Professional Documents
Culture Documents
Industrial Endoscopes General Overview en - Ver3
Industrial Endoscopes General Overview en - Ver3
Industrial Endoscopes General Overview en - Ver3
General Overview
Videoscopes
Fiberscopes
Rigid Borescopes
Defense/Security
Power Generation
Architecture/Construction
Automotive
Education/Research
System Charts
Inspection
Magnification Charts
Accessories
Light Sources
Industrial
Rigid Borescopes
Industrial
Fiberscopes
Industrial
Videoscopes
Insertion Section
Image Sensor
LCD
Monitor
Signal Bus
Distal End
Field of View
Flexible Portion
Depth
of Field
Bending Section
Objective Lens
Remote Control
LED Illumination
IPLEX YS / IPLEX TX
LCD Monitor
lnsertion Section
Image Sensor
Signal Bus
Distal End
Field of View
Flexible Portion
Light Guide
Light Source
Bending Section
Control Unit
Depth
of Field
Objective Lens
Remote Control
Industrial Fiberscopes
lnsertion Section
Structural
Drawing
Image Guide
Distal End
Field of View
Flexible Section
Light Guide
Eyepiece Lens
Depth
Bending Section
Light Guide Connector
of Field
Objective
Lens Light Source
Structural
Drawing
Relay Lenses
Field of View
Stainless Steel Tube
Eyepiece Lens
lnsertion Section
Depth
of Field
Light Source
Miniborescopes
lnsertion Section
Sel-foc Rod Lens
Light Guide
Eyepiece Lenses
Field of View
Stainless Steel Tube
Sel-foc Wide-aperture Lens
Light Sources
P.24-25
Accessories
LED Illumination
Light Source
Depth
of Field
P.2628
Inspection
IPLEX FX
IPLEX LX / IPLEX LT
P.10-11
Industrial Videoscope
IPLEX UltraLite
IPLEX TX
*1 Super stereo measurement modes are not available for IPLEX LX,
IPLEX UltraLite and IPLEX MX II.
Industrial Videoscope
P.12
Industrial Videoscope
P.13
IPLEX YS
P.14
Industrial Videoscope
IPLEX MX II
P.15
IPLEX series
Features and Specifications
P.16-18
Industrial
Fiberscopes
Industrial Videoscope
Industrial
Rigid Borescopes
P.8-9
Industrial
Videoscopes
Industrial Videoscope
B e n e fi t s
B e n e fi t s
IF6C5X1/IF8C5/IF11C5
P.19-20
Industrial Fiberscopes
IF6PD4/IF2D5/IF4D5/IF4S5
P.19-20
Industrial Fiberscopes
IF5D4X1-14
P.19-20
P.21-23
Swing-prism Borescopes
P.21-23
Zoom Swing-prism
Borescopes
P.21-23
Engine Borescopes
P.21-23
P.21-23
Miniborescopes
P.21-23
Light Sources
Industrial Fiberscopes
High-resolution image transmission in a laserwelded stainless steel insertion tube with light
guide fibres for bright illumination. Wide selection
available to suit any requirements.
Magnification Charts
P.29
System Charts
P.3031
System Charts
B e n e fi t s
Inspection
Magnification Charts
Accessories
Industrial Videoscopes
Main Features
Compact and Lightweight System
IPLEX is the all-in-one system that is easy to set up. Power is
provided by an internally mounted Lithium-ion battery.
The compact size IPLEX makes portable operation a reality.
Multi-language Display
All IPLEX videoscopes have a multi-language display allowing users
to choose from one of several different languages for the interface.
Main Applications
Ideal when image adjustment, recording and
measurement function are required as well as
observation with high-resolution and bright images.
Available for various inspection fields.
For Inspecting:
Inside engines of vehicles, aircraft, and gearboxes
Inside piping, such as heat exchangers, steel pipes, and
drainage pipes
Inside long pipes, such as plant piping, condensers, and welds
For wide cavities, such as interiors of tanks, pressure vessels,
and wind turbine blades
Inside precision machinery, such as automotive parts and copiers
*3: Video recording function is not available with the IPLEX MX II.
Optical adaptor
Steel coil
Mesh interior
Resin tube
Braided exterior
Stereo Measurement
Industrial Videoscopes
Extra-long 30 m scope is
equipped with innovative
novative
laser illumination and
scope articulation
n
technologies. It delivers
unprecedented image
mage
quality and manoeuvrability.
oeuvrability.
Inspection
Magnification Charts
WiDER
RoHS
The European RoHS Directive. No lead, mercury, cadmium,
hexavalent chromium, PBBs or PBDEs are used.
Note: The RoHS mark is originally designed by Olympus.
System Charts
MIL-STD
Accessories
Light Sources
Industrial
Rigid Borescopes
Industrial
Fiberscopes
Industrial
Videoscopes
Product Lineup
Industrial Videoscopes
6.5 in.
Temperature Resistance
The IPLEX FX scope units are resistant to insertion in higher
temperature environments now 100C meaning that inspections
can take place sooner as you wont need to wait as long for the area
to cool. Additionally, a temperature sensor provides a two-stage visual
warning in order to prevent overheating.
TM
Interchangeable Scopes
The IPLEX FX offers a range of
interchangeable scopes, allowing you
to choose the right one to fit the job.
This means a single IPLEX FX can
be configured for a variety of
inspections. Scopes are
available in diameters
of 4.0 mm, 6.0 mm and
6.2 mm, and in various
lengths ranging from 2
m to 18 m. A 7.5 m scope
with a smooth outer coating is
also offered. This scope is ideally
suited to nuclear and pharmaceutical plant inspections where ease of
cleaning and decontamination are priorities.
