Professional Documents
Culture Documents
RPT 768 PDF
RPT 768 PDF
RPT-768
Description
SPECIFICATIONS
The Delta Controls RS-485 MS/TP Network Repeater (RPT-768) is an intelligent MS/TP network
repeater.The repeater has easily indentifiable NET IN and NET OUT RS-485 connections.
It can also be powered by two independent power sources to achieve maximum isolation.
The RPT-768 uses an 8-bit processor to optimize the network signal and to provide
autobaud capabilities.
RS-485
Supports 9600, 19200, 38400, 76800
(default) baud
Application
The Delta Controls RS-485 MS/TP Network
Repeater (RPT-768) conditions an RS-485
network so that additional devices or cable
length can be added.The RPT-768 uses
Deltas MS/TP autobaud feature so that
when a networks baud rate is changed
the repeaters timing is changed to match.
No manual configuration is required.
Network Isolation
With a single transformer
the network isolation is 50 Volts
With two isolated transformers
the network isolation is 500 Volts
Technology
8-bit Processor c/w internal A/D,
Flash, and RAM
Housing
Easy mount housing
RPT-768
Features
> Provides up to 500 Volts of isolation
when both sides of the repeater are
powered by separate transformers
> Comes with a Service Port on NET IN
so that the network can be accessed
from the repeaters location
> Can be used with any BACnet
MS/TP network (it meets BACnet
MS/TP Router specs.)
> Uses Autobaud removing the need
for any special configuration software
or manual adjustment
Connectors
Removable Screwtype terminal
connectors
RJ-11 Service Port
Ground Lug
Wiring
RS-485 LAN on NET IN
RS-485 LAN on NET OUT
(100-120 ohm balanced TSP cable,
16 PF/FT. or lower)
Power on NET IN side when
using single transformer
Power on NET OUT side when using
two isolated transformers
Wiring Class
Class II
Power
24 VAC, 4 VA (per supply),
8 VA in total
Rev. 09_01
>>
ACCESSORIES
RS-485
[-]
24VAC
Power
PWR
[+]
ENERGY MANAGEMENT
EQUIPMENT ACCESSORY
74FK
P5
P4
RX
TX
[-]
[+]
SPECIFICATIONS (cont.)
Ambient
32 to 131 F (0 to 55 C)
10 to 90% RH (non-condensing)
MS/TP LAN
Output
RPT-768
GND 24~
POWER
NET OUT
J2
Size
6.6 x 4.0 x 1.9
(16.5cm x 10cm x 4.75cm)
0.15 lb. (65g.) with enclosure
TERM
ON
Baud Rate
Selection Switch
AUTO
76.8
38.4
Network Termination
Jumpers
19.2
9600
TERM
4800
ON
2400
1200
PWR
POWER
24~ GND
PWR
1
P2
[-]
GND
RX
[+]
24VAC
Power
SERVICE-PORT
NET IN
[+]
TX
[-]
RS-485
1
MS/TP Lan
Input
Service
Port
Ground
Lug
Ordering
Order the RPT-768 Repeater according to the following product number:
RPT-768
Accessories
CON-768
TRM-768
Approvals/Standards
UL916*, CE*, FCC*
(* All Pending)