Professional Documents
Culture Documents
Wu - Neta-022-Am Qig
Wu - Neta-022-Am Qig
Please read the Manual and Safety Instructions before using the
product for the first time. Otherwise damage can be the result.
-1-
2.0 Introduction
The WU-NETA-022-AM Wireless N 150Mbps USB Adapter is
designed for SOHO users.
It allows users to enjoy Wireless network and easy
wireless security connection.
2.1 Specification
Complies with IEEE802.11b/g/n standards
High transfer data rate up to 150Mbps
LED:
-2-
3.0 Installation
The following instructions will
guide you to through the
process of installing the
Wireless USB Adapter.
1. Insert the Wireless N USB
Adapter into an empty USB
For Windows XP
For Windows 7
-3-
-4-
6. Click Finish
to complete
the Installation.
4.0 Operation
Windows WLAN Tool
1. If you have installed only the Drivers you can connect to a
WLAN with the Windows XP/Vista/7/8 own WLAN Tool.
-5-
-6-
WPS
WU-NETA-022-AM
supports WPS. Click on
Profile and then on WPS
Configuration.
Methods:
1. PBC (Push Button Configuration) Method
(recommended) The Device to which you are connecting
must have a WPS Button available on its external Casing
or as Part of its Software Interface.
2. PIN Method
Use this Method if the Device to which you are
connecting has no WPS Button.
Config Mode = Enrollee
If the Device to which you are connecting requires a PIN.
Config Mode = Registrar
If the Device to which you are connecting provides a PIN.
AP Mode
The device also can serve as an access point to transmit
wireless signals and create wireless network, allowing other
wireless clients to access the network.
To switch to AP mode, right-click the Ralink utility icon and
click Switch to AP Mode.
-8-