Professional Documents
Culture Documents
03 GILLAM-FEi Synchronisation Eng - 2
03 GILLAM-FEi Synchronisation Eng - 2
03 GILLAM-FEi Synchronisation Eng - 2
GILLAMFEi
FrequencyandTimeSolutions
CorporationOverview
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
FEI
FEIASIA
ASIA
Tianjin,
Free
Trade
Tianjin, Free TradeZone,
Zone,China
China
Production Center
GILLAM
GILLAMFEI
FEI
Belgium
Belgium- -Lige
Lige
&& SATEL-FEI
SATEL-FEI France
France
Strategic
StrategicPartners
Partners::
Morion
MorionInc.
Inc.
St.
Petersburg,
St. Petersburg,Russia
Russia
Oscillator expertise
ELCOM
ELCOMTechnologies
Technologies
Rockleigh,
Rockleigh,New
NewJersey
Jersey
RF expertise
FEI
FEI- -ZYFER
ZYFERInc.
Inc.
Anaheim,
Anaheim,California
California
USA
USA
GPS (& SAASM function)
TELECOM
Rubidium (Rb)
and
Quartz (OCXO, DOCXO)
Clocks
Plug-in Clocks
for Base Stations
TDMA, CDMA,
UMTS, W-CDMA
Integrated GPS,
dual GPS/GLONASS,
dual GPS/GALILEO
receivers
Test Equipment
Portable E1 Synch
Quality Meters
Portable Rubidium
with GPS
Re-Timing Units
GPS receivers
Cost effective
solution
BTS, Node B,
WiMax and DVB-T
Telecommunication
Network
Accessories
Network cabling
(i.e. pre-connectorised
cables for
VDSL2 DSLAM)
Structured Cabling
Cat 5e, 6, 6a and 7
(UTP, FFTP, SSTP, etc)
Frequency
Reference Sources
Frequency
Distribution
DC/DC Converters
Fiber Optic Patch Cord
Patch Panels
Synchronization
Network
Management
EMS
Rubidium and
Quartz Clocks
Low G-Sensitivity
Clocks
SAASM
GPS
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
FEI Corporation
~$60 Million Corporation
Addressing Billion $ Major Markets
Telecommunication Infrastructure
Satellite Payloads
Government/DOD Programs
NASDAQ Ticker: FEIM
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
GILLAMFEi
FrequencyandTimeSynchronisation
Overview
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
TimingandFrequencyAccuracy
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
TDM Synchronization
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
IP Ethernet Synchronization
Unlike TDM networks, Ethernet does not carry synchronization information.
Several means are defined to address this issue:
IEEE1588 PTP
Timing and Frequency
GPS Receiver
Timing and Frequency
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
IP Ethernet Synchronization
Unlike TDM networks, Ethernet does not carry synchronization information.
Several means are defined to address this issue:
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
IEEE1588 PTP
Timing and Frequency
PTP system is a distributed, networked system consisting of a
combination of PTP and non-PTP devices.
PTP devices include GrandMaster clocks, ordinary (slave) clocks,
boundary clocks, end-to-end (residence time) or peer to peer
transparent clocks, etc.
Non-PTP devices include bridges, routers, and other infrastructure
devices.
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
IEEE1588 PTP
Timing and Frequency
PTP Multicast or Unicast communication model.
IEEE1588 Telecom profile: use only unicast mode.
Slave-only clocks are allowed to make a request for unicast service from the master, by sending a PTP signaling message to the IP
address of the selected PTP GrandMaster clock.
In Telecom mode unicast, GrandMaster redundancy is implemented by 1+1 redundant clock with same IP address.
One step or two steps (with follow-up) clock mode (linked to the precise timestamp)
PTP time is accuracy is degraded by asymmetry in the paths taken by event messages. Asymmetry is not detectable by
PTP
PDV packet delay variation and traffic load influence the PTP time accuracy.
PTP event message must be sent in high priority.
