Professional Documents
Culture Documents
Signal Booster Questionnaire - MOT
Signal Booster Questionnaire - MOT
Phone #:_______________________
Email:_______________________________________
DOWNLINK FREQS
(BASE STATION TO PORTABLES)
INTERFERENCE FREQS
UPLINK FREQS
For RF congested locations where interference is expected, it is recommended to have a detailed site survey including
spectral analysis of the RF environment. If such surveys and tests are not performed, the booster design will be based solely
on the information provided by the customer in this document.
What is the distance from the base/repeater station to the booster site? ________ miles
What is the base/repeater station output power? ____________________
Are the combiner/filter and the feed-line losses known? ________
Base / repeater station antenna gain: ________dB;
watts
dB
Is the signal path from the base station antenna to the site antenna restricted or clear?
(Note that if the path is restricted, a received signal strength measurement at the proposed booster site antenna
location is desirable in order to determine path losses)
What type of internal RF distribution system were you planning on using: radiating cable, distributed antennas, or
a combination of both?
What type of cable were you planning to use, and are there any restrictions on the type of cable used, such as
plenum rated etc?
IF ASSISTANCE IN DESIGNING THE INTERNAL RF DISTRIBUTION SYSTEM IS BEING REQUESTED, PLEASE FURNISH AS
MUCH OF THE FOLLOWING INFORMATION AS POSSIBLE:
Date: