Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 4

STUDENT AND AUDIT CERTIFICATION

Student
"I admit that this industrial report as the result of my own work except descriptions,
images and summary of each of them I have explained the source.
Signature

Name
Registration Number
Date

: Zulkarnain bin Mohammad


: 10DKM13F1013
: 17th April 2015

Audit
I declared that I have examined this report. My opinion this report is sufficient in
terma of scope and quality for the fulfilment of the award of the Diploma in
Mechanical Engineering of Ministry of Education Malaysia.
Signature

Name

: Alexander Selvaraj S/O Thangaveloo

Date

Senior Manager of Mechanical Department


: 17th April 2015

POLITEKNIK SEBERANG PERAI


DECEMBER 2014 SESSION

BIODATA

Name
Registration Number
I/C Number
Course
Address

Contact Number
Company Address
Office Number
Duration of Training
Session

: Zulkarnain bin Mohammad


: 10DKM13F1013
: 950613-08-6249
: Diploma in Mechanical Engineering
: 129 Kampung Pakri,
Bukit Kerajaan,
33000 Kuala Kangsar,
Perak Darul Ridzuan.
: 012-4734025
: Perak-Hanjoong Simen Sdn. Bhd.,
33700 Padang Rengas,
Perak Darul Ridzuan.
: 05-7596000
Fax : 05-7775424
: 1st December 2014 17th April 2015
: December 2014

DEDICATION

I am using this opportunity to express my gratitude to everyone who supported


me throughout the course of this assigned project. I am thankful for their aspiring
guidance, invaluably constructive criticism and friendly advice during the industrial

training. I am sincerely grateful to them for sharing their truthful and illuminating
views on the issues related to the assignment.
I express my warm thanks to Perak-Hanjoong Simen for letting me undergo my
industrial training in this cement plant.
I would also like to thank to my supervisor and all the people who provided me
with the facilities being required and conductive conditions for me to complete this
report

APPRECIATION

I would like to thank for Perak-Hanjoong Simen Sdn. Bhd. for letting me to
undergo my industrial training in their cement plant. This industrial training has
started from 1st December 2014 till 17th April 2015 for about 20 weeks.
I have taken efforts in this project. However, it would not have been possible
without the kind support and help of many individuals. I would like to extend my
sincere thanks to all of them.
I am highly indebted to Senior Mechanical Manager, Mr. Alexander Selvaraj S/O
Thangaveloo for assigning this project. I would like to thank for the constant
guidance and constant supervision as well as for providing necessary information
regarding the project & also for support in completing the project.
I would like to thank Mr. Palani for helping me for my project assigned. From
him, I have learnt how the screw type air compressor working principle.
I would like to express my gratitude towards my parents & friends for their kind
co-operation and encouragement which help me in completion of this project.

I would like to express my special gratitude and thanks to the expert workers for
giving me such attention and time in developing the project and people who have
willingly helped me out with their abilities.

You might also like