Professional Documents
Culture Documents
LCD Datasheet
LCD Datasheet
LCD Datasheet
T-RS-084
Version No.
SPECIFICATIONS
CUSTOMER
APPROVED
CHECKED
GW GROUP INC.
CHECKED
APPROVED
CHECKED
Mike Zhu
GW GROUP INC.
PREPARED
Joice Yang
V0.0
RECORDS OF REVISION
STANDARD PRODUCT
DOC.
SPEC.
DATE
REVISED NO.
2008.11.24
MODULE NO.
REVISED DESCRIPTIONS
INITIAL ISSUED
T240320-64
PREPARED
Joice Yang
CHECKED
APPROVED
Mike Zhu
STANDARD
DOC.
PRODUCT
SPEC.
MODULE
NO.
T240320-64
PAGE 1/14
CONTENTS
1.
GERENAL SPECIFICATIONS
----------------------------
2.
FEATURES
-----------------------------------------
3.
MACHANICAL SPECIFICATIONS
-------------------------
4.
-------------------------
5.
ELECTRICAL CHARACTERISTICS
------------------------
6.
------------------------
7.
ELECTRO-OPTICAL CHARACTERISTICS
TIMING CHARACTERISTICS
9.
------------------
---------------------------
PIN ASSIGNMENT
------------------------------------
10.
PIN NO
------------------------------------
10
11.
BLOCK DIAGRAM
------------------------------------
10
12.
OUTLINE DIMENSIONS
----------------------------------
11
13.
14.
RELIABILITY
15.
16.
------------
12
----------------------------------------
12
- -- - - - - - - -- - - - - - - - - - - - -
13
--------------------------------
13
GW GROUP INC.
STANDA
MODULE
PRODUCT SPEC.
RD DOC.
NO.
T240320-64
PAGE 2/14
1. GENERAL SPECIFICATIONS
1-1 SCOPE:
This specification covers the delivery requirements for the liquid crystal display delivered by GW
GROUP INC. to Customer
1-2 PRODUCTS:
Liquid Crystal Display Module (LCM)
1-3 MODULE NAME:
T240320-64
2. FEATURES
(1) Display Type: TFT-LCD,TN, Transmissive, 9 oclock, Normally With
(2) Driving Method: 1/320 duty
(3) Built-in controller: SSD1289
(4) With LED Backlight
3. MACHANICAL SPECIFICATIONS
ITEM
SPECIFICATIONS
UNIT
OUTLINE DIMEMSIONS
mm
ACTIVE AREA
mm
RESOLUTION
240RGB(H) x 320(V)
pixel
PIXEL ARRANGEMENT
PIXEL PITCH
DISPLAY COLOR
0.2025(H) x 0.2025(V)
262 K
BACKLIGHT
WEIGHT
Approx. 32
GW GROUP INC.
mm
color
STANDA
RD DOC.
PRODUCT MODULE
NO.
SPEC.
T240320-64
PAGE
3/14
STANDARD VALUE
MIN
TYP
MAX
INPUTVOLTAGE RANGE
VCC-GND
-0.3
+4.6
OPERATION TEMPERATURE
TOPR
- 20
+70
STORAGE TEMPERATURE
TSTG
- 30
+80
ITEM
UNIT
5. ELECTRICAL CHARACTERISTICS
(
ITEM
SYMBOL
CONDITIONS
VCC-GND
Ta=-252 )
STANDARD VALUE
UNIT
MIN
TYP
MAX
2.8
VIH
0.8*VCC
VCC
VIL
-0.3
0.2*VDDIO
VOH
IOH=-100uA 0.8VDDIO
VOL
IOL=100uA
0.2VCC
IF
NOTE
10
15
CURRENT CONSUMPTION
NOTE :
1.The measure without backlight.
2.The test screen:
AAAAAAAAA
BBBBBBBBB
CCCCCCCCC
.
..
GW GROUP INC.
mA
STANDARD
DOC.
PRODUCT
SPEC.
MODEL
NO.
T240320-64
PAGE 4/14
SYMBOL
SPECIFICATIONS
UNIT
FORWARD VOLTAGE
VF
3.2
FORWARD CURRENT
IF
120
mA
PARAMETER
GW GROUP INC.
STANDARD
DOC.
PRODUCT
SPEC.
MODEL
NO.