Ease of Use
Compact, Lightweight, Battery-powered
Power is provided to the IPLEX FX
by an internally mounted, Lithiumion battery which provides over two
hours run-time. The compact size
of the IPLEX FX makes portable
operation a reality either bodywear the lightweight system or
place it on a surface and allow the
non-slip, rubber corners to hold it
in place while you carry out your
inspections.
Industrial
Fiberscopes
Industrial
Rigid Borescopes
Our unique Spot-Ranging feature is the industrys only real-time tipto-target distance measurement tool. With the IPLEX FX, the user can
easily determine whether the scope tip is close enough to calculate
the most accurate measurement on the first try.
Light Sources
TM
Inspection
Magnification Charts
System Charts
Measurement Accuracy
Accessories
TM
Industrial
Videoscopes
Industrial Videoscopes
Industrial Videoscopes
Convenient Portability
Compact and Lightweight
The IPLEX LX and LT weigh just 2.7 kg, including the two-hour running
time Li-ion battery. They can be worn or carried with ease and set up
almost instantly.
189 mm
Despite being only 227 mm wide and 189 mm tall, the IPLEX LX and
LT integrate a surprisingly large 6.5 in. monitor for exceptional visibility,
whether at arms length
99 mm
or across a workbench.
227 mm
At less than 100 mm thick
including the pivoting
handle/stand, the IPLEX LX
and LT can be worn, stand
6.5 in.
upright, or be fastened to a
tripod or mounting arm for
operation in practically any
environments.
64 mm
Rugged Durability
All Weather Resistance
You can confidently bring the IPLEX
LX and LT to almost any difficult
environment. They can be used in
rain, sand, and dust, and withstand
physical shocks caused by drops and
falls, ensured by IP55 and MIL-STD
compliance. With its low-reflection
display, the daylight-view monitor
reproduces clear, vivid images even
under the brightest sunlight.
RAIN
SUNLIGHT
DUST
The main units removable USB flash drive and Li-ion battery are
contained inside a latched, sealed compartment for protection against
environmental hazards and rough treatment.
Accessories
Industrial
Fiberscopes
Industrial
Rigid Borescopes
Light Sources
Inspection
Magnification Charts
System Charts
Industrial
Videoscopes
Industrial Videoscopes
Industrial Videoscopes
Dramatically improve your field inspection efficiency with a palmsized, ultralight videoscope. With its durable body and superb
perb
image quality, the new IPLEX UltraLite delivers high quality
y and
reliable inspections in tough and confined spaces.
Mobility
Surprisingly compact and lightweight
The IPLEX UltraLite weighs only
700 g with its lithium-ion battery.
This easy-to-use videoscope
is so small and light that it is
the perfect companion for the
inspector who works in areas
with limited access or in cramped
spaces or has to navigate narrow
stair cases and steep ladders.
Quality
Palm-sized ergonomic design
Usability
Intuitive operations by icon based menus
and quick-access hot buttons
IPLEX UltraLite menus feature
simple, intuitive icons that
let you quickly identify and
activate the desired functions.
In addition, IPLEX UltraLite
eliminates complicated menu
settings. By pressing dedicated,
direct-access keys, you can
quickly articulate the scope
tip, record images, adjust
brightness, and input text.
Industrial
Rigid Borescopes
Industrial
Fiberscopes
Industrial
Videoscopes
Industrial Videoscopes
Light Sources
Inspection
Magnification Charts
System Charts
Accessories
Industrial Videoscopes
Outstanding Operability
The 6.5 in. daylight-view monitor delivers vivid images both indoor
and outdoors. Our unique image processing capability, WiDER
(Wide Dynamic Extended Range), brings out detail in shadowed and
highlighted areas to produce bright, contrast-balanced images across
the entire depth of field.
SCREEN DETAIL
Scope insertion length
Image at standard gain setting
Precise Diagnosis
On-screen gravity
orientation
You can record JPEG still images and AVI movies into a removable
Compact Flash card or USB flash drive, and use the ImageNotepad
to enter extended descriptions on recorded images. Your descriptions
are immediately accessible as part of each image when inspected
data is transferred to a computer.
Industrial
Videoscopes
Industrial Videoscopes
Industrial
Fiberscopes
Only contains articulation wires and electronics. With LED illumination at the scope
tip, fibre optic bundles are not necessary.
14.85 mm
4.4 mm
21.34 mm
6.0 mm
Image Quality
Large Monitor for Detecting Small Defects
99 mm
227 mm
189 mm
The IPLEX MX II is
equipped with a large 6.5
in. monitor that reveals
small defects clearly and
accurately. The monitor
features a low-reflection
display and produces
vivid images both indoors
and outdoors.
6.5 in.
64 mm
Accessories
Inspection
Magnification Charts
Light Sources
TM
Tapered Flex tube features graduated flexibility for easy scope manoeuvrability and navigation.
