Professional Documents
Culture Documents
Advanced Process Control Improves Operation of A Polypropylene Unit - HPI - Sep 2013
Advanced Process Control Improves Operation of A Polypropylene Unit - HPI - Sep 2013
1 de 6
http://www.hydrocarbonprocessing.com/Article/3250812/Advanced-pr...
2 de 6
http://www.hydrocarbonprocessing.com/Article/3250812/Advanced-pr...
system (DCS) and then making the subsequent DCS configuration changes.
TASNEE assigned a project team made up of operations experts, process engineers, process control gurus, DCS experts
and IT support. The project team was overseen by a dedicated project manager who also acted as the technical lead. The
project team was involved in all aspects of the implementation. Within the first three months, the majority of the APC
solution was in place and commissioned. Improvements in process stability and product quality were noted shortly after
commissioning began.
To improve reactor stability, the reactor pressure controller was commissioned, along with the polymer production rate
controller. For the next four months, the project team focused on fine tuning the controller and installing and testing of
the automated transitions. The implementation was completed seven months after the kickoff meeting. The performance
test and audit took an additional three months. The project exceeded all performance criteria outlined in the project
objectives.
Initial challenges
This polymer APC project had to overcome some difficult issues related to the process while remaining compatible with
overall objectives. One issue was that the process makes multiple products with varying catalyst activities (due to
fluctuating hydrogen concentration) in the reaction loop. This introduced a high degree of non-linearity in the gains and
the dynamics.
Another issue was that some of the controlled variables were open loop unstable. This required that the controller
respond in a quick and sufficient manner so as not to introduce further instabilities. The team had to be aware that the
process was sensitive to impurities in the feedstock and to those generated internally. The impurities tended to affect the
catalyst activity and thus the response of the process. Further, the APC solution had to be programmed in a way to
recognize that the steady-state location of process variables for a product will vary from run to run.
Another red flag to consider was that some of the final product properties that are important to the end user are not
characterized by the parameters measured by the lab or controlled in the process. Clear lines of responsibility also had to
be established, so that appropriate technology transfer to the operations and technical groups for maintenance and
support could be undertaken. Fortunately, the analyzer performance issues and lab result variability were flagged early in
the project and the project team was able to offer solid technical solutions.
Results achieved
The main project objectives were to increase production rate, improve process stability (reduce off-spec) and improve
product quality or Cpk. APC solutions for polymers achieve these objectives by implementing a nonlinear multivariable
control solution (Fig. 1). An important aspect of reactor stability is the ability to control critical process parameters such
as reactor pressure and reactor temperature. Fig. 2 illustrates the pressure control improvement for one of the polymer
lines.
3 de 6
http://www.hydrocarbonprocessing.com/Article/3250812/Advanced-pr...
In addition to reactor stability, improvement in the product quality was an important objective. The product quality
improvement was measured by the Cpk number. This is a statistical measure of the plants capability to operate between
product limits and near the designated product target. For this undertaking, Cpk for MFR was a project objective. In the
4 de 6
http://www.hydrocarbonprocessing.com/Article/3250812/Advanced-pr...
end, APC implementation resulted in all products exceeding the Cpk objective.
Improvements in other product properties, including XS, were also observed. Fig. 3 shows the quality improvement for
one of the product grades.
5 de 6
http://www.hydrocarbonprocessing.com/Article/3250812/Advanced-pr...
model predictive control solution is maintained by TASNEE personnel so that the expected results will continue to be
delivered. Before implementation of this solution, TASNEE was focused on improving its lab quality control performance.
Implementing this APC solution has allowed TASNEE to reduce the number of lab samples required. This has reduced
the lab workload, resulting in more consistent results and improved product quality control. HP
LITERATURE CITED
1 CB&I, Parallel configuration: Homopolymers and random copolymers. Available at: www.cbi.com/images/uploads
/Config_Parallel_New_3_788x450.gif.
The authors
Hanif Poorkar is a senior process engineer for TASNEE in Jubail, Saudi Arabia. He has been with TASNEE for eight
years. Mr. Poorkar has worked with different technologies associated with PP processes throughout his 16 year career.
He has a petrochemical engineering degree from Dr. Babasaheb Ambedkar Technological University in Lonere, India,
and an MBA degree from Karnataka University in Dharwad, India.
Mohammed Al-Zahrani is the APC lead engineer for TASNEE in Jubail, Saudi Arabia. He has been with TASNEE for
three years. Mr. Al-Zahrani has worked with different petrochemical polymer process technologies throughout his nine
year career. He has a bachelor degree in chemical engineering. Mr. Al-Zahrani has two main priorities: assisting the
process engineering polymer department and leading APC projects in the polyethylene (PE) plants within the TASNEE
complex.
Hamad Al-Shbrain is the polymer process engineering manager for TASNEE in Jubail, Saudi Arabia. His
responsibilities include activities within TASNEEs low density polyethylene (LDPE), high density polyethylene (HDPE)
and PP plants. He is a chemical engineering graduate with more than 16 years of experience.
Kami Sefidrou is director of operations for Rockwell Automation in Houston, Texas. He has over 35 years of
experience implementing APC solutions. Prior to joining Rockwell, he managed Aspen Technologys polymer group. His
experience also includes process control positions with BAPCO in Bahrain, NOVA Chemicals and Syncrude Canada. He
has a masters degree in process control and a bachelors degree in chemical engineering , both from the University of
Wales, UK.
Brian Lines is a senior technical consultant at Applied Manufacturing Technologies (AMT) in Houston, Texas. Brian
has over 34 years of experience in process operations, process design and APC. Mr. Lines has held positions at Pavilion
Technologies, Aspentech, NOVA Chemicals, DuPont Canada and Syncrude Canada. Brian holds a number of US patents
in non-linear model predictive control. Brian has a chemical engineering degree from the University of Waterloo in
Canada.
Asghar Rezapour
12.10.2014
if iranian petrochemical like JAM and NAVID ZAR CHIMI invest in APC we dont have problem in high speed bopp film
line.
gopa
09.21.2013
Dear Authors: Good to learn from the case study that APC yielded beneits in terms increasd (2%) production resulted in
6 months RoI. I have two queries, viz. a) Irrespective of OpEx or CapEx, what was the investment made on APC
implementation, in absolute $ terms, during that particular implementation period? b) What was the involvement of
original process licensors of PP process technology to the Tasnee, involved fully or no involvement, while selected vendor
executing APC technology.
Thank you guys, anticipating response to learn APC further. Best Regards, Gopa. S.
SHAILENDRA V ASODEKAR
6 de 6
http://www.hydrocarbonprocessing.com/Article/3250812/Advanced-pr...
09.10.2013
Well done Team!
This is one of the difficult situations in critical processes to see problem areas, efforts to resolve and solution providers to
reach grand success. What could be the best example other than this. I have worked with Mr Hanif in Tasnee and I am
proud to know his new milestone. It is always see as challenge to map process dynamics including weather changes from
0 deg to 55 degC, feed impurities, parameters beyond control of client. But it looks all internal support divisions as well
strived hard to meet those objectives. Kudos to the creation, innovation and completion!
Prince
09.08.2013
Kudos Guys!!!.... Great Paper...A respectable Feather in the the Tasnee's Technology Cap.