Professional Documents
Culture Documents
20-10-02131 Electrical Systems Engineering Description
20-10-02131 Electrical Systems Engineering Description
Doc. no. :
Ver. : 1
31.05.12
Version
Date
(dd-mm-yy)
Description
JKH
Document
Owner
Checked
by
Table of Contents:
Page no. 1 of 6
Project :
Doc. no. :
Ver. : 1
Page no. 2 of 6
Project :
Doc. no. :
Ver. : 1
Comment
Comment
Page no. 3 of 6
Project :
Doc. no. :
Ver. : 1
Comment
CABLE DIAGRAMS:
Adapting and marking-up of el. equipment and
cables on the RRM suppliers documentation for
electrical equipment.
Making of unique drawings for each particular RRM
component (f.i.. 4 generators = 4 drawings)
Defining the el. cables according to suppliers
recommendations (using suppliers catalogue
provided by Yard).
Indicating most appropriate positions (areas) for el.
cabinets and components (final positions to be
decided and verified by Yard).
Marking of equipment in a way to be clear which
component belongs to which system and according
to Yard standards (if available).
Marking of special notes related for particular
systems which will help to Yard during installation
CONNECTION DIAGRAMS:
Upgrading of RRM equipment suppliers
documentation with coordinated information for
connection.
No internal connection diagrams are provided for
motor starters etc
NOTES:
For some of systems, cable and connection
diagrams are merged in one common drawing for
practical reasons
Page no. 4 of 6
Project :
Doc. no. :
Ver. : 1
Comment
Comment
Page no. 5 of 6
Project :
Doc. no. :
Ver. : 1
3 TECHNICAL INPUT
The Yard is responsible to provide all necessary input (General arrangement, Tank Plan,
Hazardous areas plan, Machinery system drawings, Yards Electrical system drawings, List of
alarms for Yard equipment, etc) for the above work except for the RRM equipment which is
responsibility of RRM.
Page no. 6 of 6