Professional Documents
Culture Documents
Timken Bearing Engineering Manual
Timken Bearing Engineering Manual
www.timken.com
Price: USD $75
TIMKEN
Overview
FRICTION MANAGEMENT
SOLUTIONS A TOTAL SYSTEMs
APPROACH
Your industry is ever-changing, from the evolution of advanced
motion-control systems to the demands from your customers.
Turn to us to stay ahead of the curve.
We use our friction-management know-how to offer solutions
that maximize performance, fuel-efficiency and equipment
life. We also offer integrated services that extend well
beyond bearings, including condition monitoring systems and
services, encoders and sensors, seals, premium lubricants and
lubricators.
Timkens wide range of friction management solutions can
include evaluations of your entire system not just individual
components. This provides cost-effective solutions to help you
reach specific application goals. Working together, we help
you meet these demands and ensure all your systems
run smoothly.
TIMKEN
Overview
specialists from across the globe who are experts in mechanical power transmission, antifriction bearing design,
tribology, metallurgy, clean steel production, precision
manufacturing, metrology, and engineered surfaces and
coatings.
TIMKEN
Overview
QUALITY SOLUTIONS
As the only premium bearing manufacturer to also make superclean, high-alloy bearing steels, we understand the critical
quality link between materials and product performance.
We also strictly adhere to the Timken Quality Management
System in every plant worldwide, so each bearing product
meets the same high performance standards no matter
where in the world it is manufactured.
TIMKEN
Overview
Catalog FEATURES
Dimensional and load rating data, within the various types and
styles of bearings, is organized by size.
ISO and ANSI/ABMA, as used in this publication, refer to
the International Organization for Standardization and the
American National Standards Institute/American Bearing
Manufacturers Association.
Note
Product performance is affected by many factors beyond the control
of Timken. Therefore, the suitability and feasibility of all designs and
product selection should be validated by you. This catalog is provided
solely to give you, a customer of Timken or its parent or affiliates,
analysis tools and data to assist you in your design. No warranty,
expressed or implied, including any warranty of fitness for a particular
purpose, is made by Timken. Timken products and services are sold
subject to a Limited Warranty.
You can see your Timken engineer for more information.
TIMKEN
Overview
STORAGE
contaminants such as, but not limited to, dust, dirt, harmful
vapors, etc.
TIMKEN
Overview
Most bearing
types are typically
shipped protected
with a corrosionpreventive compound
that is not a lubricant.
Such bearings may be
used in oil-lubricated
applications without
removal of the corrosionpreventive compound. When
using some specialized grease
lubrications, it is advisable to remove
the corrosion-preventive compound before
packing the bearings with suitable grease.
Some bearing types in this catalog are pre-packed with
general purpose grease suitable for their normal application.
Frequent replenishment of the grease may be necessary for
optimum performance. Care must be exercised in lubricant
selection, however, since different lubricants are often
incompatible.
When specified by the customer, other bearings may be
ordered pre-lubricated.
Upon receipt of a bearing shipment, ensure that the bearings
are not removed from their packaging until they are ready
for mounting so that they do not become corroded or
contaminated. Bearings should be stored in an appropriate
atmosphere in order that they remain protected for the
intended period.
Warning
INTRODUCTION
INTRODUCTION
Timken is a leader in the advancement of bearing
technology. Expert craftsmanship, well-equipped
production facilities, and a continuing investment in
Where more complex bearing applications are
Bearing Types
Tapered Roller
Bearing
Thrust Tapered
Roller Bearing
Good
Unsuitable
Excellent
Unsuitable
Spherical Roller
Bearing
Thrust Spherical
Roller Bearing
Radial
Ball Bearing
Thrust Ball
Bearing
Angular Contact
Ball Bearing
Good
Unsuitable
Good
Poor
Fair
Good
Excellent
Unsuitable
Good
Fair
Excellent
Fair
Excellent
Good
Combined load
Excellent
Poor
Fair
Unsuitable
Good
Fair
Good
Poor
Excellent
Moment load
Excellent
Poor
Unsuitable
Unsuitable
Unsuitable
Unsuitable
Fair
Poor
Good
High stiffness
Excellent
Excellent
Good
Excellent
Good
Good
Fair
Good
Good
Low friction
Good
Good
Excellent
Poor
Fair
Fair
Excellent
Good
Good
Misalignment
Poor
Poor
Poor
Unsuitable
Excellent
Excellent
Good
Poor
Poor
Locating position
(fixed)
Excellent
Good
Fair
Fair
Good
Good
Good
Excellent
Good
Non-locating
position (floating)
Good
Unsuitable
Excellent
Unsuitable
Good
Unsuitable
Good
Unsuitable
Good
Speed
Good
Good
Excellent
Poor
Fair
Fair
Excellent
Excellent
Excellent
10
Suffix K
Conrad
Suffix W
Filling Slot
Fixed mounting
Floating mounting
11
Double-Row
Fixed mounting
Floating mounting
Fig. 4. Typical mountings for double-row, angular contact ball
bearings.
Fig. 3. Typical mounting for single-row, angular contact ball
bearings.
12
Precision Bearings
(1)
(1)For additional information, refer to the Timken Super Precision Bearings for
Machine Tool Applications Catalog (order no. 5918) on www.timken.com.
13
14
TXR
Fig. 11. TXR crossed roller
bearing.
Multiple internal geometries are available to optimize either loadcarrying capacity or speed capability with part number suffixes
designated as: WI, WN, HX or K. WI-type bearings are designed to
maximize capacity of the various bearing cross sections and are
used in low to moderate speeds. The HX is Timkens proven highspeed design. It has a significant advantage at higher speeds,
generating less heat and less centrifugal loading forces. The
WN-type is generally a compromise between the WI and HX as
it offers higher speed capability than the WI, but lower capacity,
higher stiffness and lower speed capability than the HX design.
Most of the bearing types are available in either 15 degree
(2MM) or 25 degree (3MM) contact angles. In addition, Timken
now stocks more ceramic ball sizes than ever for the highest
speed requirements. The K-type deep-groove (Conrad) super
precision radial ball bearing is generally used in applications
where capacity and stiffness do not require sets containing
multiple bearings. By virtue of the single-row, radial deep-groove
construction, and super precision level tolerances, these are
capable of carrying thrust loads in either direction. Also, they
RA-RR series
extended inner ring
with locking collar
Easiest of all to install, wide inner ring ball bearings with selflocking collars are available in various sizes. These bearings,
shown with various seal and inner ring width variations, serve
many purposes in farm and industrial applications.
The GYA-RRB and the GY-KRRB series are extended inner ring and
wide inner ring type bearings with specially designed setscrews
to lock on the shaft. These bearings can be purchased so that
they can be relubricated. Positive contact land-riding R-Seals
provide protection against harmful contaminants and retain
lubricant. Extended inner ring bearings are used when space is
at a premium and overturning loads are not a problem. The wide
inner ring setscrew series is available when additional surface
contact on the shaft is a requirement for added stability.
Concentric Collar
Using the concentric collar, the bearing is locked to the shaft by
two setscrews, 120 degrees apart, tightened in the collar and
passing through drilled holes in the inner ring. These units are
suited for applications where space is limited and reversing shaft
rotation is encountered.
15
Double-Row Bearings
TS - Single-row
TSF - Single-row,
with flanged outer ring
The TSF type is a variation on the basic
single-row bearing. TSF bearings have
a flanged outer ring to facilitate axial
location and accurately aligned seats in
a through-bored housing.
TDI
TDIT
16
TNA
- Non-adjustable
TNASW - Non-adjustable with lubricant slots
TNASWE - Non-adjustable with lubricant
slots and extended back face rib
These three bearing types are similar to the TDO with a one-piece
(double) outer ring and two single inner rings. The inner ring
front faces are extended so they abut, eliminating the need for a
separate inner-ring spacer. Supplied with a built-in clearance to
give a standard setting range, these bearings provide a solution
for many fixed or floating bearing applications where optimum
simplicity of assembly is required.
Types TNASW and TNASWE are variations having chamfers
and slots on the front face of the inner ring to provide lubrication
through the shaft. Type TNASWE have extended back face ribs
on the inner rings which are ground on the O.D. to allow for the
use of a seal or stamped closure. These designs are typically
used on stationary shaft applications.
Spacer assemblies
Any two single-row bearings (type TS) can be supplied as
a double-row, pre-set, ready-to-fit assembly by the addition
of spacers, machined to pre-determined dimensions and
tolerances.
Spacer assemblies are provided in two types: "2S" and "SR". This
concept can be applied to produce custom-made double-row
bearings to suit specific applications. In addition to providing
a bearing that automatically gives a pre-determined setting at
assembly without the need for a manual setting, it is possible
to modify the assembly width to suit an application, simply by
varying the spacer widths.
SR
2S
Fig. 21. Spacer assemblies.
TNA
TNASW
TNASWE
SR - Set-RightTM assembly
Type SR are made to a standard setting range, based on Timkens
Set-Right automated setting technique suitable for most
industrial applications. They have two spacers and an optional
snap-ring that may be used for axial location. Because both types
are made up of popular sizes of single-row bearings, they provide
a low-cost option for many applications.
17
2TS-IM
18
2TS-DM
Fig. 22. Basic spacer assemblies.
2TS-TM
PACKAGED BEARINGS
PINION PACTM
UNIPACTM
UNIPAC-PLUSTM
APTM
SPTM
APTM bearing
UNIPACTM bearing
The UNIPAC-PLUS bearing is a ready-to-install, pre-set,
pre-lubricated and sealed double-row assembly with a flanged
outer ring. Originally designed for the high-volume needs of
passenger car wheels, the UNIPAC bearing now has wider
application in wheel hubs of heavy vehicles as well as in industrial
equipment.
SPTM bearing
Similar in concept to AP bearings, the SP bearing is designed
for rail journal bearing applications. The SP bearing type differs
from the AP bearing in that SP bearings are more compact in size
and are manufactured to metric boundary dimensions.
UNIPAC-PLUSTM bearing
The UNIPAC-PLUS bearing is a ready-to-install, pre-set,
sealed double-row assembly with a flanged outer ring. It also is
lubricated for the reasonable life of the bearing. It is designed
for wheel applications subjected to moderate to heavy loading.
The UNIPAC-PLUS bearing provides advantages of improved
reliability, reduced weight and easier assembly.
19
High-Speed BEARINGS
TSMA - Single-row with axial oil
TSMR - Single-row with radial oil
Some applications require extreme high-speed capability where
special lubrication methods must be provided.
The TSMA and TSMR are single-row
bearings with provisions for lubrication of
critical roller-rib contact area to ensure
adequate lubrication at high speeds.
The TSMA concept works by capturing
oil in a manifold (attached to the inner
ring), which is then directed to the
rib-roller contact through holes drilled
axially through the large inner ring rib.
The TSMR functions in a similar manner
with the difference being that holes are
drilled radially from the inner ring bore
to the large rib face. Oil is captured in
a circumferential groove in the inner
ring bore. It is directed to the rib-roller
contact area through radial holes.
20
TDIE
TDIA
TNASWH
TNASWHF
Four-row bearings
Four-row bearings combine the inherent high-load, radial/thrust
capacity and direct/indirect mounting variations of tapered roller
bearings into assemblies of maximum load rating in a minimum
space. Their main application is on the roll necks of rolling mill
equipment.
All four-row bearings are supplied as pre-set matched assemblies,
with all components numbered to ensure correct installation
sequence.
Type TQITS
Type TQITSE
The main feature of these bearings is a tapered bore the taper
being matched and continuous through the inner rings. This
permits an interference fit on the backup rolls of high-speed mills,
where a loose inner ring fit of a straight bore type TQO bearing
could result in excessive neck wear.
These four-row bearings consist of two pairs of indirectly
mounted bearings: two single and one double inner ring, four
single outer rings and three outer-ring spacers. The adjacent
faces of the inner-rings are extended so that they abut,
eliminating the need for inner-ring spacers. The indirect mounting
of the bearing pairs increase the overall effective spread of the
bearing, to give optimum stability and roll rigidity.
Type TQITSE is the same as TQITS, but has an extension to the
large bore inner ring adjacent to the roll body. This not only
provides a hardened, concentric and smooth surface for radial
lip seals, but also improves roll neck rigidity by eliminating a fillet
ring. This allows the centerline of the bearing to move closer to
the roll body. It also permits shorter and less costly rolls.
TQO/ TQOW
TQITS
TQITSE
SEALED BEARINGS
TSL
Timken offers a wide range of sealed
bearings such as the DUO-FACE PLUS seal
shown in fig 29. The TSL incorporates a DUOFACE PLUS seal, making it an economical
choice for grease-lubricated applications
at moderate speeds. See the seals section
in the back of this manual for additional seal
designs.
21
Thrust Bearings
Standard types of thrust bearings manufactured by Timken are
included in this section. Each type is designed to take thrust
loads, but four types (TVL, DTVL, TTHD and TSR) accommodate
radial loads as well. All types reflect advanced design concepts,
with large rolling elements for maximum capacity. In roller thrust
bearings, controlled-contour rollers are used to ensure uniform,
full-length contact between rollers and raceways with resultant
high capacity. Thrust bearings should operate under continuous
load for satisfactory performance.
Type TVB
Type TVL
Type DTVL
Type TP
Type TPS
Type TTHD
Type TSR
Type TTSP
Usually the inner ring is the rotating member and is shaft mounted.
The outer ring is normally stationary and should be mounted with
O.D. clearance to allow the bearing to assume its proper operating
position. If combined loads exist, the outer ring must be radially
located in the housing.
Thrust ball bearings are used for lighter loads and higher speeds
than thrust roller bearings. Types TVB, TVL and DTVL are shown
in fig. 30.
Type TVB thrust ball bearing is separable and consists of two
hardened and ground steel rings with grooved raceways, and
a cage that separates and retains precision-ground and lapped
balls. The standard cage material is brass, but this may be varied
according to the requirements of the application. Timken standard
tolerances for type TVB bearings are equivalent to ABEC 1 where
applicable, but higher grades of precision are available.
Type TVB bearings provide axial rigidity in one direction and their
use to support radial loads is not suggested. Usually the rotating
TVB
Fig. 30. Thrust ball bearing types.
22
TVL
DTVL
Type TSR
TP
TPS
Fig. 31. Thrust cylindrical roller bearings.
Type TPS bearings are the same as type TP bearings except one
ring is spherically ground to seat against an aligning ring, thus
making the bearing adaptable to initial misalignment. Its use
is not suggested for operating conditions where alignment is
continuously changing (dynamic misalignment).
23
Type TTHDFL
Type TTHDSX
TTC
TTSP
Type TTVS
Type TTHDSV
TTHDFL
TTVS
TTHDFL
Most sizes utilize cages with hardened pins through the center
of the rollers, allowing closer spacing of the rollers to maximize
capacity. Smaller sizes have cast-brass cages, carefully
machined to permit full flow of lubricant.
Self-aligning V-flat bearings (TTVS) employ the same basic roller
and raceway design, except the lower ring is in two pieces, with
the contacting faces spherically ground permitting self-alignment
under conditions of initial misalignment. TTVS bearings should
not be used if dynamic misalignment (changing under load) is
expected.
24
TTHDSV
Fig. 34. Thrust tapered roller bearings.
TTHDSX
EJ
EM/YM and
EMB/YMB
YMD
YP
C4 clearance range.
A taper of 1:12 is standard except for 240, 241 and 242 series,
which have a taper of 1:30.
SERIES
239
SERIES
SERIES
SERIES
SERIES
239
239 239
239230
230
230 230
230 240
240
240 240
240
231
231
231 231
231
241
241
241 241
241
222
222
222 222
222
232 232
232
232
232
213 213
213
213
213
223
223
223 223
223
233
233
233 233
233
25
NU, RIU, RU
N, RIN, RN
26
NJ, RIJ, RJ
NF, RIF, RF
NUP, RIT, RT
NP, RIP, RP
EMA Series
Full-Complement (NCF)
The full-complement (NCF) single-row bearings include integral
flanges on the inner and outer rings. These bearings also can
manage axial loads in one direction and permit small axial
displacements.
A-52xx-WS
A-52xx-WM
52xx-WS
A-52xx
27
CAGES
Cages (also referred to as rolling element retainers) serve several
purposes in the proper operation of a rolling element bearing.
Cages separate the rolling elements and prevent rolling element
on rolling element contact and wear. Cages align the rolling
elements on the inner ring to prevent rolling element sliding,
skidding, and skewing to facilitate true rolling motion. For handling
purposes, cages retain the rolling elements on the inner ring
assembly to allow for bearing installation. In some instances,
cages also improve flow of the lubricant to the bearing raceway
or rib contacting surfaces.
The following sections discuss the common types of cages
used for each major bearing design type (tapered, cylindrical,
spherical, and ball bearing). The basic design geometry, material,
and manufacture are discussed for each cage type.
Polymer Cages
Cages for tapered roller bearings made of polymer material are
used primarily for pre-greased and sealed package designs. The
most common polymer materials used are Nylon thermoplastics
with glass reinforcement. Polymer cages can be mass produced
in large quantities and offer more design flexibility than stampedsteel types. Polymer cages are lightweight and easy to assemble.
In some instances, increased bearing rating can be achieved
by allowing one or two extra rollers in the bearing complement.
Care should be exercised when using aggressive lubricants with
EP (extreme-pressure) additives in combination with elevated
temperatures greater than 107 C (225 F).
Machined Cages
Machined cages for tapered roller bearings are robust in design
and are suited for high-speed and high-load applications.
Machined cages use alloy steels and are produced through
milling and broaching operations. Assembly does not require
a close-in operation and rollers can be retained using nibs or
staking. Oil holes also can be easily added for extra lubrication
for demanding applications. Some designs are silver plated for
special applications.
Pin-Type Cages
28
Machined-Brass Cage
EM, EMB, YM, YMB and YMD bearing cages are precisionmachined from brass as shown in figs. 44-46. Their rugged
construction provides an advantage in more severe applications.
The open-end, finger-type design permits lubricant to reach all
surfaces easily, ensuring ample lubrication and a cooler running
bearing.
EM/YM
EM
EM
YMD
YMB
YMB
YMD
YMD
EJ
EJ
EM
EJ
EM
EJ
Fig. 41. EJ cage.
Pin-Type Cages
Large diameter spherical roller bearings can be supplied with
these cages. Pin-type cages, one for each row of rollers, consist
of two rings and a series of pins running through the center of
the rolling element. The design of pin-type cages permits an
increased roller complement, giving the bearing enhanced loadcarrying ability. Consult your Timken engineer for suggestions on
the application of this cage.
YMB
YMD
EMB/YMB
YMD
YMB
EM, EMB, YM and YMB are all one-piece designs that are
YMD within the bearing. With
YMB
differentiated
by their means of guidance
EM and YM designs, the cage mass is low and the rollers are used
for guidance, while EMB and YMB cage designs typically have
more mass and guide on the inner ring.
YP
29
YP
YP
Pin-Type Cages
Machined Cages
Machined cages are an option for smaller cylindrical bearing
sizes, and are typically made from brass. Machined cage designs
for cylindrical roller bearings offer increased strength for more
demanding applications.
Designs can be one-piece or two-piece cages. One-piece designs
can be either a finger-type as shown in fig. 49 or a standard cage
configuration having fully milled pockets. The one-piece fingertype and the two-piece design with cage ring (fig. 50) are more
common in standard cylindrical roller bearings. They also are
roller-guided designs.
The one-piece version with fully milled roller pockets (fig. 51)
is our premium cage. This cage is used with our EMA series
bearings. Unlike traditional roller-riding cages, it is a land-riding
cage which minimizes drag on the roller elements. This reduces
heat generation, resulting in improved bearing life. Compared to
a two-piece design, this one-piece cage also reduces heat and
wear by enhancing lubrication flow.
30
Cages of this type are a one-piece design and are usually ring
piloted. The cage is light weight, has oil-absorbing capability, and
is suitable for high-speed applications. Cages of this type can be
precisely machined, which reduces inertial ball and cage impact
forces at high speeds. It does not provide for retention of the balls
for handling purposes.
Care also needs to be exercised when using aggressive lubrications with extreme-pressure (EP) additives in combination with
elevated temperatures greater than 107 C (225 F).
Care also needs to be exercised when using aggressive lubrications with extreme-pressure (EP) additives in combination with
elevated temperatures greater than 107 C (225 F).
31
Description
mm, in.
unitless
unitless
a3
unitless
unitless
unitless
unitless
Symbol
Description
mm, in.
mm, in.
mm, in.
DpG
mm, in.
DpP
mm, in.
DpW
mm, in.
e Life Exponent
unitless
unitless
unitless
mm, in.
E Free Endplay
mm, in.
A, B,
unitless
mm, in.
unitless
mm, in.
unitless
mm, in.
fb
mm, in.
fn
Speed Factor
Tooth Length
Ca90
N, lbf
unitless
unitless
unitless
N, lbf
N, lbf
Co
N, lbf
Coa
N, lbf
C90
C90(2)
Ca
unitless
unitless
unitless
Cs
unitless
unitless
unitless
Cp
Ct
mm, in.
Ball Diameter
mm, in.
d1
Spherical Diameter
mm, in.
da
mm, in.
mm, in.
mm, in.
mm, in.
dsi
mm, in.
mm, in.
D0
mm, in.
FaG
N, lbf
FaP
N, lbf
FaW
N, lbf
N, lbf
N, lbf
Fc Centrifugal Force
N, lbf
N, lbf
Frh
N, lbf
Frs
N, lbf
N, lbf
Fs
N, lbf
FsG
N, lbf
FsP
N, lbf
FsW
N, lbf
Ft Tangential Force
N, lbf
Fte
N, lbf
FtG
N, lbf
FtP
N, lbf
FtW
N, lbf
FW Force of Unbalance
N, lbf
mm, in.
unitless
unitless
mm, in.
unitless
Dm
mm, in.
Power
32
kW, hp
mm, in.
Symbol
Description
HFs
unitless
unitless
lbf/RPM2
unitless
unitless
K1, K2
unitless
decimal fraction
Kia
mm, in.
Kn
unitless
unitless
mm, in.
mm, in.
revolutions or hours
Lf Life Factor
unitless
m Gearing Ratio
unitless
rot/min, RPM
n a
rot/min, RPM
Reference Speed
rot/min, RPM
nP
rot/min, RPM
rot/min, RPM
unitless
unitless
unitless
unitless
unitless
Nf
Speed Factor
unitless
unitless
Po
N, lbf
Poa
N, lbf
Por
N, lbf
N, lbf
N, lbf
N, lbf
Shaft Diameter
mm, in.
unitless
Sd
mm, in.
SD
mm, in.
Sea
mm, in.
Sia
mm, in.
mm, in.
mm, in.
unitless
N, lbf
Te
N, lbf
mm, in.
decimal fraction
unitless
Ko
Bearing Life
Description
Kea
L10
Symbol
RIC
unitless
km/h, mph
VBS
mm, in.
VCS
mm, in.
m/s, fpm
unitless
unitless
X0
unitless
unitless
Y0
unitless
unitless
mm/mm/C, in./in./F
ao
deg.
deg.
C, F
Bs
mm, in.
Cs
mm, in.
dmp
mm, in.
Dmp
mm, in.
mm, in.
q1, q2, q3 Gear Mesh Angles Relative to the Reference Plane deg., rad
qi, qo
C, F
deg.
unitless
cP
cSt
deg.
r Lubricant Density
deg.
deg.
deg.
kg/m3, lb./ft3
deg.
deg.
deg.
deg.
unitless
33
GEARING
The following equations are used to determine the forces
developed by machine elements commonly encountered in
bearing applications.
Spur gearing
Tangential force
(1.91 x 107) H (metric system)
FtG =
DpG nG
Separating force
FsG = FtG tan G
Pinion
Tangential force
(1.91 x 107) H (metric system)
FtP =
DmP np
(1.26 x 105) H (inch system)
=
DmP np
Thrust force
FaG = FtG tan G
Thrust force
FaP = FtP tan P sin P
Fig. 58. Helical gearing.
Separating force
FtG tan G
FsG =
cos G
34
Separating force
FsP = FtP tan P cos P
(metric system)
Thrust force
Separating force
FsG = FtG tan G cos G
FtP = FtG
In hypoid gearing:
FtG cos P
FtP =
cos G
Hypoid pinion effective working diameter:
DmP = DmG
( )( )
Np
NG
cos G
cos P
Tangential force
(1.91 x 107) H
FtG =
DmG nG
(metric system)
35
Thrust Force
Driving member
FaP = FtP (tan P sin P sin P cos P)
cos P
Driving member
FsP = FtP (tan P cos P + sin P sin P)
cos P
Driven member
F
tG
FaG =
(tan G sin G + sin G cos G)
cos G
Driven member
F
(tan cos sin sin )
tG
FsG =
G
G
G
G
cos G
Driving member
Right-hand spiral
counterclockwise
or
Left-hand spiral
clockwise
Separating Force
Driven member
Driving member
Driven member
36
Worm Gear
Tangential force
Worm
(1.91 x 107) H
(metric system)
FtG =
DpG nG
(1.26 x 105) H
(inch system)
=
DpG nG
FtW
FtG =
tan
Thrust force
FaW = 0.98 FtG
Thrust force
(1.91 x 107) H
FaG =
DpW nW
(metric system)
(1.26 x 105) H
=
DpW nW
(inch system)
(
(
)
)
DpG
= tan-1
m DpW
or
LH
= tan-1
DpW
and
(inch system)
Separating force
0.98 FtG tan
FsW =
cos
Tangential force
FtW sin
FsG =
cos sin + cos
(metric system)
Worm Gear
Separating force
(1.91 x 107) H
FtW =
DmW nW
(1.26 x 105) H
=
DmW nW
or
Where:
Tangential force
(1.91 x 107) H m
or
cos tan
=
cos + cot
Thrust force
Metric system
(1.91 x 107) H
FaG =
DmW nW
0.146
(1) = (5.34 x 10 -7) Vr3 +
- 0.103
Vr0.09
DpW nW
Vr =
(1.91 x 104) cos
Separating force
Inch system
0.235
(1) = (7 x 10 -14) Vr3 +
- 0.103
Vr0.09
DpW nW
Vr =
3.82 cos
(1) Approximate coefficient of friction for the 0.015 to 15 m/s (3 to 3000 ft/min)
(metric system)
Where:
DpG
LH
= tan-1
= tan-1
m DpW
DpW
37
Shock Loads
(1.91 x 107) H
Fb =
Dm n
5
= (1.26 x 10 ) H
Dm n
B (inch system)
(metric system)
P
Dm =
180
sin
Ns
( )
Where:
P = chain pitch
Centrifugal Force
k side
ion, slac
Dm
F2 = Tens
Fb
F1 = Tens
Fw r n2
=
3.52 x 104
ion, tigh
t side
(metric system)
(inch system)
1.00
1.25
V belts.............................................
1.50
Fte V
3600
Fte V
= 336V
Dm
375
and
38
5300V
Dm
Bearing REACTIONS
For a shaft on two supports, bearing radial loads are determined
by:
the bearing supports, and solving for the radial and axial
reactions at each support.
Effective Spread
Tapered Roller or Angular Contact
Ball Bearings
When a load is applied to a tapered roller or angular contact
ball bearing, the internal forces at each rolling element-to-outer
raceway contact act normal to the raceway. These forces
have radial and axial components. With the exception of the
special case of pure axial loads, the inner ring and the shaft
will experience moments imposed by the asymmetrical axial
components of the forces on the rolling elements. The effective
center for tapered roller bearings is defined as the point at which
the lines of force normal to the outer ring raceway intersect the
bearing axis. As an approximation, it also applies to angular
contact ball bearings. The effective spread is then defined as the
distance between the bearing effective centers for a two-bearing
system. It can be demonstrated mathematically that, if the shaft is
modeled as being supported at its effective bearing center rather
than at its geometric bearing center, the bearing moment may be
ignored when calculating radial loads on the bearing.
Only externally applied loads need to be considered, and moments
are taken about the effective centers of the bearings to determine
loads or reactions.
Effective bearing
Effective bearing
spread
spread
Effective bearing
Effective bearing
spread
spread
Effective bearing
Effective bearing
spread
spread
Effective bearing
Effective bearing
spread
spread
Float position
Fixed position
Effective bearing
Effective bearing
spread
spread
Effective bearing
Effective bearing
spread
spread
Effective bearing
Effective bearing
spread
spread
Effective bearing
Effective bearing
spread
spread
39
Force Resolution
Shafts on Two Supports
Simple beam equations are used to translate the externally
applied forces on a shaft into bearing reactions acting at the
bearing effective centers.
The following equations are for the case of a shaft on two
supports with gear forces Ft (tangential), Fs (separating), and Fa
(thrust), an external radial load F, and an external moment Mo.
The loads are applied at arbitrary angles (1, 2, and 3) relative
to the reference plane indicated in fig. 67. Using the principle of
superposition, the equations for vertical and horizontal reactions
(Frv and Frh) can be expanded to include any number of gears,
external forces or moments. For the bearing reaction calculations,
the gear forces should include the sign (+/-) generated from the
respective gear force equation.
FsG
FsG
FtG
FaG
2
1
3
e
lan
of
nt
me
Mo
FaG
FtG
Plane of
Reference
Bearing A
Mo Bearing B
FrAh
FrBh
FrBv
FrAv
c1
c2
ae
40
Pr = XFr + YFa
KT = Fa
KT = Fa
Bearing
Description (ref.)
In equation form,
Pr = Fr + YFa
for Fa / Fr e, and
Pr = 0.67Fr + YFa for Fa / Fr > e.
M9300K,MM9300K
M9100K,MM9100K
M200K,MM200K
M300K,MM300K
Pr = Fr
Pr = Fr + 1.20Y1Fa
or
or
Pr = 0.56Fr + Y1Fa Pr = 0.78Fr + 1.625Y1Fa
Pr = Fr
or
Pr = 0.56Fr + Y1Fa
Pr = Fr
or
Pr = 0.56Fr + Y1Fa
Values for e and Y are available in the Spherical Roller Bearing Catalog available on
www.timken.com.
If, in addition to the radial load, an axial load Fa acts on the bearing,
this axial load is taken into consideration when calculating the life
of a bearing (with Fa < Faz; Faz is the allowable axial load).
Table 4. cylindrical roller bearing
dynamic equivalent radial values
Dimension Series
10.. 2..E, 3..E
22..E, 23..E
Load Ratio
Dynamic
Equivalent Load
P = Fr
P = 0.93 Fr + 0.69 Fa
P = Fr
P = 0.93 Fr + 0.45 Fa
Contact
Angle
Single-Row
and Tandem
Mountings
Bearing Type
and or Series
iBCo
Co
20
Pr = Fr
or
Pr = 0.43Fr + Fa
Pr = Fr + 1.09Fa
or
Pr = 0.70Fr + 1.63Fa
5200, 5200W
(see 20 exceptions)
5300, 5300W
(see 20 exceptions)
5400, 5400W
(see 20 exceptions)
30
Pr = Fr
or
Pr = 0.39Fr +0.76Fa
Pr = Fr + 0.78Fa
or
Pr = 0.63Fr + 1.24Fa
7200WN
7300WN
7400WN
40
Pr = Fr
or
Pr = 0.35Fr +0.57Fa
Pr = Fr + 0.55Fa
or
Pr = 0.57Fr + 0.93Fa
2M9300WI
2M9100WI, 2MM9100WI
2M200WI, 2MM200WI
2MM300WI
15
Pr = Fr
Pr = Fr + 1.124Y3Fa
or
or
Pr = 0.44Fr + Y3Fa Pr = 0.72Fr + 1.625Y3Fa
2MM9100WO
3M9300WI
3M9100WI, 3MM9100WI
3M200WI, 3MM200WI
3MM300WI
Pr = Fr
Pr = Fr + 1.124Y2Fa
or
or
Pr = 0.44Fr +Y2Fa Pr = 0.72Fr + 1.625Y2Fa
25
Pr = Fr
or
Pr = 0.41Fr +0.87Fa
Pr = Fr + 0.92Fa
or
Pr = 0.67Fr + 1.41Fa
(1)If Pr > Co or Pr > 1/2 CE consult with your Timken engineer on life calculations.
41
Y1
Y2
Y3
0.015
2.30
1.47
1.60
0.020
2.22
1.44
1.59
0.025
2.10
1.41
1.57
0.030
2.00
1.39
1.56
0.040
1.86
1.35
1.55
0.050
1.76
1.32
1.53
0.060
1.68
1.29
1.51
0.080
1.57
1.25
1.49
0.100
1.48
1.21
1.47
0.120
1.42
1.19
1.45
0.150
1.34
1.14
1.42
0.200
1.25
1.09
1.39
0.250
1.18
1.05
1.35
0.300
1.13
1.02
1.33
0.400
1.05
1.00
1.29
0.500
1.00
1.00
1.25
0.600
1.22
0.800
1.17
1.000
1.13
1.200
1.10
0.47 Fr
K
42
Single-row mounting
To use this table for a single-row mounting, determine if bearings
are direct or indirect mounted and to which bearing, A or B, thrust
Fae is applied. Once the appropriate design is established, follow
across the page opposite that design, and check to determine
which thrust load and dynamic equivalent radial load equations
apply.
Table 7. Dynamic equivalent radial load equations, single-row tapered roller bearing mounting
Design
Bearing A
Bearing A
Thrust Condition
Bearing B
Bearing B
0.47 FrA
KA
Fae
Fae
FrA
FrA
0.47 FrB
KB
+ Fae
FaA =
0.47 FrB
KB
+ Fae
FrB
FrB
Bearing B
Bearing B
Bearing A
Bearing A
0.47 FrA
KA
Fae
Fae
FrA
FrA
Bearing A
Bearing A
Bearing B
Bearing B
F ae
F ae
Bearing A
Bearing A
0.47 FrB
FaB =
0.47 FrA
KA
+ Fae
Bearing B
Bearing B
0.47 FrB
F rB
F rB
>
0.47 FrA
FaA =
FaB =
KA
+ Fae
0.47 FrA
PA = FrA
KA
0.47 FrA
- Fae
KA
Axial Load
F rB
F rB
KB
F ae
F ae
KB
+ Fae
FaA =
Thrust Condition
KB
F rA
F rA
>
0.47 FrB
FrB
FrB
Design
F rA
F rA
Dynamic Equivalent
Radial Load
Axial Load
FaA =
FaB =
0.47 FrA
KA
0.47 FrB
KB
0.47 FrB
KB
Dynamic Equivalent
Radial Load
PA = FrA
KA
0.47 FrA
+ Fae
- Fae
43
Table 8. Dynamic equivalent radial load equations, double-row tapered roller bearing mounting
Design Similar Bearing Series
FrAB
FrAB
FrC
FrC
Bearing B
Bearing B
Bearing A
Bearing A
Bearing C
Bearing C
Fae
Fae
Fixed Bearing
Fixed Bearing
Bearing C
Bearing C
Fae
Fae
Fixed Bearing
Fixed Bearing
FrAB
FrAB
FrAB
FrAB Bearing B
Bearing B
Bearing B
Bearing B
Fixed Bearing
Fixed Bearing
Fixed Bearing
Fixed Bearing
Bearing A
Bearing A
Fae
Fae
Fae
Fae
Fae >
Bearing B
FrC
FrC
FrC
FrC Bearing C
Bearing C
Bearing C
Bearing C
Fixed Bearing
Dynamic Equivalent
Radial Load
Fae
0.6 FrAB
KA
PA =
PB =
Floating Bearing
Floating Bearing
KA
KA + KB
KB
KA + KB
Floating Bearing
Floating Bearing
Bearing C
Bearing
BearingCC
Bearing C
Fae
FaeFae
Fae Floating Bearing
FloatingBearing
Bearing
Floating
Floating Bearing
Fixed Bearing
Fixed
Bearing
Fixed
Bearing
PB = 0
Thrust Condition
FrC
FFrCrC
FrC
Bearing A
Bearing
BB
Bearing
Bearing A
Bearing B
0.6 FrAB
Floating Bearing
Floating Bearing
FrAB
FrAB
FrAB
FrAB
0.6 FrAB
FrC
FrC
Bearing B
Bearing B
Bearing A
Bearing A
Bearing A
Bearing A
Fae
Floating Bearing
Floating Bearing
FrAB
FrAB
Bearing A
Bearing A
Dynamic Equivalent
Radial Load
Thrust Condition
Fae >
0.6 FrAB
KA
NOTE: FrAB is the radial load on the double-row assembly. The single-row basic dynamic radial load rating, C90, is to be applied when calculating life based on the above equations.
FrAB
FrAB
Bearing A
Bearing A
44
FrC
FrC
Bearing B
Bearing B
Fixed Bearing
Fixed Bearing
Fae
Fae
Bearing C
Bearing C
Floating Bearing
Floating Bearing
o = 580
()
()
Po
o = 4000
Co
Po
1/2
Co
MPa
()
()
0 = 4200
ksi
0 = 607
1/3
Po
MPa
Co
Po
1/3
Co
ksi
Similar to radial ball bearings, thrust ball bearings use the same
equation for equivalent static and dynamic loading.
Pa = 1.2Fr + Fa
Poa = Xo Fr + Yo Fa
Contact
Angle
(a)
Radial Ball
Angular Contact Ball
Spherical Roller
Single-Row
Xo
Double-Row
Yo
Xo
Yo
0.6
0.5
0.6
0.5
15
0.5
0.47
0.94
20
0.5
0.42
0.84
25
0.5
0.38
0.76
30
0.5
0.33
0.66
35
0.5
0.29
0.58
40
0.5
0.26
0.5
0.22 cota
0.44 cota
45
The bearing data tables do not include static ratings for doublerow bearings. The double-row static radial rating can be
estimated as:
Co(2) = 2Co
Table 10. Static equivalent load equations, single-row tapered roller bearing
Design
Bearing A
Thrust Condition
Bearing B
0.47 FrA
KA
0.47 FrB
KB
FaA =
+ Fae
FaB =
Fae
FrA
FrB
Bearing A
Bearing B
0.47 FrA
FrA
Fae
KA
>
0.47 FrB
KB
Static Equivalent
Radial Load
Axial Load
FaA =
+ Fae
FrB
FaB =
0.47 FrB
KB
POB = FrB
+ Fae
0.47 FrB
KB
0.47 FrA
KA
0.47 FrA
KA
- Fae
46
C0a
1000
(lbf)
Bearing Ratings
There are two fundamental load ratings for bearings, a dynamic load rating and a static load rating.
The dynamic load rating is used to estimate the life of a rotating bearing. Static load ratings are
used to determine the maximum permissible load that can be applied to a non-rotating bearing.
The basic static radial load rating and thrust load rating for
Timken bearings are based on a maximum contact stress within
a non-rotating bearing of 4000 MPa (580 ksi) for roller bearings
and 4200 MPa (609 ksi) for ball bearings, at the center of contact
on the most heavily loaded rolling element.
The 4000 MPa (580 ksi) or 4200 MPa (609 ksi) stress levels may
cause visible light Brinell marks on the bearing raceways. This
degree of marking will not have a measurable effect on fatigue
life when the bearing is subsequently rotating under a lower
application load. If sound, vibration or torque are critical, or if a
pronounced shock load is present, a lower load limit should be
applied. For more information on selecting a bearing for static
load conditions, consult your Timken engineer.
47
Bearing Life
Many different performance criteria exist that dictate how a
bearing should be selected. These include bearing fatigue life,
rotational precision, power requirements, temperature limits,
speed capabilities, sound, etc. This section deals primarily with
bearing life as related to material-associated fatigue. Bearing
life is defined as the length of time, or number of revolutions,
until a fatigue spall of 6 mm2 (0.01 in.2) develops. Since fatigue
is a statistical phenomenon, the life of an individual bearing
is impossible to predetermine precisely. Bearings that may
appear to be identical can exhibit considerable life scatter when
tested under identical conditions. Thus it is necessary to base
life predictions on a statistical evaluation of a large number
of bearings operating under similar conditions. The Weibull
distribution function is the accepted standard for predicting the
life of a population of bearings at any given reliability level.
Rating Life
Rating life, (L10), is the life that 90 percent of a group of apparently
identical bearings will complete or exceed before a fatigue spall
develops. The L10 life also is associated with 90 percent reliability
for a single bearing under a certain load.
