Inch Ports
1
0
0
50
25
Flow - dm /s
Flow - dm /s
50
150
200
Flow - SCFM
75
100
250
125
300
350
150
400
175
Flow - dm /s
Specifications
Bowl Kits
Metal Bowl
Sight Gauge / Automatic Float Drain..................P3NKA00BSA
Sight Gauge / Twist Drain.................................. P3NKA00BSM
Sight Gauge / Push N Drain..............................P3NKA00BSP
Bowl Latch Kit........................................................................C11A33
DPI Replacement Kit............................................................ PS781P
Drain Kit
Automatic Float Drain.......................................................... PS506P
Semi-Auto Drain.................................................................. PS511P
Twist Drain........................................................................... PS512P
Push N Drain...................................................................... PS513P
Filter Elements Grade 6 (Standard).................... P3NKA00ESCB
Grade 10 (Optional) ..................... P3NKA00ES9
Sight Gauge Kit ............................................................P3NKA00PE
Mounting Bracket Kit*................................................ P3NKA00MW
* If 1-1/2 BSPP E02 fittings are required, use P3NKA0BMW.
Materials of Construction
Body & Bowl....................................................................... Aluminum
Deflector.................................................................................. Plastic
Drain......................................................................................... Plastic
Seals..........................................................................................Nitrile
Sight Gauge......................................................... Polyamide (Nylon)
Weight 3/4"............................................................... 3.5 lb. (1.6 kg)
1".................................................................. 3.5 lb. (1.6 kg)
1-1/2" ........................................................ 4.6 lb. (2.1 kg)
1"
C45
Accessories
Combos
Lubricators
100
Filter /
Regulators
.2
.3
.6
.4
.5
10
10
.6
Coalescers
Grade 10
F701 Series
3/4" & 1" Basic 1" Body
Catalog 0700P-E
Product
Selection
Filters
Coalescers
Regulators
Grade 6
Filter /
Regulators
Port
Size
Flow
(SCFM)*
Grade 10
Part
Number
Flow
(SCFM)*
Part
Number
F701-06E7P
Lubricators
Port Size
Bowl
Capacity
32 oz.
4.95
(126)
11.77
(299)
13
(330)
4.00
(101)
1.23
(31)
100 oz.
4.95
(126)
21.39
(543)
22.63
(575)
4.00
(101)
1.23
(31)
3/4"
95
F701-06E3P
158
1"
95
F701-08E3P
158
F701-08E7P
170
F701-06L3P
285
F701-06L7P
1"
170
F701-08L3P
285
F701-08L7P
inches (mm)
Combos
* Dry media flow. For wet media info see table on next page.
Ordering Information
Accessories
Port Threads
NPT
G BSPP
701
06
Port Size
Bowl
Element
06 3/4 Inch
08 1 Inch
E Metal without
Sight Gauge
32 oz.
L Metal without
Sight Gauge
100 oz.
3 Grade 6
7 Grade 10
Element Service
Indicator
Blank
P
G
/**
Bowl Drains
Blank
None
Pop-up
T
Style
Differential
Pressure
Q*
Gauge
R
Engineering
Level
Manual Twist
* Will be
Drain
Entered
High Pressure
at Factory
Internal Auto
Drain
External Auto
Drain
* Q Option Not
Low Pressure
Internal Auto Drain Available with
Bowl Option L.
C46
F701 Series
Coalescing Filters (Oil Removal)
Catalog 0700P-E
F701-06E3*
F701-08E3*
100
F701-06L3*
F701-08L3*
G
r
a
d
e
D.O.P.
Coalescing Efficiency
0.3 to 0.6 Micron
Particles
Maximum Oil
Carryover1
PPM w/w
Media Dry
99.97%
0.008
1.0
2-3
10
95%
0.85
0.5
0.5
70
60
50
40
30
20
10
0
0
Flow - SCFM
1Tested
10
20
30
40
50
Flow - dmn3/s
60
70
80
Regulators
Coalescers
Product
Selection
Media Specifications
80
Filters
90
Weight
3/4 & 1 Inch (E) 32 oz.....................................................5 lb. (2.3 kg)
3/4 & 1 Inch (L) 100 oz...................................................8 lb. (3.6 kg)
Materials of Construction
Drain Kits
Internal Automatic Drain - High Pressure (T)................... SA702MD
Manual Twist Drain......................................................... SA600Y7-1
Filter Element Kits
Port Size / Grade 6
3/4, 1 Inch (E) 32 oz...................................................F701-C3-0773
3/4, 1 Inch (L) 100 oz..................................................F701-C3-0774
Port Size / Grade 10
3/4, 1 Inch (E) 32 oz...................................................F701-C7-0773
3/4, 1 Inch (L) 100 oz..................................................F701-C7-0774
Specifications
Operation
Maximum Recommended Pressure Drop..............................10 psig
(element should be replaced)
Normal Operating Pressure Drop (Dry)....................................2 psig
Normal Operating Pressure Drop (Wet)...................................5 psig
( ) = Bowl Type
C47
Lubricators
Bowl Kit
Port Size
3/4, 1 Inch (E) 32 oz.............................................................BK603B
3/4, 1 Inch (L) 100 oz........................................................... BK603C
Differential Pressure Pop Up Indicator Repair Kit . ........... RK701P
(only works with originally equipped units)
Combos
Accessories
Filter /
Regulators
Mounting Bracket
Port Size
3/4 (Pair of Pipe Mounted Brackets)............................. SA200AW57
1 (Pair of Pipe Mounted Brackets)................................ SA200CW57
Catalog 0700P-E
Auto Drain
B
F
A
C
C
Product
Selection
Filters
Coalescers
* Without
Regulators
Filter /
Regulators
35F
Lubricators
43F
Port
size
Element
type
1-1/2
0.01 micron
1-1/2
1.0 micron
1-1/2
Adsorber
0.01 micron
1.0 micron
Automatic drain
Combos
Adsorber
0.01 micron
1.0 micron
Adsorber
A
7.80
(198)
35F77EAP
35F77HAP
35F77ZAP
35F87EAP
35F87HAP
35F87ZAP
43FN7EAP
43FN7HAP
43FN7ZAP
B
7.76
(197)
C
2.83
(72)
D
E
16.24 19.07
(412.5) (484)
F
3.88
(98.6)
C
3.48
(88)
D
E
F
25.96 29.44 4.44
(659.4) (748) (112.8)
inches (mm)
Accessories
Ordering Information
35F
Port Size
35F
7 1-1/2 Inch
8 2 Inch
43F
N 3 Inch
Bowl
Element
7 Metal without
Sight Gauge,
Auto Float Drain
E .01 Micron
H 1 Micron
Z Adsorber
G
.55
(14)
Engineering
Level
A
Options
N
P*
G**
Port Threads
C48
G
.55
(14)
Catalog 0700P-E
120
8.2
150
10.3
PSID
90 100
6.2 7.0
60
4.1
5
0.3
0.2
35
2.4
60
4.1
90 100
6.2 7.0
120
8.2
150
10.3
2
0.1
0.1
200
400
600
800
1000
200
Flow - SCFM
0
100
200
300
400
100
400
600
Flow - SCFM
200
300
800
1000
400
Flow - dmn3/s
Flow - dmn /s
0.3
0.2
35
2.4
60
4.1
90 100 120
6.2 7.0 8.2
150
10.3
2000
2500
Regulators
Pressure Drop
Coalescers
PSID
bar
43FN7HAP
Inlet Pressure
PSIG
15
bar
1.0
Filter /
Regulators
0.1
0
0
500
200
1000
400
1500
Flow - SCFM
600
800
Flow - dmn3/s
1000
Lubricators
Filters
1200
Specifications
Maximum Supply
Pressure
Weight
Element
35F: 0.01 Micron...............................................MTP-95-502
35F: 1.0 Micron................................................ MSP-95-502
35F: Adsorber.................................................. MXP-95-502
43F: 0.01 Micron...............................................MTP-95-562
43F: 1.0 Micron.................................................MSP-95-876
43F: Adsorber.................................................. MXP-95-565
* Filtration temperature of 70F (21C) @100 PSIG (6.9 bar) with typical
compressor lubricating oil and protected by 0.01 micron filter.
Combos
Product
Selection
35F87EAP
Inlet Pressure
PSIG
15
bar
1.0
Materials of Construction
Body.................................................................................... Aluminum
Bowls................................................................................... Aluminum
Filter Element
Seals...............................................................................Fluorocarbon
Stud..................................................................................Plated Steel
C49
Accessories
0.2
35
2.4
Pressure Drop
Pressure Drop
0.3
bar
PSID
bar
35F77EAP
Inlet Pressure
PSIG
15
bar
1.0
P3TF Series
4" & 6" Flange
Catalog 0700P-E
23.75
(603)
21.13
(537)
Product
Selection
14.38
(365)
13
(330)
55.88
(1419)
42.25
(1073)
42.88
(1089)
Filters
P3TF Series
21" reqd for
element replacement
Coalescers
Flanged Filters
Operating Information
Regulators
Filter /
Regulators
Lubricators
Port
size
Flow
SCFM
Element
type
Number of
elements
Part number
4"
Flange
2755
0.01
micron
4"
Flange
2755
1.0
micron
6"
Flange
4132
6"
Flange
4132
P3TF Series
Operating Pressure:
P3TFAFFD2AN
Operating Temperature:
P3TFAFFQ2AN
Service Kits
0.01
micron
P3TFAFGD3AN
1.0
micron
P3TFAFGQ3AN
Number
Required
Description
P3TF Series
DPG-Kit
HDF-120-NPT-A
Combos
Materials of Construction
0.01 Micron
4 or 6
PSY1035002
1.0 Micron
4 or 6
PSY1035001
Accessories
Approx.
6.69
(170)
Drain Kit
(Shipped loose)
4.25
(108)
PSI
15
29
44
58
73
87
100
116
131
145
160
174
189
203
218
232
247
261
275
290
bar
10
11
12
13
14
15
16
17
18
19
20
1.07
1.13
1.19
1.25
1.31
1.36
1.41
1.46
1.51
1.56
1.60
1.65
1.70
Factor
C50
Prep-Air II
Air Preparation Units
Catalog 0700P-E
Notes
Accessories
Combos
Lubricators
Filter /
Regulators
Regulators
Coalescers
Filters
Product
Selection
C51
Regulators
Prep-Air II
Air Preparation Units
Regulators
Catalog 0700P-E
05R213A*
Product
Selection
Filters
Coalescers
Regulators
Filter /
Regulators
7
6
5
4
3
2
1
0
120
105
90
75
60
45
30
15
0
10
10
20
10
30
40
Flow (SCFM)
15
20
3
50
25
60
70
30
80
35
Flow - dm /s
n
Lubricators
Combos
WARNING
Accessories
CAUTION:
REGULATOR PRESSURE ADJUSTMENT The
working range of knob adjustment is designed to
permit outlet pressures within their full range. Pressure
adjustment beyond this range is also possible because
the knob is not a limiting device. This is a common
characteristic of most industrial regulators, and limiting
devices may be obtained only by special design.
For best performance, regulated pressure should
always be set by increasing the pressure up to the
desired setting.
C52
Prep-Air II
Air Preparation Units
Catalog 0700P-E
F
G
Operation
F
G
Lubricators
Accessories
Coalescers
Filters
Combos
C
Product
Selection
Regulators
Filter /
Regulators
14R Series
1/8", 1/4" Basic 1/8" Body
Catalog 0700P-E
Features
Unbalanced poppet standard.
A
B
1/8" NPT
Gauge Ports
(2)
Easily serviced.
Product
Selection
C
E
14R
A
F
14R**L*
INLET
Filters
Coalescers
14R013F*
1/4"
14R113F*
Regulators
With Gauge
1/8"
14R018F*
1/4"
14R118F*
14RM
Filter /
Regulators
Lubricators
B
1.56
(40)
C
2.50
(63.5)
D
0.38
(10)
E
2.88
(73)
14R**L*
A
1.65
(42)
B
1.56
(40)
C
2.28
(57.9)
D
0.38
(10)
E
2.68
(68)
A
1.50
(38)
B
1.50
(38)
C
2.36
(60)
D
0.50
(13)
E
2.98
(73)
F
1.188
(30)
G
0.594
(15)
H
0.325
(8)
J
0.725
(18)
---
14RM
SCFM = Standard cubic feet per minute at 100 psig inlet, 90 psig no
flow secondary setting and 10 psig pressure drop.
14R
0.094
Roll Pin
14R
A
1.65
(42)
Ordering Information
NPT
Without Gauge
1/8"
0.12
OUTLET
0.379 C'Bore
.048 / .056 Deep
2 Places
0.180 (4.6mm) Dia.
4 Holes
Port Size
Inches (mm)
13
Combos
Accessories
Port Size
0 1/8 Inch Pipe,
1/8 Inch
Gauge Port
1 1/4 Inch Pipe,
1/8 Inch
Gauge Port
B 1/4 Inch Pipe,
1/4 Inch
Gauge Port
C 1/8 Inch Pipe,
No Gauge Port
M Manifold Mounting
Pressure Range
Without Gauge
Yellow Knob Black Knob
10 30 psig
B0 30 psig
11 60 psig
B1 60 psig
12 15 psig
B2 15 psig
13 125 psig B3 125 psig
With Gauge*
15 30 psig
B5 30 psig
16 60 psig
B6 60 psig
17 15 psig
B7 15 psig
18 125 psig B8 125 psig
Relief
Port Type
F Relieving
G Non-Relieving
H Low Temp.
Relieving
J Low Temp.
Non-Relieving
Blank NPT
Engineering
Level
* Will be
Entered at
Factory
1 BSPP
2 BSPT
Options
Blank
L
P
S
T
No Options
Preset Non-
Adjustable
Preset
Adjustable
Pressure
Limiter Max.
Adjustable
Pressure
Limiter
Max. Non-
Adjustable
Inlet Pressure is
100 psig. For other
pressures, contact
factory.
Preset / Pressure
Limited
Blank
XXX*
XXX*
None
Preset
Pressure
Pressure
Limited
* Available Preset /
Pressure Limited
Range, 10 to 90 psig
in 5 psig increments.
For higher
pressures, contact
factory.
(Example:
065 = 65 psig)
C54
14R Series
Air Line Regulators
Catalog 0700P-E
0
0
5
2
10
4
15
20
25
10
12
30
14
35
16
3
2
1
0
40
18
60
40
20
0
0
Flow - dm /s
Product
Selection
20
80
5
2
10
4
15
20
25
10
12
30
14
35
16
40
18
Flow - dm /s
CAUTION:
WARNING
Filter /
Regulators
Filters
40
Coalescers
60
Regulators
80
14R113F*
100
14R013F*
100
Specifications
Materials of Construction
Adjusting Nut.............................................................................Brass
Adjusting Stem & Spring ......................................................... Steel
Body............................................................................................. Zinc
Bonnet, Seat, Piston & Valve Poppet................................... Plastic
Seals..........................................................................................Nitrile
C55
Accessories
Combos
Lubricators
P3A Series
1/8", 1/4" Basic 1/8" Body
Catalog 0700P-E
Product
Selection
1/8" NPT
Gauge Ports
(2)
Filters
Coalescers
Port Size
NPT
P3A-R Regulator
Dimensions
Without Gauge
Regulators
1/8"
P3A-RN91YNN
1/4"
P3A-RN92YNN
With Gauge
Filter /
Regulators
1/8"
P3A-RN91YGN
1/4"
P3A-RN92YGN
A
1.57
(40)
B
1.57
(40)
D
0.46
(12)
E
2.92
(74)
C
2.46
(63)
Inches (mm)
Lubricators
SCFM = Standard cubic feet per minute at 100 psig inlet, 90 psig no
flow secondary setting and 10 psig pressure drop.
Combos
Ordering Information
Accessories
P3A-RN
Port Type
9 NPT
Female
Port Size
1 1/8 Inch
2 1/4 Inch
Relief
Q Non-Relieving
Y Relieving
Pressure / Gauge
Without Gauge
A 15 psig (0 to 1 bar)
L 60 psig (0 to 4 bar)
N 120 psig (0 to 8 bar)
Y 30 psig (0 to 2 bar)
With Gauge
B 15 psig (0 to 1 bar)
G 120 psig (0 to 8 bar)
M 60 psig (0 to 4 bar)
Z 30 psig (0 to 2 bar)
C56
Options
Options
L* Preset Non-Adjustable
N No Options
P* Preset Adjustable
S* Pressure Limiter
Adjustable
T* Pressure Limiter
Non-Adjustable
N None
Preset / Pressure
Limited
Blank
XXX*
XXX*
None
Preset
Pressure
Pressure
Limited
* Available Preset /
Pressure Limited
Range, 10 to 90 psig
in 5 psig increments.
For higher pressures,
contact factory.
(Example:
065 = 65 psig)
P3A Series
Air Line Regulators
Catalog 0700P-E
P3A-RN92YNN
P3A-RN91YNN
0
2
5
2
10
15
20
25
Flow - SCFM
10
12
30
14
35
Product
Selection
20
0
2
16
5
2
10
15
20
25
Flow - SCFM
10
12
30
14
35
16
Flow - dm /S
Flow - dm /S
CAUTION:
WARNING
Filter /
Regulators
Specifications
Materials of Construction
Filters
20
40
Coalescers
60
C57
Lubricators
80
Regulators
40
Combos
60
Accessories
80
100
100
R34 Series
1/8", 1/4" Basic 1/8" Body
Catalog 0700P-E
A1
Dia.
Non-Relieving
Mounting
Screw
4 Places
C1
Product
Selection
Filters
Coalescers
Regulators
A
1.50
(38.1)
C1
2.70
(68.6)
G
0.60
(15.2)
1/8" - 17 SCFM*
Filter /
Regulators
Lubricators
Relieving
1/4" - 19 SCFM*
1/8"
Without
Gauge
0 to 30 psig
(0.0 to 2.1 bar)
R344-01A
Without
Gauge
0 to 60 psig
(0.0 to 4.1 bar)
R344-01B
Without
Gauge
0 to 125 psig
(0.0 to 8.6 bar)
R344-01C
1/4"
R344-02A
R344-02B
Manifold Mount
R342-0MA
R342-0MB
R344-02C
R342-0MC
B
OUTLET
H
J
Port Size
INLET
Model
Type
R342-0MC
3.07
.095 Roll Pin
for Alignment
4.57
(116.08mm) Dia.
4 Holes
9.63 CBore
1.42/1.22 Deep
2 Places
Available in 2 or 4 port
design.
