Professional Documents
Culture Documents
Pfs 2 Marks
Pfs 2 Marks
1-unit
3.what is module?
A unit of size in dimensional co-ordination for standardization od building materials and components .
BASIC Module is M=10cm=100mm.
7.sunshades/chajja projections
3.What is loading?
When there is adhesion of create to the formwork some forces are development when is is not
really estimated it is assumed.
Qa=300kg/m.
2. what is the rules are followed to decide the overall nominal degree of precision
of a prefabricates
1,from only one dimension is critical the degree of precision corresponding to the dimension of the
component.
2, when more than one dimension of the component are allowed tolerance or allowance.
6.what the limiting value of allowances are calculated for the following formula.
1=+b(l+0.66/l+b), 2=-2(l+0.6/l+b),
3=+-5l/l+b, 4=+-5(l+0.6/l+b).
5-UNIT
1.What is collaspse
Assumption,stress strain curves, code condition.
5.what is the design load for considering abnormal effect such as what
Earthquake, cyclones.