()
C
Pr
(1x106)
revolutions
L10 =
()
L10 =
() ( )
L10 =
( )
L10 =
( )
or
and
or
C90
10/3
Pr
C90
(90x106)
10/3
Pr
Ca90
90x106
hours
60n
10/3
Pa
Ca90
revolutions
10/3
Pa
(90x106)
90x106
60n
revolutions
hours
L10 =
()( )
C
Pr
1x106
60n
hours
()
L10 =
( )( )
or
Ca
Pa
Ca
Pa
(1x10 6 )
1x106
60n
revolutions
hours
48
Lna = a1a2a3L10
The Timken expanded bearing life equation is:
( )
C
Lna = a1a2a3da3ka3la3ma3p
Pr
(1x106) revolutions
Where:
e = 3 for ball bearings
= 10/3 for tapered, cylindrical and spherical
roller bearings
( )
a1 = 4.26 ln
100
R
2/3
+ 0.05
Ln
a1
90
L10
1.00
95
L5
0.64
96
L4
0.55
97
L3
0.47
98
L2
0.37
99
L1
0.25
99.5
L0.5
0.175
99.9
L0.1
0.093
that contact stresses are approximately less than 2400 MPa (350
ksi), and adequate lubrication is provided. It is important to note
that improvements in material cannot offset poor lubrication in
an operating bearing system. Consult your Timken engineer for
applicability of the material factor.
49
The arc defined by the rollers supporting the load is called the
bearing load zone. The load zone is significantly influenced
by bearing setting or internal clearance, either radial or axial
depending on the bearing type. Neglecting preload, less clearance
in a bearing results in a larger load zone and subsequently longer
bearing life.
The dynamic equivalent load (Pr) is used instead of the applied
load (Fr) to approximate the combined load zone effect on L10a.
If a more accurate assessment of the load zone adjusted life is
necessary (e.g., including the effects of internal clearance or
fitting practice), consult your Timken engineer.
Cg is given for most part numbers that are available in the bearing
catalogs on www.timken.com. The geometry factor also includes
the material effects and load zone considerations for non-tapered
roller bearings, as these also are inherent to the bearing design.
However, it should be noted that the primary effect of the load
zone is on roller load distributions and contact stresses within
the bearing, which are not quantified within the lubrication factor.
Refer to the previous section Load Zone Life Factor (a3k) for more
information.
The geometry factor (Cg) is not applicable to our DuraSpexx
product. For more information on our DuraSpexx product, consult
your Timken engineer.
50
1.0
Ball Bearings
Roller Bearings
0.9
0.8
0.7
Cl
0.6
0.5
0.4
0.3
0.2
0.1
0.0
10
100
1000
10000
Pr (Newtons)
100000
1000000
10000000
Fig. 70. Load factor (Cl) vs. dynamic equivalent bearing load (Pr).
1
0.9
For all non-tapered roller bearings, the load zone factor is one
(1). For tapered roller bearings, the load zone factor can be taken
from fig. 71.
0.8
0.747
Cj
0.7
0.6
0.5
0 0.5 1 1.5 2
Fr
Fa K
2.5
Fig. 71. Load zone factor (Cj) for tapered roller bearings.
TIMKEN ENGINEERING MANUAL
51
1000
Ball Bearings
Roller Bearings
100
10
Fig. 72. Speed factor (Cs) vs.
rotational speed.
10
100
1000
Rotational Speed (RPM)
10000
10000
1000
100
ISO VG
680
460
320
220
150
100
68
46
32
10
1000
Ball Bearings
Roller Bearings
Cv
100
10
Fig. 74. Viscosity factor (Cv) vs.
kinematic viscosity.
52
10
100
1000
Kinematic Viscosity (cSt)
10000
C/Pr =13.48
C/Pr =9.63
C/Pr =7.7
C/Pr =6.74
C/Pr =5.78
C/Pr =5.12
4.5
4
C/Pr =4.81
3.5
3
2.5
C/Pr =4.24
2
1.5
C/Pr =3.85
C/Pr =3.5
C/Pr =3.08
0.5
53
Degrees
<20
1.2
0.07
20-35
0.5
0.03
>35
100
0
A. Raceway length
No special profile
700
600
Stress (ksi)
500
400
300
200
100
0
B. Raceway length
Special profile
54
300
200
400
238
0.5
0.75
223, 240
232, 241
1.25
55
Specification
56
Timken
AA
ISO/DIN
P0
P6
P5
P4
P2
ABMA
Inch
Bearing Type
RBEC 1
RBEC 3
RBEC 5
RBEC 7
RBEC 9
Ball Bearings
ABEC 1
ABEC 3
ABEC 5
ABEC 7
ABEC 9
Timken
00
000
ABMA
00
METRIC SYSTEM
Radial ball, spherical and cylindrical roller bearings
Standard Timken radial ball, radial spherical roller and radial
cylindrical roller bearings maintain normal tolerances according
to the current ISO 492 standard. Tables 15 and 16 list the critical
tolerances for these bearing types. For applications where running
tolerance is critical, P6 or P5 tolerances are recommended.
Table 15. Radial ball, spherical and cylindrical roller bearing tolerances inner ring (Metric)
Bore Deviation(1)
dmp
Bearing Bore
Width Variation
VBs
Face
Runout
with Bore
Sd
Radial Runout
Kia
Axial
Runout
Sia
Width Deviation
Inner & Outer Rings(1)
Bs and Cs
Over
Incl.
P0
P6
P5
P0
P6
P5
P0
P6
P5
P5
P5
P0, P6
P5
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
2.5000
0.0984
10.000
0.3937
-0.008
-0.0003
-0.007
-0.0003
-0.005
-0.0002
0.015
0.0006
0.015
0.0006
0.005
0.0002
0.010
0.0004
0.006
0.0002
0.004
0.0002
0.007
0.0003
0.007
0.0003
-0.120
-0.0047
-0.040
-0.0157
10.000
0.3937
18.000
0.7087
-0.008
-0.0003
-0.007
-0.0003
-0.005
-0.0002
0.020
0.0008
0.020
0.0008
0.005
0.0002
0.010
0.0004
0.007
0.0003
0.004
0.0002
0.007
0.0003
0.007
0.0003
-0.120
-0.0047
-0.080
-0.0031
18.000
0.7087
30.000
1.1811
-0.010
-0.0004
-0.008
-0.0003
-0.006
-0.0002
0.020
0.0008
0.020
0.0008
0.005
0.0002
0.013
0.0005
0.008
0.0003
0.004
0.0002
0.008
0.0003
0.008
0.0003
-0.120
-0.0047
-0.120
-0.0047
30.000
1.1811
50.000
1.9685
-0.012
-0.0005
-0.010
-0.0004
-0.008
-0.0003
0.020
0.0008
0.020
0.0008
0.005
0.0002
0.015
0.0006
0.010
0.0004
0.005
0.0002
0.008
0.0003
0.008
0.0003
-0.120
-0.0047
-0.120
-0.0047
50.000
1.9685
80.000
3.1496
-0.015
-0.0006
-0.012
-0.0005
-0.009
-0.0004
0.025
0.0010
0.025
0.0010
0.006
0.0002
0.020
0.0008
0.010
0.0004
0.005
0.0002
0.008
0.0003
0.008
0.0003
-0.150
-0.0059
-0.150
-0.0059
80.000
3.1496
120.000
4.7244
-0.020
-0.0008
-0.015
-0.0006
-0.010
-0.0004
0.025
0.0010
0.025
0.0010
0.007
0.0003
0.025
0.0010
0.013
0.0005
0.006
0.0002
0.009
0.0004
0.009
0.0004
-0.200
-0.0079
-0.200
-0.0079
120.000
4.7244
150.000
5.9055
-0.025
-0.0010
-0.018
-0.0007
-0.013
-0.0005
0.030
0.0012
0.030
0.0012
0.008
0.0003
0.030
0.0012
0.018
0.0007
0.008
0.0003
0.010
0.0004
0.010
0.0004
-0.250
-0.0098
-0.250
-0.0098
150.000
5.9055
180.000
7.0866
-0.025
-0.0010
-0.018
-0.0007
-0.013
-0.0005
0.030
0.0012
0.030
0.0012
0.008
0.0003
0.030
0.0012
0.018
0.0007
0.008
0.0003
0.010
0.0004
0.010
0.0004
-0.250
-0.0098
-0.250
-0.0098
180.000
7.0866
250.000
9.8425
-0.030
-0.0012
-0.022
-0.0009
-0.015
-0.0006
0.030
0.0012
0.030
0.0012
0.010
0.0004
0.040
0.0016
0.020
0.0008
0.010
0.0004
0.011
0.0004
0.013
0.0005
-0.300
-0.0018
-0.300
-0.0018
250.000
9.8425
315.000
12.4016
-0.035
-0.0014
-0.025
-0.0010
-0.018
-0.0007
0.035
0.0014
0.035
0.0014
0.013
0.0005
0.050
0.0020
0.025
0.0010
0.013
0.0005
0.013
0.0005
0.015
0.0006
-0.350
-0.0138
-0.350
-0.0138
315.000
12.4016
400.000
15.7480
-0.040
-0.0016
-0.030
-0.0012
-0.023
-0.0009
0.040
0.0016
0.040
0.0016
0.015
0.0006
0.060
0.0024
0.030
0.0012
0.015
0.0006
0.015
0.0006
0.020
0.0008
-0.400
-0.0157
-0.400
-0.0157
400.000
15.7480
500.000
19.6850
-0.045
-0.0018
-0.035
-0.0014
0.050
0.0020
0.045
0.0018
0.065
0.0026
0.035
0.0014
-0.450
-0.0177
500.000
19.6850
630.000
24.8031
-0.050
-0.0020
-0.040
-0.0016
0.060
0.0024
0.050
0.0020
0.070
0.0028
0.040
0.0016
-0.500
-0.0197
630.000
24.8031
800.000
31.4961
-0.075
-0.0030
0.070
0.0028
0.080
0.0031
-0.750
-0.0295
(1)Tolerance
57
Table 16. Radial ball, spherical and cylindrical roller bearing tolerances outer ring (Metric)
Outside Deviation(1)
Dmp
Bearing O.D.
Width Variation
Vcs
Radial Runout
Kea
Axial
Runout
Sea
Outside
Diameter
Runout
With Face
SD
Over
Incl.
P0
P6
P5
P0
P6
P0
P6
P5
P5
P5
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
18.000
0.7087
-0.008
-0.0003
-0.007
-0.0003
-0.005
-0.0002
0.015
0.0006
0.005
0.0002
0.015
0.0006
0.008
0.0003
0.005
0.0002
0.008
0.0003
0.008
0.0003
18.000
0.7087
30.000
1.1811
-0.009
-0.0004
-0.008
-0.0003
-0.006
-0.00024
0.020
0.0008
0.005
0.0002
0.015
0.0006
0.009
0.0004
0.006
0.00024
0.008
0.0003
0.008
0.0003
30.000
1.1811
50.000
1.9685
-0.011
-0.0004
-0.009
-0.0004
-0.007
-0.0003
0.020
0.0008
0.005
0.0002
0.020
0.0008
0.010
0.0004
0.007
0.0003
0.008
0.0003
0.008
0.0003
50.000
1.9685
80.000
3.1496
-0.013
-0.0005
-0.011
-0.0004
-0.009
-0.0004
0.025
0.0010
0.006
0.00024
0.025
0.0010
0.013
0.0005
0.008
0.0003
0.010
0.0004
0.008
0.0003
80.000
3.1496
120.000
4.7244
-0.015
-0.0006
-0.013
-0.0005
-0.010
-0.0004
0.025
0.0010
0.008
0.0003
0.035
0.0014
0.018
0.0007
0.010
0.0004
0.011
0.0004
0.009
0.0004
120.000
4.7244
150.000
5.9055
-0.018
-0.0007
-0.015
-0.0006
-0.011
-0.0004
0.030
0.0012
0.008
0.0003
0.040
0.0016
0.020
0.0008
0.011
0.0004
0.013
0.0005
0.010
0.0004
150.000
5.9055
180.000
7.0866
-0.025
-0.0010
-0.018
-0.0007
-0.013
-0.0005
0.030
0.0012
0.008
0.0003
0.045
0.0018
0.023
0.0009
0.013
0.0005
0.014
0.0006
0.010
0.0004
180.000
7.0866
250.000
9.8425
-0.030
-0.0012
-0.020
-0.0008
-0.015
-0.0006
0.030
0.0012
0.010
0.0004
0.050
0.0020
0.025
0.0010
0.015
0.0006
0.015
0.0006
0.011
0.0004
250.000
9.8425
315.000
12.4016
-0.035
-0.0014
-0.025
-0.0010
-0.018
-0.0007
0.035
0.0014
0.011
0.0004
0.060
0.0024
0.030
0.0012
0.018
0.0007
0.018
0.0007
0.013
0.0005
315.000
12.4016
400.000
15.7480
-0.040
-0.0016
-0.028
-0.0011
-0.020
-0.0008
0.040
0.0016
0.013
0.0005
0.070
0.0028
0.035
0.0014
0.020
0.0008
0.020
0.0008
0.013
0.0005
400.000
15.7480
500.000
19.6850
-0.045
-0.0018
-0.033
-0.0013
-0.023
-0.0009
0.045
0.0018
0.015
0.0006
0.080
0.0031
0.040
0.0016
0.023
0.0009
0.023
0.0009
0.015
0.0006
500.000
19.6850
630.000
24.8031
-0.050
-0.0020
-0.038
-0.0015
-0.028
-0.0011
0.050
0.0020
0.018
0.0007
0.100
0.0039
0.050
0.0020
0.025
0.0010
0.025
0.0010
0.018
0.0007
630.000
24.8031
800.000
31.4961
-0.075
-0.0030
-0.045
-0.0018
-0.035
-0.0014
0.020
0.0008
0.120
0.0047
0.060
0.0024
0.030
0.0012
0.030
0.0012
0.020
0.0008
800.000
31.4961
1000.000
39.3701
-0.100
-0.0040
-0.060
-0.0024
0.140
0.0055
0.075
0.0030
1000.000
39.3701
1250.000
49.2126
-0.125
-0.0050
0.160
0.0063
(1)Tolerance
Incl.
mm
in.
mm
in.
0.000
0.0000
O.D.
Tolerance(1)
Bearing O.D.
Over
Incl.
mm
in.
mm
in.
mm
in.
171.450
6.7500
+0.127
+0.0050
0.000
0.0000
171.450
6.7500
508.000
20.0000
+0.178
+0.0070
Bearing Bore
Tolerance
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
134.938
5.3125
-0.051
-0.0020
0.000
0.0000
46.038
1.8125
+0.127
+0.0050
-0.127
-0.0050
134.938
5.3125
441.325
17.3750
-0.076
-0.0030
46.038
1.8125
304.800
12.0000
+0.254
+0.0100
-0.254
-0.0100
441.325
17.3750
1000.000
39.3701
-0.102
-0.0040
304.800
12.0000
508.000
20.0000
+0.381
+0.0150
-0.381
-0.0150
58
Height
Tolerance(1)
Table 18. Thrust ball bearing tolerances TYPES TVL & DTVL
Bore
Bearing Bore
Over
Incl.
mm
in.
mm
in.
0.000
0.0000
504.825
19.8750
O.D.
Bearing O.D.
Tolerance(1)
Height
Tolerance(1)
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
504.825
19.8750
-0.076
-0.0030
0.000
0.0000
584.000
23.0000
-0.076
-0.0030
1524.000
60.0000
-0.127
-0.0050
584.000
23.0000
1778.000
70.0000
-0.127
-0.0050
Bearing Bore
Tolerance
Over
Incl.
Max.
mm
in.
mm
in.
mm
in.
0.381
0.0150
All Sizes
Outer Ring
Bore
Tolerance
Bore(1)
O.D.
Bore Diameter
Tolerance
O.D.(1)
Radial
Runout
Over
Incl.
Tolerance
Height
Radial
Runout
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
150.000
5.9055
-0.020
-0.0080
0.041
0.0016
80.000
3.1496
120.000
4.7244
+0.094
+0.0037
-0.254
-0.0100
150.000
5.9055
180.000
7.0866
-0.025
-0.0010
0.046
0.0018
120.000
4.7244
180.000
7.0866
+0.109
+0.0043
-0.300
-0.0118
0.041
0.0016
180.000
7.0866
250.000
9.8425
-0.030
-0.0012
0.051
0.0020
180.000
7.0866
250.000
9.8425
+0.130
+0.0051
-0.366
-0.0144
-0.036
-0.0014
0.051
0.0020
250.000
9.8425
315.000
12.4016
-0.036
-0.0014
0.061
0.0024
250.000
9.8425
315.000
12.4016
+0.155
+0.0061
-0.434
-0.0171
400.000
15.7480
-0.041
-0.0016
0.061
0.0024
315.000
12.4016
400.000
15.7480
-0.041
-0.0016
0.071
0.0028
315.000
12.4016
400.000
15.7480
+0.170
+0.0067
-0.480
-0.0189
400.000
15.7480
500.000
19.6850
-0.046
-0.0018
0.066
0.0026
400.000
15.7480
500.000
19.6850
-0.046
-0.0018
0.081
0.0032
400.000
15.7480
500.000
19.6850
+0.185
+0.0073
-0.526
-0.0207
500.000
19.6850
630.000
24.8031
-0.051
-0.0020
0.071
0.0028
500.000
19.6850
630.000
24.8031
-0.051
-0.0020
0.102
0.0040
500.000
19.6850
and up
+0.203
+0.0080
-0.584
-0.0230
630.000
24.8031
800.000
31.4961
-0.076
-0.0030
0.081
0.0032
630.000
24.8031
800.000
31.4961
-0.076
-0.0030
0.119
0.0047
800.000
31.4961
1000.000
39.3701
-0.102
-0.0040
0.089
0.0035
800.000
31.4961
1000.000
39.3701
-0.102
-0.0040
0.140
0.0055
1000.000
39.3701
1250.000
49.2126
-0.127
-0.0050
0.102
0.0040
1000.000
39.3701
1250.000
49.2126
-0.127
-0.0050
0.163
0.0064
1250.000
49.2126
1600.000
62.9921
-0.165
-0.0065
0.193
0.0076
1600.000
62.9921
2000.000
78.7402
-0.203
-0.0080
0.229
0.009
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
80.000
3.1496
120.000
4.7244
-0.020
-0.0008
0.025
0.0010
120.000
4.7244
120.000
4.7244
180.000
7.0866
-0.025
-0.0010
0.030
0.0012
180.000
7.0866
250.000
9.8425
-0.030
-0.0012
250.000
9.8425
315.000
12.4016
315.000
12.4016
(1)Tolerance
59
Table 20. tapered roller bearing tolerances Inner ring Bore (Metric)
TS
TSF
SR(1)
Bore
Bearing
Types
AA
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
18.000
0.7087
0.000 -0.012 0.000 -0.012 0.000 -0.007 0.000 -0.005 0.000 -0.005 0.000 -0.005
0.0000 -0.00047 0.0000 -0.00047 0.0000 -0.0002 0.0000 -0.0001 0.0000 -0.0001 0.0000 -0.0001
18.000
0.7087
30.000
1.1811
0.000 -0.012 0.000 -0.012 0.000 -0.008 0.000 -0.006 0.000 -0.006 0.000 -0.006
0.0000 -0.0005 0.0000 -0.0005 0.0000 -0.0003 0.0000 -0.0002 0.0000 -0.0002 0.0000 -0.0002
30.000
1.1811
50.000
1.9685
0.000 -0.012 0.000 -0.012 0.000 -0.010 0.000 -0.008 0.000 -0.008 0.000 -0.008
0.0000 -0.0005 0.0000 -0.0005 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003 0.0000 -0.0003
50.000
1.9685
80.000
3.1496
0.000 -0.015 0.000 -0.015 0.000 -0.012 0.000 -0.009 0.000 -0.008 0.000 -0.008
0.0000 -0.0006 0.0000 -0.0006 0.0000 -0.0005 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003
80.000
3.1496
120.000
4.7244
0.000 -0.020 0.000 -0.020 0.000 -0.015 0.000 -0.010 0.000 -0.008 0.000 -0.008
0.0000 -0.00079 0.0000 -0.00079 0.0000 -0.0006 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003
120.000
4.7244
180.000
7.0886
0.000 -0.025 0.000 -0.025 0.000 -0.018 0.000 -0.013 0.000 -0.008 0.000 -0.008
0.0000 -0.00098 0.0000 -0.00098 0.0000 -0.0007 0.0000 -0.0005 0.0000 -0.0003 0.0000 -0.0003
180.000
7.0866
250.000
9.8425
0.000 -0.030 0.000 -0.030 0.000 -0.022 0.000 -0.015 0.000 -0.008 0.000 -0.008
0.0000 -0.0012 0.0000 -0.0012 0.0000 -0.0009 0.0000 -0.0006 0.0000 -0.0003 0.0000 -0.0003
250.000
9.8425
265.000
10.4331
0.000 -0.035 0.000 -0.035 0.000 -0.022 0.000 -0.015 0.000 -0.008 0.000 -0.008
0.0000 -0.0014 0.0000 -0.0014 0.0000 -0.0009 0.0000 -0.0006 0.0000 -0.0003 0.0000 -0.0003
265.000
10.4331
315.000
12.4016
0.000 -0.035 0.000 -0.035 0.000 -0.022 0.000 -0.015 0.000 -0.008 0.000 -0.008
0.0000 -0.0014 0.0000 -0.0014 0.0000 -0.0009 0.0000 -0.0006 0.0000 -0.0003 0.0000 -0.0003
315.000
12.4016
400.000
15.7480
400.000
15.7480
500.000
19.6850
500.000
19.6850
630.000
24.8031
630.000
24.8031
800.000
31.4961
0.000 -0.080
0.0000 -0.0031
0.000 -0.040
0.0000 -0.0014
800.000
31.4961
0.000 -0.050
0.0000 -0.0020
0.000 -0.060
0.0000 -0.0024
0.000 -0.080
0.0000 -0.0031
2000.000
78.7402
0.000 -0.250
0.0000 -0.0098
60
Table 21. tapered roller bearing tolerances Outer ring outside diameter (Metric)
Bearing
Type
TS
TSF
SR(1)
O.D.
AA
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
18.000
0.7087
0.000
0.0000
18.000
0.7087
30.000
1.1811
0.000 -0.012 0.000 -0.012 0.000 -0.008 0.000 -0.0006 0.000 -0.008 0.000 -0.008
0.0000 -0.00047 0.0000 -0.00047 0.0000 -0.0003 0.0000 -0.0002 0.0000 -0.0003 0.0000 -0.0003
30.000
1.1811
50.000
1.9685
0.000 -0.014 0.000 -0.014 0.000 -0.009 0.000 -0.007 0.000 -0.008 0.000 -0.008
0.0000 -0.0005 0.0000 -0.0005 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003 0.0000 -0.0003
50.000
1.9685
80.000
3.1496
0.000 -0.016 0.000 -0.016 0.000 -0.011 0.000 -0.009 0.000 -0.008 0.000 -0.008
0.0000 -0.0006 0.0000 -0.0006 0.0000 -0.0004 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003
80.000
3.1496
120.000
4.7244
0.000 -0.018 0.000 -0.018 0.000 -0.013 0.000 -0.010 0.000 -0.008 0.000 -0.008
0.0000 -0.0007 0.0000 -0.0007 0.0000 -0.0005 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003
120.000
4.7244
150.000
5.9055
0.000 -0.020 0.000 -0.020 0.000 -0.015 0.000 -0.011 0.000 -0.008 0.000 -0.008
0.0000 -0.00079 0.0000 -0.00079 0.0000 -0.0006 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003
150.000
5.9055
180.000
7.0866
0.000 -0.025 0.000 -0.025 0.000 -0.018 0.000 -0.013 0.000 -0.008 0.000 -0.008
0.0000 -0.00098 0.0000 -0.00098 0.0000 -0.0007 0.0000 -0.0005 0.0000 -0.0003 0.0000 -0.0003
180.000
7.0866
250.000
9.8425
0.000 -0.030 0.000 -0.030 0.000 -0.020 0.000 -0.015 0.000 -0.008 0.000 -0.008
0.0000 -0.0012 0.0000 -0.0012 0.0000 -0.0008 0.0000 -0.0006 0.0000 -0.0003 0.0000 -0.0003
250.000
9.8425
265.000
10.4331
0.000 -0.035 0.000 -0.035 0.000 -0.025 0.000 -0.018 0.000 -0.008 0.000 -0.008
0.0000 -0.0014 0.0000 -0.0014 0.0000 -0.0010 0.0000 -0.0007 0.0000 -0.0003 0.0000 -0.0003
265.000
10.4331
315.000
12.4016
0.000 -0.035 0.000 -0.035 0.000 -0.025 0.000 -0.018 0.000 -0.008 0.000 -0.008
0.0000 -0.0014 0.0000 -0.0014 0.0000 -0.0010 0.0000 -0.0007 0.0000 -0.0003 0.0000 -0.0003
315.000
12.4016
400.000
15.7480
400.000
15.7480
500.000
19.6850
500.000
19.6850
630.000
24.8031
630.000
24.8031
800.000
31.4961
0.000 -0.075
0.0000 -0.0030
0.000 -0.040
0.0000 *0.0016
0.000 -0.050
0.0000 -0.0020
0.000 -0.060
0.0000 -0.0024
0.000 -0.080
0.0000 -0.0031
2000.000
78.7402
0.000 -0.250
0.0000 -0.0098
61
Table 22. tapered roller bearing tolerances inner ring width (Metric)
TS
TSF
62
Bore
Bearing
Types
AA
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
50.000
1.9685
0.000 -0.100 0.000 -0.050 0.000 -0.200 0.000 -0.200 0.000 -0.200 0.000 -0.200
0.0000 -0.0040 0.0000 -0.0020 0.0000 -0.0079 0.0000 -0.0079 0.0000 -0.0079 0.0000 -0.0079
50.000
1.9685
120.000
4.7244
0.000 -0.150 0.000 -0.050 0.000 -0.300 0.000 -0.300 0.000 -0.300 0.000 -0.300
0.0000 -0.0059 0.0000 -0.0020 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118
120.000
4.7244
180.000
7.0866
0.000 -0.200 0.000 -0.050 0.000 -0.300 0.000 -0.300 0.000 -0.300 0.000 -0.300
0.0000 -0.0079 0.0000 -0.0020 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118
180.000
7.0866
250.000
9.8425
0.000 -0.200 0.000 -0.050 0.000 -0.350 0.000 -0.350 0.000 -0.350 0.000 -0.350
0.0000 -0.0079 0.0000 -0.0020 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138
250.000
9.8425
265.000
10.4331
0.000 -0.200 0.000 -0.050 0.000 -0.350 0.000 -0.350 0.000 -0.350 0.000 -0.350
0.0000 -0.0079 0.0000 -0.0020 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138
265.000
10.4331
315.000
12.4016
0.000 -0.200 0.000 -0.050 0.000 -0.350 0.000 -0.350 0.000 -0.350 0.000 -0.350
0.0000 -0.0079 0.0000 -0.0020 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138
315.000
12.4016
500.000
19.6850
500.000
19.6850
630.000
24.8031
0.000 -0.350
0.0000 -0.0138
0.000 -0.350
0.0000 -0.0138
1600.000
62.9921
0.000 -0.350
0.0000 -0.0138
Table 23. tapered roller bearing tolerances inner ring stand (Metric)
Bearing
Types
TS
TSF
Bore
AA
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
80.000
3.1496
80.000
3.1496
120.000
4.7244
180.000
7.0866
250.000
9.8425
265.000
10.4331
315.000
12.4016
400.000
15.7480
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
63
Table 24. tapered roller bearing tolerances Outer ring width (Metric)
TS
TSF
O.D.
Bearing
Types
AA
Over
Incl.
Max.
Min.(1)
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
80.000
3.1496
0.000 -0.150 0.000 -0.100 0.000 -0.150 0.000 -0.150 0.000 -0.150 0.000 -0.150
0.0000 -0.0059 0.0000 -0.0040 0.0000 -0.0059 0.0000 -0.0059 0.0000 -0.0059 0.0000 -0.0059
80.000
3.1496
150.000
5.9055
0.000 -0.200 0.000 -0.100 0.000 -0.200 0.000 -0.200 0.000 -0.200 0.000 -0.200
0.0000 -0.0079 0.0000 -0.0040 0.0000 -0.0079 0.0000 -0.0079 0.0000 -0.0079 0.0000 -0.0079
150.000
5.9055
180.000
7.0866
0.000 -0.200 0.000 -0.100 0.000 -0.250 0.000 -0.250 0.000 -0.250 0.000 -0.250
0.0000 -0.0079 0.0000 -0.0040 0.0000 -0.0098 0.0000 -0.0098 0.0000 -0.0098 0.0000 -0.0098
180.000
7.0866
250.000
9.8425
0.000 -0.250 0.000 -0.100 0.000 -0.250 0.000 -0.250 0.000 -0.250 0.000 -0.250
0.0000 -0.0098 0.0000 -0.0040 0.0000 -0.0098 0.0000 -0.0098 0.0000 -0.0098 0.0000 -0.0098
250.000
9.8425
265.000
10.4331
0.000 -0.250 0.000 -0.100 0.000 -0.300 0.000 -0.300 0.000 -0.300 0.000 -0.300
0.0000 -0.0098 0.0000 -0.0040 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118
265.000
10.4331
315.000
12.4016
0.000 -0.250 0.000 -0.100 0.000 -0.300 0.000 -0.300 0.000 -0.300 0.000 -0.300
0.0000 -0.0098 0.0000 -0.0040 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118
315.000
12.4016
400.000
15.7480
400.000
15.7480
500.000
19.6850
500.000
19.6850
800.000
31.4961
800.000
31.4961
1600.000
62.9921
0.000 -0.400
0.0000 -0.0157
0.000 -0.400
0.0000 -0.0157
0.000 -0.400
0.0000 -0.0157
(1)These differ slightly from tolerances in ISO 492. These differences normally have an insignificant effect on the mounting and performance
of tapered roller bearings. The 30000 series ISO bearings also are available with the above parameter according to ISO 492.
64
Table 25. tapered roller bearing tolerances Outer ring stand (Metric)
Bearing
Types
TS
TSF(1)
O.D.
AA
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
18.000
0.7087
18.000
0.7087
80.000
3.1496
80.000
3.1496
120.000
4.7244
265.000
10.4331
315.000
12.4016
315.000
12.4016
400.000
15.7480
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(1)Stand for flanged outer ring is measured from flange backface (seating face).
(2)These sizes manufactured as matched assemblies only.
65
Table 26. tapered roller bearing tolerances overall bearing width (Metric)
TS
TSF(1)
SR(2)
Bore
Bearing
Types
AA
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
80.000
3.1496
80.000
3.1496
120.000 +0.200 -0.200 +0.100 0.000 +0.200 -0.200 +0.200 -0.200 +0.200 -0.200 +0.200 -0.200
4.7244 +0.0078 -0.0078 +0.0039 0.0000 +0.0078 -0.0078 +0.0078 -0.0078 +0.0078 -0.0078 +0.0078 -0.0078
120.000
4.7244
180.000 +0.350 -0.250 +0.150 0.000 +0.350 -0.250 +0.200 -0.250 +0.200 -0.250 +0.200 -0.250
7.0866 +0.0137 -0.0098 +0.0059 0.0000 +0.0137 -0.0098 +0.0078 -0.0098 +0.0078 -0.0098 +0.0078 -0.0098
180.000
7.0866
250.000 +0.350 -0.250 +0.150 0.000 +0.350 -0.250 +0.200 -0.300 +0.200 -0.300 +0.200 -0.300
9.8425 +0.0137 -0.0098 +0.0059 0.0000 +0.0137 -0.0098 +0.0078 -0.0118 +0.0078 -0.0118 +0.0078 -0.0118
250.000
9.8425
265.000 +0.350 -0.250 +0.200 0.000 +0.350 -0.300 +0.200 -0.300 +0.200 -0.300 +0.200 -0.300
10.4331 +0.0137 -0.0098 +0.0078 0.0000 +0.0137 -0.0118 +0.0078 -0.0118 +0.0078 -0.0118 +0.0078 -0.0118
265.000
10.4331
315.000 +0.350 -0.250 +0.200 0.000 +0.350 -0.300 +0.200 -0.300 +0.200 -0.300 +0.200 -0.300
12.4016 +0.0137 -0.0098 +0.0078 0.0000 +0.0137 -0.0118 +0.0078 -0.0118 +0.0078 -0.0118 +0.0078 -0.0118
315.000
12.4016
500.000
19.6850
+0.350 -0.400
+0.0137 -0.0157
+0.350 -0.400
+0.0137 -0.0157
+0.350 -0.450
+0.0137 -0.0177
+0.350 -0.500
+0.0137 -0.0196
1600.000
62.9921
180.000
7.0866
+0.200 0.000 +0.100 0.000 +0.200 -0.200 +0.200 -0.200 +0.200 -0.200 +0.200 -0.200
+0.0078 0.0000 +0.0039 0.0000 +0.0078 -0.0078 +0.0078 -0.0078 +0.0078 -0.0078 +0.0078 -0.0078
+0.450 -0.450
+0.0177 -0.0177
250.000
9.8425
0.000 -0.200 0.000 -0.050 0.000 -0.350 0.000 -0.350 0.000 -0.350 0.000 -0.350
0.0000 -0.0079 0.0000 -0.0020 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138
(1)For bearing type TSF, the tolerance applies to the dimension T1. Refer to the Tapered Roller Bearing Catalog available on www.timken.com.
(2)SR assemblies are manufactured to tolerance class N only.
66
TS
TSF
SR(1)
O.D.
Over
Incl.
AA
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
18.000
0.7087
0.002
0.00008
0.001
0.00004
18.000
0.7087
30.000
1.1811
0.018
0.0007
0.018
0.0007
0.005
0.0002
0.003
0.0001
0.002
0.00008
0.001
0.00004
30.000
1.1811
50.000
1.9685
0.020
0.0008
0.020
0.0008
0.006
0.0002
0.003
0.0001
0.002
0.00008
0.001
0.00004
50.000
1.9685
80.000
3.1496
0.025
0.0010
0.025
0.0010
0.006
0.0002
0.004
0.0002
0.002
0.00008
0.001
0.00004
80.000
3.1496
120.000
4.7244
0.035
0.0014
0.035
0.0014
0.006
0.0002
0.004
0.0002
0.002
0.00008
0.001
0.00004
120.000
4.7244
150.000
5.9055
0.040
0.0016
0.040
0.0016
0.007
0.0003
0.004
0.0002
0.002
0.00008
0.001
0.00004
150.000
5.9055
180.000
7.0866
0.045
0.0018
0.045
0.0018
0.008
0.0003
0.004
0.0002
0.002
0.00008
0.001
0.00004
180.000
7.0866
250.000
9.8425
0.050
0.0020
0.050
0.0020
0.010
0.0004
0.005
0.0002
0.002
0.00008
0.001
0.00004
250.000
9.8425
265.000
10.4331
0.060
0.0024
0.060
0.0024
0.011
0.0004
0.005
0.0002
0.002
0.00008
0.001
0.00004
265.000
10.4331
315.000
12.4016
0.060
0.0024
0.060
0.0024
0.011
0.0004
0.005
0.0002
0.002
0.00008
0.001
0.00004
315.000
12.4016
400.000
15.7480
0.070
0.0028
0.070
0.0028
0.013
0.0005
0.005
0.0002
400.000
15.7480
500.000
19.6850
0.080
0.0031
0.080
0.0031
500.000
19.6850
630.000
24.8031
0.100
0.0039
630.000
24.8031
800.000
31.4961
0.120
0.0047
800.000 1000.000
31.4961 39.3701
0.140
0.0055
1000.000 1200.000
39.3701 47.2441
0.160
0.0063
1200.000 1600.000
47.2441 62.9921
0.180
0.0071
1600.000 2000.000
62.9921 78.7402
0.200
0.0079
0.200
0.0079
2000.000
78.7402
67
Inch System
Tapered roller bearings
Inch system bearings are manufactured to a number of tolerance classes. Classes 4 and 2
are often referred to as standard classes. Classes 3, 0, 00 and 000 are precision classes. Inch
system bearings conform to ABMA standard 19.2.
Table 28. Tapered Roller Bearing Tolerances Inner ring Bore (Inch)
TS
TSF
TSL(1)
TDI
TDIT
TDO
TNA
Bore
Bearing
Types
00
000
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
76.200
3.0000
76.200
3.0000
304.800 +0.025 0.000 +0.025 0.000 +0.013 0.000 +0.013 0.000 +0.008 0.000 +0.008 0.000
12.0000 +0.0010 0.0000 +0.0010 0.0000 +0.0005 0.0000 +0.0005 0.0000 +0.0003 0.0000 +0.0003 0.0000
304.800
12.0000
609.600
24.0000
609.600
24.0000
1219.200
48.0000
+0.013 0.000 +0.013 0.000 +0.013 0.000 +0.013 0.000 +0.008 0.000 +0.008 0.000
+0.0005 0.0000 +0.0005 0.0000 +0.0005 0.0000 +0.0005 0.0000 +0.0003 0.0000 +0.0003 0.0000
+0.127 0.000
+0.0050 0.0000
+0.038 0.000
+0.0015 0.0000
+0.051 0.000
+0.0020 0.0000
+0.076 0.000
+0.0030 0.0000
(1)For TSL bearings these are the normal tolerances of the inner ring bore. However, bore size can be slightly reduced at large end due to tight fit
assembly of the seal on the rib. This should not have any effect on the performance of the bearing.
Table 29. Tapered Roller Bearing Tolerances Outer ring Outside Diameter (Inch)
TS
TSF
TSL
TDI
TDIT
TDO
TNA
TNASW
TNASWE
68
O.D.
Bearing
Types
00
000
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
304.800 +0.025 0.000 +0.025 0.000 +0.013 0.000 +0.013 0.000 +0.008 0.000 +0.008 0.000
12.0000 +0.0010 0.0000 +0.0010 0.0000 +0.0005 0.0000 +0.0005 0.0000 +0.0003 0.0000 +0.0003 0.0000
304.800
12.0000
609.600
24.0000
+0.051 0.000
+0.0020 0.0000
+0.076 0.000
+0.0030 0.0000
+0.127 0.000
+0.0050 0.0000
Table 30. Tapered Roller Bearing Tolerances Outer ring Flange (Inch)
Bearing
Types
TSF
O.D.
00
000
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
304.800 +0.051 0.000 +0.052 0.000 +0.051 0.000 +0.051 0.000 +0.051 0.000 +0.051 0.000
12.0000 +0.0020 0.0000 +0.0020 0.0000 +0.0020 0.0000 +0.0020 0.0000 +0.0020 0.0000 +0.0020 0.0000
304.800
12.0000
609.600 +0.076 0.000 +0.076 0.000 +0.076 0.000 +0.051 0.000 +0.051 0.000 +0.051 0.000
24.0000 +0.0030 0.0000 +0.0030 0.0000 +0.0030 0.0000 +0.0020 0.0000 +0.0020 0.0000 +0.0020 0.0000
609.600
24.0000
914.400
36.0000
+0.127 0.000
+0.0050 0.0000
+0.127 0.000
+0.0050 0.0000
Table 31. Tapered Roller Bearing Tolerances Inner ring Width (Inch)
Bearing
Types
TS
TSF
TSL
2S
TDI
TDIT
TDO
Bore
00
000
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
All Sizes
+0.076 -0.254 +0.076 -0.254 +0.076 -0.254 +0.076 -0.254 +0.076 -0.254 +0.076 -0.254
+0.0030 -0.0100 +0.0030 -0.0100 +0.0030 -0.0100 +0.0030 -0.0100 +0.0030 -0.0100 +0.0030 -0.0100
Table 32. Tapered Roller Bearing Tolerances Outer ring width (Inch)
Bearing
Types
All
Types
O.D.