Industrial
Rigid Borescopes
Ease of Use
System Charts
Reliability
Industrial Videoscopes
Specifications
Videoscope Features and Functions
*1
Scope Variation
Outer diameter
2.4 mm
Product code
1.2 m
4.0 mm
IV8212T
2.0 m
IV8420
IV8420L1
IV8420L2
IV8420U
3.5 m
IV8435
IV8435L1
IV8435L2
IV8435U
1.5 m
4.4 mm
IV8415M
3.0 m
IV8430M
2.0 m
IV8620
IV8620L1
IV8620L2
IV8620U
3.5 m
IV8635
IV8635L1
IV8635L2
IV8635U
5.0 m
IV8650
IV8650L1
IV8650L2
7.5 m
IV8675
IV8675L1
IV8675L2
7.5 m
12.0 m
IV86120
3.0 m
6.0 mm
6.2 mm
8.5 mm
IV8630M
18.0 m
IV86180
3.5 m
3.5 m
IV8835L1
IV8835L2
10.0 m
IV88100L1
IV88100L2
20.0 m
IV88200L1
IV88200L2
30.0 m
IV88300Y
Basic Functions
Angulation directions
Angulation range
Up-down/Right-left
Up-down/Right-left
Up-down/Right-left
Up-down/Right-left
Up-down
Up-down/Right-left
Up-down/Right-left
IV8420 - 130
IV8420L1 - 130
IV8420L2 - 130
IV8420U - 130
IV8212T - 135
IV88300Y - 60
IV8415M - 120
IV8435 - 130
IV8435L1 - 130
IV8435L2 - 130
IV8435U - 130
IV8430M - 120
IV8620 - 150
IV8620L1 - 150
IV8620L2 - 150
IV8620U - 130
IV8630M - 120
IV8635 - 130
IV8635L1 - 130
IV8635L2 - 130
IV8635U - 120
IV8635X1 - 120
IV8650L1 - 110
IV8650L2 - 110
IV8650 - 110
IV8675L1 - 90
IV8675L2 - 90
IV8675/IV8675X2 - 90
IV8835L1 - 140
IV8835L2 - 140
IV86120 - 70
IV88100L1 - 115
IV88100L2 - 115
IV86180 - 50
IV86200L1 - 70
IV86200L2 - 70
Angulation control
Exterior
Insertion tube
Direct manipulation
High durability resin tube
with special processing
Tube flexibiity
Pneumatic pressure
Uniformed stiffness
N/A
*4
N/A*4
N/A*4
Drop-, water- and dust-proof (complies IP55 and Military Standard )*5
N/A
N/A
N/A
N/A
N/A
N/A
Gravity sensor
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Working channel
LCD monitor
N/A
N/A
N/A
N/A
N/A
N/A
N/A
3.7 VGA
Light source
Dimensions
(including
prostrusions)
N/A
N/A
LED
100-240 V, 50/60 Hz
DC
14.8 V
10.8 V
Control unit
Weight (approx.)
N/A
Laser diode
AC
Base unit
N/A
6.5 VGA, daylight-view
LED
Power Supply
N/A
N/A
7.2 V
10.8V
239 (W) X 99 (D) X 215 (H) mm
49(W) X 59(D) X 334(L) mm
1.7 kg with battery
14.8 V
472 (W) X 380 (D) X 522 (H) mm
26 kg with battery
10.8 V
239 (W) X 99 (D) X 215 (H) mm
230 (W) X 100 (D) X 200 (H) mm
2.5 kg with battery (IV8415M)
CCU functions
Menu Language selection
English, German, French, Spanish, Italian, Russian, Korean, Simplified Chinese, Traditional Chinese, Japanese
Exposure control
N/A
N/A
N/A
N/A
N/A
Digital zoom
WiDER Gain
Image Comparision
Input/Output
Terminal
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Composite RCA
Composite RCA
N/A
N/A
N/A
Composite RCA
N/A
N/A
N/A
JPEG/ TIFF
JPEG
JPEG/ TIFF
AVI M-JPEG
AVI MPEG4
AVI M-JPEG
N/A
WAV
WAV
N/A
N/A
N/A
N/A
N/A
Thumbnail display
Image title entry
Search function
USB terminal
Recording medium provided as standard
Internal Memory
N/A
ImageNotepad
Date search
N/A
N/A
N/A
N/A
1 GB CF card
1 GB
ImageNotepad
Title only
Date search
N/A
1 GB CF card
N/A
N/A
N/A
N/A
1 GB
N/A
N/A
Measurement functions
N/A
N/A
N/A
N/A
Scaler measurement
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
*1The IPLEX LT can be upgraded to IPLEX LX. *2 IV86120, IV86180, IV88200L1 and IV88200L2 are not equipped with Tapered Flex tube. *3 The distal end optical adaptor is optional.
*4 The function on the IPLEX UltraLite and IV88 series of the IPLEX LX/IPLEX LT is limited to recognition of the tip adaptor attachement to the scope only. *5 IV88 series are not compliant with Military Standard. *6 Available only for IV8635X1 *7 Optional stereo adaptors are needed.