T240320-64
PAGE 5/14
8. ELECTRO-OPTICAL CHARACTERISTICS
( Ta=25)
ITEM
VIEWING ANGLE
SYMBOL
1
2
3
CONDITIONS
Cr 10
B/L ON
MIN
TYP
60
60
MAX
40
60
200
Cd/m2
*1
(2)
ms
(3)
CIE
Brightness @ White
(CENTER POINT)
BL
CONTRAST RATIO
Cr
150
180
RESPONSE TIME(rise)
RESPONSE TIME(fall)
Tr
Tf
0.29
NormalViewing 0.31
Angle
0.62
B/L ON
0.30
0.26
0.55
0.11
0.08
10
15
0.31
0.33
0.64
0.32
0.28
0.57
0.13
0.10
0.33
0.35
0.66
0.34
0.30
0.59
0.15
0.12
White
Color
chromaticity
Red
Green
Blue
If120mA
Wx
Wy
Rx
Ry
Gx
Gy
Bx
By
GW GROUP INC.
UNIT
NOTE
deg.
(1)
STANDARD PRODUCT
DOC.
SPEC.
MODEL
NO.
T240320-64
GW GROUP INC.
PAGE
6/14
STANDARD PRODUCT
DOC.
SPEC.
MODEL
NO.
T240320-64
PAGE
NORMAL
LIGHT SOURCE
PHOTO-METER
(*1)
0
=30
LCD PANEL
(*2)
*1.Light source position for measuring the reflective type of LCD panel
*2.Light source position for measuring the transflective / transmissive types of LCD panel
GW GROUP INC.
7/14
STANDARD
DOC.
PRODUCT
SPEC.
MODEL
NO.
T240320-64
PAGE 8/14
9. TIMING CHARACTERISTICS
9-1 Parallel Write Interface Characteristics (80 Mode)
(TA = -20 to 70C, VDDIO = 1.65V to 3.6V, VDDEXT = 1.65V to 1.95V, REGVDD = L)
Symbol
tcycle
tcycle
tAS
tAH
tDSW
tDHW
tACC
tOH
PWCSL
PWCSH
PWCSL
PWCSH
tR
tF
Parameter
Clock Cycle Time (write cycle)
Clock Cycle Time (read cycle)
Address Setup Time
Address Hold Time
Data Setup Time
Data Hold Time
Data Access Time
Output Hold time
Pulse Width /CS low(write cycle)
Pulse Width /CS high (write cycle)
Pulse Width /CS low (read cycle)
Pulse Width /CS high (read cycle)
Rise time
Fall time
Min
100
1000
0
0
5
5
250
100
50
50
500
500
-
Typ
-
GW GROUP INC.
Max
4
4
Unit
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
STANDARD
DOC.
PRODUCT
SPEC.
MODULE
NO.
T240320-64
PAGE 9/14
FUNCTION DESCRIPTIONS
DATA BUS
DATA BUS
DATA BUS
DATA BUS
GROUND
POWER SUPPLY
CHIP SELECT SIGNAL
DATA / COMMAND CONTROL SIGNAL
WRITE CONTROL SIGNAL
READ CONTROL SIGNAL
NC
NC
NC
NC
BACK LIGHT LED+
BACK LIGHT LED1BACK LIGHT LED2BACK LIGHT LED3BACK LIGHT LED4BACK LIGHT LED5BACK LIGHT LED6DATA BUS
DATA BUS
DATA BUS
DATA BUS
DATA BUS
DATA BUS
DATA BUS
DATA BUS
DATA BUS
RESET SIGNAL INPUT
POWER SUPPLY
POWER SUPPLY
GROUND
DATA BUS
DATA BUS
DATA BUS
GW GROUP INC.
SYMBOL
DB8
DB9
DB10
DB11
GND1
VCC1
/CS
RS
/WS
/RD
NC
NC
NC
NC
LED-A
LED-1
LED-2
LED-3
LED-4
LED-5
LED-6
DB12
DB0
DB1
DB2
DB3
DB4
DB5
DB6
DB7
/RESET
VDD
VDD
GND
DB13
DB14
DB15
STANDARD
DOC.
PRODUCT
SPEC.
MODULE
NO.
T240320-64
PAGE 10/14
TFT 3.2"
240(RGB)X320
View Direction
IRON
(9 o'clock)
Reflector
COMPONENT AREA
K6
K5
K4
K3
K2
K1
A
G2
G4
LED-K1
LED-K2
G317
G319
G318
G320
LED-K3
LED-A
LED-K4
LED-K5
S240S1
LED-K6
CIRCUIT DIAGRAM
SSD1289
Interface Pin
1
37
GW GROUP INC.
(3.72)
(1.72)
1
64.800.2(TFT-A.A)
77.700.2(BL)
GW GROUP INC.