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
GILLAMFEi
FrequencyandTimeSolutions
Solutions
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
US5Ge
Synchronization Supply Unit
PRODUCT OVERVIEW
US5Ge is GILLAMs latest state-of-the-art smart Synchronization Supply Unit (SSU) designed to satisfy
Telecom operators in their multiple Synchronization needs (both wireline & wireless and suitable for all
network levels).
(SSU)
The US5Ge modular and flexible platform has been designed to help Operators to build a reliable
network at the lowest cost of ownership, and to allow
Dual Modular Architecture
easy implementation of future features, thus
Dual Power Inputs and Power Supply Modules
protecting your investments.
Multiple Reference/Monitor InputsUp to 10
Each Input is bridged to Both Clock Modules
Dual GPS Antenna Inputs and receivers
Optional Dual On-Board GPS/GLONASS Reference Receivers
Optional Dual On-Board GPS/GALILEO Reference Receivers
Redundant Clocks (ST-2 or ST-3E)
Paired Output Modules for 1 to1 Protection
Redundant alarmed umbilicals to each expansion shelf - no daisy
chaining of expansion shelves
Multiple Alarm Surveillance Methodologies
Optional NTP Server/Client module
Optional NTP / SNTP Server Software (Com module)
- SNTP version 4 server Stratum 1 compliant to RFC 2030.
- NTP version 3 server Stratum 1 compliant to RFC 1305.
INPUTS
BridgedInput 1 on IOP-1 with input 1 on IOP-2, etc
Inputs are Software assignable 2.048MHz, E1, CC, DS-1, 1, 5, or 10 MHz
10 Inputs each IOP module
Compliant with SSM standards as specified by ITU-T G.704, T1.X1 and
Telecordia General Requirements
PERFORMANCE MONITORING
Simultaneous Data Collection on all Inputs
Data Metrics - Frequency Offset, TIE, MRTIE, TDEV, LMRTIE
Averaging periods - from 3 to 100,000 seconds
Threshold crossing Actions - Switch, Alarm, Report, Ignore
User Selectable Priority Options - Priority 1 to 11 or Monitor only
OUTPUT CAPACITY
20 (or 40) Outputs per Module, Paired for 1+1 Protection
20 Outputs per Module with 20 Frequency Feedback
Outputs are Software assignable 2.048MHz, E1
Main shelf capacity- 8 cards - 80 (or 160) Protected
Outputs
Expansion Capacity - 4 Expansion Shelves, 16 cards
Total System Capacity -720 (or 1440) Protected Outputs
GILLAM-FEi
Frequency, Electronics & Telecommunications
US5Ge Input Modules
GILLAM-FEi
Frequency, Electronics & Telecommunications
US5Ge Rate Select Output Card
PRODUCT OVERVIEW
The US5Ge Rate Select card is an output card for the US5Ge synchronization supply unit.:
It generates 20 signals from 1 kHz to 54 MHz in RS422 formats;
The frequency of each output is independently programmable in 10 Hz increments. The US5Ge Rate Select are protected output cards
and can be installed by pair in any US5Ge protected shelf slots;
Easy connection of the outputs is provided by the Rate Select Module connection panel either directly to the balanced signals or after
balanced to unbalanced conversion to a BNC connector.
Signal Generation
First a DDS (Direct Digital Synthesizer) with the US5Ge reference clock as base for sampling generates a frequency between 50 and
100 MHz. This frequency is chosen to be 1) an even multiple of the programmed output frequency, 2) the highest frequency possible. The
DDS generated frequency is then divided by an even number to obtain the desired output frequency.
This special way of generating an output frequency has many advantages:
The use of the US5Ge reference clock assures to the output signal the same frequency stability as the US5Gee reference clock;
Dividing the DDS generated frequency by an even number gives near perfect duty cycle (near 50%) on the output;
Dividing the DDS high frequency output to generate the signal gives excellent jitter and phase noise performance. Actually, the more the
signal is divided, the more phase noise is improved. Moreover, jitter performances are not degraded for low frequency output as usually
found on other wideband frequency generators.
