Professional Documents
Culture Documents
DDF E1
DDF E1
Network
Element A
LED
Tracer
Wire
DSX
MON
MON
Tx OUT
Rx IN
OUT
IN
X-OUT
OUT
IN
X-IN
PERMANENT
EQUIPMENT
CABLE
Network
Element B
DSX
X-OUT
SemiPermanent
Cross
Connect
Jumper
OUT
IN
OUT
O
I
IN
Tx OUT
Rx IN
X-IN
PERMANENT
EQUIPMENT
CABLE
Loaded ETSI
Skeleton Bay
The Products
The ETSI Skeleton Bay is the basis
of ADCs E1 DSX product offering.
The fully assembled bay meets
the standard ETSI 600mm wide x
2200mm tall footprint. The fuse
panel and all the necessary cable
management are factory installed
in the bay making installation and
ordering fast and easy. DSX panels
are added in the field as needed. The
ETSI skeleton bay is compatible with
all ADC 64 termination DSX panels
(FlexDSX, PxPlus and DSX 64).
A total of 768 twisted pair or coaxial
terminations fit in each bay.
FlexDSX
PxPlus
DSX 64
Empty ETSI
skeleton bay
Selecting a Panel:
FlexDSX, PxPlus and DSX 64 Solutions
FlexDSX:
FlexDSX offers four-port jack
access with dual monitor for
applications where the crossconnect may be located far
away or is inaccessible such as in
collocation applications. The dual
monitor port also allows for fast
isolation of problems as both sides
of the circuit can be accessed easily
from one termination. The jacks
are individually removable and
the backplane terminations are
removable in groups of four.
PxPlus:
Feature/Need
Tracer LED
Oversized labels
Removable jacks
DSX 64:
Ideal for applications where individual circuit modularity is not required. DSX 64 is a fixed 64 circuit panel with
three port jack access.
Removable backplane
FlexDSX
Four-Port (Dual Monitor) Jack Access
Individual
removable
jacks
FlexDSX
four-port jack card
PxPlus
Three-Port Individual Jack Modularity
The PxPlus panel was designed for E1 DSX
cross-connect applications where individual jack
modularity is required. The PxPlus system consists of
a 64 circuit empty panel and individual three port
jack access cards that are sold separately. The empty
panel can be loaded into the bay and precabled.
When service is ready to be turned up, the PxPlus
jack cards are installed into the panel providing for
true cost deferment.
Three-port
(single monitor)
jack access
- allows easy
circuit access for
testing, patching
and monitoring
DSX 64 Jackfield
Empty ETSI
skeleton bay