Professional Documents
Culture Documents
Asphalt Primer: Meets The Requirements of ASTM D 41, Type II
Asphalt Primer: Meets The Requirements of ASTM D 41, Type II
Asphalt Primer: Meets The Requirements of ASTM D 41, Type II
Component
PR
Use:
Primer
Type
SU
Substrate
Type:
Multi-Ply
APP
Multi-Ply
BUR
This product may be used as a component in the following systems. Please reference product application for specific installation methods and information.
HA
Key:
HA = Hot Applied
CA
CA
SBS
HW
HA
CA
HW
SA
HW = Heat Weldable
MF
PVC
FA
MF
FA
MF
EPDM
FA
BA
SA = Self Adhered
TPO
Single Ply
System Compatibility
MF = Mechanically Fastened
FA = Fully Adhered
BA = Ballasted
Installation/Application
< 350 g/l (calculated)
Physical Properties
Property
Consistency @ 77F (25C)
Asphalt Primer
Spray Grade
Spray
Brush
All equipment can be cleaned with mineral spirits. Use care when
handling solvents. Clean hands with waterless hand cleaner.
* Coverage, open and dry time rates can vary dramatically depending on the particular substrate
and environmental conditions. Coverage rates stated herein are approximate only.
If FM Global or UL approval is required, consult specific RoofNavSM or the UL Certifications
Directory for specific application rates.
Storage
Shelf Life
Storage Conditions
Temperature Range
Refer to the Material Safety Data Sheet and product label prior to using this product.
The Material Safety Data Sheet is available by calling (800) 922-5922 or on the Web at
www.jm.com/roofing.