Industrial Videoscopes
Outer
diameter
Optical Adaptor
Optical System
Field of view
Direction of view
AT120D/NF-IV84
Depth of eld*
4 to 190 mm
Forward
AT120D/FF-IV84
25 to mm
IV84
4.0 mm
120
AT120S/NF-IV84
1 to 20 mm
Side
Note
AT120S/FF-IV84
6 to mm
AT40D-IV86
IPLEX FX
IPLEX LX
IPLEX LT
IPLEX UltraLite
40
200 to mm
AT80D/NF-IV86
8 to mm
80
AT80D/FF-IV86
Forward
35 to mm
AT120D/NF-IV86
4 to 190 mm
IV86
6.0 mm
120
25 to mm
AT80S-IV86
18 to mm
AT120S/NF-IV86
Side
1 to 25 mm
120
AT120S/FF-IV86
5 to mm
AT50D/50D-IV84
Forward/Forward
IV84
4.0 mm
IPLEX FX
IPLEX LX
Side/Side
4 to mm
AT60D/60D-IV86
Forward/Forward
5 to mm
IV86
6.0 mm
60/60
AT60S/60S-IV86
Side/Side
4 to mm
AT120D/NF-IV86X1
Built-to-order
5 to mm
50/50
AT50S/50S-IV84
4 to 190 mm
120
Forward
AT120D/FF-IV86X1
25 to mm
AT80S-IV86X1
80
18 to mm
6.2 mm
IV8635X1
Side
AT120S-IV86X1
120
AT60D/60D-IV86X1
6 to mm
Forward/Forward
5 to mm
Side/Side
4 to mm
Forward
4 to 190 mm
60/60
AT60S/60S-IV86X1
AT80D/FF-IV88
80
AT120D/NF-IV88
IPLEX LT
IPLEX LX
IV88
AT120D/FF-IV88
35 to mm
8.5 mm
25 to mm
120
AT120S/NF-IV88
Industrial
Rigid Borescopes
80
Industrial
Fiberscopes
AT120D/FF-IV86
IPLEX FX
Industrial
Videoscopes
Model
1 to 25 mm
Side
AT120S/FF-IV88
5 to mm
IV88
60/60
Side/Side
4 to mm
2.4 mm
80
Forward
3 to 70 mm
AT120D/NF-IV88Y
120
Forward
4 to 190 mm
AT120D/FF-IV88Y
120
Forward
25 to mm
AT120S/NF-IV88Y
120
Side
1 to 25 mm
AT120S/FF-IV88Y
120
Side
5 to mm
AT60D/60D-IV88Y
60/60
Forward/Forward
5 to mm
60/60
Side/Side
IV8212T
IV88300Y
8.5 mm
AT60S/60S-IV88Y
IV84
4.4 mm
100
IV86
6.0 mm
120
IPLEX MX II
IPLEX FX and IPLEX LX: 2 stage setting for extra-bright illumination
with AC adaptor
4 to mm
12 to 50 mm
Forward
18 to 1,000 mm
Operating Environment
IPLEX FX
IPLEX LX
IPLEX LT
IPLEX UltraLite
IPLEX TX
IPLEX YS
IPLEX MX II
-25 to 100C
IV84 and
V86 series:
-25 to 100C
IV88 series:
-25 to 80C
-25 to 80C
-25 to 100C
-25 to 80C
-25 to 100C
-25 to 80C
1013 to
4052 hPa
1013 to
1317 hPa
WiDER image processing algorithm greatly expands the dynamic range to bring out details in shadows and highlights.
Live image and retrieve image are displayed on half-split screen.
Operating
temperatures
In air
Underwater
Other
parts
than
above
In air
10 to 30C
-21 to 49C
(with battery)
0 to 40C
(with AC
adaptor)
In air
1013 hPa
Title: Up to 30 characters
ImageNotepad: Enables to insert up to 10 descriptions, displayed by categories and contents in addition to the title input.
Insertion
tube
Operating
atmospheric
pressure
Other
parts
than
above
Measures the distance between points. The calculation is based on the known length in the same inspection image.
Measures the distance between the two plotted points.
Underwater*
In air
1013 to 1772
hPa
IV84 series:
1013 to 1368 hPa
IV86 series:
1013 to 1772 hPa
IV88 series:
1013 to 2026 hPa
1013 to
1368 hPa
1013 to
1135 hPa
1013 hPa
Measures the distance between a hypothetical line between two designated positions and the required point.
Measures the depth/height from a hypothetical plane inside three designated positions to the required point.
Liquid resistance
Automarically detects and measures damaged width/depth/area between two specied spots.
Point-to-Line measurement with a parallel line passing on a measurement point.
The cross section of two designated points is represented with computer graphics.
Measures object distance between tip of scope and cursor.
Waterproofing
* Excluding IV8635X1.
Accessories
IPLEX YS
Inspection
Magnification Charts
IPLEX TX
8.5 mm
AT60S/60S-IV88
Tapered Flex tube: Insertion tube with exibility gradually increasing toward the distal end.
5 to mm
System Charts
IPLEX LX
Forward/Forward
Light Sources
AT60D/60D-IV88
Industrial Fiberscopes
Product Lineup
Industrial Fiberscopes
IF6C5X1/IF8C5/IF11C5
Standard Fiberscopes with Excellent Views
Main Features
High Resolution
Original Olympus high-performance optics technology, such as
high-density glass fibre bundles, offers the worlds highest level of
fibrescopic resolution and bright, sharp images.
Tip Angulation
The distal end can be angled in either two or four directions, by
handheld controls (except IF6PD4).
Industrial Fiberscopes
IF6PD4/IF2D5/IF4D5/IF4S5
Ultra-thin Diameters
The ultra-thin flexible fiberscopes (0.64 mm diameter in
minimum) allow you to inspect inside narrow-diameter
hole with 1 mm or more diameter.
Main Applications
Ideal for internal inspection of piping, machinery,
structural members, etc. Highly flexible for versatility
and multi-purpose applications.
Inside water supply/drainage pipes and plant piping
Inside engines of vehicles, aircraft, etc.
Inside machines such as motors and boilers
Inaccessible areas within steel towers, buildings, etc.
Industrial Fiberscope
IF5D4X1-14
Specifically for PT-6 Engine Inspection
Easily change the direction of view by switching the
optical adaptor.
Most suitable for airframe examinations and inspection
of turbine blade.
Authorised by
Pratt & Whitney
as the fiberscope
for PT-6 and
ST-6 engines
maintenance.
