Professional Documents
Culture Documents
John C. Scott Jr. Aerospace Design Engineer
John C. Scott Jr. Aerospace Design Engineer
WORK SUMMARY:
A professional Design Engineer with (35) year's experience, approximately 12 years were
in aircraft structures electronic communications and electro-mechanical control systems.
The remaining experience was in mechanical engineering from tooling, jet engines,
aircraft manufacturing, modifications and completion with extensive. Extensive manual
drafting skills with
QUALIFICATIONS: AIRCRAFT:
Structures primary & secondary E/M Packaging Turboprop Engines Hydraulic
Lines & Pumps Fixed Wing Structures Electrical Layouts Tooling Sheet Metal / Flat
Patterns Casting / Machine Parts Aircraft Conversions Gas Turbine Engines
Aircraft Interiors Aircraft Bulkheads. Team Center / IMAN, Enovia used with both Catia
& Unigraphics NX
EXPERIENCE
CONTRACT ASSIGNMENTS
April/08 to November/08 *Spirit Aerospace Tulsa Ok Program G650/G250.Team
member of the Master Dimension Group Duties to support Design effort using, CATIA
V5-17 and Enovia for Data Transfer & Release Packages to suppliers for bid. Also so
checking packages for completeness using Catia Enovia and on call for composite design
using fibersim Release 5.3
January/08 to April/08 Vought Aircraft, Dallas, TX. Boeing 787 Program. Supports
existing programs and new business development by researching and developing new
technologies. Designs, develop non-metallic (i.e., composite) structures or materials and
their related fabrication processes for use in engineering. Design surrounding structure
and vehicle systems. Review requirements. Works with Stress Engineering, Materials &
Processes Engineering, and Manufacturing to deliver a producible design. Designs
vehicle structural design related integrated systems. Using CATIA V5 & (Unigraphics
NX as required).
support Design effort on 747-8 using, CATIA V5.R17 with Enovia to produce 3D solid
models & Layouts of VERTICAL STABIILIZER UPPER RUDDER. Also supported
The design and development of 747-8 AIRCRAFE For production and assemblies.
Support the design using Catia v5,R17 and Enovia V5.17
Support Design effort on P-8A using, CATIA V5.R15 with Enovia to produce 3D solid
models & Layouts of Fixed wing aircraft. Also supported the design and development of
737-800 sub hunters for production and assemblies. Support the design Skin's & Doors
team using Catia v5,R15 and Enovia V5.15
Composite tooling using fibersim with Ugii detailed parts, MBD, (MODEL BASE
DEFINITION), and assembly's, MRB, Fars & Dars
Late 1980's T.R.W. ONE SPACE PARK (Contract Assignment) Redondo Beach, CA
Sr. Design Engineer Mechanical & Electromechanical Design Black box packaging
circuit design hybrid, & MIC assemblies, duriod board VLSI.