Professional Documents
Culture Documents
SAP DB Control Center 4
SAP DB Control Center 4
Content
1.1
Limitations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Before Installing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.10
Updating Passwords. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.11
2.12
3.1
Browser Compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Launchpad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.1
4.2
System Directory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.1
5.2
Alert Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Health Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7.1
Connecting to a Cockpit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
SAP DB Control Center (SAP DCC) lets you perform aggregate monitoring of SAP database products,
including SAP HANA, and manage the cockpits (management consoles) that manage the database products.
Use control center to check the overall health of systems located within a data center or across your
enterprise. You can drill down into status indicators for more detailed information, monitor the databases
running on monitored systems, and access cockpits on those systems.
Status displays focus on four high-level areas:
Availability - is the system running and accessible on the network? Is it able to serve the business needs of
its users, including humans and applications? Performance and capacity issues can affect availability.
Performance - is the system meeting the response time expectations of database users, including humans
and applications?
Capacity - is the system meeting its service level agreements?
Alerts - are there errors to resolve or event messages that need review? Alert events, given priorities of
high, medium, or low, are triggered when the system exceeds state and range thresholds set by system
and database administrators.
1.1
Limitations
SAP DB Control Center does not support SAP HANA multitenant database containers.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
Load SAP DB Control Center, a component of SAP HANA, into your system and set it up.
2.1
Before Installing
Understand the installation process, decide how to install SAP DB Control Center, and read the relevant SAP
HANA documentation.
Before you can use SAP DCC, you must:
Table 1:
Install SAP HANA,
SAP HANA studio
PDF
HTML
HTML
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
Note
If you chose to install the HANA DBCC DU using
one of the SAP HANA lifecycle management tools,
skip Installing the HANA DBCC Delivery Unit [page
7].
2.2
Get the SAP DB Control Center delivery unit from the SAP Software Download Center.
Procedure
1. Point your Web browser to the Software Download Center at https://support.sap.com/swdc
2. Select
A-Z .
Entry by Component
DB Control Center
# OS Independent
SAP
HANA database .
5. Click to check the box for the DBCC package (for example, HANADBCC00).
6. Click Add to Download Basket, then click Download Basket.
7. To download the zip file, select SP00 Patch5 for SAP DB Control Center 4.
8. Save the zip file (HANADBCC00_5-70000079.zip, for example) to a convenient location and extract it.
9. Copy the HANADBCC.tgz file you extracted from the zip to a location accessible to your chosen
installation tool: SAP HANA studio or SAP HANA application lifecycle management.
Next Steps
If you plan to use SAP HANA studio to install SAP DCC, continue following the steps in this document.
If you plan to install with SAP HANA application lifecycle management, see Before Installing [page 5].
Note
After installing with SAP HANA application lifecycle management, return here to configure SAP DCC.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
2.3
Make SAP HANA studio aware of the SAP HANA system on which you plan to run SAP DB Control Center. This
enables you to install and configure the delivery unit.
Prerequisites
Install the SAP HANA platform. For details, see:
SAP HANA Server Installation and Update Guide: PDF HTML
Install SAP HANA studio. For details, see:
SAP HANA Studio Installation and Update Guide: PDF HTML
Procedure
1. In SAP HANA studio, go to the Administration Console.
2. Select the Systems view.
3. Right-click in the view and select Add System.
4. Enter the host name and instance number. You may also enter a description if you wish. Click Next.
5. Enter credentials for the SYSTEM account and click Next.
6. Click Finish.
2.4
Prerequisites
Download the HANA DBCC delivery unit. [page 6]
Add the system on which SAP DCC will run to SAP HANA studio. [page 7]
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
Procedure
1. In SAP HANA studio, select
File
Import
Delivery Unit
2. Select the system to which you are importing the delivery unit and click Next.
3. Click the Client radio button.
4. Click Browse and navigate to the HANADBCC.tgz file you saved earlier.
5. Under Actions, select Overwrite inactive version and Activate objects. (They might be selected already.)
6. Click Finish.
In the Job Log view, notice that the import status changes to Running and then to Completed succesfully.