Industrial Fiberscopes
IF6PD4/IF2D5/IF4D5/IF4S5
IF5D4X1-14
IF6C5X1/IF8C5/IF11C5
IF6PD4
IF2D5
IF4D5
IF4S5
IF5D4X1
IF6C5X1
IF8C5
IF11C5
0.64
2.4
4.1
4.1
5.0
6.0
8.4
11.3
IF4D57
IF4S57
IF8C510
IF11C510
Scope Variation
Outer diameter
490 mm
IF6PD46
600 mm
IF2D56
700 mm
800 mm
990 mm
Industrial
Fiberscopes
Industrial
Videoscopes
Specifications
IF6C5X18
IF6PD411
1,000 mm
IF2D512
IF5D4X114
IF6C5X113
1,500 mm
IF4D515
IF8C520
IF11C520
3,000 mm
IF6C5X130
IF8C530
IF11C530
58
75
65
Direct viewing
1 to 50 mm
Angulation range
2 to 50 mm
60
49
Side viewing
Direct viewing
(Convertible to side
viewing using
optical adaptor)
Direct/Side viewing
(Convertible using optical adaptor)
4 to 40 mm
5 to 50 mm
5 to 60 mm
Up-Down 120
Illumination system
2,000 mm
2,200 mm
Optical adaptor
Optional
AT50S-IF5D4X1
Provided
49
Side viewing
AT60D/FF-IF6C5
60
Direct viewing
AT30D-IF6C5
30
550 mm
11 mm
26372 mm
AT60D/NF-IF6C5
60
AT100D-IF6C5
100
Direct viewing
4 mm
AT30S-IF6C5
30
21138 mm
AT60S/NF-IF6C5
60
AT60S/FF-IF6C5
60
485 mm
IF11C5
Operating
atmospheric
pressure
9 mm
AT100S-IF6C5
100
AT60D/FF-IF8C5
60
AT30D/NF-IF8C5
30
3070 mm
AT30D/FF-IF8C5
30
60250 mm
AT60D/NF-IF8C5
60
AT100D/NF-IF8C5
100
AT100D/FF-IF8C5
100
9 mm
AT30S-IF8C5
30
4590 mm
AT60S/NF-IF8C5
60
AT60S/FF-IF8C5
60
AT100S/NF-IF8C5
100
3140 mm
AT100S/FF-IF8C5
100
9200 mm
AT60D/FF-IF11C5
60
AT30D/NF-IF11C5
30
3870 mm
AT30D/FF-IF11C5
30
65120 mm
4 mm
Direct viewing
Direct viewing
20 mm
950 mm
3200 mm
Optional
Provided
Operating
temperatures
5102 mm
Side viewing
IF8C5
IF6PD4
IF6C5X1
Provided
2,000 mm
Operating Environment
Optional
IF5D4X1-14
Light Sources
IF6C5X120
Direction of view
Scope
IF8C515
2,000 mm
Field of view
Bending section
IF4S515
840 mm
Side viewing
Direct viewing
Direct viewing
20240 mm
27390 mm
AT60D/NF-IF11C5
60
AT100D/NF-IF11C5
100
570 mm
AT100D/FF-IF11C5
100
16300 mm
55100 mm
1145 mm
Optional
AT30S-IF11C5
30
AT60S/NF-IF11C5
60
AT60S/FF-IF11C5
60
AT100S/NF-IF11C5
100
322 mm
AT100S/FF-IF11C5
100
12250 mm
1140 mm
Side viewing
28440 mm
Insertion
tube
In air
IF2D5
Other parts
than above
In air
10 to 40C
Insertion
tube
In air/
water
1013 hPa
Other parts
than above
In air
Liquid resistance
(against machine oil,
light oil and 5% saline)
Waterproof
Insertion tube
Drip-proof
Control section
IF4D5
IF4S5
10 to 40C
IF5D4X1 IF6C5X1
IF8C5
IF11C5
10 to 80C
10 to 30C
10 to 30C
10 to 50C
1013 hPa
Accessories
1,300 mm
Inspection
Magnification Charts
1,200 mm
System Charts
1,170 mm
Industrial
Rigid Borescopes
Effective length
Main Features
Clear, High-resolution Images
Excellent detail reproductions.
Sharp image is easy on the eyes,
helping reduce inspector fatigue.
370 Rotation
Upward pointer keeps you oriented when using the rotation
function (not all models).
Even Illumination
New tip design ensures more even illumination even when viewing
close-range subjects (not available in direct-viewing scopes and
R160 models).
Outstanding Durability
Stainless steel insertion tube usable at temperatures between
20C and 150C as well as under pressure of up to 1.7
atmospheres (except Miniborescopes and Small Diameter
Borescopes).
Versatile Lineup
Close to 200 models available featuring
various diameters, working lengths,
and viewing directions and angles.
Main Applications
Ideal for inspection of sites that can be accessed
head-on with relatively shallow insertion. Excellent
images are delivered when a video camera is mounted.
For inspecting:
Inside narrow-diameter holes and pipes
Inside cast and hydraulic parts and honing-processed holes
The side wall of a hole with 1mm or more diameter
Inside aircraft engines, hollow walls or buildings, machinery,
structures, etc.
