Professional Documents
Culture Documents
QTP Scripts
QTP Scripts
QTP Scripts
com
Advanced QTP
(In VBScript Orientation)
1) Introduction
2) Comments
3) VB Script Variables
5) VB Script Operators
6) Input/Output Operations
7) Constants
8) Conditional Statements
9) General Examples
11)Procedures
12)Built-In Functions
14)Errors
16)Test Requirements
17) Solutions
www.gcreddy.com
Introduction
When a VBScript is inserted into a HTML document, the Internet browser will read
the HTML and interpret the VBScript. The VBScript can be executed immediately, or
at a later event.
Microsoft Visual Basic Scripting Edition brings active scripting to a wide variety of
environments, including Web client scripting in Microsoft Internet Explorer and Web
server scripting in Microsoft Internet Information Service.
That is, when a script arrives at your computer, WSH plays the part of the host — it
makes objects and services available for the script and provides a set of guidelines
within which the script is executed. Among other things, Windows Script Host
manages security and invokes the appropriate script engine
Windows Script Host is built into Microsoft Windows 98, 2000, and Millennium
Editions and higher versions.
A Windows script is a text file. We can create a script with any text editor as long as
we save our script with a WSH-compatible script extension (.js, vbs, or .wsf).
The most commonly available text editor is already installed on our computer —
Notepad. We can also use your favorite HTML editor, VbsEdit, Microsoft Visual C++,
or Visual InterDev.
1.Start Notepad.
2.Write your script. For example purposes, type Msgbox "Hello VB Script"
3.Save this text file with a .vbs extension (instead of the default .txt extension). For
example, Hello.vbs
5.Windows Script Host invokes the VB Script engine and runs your script. In the
example, a message box is displayed with the message "Hello VB Script"
Scripts are often embedded in Web pages, either in an HTML page (on the client
side) or in an ASP page (on the server side).
In the case of a script embedded in an HTML page, the engine component that
interprets and runs the script code is loaded by the Web browser, such as Internet
Explorer.
In the case of a script embedded in an ASP page, the engine that interprets and runs
the script code is built into Internet Information Services (IIS).
Windows Script Host executes scripts that exist outside an HTML or ASP page and
that stand on their own as text files.
Generally, we write scripts in either Microsoft JScript or VBScript, the two script
engines that ship with Microsoft Windows 98, 2000 and Millennium Editions.
We can use other script engines, such as Perl, REXX, and Python, with Windows
Script Host.
A stand-alone script written in JScript has the .js extension; a stand-alone script
written in VBScript has the .vbs extension. These extensions are registered with
Windows. When we run one of these types of files, Windows starts Windows Script
Host, which invokes the associated script engine to interpret and run the file.
Comments
2.1 Syntax
Rem comment (After the Rem keyword, a space is required before comment.)
Or
Select block of statement and use short cut key Ctrl + M (for comment)
Select comment block and use short cut key Ctrl + Shift + M (for uncomment)
2.3 Example
VB Script Variables
We declare variables explicitly in our script using the Dim statement, the Public
statement, and the Private statement.
For example:
Dim city
Dim x
We declare multiple variables by separating each variable name with a comma. For
Example:
We can also declare a variable implicitly by simply using its name in our script. That
is not generally a good practice because we could misspell the variable name in one
or more places, causing unexpected results when our script is run. For that reason,
the Option Explicit statement is available to require explicit declaration of all
variables.
The Option Explicit statement should be the first statement in our script.
Variable names follow the standard rules for naming anything in VBScript. A variable
name:
o Must begin with an alphabetic character.
o Cannot contain an embedded period.
o Must not exceed 255 characters.
When we declare a variable within a procedure, only code within that procedure can
access or change the value of that variable.
The lifetime of a script-level variable extends from the time it is declared until the
time the script is finished running.
At procedure level, a variable exists only as long as you are in the procedure.
The variable is on the left side of the expression and the value you want to assign to
the variable is on the right.
For example:
A = 200
City = “Hyderabad”
X=100: Y=200
Array variables and scalar variables are declared in the same way, except that the
declaration of an array variable uses parentheses () following the variable name.
Example:
Dim A(3)
Although the number shown in the parentheses is 3, all arrays in VBScript are zero-
based, so this array actually contains 4 elements.
