Professional Documents
Culture Documents
Enterasys Networks 2B0-015 ES Wireless
Enterasys Networks 2B0-015 ES Wireless
ES Wireless
Version 1.0
QUESTION NO: 1
What is the default password on the R2?
A. public
B. private
C. admin
D. password
Answer: D
QUESTION NO: 2
The RoamAbout adapter/carrier modules:
Answer: A
QUESTION NO: 3
What are two reasons to do a Link Test when planning and installing a Wireless
Infrastructure Network?
Answer: A,B
QUESTION NO: 4
What does the RoamAbout employ, by default, to confirm successful frame delivery?
Answer: B
QUESTION NO: 5
When configuring LAN-to-LAN Endpoint, which of the following do you need?
Answer: A
QUESTION NO: 6
What is a wireless device called when its transmissions cannot be sensed by
another wireless device or devices in the network?
A. Hidden Station
B. Hidden Client
C. Rogue Station
D. Rogue Client
Answer: A
QUESTION NO: 7
What are two ways you can make Telnet access to your R2s more secure?
A. Enable SSH
B. Enable SSL/TLS
C. Change the password regularly
D. Enable encryption
Answer: A,C
QUESTION NO: 8
What does the # represent on the AP LEDs?
A. Network congestion
B. Wired LAN activity
C. Wireless LAN activity
D. Unable to forward packets
Answer: B
QUESTION NO: 9
Ad Hoc Mode is an example of which wireless topology?
Answer: D
QUESTION NO: 10
Which of the following does NOT affect the size of a cell?
A. Network utilization
B. Humidity
C. Transmit speeds
D. Radio frequency noise
Answer: B
QUESTION NO: 11
Up to how many buildings may be connected in a Point-to-Multipoint configuration?
A. 12
B. 3
C. 8
D. 7
Answer: D
QUESTION NO: 12
Which of the following does NOT affect the size of a cell?
A. Humidity
B. Transmit speeds
C. Network utilization
D. Radio frequency noise
Answer: A
QUESTION NO: 13
What file extension is used for RoamAbout Boot ROM image files?
A. .txt
B. .BIN
C. .WEP
D. .asp
Answer: B
QUESTION NO: 14
How do you avoid radio frequency interference within an area when positioning
multiple APs with 802.11b PC Cards installed?
Answer: B
QUESTION NO: 15
What are two solutions to a "Hidden Station" problem?
Answer: A,C
QUESTION NO: 16
What must be configured before an Access Point can be successfully upgraded via
the console?
A. TFTP/BootP server
B. Wireless Network Parameters
C. Image files
D. The "Reset to Factory Defaults" parameter
Answer: A
QUESTION NO: 17
Where would you look to find what MIBs are supported on the RoamAbout Access
Points?
Answer: A
QUESTION NO: 18
The RoamAbout Wireless Ethernet Adapter is used to:
Answer: B
QUESTION NO: 19
What is the normal LED indication for both wired and wireless LAN LEDs?
A. Constant blinking
B. Solid
C. Off
D. Random blinking
Answer: D
QUESTION NO: 20
Which of the following is NOT a result of radio interference?
Answer: B
QUESTION NO: 21
IEEE 802.11 stipulates the use of which security measure to make the wireless
network at least as secure as a normal wired LAN?
Answer: D
QUESTION NO: 22
What must be used to power the AP via the Ethernet cable?
Answer: D
QUESTION NO: 23
When should an Upline Dump be enabled for the AP 2000?
Answer: A
QUESTION NO: 24
Which of the following is NOT a reason to perform an indoor site survey?
Answer: C
QUESTION NO: 25
Why is it important to read Release Notes when installing a wireless PC Card and its
drivers?
Answer: D
QUESTION NO: 26
What does the # represent on the AP LEDs?
Answer: B
QUESTION NO: 27
Which of the following is NOT a source of radio interference?
Answer: D
QUESTION NO: 28
What are two reasons to do a Link Test when planning and installing a Wireless
Infrastructure Network?
Answer: A,D
QUESTION NO: 29
Answer: B
QUESTION NO: 30
Which of the following is necessary when using directional antennas?
A. Visual line-of-sight
B. AP on either end must be set to auto-transmit
C. Antenna height of at least 5 meters
D. Each AP must be configured for authentication
Answer: A
QUESTION NO: 31
Which AP Manager utility is used during LAN-to-LAN installations to determine signal
strength?
