Professional Documents
Culture Documents
Indirect Bracket Bonding Orthodontic IDB LAB Bonding Lab Set Up
Indirect Bracket Bonding Orthodontic IDB LAB Bonding Lab Set Up
Indirect Bracket Bonding Orthodontic IDB LAB Bonding Lab Set Up
advantagesdisadvantages
Nola Retractor
Other Advantages
Reduces doctor chair time
Reduces staff chair time
Improves patient comfort
Possibly reduces treatment time
(less likely need for repositioning)
Adds value to the practice
Transfer Trays
Proposed Disadvantages:
Increased lab time
Increased lab expenses
Turbo
Light Box
Beading Wax
Transparent Inner
Tray
LC Bonding Resin
Separating Medium
LC Flowable
Tray Finish
how it works
Laboratory Phase
Fabricating the IDB transfer tray
RM bond TURBO
Records
Lab Procedure
24hrs
Bonding Day
A+ Essix
Patient Bonding
NOLA Insertion: Start with the frame first, and let the patient adjust before placing the tongue
cup.
Push the tongue cup as far back as the patient can tolerate, have them SLOWLY bite down.
Warn the patient that they may feel some pressure under their tongue.
Pumice
Fit
Bands
Cement after
IDB
LC BONDING RESIN
NO POOLING!!!
Bonding preparation
Apply LC resin to custom
bracket pads
During the lab setup, the composite used on the bracket base creates the
CUSTOM BRACKET PAD
Cure
Cure
Due to the low tear strength, the inner tray material breaks away easily without adhering to
the brackets
When lifting the inner tray from the lingual, place gentle
pressure against the bracket pad.
Removal of Trays
1.
2.
3.
4.
Adhesive / Pad
Bracket adhesive not being worked into
mesh
Too much repositioning on the model
Micro-etching too much
Indirect is the only technique to examine
this prior to bonding
Tooth Adhesive
Contamination
Tray not seated
Hung up on nola
Adhesive /Adhesive
Not micro-etched
Not primed
Not seated
Pressure or lack there of
Thank You
Questions