We assign data to each of the elements of the array using an index into the array.
Beginning at zero and ending at 4, data can be assigned to the elements of an array
as follows:
A(0) = 256
A(1) = 324
A(2) = 100
A(3) = 55
Similarly, the data can be retrieved from any element using an index into the
particular array element you want.
For example:
SomeVariable = A(4)
In a two-dimensional array, the first number is always the number of rows; the
second number is the number of columns.
We can also declare an array whose size changes during the time our script is
running. This is called a dynamic array.
The array is initially declared within a procedure using either the Dim statement or
using the ReDim statement.
However, for a dynamic array, no size or number of dimensions is placed inside the
parentheses.
For example:
Dim MyArray()
ReDim AnotherArray()
To use a dynamic array, you must subsequently use ReDim to determine the number
of dimensions and the size of each dimension.
In the following example, ReDim sets the initial size of the dynamic array to 25. A
subsequent ReDim statement resizes the array to 30, but uses the Preserve keyword
to preserve the contents of the array as the resizing takes place.
ReDim MyArray(25)
There is no limit to the number of times we can resize a dynamic array, although if
we make an array smaller, we lose the data in the eliminated elements.
VBScript has only one data type called a Variant. A Variant is a special kind of data
type that can contain different kinds of information, depending on how it is used.
Because Variant is the only data type in VBScript, it is also the data type returned by
all functions in VBScript.
Beyond the simple numeric or string classifications, a Variant can make further
distinctions about the specific nature of numeric information. For example, we can
have numeric information that represents a date or a time. When used with other
date or time data, the result is always expressed as a date or a time. We can also
have a rich variety of numeric information ranging in size from Boolean values to
huge floating-point numbers. These different categories of information that can be
contained in a Variant are called subtypes. Most of the time, we can just put the kind
of data we want in a Variant, and the Variant behaves in a way that is most
appropriate for the data it contains.
The following table shows subtypes of data that a Variant can contain.
Subtype Description
Empty Variant is uninitialized. Value is 0 for numeric variables or a zero-length string
("") for string variables.
Null Variant intentionally contains no valid data.
Boolean Contains either True or False.
Byte Contains integer in the range 0 to 255.
Integer Contains integer in the range -32,768 to 32,767.
Currency -922,337,203,685,477.5808 to 922,337,203,685,477.5807.
Long Contains integer in the range -2,147,483,648 to 2,147,483,647.
Single Contains a single-precision, floating-point number in the range -3.402823E38
to -1.401298E-45 for negative values; 1.401298E-45 to 3.402823E38 for positive
values.
Double Contains a double-precision, floating-point number in the range
-1.79769313486232E308 to -4.94065645841247E-324 for negative values;
4.94065645841247E-324 to 1.79769313486232E308 for positive values.
Date (Time) Contains a number that represents a date between January 1, 100 to
December 31, 9999.
String Contains a variable-length string that can be up to approximately 2 billion
characters in length.
Object Contains an object.
Error Contains an error number.
We can use conversion functions to convert data from one subtype to another. In
addition, the VarType function returns information about how your data is stored
within a Variant.
VB Script Operators
Operators are used for performing mathematical, comparison and logical operations.
VBScript has a full range of operators, including arithmetic operators, comparison
operators, concatenation operators, and logical operators.
When several operations occur in an expression, each part is evaluated and resolved
in a predetermined order called operator precedence.
We can use parentheses to override the order of precedence and force some parts of
an expression to be evaluated before others.
Operations within parentheses are always performed before those outside. Within
parentheses, however, standard operator precedence is maintained.
When expressions contain operators from more than one category, arithmetic
operators are evaluated first, comparison operators are evaluated next, and logical
operators are evaluated last.
Comparison operators all have equal precedence; that is, they are evaluated in the
left-to-right order in which they appear.
Arithmetic and logical operators are evaluated in the following order of precedence.
Operator Description
1) Exponentiation Operator (^) Raises a number to the power of an exponent
2) Multiplication Operator (*) Multiplies two numbers.
3) Division Operator (/) Divides two numbers and returns a floating-point
result.
4) Integer Division Operator (\) Divides two numbers and returns an integer result.
5) Mod Operator Divides two numbers and returns only the remainder.
6) Addition Operator (+) Sums two numbers.
