Professional Documents
Culture Documents
Technical: BTR-1.0 Tubing Retrievable Mandrel
Technical: BTR-1.0 Tubing Retrievable Mandrel
Table of Contents
Description..................................... 1 Application/Operation .................... 3
Features/Benefits .......................... 2 BTR-1.0 Tubing Retrievable Mandrel
Description
The BTR-1.0 tubing retrievable gas lift mandrels are made up as an integral part of the production tubing when preparing a well for gas lift, chemical injection, or other special applications. This mandrel utilizes 1.0 inch flow control devices. If the mandrel is used in gas lift operations, it is designed to be used
with injection pressure operated gas lift valves.
These mandrels are designed with a long tapered upper lug and lower pressure lug to facilitate mandrel passage during installation and removal from the well. Side guards plates are welded to the up per
lug and mandrel body. This design provides protection and containment for flow control equipment and
prevents damage to the equipment during installation or removal from the well.
The BTR-1.0 tubing retrievable gas lift mandrels are available in J55, N80 and L80 grade material.
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document is the property
of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent with the
purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in conjunction with equipment or product.
11/7/06 Baker Hughes Incorporated.
WARNING
Use of Baker equipment contrary to
manufacturers specification may result in
property damage, serious injury or fatality.
Features/Benefits
Large
ported
pressure
lug
reduces
impingement velocity of gas against opposite
mandrel wall
API and premium threads available in
Box x Pin configurations
Clearance above and below lugs allow for easy
make-up to tubing string
Available in a wide range of sizes and threads
Compatible with other manufacturers' flow
control devices
Rev. New
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is
revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker
Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent
with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned
or sold, either alone or in conjunction with equipment or product. 11/7/06 Baker Hughes Incorporated.
Application/Operation
ID(in.)
3.783
4.335
3.706
4.231
2.251
2.501
3.063
3.688
2.910
3.460
1.995
2.441
1/2 - NPT
1/2 - NPT
A - Lug to Collar
B - Lug to Collar - Special Clearance
C - Lug to Center Line of Tubing
D - Collar Diameter
E - Collar Diameter - Special Clearance
Page 3 of 3