Professional Documents
Culture Documents
Column Base Plate Design (Bs5950-1:2000) : Project Job Ref
Column Base Plate Design (Bs5950-1:2000) : Project Job Ref
Job Ref.
411
Section
Sheet no./rev.
Date
RONY
01-Aug-15
10
Chk'd by
Date
App'd by
Date
2 00
1 80
1 20.0
3 75
350
Fc = ;12.0; kN (Tension)
Bending moment;
Shear force;
Fv = 1.0 kN
Column details
Column section;
Depth;
D = 200.0 mm
Breadth;
B = 120.0 mm
Flange thickness;
T = 10.0 mm
Web thickness;
t = 10.0 mm
Design strength;
10 mm FW;
10 mm FW;
Baseplate details
Steel grade;
S275
Depth;
Dp = 350 mm
Breadth;
Bp = 375 mm
Thickness;
tp = 20 mm
Design strength;
Bolt spacing;
sbolt = ;180; mm
15 0
200.0
10 0
40
Project
Job Ref.
411
Section
Sheet no./rev.
Date
RONY
01-Aug-15
Edge distance;
20
Chk'd by
Date
App'd by
Date
e1 = 40 mm
S275
bap = 100 mm
tap = 15 mm
Design strength;
E = 200 mm
fcu = 40 N/mm2
M = 0.6fcuBpcx(h-x/2) - Fc(h-Dp/2)
Factor a;
Factor b;
Constant c;
Tf = Cf - Fc = 126.1 kN
Therefore the bolts are in tension
m = L1 - e1 - 0.8swf = 27.0 mm
Moment in plate;
mt = Tf m = 3405950 Nmm
Lf = L1 - e1 = 35.0 mm
Plate thickness
Plate thickness required;
tp = 20 mm
PASS - Plate thickness provided is adequate (0.964)
Flange weld
Tension capacity of flange;
Project
Job Ref.
411
Section
Sheet no./rev.
Date
RONY
01-Aug-15
30
Chk'd by
Date
App'd by
Date
Tensile strength;
Anchor plates
Force per anchor plate;
dh = 22 mm
Bearing capacity;
dbh = 30.0 mm
Bending capacity;
Aplan_eff = [sbolt(Nbolt/2-1)+bap](bap+2E)+E2+2bapE-(Nbolt/2)bap2
Aplan_eff = 285664 mm2
For tension failure pull-out, effective tensile area; At_eff = Aplan_eff = 285664 mm2
Tensile strength of concrete;
pt = 1.00 N/mm2
Pt = pt At_eff = 285.7 kN
PASS - Holding down bolt anchorage is adequate (0.442)
Project
Job Ref.
411
Section
Sheet no./rev.
Date
RONY
01-Aug-15
40
Chk'd by
Date
App'd by
Date
= 0.30
Pv = Cf = ;34; kN
PASS - Frictional shear capacity is adequate (0.029)