Outputs redundancy
When two cards are present in a pair of protected slots, only one of them (the master card) drives the output signal. Each output signal is
phase synchronized on a 10 Hz reference signal sourced by the master card and available to its sister card. This way, when a switch of one
card to the other occurs, the phase of the output signal is preserved. If the master card is shut down or took off the shelf, the two cards
drive the outputs for a few cycles simultaneously so that the transition from one driver to the other runs smoothly and phase jump free.
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
US5Ge NTP Server / Client Output card
PRODUCT OVERVIEW
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
US5Ge PTP (IEEE1588-2008) Grandmaster clock products
PRODUCT OVERVIEW
Card Overview
The US5G PTP redundant card is designed to be a very stable Grandmaster clock. It can synchronize with the
IEEE-1588 (1588-2008 also known as PTPv2) protocol the real-time clocks in the nodes of a distributed system that communicates using a network.
The US5G PTP redundant card is fully integrated in the US5G(e) system.
One or several cards can be plugged
into the US5G main shelf. Each card occupies one POUT slot (Protected Outputs) of a shelf. Two cards can be
installed in a POUT slots pair to perform as a protected pair. In this case, if the active card fails, its sister card
takes the PTP interface control in a transparent way to the network. One or several pairs of cards can also be
plugged into a US5G expansion shelf.
is based on a powerful CPU with dedicated Gigabit Ethernet LAN controller and large FPGA device for
The card
on the fly PTP packets timestamping at Gigabit speed. PTP timestamps clock is derived from the high stability
US5G-US5Ge local clocks (Rubidium or OCXO quartz)..
The PTP interface utilizes Small Form-factor Pluggable (SFP) modules to support Gigabit optical interface on
the front face. PTP card(s) provisioning and monitoring are under control of the US5G-US5Ge COM management card and thus separated from the PTP dedicated Ethernet interface.
A set of front face LEDs allow to quickly monitor the activity
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
US5Ge PTP (IEEE1588-2008) Grandmaster clock products
PRODUCT OVERVIEW
Card Features
Support of IEEE 1588 protocol in version 2 (1588-2008 also known as PTPv2) on Ethernet (UDP/IP)
One Gigabit Ethernet optical interface : SFP module (MSA compliant) selected by user accessible from the front face of the card
Integrated hardware PTP messages detectors and timestamps unit (PTP hardware assistance)
Behaves as one IEEE 1588 Grandmaster clock on its Gibabit Ethernet optical network interface
One-step clock configuration
Unicast or multicast IEEE 1588 support
IPv4 support (IPv6 in a future release)
Unicast sessions negotiation
Two cards in a pair of protected slots act as redundant PTP ports with automatic switch over from one to the other in case
of failure
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
US5Ge PTP (IEEE1588-2008) Grandmaster clock products
PRODUCT OVERVIEW
Card Specifications
Protocols:
IEEE1588-2008
IPv4, IPv6 (future release)
PTP server performance:
Timestamps accuracy: 8 - 10ns typ.
15000 PTP transactions per second
125 up to 250 unicast slave sessions
Switch over in less than 10 seconds
Interfaces:
PTP interface : SFP Ethernet (front face)
TOD input : RJ45 (NTP clock driver type 4 with PPS signalling format)
TOD output for TOD daisy chaining : RJ45 (NTP clock driver type 4 with PPS signalling format)
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
UNISYNCe
Synchronization Supply Unit (SSU)
PRODUCT OVERVIEW
The Universal UniSynce PRC GPS is designed to function as a PRC and/or Mini
Synchronization Supply Unit (SSU/BITS) for common clock distribution to all
Network Elements (NEs) requiring external timing for synchronization.