00
000
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
All Sizes
+0.051 -0.254 +0.051 -0.254 +0.051 -0.254 +0.051 -0.254 +0.051 -0.254 +0.051 -0.254
+0.0020 -0.0100 +0.0020 -0.0100 +0.0020 -0.0100 +0.0020 -0.0100 +0.0020 -0.0100 +0.0020 -0.0100
69
Table 33. Tapered Roller Bearing Tolerances Inner ring Stand (Inch)
Bearing
Types
Bore
00
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
(2)
(2)
(2)
(2)
(2)
(2)
TS
TSF
TSL
2S
TDI(1)
TDIT(1)
TDO
000
Over
406.400
16.0000
(2)
(2)
(2)
(2)
(2)
(1)For class 2, TDI and TDIT bearings with an inner ring bore of 101.600 to 304.800 mm (4.0000 to 12.0000 in.), the inner ring stand is 0.102 mm
(0.0040 in.).
Table 34. Tapered Roller Bearing Tolerances Outer ring Stand (Inch)
Bearing
Types
Bore
00
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
(2)
(2)
(2)
(2)
TS
TSF(1) 266.700 304.800 +0.203
TSL 10.5000 12.0000 +0.0080
TDI
TDIT 304.800 406.400 +0.203
12.0000 16.0000 +0.0080
406.400
16.0000
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(1)Stand for flanged outer ring is measured from flange backface (seating face).
70
000
Over
TS
TSF
TSL
2S
TDI
TDIT
TDO
TNA
TNASW
TNASWE
O.D.
Over
Incl.
00
000
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
266.700
10.5000
0.051
0.0020
0.038
0.0015
0.008
0.0003
0.004
0.00015
0.002
0.000075
0.001
0.000040
266.700
10.5000
304.800
12.0000
0.051
0.0020
0.038
0.0015
0.008
0.0003
0.004
0.00015
0.002
0.000075
0.001
0.000040
304.800
12.0000
609.600
24.0000
0.051
0.0020
0.038
0.0015
0.018
0.0007
609.600
24.0000
914.400
36.0000
0.076
0.0030
0.051
0.0020
0.051
0.0020
914.400
36.0000
0.076
0.0030
0.076
0.0030
71
Table 36. Tapered Roller Bearing tolerances Overall Bearing Width (Inch)
Bearing
Types
Bore
O.D.
00
000
Over
Incl.
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
101.600
4.0000
+0.203
+0.0080
0.000
0.0000
+0.203
+0.0080
0.000
0.0000
+0.203
+0.0080
-0.203
-0.0080
+0.203
+0.0080
-0.203
-0.0080
+0.203
+0.0080
-0.203
-0.0080
+0.203
+0.0080
-0.203
-0.0080
101.600 304.800
4.0000 12.0000
+0.356
+0.0140
-0.254
-0.0100
+0.203
+0.0080
0.000
0.0000
+0.203
+0.0080
-0.203
-0.0080
+0.203
+0.0080
-0.203
-0.0080
+0.203
+0.0080
-0.203
-0.0080
+0.203
+0.0080
-0.203
-0.0080
304.800 609.600
12.0000 24.0000
0.000
0.0000
508.000
20.0000
+0.381
+0.0150
-0.381
-0.0150
+0.203
+0.0080
-0.203
-0.0080
304.800 609.600
12.0000 24.0000
508.000
20.0000
+0.381
+0.0150
-0.381
-0.0150
+0.381
+0.0150
-0.381
-0.0150
+0.381
+0.0150
-0.381
-0.0150
+0.381
+0.0150
-0.381
-0.0150
0.000 127.000
0.0000 5.0000
TNA
TNASW
TNASWE 127.000
5.0000
+0.254
+0.0100
0.000
0.0000
+0.254
+0.0100
0.000
0.0000
+0.762
+0.0300
0.000
0.0000
+0.762
+0.0300
0.000
0.0000
0.000
0.0000
101.600
4.0000
+0.406
+0.0160
0.000
0.0000
+0.406
+0.0160
0.000
0.0000
+0.406
+0.0160
-0.406
-0.0160
+0.406
+0.0160
-0.406
-0.0160
+0.406
+0.0160
-0.406
-0.0160
+0.406
+0.0160
-0.406
-0.0160
101.600 304.800
4.0000 12.0000
+0.711
+0.0280
-0.508
-0.0200
+0.406
+0.0160
-0.203
-0.0080
+0.406
+0.0160
-0.406
-0.0160
+0.406
+0.0160
-0.406
-0.0160
+0.406
+0.0160
-0.406
-0.0160
+0.406
+0.0160
-0.406
-0.0160
304.800 609.600
12.0000 24.0000
0.000
0.0000
508.000
20.0000
+0.762
+0.0300
-0.762
-0.0300
+0.406
+0.0160
-0.406
-0.0160
304.800 609.600
12.0000 24.0000
508.000
20.0000
+0.762
+0.0300
-0.762
-0.0300
+0.762
+0.0300
-0.762
-0.0300
TS
TSF(1)
TSL
609.600
24.0000
TDI
TDIT
TDO
2S
609.600
24.0000
+0.762
+0.0300
-0.762
-0.0300
+0.762
+0.0300
-0.762
-0.0300
0.000
0.0000
101.600
4.0000
+0.457
+0.0180
-0.051
-0.0020
+0.457
+0.0180
-0.051
-0.0020
(1)For bearing type TSF, the tolerance applies to the dimension T1. Refer to the Tapered Roller Bearing Catalog available on www.timken.com.
72
Bearing Class
Precision
2
Range
Precision
3
Bore
Deviation
Range
Precision
4
Over
Incl.
Over
Incl.
Max.
Min.
Over
Incl.
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
304.800
12.0000
+0.025
+0.0010
0.000
0.0000
+0.013
+0.0005
0.000
0.0000
0.000
0.0000
25.400
1.0000
+0.076
+0.0030
-0.076
-0.0030
304.800
12.0000
609.600
24.0000
+0.051
0.0020
0.000
0.0000
+0.025
+0.0010
0.000
0.0000
25.400
1.0000
76.200
3.0000
+0.102
+0.0040
-0.102
-0.0040
609.600
24.0000
914.400
36.0000
+0.076
+0.0030
0.000
0.0000
+0.038
+0.0015
0.000
0.0000
76.200
3.0000
+0.127
+0.0050
-0.127
-0.0050
914.400
36.0000
1219.200
48.0000
+0.102
+0.0040
0.000
0.0000
+0.051
0.0020
0.000
0.0000
1219.200
48.0000
+0.127
+0.0050
0.000
0.0000
+0.076
+0.030
0.000
0.0000
TTC, TTSP
Table 38. Thrust Tapered Roller Bearing Tolerances outside diameter (Inch)
TTHD, TTHDFL, TTVS
Outside Diameter
Bearing Class
Precision
2
Range
Deviation
Range
Precision
4
Precision
3
Over
Incl.
Over
Incl.
Max.
Min.
Over
Incl.
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
304.800
12.0000
+0.025
+0.0010
0.000
0.0000
+0.013
+0.0005
0.000
0.0000
0.000
0.0000
127.000
5.0000
+0.254
+0.0100
0.000
0.0000
304.800
12.0000
609.600
24.0000
+0.051
0.0020
0.000
0.0000
+0.025
+0.0010
0.000
0.0000
127.000
5.0000
203.200
8.0000
+0.381
+0.0150
0.000
0.0000
609.600
24.0000
914.400
36.0000
+0.076
+0.0030
0.000
0.0000
+0.038
+0.0015
0.000
0.0000
203.200
8.0000
+0508
+0.200
0.000
0.0000
TTC, TTSP
Bearing Class
Precision
2
Range
Width
Deviation
Range
Precision
4
Over
Incl.
Over
Incl.
Max.
Min.
Over
Incl.
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
+0.381
+0.0150
-0.381
-0.0150
+0.203
+0.0080
-0.203
-0.0080
0.000
0.0000
76.200
3.0000
+0.254
+0.0100
-0.254
-0.0100
76.200
3.0000
127.000
5.0000
+0.381
+0.0150
-0.381
-0.0150
127.000
5.0000
+0508
+0.200
-0.508
-0.0200
All Sizes
TTC, TTSP
73
Mounting
All bearing types are typically mounted onto a shaft and into a
housing wherein the shaft and housing have shoulders to back
the rings. The purpose of the shoulder is to positively establish
the axial location and alignment of the bearing under all operating
conditions. Various types of backing shoulder designs can be
used as shown in fig. 77. The conventional method uses a shoulder
machined on a shaft or in the housing. In some applications,
snap rings are used as the shoulder. For either solid shoulder
or snap ring designs, spacers can be used between the bearing
raceway and shoulder if necessary. It is essential that a shoulder
be square with the bearing ring and of sufficient diameter to
provide adequate backing of the bearing raceway. It also must be
Spacer
Spacer
Spacer
Spacer
Spacer
Snap
Snap
ringring
Snap
ring
Snap ring
Snap
ring
Conventional
Fig. 77. Backing designs.
Warning
74
Splitspacer
spacer
Split
Fitting Practice
As a general guideline, bearing rings mounted on a rotating
member should have an interference fit. Loose fits may permit the
ring to creep or turn and wear the mating surface and backing
shoulder. This wear can result in excessive bearing looseness
and damage to the bearing, shaft or housing.
Shaft
O.D.
Tolerance
Range
h6 h5
r6 r7
p6
k5 k6
j5 j6
m5 m6
Nominal Bearing Bore
Bore Tolerance
g6
Loose Fit Range
F7
Housing
Bore
Tolerance
Range
G7 H8
H7
H6
J7 J6
K6 K7
O.D. Tolerance
M6 M7
N6 N7
P6 P7
75
Setting
Installation
Adequate tools must be used to properly fit the inner rings onto
the shaft and outer rings into the housing to avoid damage. Direct
shock on the rings must be avoided.
Most applications require a tight interference fit of one or both
rings. It is acceptable to heat or cool rings to ease assembly.
Standard bearings should not be heated above 120 C
(250 F) or cooled below -55 C (-65 F). Precision bearings
should not be heated above 65 C (150 F) or cooled below
-30 C (-20 F).
An alternate method of mounting, generally used on smaller
sizes, is to press the bearing onto the shaft or into the housing
using an arbor press.
For more information on these installation procedures, please
contact your Timken engineer.
Specific mounting design, fitting practice, setting and installation
recommendations are summarized in the following pages for
tapered roller, cylindrical roller, spherical roller, radial ball and
angular contact ball bearings.
76
Fitting Practice
Effective bearing
spread
Outer-ring
follower
Indirect mounting
Outer-ring
carrier
Cup follower
Carrier
Fig. 80. Bearing setting
devices - direct
mounting.
Effective bearing
spread
Direct mounting
Fig. 79. Comparison of mounting stability between indirect and
direct mountings.
Locknuts
Locknuts
Locknutwith
with
Locknut
tonguedwasher
washer
tongued
Stake-nut
Stakenut
End
End plate
plate
Stake-nut
Locknut with
tongued washer
77
Certain table fits may not be adequate for light shaft and housing
sections, shafts other than steel, nonferrous housings, critical
operation conditions such as high speed, unusual thermal or
loading conditions or a combination thereof. Also, assembly
procedures and the means and ease of obtaining the bearing
setting may require special fits. In these cases, experience
should be used as a guideline or your Timken engineer should
be consulted for review and suggestions.
Rotating inner rings generally should be applied with an
interference fit. In special cases, loose fits may be considered
if it has been determined by test or experience they will perform
satisfactorily. The term rotating inner ring describes a condition
in which the inner ring rotates relative to the load. This may occur
with a rotating inner ring under a stationary load or a stationary
inner ring with a rotating load. Loose fits will permit the inner
rings to creep and wear the shaft and the backing shoulder. This
may result in excessive bearing looseness and possible bearing
and shaft damage.
Stationary inner ring fitting practice depends on the application.
Under conditions of high speed, heavy loads or shock, interference
fits using heavy-duty fitting practices should be used. With inner
rings mounted on unground shafts subjected to moderate loads
(no shock) and moderate speeds, a metal-to-metal or near zero
average fit is used. In sheave and wheel applications using
unground shafts, or in cases using ground shafts with moderate
loads (no shock), a minimum fit near zero to a maximum looseness
that varies with the inner ring bore size is suggested. In stationary
inner ring applications requiring hardened and ground spindles,
a slightly looser fit may be satisfactory. Special fits also may
be necessary on installations such as multiple sheave crane
blocks.
78
( )( )
K
d
= 0.5
0.39 do
( )( )
K
Do
0.39 D
{ }
[
]
{ ] }
( )[ ( )]
( ) ]
d
dsi
( )
do d
K
Double-row and four-row bearings that are provided with
= 0.5
S
0.39
dsi 2
spacers are examples of matched assemblies. These bearings
1do
are pre-set to a specific bench endplay or axial clearance prior to
installation into the application. Mounting the bearing with a tight
Outer ring setting reduction/width increase:
fit will reduce this bench endplay. In order to meet the desired
Do D 2
1mounted setting, the bench endplay must be compensated for
K D DH
the fit effect.
= 0.5
H
0.39
Do 2
1
Set-Right assemblies rely on the control of bearing, shaft and
DH
housing tolerances to known distributions, resulting in a statistical
mounted bearing setting range. This mounted setting takes into
For shaft or housing material other than steel, consult your
account any reductions in setting due to tight fits.
Timken engineer.
( )
( )
( )
( )
do
d si
Do D
Parameters for
calculation of fit
effect on setting.
79
Setting
Setting is defined as the axial clearance between roller and
raceway. Establishing the setting at the time of assembly is an
inherent advantage of tapered roller bearings. They can be set
to provide optimum performance in almost any application. Fig.
83 gives an example of the relationship between fatigue life
and bearing setting. Unlike some types of anti-friction bearings,
tapered roller bearings do not rely strictly on housing or shaft fits
to obtain a certain bearing setting. One ring can be moved axially
relative to the other to obtain the desired bearing setting.
100
0.05
0.10
0.15 mm
0.0020 0.0040 0.0060 in
Axial clearance
360 180
216
135
Preload Endplay
0
100
1. Standard mounting
2. Pre-set assemblies
Axial Endplay
80
Fit effect(1)
Solid shaft/heavy section housing
= 0.5
( )( )
K
0.39
d
do
( )( )
K
0.39
Do
= 0.5
( )( )
K
0.39
do
1 1 -
( )
( )
dsi
d
dsi
do
DH
do
d si
Do D
= 0.5
(1)These
( )( )
K
Do
0.39
( )
( )
D
DH
1 - Do
DH
1 -
2
2
Temperature effect
Setting methods
T
= aTDT
[( )( ) ( )( ) [
K1
Do1
0.39
K2
Do2
0.39
+L
T
= aTDT
[( )( ) ( )( ) [
K1
Do1
0.39
K2
Do2
0.39
-L
Direct mounting
Indirect mounting
Direct mounting
Indirect mounting
Application type.
Duty cycle/loading.
Operational features of adjacent mechanical drive
elements.
81
Effective bearing
spread
Fitting Practice
Tables 55-66 on pages 124-129 list the recommended fitting
practices for spherical roller and cylindrical roller bearings. The
tables assume:
Float position
Float position
Fixed position
Fixed position
82
Effective bearing
spread
Direct mounting
Fig. 88 shows a pulverizer wheel assembly where a doublerow spherical roller bearing is mounted in combination with a
cylindrical roller bearing. In this application, the cylindrical roller
bearing allows the shaft to float relative to the housing.
Fitting practice
Interference fits between the outer ring and steel or cast iron
housing will reduce radial clearance by approximately 60
percent.
Thermal gradients
Note
It is critical to select the RIC that allows for this reduction.
For help selecting the correct radial internal clearance for your
application, consult with your Timken engineer.
Fig. 90. Spherical roller
bearing mounted with
an adapter sleeve.
Setting
83
Table 40. Radial Internal Clearance Limits spherical Roller Bearings cylindrical bore
Cylindrical Bore
Normal
CO
Bore
(Nominal)
Min.
C4
Max.
C2
Over
Min.
Max.
C3
C5
Incl.
Min.
Max.
Min.
Max.
Min.
Max.
mm
mm
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
24
30
0.015
0.0006
0.025
0.001
0.04
0.0016
0.055
0.0022
0.075
0.003
0.095
0.0037
30
40
0.015
0.0006
0.03
0.0012
0.045
0.0018
0.06
0.0024
0.08
0.0031
1
0.0039
40
50
0.02
0.0008
0.035
0.0014
0.055
0.0022
0.075
0.003
0.1
0.0039
0.125
0.0049
50
65
0.02
0.0008
0.04
0.0016
0.065
0.0026
0.09
0.0035
0.12
0.0047
0.15
0.0059
65
80
0.03
0.0012
0.05
0.002
0.08
0.0031
0.11
0.0043
0.145
0.0057
0.18
0.0071
80
100
0.035
0.0014
0.06
0.0024
0.1
0.0039
0.135
0.0053
0.18
0.0071
0.225
0.0089
100
120
0.04
0.0016
0.075
0.003
0.12
0.0047
0.16
0.0063
0.21
0.0083
0.26
0.0102
120
140
0.05
0.002
0.095
0.0037
0.145
0.0057
0.19
0.0075
0.24
0.0094
0.3
0.0118
140
160
0.06
0.0024
0.11
0.0043
0.17
0.0067
0.22
0.0087
0.28
0.011
0.35
0.0138
160
180
0.065
0.0026
0.12
0.0047
0.18
0.0071
0.24
0.0094
0.31
0.0122
0.39
0.0154
180
200
0.07
0.0028
0.13
0.0051
0.2
0.0079
0.26
0.0102
0.34
0.0134
0.43
0.0169
200
225
0.08
0.0031
0.14
0.0055
0.22
0.0087
0.29
0.0114
0.38
0.015
0.47
0.0185
225
250
0.09
0.0035
0.15
0.0059
0.24
0.0094
0.32
0.0126
0.42
0.0165
0.52
0.0205
250
280
0.1
0.0039
0.17
0.0067
0.26
0.0102
0.35
0.0138
0.46
0.0181
0.57
0.0224
280
315
0.11
0.0043
0.19
0.0075
0.28
0.011
0.37
0.0146
0.5
0.0197
0.63
0.0248
315
355
0.12
0.0047
0.2
0.0079
0.31
0.0122
0.41
0.0161
0.55
0.0217
0.69
0.0272
355
400
0.13
0.0051
0.22
0.0087
0.34
0.0134
0.45
0.0177
0.6
0.0236
0.75
0.0295
400
450
0.14
0.0055
0.24
0.0094
0.37
0.0146
0.5
0.0197
0.66
0.026
0.82
0.0323
Continued on next page.
84
Continued
from
previous
page.
Table
40.
Radial
Internal Clearance Limits spherical Roller Bearings cylindrical bore
Cylindrical Bore
Normal
CO
Bore
(Nominal)
Min.
C4
Max.
C2
Min.
Max.
C3
C5
Incl.
Min.
Max.
Min.
Max.
Min.
Max.
mm
mm
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
450
500
0.14
0.0055
0.26
0.0102
0.41
0.0161
0.55
0.0217
0.72
0.0283
0.9
0.0354
500
560
0.15
0.0059
0.28
0.011
0.44
0.0173
0.6
0.0236
0.78
0.0307
1
0.0394
560
630
0.17
0.0067
0.31
0.0122
0.48
0.0189
0.65
0.0256
0.85
0.0335
1.1
0.0433
630
710
0.19
0.0075
0.35
0.0138
0.53
0.0209
0.7
0.0276
0.92
0.0362
1.19
0.0469
710
800
0.21
0.0083
0.39
0.0154
0.58
0.0228
0.77
0.0303
1.01
0.0398
1.3
0.0512
800
900
0.23
0.0091
0.43
0.0169
0.65
0.0256
0.86
0.0339
1.12
0.0441
1.44
0.0567
900
1000
0.26
0.0102
0.48
0.0189
0.71
0.028
0.93
0.0366
1.22
0.048
1.57
0.0618
Over
85
Table 41. Radial Internal Clearance Limits spherical Roller Bearings Tapered Bore
Tapered Bore
Normal
CO
Min.
Max.
Bore
(Nominal)
C2
Over
Suggested
Reduction of RIC
Due to
Installation
C4
Min.
Max.
C3
C5
Suggested
RIC After
Installation
1:30 Taper(2)
Incl.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Max.
Min.
Max.
Min.
Min.
mm
mm
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
24
30
0.02
0.0008
0.03
0.0012
0.04
0.0016
0.055
0.0022
0.075
0.003
0.095
0.0037
0.015
0.0006
0.02
0.0008
0.30
0.0118
0.23
0.0091
0.015
0.0006
30
40
0.025
0.001
0.035
0.0014
0.05
0.002
0.065
0.0026
0.085
0.0033
0.105
0.0041
0.02
0.0008
0.025
0.001
0.38
0.0150
0.30
0.0118
0.015
0.0006
40
50
0.03
0.0012
0.045
0.0018
0.06
0.0024
0.08
0.0031
0.1
0.0039
0.13
0.0051
0.025
0.001
0.03
0.0012
0.46
0.0181
0.38
0.0150
0.02
0.0008
50
65
0.04
0.0016
0.055
0.0022
0.075
0.003
0.095
0.0037
0.12
0.0047
0.16
0.0063
0.03
0.0012
0.038
0.0015
0.56
0.0220
0.46
0.0181
0.025
0.001
65
80
0.05
0.002
0.07
0.0028
0.095
0.0037
0.12
0.0047
0.15
0.0059
0.2
0.0079
0.038
0.0015
0.051
0.002
0.76
0.0299
0.56
0.0220
0.025
0.001
80
100
0.055
0.0022
0.08
0.003
0.11
0.0043
0.14
0.0055
0.18
0.0071
0.23
0.0091
0.046
0.0018
0.064
0.0025
0.97
0.0382
0.68
0.0268
0.036
0.0014
100
120
0.065
0.0026
0.1
0.0039
0.135
0.0053
0.17
0.0067
0.22
0.0087
0.28
0.011
0.051
0.002
0.071
0.0028
1.07
0.0421
0.76
0.0299
2.54
0.1000
1.90
0.0748
0.051
0.002
120
140
0.08
0.0031
0.12
0.0047
0.16
0.0063
0.2
0.0079
0.26
0.0102
0.33
0.013
0.064
0.0025
0.089
0.0035
1.27
0.0500
0.89
0.0350
3.05
0.1201
2.29
0.0902
0.056
0.0022
140
160
0.09
0.0035
0.13
0.0051
0.18
0.0071
0.23
0.0091
0.3
0.0118
0.38
0.015
0.076
0.003
0.102
0.004
1.52
0.0598
1.14
0.0449
3.43
0.1350
2.67
0.1051
0.056
0.0022
160
180
0.1
0.0039
0.14
0.0055
0.2
0.0079
0.26
0.0102
0.34
0.0134
0.43
0.0169
0.076
0.003
0.114
0.0045
1.65
0.0650
1.14
0.0449
4.06
0.1598
2.67
0.1051
0.061
0.0024
180
200
0.11
0.0043
0.16
0.0063
0.22
0.0087
0.29
0.0114
0.37
0.0146
0.47
0.0185
0.089
0.0035
0.127
0.005
1.90
0.0748
1.40
0.0551
4.45
0.1752
3.05
0.1201
0.071
0.0028
200
225
0.12
0.0047
0.18
0.0071
0.25
0.0098
0.32
0.0126
0.41
0.0161
0.52
0.0205
0.102
0.004
0.14
0.0055
2.03
0.0799
1.52
0.0598
4.83
0.1902
3.56
0.1402
0.076
0.003
225
250
0.14
0.0055
0.2
0.0079
0.27
0.0106
0.35
0.0138
0.45
0.0177
0.57
0.0224
0.114
0.0045
0.152
0.006
2.29
0.0902
1.78
0.0701
5.33
0.2098
4.06
0.1598
0.089
0.0035
250
280
0.15
0.0059
0.22
0.0087
0.3
0.0118
0.39
0.0154
0.49
0.0193
0.62
0.0244
0.114
0.0045
0.165
0.0065
2.54
0.1000
1.78
0.0701
5.84
0.2299
4.06
0.1598
0.102
0.004
280
315
0.17
0.0067
0.24
0.0094
0.33
0.013
0.43
0.0169
0.54
0.0213
0.68
0.0268
0.127
0.005
0.178
0.007
2.67
0.1051
1.90
0.0748
6.22
0.2449
4.45
0.1752
0.102
0.004
315
355
0.19
0.0075
0.27
0.0106
0.36
0.0142
0.47
0.0185
0.59
0.0232
0.74
0.0291
0.14
0.0055
0.19
0.0075
2.79
0.1098
2.03
0.0799
6.60
0.2598
4.83
0.1902
0.114
0.0045
355
400
0.21
0.0083
0.3
0.0118
0.4
0.0157
0.52
0.0205
0.65
0.0256
0.82
0.0323
0.152
0.006
0.203
0.008
3.05
0.1201
2.29
0.0902
7.11
0.2799
5.33
0.2098
0.127
0.005
400
450
0.23
0.0091
0.33
0.013
0.44
0.0173
0.57
0.0224
0.72
0.0283
0.91
0.0358
0.165
0.0065
0.216
0.0085
3.3
0.1299
2.54
0.1000
7.62
0.3000
5.84
0.2299
0.152
0.006
Note: Axial displacement values apply to solid-steel shafts or hollow shafts with bore diameter less than half the shaft diameter.
For shaft materials other than steel, or for thin-walled shafts, please consult your Timken engineer
(1)This displacement is valid for assembly of tapered bore bearings and is measured starting from a line-to-line fit of the bearing
bore to the tapered shaft.
(2)1:12 Taper used for 222, 223, 230, 231, 232, 233, 239 series. 1:30 Taper used for 240, 241, 242 series. For sleeve mounting, multiply
axial displacement values by 1.1 for 1:12 Taper or by 1.05 for 1:30 Taper. For questions on tapered shaft data, consult your
Timken engineer.
86
Tapered Bore
Normal
CO
Min.
Max.
Bore
(Nominal)
C2
Over
Suggested
Reduction of RIC
Due to
Installation
C4
Min.
Max.
C3
C5
Suggested
RIC After
Installation
1:30 Taper(2)
Incl.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Max.
Min.
Max.
Min.
Min.
mm
mm
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
450
500
0.26
0.0102
0.37
0.0146
0.49
0.0193
0.63
0.0248
0.79
0.0311
1
0.0394
0.178
0.007
0.229
0.009
3.43
0.1350
2.67
0.1051
8.00
0.3150
6.22
0.2449
0.165
0.0065
500
560
0.29
0.0114
0.41
0.0161
0.54
0.0213
0.68
0.0268
0.87
0.0343
1.1
0.0433
0.203
0.008
0.254
0.01
3.81
0.1500
3.05
0.1201
8.89
0.3500
7.11
0.2799
0.178
0.007
560
630
0.32
0.0126
0.46
0.0181
0.6
0.0236
0.76
0.0299
0.98
0.0386
1.23
0.0484
0.229
0.009
0.279
0.011
4.19
0.1650
3.43
0.1350
9.78
0.3850
8.00
0.3150
0.203
0.008
630
710
0.35
0.0138
0.51
0.0201
0.67
0.0264
0.85
0.0335
1.09
0.0429
1.36
0.0535
0.254
0.01
0.305
0.012
4.57
0.1799
3.81
0.1500
10.67
0.4201
8.89
0.3500
0.203
0.008
710
800
0.39
0.0154
0.57
0.0224
0.75
0.0295
0.96
0.0378
1.22
0.048
1.5
0.0591
0.279
0.011
0.356
0.014
5.33
0.2098
4.19
0.1650
12.45
0.4902
9.78
0.3850
0.229
0.009
800
900
0.44
0.0173
0.64
0.0252
0.84
0.0331
1.07
0.0421
1.37
0.0539
1.69
0.0665
0.305
0.012
0.381
0.015
5.72
0.2252
4.57
0.1799
13.33
0.5248
10.67
0.4201
0.252
0.01
900
1000
0.49
0.0193
0.71
0.028
0.93
0.0366
1.19
0.0469
1.52
0.0598
1.86
0.0732
0.356
0.014
0.432
0.017
6.48
0.2551
5.33
0.2100
15.11
0.5949
12.45
0.4902
0.279
0.011
Note: Axial displacement values apply to solid-steel shafts or hollow shafts with bore diameter less than half the shaft diameter.
For shaft materials other than steel, or for thin-walled shafts, please consult your Timken engineer
(1)This displacement is valid for assembly of tapered bore bearings and is measured starting from a line-to-line fit of the bearing
bore to the tapered shaft.
(2)1:12 Taper used for 222, 223, 230, 231, 232, 233, 239 series. 1:30 Taper used for 240, 241, 242 series. For sleeve mounting, multiply
axial displacement values by 1.1 for 1:12 Taper or by 1.05 for 1:30 Taper. For questions on tapered shaft data, consult your
Timken engineer.
87
Table 42. Radial Internal Clearance limits Cylindrical roller bearings Cylindrical Bore
Bore RIC
Bore (Nominal)
88
C2
C0
C3
C4
C5
Over
Incl.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10
0.3937
0.000
0.0000
0.025
0.0010
0.020
0.0008
0.0045
0.0018
0.035
0.0014
0.060
0.0024
0.050
0.0020
0.075
0.0030
10
0.3937
24
0.9449
0.000
0.0000
0.025
0.0010
0.020
0.0008
0.0045
0.0018
0.035
0.0014
0.060
0.0024
0.050
0.0020
0.075
0.0030
0.065
0.0026
0.090
0.0035
24
0.9449
30
1.1811
0.000
0.0000
0.025
0.0010
0.020
0.0008
0.0045
0.0018
0.035
0.0014
0.060
0.0024
0.050
0.0020
0.075
0.0030
0.070
0.0028
0.095
0.0037
30
1.1811
40
1.5748
0.005
0.0002
0.030
0.0012
0.025
0.0010
0.050
0.0020
0.0045
0.0018
0.070
0.0028
0.060
0.0024
0.085
0.0033
0.080
0.0031
0.105
0.0041
40
1.5748
50
1.9685
0.005
0.0002
0.035
0.0014
0.030
0.0012
0.060
0.0024
0.050
0.0020
0.080
0.0031
0.070
0.0028
0.100
0.0039
0.095
0.0037
0.125
0.0049
50
1.9685
65
2.5591
0.010
0.0004
0.040
0.0016
0.040
0.0016
0.070
0.0028
0.060
0.0024
0.090
0.0035
0.080
0.0031
0.110
0.0043
0.110
0.0043
0.140
0.0055
65
2.5591
80
3.1496
0.010
0.0004
0.0045
0.0018
0.040
0.0016
0.075
0.0030
0.065
0.0026
0.100
0.0039
0.090
0.0035
0.125
0.0049
0.130
0.0051
0.165
0.0065
80
3.1496
100
3.9370
0.015
0.0006
0.050
0.0020
0.050
0.0020
0.085
0.0033
0.075
0.0030
0.110
0.0043
0.105
0.0041
0.140
0.0055
0.155
0.0061
0.190
0.0075
100
3.9370
120
4.7244
0.015
0.0006
0.055
0.0022
0.050
0.0020
0.090
0.0035
0.085
0.0033
0.125
0.0049
0.125
0.0049
0.165
0.0065
0.180
0.0071
0.220
0.0087
120
4.7244
140
5.5118
0.015
0.0006
0.060
0.0024
0.060
0.0024
0.105
0.0041
0.100
0.0039
0.145
0.0057
0.145
0.0057
0.190
0.0075
0.200
0.0079
0.245
0.0096
140
5.5118
160
6.2992
0.020
0.0008
0.070
0.0028
0.070
0.0028
0.120
0.0047
0.115
0.0045
0.165
0.0065
0.165
0.0065
0.215
0.0085
0.225
0.0089
0.275
0.0108
160
6.2992
180
7.0866
0.025
0.0010
0.075
0.0030
0.075
0.0030
0.125
0.0049
0.120
0.0047
0.170
0.0067
0.170
0.0067
0.220
0.0087
0.250
0.0098
0.300
0.0118
180
7.0866
200
7.8740
0.035
0.0014
0.090
0.0035
0.090
0.0035
0.145
0.0057
0.140
0.0055
0.195
0.0077
0.195
0.0077
0.250
0.0098
0.275
0.0108
0.330
0.0130
200
7.8740
225
8.8583
0.045
0.0018
0.105
0.0041
0.105
0.0041
0.165
0.0065
0.160
0.0063
0.220
0.0087
0.220
0.0087
0.280
0.0110
0.305
0.0120
0.365
0.0144
225
8.8583
250
9.8425
0.045
0.0018
0.110
0.0043
0.110
0.0043
0.175
0.0069
0.170
0.0067
0.235
0.0093
0.235
0.0093
0.300
0.0118
0.330
0.0130
0.395
0.0156
250
9.8425
280
11.0236
0.055
0.0022
0.125
0.0049
0.125
0.0049
0.195
0.0077
0.190
0.0075
0.260
0.0102
0.260
0.0102
0.330
0.0130
0.370
0.0146
0.440
0.0173
280
11.0236
315
12.4016
0.055
0.0022
0.130
0.0051
0.130
0.0051
0.205
0.0081
0.200
0.0079
0.275
0.0108
0.275
0.0108
0.350
0.0138
0.410
0.0161
0.485
0.0191
315
12.4016
355
13.9764
0.065
0.0026
0.145
0.0057
0.145
0.0057
0.225
0.0089
0.225
0.0089
0.305
0.0120
0.305
0.0120
0.385
0.0152
0.455
0.0179
0.535
0.0211
355
13.9764
400
15.7480
0.100
0.0039
0.190
0.0075
0.190
0.0075
0.280
0.0110
0.280
0.0110
0.370
0.0146
0.370
0.0146
0.460
0.0181
0.510
0.0201
0.600
0.0236
400
15.7480
450
17.7165
0.110
0.0043
0.210
0.0083
0.210
0.0083
0.310
0.0122
0.310
0.0122
0.410
0.0161
0.410
0.0161
0.510
0.0201
0.565
0.0222
0.665
0.0262
450
17.7165
500
19.6850
0.110
0.0043
0.220
0.0087
0.220
0.0087
0.330
0.0130
0.330
0.0130
0.440
0.0173
0.440
0.0173
0.550
0.0217
0.625
0.0246
0.735
0.0289
500
19.6850
560
22.0472
0.120
0.0047
0.240
0.0095
0.240
0.0095
0.360
0.0142
0.360
0.0142
0.480
0.0189
0.480
0.0189
0.600
0.0236
0.690
0.0272
0.810
0.0319
560
22.0472
630
24.8031
0.140
0.0055
0.260
0.0102
0.260
0.0102
0.380
0.0150
0.380
0.0150
0.500
0.0197
0.500
0.0197
0.620
0.0244
0.780
0.0307
0.900
0.0354
630
24.8031
710
27.9528
0.145
0.0057
0.285
0.0112
0.285
0.0112
0.425
0.0167
0.425
0.0167
0.565
0.0222
0.565
0.0222
0.705
0.0278
0.865
0.0341
1.005
0.0396
710
27.9528
800
31.4961
0.150
0.0059
0.310
0.0122
0.310
0.0122
0.470
0.0185
0.470
0.0185
0.630
0.0248
0.630
0.0248
0.790
0.0311
0.975
0.0384
1.135
0.0447
800
31.4961
900
35.4331
0.180
0.0071
0.350
0.0138
0.350
0.0138
0.520
0.0205
0.520
0.0205
0.690
0.0272
0.690
0.0272
0.860
0.0339
1.095
0.0431
1.265
0.0498
900
35.4331
1000
39.3701
0.200
0.0079
0.390
0.0154
0.390
0.0154
0.580
0.0228
0.580
0.0228
0.770
0.0303
0.770
0.0303
0.960
0.0378
1.215
0.0478
1.405
0.0553
EXAMPLE #1
Calculating RIC Reduction Using a Spherical Roller Bearing with Tapered Bore
Given bearing number 22328K C3 (140 mm bore with C3 clearance)
is to be mounted on a tapered shaft. Using a set of feeler gauges,
RIC is measured at:
RIC = 0.178 mm (0.007 in.)
or
For this example, the value of 0.076 mm (0.003 in.) was obtained by taking the midrange value of the upper and lower limits found in the tables on pages 86-88.
EXAMPLE #2
Calculating RIC Reduction Using a Spherical Roller Bearing with Cylindrical Bore
Observations:
We can use the nominal fit charts on page 124 (shaft fit) and 125
(housing fit) to help guide our ISO fit selection.
From the shaft fit chart at 150 mm nominal bore at p6 (page 136),
the shaft tolerance is nominal +0.043 to +0.068 mm (+0.0017
to +0.0027 in.). Therefore, we have the following bore range:
From the housing fit chart at 270 mm nominal O.D. at H8 (page 139),
the housing bore tolerance is nominal +0.000 to +0.081 mm (+0.0000 in.,
+0.0032 in.). Therefore, we have the following bore range:
max. fit
max. fit
min. fit
min. fit
89
EXAMPLE #2 continued
For the primary selection of RIC, the major parameters are the
bearing speed and the fits. For our example, we know that the
shaft fit is 0.043 mm (0.0017 in.) tight to 0.093 mm (0.0037 in.) tight.
We know the housing fit is 0 mm to 0.116 mm (0.0046 in.) loose.
We also know that the bearing speed is 1200 RPM or 60 percent
of the speed rating.
As a general rule of thumb, we increase the the clearance for
operating speeds that exceed 70 percent of the speed rating, due
to concerns over internal heat generation and thermal growth.
In this case, we are at 60 percent of the speed rating, so normal
clearance, ISO C0 or Co, can be selected.
Observing the RIC chart on page 84, we find for 150 mm nominal
bore at Co, the RIC will be 0.110 mm to 0.170 mm (0.0043 in. to 0.0067
in.). We also note that the minimum recommended RIC (installed)
is 0.056 mm (0.0022 in.).
Also from page 83, we note that we get an approximate reduction
of RIC that is 80 percent of interference fit on a solid shaft and 60
percent of the O.D. interference fit in a steel or cast iron housing.
Since we have a loose housing fit, there will be no RIC reduction
from that fit.
90
min. clearance
Installation
When using a tight-fit inner ring, the method of assembly will depend
on whether the bearing has a cylindrical or tapered bore.
The oil bath is shown in fig. 93. The bearing should not be in
direct contact with the heat source.
BEARING
BEARING HELD
FROM BOTTOM
BY SCREEN
Trial runs with the unit and bearing are usually necessary to
obtain proper timing.
OIL
BEARING SUPPORT
BLOCK
FLAME BURNER
Note
Never use steam or hot water when cleaning the bearings
because these methods can create rust or corrosion.
Note
Never expose any surface of a bearing to the flame of a torch.
Note
CAUTION
91
The O.D. of the tube should not exceed the shaft backing
diameter given in the Timken Spherical Roller Bearing
Catalog (order no. 10446), found on www.timken.com.
Place thumbs on the inner ring bore and oscillate the inner
ring the distance of two or three roller spacings.
Move the feeler gage carefully along the top roller between
the roller and outer ring raceway. Repeat this procedure
using thicker feeler gage blades until one is found that will
not go through.
If the outer ring is being pressed into the housing, the O.D.
Coat the shaft with a light machine oil to reduce the force
Note
Never attempt a press fit on a shaft by applying pressure
to the outer ring or a press fit in a housing by applying
pressure to the inner ring.
92
Contact angle
Combined load
Axial or
thrust load
+T
Bearing
A
Bearing
B
93
DB
Marked faces
of outer rings
together.
Clearance
between
inner-ring faces.
DF
Unmarked faces
of outer rings
together.
Inner-ring faces
clamped together.
These inner- and
outer-ring faces
are flush.
Clearance
between
outer-ring faces.
Inner- and
outer-ring faces
clamped together.
Faces flush
on both sides.
Before mounting
Mounting
Before
Mounted
Mounted
Before
mounting
Before
Mounting
Mounted
Mounted
94
Tandem mounting, DT
Other mountings
DT
One marked and
one unmarked
outer-ring face
together.
Inner- and
outer-ring faces
not flush
on either side.
Under axial
load equivalent to
twice the normal
preload. Innerand outer-ring
faces are flush
on both sides.