2.5
Procedure
1. In SAP HANA studio, select the system running SAP DCC, then select
Open Administration .
2. Click the Configuration tab.
3. Right-click xsengine.ini and select Add Section.
4. Enter the name scheduler and click Next.
5. Enter assign values to System and click Next.
6. Enter key enabled and value true.
7. Click Finish.
8. Right-click xsengine.ini and select Add Section again.
9. Enter the name httpserver and click Next.
10. Enter assign values to System and click Next.
11. Enter key sessiontimeout and a large value (for example, 3600 sets a session timeout of one hour).
Note
If a session timeout value has already been set, consult your security administrator before changing it.
In many organizations, session timeout values are dictated by security policy.
12. Click Finish.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
2.6
Grant the SYSTEM account (or an equivalent login account) special privileges that allow it to complete initial
configuration of SAP DB Control Center.
Context
The SYSTEM account's roles give it access to the /sap/hana/xs/admin configuration tool. SAP does not
recommend granting this access to other SAP DCC users, including administration users such as DCC_ADM.
Procedure
1. In SAP HANA studio, open the SYSTEM account (or another account with the same roles) under
Security
Users .
2.7
Create a DCC_ADM user account and grant it administrative privileges, grant the privileges to an existing user,
or create one or more administrator accounts, according to your needs.
Context
Users with administrative roles can add, import, and delete systems. Set up at least one administrator
account.
Procedure
1. In SAP HANA studio, right-click the
Security
Users
2. Enter the new user's name (for example, DCC_ADM). Enter a temporary password such as AAA111aaa.
You will change the password later in the the configuration process.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
Next Steps
(Optional) Create additional administration accounts with the same roles as DCC_ADM.
2.8
Create a DCC_COLLECTOR user account and grant it monitoring and administration privileges.
Context
The DCC_COLLECTOR account runs collection jobs to gather the availability, performance, capacity, and
alerts data that SAP DB Control Center displays for each system it monitors.
Procedure
1. In SAP HANA studio, right-click the
Security
Users
2. For the new user's name, enter DCC_COLLECTOR. Enter a temporary password such as AAA111aaa.
You will change the password later in the the configuration process.
3. Select the Granted Roles tab and click +.
4. Select each of these roles and click Ok:
sap.hana.admin.roles::Monitoring
sap.hana.dbcc.roles::DBCCAdmin
5. Press F8 to deploy the role changes to SAP HANA.
10
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
2.9
(Optional) Create an account for general users, DCC_USR, and grant it monitoring and user privileges. Create
more user accounts if you need them.
Procedure
1. In SAP HANA studio, right-click the
Security
Users
2. For the new user's name, enter DCC_USR. Enter a temporary password such as AAA111aaa.
You will change the password later in the the configuration process.
3. Select the Granted Roles tab and click +.
4. Select each of these roles and click Ok:
sap.hana.admin.roles::Monitoring
sap.hana.dbcc.roles::DBCCUser
5. Press F8 to deploy the role changes to SAP HANA.
Next Steps
(Optional) Create additional user accounts with the same roles as DCC_USR.
Context
Perform these steps for the new accounts you created, including:
DCC_ADM (administrator account)
DCC_COLLECTOR
DCC_USR (general user account)
If you created extra administrator or user accounts, update their passwords too.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
11
Procedure
1. In SAP HANA studio, right-click the SAP DCC host HANA system and select Add system with different
user.
2. Enter the user ID and temporary password of the account you are updating. For example,
DCC_COLLECTOR/AAA111aaa.
3. When the system prompts you, enter and confirm a new password.
Note
Make a note of each new passwordyou will need them for the tasks that follow.
Next Steps
Repeat the steps for all the accounts you want to update.
2.11
On every SAP HANA system you will monitor with SAP DB Control Center, create an SAPDBCC user account,
grant it monitoring privileges, and add the SAPDBCC account to the SQL connection configuration (SQLCC) in
SAP HANA XS.
