Professional Documents
Culture Documents
UETR Interpretation
UETR Interpretation
Uplink Signal-to-Interference Ratio (SIR) per radio link set (RL-Set), measured
on Dedicated Physical Control Channel (DPCCH) after radio link combination
in the Node B.
NodeB measures the Pilot Bit power of DPCCH and calculates the Signal-to
Interference ratio (SIR) per RL-set. This is compared to SIRtarget and based
on the result TPC sent to UE (increase/decrease TxPwr).
Low SIR triggers PC algorithm to order changing UeTxPwr for higher value ->
Increase of UL Interference.
SIR ERROR
SIRerror shows the gap between the assigned SIRtarget and measured SIR.
Value of SIRerror per connection shows how well the SRNC is able to adjust
UE Tx Pwr, which shows the accuracy of Power Control.
SIR should follow the SIRtarget -> SIRerror should present 0 value.
The higher TCP value indicates worse RF conditions and higher DL-code Pwr
load since pilot channel has to transmit with higher power.
BLER is long-time average block error rate calculated from transport blocks.
To convert the reported Ec/Io and RSCP values use following equations:
Ec/Io = -24 dB + (Ec/IoREPORTED / 2)
RSCP = -115 dBm + RSCPREPORTED
UE Tx POWER
The lower the UE Tx power the lower the UL Interference since UE is not
ordered by PC algorithm to use high power.