Professional Documents
Culture Documents
Montaje Conector UFL SMD
Montaje Conector UFL SMD
Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height
U.FL Series
E.FL-LP-040
E.FL-LP-066
2.4(2.5Max)
1.9(2.0Max)
U.FL-LP(V)-040
3(3.2Max)
U.FL-LP-040
U.FL-LP-066
U.FL
Features
E.FL
Plug
U.FL-LP-040
Cable
3. Light weight
4. Accepts high frequency transmission.
U.FL-R-SMT-1
Receptacle
Cable
Plug
Dia.1.32
Dia.1.13
U.FL-R-SMT-1
Receptacle
Plug
U.FL-R-SMT-1
Receptacle
Plug
U.FL-LP-062
Cable
Dia.1.00
2.4Max
Applications
Cable
Dia.0.81
U.FL-LP(V)-040
2.0Max
U.FL-LP-066
2.5Max
Dia.0.81
2.5Max
Receptacle: 15.7mg
U.FL-R-SMT-1
Receptacle
U.FL-LP-088
Cable
2.4Max
Plug
Dia.1.37
U.FL-R-SMT-1
Receptacle
2009.2w
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued
Please Connectors
check the products
status on the
website
RoHS search
at www.hirose-connectors.com, or contact your Hirose sales representative.
U.FL
SeriesUltra
Small or
Surface
Mount soon.
Coaxial
- 1.9mm
or Hirose
2.4mm
Mated
Height
Product Specifications
Ratings
-40C to +90C
Frequency range
Operating humidity
90%RH max.
Storage humidity
DC to 6GHz
Item
1. Contact resistance
Specification
Conditions
10 mA max.
100 V DC
3. Withstanding voltage
200 V AC / 1 minute
4. V.S.W.R.*
Part No.
5. Durability
90%RH max.
Up to 3GHz
3 to 6GHz
1.3 Max
1.35 Max
1.3 Max
1.3 Max
1.3 Max
1.4 Max
1.3 Max
1.5 Max
1.3 Max
1.3 Max
1.3 Max
1.4 Max
Contact resistance
(mating / un-mating,
30 cycles
6. Vibration
7. Shock
8. Humidity
(Steady state)
9. Temperature cycle
Time:
30min. /
3min.
/30min./
3min.
5 cycles
5% salt water solution, 48 hours
Note 1: Cable type connectors were measured with SMA conversion adapters
attached to both ends of the harness product of a suitable 100cm cable.
Note 2: Board type connectors were mounted to a 50 glass epoxy board and
measurements were conducted with SMA conversion adapters attached.
Material / Finishes
Part
Material
Finish
Remarks
Shell
Phosphor bronze
Silver plated
Brass
Gold plated
Gold plated
Plug
Phosphor bronze
PBT
Color: Black
UL94V-0
Receptacle
LCP
Color: Beige
UL94V-0
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please
checkSeriesUltra
the products status
on the Surface
Hirose website
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales Height
representative.
U.FL
Small
Mount
Coaxial
Connectors - 1.9mm
or 2.4mm
Mated
Receptacles
Note 1: Receptacles of (01) specification are sold by the
bag with 100 pieces per bag.
Please order in pack units.
Note 2: Receptacles of (10) specification are sold by the
reel (which contains 2,500 pieces).
Please order in reel units.
Note 3: Receptacles of (40) specification are sold by the
reel (Which contains 4,000 pieces)
Note 4: This area may be covered by insulating material.
GND
BRecommended PCB
Mounting Pattern
SIG
GND
10.05
GND
SIG
10.05
1.050.05
(3.1)
2.6
1.8
3
2.6
0.6
40.05
1.90.05
1.2Max(Note 4)
0.35
1.25
2.20.05
GND
U.FL-R-SMT-1
Part No.
CL No.
Packaging
U.FL-R-SMT-1(01)
331-0472-2-01
U.FL-R-SMT-1(10)
331-0472-2-10
U.FL-R-SMT-1(40)
331-0472-2-40
Weight / EA
RoHS
15.7/mg
YES
Packaging Specifications
Embossed Carrier Tape Dimensions
Reel Dimensions
1
1
0.
+ 0
.5
1.750.1
1.8
20.1
40.1
Center contact
14
0.3
5.50.1
21
3302
120.3
13
80.1
Unreeling direction
1.6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued
Please Connectors
check the products
status on the
website
RoHS search
at www.hirose-connectors.com, or contact your Hirose sales representative.
U.FL
SeriesUltra
Small or
Surface
Mount soon.
Coaxial
- 1.9mm
or Hirose
2.4mm
Mated
Height
Part No.
1.8
1.5
1.93
1.93
Mated Height
3.4
1.85
U.FL-LP-088
U.FL-LP-062
2.8
U.FL-LP(V)-040
2.8
U.FL-LP-066
U.FL-LP-040
2.5mm Max.
2.5mm Max.
2.0mm Max.
2.4mm Max.
2.4mm Max.
(2.4mm Nom.)
(2.4mm Nom.)
(1.9mm Nom.)
(2.3mm Nom.)
(2.3mm Nom.)
