Professional Documents
Culture Documents
Sikadur 752
Sikadur 752
Sikadur 752
Edition 04,2009.
Identification no. 4.2.005
Version No. 06
Sikadur 752
Sikadur 752
Low viscosity 2-component
injection resin
Construction
Description
Uses
Sikadur 752 is used to fill and seal cavities and cracks in structural components such as columns, beams, foundations, decks and water-retaining structures. It not only forms an effective barrier against water infiltration, but also bonds the concrete sections, together, thereby restoring
original structural strengths.
Advantages
Certificates
Solvent-free
Shrinkage-free hardening
Product Data
Colour
Yellowish/ transparent
Packaging
1 & 2 kg set
Storage conditions
+5 C to +30 C
Shelf life
Technical Data
Density
~ 1.1 kg/litre.
Viscosity
290 c. poise at 20 C
o
o
130 c. poise at 30 C
Mixing ratio
Temp. C
Time
40
15 min.
30
30 min.
20
60 min.
Note- For extended pot life Comp A&B can be stored in cool room prior
to mixing
Ultimate compressive
>50 N/mm
strength
Ultimate flexural
>45 N/mm
strength
>20 N/mm
Bond strength
To concrete
Construction
Tensile strength
Application
Instructions for use
Transportation class
Waste disposal
Important notes
Product may cause skin irritations. Wear gloves and goggles. If the
material is accidentally splashed into the eyes, flush immediately with
water and seek medical attention without delay.
Toxicity
Disclaimer
The information, and, in particular, the recommendations relating to the application and end-use
of Sika products, are given in good faith based on Sikas current knowledge and experience of
the products when properly stored, handled and applied under normal conditions in accordance
with Sikas recommendations. In practice, the differences in materials, substrates and actual site
conditions are such that no warranty in respect of merchantability or of fitness for a particular
purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either
from this information, or from any written recommendations, or from any other advice offered. The
user of the product must test the products suitability for the intended application and purpose.
Sika reserves the right to change the properties of its products. The proprietary rights of third
parties must be observed. All orders are accepted subject to our current terms of sale and
delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the
product concerned, copies of which will be supplied on request.