R344-02C
E1
I
N
A1
1.54
(39.2)
D
0.50
(12.7)
H
0.32
(8.1)
B
1.20
(30.5)
E
3.25
(82.6)
J
0.73
(18.5)
B1
1.56
(39.6)
E1
3.25
(82.6)
C
2.75
(69.9)
F
1.20
(30.5)
With Gauge
With Gauge
With Gauge
0 to 30 psig
(0.0 to 2.1 bar)
R344-01AG
0 to 60 psig
(0.0 to 4.1 bar)
R344-01BG
0 to 125 psig
(0.0 to 8.6 bar)
R344-01CG
R344-02AG
R344-02BG
R344-02CG
Combos
Ordering Information
Accessories
R34
Number of
Ports
2 2 Ports
4* 4 Ports
Port
Thread
- NPT
G BSPP
01 1/8"
02 1/4"
0M Manifold Mount
02
Pressure
Range
A 0-30 PSI
B 0-60 PSI
C 0-125 PSI
Options
Blank
G
K
P
No Options
Gauge
Non-Relieving
Diaphragm
Panel Mount Nut
Options
Blank
L
M
No Options
Preset Non-
Adjustable
Preset
Adjustable
C58
Preset / Pressure
Limited
Blank
XXX*
XXX*
None
Preset
Pressure
Pressure
Limited
R34 Series
Air Line Regulators
Catalog 0700P-E
30
20
10
5
10
15
20
25
30
20
10
0
40
10
15
20
25
Flow - dm /s
10
Flow - dm /s
n
CAUTION:
Filters
50
WARNING
5
4
3
2
1
0
90
80
70
60
50
Filter /
Regulators
R344-02C
100
40
30
20
10
0
10
15
20
25
10
Flow - dm /s
n
Materials of Construction
Body.................................................................................... Aluminum
Bonnet....................................................................................... Acetal
Valve Assembly.........................................................................Brass
Springs........................................................................................ Steel
Panel Nut................................................................................... Acetal
Specifications
C59
Coalescers
60
Product
Selection
40
70
Regulators
50
80
Lubricators
60
Combos
70
90
Accessories
80
90
R344-01C
100
100
6
R342-0MC
Catalog 0700P-E
PU
+
SH
L O C
Product
Selection
Lightweight
Diaphragm Operated
1/8" NPT
Gauge Ports
(2)
C
E
Filters
Coalescers
NPT
Port Size
Regulators
Air Service
Relieving
Water Service
Non-Relieving
R25-01C
R24-01CK
1/4"
R25-02C
R24-02CK
Filter /
Regulators
A
1.60
(41)
B
1.60
(41)
D
0.49
(13)
E
3.10
(79)
Inches (mm)
Lubricators
Combos
Ordering Information
Accessories
R25
Series
R24
R25
EPDM Elastomers
(Water)
Buna Elastomers
(Air)
Port Size
01 1/8 Inch
02 1/4 Inch
02
Pressure Range
A 0 to 25 psig
(0 to 2 bar)
B 0 to 60 psig
(0 to 4 bar)
C 0 to 125 psig
(0 to 8 bar)
Relief
Blank
K
P
Relieving
Non-Relieving
(For Water Service)
Panel Mount Nut
C60
C
2.61
(66)
Catalog 0700P-E
75
50
25
0
0
0
5
2
Flow - SCFM
4
3
10
15
R25-02CK
100
75
50
25
0
1.5
2.5
3.5
Flow - GPM
0
0.5
2.0
4.0
6.0
8.0
10.0
12.0
Flow - l/min
Flow - dm /s
WARNING
Filter /
Regulators
Regulators
CAUTION:
Coalescers
Filters
C
Product
Selection
Reduced Pressure
(PSIG)
R25-02CK
Materials of Construction
Specifications
Gauge Ports (2) .................................................................... 1/8 Inch
(Can be used for full flow)
Pressure Rating Maximum Inlet Pressure 150 psig.........(10.0 bar)
Port Threads .................................................................. 1/8, 1/4 Inch
Temperature Rating ............................. 40F to 125F (4C to 52C)
C61
Accessories
Combos
Lubricators
Catalog 0700P-E
+
K
PU
SH
L O
Product
Selection
Lightweight
Diaphragm Operated
1/4" NPT
Gauge Ports
(2)
C
E
Filters
Coalescers
NPT
Air Service
Relieving
Port Size
Regulators
Water Service
Non-Relieving
R45-02C
R46-02CK
3/8"
R45-03C
R46-03CK
Filter /
Regulators
A
2.06
(52)
B
2.06
(52)
D
0.53
(14)
E
3.43
(87)
Inches (mm)
Lubricators
Combos
Ordering Information
Accessories
R45
Series
R45
R46
Buna Elastomers
(Air)
EPDM Elastomers
(Water)
Port Size
02 1/4 Inch
03 3/8 Inch
02
Pressure Range
A 0 to 25 psig
(0 to 2 bar)
B 0 to 60 psig
(0 to 4 bar)
C 0 to 125 psig
(0 to 8 bar)
Relief
Blank
K
P
Relieving
Non-Relieving
(For Water Service)
Panel Mount Nut
C62
C
2.90
(74)
Catalog 0700P-E
20
0
0
10
4
15
6
20
8
25
30
35
Flow - SCFM
10
12 14
40
16 18 20
3
45
50
22 24
55
60
26
28
200
100
0
60
40
20
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Product
Selection
300
Flow - GPM
0
Flow - dm /s
2.0
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
Flow - l/min
CAUTION:
WARNING
Filter /
Regulators
Filters
40
400
Coalescers
60
500
R46
100
Regulators
80
600
R45
100
Materials of Construction
Specifications
C63
Accessories
Combos
Lubricators
20R Series
1/8", 1/4" Basic 1/8" Body
Catalog 0700P-E
Product
Selection
1/8" NPT
Gauge Ports
(2)
Filters
Coalescers
Port Size
NPT
20R Regulator
Dimensions
Without Gauge
Regulators
1/8"
20R013G*
1/4"
20R113G*
Filter /
Regulators
A
1.56
(40)
B
1.56
(40)
D
0.50
(13)
E
3.06
(78)
Inches (mm)
Lubricators
Combos
Ordering Information
Accessories
20R
Port Size
0 1/8 Inch
1 1/4 Inch
Pressure Range
11 25 psig
13 125 psig
61 60 psig
13
Relief
F Relieving
G Non-Relieving
Engineering
Level
* Will be
Entered at
Factory
Port Type
Blank NPT
1 BSPP
C64
C
2.56
(65)
20R Series
Miniature Water Regulators
Catalog 0700P-E
Flow Characteristics
2
1
0
40
Product
Selection
60
20
0
0
0
0.5
.02
.04
1.0
1.5
2.0
2.5
.06
.08
.10
.12
.14
.16
3.0
.18
3.5
.20
Filters
.22
CAUTION:
WARNING
Filter /
Regulators
Coalescers
Regulators
100
Specifications
Bonnet Kit........................................................................PCKR364Y
Materials of Construction
Adjusting Nut & Stem............................................................... Steel
Body, Valve Poppet, Bottom Plug, Diaphragm Button........Brass
Bonnet, Knob.......................................................................... Plastic
Seals, Diaphragm.................................................................. Buna N
Springs....................................................................................... Steel
C65
Accessories
Combos
Lubricators
15R Series
1/4" & 3/8" - Basic 1/4" Body
Catalog 0700P-E
Easily serviced.
Product
Selection
1/4" NPT
Gauge Ports
(2)
C
E
Filters
Coalescers
Port Size
NPT
15R Regulator
Dimensions
Without Gauge
Regulators
1/4"
15R113F*
3/8"
15R213F*
With Gauge
Filter /
Regulators
1/4"
15R118F*
3/8"
15R218F*
Lubricators
Combos
Ordering Information
B
2.00
(51)
D
0.70
(18)
E
3.30
(84)
Inches (mm)
A
2.12
(54)
SCFM = Standard cubic feet per minute at 100 psig inlet, 90 psig no
flow secondary setting and 10 psig pressure drop.
Accessories
Port Size
1 1/4 Inch
2 3/8 Inch
15R
13
Relief
Pressure Range
Without Gauge
10 30 psig
11 60 psig
12 15 psig
13 125 psig
With Gauge
15 30 psig
16 60 psig
17 15 psig
18 125 psig
F Relieving
G Non-Relieving
H Low Temp.
Relieving
J Low Temp.
Non-Relieving
Engineering
Level
* Will be
Entered at
Factory
C66
C
2.60
(66)
15R Series
Air Line Regulators
Catalog 0700P-E
0
2
7
2
14
21
28
35
42
10
12
14
3
Flow - dm /s
16
18
20
49
22
24
3
2
1
0
56
26
60
40
20
0
2
7
2
14
21
28
35
42
10
12
14
3
Flow - dm /s
16
18
20
49
22
24
56
26
CAUTION:
Product
Selection
20
80
WARNING
Filter /
Regulators
Filters
40
Coalescers
60
Regulators
80
15R213F*
100
15R113F*
100
Specifications
Materials of Construction
Adjusting Nut............................................................................ Brass
Adjusting Stem & Spring ........................................................ Steel
Body.............................................................................................Zinc
Bonnet, Seat, Piston & Valve Poppet................................... Plastic
Seals......................................................................................... Nitrile
C67
Accessories
Combos
Lubricators
Catalog 0700P-E
SH
TO L O
Easily serviced.
1/4" NPT
Gauge Ports
(2)
Reverse Flow.
Product
Selection
High
Flow:
SCFM
1/4" 30
3/8" 40 SCFM
C
E
Filters
Coalescers
Port Size
NPT
05R Regulator
Dimensions
Without Gauge
1/4"
05R113A*
3/8"
05R213A*
Regulators
05R118A*
3/8"
05R218A*
A
2.00
(51)
B
2.06
(52)
D
1.28
(32)
E
4.44
(113)
C
3.16
(80)
Filter /
Regulators
Inches (mm)
Lubricators
Ordering Information
Combos
Accessories
Port Size
1 1/4 Inch
2 3/8 Inch
05R
Pressure Range
Without Gauge
11 60 psig
13 125 psig
14 200 psig
With Gauge**
16 60 psig
18 125 psig
19 200 psig
13
Blank NPT
* Will be
Entered at
Factory
1* BSPP
** Includes 1-1/2"
Dial Face Gauge
Port Type
Engineering
Level
Relief
A Relieving
L Non-Relieving
---
Options
Blank
L
P
S
T
No Options
Preset
Non-Adjustable
Preset
Adjustable
Pressure
Limiter Max.
Adjustable
Pressure
Limiter Max.
Non- Adjustable
Preset /
Pressure
Limited
Blank
XXX*
XXX*
None
Preset
Pressure
Pressure
Limited
* Available Preset /
Pressure Limited
Range, 10 to 90
psig in 5 psig
increments. For
higher pressures,
contact factory.
(Example:
065 = 65 psig)
C68
Catalog 0700P-E
05R113A*
1
0
45
30
15
0
10
10
20
10
30
40
Flow (SCFM)
15
20
3
50
25
60
70
30
5
4
3
2
1
0
80
35
90
75
60
45
30
15
0
10
10
20
10
Flow - dm /s
30
40
Flow (SCFM)
15
20
3
50
25
60
70
30
80
35
Flow - dm /s
CAUTION:
WARNING
Filter /
Regulators
Product
Selection
60
105
Filters
75
Coalescers
90
Regulators
105
120
05R213A*
120
Specifications
Materials of Construction
Adjusting Stem . .......................................................................Brass
Bonnet...................................................................................... Plastic
Body............................................................................................. Zinc
Collar, Knob............................................................................ Plastic
Diaphragm.................................................................................Nitrile
Poppet & Cap.......................................................................... Plastic
Seals..........................................................................................Nitrile
Springs Poppet & Control........................................................ Steel
C69
Accessories
Combos
Lubricators
Catalog 0700P-E
CK
H T LO
O
Easily serviced.
1/4" NPT
Gauge Ports
(2)
Product
Selection
C
E
Filters
Port Size
06R Regulator
Dimensions
NPT
Without Gauge
Coalescers
1/4"
06R113A*
3/8"
06R213A*
1/2"
06R313A*
Regulators
Filter /
Regulators
1/4"
06R118A*
3/8"
06R218A*
1/2"
06R318A*
A
2.81
(71)
B
2.74
(70)
D
1.39
(35)
E
6.08
(154)
C
4.69
(119)
Inches (mm)
WARNING
Lubricators
Ordering Information
Combos
Accessories
Port Size
1 1/4 Inch
2 3/8 Inch
3 1/2 Inch
06R
Pressure Range
Without Gauge
11 60 psig
13 125 psig
15 250 psig
With Gauge**
16 60 psig
18 125 psig
21 250 psig
13
Relief
Blank NPT
* Will be
Entered at
Factory
1* BSPP
---
Options
Blank
L
P
R
No Options
Preset
Non-Adjustable
Preset
Adjustable
Reverse Flow
** Includes 1-1/2"
Dial Face Gauge
Port Type
Engineering
Level
A Relieving
L Non-Relieving
Preset /
Pressure
Limited
Blank None
XXX* Preset
Pressure
* Available Preset /
Pressure Limited
Range, 10 to 90
psig in 5 psig
increments. For
higher pressures,
contact factory.
(Example:
065 = 65 psig)
C70
Catalog 0700P-E
1
0
40
20
10
20
30
40
15
20
50
60
25
5
4
3
2
1
0
70
30
Flow - dm /s
80
60
40
20
10
20
30
40
50
15
Flow - dm /s
20
60
25
70
Product
Selection
60
30
Filters
80
100
100
6
06R213A*
06R113A*
2
1
0
Regulators
40
20
10
20
10
30
40
50
20
Flow - dm /s
25
60
70
30
80
35
90
40
Specifications
Materials of Construction
Adjusting Stem . ........................................................................ Steel
Body............................................................................................. Zinc
Bonnet, Piston Stem, Valve Poppet & Cap ......................... Plastic
Collar, Knob............................................................................. Plastic
Diaphragm.................................................................................Nitrile
Seals..........................................................................................Nitrile
Springs Poppet................................................................ Stainless
Control....................................................................... Steel
C71
Filter /
Regulators
60
Lubricators
80
Combos
Accessories
CAUTION:
Coalescers
06R313A*
100
Catalog 0700P-E
CK
H T LO
O
Easily serviced.
1/4" NPT
Gauge Ports
(2)
Product
Selection
C
E
Filters
Port Size
07R Regulator
Dimensions
NPT
Without Gauge
Coalescers
1/2"
07R313A*
3/4"
07R413A*
Regulators
1/2"
07R318A*
3/4"
07R418A*
A
3.24
(82)
B
2.74
(70)
D
1.61
(41)
E
6.40
(163)
C
4.79
(122)
Inches (mm)
Filter /
Regulators
WARNING
Lubricators
Ordering Information
Combos
Accessories
Port Size
3 1/2 Inch
4 3/4 Inch
07R
Pressure Range
Without Gauge
11 60 psig
13 125 psig
15 250 psig
With Gauge**
16 60 psig
18 125 psig
21 250 psig
13
Relief
Blank NPT
* Will be
Entered at
Factory
1* BSPP
---
Options
Blank
L
P
R
No Options
Preset
Non-Adjustable
Preset
Adjustable
Reverse Flow
** Includes 1-1/2"
Dial Face Gauge
Port Type
Engineering
Level
A Relieving
L Non-Relieving
Preset /
Pressure
Limited
Blank None
XXX* Preset
Pressure
* Available Preset /
Pressure Limited
Range, 10 to 90
psig in 5 psig
increments. For
higher pressures,
contact factory.
(Example:
065 = 65 psig)
C72
Catalog 0700P-E
07R413A*
07R313A*
20
10
30
50
70
25
Flow - dm /s
35
90
110
45
4
3
2
1
0
130
55
80
60
40
20
3/4 Inch Ports
100 PSIG (6.9 bar) Primary Pressure
0
10
10
30
15
50
70
90
35
45
110
55
130
150
65
170
Product
Selection
40
75
Flow - dm /s
n
Coalescers
Filters
60
CAUTION:
Filter /
Regulators
Regulators
Lubricators
Specifications
Materials of Construction
Adjusting Stem . ....................................................................... Steel
Body............................................................................................. Zinc
Bonnet, Piston Stem, Valve Poppet & Cap ......................... Plastic
Collar, Knob............................................................................. Plastic
Diaphragm.................................................................................Nitrile
Seals..........................................................................................Nitrile
Springs Poppet................................................................ Stainless
Control....................................................................... Steel
C73
Combos
80
Accessories
100
100
P3NR Series
3/4", 1", 1-1/2" Basic 1" Body
Catalog 0700P-E
PU
H T LO
O
CK
A (PB)
A
1/4" NPT
Gauge Ports
(2)
Product
Selection
Filters
Port Size
P3NR Regulator
Dimensions
NPT
Without Gauge
Coalescers
3/4"
P3NRA96BNN
1"
P3NRA98BNN
1-1/2"
P3NRA9PBNN
Regulators
Filter /
Regulators
3/4"
P3NRA96BNG
1"
P3NRA98BNG
1-1/2"
P3NRA9PBNG
A
3.62
(92)
A (PB)
5.91
(150)
B
3.62
(92)
C
6.38
(162)
D
2.08
(53)
E
8.46
(215)
Inches (mm)
WARNING
Lubricators
Ordering Information
Combos
Accessories
P3N
Design
Level
R a
8 b
Port Type
Port Size
Relief
Adjustment
Pressure Gauge
1* G Thread
(BSPP) Female
2 Rc Thread (BSPT)
Female
9 NPT Female
6 3/4" (w/o
Port Blocks)
8 1" (w/o
Port Blocks)
P 1-1/2" Port
Blocks (w/ 1"
Ported Body)
B Relieving
N Non-Relieving
N Non-Rising
Knob
Without Gauge
L 60 PSI (0 to 4 bar)
N 125 PSI (0 to 8 bar)
H 250 PSI (0 to 17 bar)
With Gauge
M 60 PSI (0 to 4 bar)
G 125 PSI (0 to 8 bar)
J 250 PSI (0 to 17 bar)
C74
P3NR Series
Air Line Regulators
Catalog 0700P-E
3
2
0
-100
100
-50
50
200
300
Flow - SCFM
100
400
150
200
500
45
30
15
15
600
60
250
0
-100
100
-50
50
200
300
Flow - SCFM
100
150
400
500
200
600
250
700
300
Flow - dm /s
Flow - dm /s
7
6
5
4
3
2
1
P3NR
105
90
Regulators
CAUTION:
Coalescers
75
60
45
30
15
0
-100
100
-50
50
200
300
Flow - SCFM
100
150
400
200
500
250
600
700
300
Flow - dm /s
n
Specifications
Materials of Construction
Adjusting Stem . ........................................................................ Steel
Body.................................................................................... Aluminum
Bonnet ................................................................................ Aluminum
Knob ........................................................................................ Plastic
Piston....................................................................................... Plastic
Poppet Assembly.....................................................................Brass
Seals...........................................................................................Nitrile
Springs Poppet & Control....................................................... Steel
C75
Product
Selection
30
75
Filters
45
90
Filter /
Regulators
60
Lubricators
75
Combos
90
1 Inch Ports
Primary Pressure 100 PSIG (6.9 bar)
105
Accessories
105
P3NR
120
P3NR
120
Standard Regulators
1/4, 3/8 & 1/2 Inch Ports
Catalog 0700P-E
IN
C
Product
Selection
OUT
.625 Dia.
15.8
C
Filters
Coalescers
Regulators
Port
Size
NPT
Relieving
BSPP
Relieving
Filter /
Regulators
1/4"
R119-02C
R119G02C
R119-03C
R119G03C
1/2"
R119-04C
R119G04C
3.00
(76)
Lubricators
R119-03CG
1/2"
R119-04CG
1.38
(35)
5.29
(134)
2.74
(70.5)
6.67
(169)
.90
(24)
5.34
(136)
3.25
(83)
6.90
(175)
1.45
(37)
R119-04C
3.56
(90)
R119-02CG
R119-02C, R119-03C
3/8"
3/8"
1/4"
Panel Mount
Version
1.56
(40)
inches (mm)
Combos
SCFM = Standard cubic feet per minute at 100 PSIG inlet, 75 PSIG no
flow secondary setting, and 20 PSIG pressure drop.
Accessories
Ordering Information
R
Port Threads
NPT
G BSPP
Port Size
02 1/4 Inch
03 3/8 Inch
04 1/2 Inch
119
02
Reduced
Pressure Range
A 0-25 PSIG
B 0-60 PSIG
C 0-125 PSIG
D 0-250 PSIG
/**
Options
G
K
P
X64**
X80*
X7
None
Gauge
Non-Relieving
Panel Mount
Fluorocarbon O-Rings
and Diaphragm
Reverse Flow
Brass Bottom Plug
Engineering
Level
* Will be
Entered at
Factory
C76
R119 Series
Standard Regulators
Catalog 0700P-E
Flow Characteristics
R119-02C
R119-03C
3
2
1
0
60
40
20
20
40
10
60
Flow - SCFM
20
80
30
100
40
6
5
4
3
2
1
0
120
50
75
50
25
0
0
25
50
10
20
Flow - dmn3/s
Flow Characteristics
75
Flow - SCFM
30
100
40
125
50
60
150
70
Flow - dmn3/s
Product
Selection
80
100
100
0
0
25
10
50
20
75
100
125
Flow - SCFM
30
40
50
60
150
70
175
80
200
90
Flow - dmn3/s
Relieving Diaphragm,
Valve Assembly (1/2"; 250 PSIG) . ...............................RK119A250
Spring Cage & T-Handle Kit (1/4 & 3/8)........................... RKC119Y
Spring Cage & Insert Only Kit (1/2)............................SAC18A3/BK
For Fluorocarbon Repair Kits, add X64 to Kit Number suffix.
Specifications
Gauge Ports (2)..................................................................... 1/4 Inch
Port Threads............................................................1/4, 3/8, 1/2 Inch
Repair Kits
Non-Relieving Diaphragm,
Valve Assembly (1/4", 3/8"; All PSIG) ................................RK118Y
Relieving Diaphragm,
Valve Assembly (1/4", 3/8"; All PSIG) ................................RK119Y
Non-Relieving Diaphragm,
Valve Assembly (1/2"; 25, 60, 125 PSIG)............................RK118A
Non-Relieving Diaphragm,
Valve Assembly (1/2"; 250 PSIG) . .............................. RK118A250
Relieving Diaphragm,
Valve Assembly (1/2"; 25, 60, 125 PSIG)............................RK119A
Coalescers
CAUTION:
Regulators
25
Filter /
Regulators
50
Lubricators
75
WARNING
Combos
Materials of Construction
Adjusting Screw, Springs......................................................... Steel
Body, Spring Cage.......................................................................Zinc
Bottom Plug............................................................................... Nylon
Innervalve.................................................................................. Brass
Seals........................................................................................ Buna N
C77
Accessories
Filters
R119-04C
100
R119 Series
3/4", 1", 1-1/4" & 1-1/2" Basic 1" Body
Catalog 0700P-E
IN
OUT
Product
Selection
Filters
1/4" NPT
Gauge Ports
(2)
Coalescers
B
D
Regulators
NPT
Port Size
Relieving
Filter /
Regulators
3/4"
R119-06C
A
4.69
(119)
B
1.87
(47)
C
8.15
(207)
D
4.38
(111)
E
10.02
(255)
N
1.61
(41)
Lubricators
1"
R119-08C
1-1/4"
R119-10C
1-1/2"
R119-12C
A
4.94
(125)
Combos
3/4"
R119-06CG
1"
R119-08CG
1-1/4"
R119-10CG
1-1/2"
R119-12CG
Accessories
Port Threads
NPT
G BSPP
Port Size
06
08
10
12
3/4 Inch
1 Inch
1-1/4 Inch
1-1/2 Inch
D
4.94
(125)
E
10.34
(263)
N
1.99
(50.6)
119
WARNING
SCFM = Standard Cubic Feet Per Minute at 100 psig Inlet, 75 psig No Flow
Secondary Setting, and 20 psig Pressure Drop.
C
8.53
(217)
inches (mm)
Standard part numbers shown bold. For other models refer to ordering
information below.
