Professional Documents
Culture Documents
Tutorial - Routing Pipes and Tubes in Solidworks
Tutorial - Routing Pipes and Tubes in Solidworks
Tutorial - Routing Pipes and Tubes in Solidworks
Added images
5 answers
o
TUTORIAL: Routing - Pipes and Tubes in Solidworks
2. Step 1
I will make it in assembly
3. Step 2
The first thing you should do.
select Tools - Add Ins - and select solidworks Routing
4. Step 3
and select a design library - Routing - Piping - flange - choose one, here I use the slip on weld flange.
5. Step 4
and select the configuration you want. here I am using the first
6. Step 5
make your settings. then ok.
7. Step 6
and will appear as in the picture, you can slide the line according your dimensions ..
8. Step 7
after that the result will be like this, and forming pipe
9. Step 8
then I added a flange back
10. Step 9
then I added a back flange valves in part.
11. Step 10
the same as that to step 6, and then click on flange face - right click and select add route.
12. Step 11
and will display the image like this, then I will make the line manually, because it does not use the "auto route"
13. Step 12
The line that I created manually. and it can do to suit your needs ..
14. Step 13
and after the exit, the result is like this.
I hope this tutorial is useful for you to learn ..
thank you.