7) Subtraction Operator (-) Finds the difference between two numbers or indicates
the negative value of a numeric expression.
Operator Description
1) = (Equal to) Used to compare expressions.
2) <> (Not equal to) Used to compare expressions.
Operator Description
1) Addition Operator (+) Sums two numbers
If Then
1) Both expressions are numeric Add.
2) Both expressions are strings Concatenate.
3) One expression is numeric and the Add.
other is a string
2) Concatenation Forces string concatenation of two expressions.
Operator (&)
Input/Output Operations
Displays a prompt in a dialog box, waits for the user to input text or click a button,
and returns the contents of the text box.
Example:
Dim Input
Input = InputBox("Enter your name")
MsgBox ("You entered: " & Input)
Displays a message in a dialog box, waits for the user to click a button, and returns a
value indicating which button the user clicked.
Example:
Dim MyVar
MyVar = MsgBox ("Hello World!", 65, "MsgBox Example")
VB Script Constants
A constant is a meaningful name that takes the place of a number or string and
never changes.
We create user-defined constants in VBScript using the Const statement. Using the
Const statement, we can create string or numeric constants with meaningful names
and assign them literal values.
Const statement
Example:
Represent Date literals and time literals by enclosing them in number signs (#).
We declare multiple constants by separating each constant name and value with a
comma. For example:
Const price= 100, city= “Hyderabad”, x= 27
Conditional Statements
We can control the flow of our script with conditional statements and looping
statements.
Using conditional statements, we can write VBScript code that makes decisions and
repeats actions. The following conditional statements are available in VBScript:
1) If…Then…Else Statement
2) Select Case Statement
To run only one statement when a condition is True, use the single-line syntax for
the If...Then...Else statement.
Dim myDate
myDate = #2/13/98#
If myDate < Now Then myDate = Now
To run more than one line of code, we must use the multiple-line (or block) syntax.
This syntax includes the End If statement.
Dim x
x= 20
If x>10 Then
msgbox "Hello G.C.Reddy"
msgbox "x value is: "&x
msgbox "Bye Bye"
End If
Dim x
x= Inputbox (" Enter a value")
If x>100 Then
Msgbox "Hello G.C.Reddy"
Msgbox "X is a Big Number"
Msgbox "X value is: "&X
Else
Msgbox "GCR"
Msgbox "X is a Small Number"
Msgbox "X value is: "&X
End If
Else
Msgbox "Hello Sir"
Msgbox "X is a Grand Number"
End If
End If
End If
Example:
End If
End If
End If
End If
Option explicit
Dim x,y, Operation, Result
x= Inputbox (" Enter x value")
y= Inputbox ("Enter y value")
Operation= Inputbox ("Enter an Operation")
Case "add"
Result= cdbl (x)+cdbl (y)
Msgbox "Hello G.C.Reddy"
Msgbox "Addition of x,y values is "&Result
Case "sub"
Result= x-y
Msgbox "Hello G.C.Reddy"
Msgbox "Substraction of x,y values is "&Result
Case "mul"
Result= x*y
Msgbox "Hello G.C.Reddy"
Msgbox "Multiplication of x,y values is "&Result
Case "div"
Result= x/y
Msgbox "Hello G.C.Reddy"
Msgbox "Division of x,y values is "&Result
Case "mod"
Result= x mod y
Msgbox "Hello G.C.Reddy"
Msgbox "Mod of x,y values is "&Result
Case "expo"
Result= x^y
Msgbox "Hello G.C.Reddy"
Msgbox"Exponentation of x,y values is "&Result
Case Else
Msgbox "Hello G.C.Reddy"
msgbox "Wrong Operation"
End Select
8.3.1 Write a program for finding out whether the given year is a leap year
or not?
Dim xyear
xyear=inputbox ("Enter Year")
8.3.2 Write a program for finding out whether the given number is, Even
number or Odd number?
Dim num
num=inputbox ("Enter a number")
sum= Cdbl (num1) + Cdbl (num2) 'if we want add two strings conversion
require
msgbox ("Sum is " &sum)
Dim p,t, r, si
p=inputbox ("Enter Principle")
t=inputbox ("Enter Time")
r=inputbox ("Enter Rate of Interest")
si= (p*t*r)/100 ' p= principle amount, t=time in years, r= rate of interest
msgbox ("Simple Interest is " &si)
8.3.5 Read Four digit number, calculate & display the sum of the number or
display Error message if the number is not a four digit number?