74.40
0.2(TFT)
25.720.3
2.00
3.80
0.3
2.000.3
35.10
51.430.2
P0.8*36=28.80
K6
K5
K4
K3
K2
K1
A
(3.15)
37
REMOVE TAPE
COMPONENT
H=1.0MAX
1.00
37
33.10
COMPONENT AREA
Reflector
IRON
0.50
1.50
37
0.3mm
PI TAPE
IRON
2.000.3
(8.16)
W=0.40
SSD1289
1.50
(9 o'clock)
TFT 3.2"
240(RGB)X320
View Direction
52.04
54.040.1
MODULE
NO.
130
G B
(3.22)
48.600.2(TFT-A.A)
3.100.25
3-0.850.1
PRODUCT
SPEC.
1.810.3
(1.15)
0
1.0
55.040.2(BL)
3-?
52.740.2(TFT)
STANDARD
DOC.
T240320-64
PAGE 11/14
13.OUTLINE DIMENSIONS
23.290.5
0.500.3(FPC TO BL)
A
K1
K2
K3
K4
K5
K6
1.50
1.70
0.3
75.000.1
STANDARD
DOC.
PRODUCT
SPEC.
MODEL
NO.
T240320-64
PAGE 12/14
SYMBOL
CONDITIONS
OPERATING TEMPERATURE
TOPR
-20+70
STORAGE TEMPERATURE
TSTG
-30+80
See Note
HUMIDITY
CRITERION
NO DEFECT IN DISPLAYING AND
OPERATIONAL FUNCTION
NO DEFECT IN DISPLAYING AND
OPERATIONAL FUNCTION
WITHOUT CONDENSATION
Note:
(1) Ta 40, 90%RH Max.
(2) Ta40, Absolute humidity must be lower than the humidity of 90%RH at 40
15. RELIABITY
14-1 RELIABILITY TEST
ITEM
CONDITIONS
CRITERION
OPERATING
TEMPERATURE
STORAGE
TEMPERATURE
HUMIDITY
VIBRATION
96HRS
THERMAL
SHOCK
*NOTE:
Every test items shall meet following criteria:
(1) Sample subjected to the tesets shall be Not operating condition.
(2) Evaluation should be made 4 hours after return to the room temperature(at 255,
605%RH).
(3) The samples subject to the tests must not have dew condensation.
(4) All of the dots should not be blurred.
(5) All dots should be usually displayed.
(6) The Current Consumption should be Twice than initial value or less.
(7) The Contrast Ratio should be more than 50% of initial value.
GW GROUP INC.
STANDARD
DOC.
PRODUCT
SPEC.
MODEL
NO.
T240320-64
PAGE 13/14
GW GROUP INC.
STANDARD
DOC.
PRODUCT
SPEC.
MODEL
NO.
T240320-64
PAGE 14/14
Caution
(1) Dangerous. Do not shock glass because glass can break.
(2) If module breaks, do not touch it directly.
(Glass could stick or cut skin.)
(3) Do not swallow Liquid Crystal.
(In case of broken LCD panel, do not swallow liquid crystal even if there is no proof that
liquid crystal is poisonous.)
(4) If liquid crystal is exposed to skin, wash the area thoroughly with alcohol or soap.
(5) When disposing of the product, please observe industrial waste disposal laws in each
country and district.
(6) In case of injury, give immediate treatment and consult with a doctor.
(7) This product is constructed precisely. Dont disassemble or modify.
Neglecting this mark can cause injury to humans and damage to materials.
GW GROUP INC.
Number
L-QA-113
Executive Dept.
QC Dept.
Date
2002.4.23
Authorized by
QC Dept.
COG LCM
Finished Product Checking Approval for
COG LCM
Customer approval
Approved Checked
GW GROUP INC.
Manufa
Approved Checked
-ctured
GW GROUP INC.
Manufa
-ctured
COG LCM
2002 4 23 A
11
L-QA-113
Standard
Item
COG LCM
Finished Product Checking Approval for COG LCM
Number
L-QA-113
Page
Purpose
COG LCM
To confirm the quality of the finished product for COG LCM.
Scope
COG LCM
All LCM for COG type
Checking condition
The environmental temperature is based on the general temperature.
/
Both power and drive voltages are based on what the drawing has required.
3015030cm
As to the appearance check ,the angle between the eye and product is30150. The
distance should be less than 30 cm.
Inspection condition is based on the viewing direction on the drawing.
LCM with backlight is needed to check the brightness. Every week we will check 2 pcs
for each model.
To inward the seal line with 0.4mm is so called viewing area. As to the rest, it is so called
non-viewing area.
Checking Standard
MIL-STD-105D
Appropriate standards: MIL-STD-105D List, General Checking Standard II, Random
Checking Plan.
