Professional Documents
Culture Documents
Recieiver Block Diagram
Recieiver Block Diagram
I am not going to explain very complex solution for this,neither I claim to be an expert
traffic controller . If we could fix up some sort of transmitter system on the highways
which can detect the speed of the vehicle and convey to the driver that he is not in the
permitted speed limit in the particular area or he is in a no horn area, or even further , if
the automatic breaking system could be actuated on over speed.
particular pin of the microcontroller will become low and microcontroller will will
detect key press. If no key is pressed all these pins will stay high.
Corresponding messages are stored into microcontroller rom area . Microcontroller will
read the corresponding message fron the ron area and shift out serially from the pin
number 3 of the microcontroller.
data shifted out serially at the rate of 300bits per second. Output data fron the pin 3 of
the icrocontroller is connected to the data in pin 2 of the 433mhx transmitter . the
transmitter will transmit this data to air. Entire circuit is driven by 9v battery ic 1 is 5 v
regulator which gives regulated 5v dc required for microcontroller and 433mhx
trensmitter module. Ld1 gives the visual indication whenever any key is pressed.
.