TU
TU
QU
QU
Before Mounting
Before
mounting
Mounted
Mounted
95
Setting
Timken has established standard preload levels that are
considered proper for most duplex bearing applications. Special
preloads also can be provided to satisfy extreme requirements.
For example, a heavily loaded, slow-speed rotating shaft may
require heavier-than-normal preload in order to minimize
deflection. Although heavy preload provides slightly greater
rigidity, it reduces bearing life and increases power consumption;
therefore, preload levels should be chosen with care.
The axial deflection of a bearing subject to thrust loading is based
on Hertzs theories for elastic bodies in contact. The general
expression is:
Fa2 1/3
=K
Zd2
( )
Deflection
Fitting Practice
B2
B1
C1
Fa1
Fa2
Load, Fa
+T
Bearing
A
96
C2
Bearing
B
Standard Class
ISO
P0
P6
Precision Class
P5
P4
P2
ABMA
ABEC 1
ABEC 3
ABEC 5
ABEC 7
ABEC 9
Mounting
Hs
Fixed mounting
Fig. 105.
Floating mounting
S
Shaft
Shoulder
Hs
Housing
Shoulder
0.25 mm
.010 in.
0.25 mm
.010 in.
mm
in.
mm
in.
9301K
14.7
0.58
21.6
0.85
9302K
17.8
0.70
25.4
1.00
9303K
19.8
0.78
27.4
1.08
9304K
23.9
0.94
33.5
1.32
9305K
29.0
1.14
38.6
1.52
9306K
33.5
1.32
43.4
1.71
9307K
39.6
1.56
50.8
2.00
9308K
45.0
1.77
57.4
2.26
9309K
50.3
1.98
63.2
2.49
9310K
54.9
2.16
67.6
2.66
9311K
61.0
2.40
74.7
2.94
9312K
65.8
2.59
79.8
3.14
Basic
Bearing
Number
97
Fig. 106.
98
Hs
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
33K3
5.1
0.20
4.8
0.19
8.1
0.32
7.9
0.31
33K4
6.1
0.24
5.8
0.23
11.2
0.44
10.9
0.43
33K5
6.6
0.26
6.4
0.25
11.2
0.44
10.9
0.43
34K
6.6
0.26
6.4
0.25
14.2
0.56
14.0
0.55
35K
9.4
0.37
9.1
0.36
17.0
0.67
16.8
0.66
36K
9.4
0.37
9.1
0.36
17.0
0.67
16.8
0.66
37K
11.2
0.44
10.7
0.42
20.1
0.79
19.6
0.77
38K
11.4
0.45
10.9
0.43
20.1
0.79
19.6
0.77
38KV
11.4
0.45
10.9
0.43
20.1
0.79
19.6
0.77
39K
13.0
0.51
12.5
0.49
23.1
0.91
22.6
0.89
S1K7
8.6
0.34
8.1
0.32
14.2
0.56
13.7
0.54
S1K
9.4
0.37
8.9
0.35
17.5
0.69
17.0
0.67
S3K
12.7
0.50
12.2
0.48
20.3
0.80
19.8
0.78
S5K
16.0
0.63
15.5
0.61
25.1
0.99
24.6
0.97
S7K
21.3
0.84
20.3
0.80
31.5
1.24
30.5
1.20
S8K
24.6
0.97
23.6
0.93
37.1
1.46
35.6
1.40
S9K
28.9
1.14
27.9
1.10
41.9
1.65
40.9
1.61
S10K
31.5
1.24
30.5
1.20
46.7
1.84
45.7
1.80
S11K
34.0
1.34
33.0
1.30
49.5
1.95
48.5
1.91
S12K
39.4
1.55
38.4
1.51
55.9
2.20
50.8
2.00
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
9100
13.2
0.52
11.9
0.47
24.1
0.95
23.1
0.91
9101
18.0
0.71
14.0
0.55
25.9
1.02
9102
19.0
0.75
17.0
0.67
9103
20.6
0.81
9104
Basic
Bearing
Number
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
200
14.2
0.56
12.7
0.50
24.9
0.98
24.6
0.97
24.6
0.97
201
16.3
0.64
14.7
0.58
26.9
1.06
30.0
1.18
28.7
1.13
202
19.0
0.75
17.5
0.69
19.0
0.75
33.0
1.30
31.8
1.25
203
21.3
0.84
24.9
0.98
22.6
0.89
37.1
1.46
35.8
1.41
204
9105
30.0
1.18
27.4
1.08
41.9
1.65
40.6
1.60
9106
35.1
1.38
34.0
1.34
49.0
1.93
9107
41.4
1.63
38.9
1.53
9108
46.0
1.81
9109
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
300
15.0
0.59
12.7
0.50
30.0
1.18
29.2
1.15
26.7
1.05
301
17.5
0.69
16.0
0.63
31.0
1.22
30.7
1.21
30.0
1.18
29.2
1.15
302
20.6
0.81
19.0
0.75
36.1
1.42
35.6
1.40
19.6
0.77
34.0
1.34
33.3
1.31
303
23.1
0.91
21.1
0.83
40.9
1.61
40.6
1.60
25.4
1.00
23.9
0.94
40.9
1.61
40.1
1.58
304
26.9
1.06
23.9
0.94
45.0
1.77
44.4
1.75
205
31.0
1.22
29.0
1.14
46.0
1.81
45.2
1.78
305
33.3
1.31
29.0
1.14
55.1
2.17
53.1
2.09
47.8
1.88
206
37.3
1.47
34.0
1.34
56.1
2.21
54.9
2.16
306
39.6
1.56
34.0
1.34
65.0
2.56
62.0
2.44
56.1
2.21
54.6
2.15
207
43.7
1.72
38.9
1.53
65.0
2.56
62.7
2.47
307
45.2
1.78
42.9
1.69
71.1
2.80
69.1
2.72
43.9
1.73
62.0
2.44
60.7
2.39
208
49.3
1.94
43.9
1.73
72.9
2.87
70.6
2.78
308
50.8
2.00
49.0
1.93
81.0
3.19
77.7
3.06
51.6
2.03
49.3
1.94
69.1
2.72
67.8
2.67
209
54.1
2.13
49.3
1.94
78.0
3.07
75.4
2.97
309
57.9
2.28
54.1
2.13
90.9
3.58
86.6
3.41
9110
56.4
2.22
54.1
2.13
73.9
2.91
72.6
2.86
210
59.4
2.34
54.1
2.13
83.1
3.27
80.5
3.17
310
63.5
2.50
59.9
2.36
100.1
3.94
95.2
3.75
9111
63.0
2.48
59.2
2.33
83.1
3.27
81.8
3.22
211
64.5
2.54
61.2
2.41
93.5
3.68
90.4
3.56
311
69.8
2.75
65.0
2.56
110.0
4.33
104.9
4.13
9112
67.8
2.67
64.3
2.53
88.1
3.47
86.9
3.42
212
71.4
2.81
67.8
2.67
101.1
3.98
98.3
3.87
312
74.7
2.94
72.1
2.84
118.1
4.65
112.8
4.44
9113
72.1
2.84
69.1
2.72
93.0
3.66
81.7
3.61
213
77.0
3.03
72.6
2.86
111.0
4.37
106.4
4.19
313
81.0
3.19
77.0
3.03
128.0
5.04
122.2
4.81
9114
79.0
3.11
73.9
2.91
103.1
4.06
100.8
3.97
214
81.8
3.22
77.7
3.06
116.1
4.57
112.0
4.41
314
87.4
3.44
82.0
3.23
137.9
5.43
130.3
5.13
9115
84.1
3.31
79.0
3.11
108.0
4.25
105.7
4.16
215
87.4
3.44
82.6
3.25
120.9
4.76
116.6
4.59
315
98.6
3.88
87.1
3.43
148.1
5.83
139.7
5.50
9116
90.4
3.56
84.1
3.31
118.1
4.65
114.3
4.50
216
93.7
3.69
90.2
3.55
130.0
5.12
125.2
4.93
316
100.1
3.94
91.9
3.62
158
6.22
149.4
5.88
9117
95.2
3.75
88.9
3.50
122.9
4.84
119.6
4.71
217
98.6
3.88
95.2
3.75
140.0
5.51
134.9
5.31
317
104.9
4.13
99.1
3.90
166.1
6.54
157.2
6.19
9118
102.4
4.03
97.5
3.84
131.1
5.16
130.3
5.13
218
105.7
4.16
100.1
3.94
150.1
5.91
142.7
5.62
318
111.3
4.38
103.9
4.09
176.0
6.93
165.1
6.50
9120
111.3
4.38
107.4
4.23
141.0
5.55
138.2
5.44
219
111.3
4.38
106.9
4.21
158.0
6.22
153.9
6.06
319
117.6
4.63
109.0
4.29
185.9
7.32
174.8
6.88
9121
118.4
4.66
115.1
4.53
150.1
5.91
146.0
5.75
220
117.6
4.63
112.0
4.41
167.9
6.61
160.3
6.31
320
124.0
4.88
114.0
4.49
200.9
7.91
187.4
7.38
9122
124.7
4.91
119.9
4.72
160.0
6.30
157.0
6.18
221
124.0
4.88
117.1
4.61
178.1
7.01
174.8
6.88
321
130.3
5.13
119.1
4.69
211.1
8.31
196.8
7.75
99
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
9124
134.1
5.28
130.0
5.12
169.9
6.69
165.1
6.50
9126
147.6
5.81
140.0
5.51
190.0
7.48
9128
153.9
6.06
147.6
5.81
9130
167.4
6.59
9132
Basic
Bearing
Number
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
222
130.3
5.13
121.9
4.80
188.0
7.40
179.3
7.06
184.1
7.25
224
143.0
5.63
132.1
5.20
202.9
7.99
200.2
7.88
195.1
7.68
226
152.4
6.00
144.0
5.67
162.1
6.38
213.1
8.39
206.5
8.13
228
165.1
6.50
176.8
6.96
166.6
6.56
228.6
9.00
222.2
8.75
230
9134
192.0
7.56
182.1
7.17
247.9
9.76
239.8
9.44
9138
212.9
8.38
201.9
7.95
278.1
10.95
9140
224.5
8.84
212.1
8.35
9144
246.4
9.70
9148
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
322
139.7
5.50
124.0
4.88
226.1
8.90
209.6
8.25
192.0
7.56
324
152.4
6.00
134.1
5.28
246.1
9.69
226.8
8.93
215.9
8.50
206.5
8.13
326
163.6
6.44
148.1
5.83
262.1
10.32
246.1
9.69
153.9
6.06
236.0
9.29
223.8
8.81
328
176.0
6.93
158.0
6.22
281.9
11.10
263.7
10.38
177.0
6.97
164.1
6.46
256.0
10.08
241.3
9.50
330
189.0
7.44
167.9
6.61
302.0
11.89
280.9
11.06
232
186.9
7.36
174.0
6.85
276.1
10.87
260.4
10.25
332
188.0
7.84
178.0
7.01
322.1
12.68
294.1
11.58
266.7
10.5
234
202.7
7.98
188.0
7.40
292.1
11.50
276.4
10.88
334
213.4
8.40
188.0
7.40
342.1
13.47
311.7
12.27
297.9
11.73
285.0
11.22
236
212.9
8.38
198.1
7.80
302.0
11.89
281.7
11.09
336
223.5
8.80
198.1
7.80
362.0
14.25
331.5
13.05
233.9
9.21
326.1
12.84
310.9
12.24
238
222.8
8.77
208.0
8.19
322.1
12.68
301.8
11.88
338
237.5
9.35
212.1
8.35
378.2
14.89
345.2
13.59
266.7
10.50
254.0
10.00
345.9
13.62
330.7
13.02
240
239.3
9.42
217.9
8.58
342.1
13.47
319.3
12.57
340
249.9
9.84
222.0
8.74
398.0
15.67
365.0
14.37
9152
291.8
1 1.49
278.1
10.95
382.0
15.04
366.8
14.44
242
246.1
9.69
225.3
8.87
362.2
14.26
336.8
13.26
342
260.1
10.24
232.2
9.14
418.3
16.47
385.3
15.17
9156
313.2
12.33
297.9
11.73
402.1
15.83
386.8
15.23
244
257.6
10.14
238.0
9.37
382.0
15.04
356.6
14.04
344
272.5
10.73
242.1
9.53
437.9
17.24
405.4
15.96
9160
339.3
1 3.36
318.0
12.52
442.0
17.40
421.6
16.60
246
268.7
10.58
247.9
9.76
402.1
15.83
370.8
14.60
348
292.6
11.52
262.1
10.32
478.0
18.82
439.9
17.32
9164
360.4
14.19
338.1
13.31
462.0
18.19
441.7
17.39
248
283.5
11.16
258.1
10.16
421.9
16.61
385.6
15.18
352
318.5
12.54
288.0
11.34
512.1
20.16
474.0
18.66
9180
457.2
18.00
431.8
17.00
561.8
22.12
549.1
21.62
250
293.4
11.55
268.0
10.55
442.0
17.40
398.8
15.70
356
341.1
13.43
308.1
12.13
551.9
21.73
511.3
20.13
100
Hs
NON-STANDARD EXTRA-LARGE
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
7405
37.3
1.47
34.0
1.34
71.1
2.80
66.8
2.63
7406
43.7
1.72
39.1
1.54
81.0
3.19
7407
49.0
1.93
43.9
1.73
7408
55.6
2.19
7409
Basic
Bearing
Number
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
120W2
117.6
4.63
111.8
4.40
150.1
5.91
146
5.75
76.2
3.00
122W
124.7
4.91
120.1
4.73
162.8
6.41
158.8
6.25
90.9
3.58
85.9
3.38
124W
134.1
5.28
130.0
5.12
178.1
7.01
174.5
6.87
50.0
1.97
100.1
3.94
93.7
3.69
126W
147.8
5.82
139.7
5.50
193.0
7.60
185.7
7.31
62.0
2.44
55.1
2.17
110.0
4.33
101.6
4.00
128W
157.2
6.19
150.1
5.91
207.8
8.18
202.2
7.96
7410
68.3
2.69
62.0
2.44
118.1
4.65
111.3
4.38
130W
167.4
6.59
162.1
6.38
223.0
8.78
216.2
8.51
7411
74.4
2.93
67.1
2.64
128.0
5.04
120.7
4.75
132W
189.0
7.44
174.0
6.85
234.7
9.24
223.8
8.81
7412
81.0
3.19
72.1
2.84
137.9
5.43
130.3
5.13
134W
191.0
7.52
185.2
7.29
249.7
9.83
244.1
9.61
7413
88.9
3.50
77.0
3.03
148.1
5.83
139.7
5.50
136W
203.2
8.00
195.3
7.69
264.7
10.42
257.8
10.15
7414
93.7
3.69
84.1
3.31
166.1
6.54
155.7
6.13
138W
214.4
8.44
205.2
8.08
284.7
11.21
276.1
10.87
7415
99.8
3.93
88.9
3.50
176.0
6.93
163.6
6.44
224W
143.0
5.63
132.1
5.20
203.2
8.00
192
7.56
7416
104.9
4.13
94.0
3.70
185.9
7.32
173.0
6.81
226
152.4
6.00
144.0
5.67
215.9
8.50
206.5
8.13
7418
119.1
4.69
108.0
4.25
207.0
8.15
196.9
7.75
228
165.1
6.50
153.9
6.06
236.0
9.29
223.8
8.81
7420
131.3
5.17
119.9
4.72
233.9
9.21
223.3
8.79
276-2
401.8
15.82
400.1
15.75
463.6
18.25
461.5
18.17
101
Housing shoulder diameters of bearings with Mechani-Seals differ slightly from those of
other types to allow for clearance between the external rotating member of the seal and
the housing shoulder.
Hs
Housing Shoulder
Hs
Diameter
Max.
Min.
mm
in.
mm
in.
36
17.0
0.67
16.8
0.66
36V
17.0
0.67
37
Basic
Bearing
Number
Housing Shoulder
Hs
Diameter
Max.
Min.
mm
in.
mm
in.
202-3
32.5
1.28
31.0
1.22
16.8
0.66
202-4
32.5
1.28
31.0
1.22
20.1
0.79
19.6
0.77
203
36.6
1.44
35.8
1.41
37V
20.1
0.79
19.6
0.77
204
43.7
1.72
41.1
1.62
34
20.1
0.79
19.6
0.77
204-2
43.7
1.72
41.1
1.62
38V
20.1
0.79
19.6
0.77
205
48.5
1.91
46.7
1.84
39
23.1
0.91
22.6
0.89
205-2
48.5
1.91
46.7
1.84
39V
23.1
0.91
22.6
0.89
206
57.9
2.28
56.4
2.22
200
27.7
1.09
26.2
1.03
207
67.6
2.66
64.3
2.53
201
29.5
1.16
27.7
1.09
208
75.4
2.97
71.4
2.81
20-2
29.5
1.16
27.7
1.09
209
80.3
3.16
77.0
3.03
201-3
29.5
1.16
27.7
1.09
209-2
80.3
3.16
77.0
3.03
202
32.5
1.28
31.0
1.22
211
93.7
3.69
90.4
3.56
202-2
32.5
1.28
31.0
1.22
102
Hs
KRR
Type
G-KRR
Type
RA-RR
Type
GRA-RR
Type
GYA-RR(1)
Type
Shaft
Size
Basic
Outer
Ring
Size
Stationary Housing
D
Housing Bore
Shoulder Diameter
Mean Fit
Hs
Min.
Max.
Loose
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
203
40.000
1.5748
40.015
1.5754
0.013
0.0005
34.8
1.37
34.0
1.34
204
47.000
1.8504
47.015
1.8510
0.013
0.0005
40.9
1.61
40.6
1.60
205
51.999
2.0472
52.017
2.0479
0.015
0.0006
46.0
1.81
45.7
1.80
206
61.999
2.4409
62.017
2.4416
0.015
0.0006
56.1
2.21
54.9
2.16
207
71.999
2.8346
72.017
2.8353
0.015
0.0006
56.1
2.56
54.9
2.47
208
80.000
3.1496
80.018
3.1503
0.020
0.0006
78.0
2.87
75.4
2.78
209
85.001
3.3465
85.024
3.3474
0.020
0.0008
78.0
3.07
75.4
2.97
210
90.000
3.5433
90.023
3.5442
0.020
0.0008
83.1
3.27
81.0
3.19
211
100.000
3.9370
100.023
3.9379
0.020
0.0008
90.9
3.58
90.4
3.56
mm
in.
E17KRR
1008KRR
1010KRR(KR)
1011KRR
GE17KRR
G1010KRR
G1011KRR
RAE17RR
RA008RR
RA009RR
RA010RR
GRAE17RR
GRA008RR
GRA009RR
GRA010RR
GYAE17RR
GYA0008RR
GYA009RR
GYA010RR
5/8
11/16
E20KRR
1012KRR(KR)
GE20KRR
G1012KRR
RAE20RR
RA012RR
GRAE20RR
GRA012RR
GYAE20RR
GYA012RR
3/4
E25KRR
1013KRR
1014KRR
1015KRR(KR)
1100KRR(KR)
GE25KRR
G1014KRR
G1015KRR
G1100KRR
RAE25RR
RA013RR
RA014RR
RA015RR
RA100RR
GRAE25RR
GRA013RR
GRA014RR
GRA015RR
GRA100RR
GYAE25RR
GYA013RR
GYA014RR
GYA015RR
GYA100RR
E30KRR
1102KRR(KR)
1103KRR(KR)
GE30KRR
G1101KRR
G1102KRR
G1103KRR
RAE30RR
RA101RR
RA102RR
RA103RR
GRAE30RR
GRA101RR
GRA102RR
GRA103RR
GYAE30RR
GYA101RR
GYA102RR
GYA103RR
GYA103RR2
30
1 1/16
1 1/8
1 3/16
1 1/4
E35KRR
1104KRR(KR)
1105KRR
1106KRR
1107KRR(KR)
GE35KRR
G1104KRR
G1106KRR
G1107KR
RAE35RR
RA104RR
RA105RR
RA106RR
RRA107RR
GRAE35RR
GRA104RR
GRA105RR
GRA106RR
GRA107RR
GYAE35RR
GYA104RR
GYA105RR
GYA106RR
GYA107RR
35
1 1/4
1 5/16
1 3/8
1 7/16
1108KRR(KR)
G1108KRR
RA108RR
RA106RR
GRAE40RR
GRA108RR
GRA109RR
GYAE40RR
GYA108RR
GYA109RR
40
1 1/2
1 9/16
E45KRR
1110KRR
1111KRR(KR)
1112KRR(KR)
G1110KRR
G1111KRR
G1112KRR
RA110RR
RA111RR
RA112RR
GRAE45RR
GRA110RR
GRA111RR
GRA112RR
GYAE45RR
GYA110RR
GYA111RR
GYA112RR
45
1 5/8
1 11/16
1 34
E50KRR
1114KRR
1115KRR(KR)
GE50KRR
G1115KRR
RAE50RR
RA113RR
RA114RR
RA115RR
GRAE50RR
GRA113RR
GRA114RR
GRA115RR
GRA115RR2
GYAE50RR
GYA113RR
GYA114RR
GYA115RR
50
1 13/16
1 7/8
1 15/16
2
E55KRR
1200KRR(KR)
1202KRR
1203KRR(KR)
GE55KRR
G1200KRR
G1203KRR
RAE55RR
RA200RR
RA201RR
RA202RR
RA203RR
GRAE55RR
GRA200RR
GRA201RR
GRA202RR
GRA203RR
GYAE55RR
GYA200RR
GYA201RR
GYA202RR
GYA203RR
55
2
2 1/16
2 1/8
2 3/16
E60KRR
1204KRR
1207KRR(KR)
GE60KRR
G1207KRR
60
2 1/4
2 7/16
212
110.000
4.3307
110.02
4.3316
0.020
0.0008
101.1
3.98
98.3
3.87
75
2 15/16
215
130.000
5.1181
130.025
5.1191
0.023
0.0009
120.9
4.76
116.6
4.59
E75KRR
1215KRR
17
1/2
9/16
20
25
13/16
7/8
15/16
103
Fitting Practice
Tables 68 and 69 on page 131 provide guidelines for shaft and
housing fits related to particular operating conditions for ISO
P0 (ABEC 1) and ISO P6 (ABEC 3) radial ball bearings. Shaft and
housing tolerance guidelines are shown on pages 132-145.
SETTING
Correct bearing mounting and fitting practices are key
components of proper bearing setting. Setting is the amount of
clearance or interference within a mounted bearing. Bearing
internal clearance is affected by the tightness of the fit to the
inner and outer rings. Proper bearing setting is crucial to bearing
life and performance. Application-dependant factors such as
load, speed, bearing position, installation method, materials of
construction, runout accuracy, thermal considerations, hoop
stress, shaft design and housing design can affect internal
clearance and should be taken into account when determining
the bench setting. This section provides tables and discussion
to aid in selection of the proper bearing mounting and fitting
procedures to optimize performance in general applications.
For special applications, please consult your Timken engineer
for review.
Bearing
Industry
Number
Designation
Prefix
104
JJ
Applied load
When the inner and outer ring raceway curvatures are accurately
known, the free endplay can readily be calculated from the values
of no load radial clearance by the following formula:
E =
4d[RIC](KO + Ki - 1) - RIC2 or
4d[RIC](KO + Ki - 1)
E
= sin-1
2 (Ko + Ki - 1)d
105
Table 51. Radial Ball Bearings Radial Internal Clearance acceptance Limits(1)
Timken Prefix (Industry Designation)
Basic
Bore Diameter
Over
Incl.
H(C2)
Max.
mm
in.
R(C0)
Min.
Max.
mm
in.
P(C3)
Min.
Max.
mm
in.
J(C4)
Min.
Max.
mm
in.
JJ(C5)
Min.
Max.
mm
in.
Min.
mm
in.
2.5000
0.0984
10.000
0.3937
0.007
0.0003
0.000
0.0000
0.013
0.0005
0.002
0.0001
0.023
0.0009
0.008
0.0003
0.029
0.0011
0.014
0.0006
0.037
0.0015
0.020
0.0008
10.000
0.3937
18.000
0.7087
0.009
0.00035
0.000
0.0000
0.018
0.0007
0.003
0.0001
0.025
0.001
0.011
0.0004
0.033
0.0013
0.018
0.0007
0.045
0.0018
0.025
0.0010
18.000
0.7087
24.000
0.9449
0.010
0.0004
0.000
0.0000
0.020
0.0008
0.005
0.0002
0.028
0.0011
0.013
0.0005
0.036
0.0014
0.020
0.0008
0.048
0.0019
0.028
0.0011
24.000
0.9449
30.000
1.811
0.011
0.00045
0.001
0.0001
0.020
0.0008
0.005
0.0002
0.028
0.0011
0.013
0.0005
0.041
0.0016
0.023
0.0009
0.053
0.0021
0.030
0.0012
30.000
1.811
40.000
1.5748
0.011
0.00045
0.001
0.0001
0.020
0.0008
0.006
0.0002
0.033
0.0013
0.015
0.0006
0.046
0.0018
0.028
0.0011
0.064
0.0025
0.040
0.0016
40.000
1.5748
50.000
1.9685
0.011
0.00045
0.001
0.0001
0.023
0.0009
0.006
0.00025
0.036
0.0014
0.018
0.0007
0.051
0.0020
0.030
0.0012
0.073
0.0029
0.045
0.0018
50.000
1.9685
65.000
2.5591
0.015
0.0006
0.001
0.0001
0.028
0.0011
0.008
0.00035
0.043
0.0017
0.023
0.0009
0.061
0.0024
0.038
0.0015
0.090
0.0035
0.055
0.0022
65.000
2.5591
80.000
3.1496
0.015
0.0006
0.001
0.0001
0.030
0.0012
0.010
0.0004
0.051
0.0020
0.025
0.0010
0.071
0.0028
0.046
0.0018
0.105
0.0041
0.065
0.0026
80.000
3.1496
100.000
3.9370
0.018
0.0007
0.001
0.0001
0.036
0.0014
0.012
0.00045
0.058
0.0023
0.030
0.0012
0.084
0.0033
0.053
0.0021
0.120
0.0047
0.075
0.0030
100.000
3.9370
120.000
4.7244
0.020
0.0008
0.002
0.0001
0.041
0.0016
0.015
0.0006
0.066
0.0026
0.036
0.0014
0.097
0.0038
0.061
0.0024
0.140
0.0055
0.090
0.0035
120.000
4.7244
140.000
5.5118
0.023
0.0009
0.002
0.0001
0.048
0.0019
0.018
0.0007
0.081
0.0032
0.041
0.0016
0.114
0.0045
0.071
0.0028
0.160
0.0063
0.105
0.0041
140.000
5.5118
160.000
6.2992
0.023
0.0009
0.002
0.0001
0.053
0.0021
0.018
0.0007
0.091
0.0036
0.046
0.0018
0.130
0.0051
0.081
0.0032
0.180
0.0071
0.120
0.0047
160.000
6.2992
180.000
7.0886
0.025
0.0010
0.002
0.0001
0.061
0.0024
0.020
0.0008
0.102
0.0040
0.053
0.0021
0.147
0.0058
0.091
0.0036
0.200
0.0079
0.135
0.0053
180.000
7.0886
200.000
7.8740
0.030
0.0012
0.002
0.0001
0.071
0.0028
0.025
0.0010
0.117
0.0046
0.063
0.0025
0.163
0.0064
0.107
0.0042
0.230
0.0091
0.150
0.0059
200.000
7.8740
240.000
9.4488
0.036
0.0014
0.003
0.0001
0.081
0.0032
0.030
0.0012
0.137
0.0054
0.074
0.0029
0.193
0.0076
0.127
0.0050
0.267
0.0105
0.183
0.0072
240.000
9.4488
280.000
11.0236
0.041
0.0016
0.003
0.0001
0.097
0.0038
0.033
0.0013
0.157
0.0062
0.086
0.0034
0.224
0.0088
0.147
0.0058
0.310
0.0122
0.213
0.0084
280.000
11.0236
320.000
12.5984
0.048
0.0019
0.005
0.0002
0.114
0.0045
0.041
0.0016
0.180
0.0071
0.104
0.0041
0.257
0.0101
0.170
0.0067
0.353
0.0139
0.246
0.0097
320.000
12.5984
370.000
14.5669
0.053
0.0021
0.005
0.0002
0.127
0.0050
0.046
0.0018
0.208
0.0082
0.117
0.0046
0.295
0.0116
0.198
0.0078
0.409
0.0161
0.284
0.0112
370.000
14.5669
430.000
26.9291
0.064
0.0025
0.008
0.0003
0.147
0.0058
0.056
0.0022
0.241
0.0095
0.137
0.0054
0.340
0.0134
0.231
0.0091
0.475
0.0187
0.330
0.013
430.000
26.9291
500.000
19.6850
0.074
0.0029
0.010
0.0004
0.170
0.0067
0.066
0.0026
0.279
0.0110
0.160
0.0063
0.396
0.0156
0.269
0.0106
0.551
0.0217
0.386
0.0152
500.000
19.6850
570.000
22.4409
0.081
0.0032
0.010
0.0004
0.193
0.0076
0.074
0.0029
0.318
0.0125
0.183
0.0072
0.450
0.0177
0.307
0.0121
0.630
0.0248
0.439
0.0173
570.000
22.4409
640.000
25.1969
0.091
0.0036
0.013
0.0005
0.216
0.0085
0.085
0.0033
0.356
0.0140
0.206
0.0081
0.505
0.0199
0.345
0.0136
0.706
0.0278
0.495
0.0195
640.000
25.1969
710.000
27.9528
0.114
0.0045
0.020
0.0008
0.239
0.0094
0.107
0.0042
0.394
0.0155
0.229
0.0090
0.564
0.0222
0.384
0.0151
0.780
0.0307
0.554
0.0218
710.000
27.9528
800.000
31.4961
0.211
0.0083
0.028
0.0011
0.353
0.0139
0.201
0.0079
0.587
0.0231
0.345
0.0136
0.833
0.0328
0.577
0.0227
1.148
0.0452
0.823
0.0324
800.000
31.4961
1060.000
41.7323
0.211
0.0083
0.028
0.0011
0.353
0.0139
0.201
0.0079
0.587
0.0231
0.345
0.0136
0.833
0.0328
0.577
0.0227
1.148
0.0452
0.823
0.0324
(1)Standard RIC values for Timken radial ball bearings are R(C0) and P(C3). For bearing O.D. greater than 52 mm (2.0472 in.), P(C3) is recommended.
106
Precision Bearings
Mounting
Machine tools are a common application for precision bearings
and are provided as typical examples in the following discussions.
Common terminology within the machine tool industry is to refer to
the shaft as the spindle. In keeping with this industry preference,
the term spindle is used in the Precision BearingS section of
this manual.
Obtaining good spindle accuracy depends not only on selecting
the proper precision bearings but also on the following factors:
Housing design
Housings are usually made of cast iron or steel and are generally
heat-treated to lessen possible distortion. For smaller, high-speed
applications, steel housings are preferred.
Housing seals
A labyrinth combination of flinger and end cover provides a highly
effective seal against the intrusion of foreign matter. This seal
is suggested for use over a wide range of speeds. For slowerspeed applications, a combination of flinger and a commercial
contact-type seal is usually employed.
Flingers should be machined all over to assure true running.
Their diameters should be concentric with the bore. The outside
diameter of the flinger is often tapered to throw off cutting
compounds, coolants, etc., from the point at which such liquids
may enter the spindle. A drip or run-off groove adjacent to the
open lip of the end cover is desirable and practical.
The axial clearances of the internal faces between flinger and
end cover should be about 1.600 mm (0.0629 in.). The first radial
clearance opening on any design through which liquid may pass
should be made very close, about 0.089 mm (0.0035 in.) per side. The
inner radial clearances should be between 0.380 mm (0.0149 in.) and
0.190 mm (0.0075 in.).
107
(a)
(c)
2 spacers
Fig. 111.
Locking devices.
2 screws
spaced
180 apart
Shafts
Shafts are preferably made from hardened and ground steel;
and, where suitable, a hardness of 45-50 HRC is recommended. If
possible, bearing backing shoulders and seats should be ground in
one operation. This promotes true balance and running accuracy,
which are critical in high-speed applications. Suggested shaft
geometry can be found on page 119.
Locking devices
In most cases, simple 2TS(F) spindle layouts are adjusted by
correct positioning of the rear bearing inner ring. A commonly
used device is a precision adjusting nut. A locking device must
be provided to properly maintain the nut after setting: either
axially by means of two screws 180 degrees opposite pinching
the threads (fig. 111a), or radially by pressure of a screw on a soft
metal shoe (fig. 111b).
For improved accuracy, a ground spacer in conjunction with a
square-ground spindle shoulder and a locking precision nut also
can be used (fig. 112). Good parallelism of the ground-spacer
faces as well as the squareness of the spindle shoulder will
ensure final position of the nut abutment face is tightly controlled
resulting in proper position of the inner ring backface. This
mounting configuration also offers assurance that the initially
defined setting cannot be modified by the final user. Fig. 111c
shows two different solutions with ground spacers. Note the
practicality of the above centerline solution, which allows the
spacer to both increase or decrease the initial setting.
A well-known method of providing good spindle alignment,
roundness and backing squareness is to grind the inner ring seats
and the backing shoulders during the same operation (fig. 113).
In this method, the grinding of the adjusting nut (if any) abutment
face also can be achieved by locking the nut on its thread. This
eliminates possible misalignment of the nut due to internal thread
clearance.
108
Cone seat
Spacer
Spindle shoulder
Fig. 112. Using ground spacer and spindle shoulder together with
a precision nut for improved accuracy.
Grinding
wheel
Simple mounting
Fig. 114 shows the box-type mounting using three bearings. The
two nose bearings are located axially (fixed position) and accept
axial forces in both directions, while the rear bearing is fitted in
a floating position to accommodate the thermal expansion of
the spindle. The floating position can be supported either by a
tapered roller bearing or a cylindrical roller bearing.
Rear
Nose
109
Nut
Spacer
Rear
Fig. 116. Simple paired TS mounting with oil inlet at the small
end of the rollers.
110
2.5 to 3 times d
(theoretical)
Nose
d
Fig. 117. Simple paired TS mounting with oil jets at both ends of
the rollers for inlet and cooling.
Fig. 120 shows the same arrangement with a TSMA bearing. This
arrangement allows the widest range of operating speeds, under
optimum preload.
Pressure control
Pressure control
111
The bore of the housing (DH) and the diameter of the spigot (DS)
(fig. 122) should be machined to give a mean of the suggested
interference fits (pages 170-171).
The bearing is adjusted externally by segments beneath the top
inner-ring clamping plate (fig. 122) to get the required preload.
Your Timken engineer should be consulted for more details about
the use of crossed roller bearings.
DH
DS
112
Tandem mounting, DT
DT
One marked and
one unmarked
outer-ring face
together.
DB
Marked faces
of outer rings
together.
Inner-ring faces
clamped together.
These inner- and
outer-ring faces
are flush.
Clearance
between
inner-ring faces.
Under axial
load equivalent to
twice the normal
preload. Innerand outer-ring
faces are flush
on both sides.
Inner- and
outer-ring faces
not flush
on either side.
Before
mounting
Before Mounting
Mounted
Mounted
Before
Before mounting
Mounting
Mounted
Mounted
Other mountings
Flush-ground (DU) pairs may be mounted in combination with a
single flush-ground bearing as a triplex (TU) set shown below.
Also shown below is a quadruplex (QU) set where three bearings
in tandem are mounted back-to-back with a single bearing.
These arrangements provide high capacity in one direction and
also a positively rigid mounting capable of carrying a moderate
amount of reverse thrust.
DF
Unmarked faces
of outer rings
together.
TU
TU
Clearance
between
outer-ring faces.
Inner- and
outer-ring faces
clamped together.
Faces flush
on both sides.
QU
QU
Before
mounting
Before Mounting
Mounted
Mounted
113
114
Face-to-face
mounting
Back-to-back
mounting
Two
back-to-back
pairs
Two
face-to-face
pairs
Two
tandem pairs
mounted db
MOUNTING DESIGN,
MOUNTING
FITTING PRACTICE
DESIGN, FITTING PRACTICE, setting and installation
PRECISION Bearings Spring-loaded
Precision bearings
Spring-loaded mountings
For high-speed applications such as machine tools, radial and
axial rigidity and smooth spindle performance may be obtained
by spring loading the ball bearings with a predetermined
axial load. Spring loading allows the spindle to float laterally
during temperature changes without appreciably increasing or
decreasing the original spring axial load.
As the inner ring heats up during operation, it expands radially.
This radial expansion applies an increasing load through the
rolling elements and outer ring and finally to the preload springs.
The preload springs deflect slightly to compensate for the loads
due to thermal expansion and maintain a consistent load on the
spindle system.
In some applications, single spring-loaded bearings are employed
at the front and rear locations, mounted in back-to-back
arrangement. Other mountings, similarly spring-loaded, have a
pair of bearings installed in tandem at each end of the spindle
in back-to-back arrangement (DT-DB). In either case, the spring
pressure is applied to the pulley-end or rear bearing position,
placing the shaft in tension between the two bearing locations.
6
q
6
q Incorrect: bearing having largest runout at rear.
High points of runout not in line.
6
q Incorrect: bearing having largest runout at nose.
High points of runout in line.
6
q Incorrect: bearing having largest runout at nose.
High points of runout not in line.
115
Fitting Practices
General guidelines for tapered roller bearings
Non-ferrous housings
116
Perpendicularity (squareness) of each shoulder to its corresponding bearing seat, or as a more practical measure,
perpendicularity of each shoulder to the spindle or housing
centerline established from the two bearing seats.
AA
00
000
m
in
m
in
m
in
m
in
Shaft - Ra
0.8
32
0.6
24
0.4
16
0.2
8
Housing - Ra
1.6
63
0.8
32
0.6
24
0.4
16
117
Ball bearings
Housing fits
Shaft fits
Shaft Diameter
Max
Min.
Max.
Min.
Loose
Tight
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
55.000
2.1654
54.994
2.1651
55.000
2.1654
54.994
2.1651
0.004
0.0002
0.006
0.0003
Housing Bore
Resulting
Mounting Fit
Average Fit
Max
Min.
Max.
Min.
Loose
Tight
Loose
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
90.000
3.5433
89.992
3.5430
90.008
3.5436
90.000
3.5433
0.015
0.0006
0.000
0.0000
0.008
0.0003
118
t3 B
t3 A
A
B
Ra
t2
t2
Ra
t1
t1
t4 A
Shaft tolerances
Tolerance
Value
MV
ABEC 7 (ISO P4)
MMV/MM
ABEC 7/9 (ISO P4S)
MMX
ABEC 9 (ISO P2)
t1
IT2
IT1
IT0
t2
IT2
IT1
IT0
Squareness
t3
IT2
IT1
IT0
Concentricity
t4
IT3
IT2
IT2
16 (in.) or 0.4 m
16 (in.) or 0.4 m
16 (in.) or 0.4 m
Description
Symbol
Roundness
//
Parallelism
Surface Finish
Ra
Shaft Journal
Diameter
dso
mm
Shaft Journal
Diameter
dso
mm
>
IT0
IT1
IT2
IT3
>
IT0
IT1
IT2
IT3
10
0.6
1.0
1.5
2.5
10
20
40
60
100
10
18
0.8
1.2
2.0
3.0
10
18
30
50
80
120
18
30
1.0
1.5
2.5
4.0
18
30
40
60
100
160
30
50
1.0
1.5
2.5
4.0
30
50
40
60
100
160
50
80
1.2
2.0
3.0
5.0
50
80
50
80
120
200
80
120
1.5
2.5
4.0
6.0
80
120
60
100
160
240
120
180
2.0
3.5
5.0
8.0
120
180
80
140
200
310
180
250
3.0
4.5
7.0
10.0
180
250
120
180
280
390
250
315
6.0
8.0
12.0
250
315
240
310
470
119
t2
t3
t2
t3
D
Ra
Ra
t1
t1
t4 A
Housing tolerances
Tolerance
Value
MV
ABEC 7 (ISO P4)
MMV/MM
ABEC 7/9 (ISO P4S)
MMX
ABEC 9 (ISOP2)
Roundness
t1
IT2
IT1
IT0
Parallelism
t2
IT2
IT1
IT0
Squareness
t3
IT2
IT1
IT0
Concentricity
t4
IT3
IT2
IT2
16 (in.) or 0.4 m
16 (in.) or 0.4 m
16 (in.) or 0.4 m
Description
Symbol
Surface Finish
Ra
Housing Journal
Diameter
D
mm
Housing Journal
Diameter
D
mm
>
IT0
IT1
IT2
IT3
>
IT0
IT1
IT2
IT3
10
18
0.8
1.2
2.0
3.0
10
18
30
50
80
120
18
30
1.0
1.5
2.5
4.0
18
30
40
60
100
160
30
50
1.0
1.5
2.5
4.0
30
50
40
60
100
160
50
80
1.2
2.0
3.0
5.0
50
80
50
80
120
200
80
120
1.5
2.5
4.0
6.0
80
120
60
100
160
240
120
180
2.0
3.5
5.0
8.0
120
180
80
140
200
310
180
250
3.0
4.5
7.0
10.0
180
250
120
180
280
390
250
315
3.5
6.0
8.0
12.0
250
315
140
240
310
470
315
400
4.5
6.0
8.0
12.0
315
400
180
240
310
470
120
Rotating speed.
