Professional Documents
Culture Documents
ArQoS PROBE-PON - EN v10.1 PDF
ArQoS PROBE-PON - EN v10.1 PDF
PT Inovao
2012
This document is intellectual property of PT Inovao, SA and its use or spread is prohibited without express written permission.
through Innovation
Agenda
AGENDA
10/25/2013
through Innovation
Agenda
AGENDA
through Innovation
25-10-2013
10/25/2013
through Innovation
ArQoS PROBE-PON
PROBE-PON
Non-intrusive wavelength for monitoring 1650 nm
The test wavelength can be inserted into the network using a
WDM filter: MUX WDM-PON OLT PROBE
Compatible with various PON technologies, including GPON,
GEPON, BPON networks and future generation as XGPON1
Compatible with point-to-point technologies
To detect the exact position of the customers in point-tomultipoint networks is requires reflective elements on the
emission wavelength of the OTDR
Reduced event dead zone
High resolution
High dynamic range
Detection with less than 50 cm of Clients in
a PON with optical reflection filter
through Innovation
Generic Architecture
25-10-2013
10/25/2013
through Innovation
ArQoS PROBE-PON
System is
presented with
several alternative
solutions as
needed by the
number of optical
ports
Up to128 optical
output ports
PROBE-PON
PROBE-PON
Extended
Expansion up to
512 optical output
ports with OSw
PROBE 1x128
through Innovation
ArQoS PROBE-PON
The PROBE-PON exists with several different
options:
8 ports;
16 ports;
32 ports;
64 ports;
128 ports;
The equipment is capable to communicate with the
management server by two different types: Ethernet
and GSM. If first one has a failure with the
management communication, the equipment
detects it automatically and switch to the available
communication.
The equipment can control an remote optical switch
by optical connection, Ethernet or even GSM.
10/25/2013
through Innovation
ArQoS PROBE-PON
Point-to-Multipoint
Failure Location
ONT
Splitter
WDM-Filter
OLT
ONT
Integrated
Reflective Filter
Traffic signal
PROBE-PON
The testing signal could be injected to the network through the MUX WDM OLT
PROBE-PON 4 ports GPON, or using a input port of a splitter in the Central Office.
through Innovation
Central office
1310nm
1490nm
1Xn
1Xn
The peak of
ONT1 is
missing
SWITCH
1650nm
ArQoS
Special reflector
10/25/2013
through Innovation
ArQoS PROBE-PON
Point-to-Point
Traffic signal
PROBE-PON
CO
CO
WDM-Filter
Failure Location
through Innovation
25-10-2013
10/25/2013
through Innovation
ArQoS PROBE-PON
Detection of network elements
25-10-2013
through Innovation
ArQoS PROBE-PON
Comparison between network curves and alarms
Red curve
reference trace
Green curve
monitoring curve
Yellow, different
optical properties
Alarm, new event
25-10-2013
Red, event
disappear
10/25/2013
through Innovation
ArQoS PROBE-PON
Comparison between network curves and alarmsPartly Sampling
Zooming the initial part of the probed network
Initial test measurement in yellow
through Innovation
Agenda
AGENDA
10/25/2013
through Innovation
ArQoS PROBE-PON
Main Functionalities:
Non intrusive tests for point-to-point and point-multipoint fiber optic
networks
Monitor up to 512 fiber optic networks per PROBE-PON
Precise discover of defects and irregularities
Automated tracking and identification of subscribers
Fault detection with high accuracy in all derivatives of the network
Web based and multi-user management system
Interactive and scheduled tests
Threshold alarm events for real time monitoring
Statistical reports for historical analysis
Integrated GIS viewer
through Innovation
ArQoS PROBE-PON
Customer Benefits:
Remote and automated testing
Reduction of OPEX costs through remote sensing of fiber
cuts in point-to-point and point-multipoint, preventing
undue movement of technicians to the field
Real-time screening of anomalies for anomaly diagnostics
Statistical analysis for point-to-point and point-multipoint
networks to support preventive maintenance
Immediate detection of common faults that affect multiple
GPON services and clients
Integration with other OSSs systems to facilitate design,
installation, provisioning, maintenance and diagnosis
operational processes
10/25/2013
through Innovation
ArQoS PROBE-PON
ArQoS Management System is web-based system , multi-platform and multi-user with
access control and user managed network partitioning.
This system follows the latest guidelines of the OSS (Operating Support Systems) in
TMForum Frameworkx. Using the latest components (state of the art) JEE (Java Enterprise
Edition) application servers supported in a robust and scalable and modular system.
System access is done using a simple web browser connected to the network management
and is controlled by Access Control System (ACS). All access to the system require user
authentication.
through Innovation
ArQoS PROBE-PON
ArQoS Management System is divided into modules with different responsibilities, functions
and capabilities. This allows the use of specific modules for specific types of users at different
levels and use the distribution system.
Access to the system and its modules is controlled by the Access Control System (ACS). This
module allows the user management and access to each feature.
10
10/25/2013
through Innovation
ArQoS PROBE-PON
Site Manager is used to create the organizational domains of the network where will be
located the PROBE-PON. This module offers the possibility of partitioning the network into
logical and physical views. These procedures are usually performed at the time of system
installation and every time new locations or organizational domains are used for installation of
PROBE-PON.
through Innovation
ArQoS PROBE-PON
To discover and configure the PROBE-PON is used another module: Resource Manager.
Supports automatic discovery of PROBE-PON for the simple indication of the IP access.
This module is mostly used when a new PROBE-PON is discovered or is necessary to
make some configuration or status query on the equipment.
This module is responsible for managing subscriptions of the network with representation
and manual validation of events (joints, connectors and termination of client). These
network signatures are used as reference measures for further analysis in diagnostic
testing and monitoring for fault detection.
11
10/25/2013
through Innovation
ArQoS PROBE-PON
To carry out tests on fiber optic networks is used ArQoS with Fiber Optics . In this
module are carried out all activities related programming and interactive tests
scheduled, troubleshooting and analysis of results. This is the core module
management system and more used for daily operation.
through Innovation
ArQoS PROBE-PON
Test Scheduling and Result Analysis
12
10/25/2013
through Innovation
ArQoS PROBE-PON
ArQoS Reports
General Reports
ArQoS Reports
Dedicated PROBE-PON reports
through Innovation
The End
Thank you
25-10-2013
13