Context
When you add (register) systems, SAP DCC uses the technical user account, SAPDBCC, to scan hosts for
systems that can be added and monitored.
If SAP DCC finds a system and you choose to add it, you are prompted to supply credentials for a monitoring
login that SAP DCC will use to collect high-level health data from the system's cockpit, including up/down
status and alert counts. (This monitoring collection occurs every minute.) Though you can use any SAP HANA
account that has the role sap.hana.admin.roles::Monitoring, SAP recommends that you use SAPDBCC as the
monitoring login. SAPDBCC has the required role (you set it up during installation and configuration), so you
do not have to set up another account.
Note
An expired password can disable monitoring functions. If you have password expiration policies in force,
SAP recommends that you configure exemptions for the SAPDBCC technical user account and for any
other accounts you use for monitoring, so that their passwords do not expire. For information on managing
password lifetime, see the SAP HANA Security Guide.
12
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
Procedure
1. In SAP HANA studio, right-click the
Security
Users
2. For the new user's name, enter SAPDBCC. Enter a temporary password such as AAA111aaa.
3. Select the Granted Roles tab and click +.
4. Select the sap.hana.admin.roles::Monitoring role and click Ok.
5. Press F8 to deploy the role changes to SAP HANA.
6. To update the temporary password:
1. Right-click the SAP HANA system and select Add system with different user.
2. Enter SAPDBCC and the temporary password you set in step 2 [page 13].
3. When the system prompts you, enter and confirm a new password for SAPDBCC.
7. Point your browser to:
http://<hana.host.name>:<port>/sap/hana/xs/admin
where the value of <port> depends on the connection protocol and the 2-digit SAP HANA instance
number:
For HTTP: 80<instance_number>
For HTTPS: 43<instance_number>
For example, use port 8000 for an HTTP connection to instance 00. Use port 4301 for an HTTPS
connection to instance 01.
8. Log in using SYSTEM or an equivalent account.
9. In the left pane, click XS Artifact Administration.
10. Click the arrows to expand
sap
hana
admin
dbcc .
Next Steps
Repeat these steps for other SAP HANA systems to be monitored.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
13
Prerequisites
Have updated passwords available for these accounts:
The SYSTEM account or an account with the same roles and privileges
DCC_COLLECTOR
Context
For more on SAP HANA XS and SQLCC, see the SAP HANA Administration Guide.
Procedure
1. Point your browser to:
http://<hana.host.name>:<port>/sap/hana/xs/admin
where the value of <port> depends on the connection protocol and the 2-digit SAP HANA instance
number:
For HTTP: 80<instance_number>
For HTTPS: 43<instance_number>
For example, use port 8000 for an HTTP connection to instance 00. Use port 4301 for an HTTPS
connection to instance 01.
2. Log in using SYSTEM or an equivalent account.
3. To set up a trust store:
1. In the left pane, click the arrows to expand
2. Click the Configuration menu icon
sap
hana
dbcc
(upper left).
14
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
sap
hana
dbcc
collections .
3. Click ScheduleCollections.xsjob.
4. Click Configuration (upper right).
5. Set the user to DCC_COLLECTOR and enter the DCC_COLLECTOR password.
6. Select the Active check box.
7. Click Save Job.
Look for a message at the bottom of the screen: Job successfully saved.
5. To enable maintenance, which cleans up the message queue:
1. In the left pane, click XS Artifact Administration.
2. Click the arrows to navigate to
sap
hana
dbcc
maintenance .
3. Click Maintenance.xsjob.
4. Set the user to DCC_COLLECTOR and enter the DCC_COLLECTOR password.
5. Select the Active check box.
6. Click Save Job.
Look for a message at the bottom of the screen: Job successfully saved.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
15
Prerequisites
Install the HANA_DBCC delivery unit and configure it. [page 5]
Obtain a web browser compatible with SAPUI5 [page 16].
Procedure
1. Point your web browser to:
http://<HANA_server>:<port>/sap/hana/dbcc
2. Log in.
If you plan to add or import systems to SAP DCC, log in using the DCC_ADM account or an account with
the same roles and privileges.