8.3.6 Read any Four-digit number and display the number in reverse order?
Dim num,rev
num= inputbox("Enter a number")
If len(num)=4 Then
num= left(num,1)
8.3.7 Read 4 subjects marks; calculate the Total marks and grade?
(a) If average marks Greater than or equal to 75, grade is Distinction
b) If average marks Greater than or equal to 60 and less than 75 , then grade is
First
c) If average marks Greater than or equal to 50 and less than 60 , then grade is
Second
d) If average marks Greater than or equal to 40 and less than 50 , then grade is
Third
e) Minimum marks 35 for any subject, otherwise 'no grade fail')
If cdbl(e) >=35 and cdbl(m) >=35 and cdbl(p) >=35 and cdbl(c) >=35 and tot
>=300 Then
msgbox "Grade is Distinction"
else If cdbl(e) >=35 and cdbl(m) >=35 and cdbl(p) >=35 and cdbl(c) >=35 and tot
>=240 and tot<300 Then
msgbox "Grade is First"
else If cdbl(e) >=35 and cdbl(m) >=35 and cdbl(p) >=35 and cdbl(c) >=35 and tot
>=200 and tot<240 Then
msgbox "Grade is Second"
else If cdbl(e) >=35 and cdbl(m) >=35 and cdbl(p) >=35 and cdbl(c) >=35 and tot
>=160 and tot<200 Then
msgbox "Grade is Third"
else
msgbox "No Grade, Fail"
End If
End If
End If
End If
Dim num,n
n=Inputbox ("Enter a Vaule")
For num= 1 to n step 2
msgbox num
Next
Dim num,n
n=Inputbox ("Enter a Vaule")
For num= 2 to n step 2
msgbox num
Next
Dim num,n
n=Inputbox ("Enter a Vaule")
For num=n to 1 step -1
msgbox num
Next
num=num+1
Wend
msgbox sum
8.16 Verify weather the entered 10 digit value is a numeric value or not?
Dim a,x,y,z,num
num=Inputbox ("Enter a Phone Number")
If isnumeric (d1) = "True" and isnumeric (d2) = "True" and isnumeric (d3) = "True"
and isnumeric (d4) = "True"and isnumeric (d5) = "True"and isnumeric (d6) =
"True"and isnumeric (d7) = "True"and isnumeric (d8) = "True"and isnumeric (d9) =
"True"and isnumeric (d10) = "True" Then
msgbox "It is a Numeric Value"
else
Msgbox "It is NOT Numeric"
End If
8.17 Verify weather the entered value is a 10 digit value or not and Numeric
value or not? (Using multiple if conditions)
Dim a,x,y,z,num
num=Inputbox ("Enter a Phone Number")
If isnumeric (d1) = "True" and isnumeric (d2) = "True" and isnumeric (d3) = "True"
and isnumeric (d4) = "True"and isnumeric (d5) = "True"and isnumeric (d6) =
"True"and isnumeric (d7) = "True"and isnumeric (d8) = "True"and isnumeric (d9) =
"True"and isnumeric (d10) = "True" Then
msgbox "It is a Numeric Value"
End If
End If
The statements are repeated either while a condition is True or until a condition
becomes True.
a) Do While condition
Statements
-----------
-----------
Loop
Or, we can use this below syntax:
Example:
Dim x
Do While x<5 x=x+1
Msgbox "Hello G.C.Reddy"
Msgbox "Hello QTP"
Loop
b) Do
Statements
-----------
-----------
Loop While condition
Example:
Dim x
x=1
Do
Msgbox "Hello G.C.Reddy"
Msgbox "Hello QTP"
x=x+1
Loop While x<5
c) Do Until condition
Statements
-----------
-----------
Loop
Or, we can use this below syntax:
Example:
Dim x
Do Until x=5 x=x+1
Msgbox "G.C.Reddy"
Msgbox "Hello QTP"
Loop
Or, we can use this below syntax:
d) Do
Statements
-----------
-----------
Loop Until condition
Or, we can use this below syntax:
Example:
Dim x
x=1
Do
Msgbox “Hello G.C.Reddy”
Msgbox "Hello QTP"
x=x+1
Loop Until x=5
Syntax:
While condition
Statements
-----------
-----------
Wend
Example:
Dim x
x=0
While x<5 x=x+1
msgbox "Hello G.C.Reddy"
msgbox "Hello QTP"
Wend
Example:
Dim x
For x= 1 to 5 step 1
Msgbox "Hello G.C.Reddy"
Next
Syntax:
Example: (1
Example: (2
MyArray = Array("one","two","three","four","five")
For Each element In MyArray
msgbox element
Next
11.1 read a number and verify that number Range weather in between 1 to
100 or 101 to 1000?