It has been designed to comply with all Telcordia Generic Requirement (GR)
network synchronization equipment standards and to the ITU-T G.811 and
G.812 international telecom recommendations. It is based on a high
performance GPS or GPS/GLONASS or GPS/GALILEO timing receiver, it
can be equipped with additional reference input modules to accept two timing
reference signals of various formats and sources. It can accommodate up to 12
output timing sources (two in the basic configuration).
Performance Monitoring
Each input is continuously monitored for frequency accuracy
and stability. Performance Monitoring data is collected for:
Fractional Frequency OffsetFFOFF,
Each input is monitored for LOS, AIS, OOF, and BPV when
apply. SSM messages are also monitored when available.
The UniSynce provides one high performance local oscillators Quartz or Rubidium for holdover performance.
Up to twelve output ports are available, software assignable 2048 KHz, E1
Also 10 optional Frequency Feedback input ports
OptionalNTP/SNTPServer
UNISync has also 2 users selectable analog frequency outputs via BNC for 1, 5, 10 MHz and 1 PPS via BNC.
GILLAM-FEi
Frequency, Electronics & Telecommunications
MGPS
GPS receiver Clock
PRODUCT OVERVIEW
The MGPS is intended to provide time based network with a reliable, durable and
accurate
Timing Signal Generator (TSG).
The MGPS is a microprocessor controlled TSG with powerful software management features enabling configuration flexibility from a
simple array of standardized hardware modules. It is designed to distribute common clock references to all Network Elements (NEs)
requiring external timing for synchronization.
It has been designed to comply with all ETSI, Telcordia and ITU-T G.811 and G.812 international telecom recommendations.
The MGPS is supplied with one dedicated timing GPS receiver to provide Primary Reference Clock (PRC) capability.
From the output interfaces point of view, it provides 10 MHz, 1PPS, 2048 KHz-2048 Kbits/s output timing sources.
The equipment can also be used as NTP/SNTP server stratum level 1.
The MGPS supplies (basic configuration):
- Three (3) 2MHz - 2Mbit/s high quality outputs
- One (1) 1 PPS high stability outputs
- One (1) auxiliary 10 MHz port high quality outputs
The software allows a user to identify the output port assignment. Output ports may also be
inventoried in the system software.
Web User Interface
SNMP V1/V2c agent for monitoring by any ''SNMP Third Party Network Management System''
WebUser(HTTP)Interface
GILLAM-FEi
Frequency, Electronics & Telecommunications
PICOSYNC II
Cost effective GPS receiver
PRODUCT OVERVIEW
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
GIGASYNC
Gigabit Ethernet Synchronization
PRODUCT OVERVIEW
The GIGASYNC allows the insertion or extraction of a timing signal on a Gigabit Ethernet link while
maintaining transparency to data passing through the link.
Typical configuration using a device to insert a timing signal and a second one to recover it.
The GIGASYNC distributes clocks by means of the physical layer in the sense that the
frequency of the Ethernet bits is synchronized to the GIGASYNC reference. Idle
characters deletion/insertion are used in order to compensate for input frequency (not
synchronized) and output frequency (synchronized) differences.
GILLAM-FEi
Frequency, Electronics & Telecommunications
IEEE 1588 PTP
IP Backhaul Standalone Grand Master Clock
GNSS-based IEEE1588-2008 (PTP)
Stratum 1 PRC/PRS when locked to GPS
Stratum 2 holdover with Rubidium or when locked to remote input
Stratum 3E holdover with OCXO
Highly integrated multi-functional time server
Traditional timing outputs T1/E1, PPS, 10MHz, IRIG-B, ToD
Additional customer-specified outputs also available
IEEE1588-2008 slave
Highly integrated multi-functional timing client:
Traditional timing outputs T1/E1, PPS, 10/5/1MHz, NTP, etc
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
SQMP
Synchronization Quality Meter Platform
PRODUCT OVERVIEW
The only fully integrated and rubidium based Synchronization measurement set-up available on the market
today.