A. Link test
B. Authentication
C. Site Monitor
D. Integrity Check
Answer: A
QUESTION NO: 32
Which of the following is necessary when using directional antennas?
A. Visual line-of-sight
B. AP on either end must be set to auto-transmit
C. Antenna height of at least 5 meters
D. Each AP must be configured for authentication
Answer: A
QUESTION NO: 33
How can you tell whether or not you are in a secure web management session?
Answer: A
QUESTION NO: 34
What media access method does the RoamAbout use?
A. CSMA/CD
B. Binary Sequential Back off
C. CSMA/CA
D. Beacon exchange
Answer: C
QUESTION NO: 35
Which of the following AP Manager features allows you to check your existing
wireless network connections for consistent settings?
A. Network Parameters
B. Wireless Parameters
C. Integrity Parameters
D. Authentication Parameters
Answer: C
QUESTION NO: 36
Answer: C
QUESTION NO: 37
How do you avoid radio frequency interference within an area when positioning
multiple APs with 802.11b PC Cards installed?
Answer: B
QUESTION NO: 38
What does the RoamAbout employ, by default, to confirm successful frame delivery?
Answer: C
QUESTION NO: 39
When should an Upline Dump be enabled for the AP 2000?
Answer: B
QUESTION NO: 40
What does the # represent on the AP LEDs?
Answer: C
QUESTION NO: 41
The RoamAbout Access Points with 802.11b PC Cards installed use:
Answer: D
QUESTION NO: 42
Which of the following answers is NOT true? AP Firmware upgrades are sometimes
necessary to:
Answer: D
QUESTION NO: 43
IEEE 802.11 stipulates the use of which security measure to make the wireless
network at least as secure as a normal wired LAN?
A. WEP Encryption
B. Host key generation
C. 802.1X Authentication
D. A lockable security box for the Access Point
Answer: A
QUESTION NO: 44
What does the channel represent when configured on the Access Point?
Answer: C
QUESTION NO: 45
What does the RoamAbout employ, by default, to confirm successful frame delivery?
Answer: D
QUESTION NO: 46
What is the name of AP Manager integrated BootP/TFTP server application?
A. RAT
B. NetSight Atlas
C. NCM_PCOV
D. NetRider
Answer: D
QUESTION NO: 47
The RoamAbout adapter/carrier modules:
Answer: C
QUESTION NO: 48
What must be used to power the AP via the Ethernet cable?
Answer: A
QUESTION NO: 49
Which of the following is NOT a feature of the RoamAbout Client Utility?
A. Monitor the amount of collisions in the wireless network before enabling the
RTS/CTS Protocol
B. Monitor SNR levels and signal and noise levels
C. View and modify the configuration on the RoamAbout 802.11b PC Card
D. Monitor the wireless performance of the client RoamAbout 802.11b PC Card
Answer: A
QUESTION NO: 50
Which of the following is NOT a source of radio interference?
Answer: B
QUESTION NO: 51
Why is it important to read Release Notes when installing a wireless PC Card and its
drivers?
Answer: C
QUESTION NO: 52
Where would you look to find what MIBs are supported on the RoamAbout Access
Points?
Answer: A
QUESTION NO: 53
Ad Hoc Mode is an example of which wireless topology?
Answer: C
QUESTION NO: 54
What are two solutions to a "Hidden Station" problem?
Answer: C,D
QUESTION NO: 55
Which AP Manager utility is used during LAN-to-LAN installations to determine signal
strength?
A. Link test
B. Integrity Check
C. Authentication
D. Site Monitor
Answer: A
QUESTION NO: 56
In terms of bandwidth, how do the IEEE 802.11a and 802.11b specifications differ?
Answer: B
QUESTION NO: 57
Answer: B
QUESTION NO: 58
In which of the following devices is the PC Radio Card NOT used?
Answer: C
QUESTION NO: 59
Which of the following does NOT affect the size of a cell?
A. Transmit speeds
B. Humidity
C. Network utilization
D. Radio frequency noise
Answer: B
QUESTION NO: 60
What is a wireless device called when its transmissions cannot be sensed by
another wireless device or devices in the network?
A. Hidden Station
B. Rogue Station
C. Hidden Client
D. Rogue Client
Answer: A
QUESTION NO: 61
What are two ways you can make Telnet access to your R2s more secure?
A. Enable SSH
B. Change the password regularly
C. Enable encryption
D. Enable SSL/TLS
Answer: A,B
QUESTION NO: 62
Which AP Manager utility is used during LAN-to-LAN installations to determine signal
strength?