Ordering Information
B
1.81
(46)
06
Reduced
Pressure Range
C 0-125 psig
D 0-250 psig
/**
Options
Blank
G
K
X64
None
Gauge
Non-Relieving
Fluorocarbon O-Rings
and Diaphragm
X80 Reverse Flow
Engineering
Level
* Will be
Entered at
Factory
C78
R119 Series
Air Line Regulators
Catalog 0700P-E
Flow Characteristics
Flow Characteristics
R119-08C
R119-06C
0
0
50
100
20
150
200
250
Flow - SCFM
40
60
80
Flow -
100
dmn3/s
120
300
140
1
0
350
25
160
0
0
50
100
20
40
Flow Characteristics
1
0
80
100
120
140
160
400
180
50
25
0
0
100
40
200
300
400
Flow - SCFM
80
120
160
200
6
5
4
3
2
1
0
500
240
75
Coalescers
75
Flow - SCFM
60
350
R119-12C
300
100
250
Flow Characteristics
R119-10C
200
Flow - dmn3/s
100
6
150
Product
Selection
50
Filters
75
50
25
0
0
100
40
Flow - dmn3/s
200
300
400
Flow - SCFM
80
120
160
200
500
240
Flow - dmn3/s
CAUTION:
Lubricators
Specifications
Gauges
2" Dial Size, 1/4" Back Connection
0 to 60 psig (0 to 400 kPa) ........................................K4520N14060
Non-Relieving Diaphragm,
Valve Assembly (1-1/4", 1-1/2") .......................................... RK118D
Materials of Construction
Relieving Diaphragm,
Valve Assembly (3/4", 1") ................................................... RK119B
Relieving Diaphragm,
Valve Assembly (1-1/4", 1-1/2") .......................................... RK119D
C79
Regulators
25
1 Inch Ports
100 PSIG (6.9 bar)
Primary Pressure
Filter /
Regulators
50
Combos
75
Accessories
100
100
09R Series
2" Basic 2" Body
Catalog 0700P-E
High flow.
Balanced poppet for quick and accurate
regulation.
Product
Selection
C
E
Filters
Coalescers
Port Size
Regulators
09 Regulator
Dimensions
NPT
Without Gauge
09R813B*
2"
Filter /
Regulators
A
5.30
(135)
B
3.60
(91)
D
2.80
(71)
E
11.90
(302)
Inches (mm)
Lubricators
Combos
Ordering Information
Accessories
09R
Port Size
8 2 Inch
13
Pressure Range
13 125 psig
15 180 psig
Relief
B Relieving
M Non-Relieving
Engineering
Level
* Will be
Entered at
Factory
C80
C
9.10
(231)
09R Series
Air Line Regulators
Catalog 0700P-E
2
1
0
40
Product
Selection
60
20
200
100
400
600
800
200
300
1000
400
1200
Filters
80
500
Flow - dm /s
n
CAUTION:
WARNING
Filter /
Regulators
Coalescers
2 Inch Ports
100 PSIG (6.9 bar) Primary Pressure
Regulators
100
Specifications
Materials of Construction
Adjusting Stem & Springs ....................................................... Steel
Body.....................................................................Zinc Alloy, Die Cast
Bonnet, Piston Stem, Valve Poppet & Cap..................... Aluminum
Piston, Cap.............................................................................. Plastic
Seals...........................................................................................Nitrile
C81
Accessories
Combos
Lubricators
Catalog 0700P-E
1/8" NPT
Easily serviced.
1/4" NPT
Gauge Ports
(2)
Product
Selection
C
E
Filters
Port Size
NPT
Coalescers
Without Gauge
1/4"
10R115P*
3/8"
10R215P*
1/4"
10R121P*
3/8"
10R221P*
A
2.00
(51)
B
2.06
(52)
D
1.28
(32)
E
3.71
(94)
C
2.43
(62)
Inches (mm)
Filter /
Regulators
WARNING
Lubricators
Combos
Ordering Information
Accessories
10R
Port Size
1 1/4 Inch
2 3/8 Inch
Relief /
Gauge Options
15 P
Adjustment
P Pilot Operated
Engineering
Level
* Will be
Entered at
Factory
Without Gauge
14 Non-Relieving Piston
15 Relieving Piston
Port Type
Blank NPT
1 BSPP
Options
Blank No Options
* With Gauge
19 Non-Relieving Piston
21 Relieving Piston
* Includes 1-1/2" Dial
Face Gauge 0 to 160 psig
C82
Catalog 0700P-E
120
6
5
4
3
2
1
105
90
75
60
45
30
15
10
10
20
30
Flow (SCFM)
10
15
40
50
20
60
25
70
30
Product
Selection
Flow - dm /s
Filters
4
3
2
1
0
Coalescers
75
Regulators
90
60
45
30
15
0
10
10
20
30
Flow (SCFM)
10
15
40
20
50
60
25
70
30
Filter /
Regulators
105
Lubricators
120
Flow - dm /s
Specifications
Materials of Construction
Body............................................................................................. Zinc
Seals..........................................................................................Nitrile
C83
Accessories
Combos
Catalog 0700P-E
1/4" NPT
1/4" NPT
Gauge Ports
(2)
Product
Selection
C
E
Filters
NPT
Coalescers
Without Gauge
1/4"
11R115P*
3/8"
11R215P*
1/2"
11R315P*
Regulators
Filter /
Regulators
1/4"
11R121P*
3/8"
11R221P*
1/2"
11R321P*
A
2.81
(71)
B
2.74
(70)
D
1.39
(35)
E
4.44
(113)
Inches (mm)
WARNING
Lubricators
Combos
Ordering Information
Accessories
11R
Port Size
1 1/4 Inch
2 3/8 Inch
3 1/2 Inch
Relief /
Gauge Options
Without Gauge
14 Non-Relieving Piston
15 Relieving Piston
* With Gauge
19 Non-Relieving Piston
21 Relieving Piston
C
3.05
(77)
15
Adjustment
P Pilot Operated
Engineering
Level
* Will be
Entered at
Factory
Port Type
Blank NPT
1 BSPP
C84
Catalog 0700P-E
3
2
1
0
60
40
20
10
20
10
40
60
80
30
40
100
50
5
4
3
2
1
0
120
140
80
60
40
Product
Selection
80
20
10
20
10
40
60
80
30
40
100
50
120
140
60
Filters
100
100
Flow - dm /s
60
Coalescers
Flow - dm /s
Specifications
Materials of Construction
Body& Pilot Cap......................................................................... Zinc
Piston, Valve Poppet, & Collar.............................................. Plastic
Seals...........................................................................................Nitrile
Springs....................................................................................... Steel
C85
Accessories
Combos
Lubricators
Filter /
Regulators
Regulators
Catalog 0700P-E
1/4" NPT
1/4" NPT
Gauge Ports
(2)
Product
Selection
C
E
Filters
Port Size
NPT
Coalescers
Without Gauge
1/2"
12R315P*
3/4"
12R415P*
1/2"
12R321P*
3/4"
12R421P*
A
3.24
(82)
B
2.74
(70)
D
1.61
(41)
E
4.76
(121)
C
3.15
(80)
Inches (mm)
Filter /
Regulators
WARNING
Lubricators
Combos
Ordering Information
12R
Accessories
Relief /
Gauge Options
Port Size
3 1/2 Inch
4 3/4 Inch
14
15
19
21
Without Gauge
Non-Relieving Piston
Relieving Piston
*With Gauge
Non-Relieving Piston
Relieving Piston
15
Adjustment
P Pilot Operated
Engineering
Level
* Will be
Entered at
Factory
Port Type
Blank NPT
1 BSPP
2 BSPT
C86
Catalog 0700P-E
4
3
2
1
0
80
60
40
Product
Selection
20
20
10
10
40
20
60
80
100
120
30
40
50
60
140
180
160
70
80
200
90
220
100
Flow - dm /s
Specifications
Materials of Construction
Body& Pilot Cap......................................................................... Zinc
Piston, Valve Poppet, & Collar.............................................. Plastic
Seals...........................................................................................Nitrile
Springs........................................................................................ Steel
C87
Accessories
Combos
Lubricators
Filter /
Regulators
Regulators
Coalescers
Filters
100
P3NR Series
3/4", 1", 1-1/2" - Basic 1" Body
Catalog 0700P-E
A (PB)
A
1/4" NPT
SCFM
Product
Selection
1/4" NPT
Gauge Ports
(2)
D
Filters
Port Size
NPT
Without Gauge
Coalescers
3/4"
P3NRA96BPP
1"
1-1/2" #
P3NRA98BPP
P3NRA9PBPP
Regulators
Filter /
Regulators
3/4"
P3NRA96BPG
1"
P3NRA98BPG
1-1/2" #
P3NRA9PBPG
A
3.62
(92)
A (PB)
5.91
(150)
B
3.62
(92)
C
3.38
(86)
D
2.08
(53)
E
5.46
(139)
Inches (mm)
WARNING
Lubricators
Ordering Information
Combos
Accessories
P3N
Design
Level
R a
8 b
Port Type
Port Size
Relief
1 G Thread
(BSPP) Female
2 Rc Thread (BSPT)
Female
9 NPT Female
6 3/4" (w/o
Port Blocks)
8 1" (w/o
Port Blocks)
P 1-1/2" Port
Blocks (w/ 1"
Ported Body)
B Relieving
N Non-Relieving
Adjustment
P Pilot
Operated
Pressure Gauge
Without Gauge
P Pilot Operator
With Gauge
M 60 PSI (0 to 4 bar)
G 125 PSI (0 to 8 bar)
J 250 PSI (0 to 17 bar)
C88
P3NR Series
Pilot Controlled Regulators
Catalog 0700P-E
4
3
2
1
0
90
75
60
45
30
6
5
4
3
2
0
-100
100
-50
50
200
300
Flow - SCFM
100
400
150
500
200
600
90
75
60
45
30
15
15
1 Inch Ports
Primary Pressure 100 PSIG (6.9 bar)
105
250
0
-100
100
-50
50
200
300
Flow - SCFM
100
150
400
200
500
250
600
700
300
Product
Selection
105
P3NR
120
P3NR
120
Flow - dm /s
Flow - dm /s
Filters
2
1
0
Coalescers
Regulators
60
45
30
Filter /
Regulators
75
15
0
-100
100
-50
50
200
300
Flow - SCFM
100
150
400
200
500
250
600
700
300
Lubricators
90
Flow - dm /s
n
Specifications
Materials of Construction
Adjusting Stem.......................................................................... Steel
Body.................................................................................... Aluminum
Bonnet ................................................................................ Aluminum
Piston....................................................................................... Plastic
Poppet Assembly.....................................................................Brass
Seals..........................................................................................Nitrile
Springs Poppet........................................................................ Steel
* If 1-1/2 BSPP E02 fittings are required, use P3NKA0BMW.
C89
Combos
105
Accessories
P3NR
120
Catalog 0700P-E
R119 Series
C
Product
Selection
Filters
N C
B
Coalescers
Regulators
Filter /
Regulators
NPT
Relieving
3.00
(76)
Lubricators
3/8"
R119-03J
R119G03J
1/2"
R119-04J
R119G04J
1.38
(35)
1.98
(50)
2.74
(70)
3.55
(90)
1.57
(40)
2.33
(59)
3.25
(83)
3.90
(99)
1.91
(49)
R119-04J
3.56
(90)
R119-02J
R119-02J, R119-03J
BSPP
Relieving
1/4"
1.56
(40)
inches
(mm)
R119G02J
Combos
! WARNING
Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
Product rupture can cause serious injury.
Accessories
Ordering Information
R 119
Port Threads
NPT
G BSPP
Port Size
02 1/4 Inch
03 3/8 Inch
04 1/2 Inch
02
Reduced
Pressure Range
J Air Pilot
Operated
/**
Options
K
X64*
X71
X7
Engineering
Level
Non-Relieving
* Will be
Fluorocarbon
Entered at
O-Rings and
Factory
Diaphragm
Non-Bleed Pilot (For
use with Electronic
Controllers)
Brass Bottom Plug
* Brass Bottom Plug Standard
with X64 Option.
C90
R119 Series
Pilot Operated Regulators
Catalog 0700P-E
Flow Characteristics
R119-02J
R119-03J
2
1
0
50
25
20
10
40
60
80
Flow - SCFM
20
30
100
40
5
4
3
2
1
75
50
25
120
50
25
10
50
20
75
Flow - SCFM
30
Flow - dmn3/s
40
100
50
125
60
150
Product
Selection
75
70
Flow - dmn3/s
Flow Characteristics
R119-04J
Filters
100
100
1
0
Coalescers
Regulators
50
25
0
0
25
10
50
20
75
100
125
Flow - SCFM
30
40
50
60
150
70
175
80
Filter /
Regulators
200
90
Flow - dmn3/s
Specifications
Gauges
2" Dial Size, 1/4" Back Connection
0 to 60 PSIG (0 to 400 kPa) ..................................... K4520N14060
Pilot Port
1/4 & 3/8" Threads...................................................................... 1/8"
1/2" Threads............................................................................... 1/4"
Repair Kits
Non-Relieving Diaphragm,
Valve Assembly (1/2") ..................................................RK118X20A
Non-Relieving Diaphragm,
Valve Assembly (1/4", 3/8") ..........................................RK118X20Y
Air Consumption
Constant bleed from air pilot chamber: approx. 0.17 SCFM (10 SCFH)
Relieving Diaphragm,
Valve Assembly (1/2") ..................................................RK119X20A
Weight
R119-02J, R119-03J .................................... 1.6 lb. (0.73 kg) / Unit
19 lb. (8.62 kg) / 12-Unit Master Pack
Relieving Diaphragm,
Valve Assembly (1/4", 3/8") ..........................................RK119X20Y
Materials of Construction
Body, Ring, Top Plate ..................................................................Zinc
Bottom Plug............................................................................... Nylon
Innervalve . ................................................................................ Brass
Seals ....................................................................................... Buna N
C91
Lubricators
75
Combos
Accessories
100
R119 Series
3/4", 1", 1-1/4" & 1-1/2" Basic 1" Body
Catalog 0700P-E
C
Product
Selection
A
1/4" NPT
Gauge Ports
(2)
Filters
E
B
Coalescers
R119-06J, R119-08J
Pilot Regulator Dimensions
Regulators
A
4.72
(120)
NPT
Filter /
Regulators
Port Size
B
1.87
(47))
Lubricators
R119-06J
1"
R119-08J
1-1/4"
R119-10J
1-1/2"
R119-12J
C
2.94
(75)
D
4.38
(111)
E
4.81
(122)
N
2.47
(63)
R119-10J, R119-12J
Pilot Regulator Dimensions
Relieving
A
4.94
(125)
B
1.81
(46)
D
4.94
(125)
C
3.32
(84)
E
5.13
(130)
N
2.88
(73)
inches (mm)
Combos
WARNING
SCFM = Standard Cubic Feet Per Minute at 100 psig Inlet, 75 psig No
Flow Secondary Setting, and 20 psig Pressure Drop.
Accessories
Ordering Information
R
Port Threads
NPT
G BSPP
Port Size
06
08
10
12
3/4 Inch
1 Inch
1-1/4 Inch
1-1/2 Inch
119
06
Reduced
Pressure Range
J Air Pilot
Operated
C92
/**
Engineering
Level
Options
Blank
K
X64
X71
X80
None
Non-Relieving
Fluorocarbon O-Rings
and Diaphragm
Non-Bleed Pilot
(For use with
Electronic Controllers)
Reverse Flow
* Will be
Entered at
Factory
R119 Series
Pilot Controlled Regulators
Catalog 0700P-E
Flow Characteristics
R119-06J
R119-08J
50
100
20
150
200
250
Flow - SCFM
40
60
80
100
300
120
140
350
25
160
0
0
50
100
20
40
1
0
80
100
120
140
350
160
400
180
R119-12J
100
50
25
0
0
100
40
200
300
400
Flow - SCFM
80
120
160
200
6
5
4
3
2
1
0
500
75
Regulators
75
60
Flow Characteristics
300
Flow Characteristics
250
Flow - dmn3/s
100
200
Flow - SCFM
Flow - dmn3/s
R119-10J
150
50
25
0
0
240
100
40
200
300
400
Flow - SCFM
80
120
160
200
500
240
Flow - dmn3/s
Flow - dmn3/s
Specifications
Gauges
2" Dial Size, 1/4" Back Connection
0 to 60 psig (0 to 400 kPa) ........................................K4520N14060
Materials of Construction
Body, Ring, Top Plate ..................................................................Zinc
Bottom Plug, Innervalve .......................................................... Brass
Seals ....................................................................................... Buna N
C93
Product
Selection
Filters
50
Coalescers
25
Filter /
Regulators
75
Lubricators
50
1 Inch Ports
100 PSIG (6.9 bar)
Primary Pressure
Combos
75
Accessories
100
100
R119 Series
2" & 2-1/2" Basic 1" Body
Catalog 0700P-E
Product
Selection
A
1/4" NPT
Gauge Ports
(2)
Filters
C
E
Coalescers
Regulators
Port Size
NPT
R119-16J, R119-20J
Pilot Regulator Dimensions
Relieving
Filter /
Regulators
A
6.63
(168)
R119-16J
2-1/2"
R119-20J
B
3.09
(79)
C
7.78
(147)
D
7.31
(185)
inches (mm)
Lubricators
SCFM = Standard Cubic Feet Per Minute at 100 psig Inlet, 75 psig No
Flow Secondary Setting, and 20 psig Pressure Drop.
WARNING
Combos
Ordering Information
Accessories
Port Threads
NPT
G BSPP
E
10.87
(276)
119
Port Size
16 2 Inch
20 2-1/2 Inch
16
Reduced Pressure
Range
J Air Pilot
Operated
C94
R119 Series
Pilot Controlled Regulators
Catalog 0700P-E
Flow Characteristics
R119-16J, R119-20J
4
3
2
1
0
75
50
Product
Selection
2 Inch Ports
100 PSIG (6.9 bar)
Primary Pressure
25
200
100
400
200
600
800
1000
Flow - SCFM
300
400
500
1200
600
1400
700
1600
1800
Filters
100
800
Specifications
Gauges
2" Dial Size, 1/4" Back Connection
0 to 60 psig (0 to 400 kPa) ........................................K4520N14060
Materials of Construction
Body, Piston ....................................................................... Aluminum
Seals ....................................................................................... Buna N
Innervalve . ............................................................. Brass & Stainless
C95
Accessories
Combos
Lubricators
Filter /
Regulators
Regulators
Coalescers
Flow - dmn3/s
Prep-Air II
Air Preparation Units
Catalog 0700P-E
Filter / Regulators
Manual
Drain
Relieving
(With Gauge)
Automatic
Drain
Relieving
Product
Selection
Filters
Coalescers
Regulators
7
6
5
4
3
2
1
0
05E22A13A*
120
Filter / Regulators
105
90
75
60
45
30
15
0
10
10
20
10
30
40
Flow - SCFM
15
20
3
50
25
60
70
30
80
35
Flow - dm /s
n
Filter /
Regulators
Lubricators
WARNING
Combos
Accessories
CAUTION:
REGULATOR PRESSURE ADJUSTMENT The
working range of knob adjustment is designed to
permit outlet pressures within their full range. Pressure
adjustment beyond this range is also possible because
the knob is not a limiting device. This is a common
characteristic of most industrial regulators, and limiting
devices may be obtained only by special design.
For best performance, regulated pressure should
always be set by increasing the pressure up to the
desired setting.
C96
Prep-Air II
Air Preparation Units
Catalog 0700P-E
Filter / Regulators
Filter / Regulator
A
B
Regulators
Product
Selection
Filters
Coalescers
Accessories
Combos
Lubricators
Filter /
Regulators
Accepts
1/8 I.D. Tubing
Accepts
3/16 I.D. Tubing
(Overnight Drain)
(Spitter Drain)
C97
1/8" NPT
14E Series
1/8", 1/4" Basic 1/8" Body
Catalog 0700P-E
Features
C
Product
Selection
Filters
Twist Drain
Coalescers
Poly Bowl
Regulators
Metal Bowl
E
D
Distance Required
Accepts
1/8" Tubing
NPT
Port
Size
1/8"
14E01B13F*
14E05B13F*
1/4"
14E11B13F*
14E15B13F*
1/8"
14E03B13F*
14E07B13F*
1/4"
14E13B13F*
14E17B13F*
Filter /
Regulators
A
1.62
(41)
B
1.58
(40)
C
2.42
(61)
D
3.79
(96)
D
3.64
(92)
E
6.21
(158)
E
6.06
(154)
F
1.60
(41)
Lubricators
Inches (mm)
With Auto Drain
Ordering
Information
13
Accessories
Combos
14E
Port Size
Elements
Relief
Port Type
0 1/8 Inch
A 40 Micron
1 1/4 Inch
B 5 Micron
Z Adsorber
F Relieving
G Non-Relieving
H* Low Temp Relieving
Blank NPT
1 BSPP
2 BSPT
Preset / Pressure
Limited
Bowl Options
Polycarbonate Bowl
1 Twist Drain
5 Automatic Pulse Drain
Metal Bowl
3 Twist Drain
7 Automatic Pulse Drain
Pressure Range
Without
With
Gauge Gauge*
10 30 psig
15 30 psig
11 60 psig
16 60 psig
12 15 psig
17 15 psig
13 125 psig 18 125 psig
Engineering
Level
* Will be
Entered at
Factory
Options
Blank
L
P
S
T
---
No Options
Preset
Non-Adjustable
Preset Adjustable
Pressure
Limiter Max.