Applied loads.
Bearing configuration and spread.
Lubrication type and flow.
External heat sources.
Many of these parameters directly and interactively affect
operating temperature which, in turn, affects bearing setting.
If possible, it is best to evaluate these effects by conducting
lab tests on the application. Temperature readings at various
locations can confirm or provide additional input for the analysis
tools.
A temperature gradient typically exists across the bearing due
to the fact that the inner ring generates more heat than the outer
ring. The inner and outer ring temperatures are transmitted to
the shaft and housing. The temperature gradient between the
shaft and the housing is typically 2 C to 5 C (4 F to 9 F). It is
valid for any type of bearing and has a direct influence on the
bearing setting.
The use of tapered roller bearings allows the radial loss of endplay
due to the gradient between the spindle and the housing to be
compensated by the axial expansion of the spindle with respect
to the housing through optimization of the bearing spread.
While temperature effects on setting are important, it also is
necessary to consider the effects of bearing configuration and
spread on operating setting. Steps can be taken to optimize the
design so that the setting change is minimal during operation. Fig.
133 shows a graphical representation of optimum spread.
[( ) ( ) ( ) ( ) ]
K1
0.39
Do1 +
2
K2
0.39
Do2 - L
2
121
during the starting period, care must be taken because the radial
thermal expansion is not immediately compensated by the axial
expansion of the spindle. That occurs later. During this transient
period, a decrease of the axial endplay or an increase of preload
is generally recorded (fig. 136). The loss of endplay can be
calculated by using the same formula on page 121, but ignoring
the parameter L. For this reason, it is generally recommended to
initially set the bearings with a light, cold endplay to avoid any
bearing burn-up, due to excessive preload during the transient
a
a
a
b
b
b
b
b
0
0
Temperature
Temperature
a
Temperature
Axial endplay
Axial
Axial
endplay
endplay
a
a
b
b
Time
Time
Time
a
0
0
b
0
122
Time
Time
Time
b
b
a
a
Axial Load
A
B
C
D
No Preload
Light Preload
Medium Preload
Heavy Preload
Ball bearings
A
B
Radial Load
C
D
No Preload
Light Preload
Medium Preload
Heavy Preload
123
Examples
Shaft Diameter
Tolerance Symbol(1)
Remarks
mm
in.
Stationary
inner ring load
0.25C
See table 57
for shaft size
All diameters
s4
g6
h6
over
incl.
18
0.7087
100
3.9370
100
3.9370
200
7.8740
m6
18
0.7087
65
2.5590
m5
65
2.5590
100
3.9370
m6
100
3.9370
140
5.5118
n6
140
5.5118
280
11.0236
p6
280
11.0236
500
19.6850
r6
500
19.6850
and up
18
0.7087
65
2.5590
m6
65
2.5590
100
3.9370
n6
100
3.9370
140
5.5118
p6
140
5.5118
200
7.8740
r6
200
7.8740
500
19.6850
r7
k6
In very accurate
applications, k5 and m5
are used instead of k6
and m6 respectively.
r7
Applications in general
(1)For solid steel shaft. See tables on pages 132-137 for tolerance values.
124
All diameters
One-piece
bearing
housing
Rotating outer
ring load
Indeterminate
load direction
Split or
one-piece
bearing
housing
One-piece
bearing
housing
Stationary
outer ring load
Applications
requiring
particular
accuracy
Tolerance Symbol(1)
Examples
Remarks
P6
P7
N7
M7
Normal and light loads, axial displacement of the outer ring is desirable
All loads
H7
Line shaftings
H8
Dryer cylinders
G7
For main
spindles
in machine
tools
M6
K6
J6
K7
J7
N6
P6
(1)Cast iron or steel housing. For tolerance values see tables on pages 138-145. For housings of light metal, tolerances generally are selected that give a slightly tighter fit
Bore
Over
Incl.
mm
in.
mm
in.
50.000
Tolerance(1)
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
80.000
-0.015
-0.025
-0.036
1.9685
3.1496
-0.0006
-0.0010
-0.0014
0.010L
0.036L
0.0004L
0.0014L
80.000
120.000
-0.020
-0.033
-0.043
3.4196
4.7244
-0.0008
-0.0013
-0.0017
120.000
180.000
-0.025
-0.041
-0.053
4.7244
7.0866
-0.0010
-0.0016
-0.0021
180.000
250.000
-0.030
-0.048
-0.064
7.0866
9.8425
-0.0012
-0.0019
-0.0025
0.013L
0.043L
0.0005L
0.0017L
0.015L
0.053L
0.0006L
0.0021L
0.018L
0.064L
0.0007L
0.0025L
125
Shaft Diameter
mm
in.
mm
in.
Shaft Tolerance
Symbol(1)
Lower
Upper
C(2)
All
All
g6
All
All
h6
Upper
0.08C
0.18C
0.08C
0.18C
0
0
40
1.57
k6(3)
40
1.57
140
5.51
m6(4)
140
5.51
320
12.60
n6
320
12.60
500
19.68
p6
500
19.68
0
0
40
1.57
k5
40
1.57
100
3.94
m5
100
3.94
140
5.51
m6
140
5.51
320
12.60
n6
320
12.60
500
19.68
p6
500
19.68
r6
0
0
40
1.57
m5(5)
40
1.57
65
2.56
m6(5)
65
2.56
140
5.51
n6(5)
140
5.51
320
12.60
p6(5)
320
12.60
500
19.68
r6(5)
500
19.68
r7(5)
Thrust Loads
Not suggested, consult your Timken engineer.
(1)For solid shaft. See pages 132-137 for tolerance values.
(2)C = dynamic load rating.
126
All
Incl.
Shaft Diameter
Shaft Tolerance
mm
in.
mm
in.
100
3.93
120
4.72
n6
120
4.72
225
8.85
p6
225
8.85
400
15.75
r6
400
15.75
(1)For solid shaft. See pages 132-137 for tolerance values.
Symbol(1)
s6
5200, A5200 Metric Series Shaft and Housing Fits and Tolerances
Incl.
mm
in.
mm
in.
80
3.1496
Bore
Tolerance(2)
Press Fit
Rotating Inner Ring
Shaft Diameter
Slip Fit
Stationary Inner Ring
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
120
4.7236
-0.020
-0.0008
+0.048
+0.0019
+0.025
+0.0010
120
4.7236
140
5.5108
-0.025
-0.0010
+0.056
+0.0022
140
5.5108
180
7.0856
-0.025
-0.0010
180
7.0856
240
9.4476
-0.030
-0.0012
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.025T
0.0010T
0.069T
0.0027T
0.000
0.0000
-0.023
-0.0009
0.023L
0.0009L
0.020T
0.0008T
+0.030
+0.0012
0.030T
0.0012T
0.081T
0.0032T
0.000
0.0000
-0.025
-0.0010
0.025L
0.0010L
0.025T
0.0010T
+0.071
+0.0028
+0.046
+0.0018
0.046T
0.0018T
0.097T
0.0038T
0.000
0.0000
-0.025
-0.0010
0.025L
0.0010L
0.025T
0.0010T
+0.081
+0.0032
+0.051
+0.0020
0.051T
0.0020T
0.112T
0.0044T
0.000
0.0000
-0.030
-0.0012
0.030L
0.0012L
0.030T
0.0012T
(1) When shaft is used as ring surface, hardness to be Rc58 minimum and surface finish to be 15 RMS.
(2)Tolerance range is from +0 to value listed.
Incl.
mm
in.
mm
in.
O.D.
Tolerance(1)
Slip Fit
Stationary Outer Ring
Housing Diameter
Press Fit
Rotating Outer Ring
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
180
7.0866
-0.025
-0.0010
+0.022
+0.0008
-0.015
-0.0006
180
7.0866
200
7.8740
-0.030
-0.0012
+0.018
+0.0007
200
7.874
230
9.0551
-0.030
-0.0012
230
9.0551
250
9.8425
250
9.8425
Housing Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.015T
0.0006T
0.046L
0.0018L
-0.025
-0.0010
-0.056
-0.0022
0.056T
0.0022T
0.000L
0.0000L
-0.018
-0.0007
0.018T
0.0007T
0.048L
0.0019L
-0.030
-0.0012
-0.066
-0.0026
0.066T
0.0026T
0.000L
0.0000L
+0.023
+0.0009
-0.018
-0.0007
0.018T
0.0007T
0.053L
0.0021L
-0.030
-0.0012
-0.066
-0.0026
0.066T
0.0026T
0.000L
0.0000L
-0.030
-0.0012
+0.028
+0.0011
-0.018
-0.0007
0.018T
0.0007T
0.058L
0.0023L
-0.030
-0.0012
-0.066
-0.0026
0.066T
0.0026T
0.000L
0.0000L
270
10.6299
-0.036
-0.0014
+0.028
+0.0011
-0.018
-0.0007
0.018T
0.0007T
0.064L
0.0025L
-0.030
-0.0012
-0.071
-0.0028
0.071T
0.0028T
0.005L
0.0002L
270
10.6299
310
12.2047
-0.036
-0.0014
+0.033
+0.0013
-0.018
-0.0007
0.018T
0.0007T
0.069L
0.0027L
-0.036
-0.0014
-0.071
-0.0028
0.071T
0.0028T
0.005L
0.0002L
310
12.2047
400
15.7480
-0.041
-0.0016
+0.038
+0.0015
-0.018
-0.0007
0.018T
0.0007T
0.079L
0.0031L
-0.036
-0.0014
-0.076
-0.0030
0.079T
0.0030T
0.005L
0.0002L
400
15.748
440
17.3228
-0.046
-0.0018
+0.041
+0.0016
-0.023
-0.0009
0.023T
0.0009T
0.086L
0.0034L
-0.036
-0.0014
-0.086
-0.0034
0.086T
0.0034T
0.010L
0.0004L
127
Bearing Bore
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
100
3.937
0.183
0.0072
0.127
0.005
100
3.937
120
4.7244
0.188
0.0074
0.127
0.005
120
4.7244
140
5.5118
0.208
0.0082
0.142
0.0056
140
5.5118
170
6.6929
0.224
0.0088
0.152
0.006
170
6.6929
180
7.0866
0.229
0.009
0.152
0.006
180
7.0866
220
8.6614
0.254
0.01
0.173
0.0068
220
8.6614
240
9.4488
0.269
0.0106
0.183
0.0072
Bearing
Number
Bearing Bore
Width
Over
Incl.
Bore &
Inner O.D.(1)
mm
in.
mm
in.
mm
in.
mm
in.
80
3.1496
120
4.7244
-0.020
-0.0008
-0.203
-0.0080
120
4.7244
80
7.0866
-0.025
-0.0010
-0.254
-0.0100
180
7.0866
250
9.8425
-0.030
-0.0012
-0.305
-0.0120
+0
O.D.(1)
Width
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
150
5.9055
180
7.0866
-0.025
-0.0010
+0.036
+0.0014
180
7.0866
250
9.8425
-0.030
-0.0012
+0.041
+0.0016
250
9.8425
315
12.4016
-0.036
-0.0014
+0.046
+0.0018
315
12.4016
400
15.748
-0.041
-0.0016
+0.051
+0.0020
400
15.748
500
19.685
-0.046
-0.0018
+0.056
+0.0022
128
+0
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
5220 WS
121.064
4.7663
121.044
4.7655
121.036
4.7652
121.016
4.7644
5222 WS
133.007
5.2365
132.987
5.2357
132.969
5.235
132.949
5.2343
5224 WS
145.194
5.7163
145.174
5.7155
145.156
5.7148
145.136
5.714
5226 WS
155.042
6.104
155.016
6.103
155.004
6.1025
154.978
6.1015
5228 WS
168.529
6.635
168.504
6.634
168.491
6.6335
168.466
6.6325
5230 WS
181.623
7.1505
181.597
7.1495
181.587
7.149
181.559
7.148
5232 WS
193.713
7.6265
193.688
7.6255
193.675
7.625
193.65
7.624
5234 WS
205.562
8.093
205.537
8.092
205.524
8.0915
205.499
8.0905
5236 WS
216.37
8.5185
216.344
8.5175
216.319
8.5165
216.294
8.5155
5238 WS
229.032
9.017
229.001
9.0158
228.994
9.0155
228.963
9.0143
5240 WS
242.296
9.5392
242.265
9.538
242.245
9.5372
242.214
9.536
5244 WM
266.02
10.4725
265.971
10.4713
265.951
10.4705
265.92
10.4693
5248WM
291.292
11.4682
291.262
11.467
291.241
11.4662
291.211
11.465
(1)All shaft diameters are based on a housing bore to housing O.D. ratio of 0.7.
Outer Ring
Displaceable Axially
P6
No
N6
No
Light loads
Conveyor rollers
Rope sheaves
Tension pulleys
M6
No
M7
No
Electric motors
Pumps
Crankshaft main bearings
K6
Electric motors
Pumps
Crankshaft main bearings
J6
Yes, normally
J6
Yes, normally
General applications
Heavy rail vehicles
H6
Easily
Transmission drives
H7
Easily
Dryer cylinders
G7
Easily
Operating Conditions
Examples
Outer Ring Rotating
No, normally
One-piece housing
Radially split housing
(1)Cast iron steel housing. See pages 138-145 for numerical values. Where wider tolerances are permissible, P7, N7, M7, K7, J7 and H7 values may be used in place of P6, N6, M6,
K6, J6 and H6 values, respectively.
129
Shaft Rotating
Load Stationary
Shaft Diameter(1)
Mean Fit
Tight
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
00
10
0.3937
9.992
0.3934
9.997
0.3936
10.005
0.3939
0.005
0.0002
01
12
0.4724
11.991
0.4721
11.996
0.4723
12.004
0.4726
02
15
0.5906
14.994
0.5903
14.999
0.5905
03
17
0.6693
16.993
0.6690
04
20
0.7874
05
Basic
Bearing
Number
Shaft Rotating
Load Stationary
Shaft Diameter(1)
Mean Fit
Tight
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
14
70
2.7559
69.990
2.7555
69.997
2.7558
70.010
2.7563
0.009
0.00035
0.005
0.0002
15
75
2.9528
74.991
2.9524
74.999
2.9527
75.011
2.9532
0.009
0.00035
15.006
0.5908
0.005
0.0002
16
80
3.1496
79.990
3.1492
79.997
3.1495
80.010
3.1500
0.009
0.00035
16.998
0.6692
17.005
0.6695
0.005
0.0002
17
85
3.3465
84.988
3.3460
84.999
3.3464
85.014
3.3470
0.011
0.00045
19.992
0.7871
19.997
0.7873
20.005
0.7876
0.005
0.0002
18
90
3.5433
89.987
3.5428
89.997
3.5432
90.013
3.5438
0.011
0.00045
25
0.9843
24.994
0.9840
24.999
0.9842
25.006
0.9845
0.005
0.0002
19
95
3.7402
94.988
3.7397
94.999
3.7401
95.014
3.7407
0.011
0.00045
06
30
1.1811
29.992
1.1808
29.997
1.1810
30.005
1.1813
0.005
0.0002
20
100
3.9370
99.987
3.9365
99.997
3.9369
100.013
3.9375
0.011
0.00045
07
35
1.3780
34.994
1.3777
34.999
1.3779
35.009
1.3783
0.006
0.00025
21
105
4.1339
104.988
4.1334
104.999
4.1338
105.014
4.1344
0.011
0.00045
08
40
1.5748
39.992
1.5745
39.997
1.5747
40.008
1.5751
0.006
0.00025
22
110
4.3307
109.987
4.3302
109.997
4.3306
110.012
4.3312
0.011
0.00045
09
45
1.7717
44.994
1.7714
44.999
1.7716
45.009
1.7720
0.006
0.00025
24
120
4.7244
119.987
4.7239
119.997
4.7243
120.012
4.7249
0.011
0.00045
10
50
1.9685
49.992
1.9682
49.997
1.9684
50.008
1.9688
0.006
0.00025
26
130
5.1181
129.982
5.1174
129.997
5.1180
130.015
5.1187
0.015
0.0006
11
55
2.1654
54.991
2.1650
54.999
2.1653
55.011
2.1658
0.009
0.00035
28
140
5.5118
139.982
5.5111
139.997
5.5117
140.015
5.5124
0.015
0.0006
12
60
2.3622
59.990
2.3618
59.997
2.3621
60.010
2.3626
0.009
0.00035
30
150
5.9055
149.982
5.9048
149.997
5.9054
150.015
5.9061
0.015
0.0006
13
65
2.5591
64.991
2.5587
64.999
2.5590
65.011
2.5595
0.009
0.00035
130
Outer Ring
Displaceable Axially
P6
No
N6
No
Light loads
Conveyor rollers
Rope sheaves
Tension pulleys
M6
No
M7
No
Electric motors
Pumps
Crankshaft main bearings
K6
Electric motors
Pumps
Crankshaft main bearings
J6
Yes, normally
J6
Yes, normally
General applications
Heavy rail vehicles
H6
Easily
Transmission drives
H7
Easily
Drier cylinders
G7
Easily
Operating Conditions
Examples
Outer Ring Rotating
No, normally
All
(1)Cast iron steel housing. See pages 138-145 for tolerance values. Where wider tolerances are permissible, P7, N7, M7, K7, J7 and H7 values
may be used in place of P6, N6, M6, K6, J6 and H6 values respectively.
Upper
Operating Conditions
Shaft
Tolerance Symbol
Examples
Ce(1)
g6
Wheels
Non-rotating shafts
Ce
h6
Tension pulleys
0.07 Ce
j6(2)
Light loads
0.07 Ce
0.15 Ce
k5
Normal loads
Electrical motors
Turbines
Pumps
Combustion engines
Gear transmissions
0.15 Ce
Ce
m5
Heavy loads
Shock loads
Rail vehicles
Traction motors
Ce
j6(3)
Thrust Loads
All
(3)Bearings with greater than nominal clearance must be used.
131
Incl.
mm
in.
mm
in.
3.000
0.1181
g6
Tolerance(1)
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
6.000
0.2362
-0.008
-0.003
-0.004
-0.0002
6.000
0.2362
10.000
0.3937
-0.008
-0.003
10.000
0.3937
18.000
0.7087
18.000
0.7087
h6
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.012
-0.0005
0.012L
0.004T
0.0005L
0.0001T
0.000
0.0000
-0.005
-0.0002
-0.014
-0.0006
0.014L
0.003T
0.0006L
0.0001T
-0.008
-0.003
-0.006
-0.0002
-0.017
-0.0007
30.000
1.1811
-0.010
-0.0004
-0.007
-0.0003
30.000
1.1811
50.000
1.9685
-0.012
-0.0005
50.000
1.9685
80.000
3.1496
80.000
3.1496
h5
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.008
-0.003
0.008L
0.008T
0.0003L
0.0003T
0.000
0.0000
0.000
0.0000
-0.009
-0.0004
0.009L
0.008T
0.0004L
0.0003T
0.017L
0.002T
0.0007L
-0.0001T
0.000
0.0000
-0.011
-0.0004
-0.020
-0.0008
0.020L
0.003T
0.0008L
0.0001T
0.000
0.0000
-0.009
-0.0004
-0.025
-0.0010
0.025L
0.003T
0.0010L
0.0001T
-0.015
-0.0006
-0.010
-0.0004
-0.029
-0.0011
120.000
4.7244
-0.020
-0.0008
-0.012
-0.0005
120.000
4.7244
180.000
7.0866
-0.025
-0.0010
180.000
7.0866
200.000
7.8740
200.000
7.8740
j5
Fit
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.005
-0.0002
0.005L
0.008T
0.0002L
0.0003T
+0.003
+0.0001
-0.002
-0.0001
0.002L
0.011T
0.0001L
0.0004T
0.000
0.0000
-0.006
-0.0002
0.006L
0.008T
0.0002L
0.0003T
+0.004
+0.0002
-0.002
-0.0001
0.002L
0.012T
0.0001L
-0.0005T
0.011L
0.008T
0.0004L
0.0003T
0.000
0.0000
-0.008
-0.0003
0.008L
0.008T
0.0003L
0.0003T
+0.005
+0.0002
-0.003
-0.0001
0.003L
0.013T
0.0001L
0.0005T
-0.013
-0.0005
0.013L
0.010T
0.0005L
0.0004T
+0.005
+0.0002
-0.004
-0.0002
0.004L
0.015T
0.0002L
0.0006T
0.000
0.0000
-0.016
-0.0006
0.016L
0.012T
0.0006L
0.0005T
+0.006
+0.0002
-0.005
-0.0002
0.005L
0.018T
0.0002L
0.0007T
0.029L
0.005T
0.0011L
0.0002T
0.000
0.0000
-0.019
-0.0007
0.019L
0.015T
0.0007L
0.0006T
+0.006
+0.0002
-0.007
-0.0003
0.007L
0.021T
0.0003L
0.0008T
-0.034
-0.0013
0.034L
0.008T
0.0013L
0.0003T
0.000
0.0000
-0.022
-0.0009
0.022L
0.020T
0.0009L
0.0008T
+0.006
+0.0002
-0.009
-0.0004
0.009L
0.026T
0.0004L
0.0010T
-0.014
-0.0006
-0.039
-0.0015
0.039L
0.011T
0.0015L
0.0004T
0.000
0.0000
-0.025
-0.0010
0.025L
0.025T
0.0010L
0.0010T
+0.007
+0.0003
-0.011
-0.0004
0.011L
0.032T
0.0004L
0.0013T
-0.030
-0.0012
-0.015
-0.0006
-0.044
-0.0017
0.044T
0.015T
0.0017L
0.0006T
0.000
0.0000
-0.029
-0.0011
0.029L
0.030T
0.0011L
0.0012T
+0.007
+0.0003
-0.013
-0.0005
0.013L
0.037T
0.0005L
0.0015T
225.000
8.8583
-0.030
-0.0012
-0.015
-0.0006
-0.044
-0.0017
0.044T
0.015T
0.0017L
0.0006T
0.000
0.0000
-0.029
-0.0011
0.029L
0.030T
0.0011L
0.0012T
+0.007
+0.0003
-0.013
-0.0005
0.013L
0.037T
0.0005L
0.0015T
225.000
8.8583
250.000
9.8425
-0.030
-0.0012
-0.015
-0.0006
-0.044
-0.0017
0.044T
0.015T
0.0017L
0.0006T
0.000
0.0000
-0.029
-0.0011
0.029L
0.030T
0.0011L
0.0012T
+0.007
+0.0003
-0.013
-0.0005
0.013L
0.037T
0.0005L
0.0015T
250.000
9.8425
280.000
11.0236
-0.035
-0.0014
-0.017
-0.0007
-0.049
-0.0019
0.049L
0.018T
0.0019L
0.0007T
0.000
0.0000
-0.032
-0.0013
0.032L
0.035T
0.0013L
0.0014T
+0.007
+0.0003
-0.016
-0.0006
0.016L
0.042T
0.0006L
0.0017T
280.000
11.0236
315.000
12.4016
-0.035
-0.0014
-0.017
-0.0007
-0.049
-0.0019
0.049L
0.018T
0.0019L
0.0007T
0.000
0.0000
-0.032
-0.0013
0.032L
0.035T
0.0013L
0.0014T
+0.007
+0.0003
-0.016
-0.0006
0.016L
0.042T
0.0006L
0.0017T
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing bore.
(1)Tolerance range is from +0 to value listed.
132
j6
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
+0.006
+0.0002
k5
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.002
-0.0001
0.002L
0.014T
0.0001L
0.0005T
+0.006
+0.0002
+0.007
+0.0003
-0.002
-0.0001
0.002L
0.015T
0.0001L
0.0006T
+0.008
+0.0003
-0.003
-0.0001
+0.009
+0.0004
k6
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
+0.001
+0.0000
0.001T
0.014T
0.0000T
0.0005T
+0.007
+0.0003
+0.001
+0.0000
0.001T
0.015T
0.0000T
0.0006T
0.003L
0.016T
0.0001L
0.0006T
+0.009
+0.0004
+0.001
+0.0000
-0.004
-0.0002
0.004L
0.019T
0.0002L
0.0008T
+0.011
+0.0004
+0.011
+0.0004
-0.005
-0.0002
0.005L
0.023T
0.0002L
0.00085T
+0.012
+0.0005
-0.007
-0.0003
+0.013
+0.0005
m5
Fit
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
+0.009
+0.0004
+0.004
+0.0002
0.004T
0.017T
0.0002T
0.0007T
+0.012
+0.0005
+0.006
+0.0002
0.006T
0.020T
0.0002T
0.0008T
0.001T
0.017T
0.0000T
0.0007T
+0.015
+0.0006
+0.007
+0.0003
0.007T
0.023T
0.0003T
0.0009T
+0.002
+0.0001
0.002T
0.021T
0.0001T
0.0008T
+0.017
+0.0007
+0.008
+0.0003
0.008T
0.027T
0.0003T
0.0011T
+0.013
+0.0005
+0.002
+0.0001
0.002T
0.025T
0.0001T
0.0010T
+0.018
+0.0007
+0.002
+0.0001
0.002T
0.030T
0.0001T
0.0012T
+0.020
+0.0008
+0.009
+0.0004
0.009T
0.032T
0.0004T
0.00125T
0.007L
0.027T
0.0003L
0.0011T
+0.015
+0.0006
+0.002
+0.0001
0.002T
0.030T
0.0001T
0.0012T
+0.021
+0.0008
+0.002
+0.0001
0.002T
0.036T
0.0001T
0.0014T
+0.024
+0.0009
+0.011
+0.0004
0.011T
0.039T
0.0004T
0.0015T
-0.009
-0.0004
0.009L
0.033T
0.0004L
0.0013T
+0.018
+0.0007
+0.003
+0.0001
0.003T
0.038T
0.0001T
0.0015T
+0.025
+0.0010
+0.003
+0.0001
0.003T
0.045T
0.0001T
0.0018T
+0.028
+0.0011
+0.013
+0.0005
0.013T
0.048T
0.0005T
0.0019T
+0.014
+0.0006
-0.011
-0.0004
0.011L
0.039T
0.0004L
0.0016T
+0.021
+0.0008
+0.003
+0.0001
0.003T
0.046T
0.0001T
0.0018T
+0.028
+0.0011
+0.003
+0.0001
0.003T
0.053T
0.0001T
0.0021T
+0.033
+0.0013
+0.015
+0.0006
0.015T
0.058T
0.0006T
0.0023T
+0.016
+0.0006
-0.013
-0.0005
0.013L
0.046T
0.0005L
0.0018T
+0.024
+0.0009
+0.004
+0.0002
0.004T
0.054T
0.0002T
0.0021T
+0.037
+0.0015
+0.017
+0.0007
0.017T
0.067T
0.0007T
0.0027T
+0.016
+0.0006
-0.013
-0.0005
0.013L
0.046T
0.0005L
0.0018T
+0.024
+0.0009
+0.004
+0.0002
0.004T
0.054T
0.0002T
0.0021T
+0.037
+0.0015
+0.017
+0.0007
0.017T
0.067T
0.0007T
0.0027T
+0.016
+0.0006
-0.013
-0.0005
0.013L
0.046T
0.0005L
0.0018T
+0.024
+0.0009
+0.004
+0.0002
0.004T
0.054T
0.0002T
0.0021T
+0.037
+0.0015
+0.017
+0.0007
0.017T
0.067T
0.0007T
0.0027T
+0.016
+0.0006
-0.016
-0.0006
0.016L
0.051T
0.0006L
0.0020T
+0.027
+0.0011
+0.004
+0.0002
0.004T
0.062T
0.0002T
0.0025T
+0.043
+0.0017
+0.020
+0.0008
0.020T
0.078T
0.0008T
0.0031T
+0.016
+0.0006
-0.016
-0.0006
0.016L
0.051T
0.0006L
0.0020T
+0.027
+0.0011
+0.004
+0.0002
0.004T
0.062T
0.0002T
0.0025T
+0.043
+0.0017
+0.020
+0.0008
0.020T
0.078T
0.0008T
0.0031T
133
Table
70 continued.
Table
70. Radial Ball, Spherical and cylindrical Roller bearing Shaft tolerances
Bearing Bore
Nominal (Max.)
Over
Incl.
mm
in.
mm
in.
315.000
12.4016
g6
Tolerance(1)
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
355.000
13.9764
-0.040
-0.0016
-0.018
-0.0007
355.000
13.9764
400.000
15.7480
-0.040
-0.0016
400.000
15.7480
450.000
17.7165
450.000
17.7165
h6
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.054
-0.0021
0.054L
0.022T
0.0021L
0.0009T
0.000
0.0000
-0.018
-0.0007
-0.054
-0.0021
0.054L
0.022T
0.0021L
0.0009T
-0.045
-0.0018
-0.020
-0.0008
-0.060
-0.0024
500.000
19.6850
-0.045
-0.0018
-0.020
-0.0008
500.000
19.6850
560.000
22.0472
-0.050
-0.0020
560.000
22.0472
630.000
24.8032
630.000
24.8032
h5
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.036
-0.0014
0.036L
0.040T
0.0014L
0.0016T
0.000
0.0000
-0.036
-0.0014
0.036L
0.040T
0.0014L
0.0016T
0.060L
0.025T
0.0024L
0.0010T
0.000
0.0000
-0.040
-0.0016
-0.060
-0.0024
0.060L
0.025T
0.0024L
0.0010T
0.000
0.0000
-0.022
-0.0009
-0.066
-0.0026
0.066L
0.028T
0.0026L
0.0011T
-0.050
-0.0020
-0.022
-0.0009
-0.066
-0.0026
710.000
27.9528
-0.075
-0.0030
-0.024
-0.0009
710.000
27.9528
800.000
31.4961
-0.075
-0.0030
800.000
31.4961
900.000
35.4331
j5
Fit
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
+0.007
+0.0003
-0.018
-0.0007
0.018L
0.047T
0.0007L
0.0019T
+0.007
+0.0003
-0.018
-0.0007
0.018L
0.047T
0.0007L
0.0019T
0.040L
0.045T
0.0016L
0.0018T
+0.007
+0.0003
-0.020
-0.0008
0.020L
0.052T
0.0008L
0.0021T
-0.040
-0.0016
0.040L
0.045T
0.0016L
0.0018T
+0.007
+0.0003
-0.020
-0.0008
0.020L
0.052T
0.0008L
0.0020T
0.000
0.0000
-0.044
-0.0017
0.044L
0.050T
0.0017L
0.0020T
+0.008
0.0003
-0.022
-0.0009
0.022L
0.058T
0.0009L
0.0023T
0.066L
0.028T
0.0026L
0.0011T
0.000
0.0000
-0.044
-0.0017
0.044L
0.050T
0.0017L
0.0020T
+0.008
+0.0003
-0.022
-0.0009
0.022L
0.058T
0.0009L
0.0023T
-0.074
-0.0029
0.074L
0.051T
0.0029L
0.0021T
0.000
0.0000
-0.050
-0.0020
0.050L
0.075T
0.0020L
0.0030T
+0.010
+0.0004
-0.025
-0.0010
0.025L
0.085T
0.0010L
0.0035T
-0.024
-0.0009
-0.074
-0.0029
0.074L
0.051T
0.0029L
0.0021T
0.000
0.0000
-0.050
-0.0020
0.050L
0.075T
0.0020L
0.0030T
+0.010
+0.0004
-0.025
-0.0010
0.025L
0.085T
0.0010L
0.0035T
-0.100
-0.0039
-0.026
-0.0010
-0.082
0.0032
0.082L
0.074T
0.0032L
0.0029T
0.000
0.0000
-0.056
-0.0022
0.056L
0.100T
0.0022L
0.0039T
+0.012
+0.0005
-0.028
-0.0011
0.028L
0.112T
0.0011L
0.0044T
900.000 1000.000
35.4331 39.3701
-0.100
-0.0039
-0.026
-0.0010
-0.082
0.0032
0.082L
0.074T
0.0032L
0.0029T
0.000
0.0000
-0.056
-0.0022
0.056L
0.100T
0.0022L
0.0039T
+0.012
+0.0005
-0.028
-0.0011
0.028L
0.112T
0.0011L
0.0044T
1000.000 1120.000
39.3701 44.0945
-0.125
-0.0049
-0.028
-0.0011
-0.094
-0.0037
0.094L
0.097T
0.0037L
0.0038T
0.000
0.0000
-0.066
-0.0026
0.066L
0.125T
0.0022L
0.0039T
+0.013
+0.0005
-0.033
-0.0013
0.033L
0.138T
0.0013L
0.0054T
1120.000 1250.000
44.0945 49.2126
-0.125
-0.0049
-0.028
-0.0011
-0.094
-0.0037
0.094L
0.097T
0.0037L
0.0038T
0.000
0.0000
-0.066
-0.0026
0.066L
0.125T
0.0022L
0.0039T
+0.013
+0.0005
-0.033
-0.0013
0.033L
0.138T
0.0013L
0.0054T
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing bore.
(1)Tolerance range is from +0 to value listed.
134
j6
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
+0.018
+0.0007
k5
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.018
-0.0007
0.018L
0.058T
0.0007L
0.0023T
+0.029
+0.0011
+0.018
+0.0007
-0.018
-0.0007
0.018L
0.058T
0.0007L
0.0023T
+0.020
+0.0008
-0.020
-0.0008
+0.020
+0.0008
k6
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
+0.046
+0.0002
0.004T
0.069T
0.0002T
0.0027T
+0.029
+0.0011
+0.004
+0.0002
0.004T
0.069T
0.0002T
0.0027T
0.020L
0.065T
0.0008L
0.0026T
+0.032
+0.0013
+0.005
+0.0002
-0.020
-0.0008
0.020L
0.065T
0.0008L
0.0026T
+0.032
+0.0013
+0.022
+0.0009
-0.022
-0.0009
0.022L
0.072T
0.0009L
0.0029T
+0.022
+0.0009
-0.022
-0.0009
+0.025
+0.0010
m5
Fit
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
+0.046
+0.0018
+0.021
+0.0008
0.021T
0.086T
0.0008T
0.0034T
+0.046
+0.0018
+0.021
+0.0008
0.021T
0.086T
0.0008T
0.0034T
0.005T
0.077T
0.0002T
0.0031T
+0.050
+0.0020
+0.023
+0.0009
0.023T
0.095T
0.0009T
0.0037T
+0.005
+0.0002
0.005T
0.077T
0.0002T
0.0031T
+0.050
+0.0020
+0.023
+0.0009
0.023T
0.095T
0.0009T
0.0037T
+0.030
+0.0012
0.000
0.0000
0.00T
0.080T
0.0000T
0.0032T
+0.056
+0.0022
+0.026
+0.0010
0.026T
0.106T
0.0010T
0.0042T
0.022L
0.072T
0.0009L
0.0029T
+0.030
+0.0012
0.000
0.0000
0.00T
0.080T
0.0000T
0.0032T
+0.056
+0.0022
+0.026
+0.0010
0.026T
0.106T
0.0010T
0.0042T
-0.025
-0.0010
0.025L
0.100T
0.0010L
0.0040T
+0.035
+0.0014
0.000
0.0000
0.000T
0.110T
0.0000T
0.0044T
+0.065
+0.0026
+0.030
+0.0012
0.030T
0.140T
0.0012T
0.0056T
+0.025
+0.0010
-0.025
-0.0010
0.025L
0.100T
0.0010L
0.0040T
+0.035
+0.0014
0.000
0.0000
0.000T
0.110T
0.0000T
0.0044T
+0.065
+0.0026
+0.030
+0.0012
0.030T
0.140T
0.0012T
0.0056T
+0.025
+0.0010
-0.025
-0.0010
0.028L
0.128T
0.0011L
0.0050L
+0.040
+0.0016
0.000
0.0000
0.000T
0.140T
0.0000T
0.0055T
+0.074
+0.0029
+0.0030
+0.0012
0.034T
0.174T
0.0012T
0.0056T
+0.028
+0.0011
-0.028
-0.0011
0.028L
0.128T
0.0011L
0.0050T
+0.040
+0.0016
0.000
0.0000
0.000T
0.140T
0.0000T
0.0055T
+0.074
+0.0029
+0.034
+0.0013
0.034T
0.174T
0.0013T
0.0068T
+0.028
+0.0011
-0.028
-0.0011
0.033L
0.158T
0.0013L
0.0062T
+0.046
+0.0018
0.000
0.0000
0.000T
0.171T
0.0000T
0.0067T
+0.086
+0.0034
+0.040
+0.0016
0.040T
0.211T
0.0016T
0.0083T
+0.033
+0.0013
-0.033
-0.0013
0.033L
0.158T
0.0013L
0.0062T
+0.046
+0.0018
0.000
0.0000
0.000T
0.171T
0.0000T
0.0067T
+0.086
+0.0034
+0.040
+0.0016
0.040T
0.211T
0.0016T
0.0083T
135
Table 71. Radial Ball, Spherical roller and cylindrical roller bearing Shaft tolerances
Bearing Bore
Nominal (Max.)
Over
Incl.
mm
in.
mm
in.