Swing-prism Borescopes
Industrial
Fiberscopes
Industrial
Videoscopes
Product Lineup
MK Modular Mini-scopes
Operating Environment
Standard Borescope
Swing-prism Borescope
Zoom Swing-prism Borescope
Insertion tube
Operating temperatures
Operating atmospheric
pressure
In air
Other parts
than above
In air
Insertion tube
In air
Underwater
Other parts
than above
In air
Liquid resistance
Waterproofing
Small Diameter
Borescope
MK Modular Mini-scope
20 to 150C
10 to 80C
Underwater
10 to 30C
20 to 50C
Light Sources
Accessories
Inspection
Magnification Charts
Engine Borescopes
10 to 50C
700 to 1700 hPa
Up to 1700 hPa
Drip-proof
System Charts
Industrial
Rigid Borescopes
Specifications
Standard Rigid Borescopes
Swing-prism Borescopes
Product code
Outer
diameter
R040-021-000-60
R040-022-045-60
R040-022-090-60
R040-033-000-60
Effective
length
21 cm
22 cm
4.1 mm
R040-033-045-60
Direction
of view
0
Depth
of eld
90
Outer
diameter
R060-031-045SW115-50
60
5 to mm
R060-046-045SW115-50
Effective
length
23 cm
R060-061-045SW115-50
77 cm
R080-023-045SW115-50
23 cm
R060-017-000-50
R080-024-045SW115-20
24 cm
45
R080-033-045SW115-50
33 cm
R080-043-045SW115-50
43 cm
R080-044-045SW115-20
44 cm
90
R060-032-000-50
R060-032-045-50
32 cm
R060-032-090-50
R060-047-000-50
45
6.1 mm
R060-047-045-50
0
47 cm
90
R060-063-000-50
R060-063-045-50
63 cm
R060-063-090-50
R060-078-090-50
78 cm
5 to mm
45
R080-024-045-50
24 cm
R080-024-090-50
R080-024-110-50
45
90
25 cm
R080-028-090-10
28 cm
R080-034-090-50
34 cm
R080-034-110-50
R080-035-090-35
35 cm
R080-044-000-50
90
110
90
44 cm
R080-044-090-50
R080-044-110-50
45
90
45 cm
R080-048-090-10
48 cm
R080-054-090-50
54 cm
R080-054-110-50
R080-064-000-50
90
50
5 to mm
R080-064-045-50
64 cm
8.1 mm
65 cm
R080-074-090-50
74 cm
R080-084-000-50
84 cm
R080-084-090-50
R080-084-110-50
R080-094-110-50
94 cm
R080-104-045-50
R080-104-090-50
104 cm
R080-104-110-50
134 cm
R080-144-000-50
R080-144-045-50
144 cm
25 cm
R100-029-090-10
29 cm
R100-038-000-50
38 cm
R100-039-045-50
62 cm
R080-024-045SW115-50ZM25
24 cm
R080-034-045SW115-50ZM25
34 cm
50
5 to mm
39 cm
R100-039-090-35
R100-039-110-50
R080-044-045SW115-50ZM25
35
10 to mm
R080-054-045SW115-50ZM25
54 cm
R080-064-045SW115-50ZM25
64 cm
50
5 to mm
35
10 to mm
10
80 to mm
50
5 to mm
R100-053-090-35
R100-057-090-10
53 cm
10.1 mm
R100-066-000-50
R100-067-045-50
The Olympus borescopes are ofcially approved for the inspections of various military,
commercial aero and power generating engines, including the following models.
95 cm
R100-095-090-35
R100-095-110-50
R100-099-110-50
99 cm
39 cm
12.1 mm
R160-059-000-35 ILG*
53 cm
59 cm
R160-059-090-35 ILG*
R160-101-000-35 ILG*
RB211/TRENT
GE
GE90/CF34/CFM56/F110
Effective
length
9 cm
Direction
of view
0
Field
of view
45
Depth of eld
MK012-009-000-45
MK012-009-015-53
1.2 mm
9 cm
15
53
1 to mm
Product code
35
10 to mm
16.1 mm
101 cm
122 cm
143 cm
1 to mm
1 to mm
MK017-009-015-80
1.7 mm
9 cm
15
80
1 to mm
MK017-018-015-80
1.7 mm
18 cm
15
80
1 to mm
1 to mm
110
MK017-009-090-62
1.7 mm
9 cm
90
62
45
MK017-018-090-62
1.7 mm
18 cm
90
62
1 to mm
90
MK027-018-000-62
2.7 mm
18 cm
62
1 to mm
MK027-018-015-80
2.7 mm
18 cm
15
80
1 to mm
MK027-018-090-62
2.7 mm
18 cm
90
62
1 to mm
Outer
diameter
Effective
length
Direction
of view
Field
of view
70
3.0 to mm
55
0.8 to 1.6 mm
50
5 to mm
90
90
X009-006-000-70
0
X009-006-000-55C
45
X009-006-015-70
90
35
10 to mm
X009-015-000-70
50
5 to mm
X009-015-015-70
10
115 to mm
X012-006-000-55C
50
5 to mm
90
90
90
110
R120-039-090-35 ILG*
R160-143-090-35 ILG*
Rolls-royce
90
45
R100-095-090-50
R160-143-000-35 ILG*
PW4000/PW2000/JT9D/JT8D/F100
1 to mm
81 cm
R100-095-045-50
R160-122-090-35 ILG*
Engine model
62
90
R100-081-090-35
R160-101-090-35 ILG*
Engine manufacturer
62
67 cm
R100-067-090-50
R120-053-090-35 ILG*
45
R100-067-090-35
44 cm
57 cm
66 cm
8.1 mm
9 cm
43 cm
R100-053-090-50
5 to mm
18 cm
110
R100-043-090-10
25 to 50
1.7 mm
45
R100-039-090-50
45 to 115
47 cm
80 to mm
X009-015-000-55C
R100-025-090-50
Depth of eld
32 cm
10
R080-144-090-50
R100-025-090-35
6.1 mm
R060-062-045SW115-50ZM25
110
R080-134-090-35
Field
of view
1.7 mm
125 cm
Direction
of view
MK017-018-000-62
45
R080-125-090-35
R060-032-045SW115-50ZM25
Effective
length
24 cm
MK017-009-000-62
110
R080-124-110-50
Outer
diameter
R080-124-045-50
124 cm
103 cm
45
R080-124-000-50