3.1
Browser Compatibility
16
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
Launchpad
The launchpad appears when you log in to SAP DB Control Center and provides access to monitoring and
management tools.
Table 2:
Options menu
Log out or display information about this login session. The drop-down displays the
name of the logged-in user.
Search tool
Tile group
Open the tile groups panel, where you can add tiles to the launchpad, remove them,
or rearrange them. You can also create and remove tile groups. (Every tile belongs to
a tile group.)
Default tiles
The default tiles appear in every copy of SAP DCC. They let you monitor and manage
systems known to SAP DCCclick a tile to start its app.
Launch System Directory tile - add systems to SAP DCC or remove them; add,
remove, or modify system groups. The tile displays the number of systems SAP
DCC is monitoring.
Launch Alert Monitor tile - review alerts generated by systems you are monitor
ing. The tile displays the total number of alerts and the number of high priority
(HP) and medium priority (MP) alerts.
Start & Stop Systems tile - start or shut down systems you are monitoring. The
tile displays the number of systems stopped for any reason.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
17
4.1
Context
Tiles are clickable and give you easy access to functions and information. For example:
Add the SAP HANA Developer Guide tile so you can open the guide in your browser.
Add the SAP HANA XS Administration Tool tile so you can launch the tool in your browser.
The launchpad displays tiles in labeled groups. When you add a tile, you assign it to a tile group.
Note
Tile groups are different from system groups. For information on system groups, see Add, Remove, and
Modify System Groups [page 25].
Procedure
(upper left).
18
(upper left) to return to the launchpad and see the new tiles and tile groups you
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
4.2
Move a tile from one tile group to another, rearrange tiles within a tile group, or take a tile or tile group off the
launchpad.
Procedure
(upper left).
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
19
System Directory
5.1
Add systems to SAP DB Control Center or remove them.You can add systems one at a time or import many
systems in a batch.
5.1.1
Adding a System
Add a system so you can monitor and manage it with SAP DB Control Center.
Prerequisites
Obtain the password for an SAP DCC administrator account such as DCC_ADM. For details on
administrator accounts, see Setting up Administrator Accounts [page 9].
Identify and if necessary create a user account for SAP DCC to use when it monitors this system. You can
use any SAP HANA account that has the role sap.hana.admin.roles::Monitoring. SAP recommends using
the technical user account, SAPDBCC, which is set up during installation and configuration and has the
required role. For more on the technical user account, see Setting up the Technical User Account on
Monitored Systems [page 12].
Context
When you add a system, you make it available to all users of SAP DCCit is not necessary for each user to add
the same systems.
SAP DCC needs HTTP access to run an initial system scan. All subsequent interactions are authenticated and
occur over HTTPS.
20
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
Procedure
1. Log in using an SAP DCC administrator account such as DCC_ADM.
You need administration permissions to add systems.
2. On the launchpad, click Launch System Directory.
3. On the System Directory screen, click Add System (lower right corner).
4. Enter the name of the host where the system you want to manage resides.
You might need to enter a fully qualified host name. For example, if a simple name like myhost does not
work, try myhost.mycompany.com.
5. Enter the HTTP port for the system you want to manage.
For example, 8000.
6. Click Next.
SAP DCC lists the systems available on the host.
7. Select at least one system from the list and click Add.
You can select multiple systems and register them at the same time.
8. Enter a login ID and password for SAP DCC to use for monitoring the system or systems you are adding.
For example, enter SAPDBCC and its password.
9. Click Apply.
In the system directory, you can see the list of registered systems, which includes those you just added.
5.1.2
Create an ASCII import file with the information SAP DB Control Center needs to import multiple systems at
one time.
Prerequisites
Identify one or more user accounts for SAP DCC to use for collecting monitoring data. For details, see Setting
up the Technical User Account on Monitored Systems [page 12].
Context
The import file must contain one line per system. On each line, include this information in this order, separated
by commas:
The name of the system's host
The system's HTTP or HTTPS port
The system ID
The authentication type: basic
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
21
(Optional) The monitoring login control center will use to authenticate with the system. For example,
SAPDBCC.
