Professional Documents
Culture Documents
Drilling Tools Codes Rev1
Drilling Tools Codes Rev1
Drilling Tools Codes Rev1
To install the tool into the drilling unit we will use some connections and tapers:
ISO 45 [40] connection with :
..Morse Taper
..Weldon Taper
..Morse Taper
..Weldon Taper
Programming code:
Comment:
DRILL
Sensitive twist drilling
Tool type:
standard HSS drill-bit
Working operation: standard hole
by Bruno Turati revised by Ing. Pascucci
Technical features:
3. Grinding frequently
4. Long life
5. Long chips
6. Int/Ext coolant
Programming code:
Comment:
DRILL_32
Special programmed drilling
Tool type:
Working operation:
inserts drill-bit
programmed hole
Technical features:
1. High cutting speed
2. Expensive
3. Not grinding inserts
4. Inserts short life
5. Short chips
6. Int. Coolant only
Programming code:
Comment:
DRILL_33
Twist programmed drilling
Tool type:
Working operation:
Technical features:
See DRILL_32 code tools
Programming code:
Comment:
DEBURR
Normal deburring
Tool type:
Working operation:
deburring tool
removing burrs from the hole output
Programming code:
Comment:
FLARE
Countersink
Tool type:
Working operation:
countersink at 90
countersinking
COUNTERSINK at 90
Technical features:
Programming code:
Comment:
Tool type:
Working operation:
DEBURR_36
Deburring with NBT
Programming code:
Comment:
Tool type:
Working operation:
POINT_37
Twist pointing
Technical features:
Programming code:
Comment:
SPOT - FACING
Spot - Facing
Tool type:
Working operation:
counterbore
enlarging a preformed hole
Programming code:
Comment:
POINT
Pointing with point
Tool type:
Working operation:
Technical features:
1. Depth on time
2. Low feedrate
3. Known tool length
4. No coolant
Programming code:
Comment:
TAP _ xx
Tapping type
Tool type:
Working operation:
screw tap
tapping different threads
Measuring unit : mm
TAP
M10
M10x1*
[*Size of pitch in mm]
WHITWORTH TAPPING
TAP 44
: Fine pitch
11/4x11* W
[*Threads per inch]
-16* UNF
-10* UNC
[*Threads per inch]
G 1 *
[*Size of pipe]
TAP
Technical features:
1. Preformed hole
2. Feedrate = Screwpitch
3. Special taper (return)
Programming code:
Comment:
MILL
Milling
Tool type:
Working operation:
end mill
milling on single pass
Technical features:
1. Hole already made
2. Contouring speed
3. Good connection and taper
4. Fast downstroke
5. Milling parameters
Programming code:
Comment:
POCKET
Pocketing
Tool type:
Working operation:
Technical features:
1. Slow downstroke
2. Contouring speed
3. Locked material
4. Pocketing
parameters
Programming code:
Comment:
POCKET_63
Chamfering
Tool type:
Working operation:
Tecnical features :
Programming code:
Comment:
POCKET_64
Back Chamfering
Tool type:
Working operation:
Tecnical features :
Programming code:
Comment:
POCKET_65
Round insert face milling
Tool type:
face and rounds inserts mill
Working operation: top multi steps bevelling or pocketing
Tecnical features : milling parameters
by Bruno Turati revised by Ing. Pascucci
Programming code:
Comment:
POCKET_66
Round insert back face milling
Tool type:
face and rounds inserts mill
Working operation: bottom multi steps bevelling or pocketing
Tecnical features : milling parameters
by Bruno Turati revised by Ing. Pascucci
Programming code:
Comment:
POCKET_67
Pocketing helical interpolation
Tool type:
Working operation:
Tecnical features :
Programming code:
Comment:
POCKET_68
Scribing
Tool type:
Working operation:
Tecnical features :