The SQMP is a high precision portable field instrument embedded with a high quality Rubidium oscillator.
It is designed for easy installation, operation and maintenance of Synchronization Networks.
The SQMP is composed by three modules :
- PHM : Phase Hardware Measurement module includes a high quality internal Rubidium oscillator, a high performance numerical phase
comparator and the interfaces.
- SQM : Synchronization Quality Meter, stores, analyses and computes the measurements. The SQM software runs on external PC with
Microsoft Windows (from Win95 to WinXP) operating system, connected through the SQM Bus interface (Serial COM port RS232/V24V28).
- GPS (option) : The GPS receiver additional module enables the S.Q.M.P. equipment to behave a high performance frequency reference.
This reference offers performance that complies with ITU-T G.811 standard regarding long-term accuracy. Associated with the PHM (S001 module) it offers a high long-term accuracy (from the GPS source) and a short-term frequency quality (linked to the DPLL performance
of the PHM).
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
SQMP
GUI Multitasking and multiwindowing
SQM software (multiple parallel data analysis)
Strip-chart, Graphical file viewing, Zoom functions
Retracefunction
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
SQMP
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
SQMP
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
TimeQMP
Precisely measures the accuracy of a wide range of classic and network
timing inputs against an internal precision GPS-controlled oscillator
Features
Measures and displays the difference between input time signal and UTC
Capable of measuring a wide variety of classic and network time signal inputs
Laboratory standard 1pps & 10MHz inputs can be used as time reference
Timing resolution of better than 1 nanosecond
Absolute accuracy of up to 50 nanoseconds to UTC
Automatic identification and analysis of Modulated Carrier Time codes
Full color touch-screen with user-friendly Windows- based operating system
USB port on front panel for easy access downloads for subsequent analysis of
data
Input available for measurement of relay opening/closure
User-selectable threshold for alarm generation
TQMP is invaluable where time of day information is distributed from a central master clock to sub-master clocks or user systems
over large distances via serial data links or packet networks.
Substantial delays can occur due to high levels of network traffic or even due to the long distance between the master clock and the
user.
Some commercially available software algorithms can reduce these errors but, unless the errors are accurately and independently
measured at the point to fuse, the user cannot be certain of the accuracy of his time source in this type of application.
Additionally, the high accuracy of the TimeQMP means that it canal so precisely measure the time error of free-running clocks and
timing systems which are synchronized from untraceable sources, such as television and radiobroadcasts, electrical power lines and via
the internet.
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
Signal Inputs
Selectable via the front panel touch screen:
1Pulse per Second (1PPS)
1Pulse every 2 Seconds (PP2S)
1Pulse per Minute (1PPM)
1 Pulse per Hour (1PPH)
Modulated timecode on to a 1kHz carrier
Timecode DC level shift
ASCII Serial time message at RS232, RS422 or RS485 levels
NMEA message plus Pulse (1PPS & PP2S)
Network Time Protocol (NTP) to RFC1305
Precise Time Protocol (PTP) IEEE 1588v2
DCF77 timecode
Have Quick
Ease of Use
As the unit is portable and battery powered, it is simple to
synchronise the unit to GPS outside by using the integral GPS
antenna.
Alternatively, synchronisation can take place inside if connected
to an external GPS antenna, with further flexibility to use AC
mains power
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
*Pleasenote:
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEi
Frequency, Electronics & Telecommunications
GILLAMFEi
FrequencyandTimeSolutions
Reliability,SupportandWarranty
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
High RELIABILITY
US5Ge
Examples
- Telefonica
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEI Guarantees
Continued and Uninterrupted Deliveries
ThecontentofthisdocumentisthepropertyofGILLAMFEi.Itistobetreatedstrictlyconfidentialandisnottobe disclosed,36
reproduced,orusedexceptasauthorizedbyGILLAMFEi
GILLAM-FEI Guarantees
Continued and Uninterrupted Deliveries
GILLAM-FEI
Worldwide Support Capability