(Optional) The monitoring login's password
The syntax is:
<hostname.fully.qualified.domain.name>,<port_number>,<systemID>,basic,
[<loginID>],[<password>]
For example:
#Systems in Bedrock
myserver.mycompany.com,8000,HD1,basic
servergold.mycompany.com,8002,HD2,basic,SAPDBCC,r0cksr0ck
serverblue.mycompany.com,4283,ES1,basic,fred,p3bbles
When SAP DCC reads an import file, it ignores:
Lines that begin with # (comments)
Lines that do not end with a return
Be sure to press Enter after the last line of your import file.
Procedure
1. Create an import file in the comma-separated value (CSV) format described above.
Note
When you omit login IDs or passwords from an import file, SAP DCC prompts you during the import
processbut it prompts you for only one login/password pair, which it tries to use for each system
selected for import. This makes it easy to import multiple systems together when they use the same
login ID and password. If you are importing multiple systems with unique login ID/password
combinations, it is simplest to include all the login credentials in the import file.
2. Save the import file in a location accessible to SAP DCC.
Next Steps
Use the import file to add systems to SAP DCC. [page 23]
22
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
5.1.3
Add two or more systems to SAP DB Control Center so you can monitor and manage them.
Prerequisites
Create an import file. [page 21]
Obtain the password for an SAP DCC administrator account such as DCC_ADM. For details on
administrator accounts, see Setting up Administrator Accounts [page 9].
Procedure
1. Log in using an SAP DCC administrator account such as DCC_ADM.
You need administration permissions to add systems.
2. On the launchpad, click Launch System Directory.
3. On the System Directory screen, click Import Systems (lower right corner).
4. Click Browse, find the import file you created, and select it.
5. Click Load File (lower right corner).
Watch the discovery process. SAP DCC searches for the systems listed in the import file and displays:
A blue 'Discovered' bar for each system that is ready to import
A green 'Already Registered' bar for each system that was added previously
A red 'Error' bar with an error message for each system that cannot be found or that is not ready to
import
6. Check the box next to each system you want to add that has a blue 'Discovered' bar and click Import.
Note
When you omit login information from the import file, ensure that all the systems you selected for
import use the same login ID and password. (Perform a separate import for each group of systems that
share login credentials.)
Results
The systems you imported appear in the system directory.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
23
5.1.4
Removing a System
Procedure
1. On the launchpad, click Launch System Directory.
The system directory lists all the systems known to SAP DCC.
2. Click a row to select a system.
If the list of systems is long, use these tools provided in the dialog to search, filter, or sort the list.
Table 3:
Search
Enter a full or partial system name in the search box at the top of the screen and click the
magnifying glass
string.
. The list is reduced to show only systems that match your search
The search box accepts certain regular expressions. For details, see http://
www.w3schools.com/jsref/jsref_obj_regexp.asp
Click the X
Filter by system group
in the search box to cancel the search and restore the full list of systems.
If you have assigned systems to groups, you can filter the system list by group. At the top
of the screen, click the filter
to display and click Ok.
Ok.
Filter by system type
You can filter the list by system type (for example, display only SAP HANA systems). At
the top of the screen, click the filter
want to display and click Ok.
3. Click Remove System in the lower right corner of the screen, then click Yes to confirm the removal.
The selected system disappears from the list.
Note
You cannot remove the SAP HANA host system.
24
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
5.2
System groups let you label sets of systems and use the labels (group names) to control which systems are
displayed on certain screens.
For example, you might create a system group for each department or city with monitored systems (Finance,
Sales, and Development, or Boston, Amsterdam, and Seoul).
On SAP DB Control Center screens that allow you to filter systems by group (such as the system directory),
you can choose a system group to narrow the list of systems displayed.
5.2.1
Add a system group to SAP DB Control Center and add systems to the group.
Prerequisites
Add systems to SAP DCC. You can add one at a time [page 20] or import several systems together [page 23].
Note
System groups are different from tile groups. For information on tile groups, see Adding Launchpad Tiles
and Tile Groups [page 18].