Option explicit
Dim a,x
a=Inputbox ("Enter a Vaule")
a=cdbl(a)
If a<= 100 Then
For x= 1 to 100
If a=x Then
msgbox "a is in between 1 to 100 range"
End If
Next
else
For x= 101 to 1000
If a=x Then
msgbox "a is in between 101 to 1000 range"
End If
Next
End If
11.1 read Data and find that data size, If size <>4 then display invalid data
message, if data size = 4 then verify “a” is there or not in that data?
Dim x
x=Inputbox ("Enter 4 digit value")
x1=Right(x,1)
x2=Left (x,1)
x3=mid (x,2,Len(1))
x4=mid (x,3,Len(1))
y=len(x)
If y=4 Then
If x1="a" or x2="a" or x3="a" or x4="a" Then
msgbox "a is there"
else
msgbox "a is Not there"
End If
else
msgbox "Invalid Data"
End If
VB Script Procedures
In VBScript, there are two kinds of procedures available; the Sub procedure and the
Function procedure.
A Sub procedure is a series of VBScript statements (enclosed by Sub and End Sub
statements) that perform actions but don't return a value.
A Sub procedure can take arguments (constants, variables, or expressions that are
passed by a calling procedure).
If a Sub procedure has no arguments, its Sub statement must include an empty set
of parentheses ().
Syntax:
Sub Procedure name ()
Statements
-----------
-----------
End Sub
Or
Sub Procedure name (argument1, argument2)
Statements
-----------
-----------
End Sub
Example: 1
Sub ConvertTemp()
temp = InputBox("Please enter the temperature in degrees F.", 1)
MsgBox "The temperature is " & Celsius(temp) & " degrees C."
End Sub
Example: 2
A Function procedure is similar to a Sub procedure, but can also return a value.
Example: 1
Function Celsius(fDegrees)
Celsius = (fDegrees - 32) * 5 / 9
End Function
Example: 2
Function cal(a,b,c)
cal = (a+b+c)
End Function
A Function in our code must always be used on the right side of a variable
assignment or in an expression.
For example:
Temp = Celsius(fDegrees)
-Or-
MsgBox "The Celsius temperature is " & Celsius(fDegrees) & " degrees."
To call a Sub procedure from another procedure, type the name of the procedure
along with values for any required arguments, each separated by a comma.
The Call statement is not required, but if you do use it, you must enclose any
arguments in parentheses.
The following example shows two calls to the MyProc procedure. One uses the Call
statement in the code; the other doesn't. Both do exactly the same thing.
Notice that the parentheses are omitted in the call when the Call statement isn't
used.
Types of Functions
o Conversions (25)
o Dates/Times (19)
o Formatting Strings (4)
o Input/Output (3)
o Math (9)
o Miscellaneous (3)
o Rounding (5)
o Strings (30)
o Variants (8)
Important Functions
1) Abs Function
Returns the absolute value of a number.
Dim num
num=abs(-50.33)
msgbox num
2) Array Function
Returns a variant containing an Array
Dim A
A=Array("hyderabad","chennai","mumbai")
msgbox A(0)
ReDim A(5)
A(4)="nellore"
msgbox A(4)
3) Asc Function
Returns the ANSI character code corresponding to the first letter in a string.
Dim num
num=Asc("A")
msgbox num
4) Chr Function
Returns the character associated with the specified ANSI character code.
Dim char
Char=Chr(65)
msgbox char
* It returns A *
5) CInt Function
Returns an expression that has been converted to a Variant of subtype Integer.
