Professional Documents
Culture Documents
Lewatit MonoPlus SP 112 H L
Lewatit MonoPlus SP 112 H L
uniform size (monodisperse) based on a styrene-divinylbenzene copolymer, in fully regenerated form (min.
99% H+), designed for all demineralization applications. The monodisperse beads have high chemical and
osmotic stability. The extremely high monodispersity (uniformity coefficient: max. 1.1) and very low fines
content of max. 0.1% (< 0.315 mm) result in particularly low pressure losses compared with standard resins.
demineralization of water for industrial steam generation operated with co-current or modern counter
-current systems like e.g. Lewatit WS System, Lewatit Liftbed System or Lewatit Rinsebed
System
polishing using the Lewatit Multistep System or a conventional mixed bed arrangement in
combination with Lewatit MonoPlus MP 800 or Lewatit MonoPlus MP 800 OH
condensate polishing in combination with Lewatit MonoPlus MP 800 or
Lewatit MonoPlus MP 800 OH
The special properties of this product can only be fully utilized if the technology and process used correspond to the current state-of-the
-art. Further advice in this matter can be obtained from Lanxess, Business Unit Ion Exchange Resins.
This document contains important information and must be read in its entirety.
Edition: 2011-10-13
Previous Edition: 2011-05-12
1/4
General Description
Ionic form as shipped
Functional group
Matrix
Structure
Appearance
H+
sulfonic acid
crosslinked polystyrene
macroporous
beige-grey, opaque
Uniformity Coefficient*
Mean bead size*
Bulk density
Density
Water retention
(+/- 5 %)
g/l
approx. g/ml
wt. %
Total capacity*
Volume change
Stability
H --> Na
at pH-range
Storability
Storability
of the product
temperature range
0.67
(+/-
56
This document contains important information and must be read in its entirety.
2/4
60
1.6
-8
0
max. months
C
0.05
740
1.18
min. eq/l
max. vol. %
Edition: 2011-10-13
Previous Edition: 2011-05-12
1.1
14
24
-20
40
Operating temperature
Operating pH-range
Bed depth
Specific pressure drop
Pressure drop
Linear velocity
Linear velocity
Bed expansion
Freeboard
120
0
min. mm
approx. kPa*h/m2
max. kPa
max. m/h
approx. m/h
(15 C)
operation
backwash (20 C)
(20 C, per m/h)
backwash
(extern / intern)
14
800
0.8
300
60***
10
approx. vol. %
vol. %
Regenerant
12
4.5
60
HCl
Counter current
regeneration
level
Counter current
regeneration
concentration
Linear velocity
H2SO4
approx. g/l
HCl
H2SO4
50
80
wt. %
HCl
H2SO4
4-6
1.5 / 3**
regeneration
approx. m/h
HCl
H2SO4
5
10 - 20
Linear velocity
rinsing
approx. m/h
Co current regeneration
level
Co current regeneration
concentration
Linear velocity
regeneration
Linear velocity
rinsing
Rinse water requirement
Mixed bed operation
Bed depth
Regenerant
level
Regenerant
concentration
approx. g/l
HCl
H2SO4
100
150
approx. wt. %
HCl
H2SO4
6 - 10
1.5 / 3**
approx. m/h
HCl
H2SO4
5
10 - 20
approx. m/h
approx. BV
5
2.5
min. mm
approx. g/l
500
approx. wt. %
HCl
H2SO4
100
150
HCl
H2SO4
4-8
2-8
* The recommended operating conditions refer to the use of the product under normal operating conditions. It is based on tests in pilot
plants and data obtained from industrial applications. However, additional data are needed to calculate the resin volumes required for
ion exchange units. These data are to be found in our Technical Information Sheets.
** Regeneration progressive
*** 100m/h for polishing
This document contains important information and must be read in its entirety.
Edition: 2011-10-13
Previous Edition: 2011-05-12
3/4
This information and our technical advice whether verbal, in writing or by way of trials
are given in good faith but without warranty, and this also applies where proprietary rights
of third parties are involved. Our advice does not release you from the obligation to check
its validity and to test our products as to their suitability for the intended processes and
uses. The application, use and processing of our products and the products manufactured
by you on the basis of our technical advice are beyond our control and, therefore, entirely
your own responsibility. Our products are sold in accordance with the current version of
our General Conditions of Sale and Delivery.
This document contains important information and must be read in its entirety.
Edition: 2011-10-13
Previous Edition: 2011-05-12
4/4
Lenntech