Procedure
1. On the launchpad, click Launch System Directory.
2. Click System Groups (on the left, above the systems list).
3. Click Create Group (lower right).
4. Enter a name for the group, add a description if you wish, and click Save Changes.
5. Select systems to include in the new group and click Add.
6. Click Save Changes again.
The new group appears in the Groups list.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
25
5.2.2
Context
Deleting a system group does not delete the systems that belong to the group.
Procedure
1. On the launchpad, click Launch System Directory.
2. Click System Groups (on the left, above the systems list).
3. Select a system group to remove.
If the list of groups is long, use the Search box to find the group you want. Enter a full or partial name and
click the magnifying glass
Click the blue X
. The list is reduced to show only groups that match your search string.
in the search box to cancel the search and restore the full list of groups.
4. Click Delete Group in the lower right corner of the screen, then click Yes to confirm the removal.
The selected system group disappears from the list.
5.2.3
Change the name, owner, or description of a system group, or add or remove systems.
Procedure
1. On the launchpad, click Launch System Directory.
2. Click System Groups (on the left, above the systems list).
3. Select a system group to modify.
If the list of groups is long, use the Search box to find the group you want. Enter a full or partial name and
click the magnifying glass
Click the blue X
. The list is reduced to show only groups that match your search string.
in the search box to cancel the search and restore the full list of groups.
4. Change the system group's name or description and click Save Changes.
26
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
27
Alert Monitor
Context
Tip
The Launch Alert Monitor tile tells you how many total high priority (HP) and medium priority (MP) alerts
have been reported, and how many of each.
Procedure
1. On the launchpad, click Launch Alert Monitor.
On the Alert Monitor screen, you see a list of systems on the left that shows how many alerts each one
has.
2. Click a system to display more information.
If the monitored system supports drilling down into alerts, you can click the listed alerts to display further
details.
28
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
Health Monitor
Context
Tip
The Monitor Enterprise Health tile tells you how many systems are running.
Procedure
1. On the launchpad, click Monitor Enterprise Health.
The health monitor displays a list of systems with health indicators for availability, capacity, performance,
and alerts.
2. (Optional) Use the filter
3. Hover your mouse over a health indicator icon (an arrow, for example) to see an explanation of what it
means.
4. Click in the System, Availability, Capacity, Performance, or Alerts column for a system to display
information provided by the system's cockpit. The links available vary; some systems do not provide links
for every column.
You may be prompted to log in to the system.
7.1
Connecting to a Cockpit
Log in to a cockpit (management console) to get more information about the availability, capacity,
performance, and alert status of the system managed by the cockpit.
Prerequisites
Add a system [page 20] to SAP DB Control Center.
Obtain a login ID and password for a database on the system managed by the cockpit. These credentials
will allow you to log in to the cockpit.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
29
Procedure
1. In the Enterprise Health Monitor, click a system name to drill down into that system's cockpit.
If the list of systems is long, use these tools provided in the dialog to search, filter, or sort the list.
Table 4:
Search
Enter a full or partial system name in the search box at the top of the screen and click the
magnifying glass
string.
. The list is reduced to show only systems that match your search
The search box accepts certain regular expressions. For details, see http://
www.w3schools.com/jsref/jsref_obj_regexp.asp
Click the X
Filter by system group
in the search box to cancel the search and restore the full list of systems.
If you have assigned systems to groups, you can filter the system list by group. At the top
of the screen, click the filter
to display and click Ok.
Ok.
Filter by system type
You can filter the list by system type (for example, display only SAP HANA systems). At
the top of the screen, click the filter
want to display and click Ok.
30
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
Context
SAP DCC starts and stops systems using the SAP host agent, which is included in a typical installation. If the
agent is missing, you cannot start or stop the system from SAP DCC.
Tip
The Start & Stop Systems tile tells you if any systems are stopped.
Procedure
1. On the launchpad, click Start & Stop Systems.
On the Start & Stop Systems screen, you see a list of systems that shows the state of each one (running,
shutting down, stopped, or unknown).