R080-124-090-50
83 cm
R080-103-045SW115-50
10 to mm
90
90
64 cm
R080-083-045SW115-50
35
110
R080-065-090-35
R080-084-045-50
45
63 cm
R060-047-045SW115-50ZM25
110
0
5 to mm
53 cm
R080-064-045SW115-20
Product code
110
R080-045-090-35
8.1 mm
R080-063-045SW115-50
R060-024-045SW115-50ZM25
R080-044-045-50
50
110
R080-025-090-35
45 to 115
90
0
R080-024-000-50
R080-064-110-50
50
45
R060-047-090-50
R080-064-090-50
R080-053-045SW115-50
90
Depth of eld
61 cm
R060-077-045SW115-50
90
17 cm
Field
of view
46 cm
R040-033-090-60
R060-017-090-50
Direction
of view
31 cm
6.1 mm
45
R060-017-045-50
Product code
R060-023-045SW115-50
45
0
33 cm
Field
of view
110
6 cm
15 cm
5 to mm
10
115 to mm
50
5 to mm
35
10 to mm
10
115 to mm
0
6 cm
1.2 mm
X012-015-000-70
15 cm
X012-015-015-70
X017-015-000-70
X017-015-015-56C
15 cm
50
5 to mm
10 to mm
50
5 to mm
35
10 to mm
50
5 to mm
X017-025-015-56C
35
10 to mm
X017-025-015-70
50
5 to mm
X017-025-090-70
90
115 to mm
X025-015-000-70
X017-015-015-70
X017-015-090-52C
X017-015-090-70
90
1.7 mm
X017-025-000-52C
X017-025-000-70
10
35
10 to mm
X025-015-090-70
90
X025-025-015-70
X025-025-090-70
15
35
X025-025-000-70
90
0
15
X017-015-000-52C
90
15
X012-015-000-52C
25 cm
X025-015-015-70
90
0
15
X012-006-015-55C
X012-006-015-70
10 to mm
50
15
0.9 mm
X012-006-000-70
35
35
20 to mm
15 cm
15
0
25 cm
70
3.0 to mm
55
0.8 to 1.6 mm
70
55
15
90
3.0 to mm
2.0 to 7.0 mm
0.8 to 1.6 mm
70
3.0 to mm
55
0.8 to 1.6 mm
70
2.0 to 7.0 mm
55
0.8 to 1.6 mm
70
52
3.0 to mm
2.0 to 7.0 mm
1.4 to 2.5 mm
70
4.5 to mm
56
1.4 to 2.5 mm
70
3.0 to 12.0 mm
52
1.4 to 2.5 mm
70
3.0 to 12.0 mm
52
1.4 to 2.5 mm
70
4.5 to mm
56
1.4 to 2.5 mm
70
3.0 to 12.0 mm
4.5 to mm
15
90
2.5 mm
Depth of eld
3.0 to 12.0 mm
70
4.5 to mm
3.0 to 12.0 mm
ILK-7C
ILP-2
ILP-2 Specifications
280 W
Dimensions
ILP-2
Weight
Voltage
2.3 kg
Power consumption
100 W
Dimensions
Weight
2.9 kg
Industrial
Fiberscopes
Power consumption
ILK-D1/ILK-D2
The compact, portable light sources are operated from 12 V DC
supply. They can be mounted on a belt or jacket pocket using a
spring clip.
ILK-7/ILK-7A/ILK-7B
The ILK-7 range of light sources incorporates a 150 W tungstenhalogen lamp offering features necessary to meet most industrial
needs.
ILK-7
ILK-7A
ILK-7B
Power consumption
Dimensions
80 W
105 W
280 W
0.6 kg
250 W
Dimensions
Weight
2.3 kg
KLS-131
The KLS-131 light source can be used as a stand alone system or
as part of the modular borescope system. It is available with either
XLR connector or crocodile clips for car battery use.
Accessories
Power consumption
ILK-D2
12 V DC
Weight
ILK-7 Specifications
Voltage
ILK-D1
Voltage
Light Sources
Voltage*
Industrial
Rigid Borescopes
Industrial
Videoscopes
Light Sources
KLS-131
Power consumption
Dimensions
Weight
Power consumption
Dimensions
Weight
ILH-2A/ILH-2B Specifications
Voltage
Voltage
ILH-2A
ILH-2B
100240 V AC
10-15 V DC
100W
110W
12 V DC
80 W
137 X 53 mm
0.6 kg
UV Light Source
(Recommended Models are Avaliable from our Sales Representatives)
Olympus offers high power UV light sources compatible with all the
light guide cables and fiberscopes for fluorescent testing.
System Charts
KLS-131 Specifications
ILH-2A/ILH-2B
Inspection
Magnification Charts
Light Sources
Compact LED Light Source
ILD-C
The ILD-C offers brightness control and prolonged run time from
its rechargeable internal battery in use with the ILD-2 or ILD-3,
negating the need for external power and providing a completely
portable light source. The provided desktop power supply will
charge the ILD-C at the same time as running the attached ILD-2 or
ILD-3, offering continuous use.
Specifications
Specifications
ILD-3
ILD-C
Power Supply
Dimensions
Weight
Colour Temperature
9 to 19 VDC
Power Consumption
Dimensions
Weight
Run time
Power Supply
6350 K
650 g
ILD-C control unit
Dimensions
Weight
108 g
Run time
Colour Temperature
5500 K
Adapted Scopes
via Connecting
Scope Adaptors
ILD-2
ILD-3
Swing-Prism Borescopes
Swing-Prism Borescopes
Fiberscopes with Olympus Light Guides Fiberscopes with Olympus Light Guides
Engine Borescopes
Accessories
MB-937
Industrial
Fiberscopes
Rigid Sleeve
Industrial
Videoscopes
Alligator
Basket
Grasper
Magnet
MAJ-1354 MAJ-1355 MAJ-1356 MAJ-1357
Industrial
Rigid Borescopes
MAJ-2017
Accessories
Inspection
Magnification Charts
System Charts
IC-1 ( Charger)
Accessories
areas.