Adjustable
Pressure
Limiter Max.
Blank
XXX*
XXX*
None
Preset
Pressure
Pressure
Limited
* Available Preset /
Pressure Limited
Range, 10 to 90 psig
in 5 psig increments.
For higher pressures,
contact factory.
(Example:
65 = 65 psig)
0
C98
14E Series
Filter / Regulators
Catalog 0700P-E
Technical Information
Relief And Flow Characteristics
0
0
4
2
12
16
20
Flow - dm /s
10
24
28
12
20
32
40
14
8
4
12
16
20
Flow - dm /s
10
24
28
12
32
14
CAUTION:
WARNING
Regulators
Specifications
Automatic Pulse Drain Tube Barb........................................ 1/8 Inch
Bowl Capacity .......................................................................1 Ounce
Gauge Ports (2) (Can be used for Full Flow).......................... 1/8 Inch
Port Threads................................................................... 1/8, 1/4 Inch
*Tighten panel mount nut 2.8 to 3.4 Nm (25 to 30 in-lbs) of torque.
Product
Selection
Filters
20
60
Metal Bowl
Materials of Construction
Adjusting Nut............................................................................. Brass
Adjusting Stem & Spring .......................................................... Steel
Body.............................................................................................. Zinc
Bonnet, Knob, Seat, Piston, Holder & Deflector ...................Plastic
Bowls Available Transparent.................................... Polycarbonate
Metal (Without Sight Gauge) . ....................... Zinc
Drains Manual Twist Type
Body & Stem...........................................................Plastic
Seals........................................................................ Nitrile
Automatic Pulse Type
Piston & Seals......................................................... Nitrile
Stem, Seat, Adaptor & Washers....................... Aluminum
Filter Elements 5 Micron (Standard)......................................Plastic
40 Micron (Optional).................................... Plastic
Adsorber (Optional).................. Activated Charcoal
Seals.................................................................................................Nitrile
C99
Filter /
Regulators
40
80
Lubricators
60
Combos
80
Accessories
14E11B13F*
100
100
Coalescers
14E01B13F*
B34 Series
1/8", 1/4" Basic 1/8" Body
Catalog 0700P-E
Features
PU
SH
LO
1/8" NPT
Gauge Ports
(2)
Product
Selection
I
N
Filters
Coalescers
Distance Required
F To Remove All Bowls
Regardless Of
Drain Option
NPT
Port
Size
Poly Bowl
B344-01AGC
B344-02AGC
1/8"
1/4"
Regulators
B344-01DGC
B344-02DGC
1/8"
1/4"
Filter /
Regulators
A
1.54
(39.2)
C
2.68
(68.1)
E
6.31
(160.2)
F
1.65
(41.9)
D
3.63
(92.1)
Inches (mm)
With Auto Drain
Lubricators
Combos
Ordering Information
Accessories
B34
Number of
Ports
Port
Threads
2 2 Ports
4 4 Ports
NPT
G BSPP
02
Port Size
Bowl
01 1/8 Inch
02 1/4 Inch
A Polycarbonate
Bowl
D Metal without
Sight Gauge
A
Elements
G 5 Micron
C
Reduced
Pressure Range
A 0-25 PSIG
B 0-60 PSIG
C 0-125 PSIG
Options
Blank
G
K
P
S
None
Gauge
Non-Relieving
Panel Mount (Plastic)
Automatic Pulse
Drain
C100
B34 Series
Filter / Regulators
Catalog 0700P-E
40
30
20
10
10
15
20
25
30
35
1
0
40
40
30
20
10
0
10
10
15
20
25
30
35
40
10
15
Flow - dm /s
n
Flow - dm /s
n
15
WARNING
! CAUTION:
Specifications
Adjusting Knob.......................................................RRP-16-005-000
Bowl Kits
Zinc (D)............................................................................... BK505Y
Zinc with Automatic Pulse Drain (D).................................BK505SY
Polycarbonate (A)............................................................... BK504Y
Polycarbonate with Automatic Pulse Drain (A).................BK504SY
Drain Kits
Automatic Pulse Drain
(Maximum Pressure = 175 PSIG).................................... RK504SY
Filter Element Kits
5 Micron (All).................................................................FRP-96-729
Gauges
1-1/2" Dial Size, 1/8" Back Connection
0 to 60 PSIG (0 to 400 kPa).......................................K4515N18060
1-1/2" Dial Size, 1/8" Back Connection
0 to 160 PSIG (0 to 1100 kPa)................................... K4515N18160
Mounting Bracket Kit (Includes Plastic Panel Nut) ...... SA161X57
Panel Mount Nut
Plastic............................................................................... R05X51-P
Aluminum......................................................................... R05X51-A
Repair Kits
Non-Relieving Diaphragm, Valve Assembly (All)........ GRP-96-726
Relieving Diaphragm, Valve Assembly (All)................ GRP-96-725
Springs 0-25..................................................................GRP-95-111
0-60................................................................. GRP-96-718
0-125............................................................... GRP-96-717
Materials of Construction
Adjusting Knob ....................................................................... Acetal
Body.................................................................................... Aluminum
Bowls
Polycarbonate (A)..................................................... Polycarbonate
Metal (D)....................................................................................Zinc
Zinc with Automatic Pulse Drain
Elastomers............................................................................. Buna N
Filter Element ................................................. Sintered Polyethylene
Filter Retainer, Vane Plate ..................................................... Acetal
Innervalve, Diaphragm, Button, Drain . ................................. Brass
C101
Filters
50
Coalescers
60
Regulators
70
Filter /
Regulators
50
80
Lubricators
60
Combos
70
90
Accessories
80
100
90
100
6
Flow Characteristics
R344-02AGC
Product
Selection
Flow Characteristics
R344-01AGC
Catalog 0700P-E
Features
C
Product
Selection
Filters
NPT
Port
Size
Twist Drain
Coalescers
Regulators
05E12A13A*
05E1PA13A*
3/8"
05E22A13A*
05E2PA13A*
1/4"
05E14A13A*
3/8"
05E24A13A*
Filter /
Regulators
Lubricators
05E
13
E
D
Distance Required
F To Remove All
Bowls Regardless
Of Drain Option
B
2.06
(52)
C
3.16
(80)
D
5.35
(136)
E
8.51
(216)
F
1.77
(45)
Combos
Relief
Accessories
Blank NPT
1*
Blank None
BSPP
Bowl Options
Polycarbonate Bowl
Pressure Range
Without
Gauge
11 60 psig
13 125 psig
14 200 psig
With
Gauge*
16 60 psig
18 125 psig
19 200 psig
Engineering
Level
* Will be
Entered at
Factory
--Preset / Pressure
Limited
Port Type
A Relieving
L Non-Relieving
A 40 Micron
B 5 Micron
B
TO L O
Inches (mm)
With Twist Drain or Auto
Pulse Drain
Elements
Port Size
1 1/4 Inch
2 3/8 Inch
WARNING
Ordering
Information
SH
Accepts
1/8" Tubing
1/4"
PU
Options
Blank No Options
L Preset
Non-Adjustable
P Preset Adjustable
S Pressure Limiter
Max. Adjustable
T Pressure Limiter
Max. Non-Adj.
XXX*
XXX*
Preset
Pressure
Pressure
Limited
* Available Preset /
Pressure Limited
Range, 10 to 90 psig in
5 psig increments. For
higher pressures,
contact factory.
(Example:
065 = 65 psig)
C102
Catalog 0700P-E
0
10
10
20
10
30
40
Flow - SCFM
15
20
3
50
25
60
70
30
2
1
0
80
35
60
45
30
15
0
10
10
20
30
40
Flow - SCFM
10
15
20
3
50
25
60
70
30
80
35
Flow - dm /s
Flow - dm /s
CAUTION:
REGULATOR PRESSURE ADJUSTMENT The working range of knob adjustment is designed
to permit outlet pressures within their full range. Pressure adjustment beyond this range is also
possible because the knob is not a limiting device. This is a common characteristic of most
industrial regulators, and limiting devices may be obtained only by special design.
For best performance, regulated pressure should always be set by increasing the pressure up to
the desired setting.
Specifications
Materials of Construction
Adjusting Stem.......................................................................... Steel
Body............................................................................................. Zinc
Bonnet, Internal Parts............................................................ Plastic
Bowl Guard................................................................................. Steel
Collar........................................................................................ Plastic
Diaphragm.................................................................................Nitrile
Drain......................................................................................... Plastic
Filter Elements 40 Micron (Standard)................................. Plastic
5 Micron (Optional).................................... Plastic
Adsorber (Optional)................Activated Charcoal
Knob......................................................................................... Plastic
Seals..........................................................................................Nitrile
Sight Gauge......................................................... Polyamide (Nylon)
Springs Poppet & Control........................................................ Steel
C103
Product
Selection
15
75
Filters
30
90
Coalescers
45
105
Regulators
60
Filter /
Regulators
2
1
75
Lubricators
90
Combos
105
05E22A13A*
Accessories
120
05E12A13A*
120
Catalog 0700P-E
Features
Product
Selection
Filters
NPT
Port
Size
Coalescers
Twist Drain
Regulators
06E12A13A*
06E22A13A*
06E32A13A*
3/8"
1/2"
06E16A13A*
06E26A13A*
06E36A13A*
06E14A13A*
06E24A13A*
06E34A13A*
1/4"
3/8"
Filter /
Regulators
1/2"
06E18A13A*
06E28A13A*
06E38A13A*
Lubricators
Combos
06E
Accessories
Port Size
A 40 Micron
B 5 Micron
Distance Required
F To Remove All Bowls
Regardless Of
Drain Option
A
2.81
(71)
B
2.74
(70)
C
4.69
(119)
D
5.69
(145)
D
5.74
(146)
E
10.38
(264)
E
10.43
(265)
F
2.25
(57)
WARNING
13
Elements
1 1/4 Inch
2 3/8 Inch
3 1/2 Inch
Inches (mm)
With Twist Drain or Auto
Pulse Drain
Standard part numbers shown bold. For other models refer to ordering
information below.
For polycarbonate bowl see Caution on page C2.
SCFM = Standard cubic feet per minute at 100 psig inlet,
90 psig no flow secondary setting and 10 psig pressure drop.
NOTE: 2.00 Dia. (50.8 mm) hole required for panel mounting.
Max. panel thickness 1/4".
Ordering
Information
H T LO
O
PU
CK
---
Port Type
Relief
A Relieving
L Non-Relieving
Preset
Blank NPT
1* BSPP
Bowl Options
Polycarbonate Bowl
2 Metal Bowl Guard /
Twist Drain
6 Metal Bowl Guard /
Auto Float Drain
Metal Bowl
3 Twist Drain
4 Sight Gauge /
Twist Drain
7 Auto Float Drain
8 Sight Gauge /
Auto Float Drain
Pressure Range
Without
Gauge
11 60 psig
13 125 psig
15 250 psig
With
Gauge
16 60 psig
18 125 psig
21 250 psig
Engineering
Level
Options
Blank
L
* Will be
Entered at
P
Factory
No Options
Preset
Non-Adjustable
Preset Adjustable
Blank None
XXX* Preset
Pressure
* Available Preset
Range, 10 to 90 psig
in 5 psig increments.
For higher pressures,
contact factory.
(Example:
065 = 65 psig)
C104
Catalog 0700P-E
40
20
10
20
30
40
15
20
50
60
25
5
4
3
2
1
0
70
30
Flow - dm /s
80
60
40
20
10
20
30
40
15
50
20
60
25
70
30
Flow - dm /s
Product
Selection
60
CAUTION:
06E32A13A*
5
4
3
2
1
0
80
60
Filters
100
40
20
10
20
10
30
40
50
20
25
60
70
30
80
35
90
40
Flow - dm /s
Coalescers
80
06E22A13A*
100
06E12A13A*
100
Specifications
Bowl Capacity..............................................................................4.4 Ounces
Gauge Ports (2) . .............................................................................. 1/4 Inch
(Can be used as Additional Full Flow 1/4" Outlet Ports)
Port Threads.......................................................................1/4, 3/8, 1/2 Inch
Materials of Construction
C105
Filter /
Regulators
Lubricators
Combos
Accessories
Regulators
Catalog 0700P-E
Features
Product
Selection
Filters
NPT
Port
Size
Coalescers
Twist Drain
07E32A13A*
07E42A13A*
3/4"
07E36A13A*
07E46A13A*
Regulators
07E34A13A*
07E44A13A*
1/2"
3/4"
07E38A13A*
07E48A13A*
Filter /
Regulators
Combos
Distance Required
F To Remove All Bowls
Regardless Of
Drain Option
A
3.24
(82)
B
3.25
(83)
C
4.79
(122)
D
6.97
(177)
D
7.00
(178)
E
11.76
(299)
E
11.79
(299)
F
2.75
(70)
WARNING
Lubricators
07E
Inches (mm)
With Auto Float Drain
Standard part numbers shown bold. For other models refer to ordering
information below.
For polycarbonate bowl see Caution on page C2.
SCFM = Standard cubic feet per minute at 100 psig inlet,
90 psig no flow secondary setting and 10 psig pressure drop.
NOTE: 2.00 Dia. (50.8 mm) hole required for panel mounting. Max. panel thickness 1/4".
Ordering
Information
H T LO
O
PU
CK
13
---
Accessories
Port Type
Port Size
Elements
Relief
3 1/2 Inch
4 3/4 Inch
A 40 Micron
B 5 Micron
A Relieving
L Non-Relieving
Preset
Blank NPT
1* BSPP
Bowl Options
Polycarbonate Bowl
2 Metal Bowl Guard /
Twist Drain
6 Metal Bowl Guard /
Auto Float Drain
Metal Bowl
3 Twist Drain
4 Sight Gauge /
Twist Drain
7 Auto Float Drain
8 Sight Gauge /
Auto Float Drain
Pressure Range
Without
Gauge
11 60 psig
13 125 psig
15 250 psig
With
Gauge
16 60 psig
18 125 psig
21 250 psig
Engineering
Level
Options
Blank
* Will be
L
Entered at
Factory
P
No Options
Preset
Non-Adjustable
Preset Adjustable
Blank None
XXX* Preset
Pressure
* Available Preset
Range, 10 to 90 psig
in 5 psig increments.
For higher pressures,
contact factory.
(Example:
065 = 65 psig)
C106
Catalog 0700P-E
10
30
50
70
25
35
90
110
45
1
0
130
55
Flow - dm /s
n
40
20
10
30
15
50
70
90
35
Flow - dm3 /s
45
110
130
55
150
65
170
CAUTION:
75
Coalescers
Filters
Specifications
Bowl Capacity.............................................................................. 7.2 Ounces
Gauge Ports (2) . .............................................................................. 1/4 Inch
(Can be used as Additional Full Flow 1/4" Outlet Ports)
Port Threads.............................................................................. 1/2, 3/4 Inch
Materials of Construction
C107
Regulators
0
10
Product
Selection
60
Filter /
Regulators
20
80
Lubricators
40
Combos
60
Accessories
80
07E42A13A
100
07E32A13A
100
P3NE Series
3/4", 1", 1-1/2" Basic 1" Body
Catalog 0700P-E
A (PB)
A
Features
Product
Selection
Filters
Coalescers
NPT
Port Size
Twist Drain
P3NEA96GSMBNN
P3NEA96GSABNN
Regulators
1"
P3NEA98GSMBNN
P3NEA98GSABNN
1-1/2"*
P3NEA9PGSMBNN
P3NEA9PGSABNN
1/4" NPT
Gauge Ports
(2)
Bowl
F Removal
Clearance
H T LO
O
PU
CK
Filter /
Regulators
A
3.62
(92)
A (PB)
5.91
(150)
B
3.62
(92)
D
9.57
(243)
E
15.95
(405)
F
4.92
(125)
C
6.38
(162)
Inches (mm)
With Twist Drain or Auto Float Drain
WARNING
Lubricators
Combos
Ordering
Information
P3N
E a
M b
Accessories
Design
Level
Port Type
Port Size
6 3/4"
(w/o Port
Blocks)
8 1"
(w/o Port
Blocks)
P 1-1/2" Port
Blocks (w/
1" Ported
* 3/4 & 1 inch
meet ISO 1179-1 Body)
1* G Thread
(BSPP)
Female
2 Rc Thread
(BSPT)
Female
9 NPT
Female
Element
A Adsorber
E 5 Micron
G 40 Micron
Bowl
Drains
S Metal
M Twist Drain
Bowl
A Automatic
w/ Sight Float Drain
Gauge
Standard.
C108
Relief
B Relieving
N Non-
Relieving
Adjustment
N Non-
Rising
Knob
Pressure Range
w/o Gauge
L 60 PSI
(0 to 4 bar)
N 125 PSI
(0 to 8 bar)
H 250 PSI
(0 to 17 bar)
w/ Gauge
M 60 PSI
(0 to 4 bar)
G 125 PSI
(0 to 8 bar)
J 250 PSI
(0 to 17 bar)
P3NE Series
Filter / Regulators
Catalog 0700P-E
0
-100
100
-50
50
200
300
Flow - SCFM
100
150
400
200
500
600
45
30
15
15
60
250
0
-100
100
-50
50
200
300
400
Flow - SCFM
100
150
500
200
600
250
Flow - dm /s
Flow - dm /s
6
5
4
3
2
1
0
105
Coalescers
P3NE
90
75
60
45
Regulators
CAUTION:
120
30
15
0
-100
100
-50
50
200
300
Flow - SCFM
100
150
400
200
500
600
250
Flow - dm /s
n
Specifications
Bowl Kits
Metal Bowl Sight Gauge / Automatic Float Drain..P3NKA00BSA
Sight Gauge / Twist Drain.................. P3NKA00BSM
Sight Gauge / Push N Drain..............P3NKA00BSP
Bowl Latch Kit .......................................................................C11A33
Control Knob................................................................. P3NKA00PN
Drain Kit Automatic Float Drain.......................................... PS506P
Semi-Auto Drain.................................................. PS511P
Twist Drain........................................................... PS512P
Push N Drain...................................................... PS513P
Filter Element Kits 40 Micron ................................P3NKA00ESG
5 Micron................................... P3NKA00ESE
Adsorber................................... P3NKA00ESA
Gauges 60 psig (0 to 4.1 bar)................................... K4520N14060
160 psig (0 to 11.0 bar).................................K4520N14160
300 psig (0 to 20.0 bar)............................... K4520N14300
Mounting Bracket Kit*.................................................P3NKA00MW
Service Kit Relieving..................................................P3NKA00RR
Non-Relieving..........................................P3NKA00RN
Sight Gauge Kit .............................................................P3NKA00PE
Springs 1-60 psig Range.................................................C10A1304
2-125 psig Range................................................C10A1308
5-250 psig Range............................................... C10A1317
Materials of Construction
Adjusting Stem.......................................................................... Steel
Body, Bonnet, Bowl........................................................... Aluminum
Drain......................................................................................... Plastic
Filter Elements 40 Micron (Standard)................................. Plastic
5 Micron (Optional).................................... Plastic
Adsorber (Optional)................Activated Charcoal
Knob......................................................................................... Plastic
Piston....................................................................................... Plastic
Seals..........................................................................................Nitrile
Sight Gauge......................................................... Polyamide (Nylon)
Springs Poppet & Control........................................................ Steel
C109
Product
Selection
Filters
30
75
Filter /
Regulators
45
90
Lubricators
60
Combos
75
Accessories
90
1 Inch Ports
100 PSIG (6.9 bar) Primary Pressure
105
105
P3NE
120
P3NE
120
Catalog 0700P-E
Features
C
Product
Selection
Filters
Coalescers
Port
Size
S
PU
H T LO
O
1/4" NPT
Gauge Ports
(2)
Distance Required
To Remove All F
Bowls Regardless
Of Drain Option
Twist Drain
Regulators
12E23E13A*
12E33E13A*
12E43E13A*
1/2"
3/4"
Automatic Float Drain
Filter /
Regulators
12E27E13A*
12E37E13A*
12E47E13A*
3/8"
1/2"
3/4"
Lubricators
Combos
Accessories
Elements
Port Size
2 3/8 Inch
3 1/2 Inch
4 3/4 Inch
E Grade 6
H Grade 10
Bowl Options
Metal Bowl
3 Twist Drain
7 Automatic
Float Drain
A
3.24
(82)
B
3.25
(83)
C
4.79
(122)
D
8.20
(208)
D
8.17
(208)
E
12.99
(330)
E
12.96
(329)
F
3.29
(84)
Inches (mm)
With Twist Drain or Auto Float Drain
Ordering
Information 12E
NPT
3/8"
CK
Port Size
Without Gauge
11 60 psig
13 125 psig
15 250 psig
With Gauge
16 60 psig
18 125 psig
21 250 psig
WARNING
13
---
Port Type
Relief
A Relieving
Blank NPT
L Non-Relieving
Preset
Blank None
XXX* Preset
Pressure
1* BSPP
2 BSPT
Engineering
Level
* Will be
Entered at
Factory
Options
Blank
L
P
* Available Preset
Range, 10 to 90 psig
in 5 psig increments.
For higher pressures,
contact factory.