2. If the list is long, focus on systems of interest by clicking Running Systems or Stopped Systems at the top
of the screen, or use the search and filter tools.
Table 5:
Search
Enter a full or partial system name in the search box at the top of the screen and click the
magnifying glass
string.
. The list is reduced to show only systems that match your search
The search box accepts certain regular expressions. For details, see http://
www.w3schools.com/jsref/jsref_obj_regexp.asp
Click the X
Filter by system group
in the search box to cancel the search and restore the full list of systems.
If you have assigned systems to groups, you can filter the system list by group. At the top
of the screen, click the filter
to display and click Ok.
Ok.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
31
You can filter the list by system type (for example, display only SAP HANA systems). At
the top of the screen, click the filter
want to display and click Ok.
3. Authenticate with a system before you try to start or stop it. Click the system's checkbox and click
Authenticate (lower right corner of the screen).
4. (Optional) Click a system name to drill down into that cockpit for more information.
5. To start a stopped system, click its checkbox and click Start (lower right corner of the screen).
After a minute or so, the state of the system changes to RUNNING.
6. To stop a running system, click its checkbox and click Stop (lower right corner of the screen). Click Yes to
confirm.
The state of the system changes to SHUTTING DOWN and after half a minute or so to STOPPED.
32
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
There are several types of licenses available for SAP HANA. Depending on the license type of your SAP HANA
installation, some of the features and tools that are described in the SAP HANA platform documentation may
only be available via the SAP HANA options, which may be released independently of an SAP HANA Platform
Support Package Stack (SPS). Although various features included in SAP HANA options are cited in the SAP
HANA platform documentation, customers who only purchased the license for the base edition of the SAP
HANA platform do not have the right to use features included in SAP HANA options, because these features
are not included in the license of the base edition of the SAP HANA platform. For customers to whom these
license restrictions apply, the use of features included in SAP HANA options in a production system requires
purchasing the corresponding software license(s) from SAP. The documentation for the SAP HANA optional
components is available in SAP Help Portal at http://help.sap.com/hana_options. For more information, see
also SAP Note 2091815 - SAP HANA Options
If you have additional questions about what your particular
license provides, or wish to discuss licensing features available in SAP HANA options, please contact your SAP
account team representative.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
33
Coding Samples
Any software coding and/or code lines / strings ("Code") included in this documentation are only examples and are not intended to be used in a productive system
environment. The Code is only intended to better explain and visualize the syntax and phrasing rules of certain coding. SAP does not warrant the correctness and
completeness of the Code given herein, and SAP shall not be liable for errors or damages caused by the usage of the Code, unless damages were caused by SAP
intentionally or by SAP's gross negligence.
Accessibility
The information contained in the SAP documentation represents SAP's current view of accessibility criteria as of the date of publication; it is in no way intended to be
a binding guideline on how to ensure accessibility of software products. SAP in particular disclaims any liability in relation to this document. This disclaimer, however,
does not apply in cases of wilful misconduct or gross negligence of SAP. Furthermore, this document does not result in any direct or indirect contractual obligations of
SAP.
Gender-Neutral Language
As far as possible, SAP documentation is gender neutral. Depending on the context, the reader is addressed directly with "you", or a gender-neutral noun (such as
"sales person" or "working days") is used. If when referring to members of both sexes, however, the third-person singular cannot be avoided or a gender-neutral noun
does not exist, SAP reserves the right to use the masculine form of the noun and pronoun. This is to ensure that the documentation remains comprehensible.
Internet Hyperlinks
The SAP documentation may contain hyperlinks to the Internet. These hyperlinks are intended to serve as a hint about where to find related information. SAP does
not warrant the availability and correctness of this related information or the ability of this information to serve a particular purpose. SAP shall not be liable for any
damages caused by the use of related information unless damages have been caused by SAP's gross negligence or willful misconduct. All links are categorized for
transparency (see: http://help.sap.com/disclaimer).
34
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
PUBLIC
2015 SAP SE or an SAP affiliate company. All rights reserved.
35
www.sap.com/contactsap