Professional Documents
Culture Documents
Casing Hanger Calculation
Casing Hanger Calculation
1
Page
Calculation No
Prepared By
YUDHI
of
002 rev-1
Date
21-Jul-13
This calculation was conducted in order to determine casing slip capacity. Initial load comes from downhole pressure (P)
uniformly distributed to casing and (PANNULUS) which act between outer side of casing and wellhead inner profile.
P will be transfer to casing slip through casing. It will create radial load (F) as it will be translated to casing slip
in terms of axial load for braking movement (HC).
In the picture below, PANNULUS being visualize act upward, while in practice its exerted to casing in all direction,
especially in a band of uniform pressure where casing slip directly bite the casing outer profile.
Nomenclature
1
2
F
HC
P
PANNULUS
PANNULUS
Known Casing Data
OD
ID
IDDRIFT
t
RMEAN
ppf
y
PCOLLAPSE
4.00
15
0.280
30,000,000
0.3
5,000
[inch]
[]
[-]
[PSI]
[-]
[PSI]
slip length
taper slip angle
friction coefficient
modulus Young
Poisson Ratio
annulus pressure (between casing and slip)
9.625
8.681
8.525
0.472
4.577
47.0
80,000
[inch]
[inch]
[inch]
[inch]
[inch]
[lbf/ft]
[PSI]
4,750
[PSI]
Friction Angle
= atan()
=
15.64 []
Foundation Modulus
2
k = (E.t)/(RMEAN )
= 676,077 [PSI/inch]
Flexural Rigidity
D = (E.t3) / 12 (1-2)
=
288,885 [lbf.ft]
Cylinder Constant
= 4k/(4.D)
0.875 [inch-3/4.ft-1/4]
=
My Calculation
Page
2
Calculation No
YUDHI
of
002 rev-1
Date
21-Jul-13
for FY = 0
for FX = 0
R2 = F / (cos - .sin )
R2 = P.(2.l.t) / (cos - .sin )
F = R2.(cos - .sin )
HC = R2.sin + R1.cos
HC = R2.sin + (R2.).cos
HC = R2.(sin + .cos )
HC = [P.(2.l.t) / (cos - .sin )].(sin + .cos )
HC = P.(2.l.t).[(sin + .cos )/(cos - .sin )]
HC = P.(2.l.t) / cot (+)
0 [PSI]
2 = (MAX.E/RMEAN)+(MAX.1)
=
-40,052 [PSI]
TOTAL = y - 2
=
39,948 [PSI]
My Calculation
3
Page
Calculation No
Prepared By
Trigonometric proof for transverse load factor from pipe load to slip
cot
cot
cot
cot
(+) =
(+) =
(+) =
(+) =
[1]
[2]
[3]
[4]
[5]
YUDHI
of
002 rev-1
Date
21-Jul-13