A. Link test
B. Site Monitor
C. Integrity Check
D. Authentication
Answer: A
QUESTION NO: 63
Ad Hoc Mode is an example of which wireless topology?
Answer: A
QUESTION NO: 64
How can you tell whether or not you are in a secure web management session?
Answer: D
QUESTION NO: 65
What type of cable is required to connect a terminal to the console port of the AP?
A. Cross-over
B. Null Modem DB9 to DB9
C. Straight-through Cat 5
D. Multi-Mode Fiber
Answer: B
QUESTION NO: 66
What must be used to power the AP via the Ethernet cable?
D. MOD-TAP connector
Answer: A
QUESTION NO: 67
What file extension is used for RoamAbout Boot ROM image files?
A. .txt
B. .asp
C. .BIN
D. .WEP
Answer: C
QUESTION NO: 68
For Rapid Rekeying to be employed, what must be enabled and configured on the
Access Point?
A. 802.1X Authentication
B. Dynamic Key Distribution
C. User Personalized Networking
D. Secure Shell
Answer: A
QUESTION NO: 69
With Secure Access enabled on an AP with an IEEE 802.11b PC Card installed, which
of the following is true?
A. The AP allows access to wireless clients that use "ANY" as the wireless network
name
B. The AP denies access to wireless clients that do not use the correct wireless
network name
C. The AP allows access to wireless clients that leave the wireless network name
configuration blank
D. The AP denies access to wireless clients that do not provide the proper access
password
Answer: B
QUESTION NO: 70
What window in Client Utility provides detailed signal quality information about the
client and its test partner?
A. Log Settings
B. Card Diagnostics
C. Test History
D. Test Results
Answer: D
QUESTION NO: 71
In which of the following devices is the PC Radio Card NOT used?
Answer: B
QUESTION NO: 72
How does Spread Spectrum handle radio signals?
Answer: A
QUESTION NO: 73
With Secure Access enabled on an AP with an IEEE 802.11b PC Card installed, which
of the following is true?
A. The AP allows access to wireless clients that use "ANY" as the wireless network
name
B. The AP denies access to wireless clients that do not use the correct wireless
network name
C. The AP allows access to wireless clients that leave the wireless network name
configuration blank
D. The AP denies access to wireless clients that do not provide the proper access
password
Answer: B
QUESTION NO: 74
To upgrade firmware and Boot ROMs, go to which window in AP Manager?
A. Reload
B. Hardware
C. Filtering
D. Discover
Answer: A
QUESTION NO: 75
What are two reasons to do a Link Test when planning and installing a Wireless
Infrastructure Network?
Answer: A,C
QUESTION NO: 76
When configuring LAN-to-LAN Endpoint, which of the following do you need?
Answer: C
QUESTION NO: 77
Which of the following is NOT a feature of the RoamAbout Client Utility?
Answer: B
QUESTION NO: 78
The Fresnel Zone is:
Answer: D
QUESTION NO: 79
To upgrade firmware and Boot ROMs, go to which window in AP Manager?
A. Hardware
B. Filtering
C. Discover
D. Reload
Answer: D
QUESTION NO: 80
Where would you look to find what MIBs are supported on the RoamAbout Access
Points?
Answer: D
QUESTION NO: 81
Why is it important to read Release Notes when installing a wireless PC Card and its
drivers?
Answer: B
QUESTION NO: 82
When configuring LAN-to-LAN Endpoint, which of the following do you need?
Answer: A
QUESTION NO: 83
What is the theoretical maximum number of users that an Access Point can support
per installed PC Radio Card?
A. 25 to 50
B. 365
C. 250
D. 1024
Answer: C
QUESTION NO: 84
In which of the following devices is the PC Radio Card NOT used?
Answer: C
QUESTION NO: 85
If Density is configured at the Microcell level on the AP and Medium Density
Distribution is enabled, the client will:
Answer: D
QUESTION NO: 86
What RMON groups are supported on the RoamAbout APs?
Answer: C
QUESTION NO: 87
IEEE 802.11 stipulates the use of which security measure to make the wireless
network at least as secure as a normal wired LAN?
Answer: D
QUESTION NO: 88
What group ensures the interoperability of wireless products across vendors?
Answer: B
QUESTION NO: 89
For what is the directional antenna generally used?
Answer: C
QUESTION NO: 90
What file extension is used for RoamAbout Boot ROM image files?
A. .txt
B. .asp
C. .WEP
D. .BIN
Answer: D