Professional Documents
Culture Documents
3456
3456
4
Protocol Version 4 (TCP/IPv4) and then click Click Action on the
menu bar,
Select Add Legacy Hardware.
6) Add Hardware dialog box opens. Click Next.
7) Select Install the hardware that I manually select from a list
(Advanced). Click Next.
8) Sele) Select Change Adapter Settings on the right
5) Right-click on the Loopback Adapter > rename it as SPLM
Loopback Adapter.
By default, the loopback adapter 192.168.0.1, with Subnet mask of
255.255.0.0.
(Check with your IT department if youre not sure which address is
available to assign to
it)
9) Click on OK to dismiss the Internet Protocol TCP/IP Properties
dialog.
10) Click on OK to dismiss the Loopback Adapter Properties.
51
ID again after you sent out your Machine ID file to Intergraph and
before you
install your new license key.
9) Open SPLM and select Install and Remove > Install License Key to
install the license
key you received from Intergraph.
1) Make sure your laptop works when its connected to the network:
a. Open SPLM > Configure and Test > Select License Machine for
Client
b. Type in your laptops node name, and click OK.
c. Test Seat Reservation > select your laptop as license server and
the product tag >
click OK. A license should be reserved successfully.
d. Make a note of the Seat number and click Close button.
e. Test Seat Release > type in the seat number and click OK. The
license should be
released successfully.
2) Now disconnect from the network, test seat to make sure SPLM
works too.
3) Now you should be able to start your application.
NOTES:
1) If your Windows 7 machine has User Access Control turned on
and you need to run pdlice