Professional Documents
Culture Documents
CHAIN Scanner
CHAIN Scanner
CHAIN Scanner
FEATURES
Standard configuration using one or two
probes and optional configuration using
four probes for TOFD, phased array, or
pulse-echo inspections.
Pipe range with outside diameters from
45mm to 965mm (1.75in. to 38in.)
Encoded manual scan on one or two axis
(depend on the model)
Ergonomic handle to protect encoder connectors and provide cable management
Independent chain links mounted on
bearings wheels coated with urethane
for smooth rolling
Easy clamping device for quick scanner
positioning
STANDARD INCLUSIONS
Main module with a scan-axis encoder
Chain links for 5in., 16in., or 38in.
pipe OD (depending on model) with
quick-release adjustable buckle
5m encoder cable for OmniScan
450mm (17.7in.) probe-holder bar
Two spring-loaded probe holders with
adjustable TOFDP/E yokes
Two spring-loaded probe holders with
adjustable phased array yokes
Probe-positioning system with leadscrew
adjustment
5m divisible cable conduit
Irrigation tubes and fittings
CHAIN scanner tool
Carrying case
Note: probes and wedges are not included with the scanner.
920-175B-EN
Specifications
Length in scan
axis (mm)
Width (mm)
Height (mm)
Weight (kg)
114
75
84
Encoder resolution:
Circumferential (X) axis: 19.2steps/mm
Longitudinal (Y) axis: 226.8steps/mm
Options:
PROBES AND WEDGES
See Olympus Phased Array Ultrasonic Probe and Ultrasonic
Transducers catalogs
* Wedge must be of a IHC version (hole, irrigation, and carbides) in order to be used with the scanner.
Optional package allows the use of 4 probes on the CHAIN scanner for combined TOFD and PA inspections, as per ASME code.
Optional package allows convertion of the CHAIN scanner to a Mouse scanner with magnetic wheels.
CHAIN LINKS
CHAIN scanner short link. For pipe OD less than 9.6in.
Part number: ChainScan-A-Slink
CHAIN scanner long link. For pipe OD greater than 9.6in.
Part number: ChainScan-A-LgLink
OPTIONAL PACKAGES
Extra part package enabling the use of four probes on the
CHAIN scanner
Part number: ChainScan-A-4Probe
Extra part package in order to use the CHAIN scanner as a mouse
scanner with magnetic-wheel holding system instead of chain
links
Part number: ChainScan-A-mouse
20cm long probe-holder bar and leadscrew kit for
CHAIN scanner
Part number: ChainScan-A-SBar
Optional 20cm probe-holder bar and leadscrew kit for confined space
applications.
Ordering information
Part number
ChainScan-X5
ChainScan-XY5
ChainScan-X16
ChainScan-XY16
ChainScan-X38
ChainScan-XY38
www.olympus-ims.com
info@olympusNDT.com
Description
CHAIN Scanner for 45mm to 125mm OD (1.75in. to 5in.) pipe with 1 encoded axis
CHAIN Scanner for 45mm to 125mm OD (1.75in. to 5in.) pipe with 2 encoded axes
CHAIN Scanner for 45mm to 400mm OD (1.75in. to 16in.) pipe with 1 encoded axis
CHAIN Scanner for 45mm to 400mm OD (1.75in. to 16in.) pipe with 2 encoded axes
CHAIN Scanner for 45mm to 960mm OD (1.75in. to 38in.) pipe with 1 encoded axis
CHAIN Scanner for 45mm to 960mm OD (1.75in. to 38in.) pipe with 2 encoded axes
491B River Valley Road 12-01/04, Valley Point Office Tower, 248373 Singapore