No Options
Preset
Non-Adjustable
Preset Adjustable
(Example:
065 = 65 psig)
C110
Catalog 0700P-E
Flow Characteristics
12E33E13A*
5
4
3
2
1
0
80
60
40
20
0
10
10
20
30
40
15
Flow - dm /s
20
50
60
25
70
Product
Selection
100
30
CAUTION:
Specifications
Bowl Capacity .................................................................7.2 Ounces
Gauge Ports (2) .................................................................... 1/4 Inch
(Can be used as Additional Full Flow 1/4" Outlet Ports)
Port Threads.......................................................... 3/8, 1/2, 3/4 Inch
Pressure & Temperature Ratings
Metal Bowl 0 to 250 psig (0 to 17.2 bar)
32F to 175F (0C to 80C)
C111
Filter /
Regulators
Materials of Construction
Lubricators
Combos
Accessories
For best performance, regulated pressure should always be set by increasing the pressure
up to the desired setting.
Regulators
Coalescers
Filters
Prep-Air II
Air Preparation Units
Catalog 0700P-E
Micro-Mist Lubricators
Micro-Mist Lubricators
10
.5
.4
.3
Product
Selection
.2
.1
0
.6
8
7
6
5
4
3
2
Flow Characteristics
15L11N*
1/4 Inch Ports
1
0
Filters
10
20
10
30
15
40
50
60
70
Flow - SCFM
20
25
30
80
35
90
40
100
45
Flow - dm /s
n
Lubricator Selection
Coalescers
Regulators
Filter /
Regulators
Lubricators
Combos
Accessories
F442 Oil
Quantity
Part Numbers
1 Quart
F442001
1 Gallon
F442002
12 Quart Case
F442003
4 Gallon Case
F442005
C112
Prep-Air II
Air Preparation Units
Catalog 0700P-E
Micro-Mist Lubricators
Lubricators
Micro-Mist
H
E
D
Combos
Lubricators
C113
Product
Selection
Filter /
Regulators
Accessories
Filters
Operation
Coalescers
The check ball (E) prevents reverse oil flow down the
pickup tube when air flow stops. Thus, oil delivery can
resume immediately when air flow restarts. Micro-Mist
Lubricators can only be filled when the air supply is
shut off.
Regulators
Catalog 0700P-E
Distance Required
To Remove Pressure
Fill Adapter
Product
Selection
A
B
F1
C1
C
Filters
Coalescers
Distance Required
F To Remove All
Bowls Regardless
Of Drain Option
Regulators
Port
Size
NPT
Twist Drain
15L Lubricator
Dimensions
No Drain
Filter /
Regulators
1/4"
15L12N*
3/8"
15L22N*
1/4"
15L14N*
3/8"
15L24N*
Lubricators
Combos
Ordering Information
Accessories
15L
Port Size
Bowl Options
1 1/4 Inch
2 3/8 Inch
Metal Bowl
Polycarbonate Bowl
4 Sight Gauge /
1 No Drain
2 Metal Bowl Guard / Twist Drain
8 Sight Gauge /
No Drain
Pressure Fill
5 Pressure Fill
6 Metal Bowl Guard /
Pressure Fill
A
2.00
(51)
B
2.06
(52)
C
2.26
(57)
C1
3.35
(85)
D
5.12
(130)
D
5.35
(136)
E
7.38
(187)
E
7.61
(193)
F
1.77
(45)
F
.39
(10)
Inches (mm)
With Twist Drain.
Fill Options
B With Fill Plug
F With Body
Pressure Fill
N No Fill Plug
Engineering
Level
* Will be
Entered at
Factory
Port Type
Blank NPT
1* BSPP
2 BSPT
Options
Blank No Options
C114
Catalog 0700P-E
.2
.1
0
.5
7
6
.4
.3
4
3
.2
Flow Characteristics
15L11N*
1/4 Inch Ports
1
0
10
20
10
30
15
40
50
60
70
Flow - SCFM
20
25
30
80
35
.1
90
40
100
.3
.6
.4
.6
.5
10
7
6
5
4
3
2
Flow Characteristics
15L21N*
3/8 Inch Ports
1
0
45
Product
Selection
10
20
10
40
20
Flow - dm /s
60
80
Flow - SCFM
30
40
3
100
50
120
140
60
Flow - dm /s
Filters
Specifications
Bowl Capacity ..................................................................2.0 Ounces
Minimum Flow for Lubrication ......................... 2 SCFM at 100 psig
Port Threads . ................................................................. 1/4, 3/8 Inch
Pressure & Temperature Ratings
Polycarbonate Bowl 0 to 150 psig (0 to 10.3 bar)
32F to 125F (0C to 52C)
Metal Bowl 0 to 250 psig (0 to 17.2 bar)
32F to 175F (0C to 80C)
Materials of Construction
Body............................................................................................. Zinc
Bowls Transparent .................................................... Polycarbonate
Metal (With Sight Gauge)................................................ Zinc
Bowl Guard................................................................................. Steel
Collar.........................................................................................Plastic
Drains Twist Body & Nut......................................................Plastic
Injector Meter Block & Base Assembly..................................Plastic
Seals........................................................................................... Nitrile
Sight Dome.................................................................. Polycarbonate
Sight Gauge........................................................... Polyamide (Nylon)
C115
Lubricators
Combos
Accessories
Filter /
Regulators
Regulators
Coalescers
Catalog 0700P-E
Features
Product
Selection
Filters
Coalescers
Port
Size
Distance Required
F To Remove All
Bowls Regardless
Of Drain Option
NPT
Twist Drain
16L Lubricator
Dimensions
No Drain
Regulators
Filter /
Regulators
1/4"
16L12B*
3/8"
16L22B*
1/2"
16L32B*
1/4"
16L14B*
3/8"
16L24B*
1/2"
16L34B*
Lubricators
Combos
Ordering Information
Accessories
16L
Port Size
1 1/4 Inch
2 3/8 Inch
3 1/2 Inch
B
2.74
(70)
C
2.24
(57)
D
5.58
(142)
D
5.69
(145)
E
7.82
(199)
E
7.93
(201)
F
2.25
(57)
Inches (mm)
With Twist Drain.
Options
Bowl Options
Polycarbonate Bowl
2 Metal Bowl Guard / No Drain
6 Metal Bowl Guard / Pressure Fill
K Metal Bowl Guard /
Auto Fill Device
N Metal Bowl Guard / Twist Drain
A
2.81
(71)
Metal Bowl
4 Sight Gauge /
Twist Drain
8 Sight Gauge /
Pressure Fill
M Sight Gauge /
Auto Fill Device
Engineering
Level
* Will be
Entered at
Factory
Port Type
Blank NPT
1* BSPP
* 1/4 & 3/8 inch
meet ISO 1179-1
Standard.
C116
Catalog 0700P-E
.2
3
2
.1
Flow Characteristics
16L12B* 1/4 Inch Ports
0
10
20
30
40
Flow - SCFM
10
15
50
20
3
60
25
70
30
Flow Characteristics
16L22B* 3/8 Inch Ports
0
10
20
10
20
35
90
40
100
45
10.3 bar
150 PSIG
Coalescers
5
4
3
1
0
Regulators
Flow Characteristics
16L32B* 1/2 Inch Ports
0
10
20
10
30
15
40
20
50
60
70
80
90
Flow - SCFM
25
30
35
40
3
100
45
110
50
120
130
140
150
55
60
65
70
Filter /
Regulators
.1
30
80
.2
70
.3
25
Flow - dm /s
.4
60
Flow - SCFM
15
Flow - dm /s
50
40
30
Flow - dm /s
n
Specifications
Materials of Construction
Body............................................................................................. Zinc
Bowls Transparent .................................................... Polycarbonate
Metal (With Sight Gauge)................................................ Zinc
Bowl Guard................................................................................. Steel
Collar.........................................................................................Plastic
Drain Twist Body & Nut........................................................Plastic
Injector Meter Block & Base Assembly..................................Plastic
Seals........................................................................................... Nitrile
Sight Dome.................................................................. Polycarbonate
Sight Gauge........................................................... Polyamide (Nylon)
C117
Lubricators
1
0
Product
Selection
Filters
.3
Combos
.1
Accessories
.2
.3
.4
.4
Catalog 0700P-E
Features
Product
Selection
E
D
Filters
Coalescers
Port
Size
Distance Required
F To Remove All
Bowls Regardless
Of Drain Option
NPT
Twist Drain
17L Lubricator
Dimensions
No Drain
Regulators
Filter /
Regulators
1/2"
17L32B*
3/4"
17L42B*
1/2"
17L34B*
3/4"
17L44B*
Lubricators
A
3.24
(82)
B
3.25
(83)
C
2.41
(61)
D
6.86
(174)
D
6.95
(177)
E
9.09
(231)
E
9.35
(237)
F
2.75
(70)
Inches (mm)
With Twist Drain.
Combos
Ordering Information
Accessories
17L
Port Size
3 1/2 Inch
4 3/4 Inch
Options
Bowl Options
Polycarbonate Bowl
2 Metal Bowl Guard / No Drain
6 Metal Bowl Guard / Pressure Fill
K Metal Bowl Guard /
Auto Fill Device
N Metal Bowl Guard / Twist Drain
Metal Bowl
4 Sight Gauge /
Twist Drain
8 Sight Gauge /
Pressure Fill
M Sight Gauge /
Auto Fill Device
Engineering
Level
* Will be
Entered at
Factory
Port Type
Blank NPT
1 BSPP
*1/2 inch meets
ISO 1179-1
Standard.
C118
Catalog 0700P-E
.2
.1
4
3
2
Flow Characteristics
17L32B* 1/2 Inch Ports
&
17L42B* 3/4 Inch Ports
1
0
10
20
10
30
15
40
20
50
60
70
80
Flow - SCFM
25
30
35
40
3
90
100
45
110
50
120
130
140
150
55
60
65
70
Product
Selection
.3
.4
Filters
Flow - dm /s
Materials of Construction
Body............................................................................................. Zinc
Bowls Transparent .................................................... Polycarbonate
Metal (With Sight Gauge)................................................ Zinc
Bowl Guard................................................................................. Steel
Collar...........................................................................Plastic or Metal
Drain Twist Body & Nut........................................................Plastic
Injector Meter Block & Base Assembly..................................Plastic
Seals........................................................................................... Nitrile
Sight Dome.................................................................. Polycarbonate
Sight Gauge........................................................... Polyamide (Nylon)
C119
Combos
Accessories
Specifications
Lubricators
Filter /
Regulators
Regulators
Coalescers
Catalog 0700P-E
Notes
Prep-Air II
Air Preparation Units
C
Product
Selection
Filters
Coalescers
Regulators
Filter /
Regulators
Lubricators
Combos
Accessories
C120
Prep-Air II
Air Preparation Units
Catalog 0700P-E
Mist Lubricators
Mist Lubricators
3
2
1
Flow Characteristics
06L32B* 1/2 Inch Ports
0
10
20
10
30
15
40
20
50
25
60
70
80
Flow - SCFM
30
35
40
3
90
100
45
110
50
120
55
130
140
150
60
65
70
Flow - dm /s
n
1-1/2 Inch
F442 Oil
Quantity
Part Numbers
1 Quart
F442001
1 Gallon
F442002
12 Quart Case
F442003
4 Gallon Case
F442005
Accessories
Combos
Product
Selection
Filters
Coalescers
.1
Regulators
.2
Filter /
Regulators
.3
10.3 bar
150 PSIG
.4
Lubricators
Prep-Air II
Air Preparation Units
Catalog 0700P-E
Mist Lubricators
Lubricators
Mist
These lubricators inject an oil aerosol into the flowing
air stream to automatically provide the proper amount
of internal lubrication to air operated tools or other
pneumatic devices.
F
B
Operation
Product
Selection
Filters
Coalescers
Regulators
Filter /
Regulators
Lubricators
Combos
G
H
E
D
J
K
D
Accessories
C122
02L Series
1/4" & 3/8" Basic 1/4" Body
Catalog 0700P-E
Small / lightweight.
* Inlet pressure 90 psig (6.2 bar). Pressure drop 5 PSID (0.3 bar).
Automatic lubrication
with air tool operation.
Materials of Construction
Application
In-Line Lubricators assure proper lubrication for small
pneumatic hand tools. These in-line lubricators put the
oil source right at the tool. Oil capacity is 1/4 oz. (1 ml),
enough to last through an average 8-hour shift. This
lubricator requires cyclical or intermittent airflow for
proper operation, and consequently works best when
installed at the tool inlet or on a short hose near the
tool. The 02L cannot be filled under pressure.
Body.................................................................................... Aluminum
Seals...........................................................................................Nitrile
Suggested Lubricant F442 Oil
Petroleum based oil of 100 to 200 SSU viscosity at 100F (38C)
and an aniline point greater than 200F (93C)
(DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS
CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR
SYNTHETIC OILS.)
Replacement Kits
Fill Plug Kit Brass Fill Plug and O-ring............................. PS434
O-ring Repair Kit..................................................................... PS435
02LFB, 02L1B
C B
0.3
0.2
PSID
30
2.4
60
4.1
120 150
8.2 10.3
90
6.2
Lubricators
PRESSURE DROP
bar
Inlet Pressure
PSIG
bar
2
0.1
Outlet
Female
0
Dimensions
02L2B
B
1.305
(33)
1.305
(33)
1.305
(33)
C
1.125
(28.5)
1.125
(28.5)
1.125
(28.5)
D
.65
(16.5)
.65
(16.5)
.65
(16.5)
15
5
Inches (mm)
0.3
0.2
20
25
10
AIR FLOW RATE
30
35
SCFM
40
20 dm3/s
15
02L2B
Inlet Pressure
PSIG
bar
PSID
02L1B
A
2.65
(67)
2.93
(74)
3.19
(81)
bar
02LFB
10
PRESSURE DROP
Part Number
30
2.4
60
4.1
90
6.2
120
8.2
150
10.3
25
30
35
40
2
0.1
Ordering Information
Port Size
1/4"
3/8"
02LFB
N/A
02L1B
02L2B
0
0
0
C123
10
15
5
20
10
AIR FLOW RATE
15
SCFM
20 dm3/s
Combos
Accessories
Inlet
C
Product
Selection
Reduces downtime of
air operated equipment,
saves money.
Filters
Coalescers
Regulators
Specifications
Filter /
Regulators
Features
04L Series
1/8", 1/4" Basic 1/8" Body
Catalog 0700P-E
Features
Proportional oil delivery over a wide range
of air flows.
Product
Selection
Filters
Distance Required
Coalescers
F To Remove All
Bowls Regardless
Of Drain Option
Port
Size
04L Lubricator
Dimensions
NPT
Twist Drain
No Drain
Regulators
Poly Bowl
1/8"
04L00G*
1/4"
04L10G*
Filter /
Regulators
04L03G*
1/4"
04L13G*
Lubricators
Combos
Ordering Information
Accessories
04L
Port Size
0 1/8 Inch
1 1/4 Inch
Metal Bowl
3 Twist Drain
B
1.56
(40)
C
2.16
(55)
D
3.64
(92)
D
3.78
(96)
E
5.80
(147)
E
5.94
(151)
F
1.60
(41)
Inches (mm)
With Twist Drain.
Body
Bowl Options
Polycarbonate Bowl
0 Without Drain
1 Twist Drain
A
1.73
(44)
G No Fill Plug
Engineering
Level
* Will be
Entered at
Factory
Port Type
Blank NPT
1 BSPP
2 BSPT
C124
04L Series
Air Line Mist Lubricators
Catalog 0700P-E
2.4 bar
35 PSIG
10
10.3 bar
150 PSIG
.3
.2
6
5
4
3
Product
Selection
.4
2
.1
Flow Characteristics
04L00G* 1/8 Inch Ports
1
0
10
15
6
20
Flow - SCFM
8
10
25
12
30
14
40
35
16
18
20
Flow - dm /s
Filters
10
Coalescers
2.4 bar
.6
.3
.2
Regulators
7
6
5
Filter /
Regulators
.4
8
.5
4
3
Flow Characteristics
04L10G* 1/4 Inch Ports
0
10
15
20
Flow - SCFM
8
10 3
Flow - dm /s
25
12
30
14
35
15
40
16
20
Materials of Construction
Body............................................................................................. Zinc
Specifications
Bowl Capacity........................................................................1 Ounce
C125
Combos
Accessories
1
0
Lubricators
2
.1
Catalog 0700P-E
Features
Proportional oil delivery over a wide range
of air flows.
Product
Selection
SCFM
Filters
Distance Required
F To Remove All
Bowls Regardless
Of Drain Option
Coalescers
Port
Size
NPT
Twist Drain
06L Lubricator
Dimensions
No Drain
Regulators
Filter /
Regulators
1/4"
06L12B*
3/8"
06L22B*
1/2"
06L32B*
1/4"
06L14B*
3/8"
06L24B*
1/2"
06L34B*
Lubricators
Combos
Ordering Information
Accessories
06L
Port Size
1 1/4 Inch
2 3/8 Inch
3 1/2 Inch
B
2.74
(70)
C
2.24
(57)
D
5.58
(142)
D
5.69
(145)
E
7.82
(199)
E
7.93
(201)
F
2.25
(57)
Inches (mm)
With Twist Drain.
Options
Bowl Options
Polycarbonate Bowl
2 Metal Bowl Guard / No Drain
6 Metal Bowl Guard / Pressure Fill
K Metal Bowl Guard /
Auto Fill Device
N Metal Bowl Guard / Twist Drain
A
2.81
(71)
Metal Bowl
4 Sight Gauge /
Twist Drain
8 Sight Gauge /
Pressure Fill
M Sight Gauge /
Auto Fill Device
Engineering
Level
* Will be
Entered at
Factory
Port Type
Blank NPT
1* BSPP
* 1/4 & 3/8 inch
meet ISO 1179-1
Standard.
C126
Technical Information
.3
4
3
.2
.1
Flow Characteristics
06L12B* 1/4 Inch Ports
0
10
20
30
40
50
60
Flow - SCFM
10
15
20
3
25
70
30
Flow Characteristics
06L22B* 3/8 Inch Ports
0
10
20
40
30
10
15
30
35
90
40
100
45
10.3 bar
150 PSIG
Coalescers
5
4
3
2
1
25
80
.1
20
70
2.4 bar
.2
60
Flow - dm /s
.3
50
Flow - SCFM
Flow - dm /s
.4
Flow Characteristics
06L32B* 1/2 Inch Ports
0
10
20
10
30
15
40
50
20
25
60
70
80
Flow - SCFM
30
35
40
3
90
100
45
110
50
120
55
130
140
150
60
65
70
Flow - dm /s
n
Specifications
No Drain........................................................ PS746P
Twist Drain..................................................... PS717P
Pressure Fill.................................................. PS719P
Remote Fill.................................................... PS728P
Materials of Construction
Body............................................................................................. Zinc
Bowls Transparent . .................................................. Polycarbonate
Metal (With Sight Gauge)............................................... Zinc
Bowl Guard................................................................................. Steel
Collar.........................................................................................Plastic
Drain Twist Body & Nut........................................................Plastic
Injector Meter Block & Base Assembly..................................Plastic
Seals........................................................................................... Nitrile
Sight Dome.................................................................. Polycarbonate
Sight Gauge........................................................... Polyamide (Nylon)
C127
Regulators
Filter /
Regulators
Lubricators
Combos
.1
.2
.4
.3
.4
Accessories
Product
Selection
Filters
Catalog 0700P-E
Catalog 0700P-E
Features
Proportional oil delivery over a wide range
of air flows.
Product
Selection
SCFM
Filters
Distance Required
F To Remove All
Bowls Regardless
Of Drain Option
Coalescers
Port
Size
NPT
Twist Drain
07L Lubricator
Dimensions
No Drain
Regulators
Filter /
Regulators
1/2"
07L32B*
3/4"
07L42B*
1/2"
07L34B*
3/4"
07L44B*
Lubricators
A
3.24
(82)
B
3.25
(83)
C
2.41
(61)
D
6.86
(174)
D
6.95
(177)
E
9.09
(231)
E
9.35
(237)
F
2.75
(70)
Inches (mm)
With Twist Drain.
Combos
Ordering Information
Accessories
07L
Port Size
3 1/2 Inch
4 3/4 Inch
Options
Bowl Options
Polycarbonate Bowl
2 Metal Bowl Guard / No Drain
6 Metal Bowl Guard / Pressure Fill
K Metal Bowl Guard /
Auto Fill Device
N Metal Bowl Guard / Twist Drain
Metal Bowl
4 Sight Gauge /
Twist Drain
8 Sight Gauge /
Pressure Fill
M Sight Gauge /
Auto Fill Device
Engineering
Level
* Will be
Entered at
Factory
Port Type
Blank NPT
1* BSPP
* 1/2 inch meets
ISO 1179-1
Standard.
C128
Catalog 0700P-E
.1
4
3
2
Flow Characteristics
07L32B* 1/2 Inch Ports
&
07L42B* 3/4 Inch Ports
1
0
10
20
10
30
15
40
20
50
60
70
80
Flow - SCFM
25
30
35
40
3
90
100
45
110
50
120
130
140
150
55
60
65
70
Flow - dm /s
Materials of Construction
Body............................................................................................. Zinc
Bowls Transparent..................................................... Polycarbonate
Metal (With Sight Gauge)................................................ Zinc
Bowl Guard................................................................................. Steel
Collar...........................................................................Plastic or Metal
Drain Twist Body & Nut........................................................Plastic
Injector Meter Block & Base Assembly..................................Plastic
Seals........................................................................................... Nitrile
Sight Dome.................................................................. Polycarbonate
Sight Gauge........................................................... Polyamide (Nylon)
C129
Combos
Specifications
Accessories
Lubricators
Filter /
Regulators
Regulators
Coalescers
Product
Selection
.2
Filters
.3
.4
P3NL Series
3/4", 1", & 1-1/2" Basic 1" Body
Catalog 0700P-E
Features
Port blocks (PB) available to provide 1-1/2" port
extension to 1" ported bodies.