Dim num
num=123.45
myInt=CInt(num)
msgbox MyInt
6) Date Function
Dim mydate
mydate=Date
msgbox mydate
7) Day Function
8) DateDiff Function
Returns the number of intervals between two dates.
Dim myday
mydate=#02-17-2009#
x=Datediff("d",mydate,Now)
msgbox x
9) Hour Function
Returns a whole number between 0 and 23, inclusive, representing the hour of the
day.
Dim mytime, Myhour
mytime=Now
myhour=hour (mytime)
msgbox myhour
mystring=Join(MyArray)
msgbox mystring
Dim MyCheck
MyCheck = VarType(300) ' Returns 2.
Msgbox Mycheck
* It Returns ‘Script’ *
Function myTime(N)
Dim StartTime, EndTime
StartTime = Timer
For I = 1 To N
Next
EndTime = Timer
myTime= EndTime - StartTime
msgbox myTime
End Function
Call myTime(2000)
MyVar = "459.95"
MyCheck = IsNumeric(MyVar)
msgbox MyCheck
Dim Input
Input = InputBox("Enter your name")
MsgBox ("You entered: " & Input)
21.1 Case-sensitivity:
By default, VBScript is not case sensitive and does not differentiate between upper
case and lower-case spelling of words, for example, in variables, object and method
names, or constants.
When we enter a value as a text string, we must add quotation marks before and
after the string. For example, in the above segment of script, the names of the Web
site, Web page, and edit box are all text strings surrounded by quotation marks.
Note that the value 31 is also surrounded by quotation marks, because it is a text
string that represents a number and not a numeric value.
In the following example, only the property name (first argument) is a text string
and is in quotation marks. The second argument (the value of the property) is a
variable and therefore does not have quotation marks. The third argument
(specifying the timeout) is a numeric value, which also does not need quotation
marks.
21.3 Variables:
We can specify variables to store strings, integers, arrays and objects. Using
variables helps to make our script more readable and flexible
21.4 Parentheses:
To achieve the desired result and to avoid errors, it is important that we use
parentheses () correctly in our statements.
21.5 Indentation:
We can indent or outdent our script to reflect the logical structure and nesting of the
statements.
21.6 Comments:
We can add comments to our statements using an apostrophe ('), either at the
beginning of a separate line, or at the end of a statement. It is recommended that
we add comments wherever possible, to make our scripts easier to understand and
maintain.
21.7 Spaces:
We can add extra blank spaces to our script to improve clarity. These spaces are
ignored by VBScript.
Errors
We have two types Errors in VB Script; they are VBScript Run-time Errors and
VBScript Syntax Errors
VBScript run-time errors are errors that result when our VBScript script attempts to
perform an action that the system cannot execute. VBScript run-time errors occur
while our script is being executed; when variable expressions are being evaluated,
and memory is being dynamic allocated.
VBScript syntax errors are errors that result when the structure of one of our
VBScript statements violates one or more of the grammatical rules of the VBScript
scripting language. VBScript syntax errors occur during the program compilation
stage, before the program has begun to be executed.
a) Creating a Folder
Option Explicit
Dim objFSO, objFolder, strDirectory
strDirectory = "D:\logs"
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFolder = objFSO.CreateFolder(strDirectory)
b) Deleting a Folder
c) Copying Folders
Set oFSO=createobject("Scripting.Filesystemobject")
oFSO.CopyFolder "E:\gcr6", "C:\jvr", True
d) Checking weather the folder available or not, if not creating the folder
Option Explicit
Dim objFSO, objFolder, strDirectory
strDirectory = "D:\logs"
Set objFSO = CreateObject("Scripting.FileSystemObject")
If objFSO.FolderExists(strDirectory) Then
Set objFolder = objFSO.GetFolder(strDirectory)
msgbox strDirectory & " already created "
else
Set objFolder = objFSO.CreateFolder(strDirectory)
end if
b) Checking weather the File is available or not, if not creating the File