Note: This adaptor can be used for the
Industrial fiberscopes as well.
You can change the direction of view by mounting the side viewing
tip adaptor. The diameter of the side viewing tip adaptor is 7.4 mm
MAJ-1566
Industrial
Videoscopes
Accessories
Industrial
Fiberscopes
AI-3C
Scope
SM-R+MF-2
Compatible scope*
AI-3M/AI-4M
AK-1M/SM-R
IF4D5/4S5
IF5D4X1
IF6C5X1
IF8DC5
IF11C5
IF6PD4
IF2D5
IF8D4X2/X3
K12/17/27, X09/12/17/25 Miniborescopes
Series 5 Rigid Borescopes
Camera connector
IF3 Series
IF7D3X3-26, 32
IF13D3-60, IF8D3X2-23
Image Carriers
IF4D4/4S4, IF5D4X1
IF6D4, IF8D4, IF11D4
IF4D5/4S5, IF6C5, IF6C5X1
IF8C5, IF11C5
C-mount adaptor
Magnification ratio
Brightness ratio
MC-04
0.8
1.6
MC-05
1.0
1.0
AI-10C
0.8
1.56
AI-11C
1.0
1.0
AI-12C
1.51
0.44
AI-3C
2.0
0.25
AK2-5C
0.75
1.8
AK2-10C
1.0
1.0
AK2-20C
1.35
0.55
MC-R44
1.85
0.3
MC-R58
2.4
0.17
Multi-purpose Sleeve
Useful to provide a
constant insertion depth of
rigid Borescopes.
Accessories
C-mount Adaptors
Inspection
Magnification Charts
OM Adaptors*1
System Charts
Light Sources
Industrial
Rigid Borescopes
* Built-to-order
IPLEX TX
Magnification ratio (x)
Fiberscopes
Industrial
Videoscopes
10
9
8
7
6
12
X009/X012-XXX-000
X009/X012-XXX-015
X017/X025-XXX-000
10
X017/X025-XXX-015
X017/X025-XXX-090
Industrial
Fiberscopes
0.8
0.7
0.6
IF4D5
0.5
IF4S5
0.4
AT100D-IF6C5
0.3
AT60D/FF-IF8C5
AT100D/FF-IF8C5
0.2
AT60D/FF- IF11C5
AT100D/ FF-IF11C5
0.1
0
2
5 6 7 8 9 10
20
40
60
80 100
200
10
11
12
13
MK Modular Mini-Scopes
Light Sources
Industrial
Rigid Borescopes
AT60D/FF-IF6C5
30
30
20
20
MK17 09 00 62
MK17 18 00 62
MK27 18 00 62
Angle of view 30
MK17 09 90 62
MK17 18 90 62
MK27 18 90 62
Angle of view10
10
9
8
7
6
10
Accessories
8
7
6
MK12 09 00 45
MK12 09 15 53
Angle of view 55
(8 mm, 10 mm
scope)
Angle of
view 55
Angle of view 50
(5.5 mm
(4 mm scope)
scope)
0.5
1
0.8
0.7
0.6
MK17 09 15 80
MK17 18 15 80
MK27 18 15 80
0.5
Angle of view 60
(4 mm scope)
0.4
0.4
0.3
0.3
2
6 7 8 910
20
40
60
80 100
200
300
7 8 9 10
20
40
Inspection
Magnification Charts
1
0.9
0.8
0.7
0.6
System Charts
System Charts
Videoscopes
IPLEX FX
Internal Battery
AC Adaptor
USB Flash
Drive
Battery Charger
Compact Flash
Recording Card
PC
Base Unit
Microphone
LCD Extension
Cable
USB Keyboard
Rigid Sleeve
Scope Unit
Guide Tube
(for 5.0 m/7.5 m/12.0 m/18.0
m length insertion tube)
Optical Adaptor
Working Channel
Scope Unit
IPLEX LX / IPLEX LT
Internal Battery
AC Adaptor
USB Flash
Drive
Battery Charger
IPLEX Viewer
Software
PC
Rigid Sleeve
Optical Adaptor
Guide Tube
(for 7.5 m length insertion tube)
IPLEX UltraLite
AC Adaptor
SD/SDHC Card
Tripod Adaptor
Internal Battery
USB Cable
Battery Charger
PC
Rigid Sleeve
Optical Adaptor
IPLEX Viewer
Software
IPLEX TX
AC Adaptor
Internal Battery
USB Flash
Drive
Battery Charger
Industrial
Fiberscopes
PC
IPLEX YS
Internal Battery
Battery Charger
Compact Flash
Recording Card
USB Flash
Drive
Microphone
LCD Extension
Cable
Length Indicator
IPLEX Viewer
Software
PC
USB Keyboard
Pushing Rod
Centring Device
Optical Adaptors
IPLEX MX II
USB Flash
Drive
Internal Battery
Battery Charger
Accessories
AC Adaptor
PC
Rigid Sleeve
TV Observation System
C-mount
Adaptor
Light Sources
AC Adaptor
Industrial
Rigid Borescopes
Air Compressor
CCD Camera
Video Monitor
Inspection
Magnification Charts
CO2 Cartridge
VCR
Rigid Borescope
Video Printer
Photograph System
Digital Camera Adaptor
Olympus
Mirrorless Camera
System Charts
Industrial Fiberscope
Industrial
Videoscopes
System Charts
www.olympus-ims.com
2012
B370FBE-092012