Filters
Distance Required
F To Remove All
Bowls
Coalescers
P3NL Lubricator
Dimensions
NPT
Port
Size
No Drain
Regulators
Filter /
Regulators
3/4"
P3NLA96LSN
1"
P3NLA98LSN
1-1/2"#
P3NLA9PLSN
Lubricators
A
3.62
(92)
APB
5.91
(150)
B
3.62
(92)
C
2.81
(71)
D
9.00
(229)
E
11.81
(300)
F
4.92
(125)
Inches (mm)
Combos
Ordering Information
Accessories
Design
Level
P3N
Port Type
1* G Thread
(BSPP) Female
2 Rc Thread
(BSPT) Female
9 NPT Female
* 3/4 & 1 inch meet ISO
1179-1 Standard.
L a
Port Size
6 3/4" (w/o
Port Blocks)
8 1" (w/o
Port Blocks)
P 1-1/2" Port
Blocks (w/ 1"
Ported Body)
L s
Type
Oil Mist
L w/ Polycarbonate
Sight Dome
A w/ Nylon
Sight Dome
Bowl
S Metal Bowl w/
Sight Gauge
A Auto Fill /
Fill Plug
N No Drain, Solid
Bowl / Fill Plug
M Twist Drain /
Fill Plug
H No Drain / Body
Pressure Fill
J Twist Drain / Body
Pressure Fill
C130
P3NL Series
Air Line Mist Lubricators
Catalog 0700P-E
.3
.2
3
2
.1
Flow Characteristics
P3NL 3/4 Inch Ports
1
0
0
100
50
200
300
400
Flow - SCFM
100
150
3
500
200
5
4
3
2
Flow Characteristics
P3NL 1 Inch Ports
600
0
0
100
50
250
200
300
100
150
Coalescers
8
7
6
5
Regulators
.1
300
.6
.2
250
700
10
.3
200
600
.4
500
Flow - dm /s
Flow - dm /s
.5
400
Flow - SCFM
Product
Selection
.4
Filters
4
3
2
Flow Characteristics
P3NL 1-1/2 Inch Ports
1
0
0
100
50
200
300
400
Flow - SCFM
100
150
200
Flow - dm3 /s
500
600
250
Filter /
Regulators
.1
.5
700
300
Lubricators
Specifications
Materials of Construction
Body, Bowl.......................................................................... Aluminum
Drains: Twist Drain (Optional)....................................................Plastic
Injector Meter Block & Base Assembly..................................Plastic
Seals........................................................................................... Nitrile
Sight Dome.................................................................. Polycarbonate
Sight Gauge........................................................... Polyamide (Nylon)
C131
Combos
.2
.3
.6
.4
.5
10
Accessories
10
.6
L606 Series
3/4", 1"
Catalog 0700P-E
F
0
A
D
7 6 5 4 3
3 2 1 0 9
Product
Selection
Filters
E
B
Coalescers
Port Size
NPT
BSPP
Regulators
L606-06W
L606G06W
1"
L606-08W
L606G08W
Filter /
Regulators
L606-06E
L606G06E
1"
L606-08E
L606G08E
L606-06W, L606-08W
Lubricators
4.97
(126)
7.25
(184)
4.97
(126)
10.75
(273)
5.00
(127)
9.40
(239)
2.63
(66.7)
4.06
(103)
9.88
(251)
2.48
(63.1)
L606-06E, L606-08E
2.63
(66.7)
4.06
(103)
13.38
(340)
2.48
(63.1)
L606-06G, L606-08G
3/4"
L606-06G
L606G06G
1"
L606-08G
L606G08G
2.62
(66)
4.06
(103)
12.02
(305)
2.50
(64)
inches
(mm)
Combos
SCFM = Standard cubic feet per minute at 100 psig inlet, and 5 psig
pressure drop.
Accessories
Ordering Information
Port Threads
NPT
G BSPP
606
Port Size
06 3/4 Inch
08 1 Inch
Bowl Capacity
E
32 oz.
G
64 oz.
W
16 oz.
06
Bowl
Description
Size
Large Capacity
3/4" & 1"
without Sight Gauge
with Drain
Large Capacity
3/4" & 1"
with Sight Gauge
Metal with
3/4" & 1"
Sight Gauge
& Drain
C132
/**
Options
Blank
H
X9*
None
Button Head Fill Fitting
Manual Twist Drain
(Increases Product
Length by 9/16 Inch)
Engineering
Change Designator
Will be entered at
factory.
L606 Series
Air Line Mist Lubricators
Catalog 0700P-E
1.7
25
Flow Characteristics
F606-06W
3/4-inch Port
C
0
50
20
100
40
150
60
200
250
Flow - SCFM
80
100
120
Flow - dmn3/s
E
1.7
25
300
140
350
160
400
180
450
Product
Selection
.1
3 2 1 0 9
200
10.3
.2
L606-08G
.1
Coalescers
.3
Flow Characteristics
F606-08W
1-inch Port
50
20
100
40
150
60
200
250
Flow - SCFM
80
100
120
Flow - dmn3/s
300
140
350
160
400
180
450
200
Mounting Bracket
3/4 Inch units (2 required per unit) .............................SA200AW57
1 Inch units (2 required per unit) ............................... SA200CW57
Weight
Aluminum Bowl (E)........................................5.5 lb. (2.49 kg) / Unit
Repair Kits
Needle Valve Assembly (All) ............................................. RK606Y
Sight Gauge Bowl Repair Kit (W) ................................RKB605WB
Sight Gauge Bowl Repair Kit (G) . ............................RKB606X30B
Specifications
Bowl Capacity
Aluminum (E) .................................................................32 Ounces
Aluminum with Polycarbonate Sight Gauge (G) ...........64 Ounces
Zinc with Nylon Sight Gauge (W) .................................. 16 Ounces
Port Threads . ................................................................... 3/4, 1 Inch
Pressure & Temperature Ratings
Aluminum Bowl (E)..............................0 to 300 psig (0 to 20.4 bar)
40F to 150F (4.4C to 65.6C)
Aluminum Bowl with
Polycarbonate Sight Gauge (G) ......... 0 to 150 psig (0 to 10.2 bar)
40F to 125F (4.4C to 52C)
Materials of Construction
Body..............................................................................................Zinc
Bowls
(E)..................................................................................... Aluminum
(G)............................... Aluminum with Polycarbonate Sight Gauge
(W)..................................................... Zinc with Nylon Sight Gauge
Seals....................................................................................... Buna N
C133
Filters
7 6 5 4 3
Regulators
A
D
Filter /
Regulators
.2
Lubricators
3
4
Combos
7
5
Accessories
.3
1
8
6
L606 Series
1-1/4", 1-1/2"
Catalog 0700P-E
F
0
A
D
3 2 1 0 9
7 6 5 4 3
Product
Selection
Filters
E
B
Coalescers
Port Size
NPT
BSPP
Regulators
L606-10W
L606G10W
1-1/2"
L606-12W
L606G12W
Filter /
Regulators
L606-10E
L606G10E
1-1/2"
L606-12E
L606G12E
Lubricators
4.97
(126)
7.63
(194)
4.97
(126)
11.13
(283)
5.00
(127)
7.99
(203)
L606-10W, L606-12W
2.84
(72.2)
4.81
(122)
10.47
(266)
2.48
(63.1)
L606-10E, L606-12E
2.84
(72.2)
4.81
(122)
13.97
(255)
2.48
(63.1)
L606-10G, L606-12G
1-1/4"
L606-10G
L606G10G
1-1/2"
L606-12G
L606G12G
2.84
(72.2)
4.81
(122)
12.80
(325)
2.50
(64)
inches
(mm)
Combos
SCFM = Standard cubic feet per minute at 100 psig inlet, and 5 psig
pressure drop.
Accessories
Ordering Information
Port
Threads
NPT
G BSPP
Port Size
10 1-1/4 Inch
12 1-1/2 Inch
606
10
Bowl
Bowl Capacity Description
Size
E
32 oz. Large Capacity
1-1/4" & 1-1/2"
without Sight Gauge
with Drain
G
64 oz. Large Capacity
1-1/4" & 1-1/2"
with Sight Gauge
W
16 oz. Metal with
1-1/4" & 1-1/2"
Sight Gauge
& Drain
C134
/**
Options
Blank
H
X9*
None
Button Head Fill Fitting
Manual Twist Drain
(Increases Product
Length by 9/16 Inch)
Engineering
Change Designator
Will be entered at
factory.
L606 Series
Air Line Mist Lubricators
Catalog 0700P-E
1.7
25
10.3
7
5
.2
A
D
7 6 5 4 3
.1
3 2 1 0 9
Flow Characteristics
L606-10W
1-1/4-inch Port
C
0
50
20
100
40
150
60
200
250
Flow - SCFM
80
100
120
Flow - dmn3/s
300
140
350
160
400
180
450
200
Product
Selection
.3
8
6
Coalescers
Regulators
.1
150
Flow Characteristics
L606-12W
1-1/2-inch Port
50
20
100
40
150
60
200
250
Flow - SCFM
80
100
120
Flow - dmn3/s
300
140
350
160
400
180
450
200
Specifications
Weight
Aluminum Bowl (E)........................................8.3 lb. (3.76 kg) / Unit
33.2 lb. (15.06 kg) / 4-Unit Master Pack
Aluminum Bowl with
Polycarbonate Sight Gauge (G).....................10 lb. (4.54 kg) / Unit
40 lb. (18.14 kg) / 4-Unit Master Pack Zinc Bowl with
Nylon Sight Gauge (W)................................. 7.5 lb. (3.40 kg) / Unit
28.2 lb. (12.79 kg) / 4-Unit Master Pack
Materials of Construction
Bowl Capacity
Aluminum (E) .................................................................32 Ounces
Aluminum with Polycarbonate Sight Gauge (G) ...........64 Ounces
Zinc with Nylon Sight Gauge (W) .................................. 16 Ounces
Body .............................................................................................Zinc
Bowls
(E)..................................................................................... Aluminum
(G)............................... Aluminum with Polycarbonate Sight Gauge
(W)..................................................... Zinc with Nylon Sight Gauge
Seals ....................................................................................... Buna N
C135
Filter /
Regulators
L606-12G
25
Lubricators
.2
10.3
Combos
Accessories
.3
1.7
Filters
09L Series
2" Basic 2" Body
Catalog 0700P-E
F
D
Product
Selection
A
C
PRESS
TURN
E
B
Filters
Coalescers
Port Size
NPT
Regulators
Filter /
Regulators
5.50
(140)
10.40
(264)
2.64
(67)
13.04
(331)
5.50
(140)
9.44
(240)
2.64
(67)
6.00
(152)
12.08
(307)
09L84B*
2"
Metal Bowl / Sight Gauge 3 Quart
09L8PB*
2"
3 Qt.
7.12
(181)
Inches (mm)
SCFM = Standard Cubic Feet Per Minute at 900 psig Inlet, and 5 psig
Pressure Drop.
Lubricators
Combos
Ordering Information
Accessories
09L
Port Size
8 2 Inch
Bowl Options
Metal Bowl
4 1 Quart
Sight Gauge /
Manual Drain
P 3 Quart
Sight Gauge /
Manual Drain
Options
B Without Tamperproof
Cap
Engineering
Level
Port Type
Blank NPT
* Will be
Entered at
Factory
C136
09L Series
Air Line Mist Lubricators
Catalog 0700P-E
.2
.1
Product
Selection
.3
200
100
400
800
600
1000
Flow - SCFM
200
300
400
500
1200
1400
600
Filters
Flow Characteristics
09L8PB* 2 Inch Ports
1400
700
Coalescers
Flow - dm /s
Specifications
Oil 1 Gal..............................................................................F442002
12 Quart Case...............................................................F442003
4 Gallon Case...............................................................F442005
Materials of Construction
Body ....................................................................Zinc Alloy, Die Cast
C137
Accessories
Combos
Lubricators
Filter /
Regulators
Regulators
Prep-Air II
Air Line Accessories
Catalog 0700P-E
Product
Selection
Filters
AIR
Dimensions
PLY
SUP
Coalescers
Model
Kit Number
06L-16L
PS505CP
5.36 (136)
07L-17L
PS505CP
6.71 (170)
Inches (mm)
OIL
SUPPLY
Regulators
Operation
Filter /
Regulators
Oil enters the unit at the pipe thread fitting (A) with a supply pressure that is a minimum of
20 psig above the lubricator air pressure. With the float lowered, oil flows through metering
orifice (B) and lifts the check ball (C). Oil continues to flow past the shuttle chamber
annulus (D) and out the cross drilled hole (E). As the oil level rises, it cause the float to rise
to its maximum level in the bowl. During this period the shut-off ball (F) remains in chamber
(G), out of the flow stream. Near the end of the filling period, shut-off ball (F) will enter the
flow stream and snap shut against the seat in chamber (G).
Lubricators
Combos
G
C
B
A
F
D
The stem assembly will thus block any additional oil passage as long as the oil supply
pressure is maintained at (A). When the supply pressure at (A) is released, ball (C) is held
up against the shuttle (D) by a spring causing a slight delay in reverse flow shut-off. This
permits the higher still present supply pressure in chamber (G) to dissipate and bowl
pressure to take over. The shuttle then moves down forcing ball (C) to close orifice (B).
The orifice will remain closed as long as there is air pressure in the bowl.
Accessories
This delay of reverse flow in chamber (G) is necessary to allow shut-off ball (F) to fall when
the oil level decreases and permit oil to enter the bowl for the next refill. Thus, for the unit to
operate properly, it is necessary that the oil supply pressure go to zero after each fill.
Specifications
Materials of Construction
Body, Cap & Stem............................................................... Aluminum
Float................................................................................ Polyurethane
Mounting Nut.............................................................................Delrin
Seals........................................................................................... Nitrile
Spring....................................................................................Stainless
C138
Lubricators
Filter /
Regulators
Regulators
Coalescers
Filters
Product
Selection
Combos
Notes
Prep-Air II
Air Line Accessories
Accessories
Catalog 0700P-E
C139
Catalog 0700P-E
14 Miniature Series
2 & 3-Unit Close Nippled Combinations
Two-Unit
Combo
A
Product
Selection
Filters
Coalescers
Series
Regulators
14G
Port
Model Numbers
1/8"
14G01B13F0G*
1/4"
14G11B13F0G*
A
3.75
(95)
b
3.79
(96)
C
2.42
(61)
D
2.04
(52)
E
6.21
(158)
f
0.79
(20)
Inches (mm)
Note: All dimensions nominal.
Filter /
Regulators
Lubricators
Three-Unit
Combo
A
Combos
Accessories
Series
14A
Port
Model Numbers
1/8"
14A01B13F0G*
1/4"
14A11B13F0G*
A
5.77
(147)
b
3.82
(97)
C
2.16
(55)
D
2.04
(52)
E
5.98
(152)
f
0.79
(20)
Inches (mm)
Note: All dimensions nominal.
C140
14 Miniature Series
2 & 3-Unit Close Nippled Combinations
Catalog 0700P-E
Metal Bowl
3 Twist Drain
7 Automatic Pulse
Drain
Engineering
Level
Lubricator Bowl
Options
Without Gauge
10 30 psig
11 60 psig
12 15 psig
13 125 psig
With Gauge
15 30 psig
16 60 psig
17 15 psig
18 125 psig
* Will be
Entered at
Factory
Poly Bowl
0 No Drain
1 Twist Drain
Metal Bowl
3 Twist Drain
Lubricator Body
Options
G No Fill Plug
Relief
Filter Element
F Relieving
G Non-Relieving
A 40 Micron
B 5 Micron
CAUTION:
REGULATOR PRESSURE ADJUSTMENT The working range
of knob adjustment is designed to permit outlet pressures within
their full range. Pressure adjustment beyond this range is also
possible because the knob is not a limiting device. This is a common
characteristic of most industrial regulators, and limiting devices may
be obtained only by special design.
G
H
K Typ.
K Typ.
J
H
M
L
PS419
PS417BP
Dimensions
E
F
Accessories
For polycarbonate bowl and sight dome, see Caution on page C2.
E
F
WARNING
Kit
1.80
(46)
2.37
(60)
0.90
(23)
1.35
(34)
1.00
(25)
0.50
(13)
0.20
(5)
1.24
(31)
0.56
(14)
0.22
(6)
0.45
(11)
0.62
(16)
PS417BP
1.80
(46)
2.17
(55)
0.90
(23)
1.35
(34)
1.00
(25)
0.50
(13)
0.20
(5)
1.24
(31)
0.56
(14)
0.22
(6)
0.45
(11)
0.62
(16)
PS419
(04L)
Inches (mm)
C141
C
Product
Selection
Regulators
Port Size
Regulator
Pressure
Poly Bowl
1 Twist Drain
5 Automatic Pulse
Drain
0 1/8 Inch
1 1/4 Inch
Filters
14A 3-Unit
14G 2-Unit
13
Coalescers
Filter /
Regulators
Lubricators
Series
Combos
14A
Catalog 0700P-E
Two-Unit
Combo
Product
Selection
Filters
Coalescers
Series
Regulators
15G
Port
Model Numbers
1/4"
15G12A13A2N*
3/8"
15G22A13A2N*
A
4.49
(114)
b
5.35
(136)
C
3.16
(80)
D
2.05
(52)
E
8.50
(216)
f
1.03
(26)
Inches (mm)
Note: All dimensions nominal.
Filter /
Regulators
Lubricators
Three-Unit
Combo
Combos
Accessories
E
B
Series
15A
Port
Model Numbers
1/4"
15A12A13A2N*
3/8"
15A22A13A2N*
A
7.00
(178)
b
5.35
(136)
C
2.24
(57)
D
2.05
(52)
E
7.59
(193)
f
1.03
(26)
Inches (mm)
Note: All dimensions nominal.
C142
Catalog 0700P-E
Without Gauge
11 60 psig
13 125 psig
14 200 psig
With Gauge *
16 60 psig
18 125 psig
19 200 psig
* Will be
Entered at
Factory
Relief
A Relieving
L Non-Relieving
Lubricator Body
Options
B With Fill Plug
F With Body
Pressure Fill
N No Fill Plug
CAUTION:
Regulators
Filter Element
A 40 Micron
B 5 Micron
Engineering
Level
Lubricators
1 1/4 Inch
2 3/8 Inch
Product
Selection
Filters
Coalescers
13
Regulator
Pressure
Port Size
Series
15A 3-Unit
15G 2-Unit
Filter /
Regulators
WARNING
For polycarbonate bowl and sight dome, see Caution on page C2.
C143
Combos
Accessories
15A
Catalog 0700P-E
Two-Unit
Combo
A1
J
A
(Without
Port Blocks)
Product
Selection
C
H
G
E
Filters
.280 x .430
(7mm x 11mm)
Slot
Coalescers
Series
Regulators
15H
Port
Model Numbers
1/4"
15H12A13A2N*
3/8"
15H22A13A2N*
A
4.33
(110)
A1
6.38
(162)
B
5.35
(136)
G
2.60
(66)
H
1.14
(29)
J
4.72
(120)
C
3.15
(80)
D
2.05
(52)
E
8.50
(216)
F
1.45
(37)
Filter /
Regulators
Inches (mm)
All dimensions nominal.
Mounting brackets not included.
Lubricators
Three-Unit
Combo
A1
A
(Without Port Blocks)
J
Combos
Accessories
G
E
B
Series
15B
Port
Model Numbers
1/4"
15B12A13A2N*
3/8"
15B22A13A2N*
.280 x .430
(7mm x 11mm)
Slot
A
6.70
(170)
A1
8.72
(222)
B
5.35
(136)
G
2.60
(66)
H
1.14
(29)
J
2.35
(600)
C
2.24
(57)
D
2.05
(52)
E
7.59
(193)
Inches (mm)
All dimensions nominal.
Mounting brackets not included.
C144
F
1.45
(37)
Catalog 0700P-E
Relief
Engineering
Level
A Relieving
L Non-Relieving
* Will be
Entered at
Factory
Lubricator Body
Options
Poly Bowl
2 Metal Bowl Guard /
Twist Drain
P Metal Bowl Guard /
Automatic Pulse Drain
Metal Bowl
3 Twist Drain
4 Sight Gauge /
Twist Drain
R Automatic Pulse Drain
T Sight Gauge /
Automatic Pulse Drain
Regulator
Pressure
Without Gauge
11 60 psig
13 125 psig
14 200 psig
With Wall
Mounting
Bracket &
Port Block
With Mounting
Bracket,
Lockout &
Port Block
G With Port
Blocks
Poly Bowl
2 Metal Bowl Guard /
No Drain
6 Metal Bowl Guard /
Pressure Fill
Metal Bowl / Sight Gauge
4 Twist Drain
8 Pressure Fill
Blank No Port
Blocks
C With Mounting
Bracket &
Lockout
With Gauge *
16 60 psig
18 125 psig
19 200 psig
Modular Options
J With Lockout
(No Port
Blocks)
K With Lockout
and Port
Blocks
W With Mounting
Bracket
CAUTION:
Lubricators
Product
Selection
Filters
Coalescers
A 40 Micron
B 5 Micron
Regulators
13
Filter Element
1 1/4 Inch
2 3/8 Inch
15B 3-Unit
15H 2-Unit
Filter /
Regulators
Port Size
Series
WARNING
For polycarbonate bowl and sight dome, see Caution on page C2.