strDirectory="E:\"
strFile="Scripting.txt"
Set objFSO = CreateObject("Scripting.FileSystemObject")
If objFSO.FileExists(strDirectory & strFile) Then
Set objFolder = objFSO.GetFolder(strDirectory)
Else
Set objFile = objFSO.CreateTextFile("E:\ScriptLog.txt")
End if
e) Reading data from a flat file and using in data driven testing
Dim fso,myfile
Set fso=createobject("scripting.filesystemobject")
Set myfile= fso.opentextfile ("F:\gcr.txt",1)
myfile.skipline
While myfile.atendofline <> True
x=myfile.readline
s=split (x, ",")
SystemUtil.Run "C:\Program Files\Mercury Interactive\QuickTest
Professional\samples\flight\app\flight4a.exe","","C:\Program Files\Mercury
Interactive\QuickTest Professional\samples\flight\app\","open"
Dialog("Login").Activate
Dialog("Login").WinEdit("Agent Name:").Set s(0)
Dialog("Login").WinEdit("Password:").SetSecure s(1)
Dialog("Login").WinButton("OK").Click
Window("Flight Reservation").Close
Wend
Set objFSO=createobject("Scripting.filesystemobject")
Set txtFilepath = objFSO.GetFile("E:\gcr.txt")
txtFilepath.Delete()
strDirectory="E:\"
strFile="gcr.txt"
Set objFSO = CreateObject("Scripting.FileSystemObject")
If objFSO.FileExists(strDirectory & strFile) Then
Set objFile = objFSO.Getfile(strDirectory & strFile)
objFile.delete ()
End if
Dim f1, f2
f1="e:\gcr1.txt"
f2="e:\gcr2.txt"
Public Function CompareFiles (FilePath1, FilePath2)
Dim FS, File1, File2
Set FS = CreateObject("Scripting.FileSystemObject")
CompareFiles = False
Do While File1.AtEndOfStream = False
Str1 = File1.Read
Str2 = File2.Read
File1.Close()
File2.Close()
End Function
Call Comparefiles(f1,f2)
sFileName="E:\gcr.txt"
sString="gcreddy"
Const FOR_READING = 1
Dim oFso, oTxtFile, sReadTxt, oRegEx, oMatches
Set oFso = CreateObject("Scripting.FileSystemObject")
Set oTxtFile = oFso.OpenTextFile(sFileName, FOR_READING)
sReadTxt = oTxtFile.ReadAll
Set oRegEx = New RegExp
oRegEx.Pattern = sString
oRegEx.IgnoreCase = bIgnoreCase
oRegEx.Global = True
Set oMatches = oRegEx.Execute(sReadTxt)
MatchesFound = oMatches.Count
Set oTxtFile = Nothing : Set oFso = Nothing : Set oRegEx = Nothing
msgbox MatchesFound
Dim objWD
Set objWD = CreateObject("Word.Application")
objWD.Documents.Add
objWD.Selection.TypeText "This is some text." & Chr(13) & "This is some more
text"
objWD.ActiveDocument.SaveAs "e:\gcreddy.doc"
objWD.Quit
Dim objexcel
Set objExcel = createobject("Excel.application")
objexcel.Visible = True
objexcel.Workbooks.add
objexcel.Cells(1, 1).Value = "Testing"
objexcel.ActiveWorkbook.SaveAs("f:\gcreddy1.xls")
objexcel.Quit
Test Requirements
1) Verify Login Boundary (Check all the boundary conditions of the Login
window. Checks to see if the correct message appears in the error window
(Flight Reservation Message)
2) Verify Cancel Operation (in Login Dialog box, if user selects cancel button,
before enter any data after enter data dialog box should be disappeared.)
4) Verify state of Update Order Button, before open an Order and after
open an Order (in Flight Reservation before opening an order Update Order
button should be disabled after opening an order enabled.)
7) Verify Flight From & Flight To Combo Boxes (In Flight reservation, select
an item from Fly From: combo box and verify weather that item available or
not in Fly To: combo box, like this select all items one by one in Fly From and
verify weather selected items available or not in Fly To.)
8) Verify Order No Entry in Flight Reservation. (In Open Order dialog box,
Order No object accepts numeric values only.)
9) Get Test Data from a Flat file and use in Data Driven Testing (through
Scripting)
10) Get Test Data From a Database and use in Data Driven Testing
(through Scripting)
11) Count, how many links available in Mercury Tours Home Page?
12) Count how many Buttons and Edit boxes available in Flight
Reservation window?
14) In Login Dialog box, Verify Help message (The message is ‘The password is
'MERCURY')
16) Create an Excel file, enter some data and save the file through VB
scripting?
ww.gcreddy.com