Dia. 0.81mm
Dia. 1mm
Dia. 1.37mm
Coaxial cable
Coaxial cable
Coaxial cable
34.8
45.5
71.7
Applicable
Dia. 0.81mm
cable
Coaxial cable
Weight (mg)
53.7
RoHS
YES
Cable Guide
Description
Dia.0.81mm
Coaxial Cable
Dia.1.13mm
Coaxial Cable
Dia.1.32mm
Coaxial Cable
Dia.1mm
Coaxial Cable
Dia.1.37mm
Coaxial Cable
Cable Specification
Cable
Type
04
068
066
062
088
Inner
Conductor
Dielectric
*
Outer
*
Jacket
Nominal
Diameter
Impedance
Diameter
Conductor
7/0.05 SA
Dia.0.40
Single
Dia.0.81
(AWG36)
PFA
Shield TA[SA]
PFA
7/0.08 SA
Dia.0.68
Single
Dia.1.13
(AWG32)
FEP
Shield TA[SA]
FEP
7/0.08 SA
Dia.0.66
Double
Dia.1.32
(AWG32)
FEP
Shield TA
FEP
7/0.071 SA
Dia.0.62
Tape, single
Dia.1
(AWG33)
FEP
Shield TAT
FEP
7/0.102 SA
Dia.0.88
Single
Dia.1.37
(AWG30)
FEP
Shield TA
FEP
Nominal attenuation
At 3GHz
At 6GHz
6.52dB/m
9.52dB/m
[6.45dB/m]
[9.42dB/m]
3.73dB/m
5.44dB/m
[3.43dB/m]
[5.13dB/m]
50 ohms
3.8dB/m
5.6dB/m
50 ohms
3.1dB/m
4.4dB/m
50 ohms
2.8dB/m
4.3dB/m
50 ohms
50 ohms
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please
checkSeriesUltra
the products status
on the Surface
Hirose website
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales Height
representative.
U.FL
Small
Mount
Coaxial
Connectors - 1.9mm
or 2.4mm
Mated
Ordering Information
U.FL - [] LP - [] - A - (L)
1
1 Series name
U.FL
2 Assembly type
3 Cable type
4 Total length(mm)
Length(L)
U.FL-LP-040
U.FL-LP-066
U.FL-LP-066
U.FL-LP(V)-040
U.FL-LP-062
U.FL-LP-088
Standard Tolerance
L=35 to 200mm
04mm
L=200 to 500mm
08mm
L=500 to 1000mm
12mm
1.5% of (L)
Description
U.FL-2LP-04N1T-A-(L)
U.FL-2LP-04N2T-A-(L)
U.FL-LP-04N1T-A-(L)
U.FL-LP-04N2T-A-(L)
U.FL-2LP-068N1T-A-(L)
U.FL-2LP-068N2T-A-(L)
U.FL-LP-068N1T-A-(L)
U.FL-LP-068N2T-A-(L)
U.FL-2LP-066N1-A-(L)
U.FL-2LP-066N2-A-(L)
U.FL-LP-066N1-A-(L)
U.FL-LP-066N2-A-(L)
U.FL-2LP(V)-04N1T-A-(L)
U.FL-2LP(V)-04N2T-A-(L)
U.FL-LP(V)-04N1T-A-(L)
U.FL-LP(V)-04N2T-A-(L)
U.FL-2LP-062N1D-A-(L)
U.FL-2LP-062N2D-A-(L)
U.FL-LP-062N1D-A-(L)
U.FL-LP-062N2D-A-(L)
U.FL-2LP-088N1T-A-(L)
U.FL-2LP-088N2T-A-(L)
U.FL-LP-088N1T-A-(L)
U.FL-LP-088N2T-A-(L)
RoHS
YES
Please contact Hirose Sales Representative for cable length and cable end treatment.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued
Please Connectors
check the products
status on the
website
RoHS search
at www.hirose-connectors.com, or contact your Hirose sales representative.
U.FL
SeriesUltra
Small or
Surface
Mount soon.
Coaxial
- 1.9mm
or Hirose
2.4mm
Mated
Height
Conversion Adapters
SMA Conversion Adapter
(Mating portion: U.FL side jack - SMA side plug)
(10.7)
Note: The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
8HEX
Part No.
CL No.
RoHS
HRMP-U.FLJ(40)
311-0300-2-40
YES
14.05
(4.05)
5.6
6.35
1/4-36UNS-2A
Note: The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
Part No.
CL No.
RoHS
HRMJ-U.FLP(40)
311-0301-5-40
YES
(18.6)
(4)
5.5
1/4-36UNS-2A
Receptacle to Inspection
Part No.
CL No.
RoHS
HRMJ-U.FLP-ST1(40)
311-0385-5-40
YES
12.9
(7.9)
(4.4)
7HEX
5
1
M50.5
Part No.
CL No.
RoHS
U.FL-R-1
331-0466-0
YES
(90)
15
U.FL
2.1
50
Part No.
CL No.
U.FL-LP-N-2
331-0494-5
U.FL-LP(V)-N-2
331-0493-2
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please
checkSeriesUltra
the products status
on the Surface
Hirose website
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales Height
representative.
U.FL
Small
Mount
Coaxial
Connectors - 1.9mm
or 2.4mm
Mated
Usage Precautions
1. Plugs
1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges
and pull off vertically, in the direction of the connector mating axis.
2) To mate the connectors, the mating axes of both connectors must be
Extraction Jig
aligned and the connectors can be mated. The "click" will confirm fully
U.FL Cable
mated connection.Do not attempt to insert on an extreme angle.
Assembly
U.FL-R-SMT-1
After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram
below.
U.FL-LP
Cable Assembly
U.FL-R-SMT-1
3N max (U.FL-LP(V)-040, U.FL-LP-062)
4N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)
(3) Precautions
2. Receptacles
250 max. for
10 seconds
[]
260
240
220
200
180
160
140
120
100
80
Preheat
(130 to 180)
230
220
50 seconds max.
60 seconds max.
Time
(2) Recommended
manual soldering
0.1 to 0.12 mm
2 times