The most retentive post cast post -post that cause lateral perforation parallel smooth or serrated -el spures should be put at the proximal and bulbuse -130--160 finish line ceramo-metal -boilogical width from the base of the sulcus to alveolur bone -one of these not from the colour system the answer intinsity -the post use to retain the core not to rainforce the tooth
The most retentive post cast post -post that cause lateral perforation parallel smooth or serrated -el spures should be put at the proximal and bulbuse -130--160 finish line ceramo-metal -boilogical width from the base of the sulcus to alveolur bone -one of these not from the colour system the answer intinsity -the post use to retain the core not to rainforce the tooth
The most retentive post cast post -post that cause lateral perforation parallel smooth or serrated -el spures should be put at the proximal and bulbuse -130--160 finish line ceramo-metal -boilogical width from the base of the sulcus to alveolur bone -one of these not from the colour system the answer intinsity -the post use to retain the core not to rainforce the tooth
-fixed _fixed bridge loose from one side and firm from other side cut the loose
part and convert ir cantilever
-prep should be smooth convex round -3 missing teeth with the teeth unparrarel ,,,, design fixed-removable -amount of tapering ,,,,i think the answer 7.5 to 23 but not sure -the most retentive post ***** cast post -post that cause lateral perforation **** parallel smooth or serrated -el spures should be put at the proximal and bulbuse -130--160 finish line ceramo-metal -boilogical width from the base of the sulcus to alveolur bone -one of these not from the colour system *** the answer intinsity -the post use to retain the core not to rainforce the tooth -one of these incorrect about the ponotic design -* Dome shape attach wide area to ridge side -itching of fitting surface of porecalin veneer hydroflouric acid 1 minute -sandblasting increase the witibilty of the suface -most of the porcaline fracture at the porcaline -metal interface -most common cause of porcaline fracture reduced thickness -sialine coupling agent in porcalin veneer do the following? 1-bonding between enamel and porcalin 2-bonding between resin and porcalin 3-bonding between enamel and resin -dentin bonded posterior crown we use?1-chemical cure cement2-light cure cement3-daul cure cement -arrange according to most stable to least stable (something like that) 1-polysulphide 2-polyether 3-addition silicon 4-condensation silicon *which system is used to stabilize (?) the removable dies? -straight dowel -curved dowel -2 systems ( straight & curved dowel) -pindex system *OVD is measured when teeth in -ICP -RCP -other choices (can't remember) *shimstock is used for -occlusal contact between maxillary & mandibular teeth -proximal contact between maxillary & mandibular teeth -other choices * lingual wrap around the tooth is used to -improve retention -improve resistance -aesthetics -increase connection with enamel rods around the tooth (?) -all of the above ***the answers of the last few question : the saline i gues between enamel and porcalin coz the resin will eventually be worn out the materials from best to least stable addition silicon , polysulfite , polyethir , condensation silicon shimstock for the occlusal curing by dual affect ovd is at icp the discs & the wrap i don't know lingual wrap : retention
kaman plolyethir more stable than polysulfite i think heak
bs polysulfite u can use in moisture , dont know am not sure i think el pindex coz am searching online /7 they're saying its the most accurate wo absar sho i checked polyether is more stable than polysulfide so addition , poly E , poly S , condensation amount of tapering ,,,,i think the answer 7.5 to 23 but not sure the most retentive post ***** cast post post that cause lateral perforation **** parallel smooth or serrated