3/8"
C145
Combos
Accessories
15B
Catalog 0700P-E
Part Numbers
C
Product
Selection
Filters
Coalescers
Regulators
Filter /
Regulators
1/8"
1/4" 3/8"
NPT.........PS95000P.........PS95001P.........PS95002P
Lubricators
Body Connectors
Combos
PS954P
Accessories
C146
Catalog 0700P-E
Part Numbers
PS955P
PS95701P
1.65 (42)
Dia.Thru
2 Places
.85
(22)
2.28
(58)
2.87 1.14
(73) (29)
1.06
(27)
2.09 1.17
(53) (30)
.58
(15)
3.15
(80)
1/4" Port
1.38
(35)
1.13
(29)
.83
(21)
.43 (11)
Typ.
.22 (6)
Typ.
1/4" Port
.56
(14)
Regulators
C
Product
Selection
1.41
(36)
1.65
(42)
.63
(16)
Filters
.28 (7)
Typ.
1/4" Port
.28
(7)
Coalescers
.14 (4)
Typ.
.63
(16)
.31
(8)
Filter /
Regulators
Lockout Valve
1/4" Port
Lubricators
PS95601P
1.65
(42)
1.06
(27)
Combos
2.09
(53)
.83
(21)
Accessories
1.93
(49)
.56
(14)
C147
Catalog 0700P-E
Two-Unit
Combo
Product
Selection
Filters
Series
Coalescers
06G
Regulators
07G
Model
Numbers
Port
Model
Numbers
06G12A13A2B*
1/4"
16G12A13A2B*
06G22A13A2B*
3/8"
16G22A13A2B*
06G32A13A2B*
1/2"
16G32A13A2B*
07G32A13A2B*
1/2"
17G32A13A2B*
07G42A13A2B*
3/4"
17G42A13A2B*
Series
16G
A
6.13
(156)
b
5.69
(145)
A
6.99
(178)
b
6.97
(177)
C
4.69
(119)
D
3.18
(81)
E
10.38
(264)
f
1.37
(35)
E
11.76
(299)
f
1.63
(41)
17G
C
4.79
(122)
D
3.44
(87)
Filter /
Regulators
Inches (mm)
All dimensions nominal.
Lubricators
Three-Unit
Combo
A
Combos
Accessories
Series
06A
07A
Model
Numbers
Port
Model
Numbers
06A12A13A2B*
1/4"
16A12A13A2B*
06A22A13A2B*
3/8"
16A22A13A2B*
06A32A13A2B*
1/2"
16A32A13A2B*
07A32A13A2B*
1/2"
17A32A13A2B*
07A42A13A2B*
3/4"
17A42A13A2B*
Series
A
9.45
(240)
16A
b
5.69
(145)
C
2.24
(57)
D
3.18
(81)
E
7.93
(201)
f
1.37
(35)
E
9.38
(238)
f
1.63
(41)
17A
b
6.97
(177)
C
2.41
(61)
D
3.44
(87)
Inches (mm)
All dimensions nominal.
C148
Catalog 0700P-E
Filter Element
3
4
7
8
Relief
A 40 Micron
B 5 Micron
A Relieving
L Non-Relieving
Lubricator Body
Options
Engineering
Level
* Will be
Entered at
Factory
Poly Bowl
Metal Bowl Guard / Twist Drain
Metal Bowl Guard /
Automatic Float Drain
Metal Bowl
Twist Drain
Sight Gauge / Twist Drain
Automatic Float Drain
Sight Gauge /
Automatic Float Drain
Regulator
Pressure
Without Gauge
11 60 psig
13 125 psig
15* 250 psig
With Gauge
16 60 psig
18 125 psig
21* 250 psig
2
6
K
N
Poly Bowl
Metal Bowl Guard / No Drain
Metal Bowl Guard / Pressure Fill
Metal Bowl Guard / Auto Fill
Metal Bowl Guard / Twist Drain
Combos
CAUTION:
Filters
* Available on
06/16 Series
only.
** Available on
07/17 Series
only.
Product
Selection
1 1/4 Inch
2 3/8 Inch*
3 1/2 Inch
4 3/4 Inch**
Coalescers
13
Regulators
06A
07A
06G
07G
Micro-Mist
Compact 3-Unit
Standard 3-Unit
Compact 2-Unit
Standard 2-Unit
Mist
Compact 3-Unit
Standard 3-Unit
Compact 2-Unit
Standard 2-Unit
Lubricators
16A
17A
16G
17G
Port Size
Filter /
Regulators
Series
WARNING
For polycarbonate bowl and sight dome, see Caution on page C2.
C149
Accessories
16A
Catalog 0700P-E
Two-Unit
Combo
A1
J
A
H
G
Product
Selection
.280 x .500
(7mm x 13mm)
Slot
Filters
Coalescers
Regulators
Series
Model
Numbers
Port
Model
Numbers
06H12A13A2B*
1/4"
16H12A13A2B*
06H
06H22A13A2B*
3/8"
16H22A13A2B*
06H32A13A2B*G
1/2"
16H32A13A2B*G
07H32A13A2B*
1/2"
17H32A13A2B*
07H42A13A2B*
3/4"
17H42A13A2B*
07H
Series
16H
17H
Filter /
Regulators
A
6.10
(155)
f
2.00
(51)
a1
9.04
(230)
G
3.58
(91)
A
7.00
(178)
F
2.09
(53)
a1
10.28
(261)
G
3.58
(91)
b
C
5.69
4.69
(145)
(119)
H
J
1.40
6.65
(36)
(169)
07H, 17H Series
C
b
6.97
4.79
(177)
(122)
H
J
1.40
7.51
(36)
(191)
D
3.18
(81)
E
10.38
(264)
D
3.44
(87)
E
11.76
(299)
Inches (mm)
All dimensions nominal.
Lubricators
Three-Unit
Combo
A1
A
(Without Port Blocks)
J
Combos
G
E
B
Accessories
.280 x .500
(7mm x 13mm)
Slot
Series
Model
Numbers
Port
Model
Numbers
06B12A13A2B*
1/4"
16B12A13A2B*
06B
06B22A13A2B*
3/8"
16B22A13A2B*
06B32A13A2B*G
1/2"
16B32A13A2B*G
07B32A13A2B*
1/2"
17B32A13A2B*
07B42A13A2B*
3/4"
17B42A13A2B*
07B
Series
A
9.46
(240)
f
2.00
(51)
a1
12.39
(315)
G
3.58
(91)
A
10.750
(273)
F
2.18
(55)
a1
14.03
(356)
G
3.58
(91)
16B
17B
b
C
5.69
2.24
(145)
(57)
H
J
1.40
3.33
(36)
(85)
07B, 17B Series
b
C
6.97
2.41
(177)
(61)
H
J
1.40
3.76
(36)
(95)
D
3.18
(81)
E
7.93
(202)
D
3.44
(87)
E
9.38
(238)
Inches (mm)
All dimensions nominal.
C150
Catalog 0700P-E
Poly Bowl
Metal Bowl Guard / Twist Drain
Metal Bowl Guard /
Automatic Float Drain
Metal Bowl
Twist Drain
Sight Gauge / Twist Drain
Automatic Float Drain
Sight Gauge /
Automatic Float Drain
Engineering
Level
A Relieving
L Non-Relieving
* Will be
Entered at
Factory
Lubricator Body
Options
B With Fill Plug
F With Body
Pressure Fill
Regulator
Pressure
Without Gauge
11 60 psig
13 125 psig
15* 250 psig
With Gauge
16 60 psig
18 125 psig
21* 250 psig
2
6
K
N
Poly Bowl
Metal Bowl Guard / No Drain
Metal Bowl Guard / Pressure Fill
Metal Bowl Guard / Auto Fill
Metal Bowl Guard / Twist Drain
Modular Options
Blank No Port
Blocks
A
With Wall
Mounting
Bracket &
Port Block
With Mounting
Bracket,
Lockout &
Port Block
C* With Mounting
Bracket &
Lockout
G With Port
Blocks
J With Lockout
(No Port
Blocks)
K With Lockout
and Port
Blocks
W With Mounting
Bracket
* 06/16 series 1/2" units
not available with option
C. Use option B.
CAUTION:
REGULATOR PRESSURE ADJUSTMENT The working range
of knob adjustment is designed to permit outlet pressures within
their full range. Pressure adjustment beyond this range is also
possible because the knob is not a limiting device. This is a
common characteristic of most industrial regulators, and limiting
devices may be obtained only by special design.
For best performance, regulated pressure should always be set
by increasing the pressure up to the desired setting.
WARNING
Size
NPT BSPP
BSPT
07 Series
1/4"...........PS850P.......PS865P....... PS861P
3/8"...........PS851P.......PS866P....... PS862P
C151
C
Product
Selection
Relief
Filters
Coalescers
Regulators
A 40 Micron
B 5 Micron
3
4
7
8
Filter Element
with Port
Blocks only.
2
6
13
Filter /
Regulators
06B
07B
06H
07H
1 1/4 Inch*
Micro-Mist
Compact 3-Unit 2 3/8 Inch
Standard 3-Unit 3 1/2 Inch***
Compact 2-Unit 4 3/4 Inch**
Standard 2-Unit * Available on
06/16 Series
Mist
only.
Compact 3-Unit
** Available on
Standard 3-Unit
07/17 Series
Compact 2-Unit
only.
Standard 2-Unit *** 06/16 available
Lubricators
16B
17B
16H
17H
Port Size
Combos
Series
Accessories
16B
Catalog 0700P-E
Part Numbers
C
Product
Selection
Filters
Coalescers
Regulators
Size
NPT BSPP
BSPT
Filter /
Regulators
Body Connectors
Lubricators
06Series..........PS754P
07Series..........PS854P
07 Series
Combos
Accessories
Port Block
Connectors allow
you to make threaded
port connections to Modular units
and are available in various port sizes
to match your system requirements.
Each Kit includes all the necessary pieces to
make two port connections.
C152
Catalog 0700P-E
Part Numbers
.26 (7)
Dia.
Product
Selection
1.38
(35)
3.58
(91)
.50 (13)
Typ.
1.00
(25)
2.00
(50)
.75
(19)
2.00
(50)
Filters
.75
(19)
4.08
(104)
1.40
(35)
.25 (6)
Typ.
1.00
(25)
1.50
(38) .75
(19)
PS757P
3/8" Port
Top & Bottom
1.00
(25)
2.00
(51)
1/2" Port
Top & Bottom
1.00
(25)
PS857P
Lockout Valves
IN
2.81
(71)
Combos
1.40
(36)
Lubricators
Coalescers
.14 (4)
Typ.
.375 .005
.500 .005
.28 (7)
Typ.
.350 .005
Regulators
.13
(3)
1.65
(42)
.70
(18)
Filter /
Regulators
.25
(6)
1.00
(25)
OUT
1.88
(48)
1.34
(34)
2.67
(68)
Accessories
3.08
(78)
1.20 (31)
Slide
Travel
.31 (2.4) Dia.
Lockout
Hole
C153
Catalog 0700P-E
Two-Unit
Combo
Product
Selection
Relieving Regulator
125 PSI (8.6 bar)
Coalescers
Regulators
Model Numbers
3/4"
P3N3A96SGMNNLNA
1"
P3N3A98SGMNNLNA
7.76
(197)
9.57
(243)
6.38
(162)
3.56
(90)
15.95
(405)
1.81
(50)
1-1/2"
P3N3A9PSGMNNLNA
Series
Port
P3N3A
Notes: All Combo part numbers are with regulator knob in up position.
1" Port Body with 1-1/2" Port Block.
For other models, refer to Ordering Information on next page.
Inches (mm)
All dimensions nominal.
Mounting brackets not included (change last character in model
number to B if required).
Gauges not included (change 12th character to G if required).
Filter /
Regulators
Lubricators
Three-Unit
Combo
Combos
Accessories
Port
3/4"
P3N3B
Model Numbers
P3N3B96SGMNNLNA
11.89
(302)
9.57
(243)
6.38
(162)
3.56
(90)
15.95
(405)
1.81
(50)
1"
P3N3B98SGMNNLNA
1-1/2"
P3N3B9PSGMNNLNA
Notes: All Combo part numbers are with regulator knob in up position.
1" Port Body with 1-1/2" Port Block.
For other models, refer to Ordering Information on next page.
Inches (mm)
All dimensions nominal.
Mounting brackets not included (change last character in model
number to B if required).
Gauges not included (change 12th character to G if required).
C154
Catalog 0700P-E
P3N
3 a
Series
Filter
Elements
Mounting
Options
Relief
N Relieving
M Non Relieving
E 5 Micron
G 40 Micron
A No Brackets
or Kits
B Wall Bracket
C
Product
Selection
Type
3 Combinations w/
Pipe Nipples
Filter Drains
Lubricator Type
M Twist Drain
A Automatic Float Drain
Oil Mist
L w/ Polycarbonate
Sight Dome
A w/ Nylon Sight Dome
CAUTION:
REGULATOR PRESSURE ADJUSTMENT The working
range of knob adjustment is designed to permit outlet
pressures within their full range. Pressure adjustment beyond
this range is also possible because the knob is not a limiting
device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by
special design.
WARNING
C155
Coalescers
N No Drain,
Solid Bowl / Fill Plug
M Manual Twist Drain /
Fill Plug
A Automatic Fill /
Fill Plug
S Bowl Pressure Fill /
Fill Plug
H No Drain / Body
Pressure Fill
J Manual Twist Drain /
Body Pressure Fill
Regulators
Without Gauge
L 60 PSI (0 to 4 bar)
N 125 PSI (0 to 8 bar)
H 250 PSI (0 to 17 bar)
With Gauge
M 60 PSI (0 to 4 bar)
G 125 PSI (0 to 8 bar)
J 250 PSI (0 to 17 bar)
Filter /
Regulators
Port Size
6 3/4" (w/o Port Blocks)
8 1" (w/o Port Blocks)
P 1-1/2" Port Blocks
(w/ 1" Ported Body)
Lubricator
Drain / Fill Devices
Lubricators
Port Type
9 NPT Female
Regulator Pressure
Range & Gauges
Combos
Bowl
S Metal Bowl
w/ Sight
Gauge
Accessories
Metal Bowl
A Hi-Flow 2-Unit
B Hi-Flow 3-Unit
Filters
Combination
Catalog 0700P-E
Two-Unit
Combo
A2
(w/ Mtg Brkts,
w/o Port Blocks)
B2
(w/ Mtg Brkts)
B1
A1 (Port Blocks)
A
Product
Selection
Filters
Relieving Regulator
125 PSI (8.6 bar)
Coalescers
Series
P3NCA
Port
Model Numbers
3/4"
P3NCA96SGMNNLNA
P3NCA98SGMNNLNA
1"
Regulators
1-1/2"
P3NCA9PSGMNNLNA
Notes: All Combo part numbers are with regulator knob in up position.
A
7.24
(184)
A1
9.53
(242)
A2
9.84
(250)
C
6.38
(162)
D
9.57
(243)
E
15.95
(405)
A3
12.13
(308)
B
3.62
(92)
B1
5.20
(132)
B2
5.74
(146)
Filter /
Regulators
Inches (mm)
All dimensions nominal.
Mounting brackets not included (change last character in model
number to B if required).
Gauges not included (change 12th character to G if required).
Lubricators
Three-Unit
Combo
A2
(w/ Mtg Brkts,
w/o Port Blocks)
B2
(w/ Mtg Brkts)
B1
A1 (Port Blocks)
A
Combos
Relieving Regulator
125 PSI (8.6 bar)
Series
P3NCB
Port
Model Numbers
3/4"
P3NCB96SGMNNLNA
1"
P3NCB98SGMNNLNA
1-1/2"
P3NCB9PSGMNNLNA
Notes: All Combo part numbers are with regulator knob in up position.
1" Port Body with 1-1/2" Port Block.
For other models, refer to Ordering Information on next page.
A
10.87
(276)
A1
13.15
(334)
A2
13.46
(342)
C
6.38
(162)
D
9.57
(243)
E
15.95
(405)
A3
15.75
(400)
B
3.62
(92)
B1
5.20
(132)
B2
5.74
(146)
Inches (mm)
All dimensions nominal.
Mounting brackets not included (change last character in model
number to B if required).
Gauges not included (change 12th character to G if required).
C156
Catalog 0700P-E
P3N
C a
Series
Filter
Elements
Mounting
Options
Relief
N Relieving
M Non Relieving
E 5 Micron
G 40 Micron
A No Brackets
or Kits
B Wall Mounting
Bracket
C
Product
Selection
Type
C Combination -
Modular
Filter Drains
Lubricator Type
M Twist Drain
A Automatic Float Drain
Oil Mist
L w/ Polycarbonate
Sight Dome
A w/ Nylon Sight Dome
CAUTION:
REGULATOR PRESSURE ADJUSTMENT The working
range of knob adjustment is designed to permit outlet
pressures within their full range. Pressure adjustment beyond
this range is also possible because the knob is not a limiting
device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by
special design.
WARNING
C157
Coalescers
N No Drain,
Solid Bowl / Fill Plug
M Manual Twist Drain /
Fill Plug
A Automatic Fill /
Fill Plug
S Bowl Pressure Fill /
Fill Plug
H No Drain / Body
Pressure Fill
J Manual Twist Drain /
Body Pressure Fill
Regulators
Without Gauge
L 60 PSI (0 to 4 bar)
N 125 PSI (0 to 8 bar)
H 250 PSI (0 to 17 bar)
With Gauge
M 60 PSI (0 to 4 bar)
G 125 PSI (0 to 8 bar)
J 250 PSI (0 to 17 bar)
Filter /
Regulators
Port Size
6 3/4" (w/o Port Blocks)
8 1" (w/o Port Blocks)
H 3/4" Port Blocks
(w/ 3/4" Ported Body)
M 1" Port Blocks
(w/ 1" Ported Body)
P 1-1/2" Port Blocks
(w/ 1" Ported Body)
Lubricator
Drain / Fill Devices
Lubricators
Port Type
1 G Thread
(BSPP) Female
9 NPT Female
Regulator Pressure
Range & Gauges
Combos
Bowl
S Metal Bowl
w/ Sight
Gauge
Accessories
Metal Bowl
A Hi-Flow 2-Unit
B Hi-Flow 3-Unit
Filters
Combination
Catalog 0700P-E
Part Numbers
OIL
Product
Selection
Filters
Coalescers
Mounting Brackets
Regulators
P3NKA00MW
For 1-1/2" BSPP Port Block with E02 fitting application, use
Mounting Bracket Kit P3NKA0BMW
Filter /
Regulators
3/4"
1" 1-1/2"
Lubricators
P3NKB96CP........P3NKB98CP.........P3NKB9BCP
Combos
BSPP P3NKB16CP*.......P3NKB18CP*........P3NKB1BCP*
P3NKA00PM
Accessories
NPT
P3NKB96CL........P3NKB98CL.........P3NKB9BCL
BSPP P3NKB16CL*.......P3NKB18CL*........P3NKB1BCL*
Port Block Kits allow units to be installed or removed as
modular components.
Each Kit includes all the necessary pieces to make two port
connections.
*
C158
C628 Series
Standard Combinations
Catalog 0700P-E
Three-Unit Combo
F
3 2 1 0 9
7 6 5 4 3
Product
Selection
15.75
(400)
7.75
(197)
13.00
(330)
2.48
(63)
C628-06FRL, C628-08FRL
C628
Port
Model Numbers
3/4"
C628-06FRLWJCW
1"
C628-08FRLWJCW
1-1/4"
C628-10FRLWJCW
1-1/2"
C628-12FRLWJCW
2.63
(67)
3.52
(89)
C628-10FRL, C628-12FRL
16.50
(419)
8.13
(206)
2.84
(72)
3.86
(98)
14.13
(359)
2.64
(67)
Inches (mm)
All dimensions nominal.
Filter /
Regulators
Series
628
06 FRL
Port Size
Elements
06 3/4 Inch
08 1 Inch
10 1-1/4 Inch
12 1-1/2 Inch
G 5 Micron
J 40 Micron
Regulator
Reduced
Pressure Range
Lubricators
Ordering Information
C 0-125 psig
D 0-250 psig
H
K
Q
R
X9
CAUTION:
REGULATOR PRESSURE ADJUSTMENT The working range
of knob adjustment is designed to permit outlet pressures within
their full range. Pressure adjustment beyond this range is also
possible because the knob is not a limiting device. This is a common
characteristic of most industrial regulators, and limiting devices may
be obtained only by special design.
For best performance, regulated pressure should always be set by
increasing the pressure up to the desired setting.
C159
Regulators
WARNING
Combos
Accessories
Coalescers
Filters
Catalog 0700P-E
Features
For Solenoid
Operated Valves
3
1
For Externally
Piloted Valves
3
1
Operation
Product
Selection
Filters
Coalescers
Regulators
Filter /
Regulators
Lubricators
Combos
Ordering Information
Accessories
05S
XX
Port Size
Operator / Voltage
2 3/8 Inch
XX Air Pilot
XP Air Pilot with
Prestolok
30-145 PSI
49 24VDC
53 120VAC
*
Engineering
Level
* Will be
Entered at
Factory
Note:
BSPP Available with Port Blocks Only,
Meets ISO 1179-1 Standard.