Tolerance(1)
m6
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
3.000 6.000
0.1181 0.2362
-0.008
-0.0003
6.000 10.000
0.2362 0.3937
-0.008
-0.0003
10.000 18.000
0.3937 0.7087
n6
Fit
Shaft Diameter
p6
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
r6
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.008
-0.0003
18.000 30.000
0.7087 1.1811
-0.010
-0.0004
30.000 50.000
1.1811 1.9685
-0.012
-0.0005
0.009T
+0.025 +0.009 0.037T
+0.0010 +0.0004 0.0004T
0.0145T
50.000 80.000
1.9685 3.1496
-0.015
-0.0006
0.011T
0.020T
+0.030 +0.011 0.045T +0.039 +0.020 0.054T
+0.0012 +0.0004 0.0004T +0.0015 +0.0008 0.0008T
0.0018T
0.0021T
80.000 120.000
3.1496 4.7244
-0.020
-0.0008
0.013T
0.023T
0.037T
+0.035 +0.013 0.055T +0.045 +0.023 0.065T +0.059 +0.037 0.079T
+0.0014 +0.0005 0.0005T +0.0018 +0.0009 0.0009T +0.0023 +0.0015 0.0015T
0.0022T
0.0026T
0.0031T
120.000 180.000
4.7244 7.0866
-0.025
-0.0010
180.000 200.000
7.0866 7.8740
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
r7
Fit
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
0.015T
0.027T
0.043T
0.065T
+0.040 +0.015 0.065T +0.052 +0.027 0.077T +0.068 +0.043 0.093T +0.090 +0.065 0.115T
+0.0016 +0.0006 0.0006T +0.0020 +0.0011 0.0011T +0.0027 +0.0017 0.0017T +0.0035 +0.0026 0.0026T
0.0026T
0.0030T
0.0037T
0.0045T
-0.030
-0.0012
0.017T
0.031L
0.050T
0.077T
+0.046 +0.017 0.076T +0.060 +0.031 0.090T +0.079 +0.050 0.109T +0.106 +0.077 0.136T
+0.0018 +0.0007 0.0007T +0.0024 +0.0012 0.0012L +0.0031 +0.0020 0.0020T +0.0042 +0.0030 0.0030T
0.0030T
0.0036T
0.0043T
0.0054T
200.000 225.000
7.8740 8.8583
-0.030
-0.0012
0.017T
0.031L
0.050T
0.080T
0.080T
+0.046 +0.017 0.076T +0.060 +0.031 0.090T +0.079 +0.050 0.109T +0.109 +0.080 0.139T +0.126 +0.080 0.156T
+0.0018 +0.0007 0.0007T +0.0024 +0.0012 0.0012L +0.0031 +0.0020 0.0020T +0.0043 +0.0031 0.0031T +0.0050 +0.0031 0.0031T
0.0030T
0.0036T
0.0043T
0.0055T
0.0062T
225.000 250.000
8.8583 9.8425
-0.030
-0.0012
0.017T
0.031L
0.050T
0.084T
0.084T
+0.046 +0.017 0.076T +0.060 +0.031 0.090T +0.079 +0.050 0.109T +0.113 +0.084 0.143T +0.130 +0.084 0.160T
+0.0018 +0.0007 0.0007T +0.0024 +0.0012 0.0012L +0.0031 +0.0020 0.0020T +0.0044 +0.0033 0.0033T +0.0051 +0.0033 0.0033T
0.0030T
0.0036T
0.0043T
0.0056T
0.0063T
250.000 280.000
9.8425 11.0236
-0.035
-0.0014
0.020T
0.034T
0.056T
0.094T
0.094T
+0.052 +0.020 0.087T +0.066 +0.034 0.101T +0.088 +0.056 0.123T +0.126 +0.094 0.161T +0.146 +0.094 0.181T
+0.0020 +0.0008 0.0008T +0.0026 +0.0013 0.0013T +0.0035 +0.0022 0.0022T +0.0050 +0.0037 0.0037T +0.0057 +0.0037 0.0037T
0.0034T
0.0040T
0.0049T
0.0064T
0.0071T
280.000 315.000
11.0236 12.4016
-0.035
-0.0014
0.020T
0.034T
0.056T
0.098T
0.098T
+0.052 +0.020 0.087T +0.066 +0.034 0.101T +0.088 +0.056 0.123T +0.130 +0.098 0.165T +0.150 +0.098 0.185T
+0.0020 +0.0008 0.0008T +0.0026 +0.0013 0.0013T +0.0035 +0.0022 0.0022T +0.0051 +0.0039 0.0039T +0.0059 +0.0039 0.0039T
0.0034T
0.0040T
0.0049T
0.0065T
0.0073T
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing bore.
136
Table
71. Radial Ball, Spherical roller and cylindrical roller bearing Shaft tolerances
Table
71 continued.
Bearing Bore
Nominal (Max.)
Over
Incl.
mm
in.
mm
in.
Tolerance(1)
mm
in.
m6
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
n6
Fit
mm
in.
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
p6
Fit
mm
in.
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
r6
Fit
mm
in.
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
r7
Fit
mm
in.
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
Fit
mm
in.
0.021T
0.037T
0.062T
0.108T
0.108T
+0.057 +0.021 0.097T +0.073 +0.037 0.113T +0.098 +0.062 0.138T +0.144 +0.108 0.184T +0.165 +0.108 0.205T
+0.0022 +0.0008 0.0008T +0.0029 +0.0015 0.0015T +0.0039 +0.0024 0.0024T +0.0057 +0.0043 0.0043T +0.0065 +0.0043 0.0043T
0.0038T
0.0045T
0.0055T
0.0073T
0.0081T
315.000 355.000
12.4016 13.9764
-0.040
-0.0016
355.000 400.000
13.9764 15.7480
-0.040
-0.0016
0.037T
0.062T
0.114T
0.114T
+0.073 +0.037 0.113T +0.098 +0.062 0.138T +0.150 +0.114 0.190T +0.171 +0.114 0.211T
+0.0029 +0.0015 0.0015T +0.0039 +0.0024 0.0024T +0.0059 +0.0045 0.0045T +0.0067 +0.0045 0.0045T
0.0045T
0.0055T
0.0075T
0.0083T
400.000 450.000
15.7480 17.7165
-0.045
-0.0018
0.040T
0.068T
0.126T
0.126T
+0.080 +0.040 0.125T +0.108 +0.068 0.153T +0.166 +0.126 0.211T +0.189 +0.126 0.234T
+0.0031 +0.0016 0.0016T +0.0043 +0.0027 0.0027T +0.0065 +0.0050 0.0050T +0.0074 +0.0050 0.0050T
0.0049T
0.0061T
0.0083T
0.0092T
450.000 500.000
17.7165 19.6850
-0.045
-0.0018
0.040T
0.068T
0.132T
0.132T
+0.080 +0.040 0.125T +0.108 +0.068 0.153T +0.172 +0.132 0.217T +0.195 +0.132 0.240T
+0.0031 +0.0016 0.0016T +0.0043 +0.0027 0.0027T +0.0068 +0.0052 0.0052T +0.0077 +0.0052 0.0052T
0.0049T
0.0061T
0.0086T
0.0095T
500.000 560.000
19.6850 22.0472
-0.050
-0.0020
0.078T
0.150T
0.150T
+0.122 +0.078 0.172T +0.194 +0.150 0.244T +0.220 +0.150 0.270T
+0.0048 +0.0031 0.0031T +0.0076 +0.0059 0.0059T +0.0087 +0.0059 0.0059T
0.0068T
0.0096T
0.0107T
560.000 630.000
22.0472 24.8032
-0.050
-0.0020
0.078T
0.155T
0.155T
+0.122 +0.078 0.172T +0.199 +0.155 0.249T +0.225 +0.155 0.275T
+0.0048 +0.0031 0.0031T +0.0078 +0.0061 0.0061T +0.0089 +0.0061 0.0061T
0.0068T
0.0098T
0.0109T
630.000 710.000
24.8032 27.9528
-0.075
-0.0030
0.088T
0.175T
0.175T
+0.138 +0.088 0.213T +0.225 +0.175 0.300T +0.255 +0.175 0.330T
+0.0054 +0.0035 0.0035T +0.0089 +0.0069 0.0069T +0.0100 +0.0069 0.0069T
0.0084T
0.0119T
0.0130T
710.000 800.000
27.9528 31.4961
-0.075
-0.0030
0.088T
0.185T
0.185T
+0.138 +0.088 0.213T +0.235 +0.185 0.310T +0.265 +0.185 0.340T
+0.0054 +0.0035 0.0035T +0.0093 +0.0073 0.0073T +0.0104 +0.0073 0.0073T
0.0084T
0.0123T
0.0134T
800.000 900.000
31.4961 35.4331
-0.100
-0.0039
0.100T
0.210T
0.210T
+0.156 +0.100 0.256T +0.266 +0.210 0.366T +0.300 +0.210 0.400T
+0.0061 +0.0039 0.0039T +0.0105 +0.0083 0.0083T +0.0118 +0.0083 0.0083T
0.0100T
0.0144T
0.0157T
900.000 1000.000
35.4331 39.3701
-0.100
-0.0039
0.100T
0.220T
0.220T
+0.156 +0.100 0.256T +0.276 +0.220 0.366T +0.0310 +0.220 0.410T
+0.0061 +0.0039 0.0039T +0.0109 +0.0087 0.0087T +0.0122 +0.0087 0.0087T
0.0100T
0.0148T
0.0161T
1000.0001120.000
39.3701 44.0945
-0.125
-0.0049
0.120T
0.250T
0.250T
+0.186 +0.120 0.311T +0.316 +0.250 0.441T +0.355 +0.250 0.480T
+0.0073 +0.0047 0.0047T +0.0124 +0.0098 0.0098T +0.0140 +0.0098 0.0098T
0.0122T
0.0173T
0.0189T
1120.0001250.000
44.0945 49.2126
-0.125
-0.0049
0.120T
0.260T
0.260T
+0.186 +0.120 0.311T +0.326 +0.260 0.451T +0.365 +0.260 0.490T
+0.0073 +0.0047 0.0047T +0.0128 +0.0102 0.0102T +0.0144 +0.0102 0.0102T
0.0122T
0.0177T
0.0193T
137
Incl.
mm
in.
mm
in.
10.000
0.3937
Tolerance(1)
F7
G7
H6
H7
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
mm
in.
18.000
0.7087
-0.008
-0.0003
+0.034
+0.0013
18.000
0.7087
30.000
1.1811
-0.009
-0.0035
30.000
1.1811
50.000
1.9685
50.000
1.9685
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
+0.016
+0.0006
0.016L
0.042L
0.0006L
0.0016L
+0.024
+0.0009
+0.041
+0.0016
+0.020
+0.0008
0.020L
0.050L
0.0008L
0.00195L
-0.011
-0.00045
+0.050
+0.0020
+0.025
+0.0010
80.000
3.1496
-0.013
-0.0005
+0.060
+0.0024
80.000
3.1496
120.000
4.7244
-0.015
-0.0006
120.000
4.7244
150.000
5.9055
150.000
5.9055
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
+0.002
+0.0002
0.006L
0.032L
0.0002L
0.0012L
+0.011
+0.0004
+0.028
+0.0011
+0.007
+0.0003
0.007L
0.037L
0.0003L
0.00145L
0.025L
0.061L
0.0010L
0.00245L
+0.034
+0.0013
+0.009
+0.0004
+0.030
+0.0012
0.030L
0.073L
0.0012L
0.0029L
+0.040
+0.0016
+0.071
+0.0028
+0.036
+0.0014
0.036L
0.086L
0.0014L
0.0034L
-0.018
-0.0007
+0.083
+0.0033
+0.043
+0.0017
180.000
7.0866
-0.025
-0.0010
+0.083
+0.0033
180.000
7.0866
250.000
9.8425
-0.030
-0.0012
250.000
9.8425
315.000
12.4016
315.000
12.4016
Fit
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
0.000L
0.019L
0.0000L
0.0007L
+0.018
+0.0007
0.000
0.0000
0.000L
0.026L
0.0000L
0.0010L
+0.013
+0.0005
0.000
0.0000
0.000L
0.022L
0.0000L
0.00085L
+0.021
+0.0008
0.000
0.0000
0.000L
0.030L
0.0000L
0.00125L
0.009L
0.045L
0.0004L
0.00175L
+0.016
+0.0006
0.000
0.0000
0.000L
0.027L
0.0000L
0.00105L
+0.025
+0.0010
0.000
0.0000
0.000L
0.036L
0.0000L
0.00145L
+0.010
+0.0004
0.010L
0.053L
0.0004L
0.0021L
+0.019
+0.0007
0.000
0.0000
0.000L
0.032L
0.0000L
0.0012L
+0.030
+0.0012
0.000
0.0000
0.000L
0.059L
0.0000L
0.0017L
+0.047
+0.0019
+0.012
+0.0005
0.012L
0.062L
0.0005L
0.0025L
+0.022
+0.0009
0.000
0.0000
0.000L
0.037L
0.0000L
0.0015L
+0.035
+0.0014
0.000
0.0000
0.000L
0.050L
0.0000L
0.0020L
0.043L
0.101L
0.0017L
0.0040L
+0.054
+0.0021
+0.014
+0.0006
0.014L
0.072L
0.0006L
0.0028L
+0.025
+0.0010
0.000
0.0000
0.000L
0.043L
0.0000L
0.0017L
+0.040
+0.0016
0.000
0.0000
0.000L
0.058L
0.0000L
0.0023L
+0.043
+0.0017
0.043L
0.108L
0.0017L
0.0043L
+0.054
+0.0021
+0.014
+0.0006
0.014L
0.079L
0.0006L
0.0031L
+0.025
+0.0010
0.000
0.0000
0.000L
0.050L
0.0000L
0.0020L
+0.040
+0.0016
0.000
0.0000
0.000L
0.065L
0.0000L
0.0026L
+0.096
+0.0038
+0.050
+0.0020
0.050L
0.126L
0.0020L
0.0050L
+0.061
+0.0024
+0.015
+0.0006
0.015L
0.091L
0.0006L
0.0036L
+0.029
+0.0011
0.000
0.0000
0.000L
0.059L
0.0000L
0.0023L
+0.046
+0.0018
0.000
0.0000
0.000L
0.076L
0.0000L
0.0030L
-0.035
-0.0014
+0.108
+0.0043
+0.056
+0.0022
0.056L
0.143L
0.0022L
0.0057L
+0.069
+0.0027
+0.17
+0.0007
0.017L
0.104L
0.0007L
0.0041L
+0.032
+0.0013
0.000
0.0000
0.000L
0.067L
0.0000L
0.0027L
+0.052
+0.0020
0.000
0.0000
0.000L
0.087L
0.0000L
0.0034L
400.000
15.7480
-0.040
-0.0016
+0.119
+0.0047
+0.062
+0.0024
0.063L
0.159L
0.0024L
0.0063L
+0.075
+0.0030
+0.018
+0.0007
0.018L
0.115L
0.0007L
0.0046L
+0.089
+0.0014
0.000
0.0000
0.000L
0.129L
0.0000L
0.0030L
+0.057
+0.0022
0.000
0.0000
0.000L
0.097L
0.0000L
0.0038L
400.000
15.7480
500.000
19.6850
-0.045
-0.0018
+0.131
+0.0052
+0.068
+0.0027
0.068L
0.176L
0.0027L
0.0070L
+0.083
+0.0033
+0.020
+0.0008
0.020L
0.128L
0.0008L
0.0051L
+0.097
+0.0016
0.000
0.0000
0.000L
0.142L
0.0000L
0.0034L
+0.063
+0.0025
0.000
0.0000
0.000L
0.108L
0.0000L
0.0043L
500.000
19.6850
630.000
24.8032
-0.050
-0.0020
+0.146
+0.0057
+0.076
+0.0030
0.076L
0.196L
0.0030L
0.0077L
+0.092
+0.0036
+0.022
+0.0009
0.022L
0.142L
0.0009L
0.0056L
+0.110
+0.0017
0.000
0.0000
0.000L
0.160L
0.0000L
0.0037L
+0.070
+0.0028
0.000
0.0000
0.000L
0.120L
0.0000L
0.0048L
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing O.D.
(1)Tolerance range is from +0 to value listed.
138
H8
J6
J7
K6
K7
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
+0.027
+0.0011
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
0.000
0.0000
0.000L
0.035L
0.0000L
0.0014L
+0.006
+0.0002
+0.033
+0.0013
0.000
0.0000
0.000L
0.030L
0.0000L
0.00165L
+0.039
+0.0015
0.000
0.0000
+0.046
+0.0018
0.000
0.0000
+0.054
+0.054
+0.0021
0.000
0.000
0.0000
+0.063
+0.0025
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.005
-0.0002
0.005T
0.014L
0.0002T
0.0005L
+0.10
+0.004
+0.008
+0.0003
-0.005
-0.0002
0.005T
0.017L
0.0002T
0.00065L
0.000L
0.050L
0.0000L
0.00195L
+0.010
+0.0002
-0.006
-0.0002
0.000L
0.059L
0.0000L
0.0023L
+0.013
+0.0005
0.000L
0.069L
0.0000L
0.0027L
0.000
0.0000
+0.063
+0.0025
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.008
-0.0003
0.008T
0.018L
0.0003T
0.0007L
+0.002
+0.0001
+0.012
+0.0005
-0.009
-0.0004
0.009T
0.021L
0.0004T
0.00085L
0.006T
0.021L
0.0002T
0.00085L
+0.014
+0.0006
-0.011
-0.0004
-0.006
-0.0002
0.006T
0.026L
0.0002T
0.0010L
+0.018
+0.0007
+0.016
+0.0006
-0.006
-0.0002
0.006T
0.031L
0.0002T
0.0012L
0.000L
0.081L
0.0000L
0.0032L
+0.018
+0.0007
-0.007
-0.0003
0.000
0.0000
0.000L
0.088L
0.0000L
0.0035L
+0.018
+0.0007
+0.072
+0.0028
0.000
0.0000
0.000L
0.102L
0.0000L
0.0040L
+0.081
+0.0032
0.000
0.0000
+0.036
+0.035
Fit
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.009
-0.0004
0.009T
0.010L
0.0004T
0.0004L
+0.006
+0.0002
-0.012
-0.0005
0.012T
0.014L
0.0005T
0.0005L
+0.002
+0.0001
-0.011
-0.0004
0.011T
0.011L
0.0004T
0.00045L
+0.006
+0.0002
-0.015
-0.0006
0.015T
0.015L
0.0006T
0.00055L
0.011T
0.025L
0.0004T
0.00105L
+0.003
+0.0001
-0.014
-0.0005
0.013T
0.014L
0.0005T
0.00055L
+0.007
+0.0003
-0.018
-0.0007
0.018T
0.018L
0.0007T
0.00065L
-0.012
-0.0005
0.012T
0.031L
0.0005T
0.0012L
+0.004
+0.0002
-0.015
-0.0006
0.015T
0.017L
0.0006T
0.0007L
+0.009
+0.0004
-0.021
-0.0008
0.021T
0.022L
0.0008T
0.0009L
+0.022
+0.0009
-0.013
-0.0005
0.013T
0.037L
0.0005T
0.0015L
+0.004
+0.0002
-0.018
-0.0007
0.018T
0.019L
0.0007T
0.0008L
+0.010
+0.0004
-0.025
-0.0010
0.025T
0.025L
0.0010T
0.0010L
0.007T
0.036L
0.0003T
0.0014L
+0.026
+0.0010
-0.014
-0.0006
0.014T
0.044L
0.0006T
0.0017L
+0.004
+0.0002
-0.021
-0.0008
0.021T
0.022L
0.0008T
0.0009L
+0.012
+0.0005
-0.028
-0.0011
0.028T
0.030L
0.0011T
0.0012L
-0.007
-0.0003
0.007T
0.043L
0.0003T
0.0017L
+0.026
+0.0010
-0.014
-0.0006
0.014T
0.051L
0.0006T
0.0020L
+0.004
+0.0002
-0.021
-0.0008
0.021T
0.029L
0.008T
0.0012L
+0.012
+0.0005
-0.033
-0.028
0.028T
0.037L
0.0011T
0.0015L
+0.022
+0.0007
-0.007
-0.0003
0.007T
0.052L
0.0003T
0.0021L
+0.030
+0.0012
-0.016
-0.0006
0.016T
0.060L
0.0006T
0.0024L
+0.005
+0.0002
-0.024
-0.0009
0.024T
0.035L
0.0009T
0.0014L
+0.013
+0.0005
-0.0011
-0.0013
0.033T
0.043L
0.0013T
0.0017L
0.000L
0.116L
0.0000L
0.0046L
+0.025
+0.0010
-0.007
-0.0003
0.007T
0.060L
0.0003T
0.0024L
+0.036
+0.0014
-0.016
-0.0006
0.016T
0.071L
0.0006T
0.0028L
+0.005
+0.0002
-0.027
-0.0011
0.027T
0.040L
0.0011T
0.0016L
+0.016
+0.0006
-0.036
-0.0014
0.036T
0.051L
0.0014T
0.0020L
0.000
0.0000
0.000L
0.076L
0.0000L
0.0051L
+0.029
+0.0011
-0.007
-0.0003
0.007T
0.069L
0.0003T
0.0027L
+0.039
+0.0015
-0.018
-0.0007
0.018T
0.079L
0.0007T
0.0031L
+0.007
+0.0003
-0.029
-0.0011
0.029T
0.047L
0.0011T
0.0019L
+0.017
+0.0007
-0.040
-0.0016
0.040T
0.057L
0.0016T
0.0023L
+0.040
+0.0038
0.000
0.0000
0.000L
0.085
0.0000L
0.0056L
+0.033
+0.0013
-0.007
-0.0003
0.007T
0.078L
0.0003T
0.0031L
+0.043
+0.0017
-0.020
-0.0008
0.020T
0.088L
0.0008T
0.0035L
+0.008
+0.0003
-0.032
-0.0013
0.032T
0.053L
0.0013T
0.0021L
+0.018
+0.0007
-0.045
-0.0018
0.045T
0.063L
0.0018T
0.0025L
+0.044
+0.0043
0.000
0.0000
0.000L
0.094L
0.0000L
0.0063L
+0.037
+0.0015
-0.007
-0.0003
0.022T
0.098L
0.0003T
0.0035L
+0.048
+0.0019
-0.022
-0.0009
0.022T
0.098L
0.0009T
0.0039L
0.000
0.0000
-0.044
-0.0017
0.044T
0.050L
0.0017T
0.0020L
0.000
0.0000
-0.070
-0.0028
0.070T
0.050L
0.0028T
0.0020L
139
Table
72 continued.
Table
72. Radial Ball, Spherical roller and cylindrical roller bearing HOUSING tolerances
Bearing O.D.
Nominal (Max.)
Over
Incl.
mm
in.
mm
in.
630.000
24.8032
Tolerance(1)
F7
G7
H6
H7
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
mm
in.
800.000
31.4961
-0.075
-0.0030
+0.160
+0.0063
800.000 1000.000
31.4961 39.3701
-0.100
-0.0039
1000.000 1250.000
39.3701 49.2126
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
+0.080
+0.0031
0.080L
0.235L
0.0031L
0.0093L
+0.104
+0.0041
+0.179
+0.0063
+0.086
+0.0034
0.086L
0.276L
0.0034L
0.0108L
-0.125
-0.0049
+0.203
+0.0080
+0.098
+0.0039
1250.000 1600.000
49.2126 62.9921
-0.160
-0.0063
+0.155
+0.0093
1600.000 2000.000
62.9921 78.7402
-0.200
-0.0079
2000.000 2500.000
78.7402 98.4252
-0.250
-0.0098
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
+0.024
+0.0009
0.024L
0.179L
0.0009L
0.0071L
+0.125
+0.0020
+0.116
+0.0046
+0.026
+0.0010
0.026L
0.216L
0.0010L
0.0085L
0.098L
0.328L
0.0039L
0.0129L
+0.133
+0.0052
+0.028
+0.0011
+0.030
+0.0043
0.110L
0.395L
0.0043L
0.0156L
+0.155
+0.0061
+0.270
+0.0106
+0.120
+0.0047
0.120L
0.470L
0.0047L
0.0185L
+0.305
0.0120
+0.0130
+0.0051
0.130L
0.555L
0.0051L
0.0218L
140
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
0.000L
0.200L
0.0000L
0.0030L
+0.080
+0.0031
0.000
0.0000
0.000L
0.155L
0.0000L
0.0061L
+0.140
+0.0022
0.000
0.0000
0.000L
0.240L
0.0000L
0.0061L
+0.090
+0.0035
0.000
0.0000
0.000L
0.190L
0.0000L
0.0074L
0.028L
0.258L
0.0011L
0.0101L
+0.165
+0.0026
0.000
0.0000
0.000L
0.290L
0.0000L
0.0075L
+0.105
+0.0041
0.000
0.0000
0.000L
0.230L
0.0000L
0.0090L
+0.030
+0.0012
0.030L
0.315L
0.0012L
0.0124L
+0.195
+0.0031
0.000
0.0000
0.000L
0.355L
0.0000L
0.0094L
+0.125
+0.0049
0.000
0.0000
0.000L
0.355L
0.0000L
0.0112L
+0.182
+0.0072
+0.032
+0.0013
0.032L
0.382L
0.0013L
0.0151L
+0.230
+0.0036
0.000
0.0000
0.000L
0.430L
0.0000L
0.0115L
+0.150
+0.0059
0.000
0.0000
0.000L
0.350L
0.0000L
0.0138L
+0.209
+0.0082
+0.034
+0.0013
0.034L
0.459L
0.0013L
0.0180L
+0.280
+0.043
0.000
0.0000
0.000L
0.530L
0.0000L
0.0141L
+0.175
+0.0069
0.000
0.0000
0.000L
0.425L
0.0000L
0.0167L
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing O.D.
(1)Tolerance range is from +0 to value listed.
Fit
H8
J6
J7
K6
K7
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
+0.050
+0.0049
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
0.000
0.0000
0.000L
0.125L
0.0000L
0.0079L
+0.040
+0.0016
+0.056
+0.0055
0.000
0.0000
0.000L
0.156L
0.0000L
0.0094L
+0.066
+0.0065
0.000
0.0000
+0.078
+0.0077
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.010
-0.0004
0.010T
0.115L
0.0004T
0.0046L
+0.056
+0.0022
+0.046
+0.0018
-0.010
-0.0004
0.010T
0.146L
0.0004T
0.0057L
0.000L
0.191L
0.0000L
0.0114L
+0.056
+0.0022
-0.010
-0.0004
0.000
0.0000
0.000L
0.238L
0.0000L
0.0104L
+0.068
+0.0027
+0.092
+0.0091
0.000
0.0000
0.000L
0.292L
0.0000L
0.0170L
+0.110
+0.0110
0.000
0.0000
0.000L
0.360L
0.0000L
0.0208L
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.024
-0.0009
0.024T
0.131L
0.0009T
0.0052L
0.000
0.0000
+0.064
+0.0025
-0.026
-0.0010
0.026T
0.164L
0.0010T
0.0064L
0.010T
0.181L
0.0004T
0.0071L
+0.077
+0.0030
-0.028
-0.0011
-0.010
-0.0004
0.010T
0.228L
0.0004T
0.0090L
+0.095
+0.0037
+0.082
+0.0032
-0.010
-0.0004
0.110T
0.282L
0.0004T
0.0111L
+0.100
+0.0039
-0.010
-0.0004
0.010T
0.350L
0.0004T
0.0137L
Fit
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.050
-0.0020
0.050T
0.075L
0.0020T
0.0030L
0.000
0.0000
-0.080
-0.0031
0.080T
0.075L
0.0031T
0.0030L
0.000
0.0000
-0.056
-0.0022
0.056T
0.100L
0.0022T
0.0039L
0.000
0.0000
-0.090
-0.0035
0.090T
0.100L
0.0035T
0.0039L
0.028T
0.202L
0.0011T
0.0079L
0.000
0.0000
-0.066
-0.0026
0.066T
0.125L
0.0026T
0.0049L
0.000
0.0000
-0.105
-0.0041
0.105T
0.125L
0.0041T
0.0049L
-0.030
-0.0012
0.030T
0.255L
0.0012T
0.0100L
0.000
0.0000
-0.078
-0.0031
0.078T
0.160L
0.0031T
0.0063L
0.000
0.0000
-0.125
-0.0049
0.125T
0.160L
0.0049T
0.0063L
+0.118
+0.0046
-0.032
-0.0013
0.032T
0.318L
0.0013T
0.0125L
0.000
0.0000
-0.092
-0.0036
0.092T
0.200L
0.0036T
0.0079L
0.000
0.0000
-0.150
-0.0059
0.150T
0.200L
0.0059T
0.0079L
+0.141
+0.0056
-0.034
-0.0013
0.034T
0.391L
0.0013T
0.0154L
0.000
0.0000
-0.110
-0.0043
0.110T
0.250L
0.0043T
0.0098L
0.000
0.0000
-0.175
-0.0069
0.175T
0.250L
0.0069T
0.0098L
141
Table 73. Radial Ball, Spherical roller and cylindrical roller bearing HOUSING tolerances
Bearing O.D.
Nominal (Max.)
Over
Incl.
mm
in.
mm
in.
10.000
0.3937
Tolerance(1)
M6
M7
N6
N7
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
mm
in.
18.000
0.7087
-0.008
-0.0003
-0.004
-0.0002
18.000
0.7087
30.000
1.1811
-0.009
-0.0035
30.000
1.1811
50.000
1.9685
50.000
1.9685
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.015
-0.0006
0.015T
0.004L
0.0006T
0.0001L
0.000
0.0000
-0.004
-0.0002
-0.017
-0.0007
0.017T
0.005L
0.0007T
0.00015L
-0.011
-0.0045
-0.004
-0.0002
-0.020
-0.0008
80.000
3.1496
-0.013
-0.0005
-0.005
-0.0002
80.000
3.1496
120.000
4.7244
-0.015
-0.0006
120.000
4.7244
150.000
5.9055
150.000
5.9055
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.018
-0.0007
0.018T
0.008L
0.0007T
0.0003L
-0.009
-0.0004
0.000
0.0000
-0.021
-0.0008
0.021T
0.009L
0.0008T
0.0035L
0.020T
0.007L
0.0008T
0.00025L
0.000
0.0000
-0.025
-0.0010
-0.024
-0.0009
0.024T
0.008L
0.0009T
0.0003L
0.000
0.0000
-0.006
-0.0002
-0.028
-0.0011
0.028T
0.009L
0.0011T
0.0004L
-0.018
-0.0007
-0.008
-0.0003
-0.033
-0.0013
180.000
7.0866
-0.025
-0.0010
-0.008
-0.0003
180.000
7.0866
250.000
9.8425
-0.030
-0.0012
250.000
9.8425
315.000
12.4016
315.000
12.4016
Fit
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.020
-0.0008
0.020T
0.001T
0.0008T
0.0001T
-0.005
-0.0002
-0.023
-0.0009
0.023T
0.003L
0.0009T
0.0001L
-0.007
-0.0004
-0.028
-0.0009
0.024T
0.002T
0.0009T
0.00005T
-0.007
-0.0003
-0.028
-0.0011
0.028T
0.002L
0.0011T
0.00005L
0.025T
0.011L
0.0010T
0.00045L
-0.012
-0.0005
-0.028
-0.0011
0.028T
0.001T
0.0011T
0.00005T
-0.008
-0.0003
-0.033
-0.0013
0.033T
0.003L
0.0013T
0.00015L
-0.030
-0.0012
0.030T
0.013L
0.0012T
0.0005L
-0.014
-0.0006
-0.033
-0.0013
0.033T
0.001T
0.0013T
0.0001T
-0.009
-0.0004
-0.039
-0.0015
0.039T
0.004L
0.0015T
0.0001L
0.000
0.0000
-0.035
-0.0014
0.035T
0.015L
0.0014T
0.0006L
-0.016
-0.0006
-0.038
-0.0015
0.038T
0.001T
0.0015T
0.0000T
-0.010
-0.0004
-0.045
-0.0018
0.045T
0.005L
0.0018T
0.0002L
0.033T
0.010L
0.0013T
0.0004L
0.000
0.0000
-0.040
-0.0016
0.040T
0.018L
0.0016T
0.0007L
-0.020
-0.0008
-0.045
-0.0018
0.045T
0.002T
0.0018T
0.0001T
-0.012
-0.0005
-0.052
-0.0020
0.061T
0.018L
0.0020T
0.0002L
-0.033
-0.0013
0.033T
0.017L
0.0013T
0.0007L
0.000
0.0000
-0.040
-0.0016
0.040T
0.025L
0.0016T
0.0010L
-0.020
-0.0008
-0.045
-0.0018
0.045T
0.005T
0.0018T
0.0002T
-0.012
-0.0005
-0.052
-0.0020
0.052T
0.013L
0.0020T
0.0005L
-0.008
-0.0003
-0.037
-0.0015
0.037T
0.022L
0.0015T
0.0009L
0.000
0.0000
-0.046
-0.0018
0.046T
0.030L
0.0018T
0.0012L
-0.022
-0.0009
-0.051
-0.0020
0.051T
0.008T
0.0020T
0.0003T
-0.014
-0.0006
-0.060
-0.0024
0.060T
0.016L
0.0024T
0.0006L
-0.035
-0.0014
-0.009
-0.0004
-0.041
-0.0016
0.041T
0.026L
0.0016T
0.0010L
0.000
0.0000
-0.052
-0.0020
0.052T
0.035L
0.0020T
030014L
-0.025
-0.0010
-0.057
-0.0022
0.057T
0.010T
0.0022T
0.0004T
-0.014
-0.0006
-0.066
-0.0026
0.066T
0.021L
0.0025T
0.0008L
400.000
15.7480
-0.040
-0.0016
-0.010
-0.0004
-0.046
-0.0018
0.046T
0.030L
0.0018T
0.0012L
0.000
0.0000
-0.057
-0.0022
0.057T
0.040L
0.0022T
0.0016L
-0.026
-0.0006
-0.062
-0.0029
0.062T
0.014T
0.0024T
0.0006T
-0.016
-0.0006
-0.073
-0.0029
0.073T
0.024L
0.0029T
0.0010L
400.000
15.7480
500.000
19.6850
-0.045
-0.0018
-0.010
-0.0004
-0.050
-0.0020
0.050T
0.035L
0.0020T
0.0014L
0.000
0.0000
-0.063
-0.0025
0.063T
0.045L
0.0025T
0.0018L
-0.027
-0.0011
-0.067
-0.0026
0.067T
0.018T
0.0026T
0.0007T
-0.017
-0.0007
-0.080
-0.0031
0.080T
0.028L
0.0031T
0.0011L
500.000
19.6850
630.000
24.8032
-0.050
-0.0020
-0.026
-0.0010
-0.070
-0.0028
0.070T
0.024L
0.0028T
0.0010L
-0.026
-0.0010
-0.096
-0.0038
0.096T
0.024L
0.0038T
0.0010L
-0.044
-0.0017
-0.088
-0.0035
0.088T
0.006T
0.0035T
0.0003T
-0.044
-0.0017
-0.114
-0.0045
0.114T
0.006L
0.0045T
0.0003L
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing O.D.
(1)Tolerance range is from +0 to value listed.
142
P6
P7
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
-0.015
-0.0006
Fit
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.026
-0.0010
0.026T
0.007T
0.0010T
0.0003T
-0.011
-0.0004
-0.029
-0.0011
0.029T
0.003T
0.0011T
0.0001T
-0.018
-0.0007
-0.031
-0.0012
0.031T
0.009T
0.0012T
0.00035T
-0.014
-0.0006
-0.035
-0.0014
0.035T
0.005T
0.0014T
0.0025T
-0.021
-0.0008
-0.037
-0.0015
0.037T
0.010T
0.0015T
0.00035T
-0.017
-0.0007
-0.042
-0.0017
0.042T
0.006T
0.0017T
0.0025T
-0.026
-0.0010
-0.045
-0.0018
0.045T
0.013T
0.0018T
0.0005T
-0.021
-0.0008
-0.051
-0.0020
0.051T
0.008T
0.0020T
0.0003T
-0.030
-0.0012
-0.052
-0.0020
0.052T
0.015T
0.0020T
0.0006T
-0.024
-0.0009
-0.059
-0.0023
0.059T
0.009T
0.0023T
0.0003T
-0.036
-0.0014
-0.061
-0.0024
0.061T
0.018T
0.0024T
0.0007T
-0.028
-0.0011
-0.068
-0.0027
0.068T
0.010T
0.0027T
0.0004T
-0.036
-0.0014
-0.061
-0.0024
0.061T
0.011T
0.0024T
0.0004T
-0.028
-0.0011
-0.068
-0.0027
0.068T
0.003T
0.0027T
0.0001T
-0.041
-0.0016
-0.070
-0.0028
0.070T
0.011T
0.0028T
0.0004T
-0.033
-0.0013
-0.079
-0.0031
0.079T
0.003T
0.0031T
0.0001T
-0.047
-0.0019
-0.079
-0.0031
0.079T
0.012T
0.0031T
0.0005T
-0.036
-0.0014
-0.088
-0.0035
0.088T
0.001T
0.0035T
0.0000T
-0.051
-0.0020
-0.087
-0.0034
0.087T
0.011T
0.0034T
0.0004T
-0.041
-0.0016
-0.0039
-0.055
-0.0022
-0.095
-0.0037
0.095T
0.010T
0.0037T
0.0004T
-0.045
-0.0018
-0.108
-0.0043
0.108T
0.000T
0.0043T
0.0000T
-0.078
-0.0031
-0.122
-0.0048
0.122T
0.028T
0.0048T
0.0011T
-0.078
-0.0031
-0.148
-0.0058
0.148T
0.028T
0.0058T
0.0011T
-0.098
0.098T
0.001T
0.0039T
0.0000T
143
Table
73. Radial Ball, Spherical roller and cylindrical roller bearing HOUSING tolerances
Table 73 continued.
Bearing O.D.
Nominal (Max.)
Over
Incl.
mm
in.
mm
in.
630.000
24.8032
Tolerance(1)
M6
M7
N6
N7
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
mm
in.
800.000
31.4961
-0.075
-0.0030
-0.030
-0.0012
800.000 1000.000
31.4961 39.3701
-0.100
-0.0039
1000.000 1250.000
39.3701 49.2126
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.080
-0.0031
0.080T
0.045L
0.0031T
0.0018L
-0.030
-0.0012
-0.034
-0.0013
-0.090
-0.0035
0.090T
0.066L
0.0035T
0.0026L
-0.125
-0.0049
-0.040
-0.0016
-0.106
-0.0042
1250.000 1600.000
49.2126 62.9921
-0.160
-0.0063
-0.048
-0.0019
1600.000 2000.000
62.9921 78.7402
-0.200
-0.0079
2000.000 2500.000
78.7402 98.4252
-0.250
-0.0098
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.110
-0.0043
0.110T
0.045L
0.0043T
0.0018L
-0.050
-0.0020
-0.034
-0.0013
-0.124
-0.0049
0.124T
0.066L
0.0049T
0.0026L
0.106T
0.085L
0.0042T
0.0033L
-0.040
-0.0016
-0.145
-0.0057
-0.126
-0.0050
0.126T
0.112L
0.0050T
0.0044L
-0.048
-0.0019
-0.058
-0.0023
-0.150
-0.0059
0.150T
0.142L
0.0059T
0.0056L
-0.068
-0.0027
-0.178
-0.0070
0.178T
0.182L
0.0070T
0.0071L
144
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.100
-0.0039
0.100T
0.025T
0.0039T
0.0010T
-0.050
-0.0020
-0.130
-0.0051
0.130T
0.025L
00051T
0.0010L
-0.056
-0.0022
-0.112
-0.0044
0.112T
0.044T
0.0044T
0.0017T
-0.056
-0.0022
-0.146
-0.0057
0.146T
0.044L
0.0057T
0.0017L
0.145T
0.085L
0.0057T
0.0033L
-0.066
-0.0026
-0.132
-0.0052
0.132T
0.059T
0.0052T
0.0023T
-0.066
-0.0026
-0.171
-0.0067
0.171T
0.059L
0.0067T
0.0023L
-0.173
-0.0068
0.173T
0.112L
0.0068T
0.0044L
-0.078
-0.0031
-0.156
-0.0061
0.156T
0.082T
0.0061T
0.0032T
-0.078
-0.0031
-0.203
-0.0080
0.203T
0.082L
0.0080T
0.0023L
-0.058
-0.0023
-0.208
-0.0082
0.208T
0.142L
0.0082T
0.0056L
-0.092
-0.0036
-0.184
-0.0072
0.184T
0.108T
0.0072T
0.0043T
-0.092
-0.0036
-0.242
-0.0095
0.242T
0.108L
0.0095T
0.0043L
-0.068
-0.0027
-0.243
-0.0096
0.243
0.182L
0.0096T
0.0071L
-0.110
-0.0043
-0.220
-0.0087
0.285T
0.140T
0.112T
0.055T
-0.110
-0.0043
-0.285
-0.0112
0.285T
0.140L
0.0112T
0.0055L
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing O.D.
(1)Tolerance range is from +0 to value listed.