Defects Category
AQL 1.5
Minor defects are based on AQL 1.5
AQL0.65
Major defects are based on AQL 0.65
AQL0.4
Serious defects are based on AQL 0.4
1.5
Synthetic defects are based on AQL 1.5
Attachment
COG LCM
Model list for COG LCM
Standard
Item
COG LCM
Finished Product Checking Approval for COG LCM
Number
Checking Item
Checking Standard
L-QA-113
Page
Category
1-1 Dirt
NO
Size
<0.3
Acceptable Quantity
( 1PCS
Minor defect
2 ) No limitEach
LCM only allows 2 spots
0.2
*
The size is based on the Spot List.
Appearance
The black spots next to the seal line have to been set
with customers device. If these spots are obvious,
Standard
Item
COG LCM
Finished Product Checking Approval for COG LCM
Number
Checking Item
Checking Standard
L-QA-113
Page
Category
1-3 Bubble
Size
Acceptable Quantity
V.A
0.4
0.4
0.6
0.6
Minor defect
No limit
Appearance
1-4 Polarizer penetration
1-4-1
0.2 5
Standard
Item
COG LCM
Finished Product Checking Approval for COG LCM
Number
Checking Item
Checking Standard
L-QA-113
1-5 Fingerprint
Page
Category
Minor defect
1-6-1 1
Minor defect
The panel indentaion can not be more than 1 mm.
1-6-2 4 0.7
General broken length can not be more than 4 mm and
the width can not be more than 0.7 mm.
Appearance
Standard
Item
COG LCM
Finished Product Checking Approval for COG LCM
Checking
Item
Number
L-QA-113
Page
Category
Checking Standard
1-8 Rough and uneven in the panel surface
2 2
0.4
Any rough and uneven on the scope with 2 mm from the
edge of the panel is acceptable. Over this scope, only one
rough or uneven which its is less than or equal to 0.4 mm
is acceptable.
Minor defect
Appearance
1
1-9 Seal line
1-9-1
Seal line should be fully displayed.
1-9-2 0.4 1.5
Seal line should be less than or equal to 0.4mm. If it is
more than or equal to 1.5mm, it is not acceptable.
Minor defect
Standard
Item
COG LCM
Finished Product Checking Approval for COG LCM
Number
Checking Item
Checking Standard
L-QA-113
Page
Category
Appearance
1-11
Unsuccessful attachment for polarizer
1-11-1
1.2
Minor defect
Standard
Item
COG LCM
Finished Product Checking Approval for COG LCM
Number
Checking Item
Checking Standard
L-QA-113
Page
Category
1-12
Scratch, water vestige and fiber
L
Acceptable Quantity
No limit
3 L
3 L2
Scratch
Minor defect
water
vestige
Appearance
fiber
pervious to light.
1-13-2 Silicon
Minor defect
The front polarizer can not have any silicon.
Standard
Item
COG LCM
Finished Product Checking Approval for COG LCM
Number
Checking Item
Checking Standard
L-QA-113
Page
Category
1-13-3 Silicon
Silicon coating can not have any fingerprint, dirt
or imperfection.
1-13-4 Silicon
Silicon coatings height can not be more than
front polarizers.
Minor defect
Appearance
1-14 FPC
1-14-1 FPC
FPC broken circuit or warp is not acceptable.
1-14-2 FPC
Any dirt on FPC is not acceptable.
1-14-3 FPC
Broken attaching hole and folded vestige on FPC
is not acceptable.
1-14-4 FPC 0.5mm
The of FPCs rough or uneven can not be more
than 0.5mm
1-14-5 FPC PIN
Pins thickness is based on the drawing.
1-14-6 FPC
All the passive components on FPC are based on
the drawing. Any lack of these components is
not acceptable.
Minor defect
Standard
Item
COG LCM
Finished Product Checking Approval for COG LCM
Number
Checking Item
Checking Standard
L-QA-113
Page
Category
Minor defect
Appearance
Minor defect
2-1 /
The original character or icons can not be displayed.
Serious defect
2-2 //
The lack of vertical, horizontal or cross circuit.
2
Display check
Serious defect
2-3
No display.
Serious defect
Standard
Item
Number
COG LCM
Finished Product Checking Approval for COG LCM
Checking Item
Checking Standard
L-QA-113
Page
Category
2-4
Abnormal display
Serious defect
2-5
The color-irregularity during light-on process
Serious defect
Display check
NO
Size
0.1
0.10.2
Acceptable
Quantity
No limit
Major defect
0.2
3-1
Incorrect module size is not acceptable.
3-2
The size based on the drawing.
3
Serious defect
Standard
Item
COG LCM
Finished Product Checking Approval for COG LCM
Checking Item
Checking Standard
Voltage
measurement
Number
Current
consumption
L-QA-113
Page
Category
4-1
Voltage test is based on that of the main screen.
4-2
5-1 QC
6-1
7-1 ()
Others