C160
Catalog 0700P-E
60
150
65
5
4
3
2
1
0
20
40
Flow (SCFM)
Series
Flow Cv
Exhaust Flow Cv
05S
1.3
1.6
60
Dimensions
Model
Port
Size
05S
3/8"
5.26
(134)
2.13
(54)
2.10
(53)
3.86
(98)
1.65
(42)
Adjustment
Needle
Screwdriver
Slot
Inches (mm)
A
IN
OUT D
Specifications
2.3mm
Top of light
21mm
15mm
1
22 AWG Wire
PS2946J79P
Air Pilot 60 to 150 psig (4.1 to 10.3 bar)
32F to 160F (0C to 70C)
Air Pilot with Prestolok Adaptor 60 to 150 psig (4.1 to 10.3 bar)
32F to 150F (0C to 65C)
Lubricators
EXH
C
B
Materials of Construction
Body.................................................................................... Aluminum
Seals..........................................................................................Nitrile
Slide Rings ......................................... Lubricant Filled Thermoplastic
Springs ....................................................................... Stainless Steel
C161
C
Product
Selection
55
125
Filters
100
Coalescers
50
Regulators
75
Filter /
Regulators
Combos
10
Accessories
Catalog 0700P-E
Features
Combines Soft Start and
Quick Dump Valve
in the same body
Adjustment
Needle
For Solenoid
Operated Valves
3
1
C
C
12
Product
Selection
For Externally
Piloted Valves
Filters
3
1
E
A
06S
07S
Coalescers
Dimensions:
Regulators
06S
07S
Filter /
Regulators
Lubricators
Combos
Accessories
Series
06S
07S
06S
3/8"
3.36
(85)
5.40
(137)
2.07
(53)
2.08
(53)
1.68
(43)
2.17
(55)
07S
1/2"
3.81
(96)
5.96
(151)
2.07
(53)
2.74
(70)
1.91
(48)
2.54
(65)
Operator / Voltage
49
53
69
73
MD
BOLD ITEMS ARE MOST POPULAR.
53
Port Size
2 3/8 Inch (06S)
3 1/2 Inch (07S)
06S
Port
Size
Inches (mm)
Operation
Ordering Information
Model
30-145 PSI
24VDC*
120/60 Hz*
145-200 PSI
24VDC**
120/60 Hz**
M12 Male Connector,
4 Pole; 24VDC
Engineering
Level
* Will be
Entered at
Factory
Thread
Type / Label
Blank NPT
1* BSPP (G)
* 3/8 & 1/2 inch meet
ISO 1179-1 Standard.
C162
Catalog 0700P-E
06S
07S
07S
75
55
52
100
67
68
125
80
82
60
Flow (SCFM)
80
100
120
4.1
3.4
07S
5.7
4.6
40.5mm
30mm
Connector
Connector
with 6' (2m) Cord
Description
PS2429BP
PS2429JBP
Unlighted
PS243079BP
PS2430J79BP*
Light 24VDC
PS243083BP
PS2430J83BP*
Light 120V/60Hz
Note: Max 6.5mm cable size required for connector w/o 6' (2m) cord.
IP65 rated when properly installed.
Engineering Data:
Conductors: 2 Poles Plus Ground; Cable Range (Connector Only):
6 to 8mm (0.24 to 0.31 Inch); Contact Spacing: 11mm
Specifications
Exhaust Ports
06S ............................................................................................1/2 Inch
07S . ...........................................................................................3/4 Inch
Maximum Pressure
Standard Coil .................................................. 145 psig (10.0 bar)
High Pressure Coil . ........................................ 200 psig (13.8 bar)
Minimum Operating Pressure ............................... 30 psig (2.1 bar)
Temperature Ratings ........................... 40F to 120F (4C to 49C)
Weight
06S . ....................................................................2.25 lbs. (1.02 kg)
07S ...................................................................... 3.75 lbs. (1.70 kg)
27mm
Materials of Construction
30mm
18mm
Body.................................................................................... Aluminum
30mm
Connections
Description
ISO 20401
PS2028JBP
Unlighted
PS203279BP
PS2032J79BP*
Light 24VDC
Pin Number
PS203283BP
PS2032J83BP*
Light 120V/60Hz
Note: Max 6.5mm cable size required for connector w/o 6' (2m) cord.
IP65 rated when properly installed.
Engineering Data:
Conductors: 2 Poles Plus Ground; Cable Range (Connector Only):
8 to 10mm (0.31 to 0.39 Inch); Contact Spacing: 18mm
Color
Supply
Brown
White
0V (GND)
Supply
Blue
24V
Alarm Output
Signal
Black
C163
24V
Function
4-PIN MICRO
(TOP COVER)
1
BLK
PS2028BP
BLUE
Connector
with 6' (2m) Cord
BRN
Connector
WHT
42mm
Coalescers
30mm
Filters
Regulators
40
06S
Filter /
Regulators
20
Exhaust Flow Cv
Lubricators
Flow Cv
Product
Selection
Series
06S
Combos
Accessories
Catalog 0700P-E
E
C
E
G
G
Solenoid operation
Non-locking manual override
Product
Selection
B
1
Filters
2
3
06T
07T
Coalescers
Dimensions:
Regulators
Model
Port
Size
06T
3/8"
07T
1/2"
2.17
(26)
1.04
(43)
1.68
(43)
2.07
(53)
1.90
(48)
1.37
(35)
1.91
(48)
2.07
(53)
1.90
(48)
Inches (mm)
Filter /
Regulators
06T
07T
Operation
Lubricators
Combos
Accessories
Ordering Information
Series
06T
07T
Solenoid Quick
Dump Valve
Solenoid Quick
Dump Valve
06T
Operator / Voltage
49
53
69
73
MD
BOLD ITEMS ARE MOST POPULAR.
53
Port Size
2 3/8 Inch (06T)
3 1/2 Inch (07T)
30-145 PSI
24VDC*
120/60 Hz*
145-200 PSI
24VDC**
120/60 Hz**
M12 Male Connector,
4 Pole; 24VDC
Engineering
Level
* Will be
Entered at
Factory
Thread
Type / Label
Blank NPT
1* BSPP (G)
* 3/8 & 1/2 inch meet
ISO 1179-1 Standard.
C164
Performance Characteristics
Catalog 0700P-E
Flow Cv
Exhaust Flow Cv
06T
3.7
4.1
07T
5.5
5.0
06T
2
07T
100
120
30mm
22mm
11mm
40.5mm
30mm
Connector
Connector
with 6' (2m) Cord
Description
PS2429BP
PS2429JBP
Unlighted
PS243079BP
PS2430J79BP*
Light 24VDC
PS243083BP
PS2430J83BP*
Light 120V/60Hz
Note: Max 6.5mm cable size required for connector w/o 6' (2m) cord.
IP65 rated when properly installed.
Engineering Data:
Conductors: 2 Poles Plus Ground; Cable Range (Connector Only):
6 to 8mm (0.24 to 0.31 Inch); Contact Spacing: 11mm
Exhaust Ports
06T . ...........................................................................................1/2 Inch
07T . ...........................................................................................3/4 Inch
Maximum Pressure
Standard Coil .................................................. 145 psig (10.0 bar)
High Pressure Coil.......................................... 200 psig (13.8 bar)
Minimum Operating Pressure ............................... 30 psig (2.1 bar)
Temperature Ratings . ............................... 40F to 120F (4C to 49C)
Weight
06T . ...........................................................................2.25 lbs. (1.02 kg)
07T . ........................................................................... 3.75 lbs. (1.70 kg)
Materials of Construction
30mm
Body.................................................................................... Aluminum
18mm
42mm
Specifications
Connections
Description
ISO 20401
Unlighted
PS203279BP
PS2032J79BP*
Light 6-24VDC
Pin Number
PS203283BP
PS2032J83BP*
Light 120V/60Hz
Note: Max 6.5mm cable size required for connector w/o 6' (2m) cord.
IP65 rated when properly installed.
Engineering Data:
Conductors: 2 Poles Plus Ground; Cable Range (Connector Only):
8 to 10mm (0.31 to 0.39 Inch); Contact Spacing: 18mm
Color
Supply
Brown
White
0V (GND)
Supply
Blue
24V
Alarm Output
Signal
Black
C165
24V
Function
4-PIN MICRO
(TOP COVER)
1
BLK
PS2028JBP
BLUE
PS2028BP
BRN
Connector
with 6' (2m) Cord
WHT
Connector
Filters
80
Coalescers
60
Flow (SCFM)
Regulators
40
Filter /
Regulators
20
Lubricators
Combos
Product
Selection
Accessories
Series
Catalog 0700P-E
Product
Selection
Filters
Coalescers
Regulators
06P
07P
Operation
Filter /
Regulators
Lubricators
Combos
Accessories
Ordering Information
06P
Series
06P
07P
Auto Pilot
Soft Start Valve
Auto Pilot
Soft Start Valve
Port Size
2 3/8 Inch (06P)
3 1/2 Inch (07P)
Engineering
Level
* Will be
Entered at
Factory
Thread
Type / Label
Blank NPT
1* BSPP (G)
* 3/8 & 1/2 inch meet
ISO 1179-1 Standard.
C166
Catalog 0700P-E
06P
06P
07P
75
45
25
100
60
33
125
75
38
150
85
45
07P
1
20
40
60
Flow (SCFM)
80
100
Series
Flow Cv
06P
3.8
07P
5.5
120
Filters
C
Product
Selection
06P
3/8"
3.36
(85)
4.70
(119)
2.08
(53)
1.48
(38)
1.04
(26)
1.68
(43)
07P
1/2"
3.81
(96)
5.21
(132)
2.07
(53)
1.80
(46)
1.37
(35)
1.91
(48)
C
E
C
E
Regulators
Filter /
Regulators
Inches (mm)
06P
07P
Repair Kits
Specifications
Materials of Construction
Weight
06P.........................................................................2.75 lb. (1.25 kg)
07P........................................................................ 4.50 lb. (2.04 kg)
Body.................................................................................... Aluminum
Bottom Plug
06P.......................................................................................... Brass
07P.............................................................................................Zinc
C167
Lubricators
Combos
Accessories
Port
Size
Model
Coalescers
Dimensions:
Prep-Air II
Air Line Accessories
Catalog 0700P-E
B
D
G
H
K Typ.
J
H
A
F
K Typ.
E
F
G
C
M
L
C
Product
Selection
PS417BP
PS419
PS743P, PS843P
B
A
F
E
Filters
H
G
Coalescers
F
G
PS943P
E
Regulators
B
F
B
A
Filter /
Regulators
D
C
Lubricators
(Includes Panel Mount Nut)
Combos
Dimensions
PS963P
P3NKA00MW
(Includes Aluminum
Panel Mount Nut)
Accessories
Kit
1.80
(46)
2.37
(60)
0.90
(23)
1.35
(34)
1.00
(25)
0.50
(13)
0.20
(5)
1.24
(31)
0.56
(14)
0.22
(6)
0.45
(11)
0.62
(16)
PS417BP
(10F, 14F, P3A, 14R, 14E)
1.80
(46)
2.17
(55)
0.90
(23)
1.35
(34)
1.00
(25)
0.50
(13)
0.20
(5)
1.24
(31)
0.56
(14)
0.22
(6)
0.45
(11)
0.62
(16)
PS419
(04L)
0.84
(21)
3.25
(83)
1.50
(38)
0.42
(11)
2.00
(51)
0.94
(24)
0.28
(7)
1.44
(37)
PS743P
(06F, 11F, 06L, 16L)
1.00
(25)
3.94
(100)
1.57
(40)
0.50
(13)
2.19
(56)
1.25
(32)
0.28
(7)
1.68
(43)
PS843P
(07F, 12F, 07L, 17L)
0.28
(7)
2.12
(54)
2.00
(51)
0.14
(4)
1.85
(47)
0.63
(16)
0.28
(7)
1.41
(36)
PS943P
(05F, 15F, 15L)
0.84
(21)
2.59
(66)
0.49
(12)
1.02
(26)
1.85
(47)
0.61
(15)
0.28
(7)
PS963P
(05R, 10R, 05E, 27E)
0.84
(21)
3.26
(83)
0.77
(20)
1.46
(37)
2.00
(51)
0.94
(24)
0.28
(7)
PS707P
(06R, 06E, 11R)
1.00
(25)
3.94
(100)
0.65
(17)
1.68
(43)
2.19
(56)
1.25
(32)
0.28
(7)
PS807P
(07R, 07E, 12R)
6.22
(158)
8.19
(208)
2.75
(70)
1.97
(50)
2.36
(60)
1.77
(45)
1.30
(33)
P3NKA00MW
(P3NF, P3NR, P3NE, P3NL)
inches (mm)
C168
Catalog 0700P-E
Safety Guide
1. GENERAL INSTRUCTIONS
1.1. Scope: This safety guide is designed to cover general guidelines on the installation, use, and maintenance of Pneumatic Division
Valves, FRLs (Filters, Pressure Regulators, and Lubricators), Vacuum products and related accessory
components.
1.2. Fail-Safe: Valves, FRLs, Vacuum products and their related components can and do fail without warning for many reasons. Design all
systems and equipment in a fail-safe mode, so that failure of associated valves, FRLs or Vacuum products will not endanger persons
or property.
1.3 Relevant International Standards: For a good guide to the application of a broad spectrum of pneumatic fluid power devices see:
ISO 4414:1998, Pneumatic Fluid Power General Rules Relating to Systems. See www.iso.org for ordering information.
1.4. Distribution: Provide a copy of this safety guide to each person that is responsible for selection, installation, or use of Valves, FRLs
or Vacuum products. Do not select, or use Parker valves, FRLs or vacuum products without thoroughly reading and understanding this
safety guide as well as the specific Parker publications for the products considered or selected.
1.5. User Responsibility: Due to the wide variety of operating conditions and applications for valves, FRLs, and vacuum products Parker
and its distributors do not represent or warrant that any particular valve, FRL or vacuum product is suitable for any specific end use
system. This safety guide does not analyze all technical parameters that must be considered in selecting a product. The user, through
its own analysis and testing, is solely responsible for:
Making the final selection of the appropriate valve, FRL, Vacuum component, or accessory.
Assuring that all users performance, endurance, maintenance, safety, and warning requirements are met and that the application
presents no health or safety hazards.
Complying with all existing warning labels and / or providing all appropriate health and safety warnings on the equipment on which
the valves, FRLs or Vacuum products are used; and,
Assuring compliance with all applicable government and industry standards.
1.6. Safety Devices: Safety devices should not be removed, or defeated.
1.7. Warning Labels: Warning labels should not be removed, painted over or otherwise obscured.
1.8. Additional Questions: Call the appropriate Parker technical service department if you have any questions or require any additional
information. See the Parker publication for the product being considered or used, or call 1-800-CPARKER, or go to www.parker.com,
for telephone numbers of the appropriate technical service department.
2. PRODUCT SELECTION INSTRUCTIONS
2.1. Flow Rate: The flow rate requirements of a system are frequently the primary consideration when designing any pneumatic system.
System components need to be able to provide adequate flow and pressure for the desired application.
2.2. Pressure Rating: Never exceed the rated pressure of a product. Consult product labeling, Pneumatic Division catalogs or the
instruction sheets supplied for maximum pressure ratings.
2.3. Temperature Rating: Never exceed the temperature rating of a product. Excessive heat can shorten the life expectancy of a product
and result in complete product failure.
2.4. Environment: Many environmental conditions can affect the integrity and suitability of a product for a given application. Pneumatic
Division products are designed for use in general purpose industrial applications. If these products are to be used in unusual
circumstances such as direct sunlight and/or corrosive or caustic environments, such use can shorten the useful life and lead to
premature failure of a product.
2.5. Lubrication and Compressor Carryover: Some modern synthetic oils can and will attack nitrile seals. If there is any possibility of
synthetic oils or greases migrating into the pneumatic components check for compatibility with the seal materials used. Consult the
factory or product literature for materials of construction.
2.6. Polycarbonate Bowls and Sight Glasses: To avoid potential polycarbonate bowl failures:
Do not locate polycarbonate bowls or sight glasses in areas where they could be subject to direct sunlight, impact blow, or
temperatures outside of the rated range.
Do not expose or clean polycarbonate bowls with detergents, chlorinated hydro-carbons, keytones, esters or certain alcohols.
Do not use polycarbonate bowls or sight glasses in air systems where compressors are lubricated with fire resistant fluids such as
phosphate ester and di-ester lubricants.
P10
Catalog 0700P-E
Safety Guide
2.7. Chemical Compatibility: For more information on plastic component chemical compatibility see Pneumatic Division technical bulletins
Tec-3, Tec-4, and Tec-5
2.8. Product Rupture: Product rupture can cause death, serious personal injury, and property damage.
Do not connect pressure regulators or other Pneumatic Division products to bottled gas cylinders.
Do not exceed the maximum primary pressure rating of any pressure regulator or any system component.
Consult product labeling or product literature for pressure rating limitations.
3. PRODUCT ASSEMBLY AND INSTALLATION INSTRUCTIONS
3.1. Component Inspection: Prior to assembly or installation a careful examination of the valves, FRLs or vacuum products must be
performed. All components must be checked for correct style, size, and catalog number. DO NOT use any component that displays any
signs of nonconformance.
3.2. Installation Instructions: Parker published Installation Instructions must be followed for installation of Parker valves, FRLs and
vacuum components. These instructions are provided with every Parker valve or FRL sold, or by calling 1-800-CPARKER, or at
www.parker.com.
3.3. Air Supply: The air supply or control medium supplied to Valves, FRLs and Vacuum components must be moisture-free if ambient
temperature can drop below freezing
4. VALVE AND FRL MAINTENANCE AND REPLACEMENT INSTRUCTIONS
4.1. Maintenance: Even with proper selection and installation, valve, FRL and vacuum products service life may be significantly reduced
without a continuing maintenance program. The severity of the application, risk potential from a component failure, and experience
with any known failures in the application or in similar applications should determine the frequency of inspections and the servicing or
replacement of Pneumatic Division products so that products are replaced before any failure occurs. A maintenance program must
be established and followed by the user and, at minimum, must include instructions 4.2 through 4.10.
4.2. Installation and Service Instructions: Before attempting to service or replace any worn or damaged parts consult the appropriate
Service Bulletin for the valve or FRL in question for the appropriate practices to service the unit in question. These Service and
Installation Instructions are provided with every Parker valve and FRL sold, or are available by calling 1-800-CPARKER, or by accessing
the Parker web site at www.parker.com.
4.3. Lockout / Tagout Procedures: Be sure to follow all required lockout and tagout procedures when servicing equipment. For more
information see: OSHA Standard 29 CFR, Part 1910.147, Appendix A, The Control of Hazardous Energy (Lockout / Tagout)
4.4. Visual Inspection: Any of the following conditions requires immediate system shut down and replacement of worn or damaged
components:
Air leakage: Look and listen to see if there are any signs of visual damage to any of the components in the system. Leakage is an
indication of worn or damaged components.
Damaged or degraded components: Look to see if there are any visible signs of wear or component degradation.
Kinked, crushed, or damaged hoses. Kinked hoses can result in restricted air flow and lead to unpredictable system behavior.
Any observed improper system or component function: Immediately shut down the system and correct malfunction.
Excessive dirt build-up: Dirt and clutter can mask potentially hazardous situations.
Caution: Leak detection solutions should be rinsed off after use.
4.5. Routine Maintenance Issues:
Remove excessive dirt, grime and clutter from work areas.
Make sure all required guards and shields are in place.
4.6. Functional Test: Before initiating automatic operation, operate the system manually to make sure all required functions operate
properly and safely.
4.7. Service or Replacement Intervals: It is the users responsibility to establish appropriate service intervals. Valves, FRLs and vacuum
products contain components that age, harden, wear, and otherwise deteriorate over time. Environmental conditions can significantly
accelerate this process. Valves, FRLs and vacuum components need to be serviced or replaced on routine intervals. Service intervals
need to be established based on:
Previous performance experiences.
Government and / or industrial standards.
When failures could result in unacceptable down time, equipment damage or personal injury risk.
4.8. Servicing or Replacing of any Worn or Damaged Parts: To avoid unpredictable system behavior that can cause death, personal
injury and property damage:
Follow all government, state and local safety and servicing practices prior to service including but not limited to all OSHA Lockout
Tagout procedures (OSHA Standard 29 CFR, Part 1910.147, Appendix A, The Control of Hazardous Energy Lockout / Tagout).
Disconnect electrical supply (when necessary) before installation, servicing, or conversion.
Disconnect air supply and depressurize all air lines connected to system and Pneumatic Division products before installation, service,
or conversion.
Installation, servicing, and / or conversion of these products must be performed by knowledgeable personnel who understand how
pneumatic products are to be applied.
After installation, servicing, or conversions air and electrical supplies (when necessary) should be connected and the product tested
for proper function and leakage. If audible leakage is present, or if the product does not operate properly, do not put product or
system into use.
Warnings and specifications on the product should not be covered or painted over. If masking is not possible, contact your local
representative for replacement labels.
4.9. Putting Serviced System Back into Operation: Follow the guidelines above and all relevant Installation and Maintenance Instructions
supplied with the valve FRL or vacuum component to insure proper function of the system.
P11
Catalog 0700P-E
Offer of Sale
The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors
(Seller) are hereby offered for sale at prices to be established by Seller. This offer and its acceptance by any customer (Buyer) shall be governed by all of the following
Terms and Conditions. Buyers order for any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer.
All goods or work described will be referred to as Products.
P12