Fit
P6
P7
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
-0.088
-0.0035
Fit
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.138
-0.0054
0.138T
0.013T
0.0054T
0.0005T
-0.088
-0.0035
-0.168
-0.0066
0.168T
0.013T
0.0066T
0.0005T
-0.100
-0.0039
-0.156
-0.0061
0.156T
0.000T
0.0061T
0.0000T
-0.100
-0.0039
-0.190
-0.0075
0.190T
0.000T
0.0075T
0.0000T
-0.120
-0.0047
-0.186
-0.0073
0.186T
0.005L
0.0073T
0.0002L
-0.120
-0.0047
-0.225
-0.0089
0.225T
0.005T
0.0089T
0.0002T
-0.140
-0.0055
-0.218
-0.0086
0.218T
0.020L
0.0086T
0.0008L
-0.140
-0.0055
-0.265
-0.0104
0.265T
0.020L
0.0104T
0.0008L
-0.170
-0.0067
-0.262
-0.0103
0.262T
0.030L
0.0103T
0.0012L
-0.170
-0.0067
-0.320
-0.0126
0.320T
0.030L
0.0126T
0.0012L
-0.195
-0.0077
-0.305
-0.0120
0.305T
0.055L
0.0120T
0.0021L
-0.195
-0.0077
-0.370
-0.0146
0.370T
0.055L
0.0146T
0.0021L
145
146
Tolerance
Ground Seat
Heavy Loads,
High Speed or Shock
Inner Ring
Seat
Deviation
Resultant
Fit
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
18.000
0.7087
-0.012
0.000
-0.0005
0.0000
+0.018
+0.007
+0.0007
+0.0003
0.030T
0.007T
0.0012T
0.0003T
m6
+0.023
+0.012
+0.0009
+0.0005
0.035T
0.012T
0.0014T
0.0005T
n6
18.000
0.7087
30.000
1.1811
-0.012
0.000
-0.0005
0.0000
+0.021
0.008
+0.0008
+0.0003
0.033T
0.008T
0.0013T
0.0003T
m6
+0.028
+0.015
+0.0011
+0.0006
0.040T
0.015T
0.0016T
0.0006T
n6
30.000
1.1811
50.000
1.9685
-0.012
0.000
-0.0005
0.0000
+0.025
+0.009
+0.0010
+0.0004
0.037T
0.009T
0.0015T
0.0004T
m6
+0.033
+0.017
+0.0013
+0.0007
0.045T
0.017T
0.0018T
0.0007T
n6
50.000
1.9685
80.000
3.1496
-0.015
0.000
-0.0006
0.0000
+0.030
+0.011
+0.0012
+0.0004
0.045T
0.011T
0.0018T
0.0004T
m6
+0.039
+0.020
+0.0015
+0.0008
0.054T
0.020T
0.0021T
0.0008T
n6
80.000
3.1496
120.000
4.7244
-0.020
0.000
-0.0008
0.0000
+0.035
+0.013
+0.0014
+0.0005
0.055T
0.013T
0.0022T
0.0005T
m6
+0.045
+0.023
+0.0019
+0.0010
0.065T
0.023T
0.0027T
0.0010T
n6
120.000
4.7244
180.000
7.0866
-0.025
0.000
-0.0010
0.0000
+0.052
+0.027
+0.0020
+0.0011
0.077T
0.027T
0.0030T
0.0011T
n6
+0.068
+0.043
+0.0027
+0.0017
0.093T
0.043T
0.0037T
0.0017T
p6
180.000
7.0866
200.000
7.8740
+0.106
+0.077
+0.0042
+0.0030
0.136T
0.077T
0.0054T
0.0030T
200.000
7.8740
225.000
8.8583
+0.109
+0.080
+0.0043
+0.0031
0.139T
0.080T
0.0055T
0.0031T
225.000
8.8583
250.000
9.8425
+0.113
+0.084
0.0044
+0.0033
0.143T
0.084T
0.0056T
0.0033T
250.000
9.8425
280.000
11.0236
+0.146
+0.094
+0.0057
+0.0037
0.181T
0.094T
0.0071T
0.0037T
280.000
11.0236
315.000
12.4016
+0.150
+0.098
+0.0059
+0.0039
0.185T
0.098T
0.0073T
0.0039T
Over
Incl.
mm
in.
mm
in.
10.000
0.3937
-0.030
0.000
-0.0012
0.0000
-0.035
0.000
-0.0014
0.0000
+0.060
+0.031
+0.0024
+0.0012
+0.066
+0.033
+0.0026
+0.0013
0.090T
0.031T
0.0035T
0.0012T
0.101T
0.033T
0.0040T
0.0013T
Symbol
n6
n6
Symbol
r6
r7
Ground Seat
Unground Seat
Wheel Spindles
Inner Ring
Seat
Deviation
Resultant
Fit
Inner Ring
Seat
Deviation
Resultant
Fit
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
-0.011
0.0000
-0.0004
0.012T
0.011L
0.0005T
0.0004L
h6
-0.006
-0.017
-0.0002
-0.0007
0.006T
0.017L
0.0002T
0.0007L
g6
-0.006
-0.017
-0.00025
-0.00065
0.006T
0.017L
-0.00025T
0.00065L
g6
-0.016
-0.027
-0.0006
-0.0011
0.004L
0.027L
0.0002L
0.0011L
f6
0.000
-0.013
0.0000
-0.0005
0.012T
0.013L
0.0005T
0.0005L
h6
-0.007
-0.020
-0.0003
-0.0008
0.005T
0.020L
0.0002T
0.0008L
g6
-0.007
-0.020
-0.0003
-0.0008
0.005T
0.020L
0.0002T
0.0008L
g6
-0.020
-0.033
-0.0008
-0.0013
0.008L
0.033L
0.0003L
0.0013L
f6
0.000
-0.016
0.0000
-0.0006
0.012T
0.016L
0.0005T
0.0006L
h6
-0.009
-0.025
-0.0004
-0.0010
0.003T
0.025L
0.0001T
0.0010L
g6
-0.009
-0.025
-0.0004
-0.0010
0.003T
0.025L
0.0001T
0.0010L
g6
-0.025
-0.041
-0.0010
-0.0016
0.013L
0.041L
0.0005L
0.0016L
f6
0.000
-0.019
0.0000
-0.0007
0.015T
0.019L
0.0006T
0.0007L
h6
-0.010
-0.029
-0.0004
-0.0011
0.005T
0.029L
0.0002T
0.0011L
g6
-0.010
-0.029
-0.0004
-0.0011
0.005T
0.029L
0.0002T
0.0011L
g6
-0.030
-0.049
-0.0012
-0.0019
0.015L
0.049L
0.0006L
0.0019L
f6
0.000
-0.022
0.0000
-0.0009
0.020T
0.022L
0.0008T
0.0009L
h6
-0.012
-0.034
-0.0005
-0.0014
0.008T
0.034L
0.0003T
0.0014L
g6
-0.012
-0.034
-0.0005
-0.0014
0.008T
0.034L
0.0003T
0.0014L
g6
-0.036
-0.058
-0.0014
-0.0023
0.016L
0.058L
0.0006L
0.0023L
f6
0.000
-0.025
0.0000
-0.0010
0.025T
0.025L
0.0010T
0.0010L
h6
-0.014
-0.039
-0.0006
-0.0016
0.011T
0.039L
0.0004T
0.0016L
g6
-0.014
-0.039
-0.0006
-0.0016
0.011T
0.039
0.0004T
0.0016L
g6
-0.043
-0.068
-0.0016
-0.0026
0.018L
0.068L
0.0006L
0.0026L
f6
0.000
-0.029
0.0000
-0.0011
0.030T
0.029L
0.0012T
0.0011L
h6
-0.015
-0.044
-0.0006
-0.0017
0.015T
0.044L
0.0006T
0.0017L
g6
-0.015
-0.044
-0.0006
-0.0017
0.015T
0.044L
0.0006T
0.0017L
g6
-0.050
-0.079
-0.0020
-0.0031
0.020L
0.079L
0.0008L
0.0031L
f6
0.000
-0.032
0.0000
-0.0012
0.035T
0.032L
0.0014T
0.0012L
h6
-0.017
-0.049
-0.0007
-0.0019
0.018T
0.049L
0.0007T
0.0019L
g6
-0.017
-0.049
-0.0007
-0.0019
0.018T
0.049L
0.0007T
0.0019L
g6
-0.056
-0.068
-0.0022
-0.0027
0.021L
0.088L
0.0008L
0.0035L
f6
Symbol
Symbol
Symbol
Symbol
147
Inner Ring
Industrial Equipment
Classes K and N (Metric)
148
Tolerance
Over
Incl.
mm
in.
mm
in.
315.000
12.4016
355.000
13.9764
355.000
13.9764
400.000
15.7480
400.000
15.7580
450.000
17.7165
450.000
17.7165
500.000
19.6850
500.000
29.6850
mm
in.
-0.040
0.000
-0.0016
0.0000
Ground Seat
Heavy Loads,
High Speed or Shock
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
+0.073
+0.037
+0.0029
+0.0015
0.113T
0.037T
0.0044T
0.0015T
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
+0.165
+0.108
+0.0065
+0.0043
0.205T
0.108T
0.0081T
0.0043T
+0.171
+0.114
+0.0067
+0.0045
0.211T
0.114T
0.0083T
0.0045T
+0.189
+0.126
+0.0074
+0.0092
0.234T
0.126T
0.0092T
0.0050T
+0.195
+0.132
+0.0077
+0.0052
0.240T
0.132T
0.0094T
0.0052T
+0.200
+0.125
+0.0079
+0.0049
0.250T
0.125T
0.0098T
0.0049T
0.305T
0.105T
0.0102T
0.0041T
0.375T
0.175T
0.0148T
0.0069T
Symbol
n6
-0.045
0.000
-0.0018
0.0000
+0.080
+0.040
+0.0031
+0.0016
0.0125T
0.040T
0.0049T
0.0016T
630.000
24.8032
-0.050
0.000
-0.0020
0.0000
+0.100
+0.050
+0.0039
+0.0020
0.150T
0.050T
0.0059T
0.0020T
630.000
24.8032
800.000
31.4961
-0.080
0.000
-0.0031
0.0000
+0.125
+0.050
+0.0049
+0.0020
0.205T
0.050T
0.0081T
0.0020T
+0.225
+0.150
+0.0089
+0.0059
800.000
31.4961
1000.000
39.3701
-0.100
0.000
-0.0039
0.0000
+0.150
+0.050
+0.0059
+0.0020
0.250T
0.050T
0.0098T
0.0020T
+0.275
+0.175
+0.0108
+0.0069
n6
Symbol
r7
r7
Ground Seat
Unground Seat
Wheel Spindles
Inner Ring
Seat
Deviation
Resultant
Fit
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
0.000
-0.036
0.0000
-0.0014
0.040T
0.036L
0.0016T
0.0014L
h6
-0.018
-0.075
-0.0007
-0.0030
0.022T
0.075L
0.0009T
0.0030L
0.000
-0.040
0.0000
-0.0020
0.045T
0.040L
0.0018T
0.0016L
h6
-0.020
-0.083
-0.0008
-0.0033
0.025T
0.083L
0.0008T
0.0033L
0.000
-0.050
0.0000
-0.0020
0.050T
0.050L
0.0020T
0.0020L
-0.050
-0.100
-0.0020
-0.0039
0.000
0.100L
0.0000
0.0039L
0.000
-0.075
0.0000
-0.0030
0.080T
0.075L
0.0031T
0.0030L
-0.080
-0.150
-0.0031
-0.0059
0.000
-0.100
0.0000
-0.0039
0.100T
0.100L
0.0039T
0.0039L
-0.100
-0.200
-0.0039
-0.0079
Symbol
Inner Ring
Seat
Deviation
Resultant
Fit
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
g7
-0.018
-0.075
-0.0007
-0.0029
0.022T
0.075L
0.0009T
0.0029L
g7
g7
-0.020
-0.083
-0.0008
-0.0033
0.025T
0.083L
0.0008T
0.0033L
g7
-0.050
-0.100
-0.0020
-0.0039
0.000
0.100L
0.0000
0.0039L
0.000
0.150L
0.0000
0.0059L
-0.080
-0.150
-0.0031
-0.0059
0.000
0.150L
0.0000
0.0059L
0.000
0.200L
0.0000
0.0079L
-0.100
-0.200
-0.0039
-0.0079
0.000
0.200L
0.0000
0.0079L
Symbol
Symbol
Symbol
149
Outer Ring
Industrial Equipment
Classes K and N (Metric)
Table 75. Tapered Roller Bearings outer Ring Industrial Equipment Classes K and N (Metric)
Outer Ring O.D.
Range
Tolerance
Stationary Cup
Rotating Cup
Adjustable
Nonadjustable or in Carriers or
Sheaves - Clamped
Floating or Clamped
Outer Ring
Resultant
Seat
Fit
Deviation
Symbol
Outer Ring
Resultant
Seat
Fit
Deviation
Nonadjustable or in Carriers
Symbol
Outer Ring
Resultant
Seat
Fit
Deviation
Symbol
Outer Ring
Resultant
Seat
Fit
Deviation
Symbol
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
18.000
0.7087
30.000
1.1811
0.000
-0.012
0.0000
-0.0005
+0.007
+0.028
+0.0003
+0.0011
0.007L
0.040L
0.0003L
0.0016L
G7
-0.009
+0.012
-0.0004
+0.0005
0.009T
0.024L
0.0004T
0.0009L
J7
-0.035
-0.014
-0.0014
-0.0005
0.035T
0.002T
0.0014T
0.0001T
P7
-0.041
-0.020
-0.0016
-0.0009
0.041T
0.008T
0.0016T
0.0003T
R7
30.000
1.1811
50.000
1.9685
0.000
-0.014
0.0000
-0.0006
+0.009
+0.034
+0.0004
+0.0013
0.009L
0.048L
0.0004L
0.0019L
G7
-0.011
+0.014
-0.0004
+0.0006
0.011T
0.028L
0.0004T
0.0011L
J7
-0.042
-0.017
-0.0017
-0.0007
0.042T
0.003T
0.0017T
0.0001T
P7
-0.050
-0.025
-0.0020
-0.0010
0.050T
0.011T
0.0020T
0.0004T
R7
50.000
1.9685
65.000
2.5591
-0.060
-0.030
-0.0024
-0.0012
0.060T
0.014T
0.0024T
0.0006T
-0.062
-0.032
-0.0021
-0.0013
0.062T
0.016T
0.0024T
0.0006T
-0.073
-0.038
-0.0029
-0.0015
0.073T
0.020T
0.0029T
0.0008T
-0.076
-0.041
-0.0030
-0.0016
0.076T
0.023T
0.0030T
0.0009T
-0.088
-0.048
-0.0035
-0.0019
0.088T
0.028T
0.0035T
0.0011T
-0.090
-0.050
-0.0035
-0.0020
0.090T
0.030T
0.0035T
0.0012T
-0.090
-0.050
-0.0035
-0.0020
0.090T
0.025T
0.0035T
0.0010T
-0.093
-0.053
-0.0037
-0.0021
0.093T
0.028T
0.0037T
0.0011T
65.000
2.5591
80.000
3.1496
80.000
3.1496
100.000
3.9370
100.000
3.9370
120.000
4.7244
120.000
4.7244
140.000
5.5188
140.000
5.5188
150.000
5.9055
150.000
5.9055
160.000
6.2992
160.000
6.2992
180.000
7.0866
0.000
-0.016
0.0000
-0.0006
0.000
-0.018
0.0000
-0.0007
0.000
-0.020
0.0000
-0.0008
0.000
-0.025
0.0000
-0.0010
+0.010
+0.040
+0.0004
+0.0016
+0.012
+0.047
+0.0005
+0.0019
+0.014
+0.054
+0.0006
+0.0021
+0.014
+0.054
+0.0006
+0.0021
0.010L
0.056L
0.0004L
0.0022L
0.012L
0.065L
0.0005L
0.0026L
0.014L
0.074L
0.0006L
0.0029L
0.014L
0.079L
0.0006L
0.0031L
G7
G7
G7
G7
-0.012
+0.018
-0.0005
+0.0007
-0.013
+0.022
-0.0005
+0.0009
-0.014
+0.026
-0.0006
+0.0010
-0.014
+0.026
-0.0006
+0.0010
0.012T
0.034L
0.0005T
0.0013L
0.013T
0.040L
0.0005T
0.0016L
0.014T
0.046L
0.0006T
0.0018L
-0.014T
0.051L
0.0006T
0.0020L
J7
J7
J7
J7
-0.051
-0.021
-0.0020
-0.0008
-0.059
-0.024
-0.0023
-0.0009
-0.068
-0.028
-0.0027
-0.0011
-0.068
-0.028
-0.0027
-0.0011
0.051T
0.005T
0.0020T
0.0002T
0.059T
0.006T
0.0023T
0.0002T
0.068T
0.074T
0.0027T
0.0003T
0.068T
0.003T
0.0027T
0.0001T
P7
P7
P7
P7
R7
R7
R7
R7
150
Table 75 continued.
Tolerance
Over
Incl.
mm
in.
mm
in.
180.000
7.0866
200.000
7.8740
200.000
7.8740
225.000
8.8583
225.000
8.8583
250.000
9.8425
Rotating Cup
Adjustable
Nonadjustable or in Carriers or
Sheaves - Clamped
Floating or Clamped
Outer Ring
Resultant
Seat
Fit
Deviation
Symbol
250.000
9.8425
-0.113
-0.067
-0.0044
-0.0026
0.113T
0.037T
0.0044T
0.0015T
280.000
11.0236
-0.126
-0.074
-0.0050
-0.0029
0.126T
0.039T
0.0050T
0.0015T
-0.130
-0.078
-0.0051
-0.0031
0.130T
0.043T
0.0051T
0.0017T
-0.144
-0.087
-0.0057
-0.0034
0.144T
0.047T
0.0057T
0.0019T
-0.150
-0.093
-0.0059
-0.0037
0.150T
0.053T
0.0059T
0.0021T
-0.166
-0.103
-0.0065
-0.0041
0.166T
0.058T
0.0065T
0.0023T
-0.172
-0.109
-0.0068
-0.0043
0.172T
0.064T
0.0068T
0.0025T
0.190T
0.070T
0.0075T
0.0028T
R7
315.000
12.4016
315.000
12.4016
355.000
13.9764
355.000
13.9764
400.000
15.7480
400.000
15.7480
450.000
17.7165
0.000
-0.035
0.0000
-0.0014
0.000
-0.040
0.0000
-0.0016
+0.017
+0.069
+0.0007
+0.0027
+0.062
+0.098
+0.0024
+0.0039
0.017L
0.104L
0.0007L
0.0041L
0.062L
0.138L
0.0024L
0.0054L
0.000
-0.045
0.0000
-0.0018
+0.068
+0.095
+0.0027
+0.0037
0.068L
0.140L
0.0027L
0.0055L
450.000
17.7165
500.000
19.6850
500.000
19.6850
630.000
24.8032
0.000
-0.050
0.0000
-0.0020
+0.065
+0.115
+0.0026
+0.0045
0.065L
0.165L
0.0026L
0.0065L
630.000
24.8032
800.000
31.4961
0.000
-0.080
0.0000
-0.0031
+0.075
+0.150
+0.0030
+0.0059
0.075L
0.225L
0.0030L
0.0089L
800.000
31.4961
1000.000
39.3701
0.000
-0.100
0.0000
-0.0039
+0.075
+0.175
+0.0030
+0.0069
0.075L
0.275L
0.0030L
0.0108L
G7
G7
F6
-0.016
+0.036
-0.0006
+0.0013
-0.018
+0.039
-0.0007
+0.0015
0.016T
0.071L
0.0006T
0.0028L
0.018T
0.079L
0.0007T
0.0031L
F5
-0.020
+0.043
-0.0008
+0.0017
0.020T
0.088L
0.0008T
0.0035L
-0.022
+0.046
-0.0009
+0.0018
0.022T
0.096L
0.0009T
0.0038L
-0.025
+0.050
-0.0098
+0.0020
0.025T
0.130L
0.0098T
0.0051L
-0.025
+0.075
-0.0098
+0.0030
0.025T
0.175L
0.0098T
0.0069L
J7
J7
J7
-0.079
-0.033
-0.0031
-0.0014
-0.088
-0.036
-0.0035
-0.0014
-0.098
-0.041
-0.0039
-0.0016
mm
in.
Outer Ring
Resultant
Seat
Fit
Deviation
0.109T
0.033T
0.0043T
0.0013T
0.016T
0.060L
0.0006T
0.0024L
mm
in.
Symbol
-0.109
-0.063
-0.0043
-0.0025
-0.016
+0.030
-0.00076
+0.0012
mm
in.
Outer Ring
Resultant
Seat
Fit
Deviation
0.106T
0.030T
0.0042T
0.0012T
0.015L
0.091L
0.0006L
0.0036L
mm
in.
Symbol
-0.106
-0.060
-0.0042
-0.0024
+0.015
+0.061
+0.0006
+0.0024
mm
in.
Outer Ring
Resultant
Seat
Fit
Deviation
mm
in.
0.000
-0.030
0.0000
-0.0012
mm
in.
Symbol
Nonadjustable or in Carriers
mm
in.
280.000
11.0236
mm
in.
Stationary Cup
0.079T
0.003T
0.0031T
0.0001T
0.088T
0.001T
0.0035T
0.0000
0.098T
0.001T
0.0039T
0.0001T
P7
P7
P7
R7
R7
R7
J7
-0.108
-0.045
-0.0043
-0.0018
0.108T
0.000
0.0043T
0.0000
-0.118
-0.050
-0.0046
-0.0020
0.118T
0.000
0.0046T
0.0000
-0.190
-0.120
-0.0075
-0.0047
-0.150
-0.075
-0.0059
-0.0030
0.150T
0.000
0.0059T
0.0000
R7
-0.200
-0.100
-0.0079
-0.0039
0.200T
0.000
0.0079T
0.0000
R7
P7
R7
151
Inner ring
Industrial Equipment
Classes 4 and 2 (Inch)
Table 76. Tapered Roller Bearings Inner Ring Industrial Equipment Classes 4 and 2 (Inch)
Inner Ring Bore
Range
Rotating or
Stationary Inner Ring
Ground Seat
Unground or
Ground Seat
Heavy Loads, or
Tolerance(1) Constant Loads With
Moderate Shock High Speed Or Shock
Ground Seat
Unground Seat
Hardened and
Ground Seat
Moderate Loads,
No Shock
Moderate Loads,
No Shock
Sheaves,
Wheels, Idlers
Wheel Spindles
Inner Ring
Inner Ring
Inner Ring
Inner Ring
Inner Ring
Inner Ring
Resultant
Resultant
Resultant
Resultant
Resultant
Resultant
Seat
Seat
Seat
Seat
Seat
Seat
Fit
Fit
Fit
Fit
Fit
Fit
Deviation
Deviation
Deviation
Deviation
Deviation
Deviation
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
76.200
3.0000
0.000
+0.013
0.0000
+0.0005
+0.038(2)
+0.026
+0.0015
+0.0010
0.038T
0.012T
0.0015T
0.0005T
+0.064
+0.038
+0.0025
+0.0015
0.064T
0.025T
0.0025T
0.0010T
+0.013
0.000
+0.0005T
0.0000
0.013T
0.013L
0.0005T
0.0005L
0.000
-0.013
0.0000
-0.0005
0.000
0.026L
0.0000
0.0010L
0.000
-0.013
0.0000
-0.0005
0.000
0.026L
0.0000
0.0010L
-0.005
-0.018
-0.0002
-0.0007
0.005L
0.031L
0.0002L
0.0012L
76.200
3.0000
304.800
12.0000
0.000
+0.025
0.0000
+0.0010
+0.064
+0.038
+0.0025
+0.0015
0.064T
0.013T
0.0025T
0.0005T
+0.025
0.000
+0.0010
0.0000
0.025T
0.025L
0.0010T
0.0010L
0.000
-0.025
0.0000
-0.0010
0.000
0.051L
0.0000
0.0020L
0.000
-0.025
0.0000
-0.0010
0.000
0.051L
0.0000
0.0020L
-0.005
-0.031
-0.0002
-0.0012
0.005L
0.056L
0.0002L
0.0022L
304.800 609.600
12.0000 24.0000
0.000
+0.051
0.0000
+0.0020
+0.127
+0.076
+0.0050
+0.0030
0.127T
0.025T
0.0050T
0.0010T
+0.051
0.000
+0.0020
0.0000
0.051T
0.051L
0.0020T
0.0020L
0.000
-0.051
0.0000
-0.0020
0.000
0.102L
0.0000
0.0040L
0.000
-0.051
0.0000
-0.0020
0.000
0.102L
0.0000
0.0040L
609.600 914.400
24.0000 36.0000
0.000
+0.076
0.0000
+0.0030
+0.191
+0.114
+0.0075
+0.0015T
+0.076
0.000
+0.0030
0.0000
0.076T
0.076L
0.0030T
0.0030L
0.000
-0.076
0.0000
-0.0030
0.000
0.152L
0.0000
0.0060L
0.000
-0.076
0.0000
-0.0030
0.000
0.152L
0.0000
0.0060L
(2)Example: If the minimum inner ring bore is 76.200 mm (3.0000 in.) the suggested shaft size = 76.238 mm (3.0015 in.) to 76.225 mm (3.0010 in.)
for an inner ring fit of 0.038 mm (0.0015 in.) tight to 0.012 mm (0.0005 in.) tight.
(3)For inner ring bores between 76.200 mm (3.0000 in.) and 101.600 mm (4.0000 in.) use a minimum fit of 0.025 mm (0.0001 in.) tight.
152
Outer Ring
Industrial Equipment
Classes 4 and 2 (Inch)
Table 77. Tapered Roller Bearings outer Ring Industrial Equipment Classes 4 and 2 (Inch)
Outer Ring O.D.
Range
Floating or Clamped
Adjustable
Stationary Or Rotating
Outer Ring
Non-adjustable or In Carriers,
Sheaves - Clamped
Sheaves - Unclamped(1)
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant Fit
Outer Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
76.200
3.0000
+0.025
0.000
+0.0010
0.0000
+0.050
+0.076
+0.0020
+0.0030
0.026L
0.076L
0.0010L
0.0030L
0.000
+0.025
0.0000
+0.0010
0.025T
0.025L
0.0010T
0.0010L
-0.039
-0.013
-0.0015
-0.0005
0.064T
0.013T
0.0025T
0.0005T
-0.077
-0.051
-0.0030
-0.0020
0.102T
0.051T
0.0040T
0.0020T
76.200
3.0000
127.000
5.0000
+0.025
0.000
+0.0010
0.0000
+0.050
+0.076
+0.0020
+0.0030
0.026L
0.076L
0.0010L
0.0030L
0.000
+0.025
0.0000
+0.0010
0.025T
0.025L
0.0010T
0.0010L
-0.051
-0.025
-0.0020
-0.0010
0.076T
0.025T
0.0030T
0.0010T
-0.077
-0.051
-0.0030
-0.0020
0.102T
0.051T
0.0040T
0.0020T
127.000
5.0000
304.800
12.0000
+0.025
0.000
+0.0010
0.0000
+0.050
+0.076
+0.0020
+0.0030
0.026L
0.076L
0.0010L
0.0030L
0.000
+0.051
0.0000
+0.0020
0.025T
0.051L
0.0010T
0.0020L
-0.051
-0.025
-0.0020
-0.0010
0.076T
0.025T
0.0030T
0.0010T
-0.077
-0.051
-0.0030
-0.0020
0.102T
0.051T
0.0040T
0.0020T
304.800
12.0000
609.600
24.0000
+0.051
0.000
+0.0020
0.0000
+0.102
+0.152
+0.0040
+0.0060
0.051L
0.152L
0.0020L
0.0060L
+0.026
+0.076
+0.0010
+0.0030
0.025T
0.076L
0.0010T
0.0030L
-0.076
-0.025
-0.0030
-0.0010
0.127T
0.025T
0.0050T
0.0010T
-0.102
-0.051
-0.0040
-0.0020
0.153T
0.051T
0.0060T
0.0020T
609.600
24.0000
914.400
36.0000
+0.076
0.000
+0.0030
0.0000
+0.152
+0.229
+0.0060
+0.0090
0.076L
0.229L
0.0030L
0.0090L
+0.051
+0.127
+0.0020
+0.0050
0.025T
0.0127L
0.0010T
0.0050L
-0.102
-0.025
-0.0040
-0.0010
0.178T
0.025T
0.0070T
0.0010T
Over
Incl.
mm
in.
mm
in.
0.000
0.0000
(1)Unclamped outer ring design is applicable only to sheaves with negligible fleet angle.
153
Inner ring
Automotive Equipment
Class 4 and 2 (Inch)
Deviation from nominal (minimum)
bearing bore and resultant fit.
T= Tight
L = Loose
Rear Wheels
(Unit-Bearing)
(Semi-Floating Axles)
Non-adjustable
Shaft O.D.
Deviation
Resultant
Fit
Shaft O.D.
Deviation
Resultant
Fit
Shaft O.D.
Deviation
Resultant
Fit
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
76.200
3.0000
0.000
+0.0013
0.0000
+0.0005
-0.005
-0.018
-0.0002
-0.0007
0.005L
0.031L
0.0002L
0.0012L
+0.051
+0.038
+0.0020
+0.0015
0.051T
0.025T
0.0020T
0.0010T
+0.056
+0.038
+0.0022
+0.0015
0.056T
0.025T
0.0022T
0.0010T
76.200
3.0000
304.800
12.0000
0.000
+0.0025
0.0000
+0.0010
-0.0013
-0.038
-0.0050
-0.0015
0.013L
0.063L
0.0005L
0.0025L
+0.076
+0.051
+0.0030
+0.0020
0.076T
0.026T
0.0030T
0.0010T
Outer Ring
Automotive Equipment
Classes 4 and 2 (Inch)
Housing Bore
Rotating Outer Ring
Front
Wheels
Rear Wheels
(Full-Floating
Trailer Wheels)
Non-adjustable
154
Housing Bore
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
76.200
3.0000
+0.025
0.000
+0.0010
0.0000
-0.051
-0.013
-0.0020
-0.0005
0.076T
0.013T
0.0030T
0.0005T
76.200
3.0000
127.000
5.0000
+0.025
0.000
+0.0010
0.0000
-0.077
-0.025
-0.0030
-0.0010
0.102T
0.025T
0.0040T
0.0010T
127.000
5.0000
304.800
12.0000
+0.025
0.000
+0.0010
0.0000
-0.077
-0.025
-0.0030
-0.0010
0.102T
0.025T
0.0040T
0.0010T
Over
Incl.
mm
in.
mm
in.
0.000
0.0000
Shaft O.D.
Rotating Inner Ring
Pinion
Clamped
Transaxles
Transmissions
Transfer Cases
Cross Shafts
Differential
Collapsible Spacer
Non-adjustable
Non-adjustable
Non-adjustable
Shaft O.D.
Deviation
Resultant
Fit
Shaft O.D.
Deviation
Resultant
Fit
Shaft O.D.
Deviation
Resultant
Fit
Shaft O.D.
Deviation
Resultant
Fit
Shaft O.D.
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
+0.025
+0.013
+0.0010
+0.0005
0.025T
0.000
0.0010T
0.0000
+0.030
+0.018
+0.0012
+0.0007
0.030T
0.005T
0.0012T
0.0002T
+0.051
+0.038
+0.0020
+0.0015
0.051T
0.025T
0.0020T
0.0010T
+0.102
+0.064
+0.0040
+0.0025
0.102T
0.051T
0.0040T
0.0020T
+0.038
+0.025
+0.0015
+0.0010
0.038T
0.012T
0.0015T
0.0005T
+0.038
+0.013
+0.0015
+0.0005
0.038T
0.012T
0.0015T
0.0005T
+0.076
+0.051
+0.0030
+0.0020
0.076T
0.026T
0.0030T
0.0010T
+0.102
+0.076
+0.0040
+0.0025
0.102T
0.051T
0.0040T
0.0020T
+0.064
+0.038
+0.0025
+0.0015
0.064T
0.013T
0.0025T
0.0005T
Housing Bore
Stationary Outer Ring
Rear
Wheels
(Semi-Floating
Axles)
Differential
Adjustable (TS)
Clamped (TSU)
(Split Seat)
Transmissions
Adjustable
Transfer Cases
Cross Shafts
Pinion
(Solid Seat)
Transmission
Adjustable
Differential
Transaxles
Transfer Cases
Non-adjustable
Housing Bore
Deviation
Resultant
Fit
Housing Bore
Deviation
Resultant
Fit
Housing Bore
Deviation
Resultant
Fit
Housing Bore
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
+0.038
+0.076
+0.0015
+0.0030
0.013L
0.076L
0.0005L
0.0030L
+0.025
+0.051
+0.0010
+0.0020
0.000
0.051L
0.0000
0.0020L
0.000
+0.025
0.000
+0.0010
0.025T
0.025L
0.0010T
0.0010L
-0.038
-0.013
-0.0015
-0.0005
0.063T
0.013T
0.0025T
0.0005T
+0.038
+0.076
+0.0015
+0.0030
0.013L
0.076L
0.0005L
0.0030L
+0.025
+0.051
+0.0010
+0.0020
0.000
0.051L
0.0000
0.0020L
0.000
+0.025
0.0000
+0.0010
0.025T
0.025L
0.0010T
0.0010L
-0.051
-0.025
-0.0020
-0.0010
0.076T
0.025T
0.0030T
0.0010T
0.000
+0.051
0.0000
+0.0020
0.025T
0.051L
0.0010T
0.0020L
0.000
+0.051
0.0000
+0.0020
0.025T
0.051L
0.0010T
0.0020L
-0.077
-0.025
-0.0030
-0.0010
0.102T
0.025T
0.0040T
0.0010T
155
Front Wheels
Rear Wheel
(Full-Floating Axles)
Trailer Wheels
Non-adjustable
156
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
18.000
0.7087
30.000
1.1811
-0.012
0.000
-0.0005
0.0000
-0.020
-0.033
-0.0008
-0.0013
0.008L
0.033L
0.0003L
0.0013L
30.000
1.1811
50.000
1.9685
-0.012
0.000
-0.0005
0.0000
-0.025
-0.041
-0.0010
-0.0016
50.000
1.9685
80.000
3.1496
-0.015
0.000
-0.0006
0.0000
80.000
3.1496
120.000
4.7244
120.000
4.7244
180.000
7.0866
Rear Wheels
(Unit-Bearing)
(Semi-Floating Axles)
Rear Wheels
(Semi-Floating Axles)
Non-adjustable
Symbol
mm
in.
f6
+0.035
+0.022
+0.0013
+0.0008
0.047T
0.022T
0.0018T
0.0008T
0.013L
0.041L
0.0005L
0.0016L
f6
+0.042
+0.026
+0.0016
+0.0010
-0.030
-0.049
-0.0012
-0.0019
0.015L
0.049L
0.0006L
0.0019L
f6
-0.020
0.000
-0.0008
0.0000
-0.035
-0.058
-0.0014
-0.0023
0.016L
0.058L
0.0006L
0.0023L
-0.025
0.000
-0.0010
0.0000
-0.043
-0.068
-0.0016
-0.0026
0.018L
0.068L
0.0006L
0.0026L
Non-adjustable
Symbol
Symbol
mm
in.
mm
in.
p6
+0.035
+0.022
+0.0013
+0.0008
0.047T
0.022T
0.0018T
0.0008T
p6
0.054T
0.026T
0.0021T
0.0010T
p6
+0.042
+0.026
+0.0016
+0.0010
0.054T
0.026T
0.0021T
0.0010T
p6
+0.051
+0.032
+0.0021
+0.0014
0.066T
0.032T
0.0027T
0.0014T
p6
f6
+0.045
+0.023
+0.0019
+0.0010
0.065T
0.023T
0.0027T
0.0010T
n6
f6
+0.052
+0.027
+0.0022
+0.0012
0.077T
0.029T
0.0032T
0.0012T
n6
Shaft O.D.
Rotating Inner Ring
Pinion
Clamped
Shaft O.D. Resultant
Deviation
Fit
mm
in.
mm
in.
+0.015
+0.002
+0.0006
+0.0001
0.027T
0.002T
0.0011T
0.0001T
+0.018
+0.002
+0.0007
+0.0001
Collapsible Spacer
Symbol
mm
in.
k6
+0.015
+0.002
+0.0006
+0.0001
0.027T
0.002T
0.0011T
0.0001T
0.030T
0.002T
0.0012T
0.0001T
k6
+0.018
+0.002
+0.0007
+0.0001
+0.021
+0.002
+0.0008
-0.0001
0.036T
0.002T
0.0014T
0.0001L
k6
+0.013
-0.009
+0.0005
-0.0004
0.033T
0.009L
0.0013T
0.0004L
j6
+0.014
-0.011
+0.0006
-0.0004
0.039T
0.011L
0.0016T
0.0004L
j6
Non-adjustable
Symbol
mm
in.
k6
+0.035
+0.022
+0.0013
+0.0009
0.047T
0.022T
0.0018T
0.0009T
0.030T
0.002T
0.0012T
0.0001T
k6
+0.042
+0.026
+0.0016
+0.0010
+0.021
+0.002
+0.0008
+0.0001
0.036T
0.002T
0.0014T
0.0001L
k6
Symbol
Differential
Transaxles, Transmissions
Transfer Cases, Cross Shafts
Non-adjustable
Non-adjustable
Symbol
mm
in.
mm
in.
mm
in.
mm
in.
p6
+0.056
+0.035
+0.0022
+0.0014
0.068T
0.035T
0.0027T
0.0014T
+0.021
+0.008
+0.0008
+0.0003
0.033T
0.008T
0.0013T
0.0003T
m6
0.054T
0.026T
0.0021T
0.0010T
p6
+0.068
+0.043
+0.0028
+0.0018
0.080T
0.043T
0.0033T
0.0018T
+0.025
+0.009
+0.0010
+0.0004
0.037T
0.009T
0.0015T
0.0004T
m6
+0.051
+0.032
+0.021
+0.014
0.066T
0.032T
0.0027T
0.0014T
p6
+0.0089
+0.059
+0.0034
+0.0022
0.104T
0.059T
0.0040T
0.0022T
+0.030
+0.011
+0.0012
+0.0004
0.045T
0.011T
0.0018T
0.0004T
m6
+0.045
+0.023
+0.0019
+0.0010
0.065T
0.023T
0.0027T
0.0010T
n6
+0.114
+0.079
+0.0044
+0.0030
0.134T
0.079T
0.0052T
0.0030T
+0.035
+0.013
+0.0014
+0.0005
0.055T
0.013T
0.0022T
0.0005T
m6
+0.052
+0.028
+0.0022
+0.0012
0.077T
0.029T
0.0032T
0.0012T
n6
+0.140
+0.100
+0.0056
+0.0040
0.165T
0.100T
0.0066T
0.0040T
+0.040
+0.015
+0.0016
+0.0006
0.066T
0.015T
0.0026T
0.0006T
157
T= Tight
L = Loose
TABLE 81. Tapered roller bearingS Outer Ring Automotive Equipment Classes K and N (Metric)
Housing Bore
Rotating Outer Ring
Outer Ring
O.D.
Tolerance
Over
Incl.
mm
in.
mm
in.
Rear Wheels
(Semi-Floating Axles)
Differential
(Split Seat)
Transmissions
Transfer Cases
Cross Shafts
Pinion Differential
(Solid Seat) Transaxles
Transmission(1)
Transfer Cases
Non-adjustable
Adjustable (TS)
Clamped (TSU)
Adjustable
Adjustable
Non-adjustable
Housing
Housing
Housing
Housing
Housing
Resultant
Resultant
Resultant
Resultant
Resultant
Bore
Symbol Bore
Symbol Bore
Symbol Bore
Symbol Bore
Symbol
Fit
Fit
Fit
Fit
Fit
Deviation
Deviation
Deviation
Deviation
Deviation
mm
in.
mm
in.
mm
in.
30.000 50.000
1.1811 1.9685
0.000
-0.014
0.0000
-0.0006
-0.050
-0.025
-0.0020
-0.0010
0.050T
0.011T
0.0020T
0.0004T
50.000 65.000
1.9685 2.5591
0.000
-0.016
0.0000
-0.0006
-0.060
-0.030
-0.0023
-0.0011
0.060T
0.014T
0.0023T
0.0005T
65.000 80.000
2.5591 3.1496
0.000
-0.016
0.0000
-0.0006
-0.062
-0.032
-0.0023
-0.0011
0.062T
0.016T
0.0023T
0.0005T
80.000 100.000
3.1496 3.9370
0.000
-0.018
0.0000
-0.0007
-0.073
-0.038
-0.0029
-0.0015
0.073T
0.020T
0.0029T
0.0008T
100.000 120.000
3.9370 4.7244
0.000
-0.018
0.0000
-0.0007
-0.076
-0.041
-0.0029
-0.0015
0.076T
0.023T
0.0029T
0.0008T
120.000 140.000
4.7244 5.5118
0.000
-0.020
0.0000
-0.0008
-0.088
-0.048
-0.0035
-0.0019
0.088T
0.028T
0.0035T
0.0011T
140.000 150.000
5.5118 5.9055
0.000
-0.020
0.0000
-0.0008
-0.090
-0.050
-0.0035
-0.0019
0.090T
0.030T
0.0035T
0.0011T
150.000 160.000
5.9055 6.2992
0.000
-0.025
0.0000
-0.0010
-0.090
-0.050
-0.0035
-0.0019
0.090T
0.025T
0.0035T
0.0009T
0.000
-0.025
0.0000
-0.0010
-0.093
-0.053
-0.0035
-0.0019
0.093T
0.028T
0.0035T
0.0009T
160.000 180.000
6.2992 7.0866
Front Wheels
Rear Wheels
(Full-Floating
Trailer Wheels)
mm
in.
R7
R7
R7
R7
R7
mm
in.
+0.009 0.009L
+0.034 0.048L
+0.0004 0.0004L
+0.0014 0.0020L
+0.010 0.010L
+0.040 0.056L
+0.0004 0.0004L
+0.0016 0.0022L
+0.012 0.012L
+0.047 0.065L
+0.0005 0.0005L
+0.0029 0.0026L
+0.014 0.014L
+0.054 0.074L
+0.0006 0.0006L
+0.0022 0.0030L
+0.014 0.014L
+0.054 0.079L
+0.0006 0.0006L
+0.0022 0.0032L
mm
in.
G7
G7
G7
G7
G7
mm
in.
0.000
0.000
+0.025 0.039L
0.0000 0.0000
+0.0010 0.0016L
0.000
0.000
+0.030 0.046L
0.0000 0.0000
+0.0012 0.0018L
0.000
0.000
+0.035 0.053L
0.0000 0.0000
+0.0014 0.0021L
-0.014 0.014T
+0.026 0.046L
-0.0006 0.0006L
+0.0010 0.0018L
-0.014 0.014T
+0.026 0.051L
-0.0006 0.0006T
+0.0010 0.0020L
mm
in.
H7
H7
H7
J7
J7
-0.013 0.013T
+0.003 0.017L
-0.0005 0.0005T
+0.0001 0.0007L
-0.015 0.015T
+0.004 0.020L
-0.0006 0.0006T
+0.0001 0.0007L
-0.018 0.018T
+0.004 0.022L
-0.0007 0.0007T
+0.0002 0.0009L
-0.021 0.021T
+0.004 0.024L
-0.0008 0.0008T
+0.0002 0.0010L
-0.021 0.021T
+0.004 0.029L
-0.0008 0.0008T
+0.0002 0.0012L
(1)Aluminum housings min. fit of 0.025 mm (0.001 in.) per inch of outer ring O.D. Magnesium housing min. fit of 0.038 mm (0.0015 in.)
158
mm
in.
mm
in.
K6
K6
K6
K6
K6
mm
in.
-0.050 0.050T
-0.025 0.011T
-0.0020 0.0020T
-0.0010 0.0004T
-0.060
0.060
-0.030 0.014T
-0.0023 0.0023T
-0.0011 0.0005T
-0.062 0.062T
-0.032 0.016T
-0.0023 0.0023T
-0.0011 0.0005T
-0.073 0.073T
-0.038 0.020T
-0.0029 0.0029T
-0.0015 0.0008T
-0.076 0.076T
-0.041 0.023T
-0.0029 0.0029T
-0.0015 0.0008T
-0.088 0.088T
-0.048 0.028T
-0.0035 0.0035T
-0.0019 0.0011T
-0.090 0.090T
-0.050 0.030T
-0.0035 0.0035T
-0.0019 0.0011T
-0.090 0.090T
-0.050 0.025T
-0.0035 0.0035T
-0.0019 0.0009T
-0.093 0.093T
-0.053 0.028T
-0.0035 0.0035T
-0.0019 0.0009T
R7
R7
R7
R7
R7
Table 81 continued.
TABLE
81. Tapered roller bearingS Outer Ring Automotive Equipment Classes K and N (Metric)
Housing Bore
Rotating Outer Ring
Outer Ring
O.D.
Tolerance
Over
Incl.
mm
in.
mm
in.
Front Wheels
Rear Wheels
(Full-Floating
Trailer Wheels)
Rear Wheels
(Semi-Floating Axles)
Differential
(Split Seat)
Transmissions
Transfer Cases
Cross Shafts
Pinion Differential
(Solid Seat) Transaxles
Transmission(1)
Transfer Cases
Non-adjustable
Adjustable (TS)
Clamped (TSU)
Adjustable
Adjustable
Non-adjustable
Housing
Housing
Housing
Housing
Housing
Resultant
Resultant
Resultant
Resultant
Resultant
Bore
Symbol Bore
Symbol Bore
Symbol Bore
Symbol Bore
Symbol
Fit
Fit
Fit
Fit
Fit
Deviation
Deviation
Deviation
Deviation
Deviation
mm
in.
mm
in.
mm
in.
180.000 200.000
7.0866 7.8740
0.000
-0.030
0.0000
-0.0012
-0.106
-0.060
-0.0042
-0.0024
0.106T
0.030T
0.0042T
0.0012T
200.000 225.000
7.8740 8.8583
0.000
-0.030
0.0000
-0.0012
-0.109
-0.063
-0.0042
-0.0024
0.109T
0.033T
0.0042T
0.0012T
225.000 250.000
8.8583 9.8425
0.000
-0.030
0.0000
-0.0012
-0.113
-0.067
-0.0042
-0.0024
0.113T
0.037T
0.0042T
0.0012T
-0.113 0.113T
-0.067 0.037T
-0.0042 0.0042T
-0.0024 0.0012T
250.000 280.000
9.8425 11.0236
0.000
-0.035
0.0000
-0.0014
-0.126
-0.074
-0.0047
-0.0027
0.126T
0.039T
0.0047T
0.0013T
-0.126 0.126T
-0.074 0.039T
-0.0047 0.0047T
-0.0027 0.0013T
280.000 315.000
11.0236 12.4016
0.000
-0.035
0.0000
-0.0014
-0.130
-0.078
-0.0047
-0.0027
0.130T
0.043T
0.0047T
0.0013T
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
-0.106 0.106T
-0.060 0.030T
-0.0042 0.0042T
-0.0024 0.0012T
R7
R7
-0.016 0.016T
+0.030 0.060L
-0.0007 0.0007T
+0.0011 0.0023L
-0.016 0.016T
+0.036 0.071L
-0.0007 0.0007T
+0.0013 0.0027L
J7
J7
-0.016 0.016T
+0.030 0.060L
-0.0007 0.0007T
+0.0011 0.0023L
-0.016 0.016T
+0.036 0.071L
-0.0007 0.0007T
+0.0014 0.0027L
J7
J7
-0.109 0.109T
-0.063 0.033T
-0.0042 0.0042T
-0.0024 0.0012T
-0.130 0.130T
-0.078 0.043T
-0.0047 0.0047T
-0.0027 0.0013T
R7
R7
(1)Aluminum housings min. fit of 0.025 mm (0.001 in.) per inch of outer ring O.D. Magnesium housing min. fit of 0.038 mm (0.0015 in.) per inch of outer ring O.D.
159
hydra-rib
Classes C and B (Metric)
Deviation from nominal
(maximum) bearing bore and
resultant fit.
T= Tight
L = Loose
160
For heavy loads, high speed or shock, contact your Timken engineer for further information.
Class C
Class B
Over
Incl.
Bearing
Bore
Tolerance
Shaft
Resultant
O.D.
Fit
Deviation
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
30.000
1.1811
50.000
1.9685
-0.010
0.000
-0.0004
0.0000
+0.013
+0.002
+0.0005
+0.0001
0.023T
0.002T
0.0009T
0.0001T
50.000
1.9685
80.000
3.1496
-0.013
0.000
-0.0005
0.0000
+0.015
+0.002
+0.0006
+0.0001
0.028T
0.002T
0.0011T
0.0001T
80.000
3.1496
120.000
4.7244
-0.013
0.000
-0.0005
0.0000
+0.018
+0.003
+0.0007
+0.0001
120.000
4.7244
180.000
7.0866
-0.013
0.000
-0.0005
0.0000
180.000
7.0866
250.000
9.8425
-0.015
0.000
-0.0006
0.0000
Symbol
Bearing
Bore
Tolerance
Shaft
Resultant
O.D.
Fit
Deviation
Symbol
mm
in.
mm
in.
mm
in.
k5
-0.010
0.000
-0.0004
0.0000
+0.013
+0.002
+0.0005
+0.0001
0.023T
0.002T
0.0009T
0.0001T
k5
k5
-0.010
0.000
-0.0004
0.0000
+0.015
+0.002
+0.0006
+0.0001
0.025T
0.002T
0.0010T
0.0001T
k5
0.031T
0.003T
0.0012T
0.0001T
k5
-0.010
0.000
-0.0004
0.0000
+0.018
+0.003
+0.0007
+0.0001
0.028T
0.003T
0.0011T
0.0001T
k5
+0.021
+0.003
+0.0008
+0.0001
0.034T
0.003T
0.0013T
0.0001T
k5
-0.010
0.000
-0.0004
0.0000
+0.021
+0.003
+0.0008
+0.0001
0.031T
0.003T
0.0012T
0.0001T
k5
+0.024
+0.004
+0.0010
+0.0002
0.039T
0.004T
0.0016T
0.0002T
-0.013
0.000
-0.0005
0.0000
+0.024
+0.004
+0.0010
+0.0002
0.037T
0.004T
0.0015T
0.0002T
k5
Class C
Class B
Over
Incl.
Bearing
Bore
Tolerance
Shaft
Resultant
O.D.
Fit
Deviation
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
80.000
3.1496
120.000
4.7244
0.000
-0.013
0.0000
-0.0005
-0.023
-0.008
-0.0009
-0.0003
0.023T
0.005L
0.0009T
0.0002L
120.000
4.7244
180.000
7.0866
0.000
-0.013
0.0000
-0.0005
-0.027
-0.009
-0.0011
-0.0004
0.027T
0.004L
0.0011T
0.0001L
180.000
7.0866
250.000
9.8425
0.000
-0.015
0.0000
-0.0006
-0.031
-0.011
-0.0012
-0.0004
250.000
9.8425
315.000
12.4016
0.000
-0.020
0.0000
-0.0008
315.000
12.4016
400.000
15.7480
0.000
-0.020
0.0000
-0.0008
Symbol
Bearing
Bore
Tolerance
Shaft
Resultant
O.D.
Fit
Deviation
Symbol
mm
in.
mm
in.
mm
in.
M5
0.000
-0.010
0.0000
-0.0004
-0.023
-0.008
-0.0009
-0.0003
0.023T
0.002L
0.0009T
0.0001L
M5
M5
0.000
-0.010
0.0000
-0.0004
-0.027
-0.009
-0.0011
-0.0004
0.027T
0.001L
0.0011T
0.0000
M5
0.031T
0.004L
0.0012T
0.0002L
M5
0.000
-0.013
0.0000
-0.0005
-0.031
-0.011
-0.0012
-0.0004
0.031T
0.002L
0.0012T
0.0001L
M5
-0.036
-0.013
-0.0014
-0.0005
0.036T
0.007L
0.0014T
0.0003L
M5
0.000
-0.015
0.0000
-0.0006
-0.036
-0.013
-0.0014
-0.0005
0.036T
0.002L
0.0014T
0.0001L
M5
-0.039
-0.014
-0.0015
-0.0006
0.039T
0.006L
0.0015T
0.0002L
M5
161
ISO + J Prefix
Class B (metric)
Incl.
mm
in.
mm
in.
mm
in.
Floating
Clamped
Adjustable
Non-adjustable or
In Carriers
Outer Ring
Outer Ring
Outer Ring
Outer Ring
Outer Ring
Resultant
Resultant
Resultant
Resultant
Resultant
Seat
Symbol Seat
Symbol Seat
Symbol Seat
Symbol Seat
Symbol
Fit
Fit
Fit
Fit
Fit
Deviation
Deviation
Deviation
Deviation
Deviation
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
18.000 30.000
0.7087 1.1811
0.000
-0.006
0.0000
-0.0002
+0.007 0.007L
+0.016 0.022L
+0.0003 0.0003L
+0.0007 0.0009L
G5
0.000
0.000
+0.006 0.012L
0.0000 0.0000
+0.0002 0.0005L
H4
-0.008 0.008T
0.001
0.007L
-0.0004 0.0004T
0.0000 0.0002L
K5
-0.0140
-0.0050
-0.0006
-0.0002
0.0140T
0.0010L
0.0006T
0.00001L
M5
-0.021 0.021T
-0.012 0.006T
-0.0008 0.0008T
-0.0005 0.0002T
N5
30.000 50.000
1.1811 1.9685
0.000
-0.007
0.0000
-0.0003
+0.009 0.009L
+0.020 0.027L
+0.0004 0.0004L
+0.0008 0.0011L
G5
0.000
0.000
+0.007 0.014L
0.0000 0.0000
+0.0003 0.0006L
H4
-0.009 0.009T
0.002
0.009L
-0.0004 0.0004T
0.0000 0.0004L
K5
-0.016 0.016T
-0.005 0.002L
-0.0007 0.0007T
-0.0003 0.0000
M5
-0.024 0.024T
-0.013 0.006T
-0.0010 0.0010T
-0.0006 0.003T
N5
50.000 80.000
1.9685 3.1496
0.000
-0.009
0.0000
-0.0004
+0.010 0.010L
+0.023 0.032L
+0.0004 0.0004L
+0.0009 0.0013L
G5
0.000
0.000
+0.008 0.017L
0.0000 0.0000
+0.0003 0.0007L
H4
-0.010 0.010T
+0.003 0.012L
-0.0004 0.0004T
+0.0001 0.0005L
K5
-0.019
-0.006
-0.0008
-0.0003
M5
-0.028 0.028T
-0.015 0.006T
-0.0011 0.0011T
-0.0006 0.0002T
N5
80.000 120.000
3.1496 4.7244
0.000
-0.010
0.0000
-0.0004
+0.012 0.012L
+0.027 0.037L
+0.0005 0.0005L
+0.0011 0.0015L
G5
0.000
0.000
+0.010 0.020L
0.0000 0.0000
+0.0004 0.0008L
H4
-0.013 0.013T
+0.002 0.012L
-0.0005 0.0005T
+0.0001 0.0005L
K5
-0.023 0.023T
-0.008 0.002L
-0.0009 0.0009T
-0.0003 0.0001L
M5
-0.033 0.033T
-0.018 0.008T
-0.0014 0.0014T
-0.0008 0.0004T
N5
120.000 150.000
4.7244 5.9055
0.000
-0.011
0.0000
-0.0004
+0.014 0.014L
+0.032 0.043L
+0.0006 0.0006L
+0.0013 0.0017L
G5
0.000
0.000
+0.012 0.023L
0.0000 0.0000
+0.0005 0.0009L
H4
-0.0125
+0.0125
-0.0005
+0.0005
0.0125T
0.0235L
0.0005T
0.0009L
Js6
-0.027 0.027T
-0.009 0.002L
-0.0011 0.0011T
-0.0004 0.0000
M5
-0.039 0.039T
-0.021 0.010T
-0.0017 0.0017T
-0.0010 0.0006T
N5
150.000 180.000
5.9055 7.0866
0.000
-0.013
0.0000
-0.0005
+0.014 0.014L
+0.032 0.045L
+0.0006 0.0006L
+0.0013 0.0018L
G5
0.000
0.000
+0.012 0.025L
0.0000 0.0000
+0.0005 0.0010L
H4
-0.0125
+0.0125
-0.0005
+0.0005
0.0125T
0.0255L
0.0005T
0.0010L
Js6
-0.027 0.027T
-0.009 0.004L
-0.0011 0.0011T
-0.0004 0.0002L
M5
-0.039 0.039T
-0.021 0.008T
-0.0017 0.0017T
-0.0010 0.0005T
N5
180.000 250.000
7.0866 9.8425
0.000
-0.015
0.0000
-0.0006
+0.015 0.015L
+0.035 0.050L
+0.0006 0.0006L
+0.0014 0.0020L
G5
0.000
0.000
+0.014 0.029L
0.0000 0.0000
+0.0006 0.0012L
H4
-0.010 0.010T
+0.010 0.025L
-0.0004 0.0004T
+0.0004 0.0010L
Js5
-0.031 0.031T
-0.011 0.004L
-0.0012 0.0012T
-0.0004 0.0002L
M5
-0.045 0.045T
-0.025 0.010T
-0.0020 0.00250T
-0.0012 0.0006T
N5
250.000 315.000
9.8425 12.4016
0.000
-0.018
0.0000
-0.0007
+0.017 0.017L
+0.040 0.058L
+0.0007 0.0007L
+0.0016 0.0023L
G5
0.000
0.000
+0.016 0.034L
0.0000 0.0000
+0.0006 0.0013L
H4
-0.0115
+0.0115
-0.0005
+0.0005
Js5
-0.036 0.036L
-0.013 0.005L
-0.0014 0.0014T
-0.0005 0.0002L
M5
-0.050 0.050T
-0.027 0.009T
-0.0020 0.0020T
-0.0011 0.0004T
N5
162
0.0115T
0.0295L
0.0005T
0.0010L
0.0019T
0.0003L
0.0008T
0.0001L
Floating
Clamped
Adjustable
Non-adjustable or
In Carriers
Outer Ring
Outer Ring
Outer Ring
Outer Ring
Outer Ring
Resultant
Resultant
Resultant
Resultant
Resultant
Seat
Symbol Seat
Symbol Seat
Symbol Seat
Symbol Seat
Symbol
Fit
Fit
Fit
Fit
Fit
Deviation
Deviation
Deviation
Deviation
Deviation
Over
Incl.
mm
in.
mm
in.
mm
in.
18.000
0.7087
30.000
1.1811
0.000
-0.008
0.0000
-0.0003
+0.007 0.007L
+0.016 0.024L
+0.0003 0.0003L
+0.0007 0.0010L
G5
0.000
0.000
+0.009 0.017L
0.0000 0.0000
+0.0004 0.0007L
H5
-0.008 0.008T
+0.001 0.009L
-0.0004 0.0004T
0.0000 0.0003L
K5
-0.021 0.021T
-0.012 0.004T
-0.0010 0.0010T
-0.0005 0.0002T
N5
-0.024 0.024T
-0.011 0.003T
-0.0010 0.0010T
-0.0005 0.0002T
N6
30.000
1.1811
50.000
1.9685
0.000
-0.009
0.0000
-0.0004
+0.009 0.009L
+0.020 0.029L
+0.0004 0.0004L
+0.0008 0.0012L
G5
0.000
0.000
+0.011 0.020L
0.0000 0.0000
+0.0004 0.0008L
H5
-0.009 0.009T
+0.002 0.011L
-0.0004 0.0004T
0.0000 0.0004L
K5
-0.024 0.024T
-0.013 0.004T
-0.0010 0.0010T
-0.0006 0.0002T
N5
-0.028 0.028T
-0.012 0.003T
-0.0010 0.0011T
-0.0005 0.0001T
N6
50.000
1.9685
80.000
3.1496
0.000
-0.011
0.0000
-0.0004
+0.010 0.010L
+0.023 0.034L
+0.0004 0.0004L
+0.0009 0.0013L
G5
0.000
0.000
+0.013 0.024L
0.0000 0.0000
+0.0005 0.0009L
H5
-0.010 0.010T
+0.003 0.014L
-0.0004 0.0004T
+0.0001 0.0005L
K5
-0.028 0.028T
-0.015 0.004T
-0.0011 0.0011T
-0.0006 0.0002T
N5
-0.033 0.033T
-0.014 0.003T
-0.0013 0.0013T
-0.0006 0.0002T
N6
80.000
3.1496
120.000
4.7244
0.000
-0.013
0.0000
-0.0005
+0.012 0.012L
+0.027 0.040L
+0.0005 0.0005L
+0.0011 0.0016L
G5
0.000
0.000
+0.015 0.028L
0.0000 0.0000
+0.0006 0.0011L
H5
-0.013 0.013T
+0.002 0.015L
-0.0005 0.0005T
+0.0001 0.0006L
K5
-0.033 0.033T
-0.018 0.005T
-0.0014 0.0014T
-0.0008 0.0003T
N5
-0.038 0.038T
-0.016 0.003T
-0.0016 0.0016T
-0.0007 0.0002T
N6
120.000 150.000
4.7244 5.9055
0.000
-0.015
0.0000
-0.0006
+0.014 0.014L
+0.032 0.047L
+0.0006 0.0006L
+0.0013 0.0019L
G5
0.000
0.000
+0.018 0.033L
0.0000 0.0000
+0.0007 0.0013L
H5
-0.0125
+0.0125
-0.0005
+0.0005
0.0125T
0.0275L
0.0005T
0.0011L
Js6
-0.039 0.039T
-0.021 0.006T
-0.0017 0.0017T
-0.0010 0.0004T
N5
-0.045 0.0045T
-0.020 0.005T
-0.0019 0.0019T
-0.0009 0.0003T
N6
150.000 180.000
5.9055 7.0866
0.000
-0.018
0.0000
-0.0007
+0.014 0.014L
+0.032 0.050L
+0.0006 0.0006L
+0.0013 0.0020L
G5
0.000
0.000
+0.018 0.036L
0.0000 0.0000
+0.0007 0.0014L
H5
-0.0125
+0.0125
-0.0005
+0.0005
0.0125T
0.0305L
0.0005T
0.0012L
Js6
-0.039 0.039T
-0.021 0.003T
-0.0017 0.0017T
-0.0010 0.0003T
N5
-0.045 0.045T
-0.020 0.002T
-0.0019 0.0019T
-0.0009 0.0002T
N6
180.000 250.000
7.0866 9.8425
0.000
-0.020
0.0000
-0.0008
+0.015 0.015L
+0.035 0.055L
+0.0006 0.0006L
+0.0014 0.0022L
G5
0.000
0.000
+0.020 0.040L
0.0000 0.0000
+0.0008 0.0016L
H5
-0.0145
+0.0145
-0.0006
+0.0006
0.0145T
0.0345L
0.0006T
0.0014L
Js6
-0.045 0.045T
-0.025 0.005T
-0.0020 0.0020T
-0.0012 0.0004T
N5
-0.051 0.051T
-0.022 0.002T
-0.0022 0.0022T
-0.0010 0.0002T
N6
250.000 315.000
9.8425 12.4016
0.000
-0.025
0.0000
-0.0010
+0.017 0.017L
+0.040 0.065L
+0.0007 0.0007L
+0.0016 0.0026L
G5
0.000
0.000
+0.023 0.048L
0.0000 0.0000
+0.0009 0.0019L
H5
-0.020 0.020T
+0.003 0.028L
-0.0008 0.0008T
+0.0001 0.0011L
K5
-0.050 0.050T
-0.027 0.002T
-0.0020 0.0020T
-0.0011 0.0001T
N5
-0.050 0.050T
-0.027 0.002T
-0.0020 0.0020T
-0.0011 0.0001T
N5
315.000 400.000
12.4016 15.7480
0.000
-0.028
0.0000
-0.0011
+0.018 0.018L
+0.043 0.071L
+0.0007 0.0007L
+0.0017 0.0028L
G5
0.000
0.000
+0.025 0.053L
0.0000 0.0000
+0.0010 0.0021L
H5
-0.022 0.022T
+0.003 0.031L
-0.0009 0.0009T
+0.0001 0.0012L
K5
-0.055 0.055T
-0.030 0.002T
-0.0023 0.0023T
-0.0013 0.0002T
N5
-0.055 0.055T
-0.030 0.002T
-0.0023 0.0023T
-0.0013 0.0002T
N5
400.000 500.000
15.7480 19.6850
0.000
-0.030
0.0000
-0.0012
+0.020 0.020L
+0.047 0.077L
+0.0008 0.0008L
+0.0018 0.0030L
G5
0.000
0.000
+0.027 0.057L
0.0000 0.0000
+0.0011 0.0022L
H5
-0.025 0.025T
+0.002 0.032L
-0.0010 0.0010T
0.0000 0.0012L
K5
-0.060 0.060T
-0.033 0.003T
-0.0026 0.0026T
-0.0016 0.0004T
N5
-0.060 0.060T
-0.033 0.003T
-0.0026 0.0026T
-0.0016 0.0004T
N5
500.000 630.000
19.6850 24.8032
0.000
-0.035
0.0000
-0.0014
+0.025 0.025L
+0.050 0.085L
+0.0010 0.0010L
+0.0020 0.0034L
0.000
0.000
+0.025 0.060L
0.0000 0.0000
+0.0010 0.0024L
-0.025 0.025T
+0.000 0.035L
-0.0010 0.0010T
0.0000 0.0014L
-0.065 0.065T
-0.040 0.005T
-0.0026 0.0026T
-0.0016 0.0002T
-0.075 0.075T
-0.038 0.003T
-0.0030 0.0030T
-0.0015 0.0001T
630.000 800.000
24.8032 31.4961
0.000
-0.040
0.0000
-0.0016
+0.025 0.025L
+0.065 0.105L
+0.0010 0.0010L
+0.0026 0.0042L
0.000
0.000
+0.040 0.080L
0.0000 0.0000
+0.0016 0.0032L
-0.040 0.040T
0.000
0.040L
-0.0016 0.0016T
0.0000 0.0016L
-0.090 0.090T
-0.050 0.010T
-0.0035 0.0035T
-0.0020 0.0004T
-0.095 0.095T
-0.050 0.010T
-0.0037 0.0037T
-0.0020 0.0006t
800.000 1000.000
31.4961 39.3701
0.000
-0.050
0.0000
-0.020
+0.025 0.025L
+0.075 0.125L
+0.0010 0.0010L
+0.0030 0.0050L
0.000
0.000
+0.050 0.100L
0.0000 0.0000
+0.0020 0.0040L
-0.050 0.050T
0.000
0.050L
-0.0020 0.0020T
0.0000 0.0020L
-0.100 0.100T
-0.050
0.000
-0.0039 0.0039T
-0.0020 0.0000
-0.115 0.115T
-0.065 0.015T
-0.0045 0.0045T
-0.0026 0.0006T
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
163
ISO + J PREFIX
Classes 3 and 0 (Inch)
T= Tight
L = Loose
TABLE 86. Precision Class Tapered Roller Bearings Outer Ring
ISO + J Prefix, Classes 3 and 0 (Inch)
Floating
Clamped
Adjustable
Non-adjustable or
In Carriers
Non-adjustable or
In Carriers
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
152.400
6.0000
+0.013
0.000
+0.0005
0.0000
+0.026
+0.038
+0.0010
+0.0015
0.013L
0.038L
0.0005L
0.0015L
+0.013
+0.025
+0.0005
+0.0010
0.000
0.025L
0.0000
0.0010L
0.000
+0.013
0.0000
+0.0005
0.013T
0.013L
0.0005T
0.0005L
-0.012
0.000
-0.0005
0.0000
0.025T
0.000
0.0015T
0.0000
-0.025
-0.013
-0.0010
-0.0005
0.038T
0.013T
0.0015T
0.0005T
152.400
6.0000
304.800
12.0000
+0.013
0.000
+0.0005
0.0000
+0.026
+0.038
+0.0010
+0.0015
0.013L
0.038L
0.0005L
0.0015L
+0.013
+0.025
+0.0005
+0.0010
0.000
0.025L
0.0000
0.0010L
0.000
+0.025
0.0000
+0.0010
0.013T
0.025L
0.0005T
0.0010L
-0.025
0.000
-0.0010
0.0000
0.038T
0.000
0.0015T
0.0000
-0.038
-0.013
-0.0015
-0.0005
0.051T
0.013T
0.0020T
0.0005T
304.800
12.0000
609.600
24.0000
+0.025
0.000
+0.0010
0.0000
+0.038
+0.064
+0.0015
+0.0025
0.013L
0.064L
0.0005L
0.0025L
+0.025
+0.051
+0.0010
+0.0020
0.000
0.051L
0.0000
0.0020L
0.000
+0.025
0.0000
+0.0010
0.025T
0.025L
0.0010T
0.0010L
-0.025
0.000
-0.0010
0.0000
0.051T
0.000
0.0020T
0.0000
-0.038
-0.013
-0.0015
-0.0005
0.064T
0.013T
0.0025T
0.0005T
609.600
24.0000
914.400
36.0000
+0.038
0.000
+0.0015
0.0000
+0.051
+0.089
+0.0020
+0.0035
0.013L
0.089L
0.0005L
0.0035L
+0.038
+0.076
+0.0015
+0.0030
0.000
0.076L
0.0000
0.0030L
0.000
+0.038
0.0000
+0.0015
0.038T
0.038L
0.0015T
0.0015L
-0.038
0.000
-0.0015
0.0000
0.076T
0.000
0.0030T
0.0000
-0.051
-0.013
-0.0020
-0.0005
0.089T
0.013T
0.0035T
0.0005T
Over
Incl.
mm
in.
mm
in.
0.000
0.0000
(1)Maximum outer ring O.D. for Class 0 product is 315.00 mm (12.406 in.).
164
ISO + J PREFIX
Classes A and AA (Metric)
T= Tight
L = Loose
Incl.
mm
in.
mm
in.
mm
in.
0.000 315.000
0.0000 12.4016
0.000
-0.008
0.0000
-0.0003
Floating
Clamped
Adjustable
Non-adjustable or
In Carriers
Outer Ring
Outer Ring
Outer Ring
Outer Ring
Outer Ring
Resultant
Resultant
Resultant
Resultant
Resultant
Seat
Symbol Seat
Symbol Seat
Symbol Seat
Symbol Seat
Symbol
Fit
Fit
Fit
Fit
Fit
Deviation
Deviation
Deviation
Deviation
Deviation
mm
in.
mm
in.
mm
in.
+0.008 0.008L
+0.016 0.024L
+0.0003 0.0003L
+0.0006 0.0009L
mm
in.
mm
in.
0.000
0.000
+0.008 0.016L
0.0000 0.0000
+0.0003 0.0006L
mm
in.
-0.008 0.008T
0.000
0.008L
-0.0003 0.0003T
0.0000 0.0003L
mm
in.
mm
in.
-0.016 0.016T
-0.008
0.000
-0.0006 0.0006T
-0.0003 0.0000
mm
in.
mm
in.
-0.024 0.024T
-0.016 0.008T
-0.0009 0.0009T
-0.0006 0.0003T
ISO + J PREFIX
Classes 00 and 000 (Inch)
T= Tight
L = Loose
Over
Incl.
mm
in.
mm
in.
0.000
0.0000
315.000
12.4016
Floating
Clamped
Adjustable
Non-adjustable or
In Carriers
Non-adjustable or
In Carriers
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
+0.008
0.000
+0.0003
0.0000
+0.016
+0.023
+0.0006
+0.0009
0.008L
0.023L
0.0003L
0.0009L
+0.008
+0.015
+0.0003
+0.0006
0.000
0.015L
0.0000
0.0006L
0.000
+0.008
0.0000
+0.0003
0.008T
0.008L
0.0003T
0.0003L
-0.007
0.000
-0.0003
0.0000
0.015T
0.000
0.0006T
0.0000
-0.015
-0.008
-0.0006
-0.0003
0.023T
0.008T
0.0009T
0.0003T
165
ISO + J Prefix
Class C (Metric)
T= Tight
L = Loose
Ground Seat
Rotating Inner Ring
Range
Tolerance
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
18.000
0.7087
-0.007
0.000
-0.0003
0.0000
18.000
0.7087
30.000
1.1811
30.000
1.1811
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
+0.009
+0.001
+0.0004
+0.0001
0.016T
0.001T
0.0006T
0.0001T
-0.008
0.000
-0.0003
0.0000
+0.011
+0.002
+0.0004
+0.0001
0.019T
0.002T
0.0007T
0.0001T
50.000
1.9685
-0.010
0.000
-0.0004
0.0000
+0.013
+0.002
+0.0005
+0.0001
50.000
1.9685
80.000
3.1496
-0.012
0.000
-0.0005
0.0000
80.000
3.1496
120.000
4.7244
120.000
4.7244
180.000
7.0866
180.000
7.0866
200.000
7.8740
200.000
7.8740
225.000
8.8583
225.000
8.8583
250.000
9.8425
Over
Incl.
mm
in.
mm
in.
10.000
0.3937
Resultant
Fit
mm
in.
mm
in.
mm
in.
k5
+0.018
+0.007
+0.0007
+0.0003
0.025T
0.007T
0.0010T
0.0003T
m6
+0.009
+0.001
+0.0004
+0.0001
0.016T
0.001T
0.0006T
0.0001T
k5
k5
+0.017
+0.008
+0.0007
+0.0003
0.025T
0.008T
0.0010T
0.0003T
m5
+0.011
+0.002
+0.0004
+0.0001
0.019T
0.002T
0.0007T
0.0001T
k5
0.023T
0.002T
0.0009T
0.0001T
k5
+0.020
+0.009
+0.0008
+0.0003
0.030T
0.009T
0.0012T
0.0003T
m5
+0.013
+0.002
+0.0005
+0.0001
0.023T
0.002T
0.0009T
0.0001T
k5
+0.015
+0.002
+0.0006
+0.0001
0.027T
0.002T
0.0011T
0.0001T
k5
+0.033
+0.020
+0.0013
+0.0008
0.045T
0.020T
0.0018T
0.0008T
n5
+0.015
+0.002
+0.0006
+0.0001
0.027T
0.002T
0.0011T
0.0001T
k5
-0.015
0.000
-0.0006
0.0000
+0.018
+0.003
+0.0007
+0.0001
0.033T
0.003T
0.0013T
0.0001T
k5
+0.038
+0.023
+0.0015
+0.0010
0.053T
0.023T
0.0021T
0.0010T
n5
+0.018
+0.003
+0.0007
+0.0001
0.033T
0.003T
0.0013T
0.0001T
k5
-0.018
0.000
-0.0007
0.0000
+0.021
+0.003
+0.0008
+0.0001
0.038T
0.003T
0.0015T
0.0001T
k5
+0.056
+0.043
+0.0022
+0.0017
0.073T
0.043T
0.0029T
0.0017T
p4
+0.021
+0.003
+0.0008
+0.0001
0.039T
0.003T
0.0015T
0.0001T
k5
+0.091
+0.077
+0.0036
+0.0030
0.113T
0.077T
0.0044T
0.0030T
+0.094
+0.080
+0.0037
+0.0031
0.116T
0.080T
0.0046T
0.0031T
r4
+0.024
+0.004
+0.0010
+0.0002
0.046T
0.004T
0.0018T
0.0002T
k5
+0.098
+0.084
+0.0039
+0.0033
0.120T
0.084T
0.0047T
0.0033T
-0.022
0.000
-0.0009
0.0000
+0.024
+0.004
+0.0010
+0.0002
0.046T
0.004T
0.0018T
0.0002T
Symbol
k5
Symbol
Symbol
166
Table 89 continued.
Ground Seat
Rotating Inner Ring
Range
Tolerance
Over
Incl.
mm
in.
mm
in.
250.000
9.8425
280.000
11.0236
280.000
11.0236
315.000
12.4016
315.000
12.4016
355.000
13.9764
355.000
13.9764
400.000
15.7480
400.000
15.7480
450.000
17.7165
mm
in.
-0.022
0.000
-0.0009
0.0000
-0.025
0.000
-0.0010
0.0000
Resultant
Fit
mm
in.
mm
in.
+0.027
+0.004
+0.0011
+0.0002
+0.029
+0.004
+0.0011
+0.0002
0.048T
0.004T
0.0019T
0.0002T
0.054T
0.004T
0.0019T
0.0002T
Symbol
k5
k5
-0.025
0.000
-0.0010
0.0000
+0.022
+0.005
+0.0009
+0.0002
0.057T
0.005T
0.0022T
0.0002T
k5
450.000
17.7165
500.000
19.6850
500.000
19.6850
630.000
24.8032
-0.030
0.000
-0.0012
0.0000
+0.040
+0.010
+0.0016
+0.0004
0.070T
0.010T
0.0028T
0.0004T
630.000
24.8032
800.000
31.4961
-0.040
0.000
-0.0016
0.0000
0.055
+0.015
+0.0022
+0.0006
0.095T
0.015T
0.0037T
0.0006T
800.000
31.4961
1000.000
39.3701
-0.050
0.000
-0.0020
0.0000
+0.065
+0.015
+0.0026
+0.0006
0.115T
0.015T
0.0045T
0.0006T
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
+0.117
+0.094
+0.0046
+0.0037
0.139T
0.094T
0.0055T
0.0037T
+0.121
+0.098
+0.0048
+0.0039
0.143T
0.098T
0.0056T
0.0039T
+0.133
+0.108
+0.0052
+0.0043
0.154T
0.108T
0.0061T
0.0043T
+0.139
+0.144
+0.0055
+0.0057
0.164T
0.114T
0.0065T
0.0045T
+0.153
+0.126
+0.0060
+0.0050
0.178T
0.126T
0.0070T
0.0050T
+0.159
+0.132
+0.0063
+0.0052
0.184T
0.132T
0.0072T
0.0052T
+0.185
+0.150
+0.0073
+0.0059
0.215T
0.150T
0.0085T
0.0059T
+0.220
+0.175
+0.0087
+0.0069
0.260T
0.175T
0.0102T
0.0069T
+0.255
+0.200
+0.0100
+0.0079
0.305T
0.200T
0.0120T
0.0079T
Resultant
Fit
mm
in.
mm
in.
r5
+0.027
+0.004
+0.0011
+0.0002
0.049T
0.004T
0.0020T
0.0002T
k5
r5
+0.029
+0.004
+0.0012
+0.0002
0.054T
0.004T
0.0019T
0.0002T
k5
r5
+0.032
+0.005
+0.0011
+0.0002
0.057T
0.005T
0.0021T
0.0002T
k5
+0.040
+0.010
+0.0016
+0.0004
0.070T
0.010T
0.0028T
0.0004T
0.055
+0.015
+0.0022
+0.0006
0.095T
0.015T
0.0037T
0.0006T
+0.065
+0.015
+0.0026
+0.0006
0.115T
0.015T
0.0045T
0.0006T
Symbol
Symbol
167
ISO + J PREFIX
Class B (Metric)
T= Tight
L = Loose
Tolerance
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
18.000
0.7087
-0.005
0.000
-0.0002
0.0000
+0.009
+0.001
+0.0004
+0.0001
0.014T
0.001T
0.0006T
0.0001T
18.000
0.7087
30.000
1.1811
-0.006
0.000
-0.0002
0.0000
+0.011
+0.002
+0.0005
+0.0001
30.000
1.1811
50.000
1.9685
-0.008
0.000
-0.0003
0.0000
50.000
1.9685
80.000
3.1496
80.000
3.1496
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
k5
+0.015
+0.007
+0.0006
+0.0003
0.020T
0.007T
0.0008T
0.0003T
0.017T
0.002T
0.0007T
0.0001T
k5
+0.017
+0.008
+0.0007
+0.0003
+0.013
+0.002
+0.0005
+0.0001
0.021T
0.002T
0.0008T
0.0001T
k5
-0.009
0.000
-0.0004
0.0000
+0.015
+0.002
+0.0006
+0.0001
0.024T
0.002T
0.0010T
0.0001T
120.000
4.7244
-0.010
0.000
-0.0004
0.0000
+0.018
+0.003
+0.0007
+0.0001
0.028T
0.003T
0.0011T
0.0001T
120.000
4.7244
180.000
7.0866
-0.013
0.000
-0.0005
0.0000
+0.021
+0.003
+0.0008
+0.0001
0.034T
0.003T
0.0013T
0.0001T
180.000
7.0866
200.000
7.8740
200.000
7.8740
225.000
8.8583
225.000
8.8583
250.000
9.8425
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
m5
+0.009
+0.001
+0.0004
+0.0001
0.014T
0.001T
0.0006T
0.0001T
k5
0.023T
0.008T
0.0009T
0.0003T
m5
+0.011
+0.002
+0.0005
+0.0001
0.017T
0.002T
0.0007T
0.0001T
k5
+0.020
+0.009
+0.0008
+0.0004
0.028T
0.009T
0.0011T
0.0004T
m5
+0.013
+0.002
+0.0005
+0.0001
0.021T
0.002T
0.0008T
0.0001T
k5
k5
+0.033
+0.020
+0.0013
+0.0008
0.042T
0.020T
0.0017T
0.0008T
n5
+0.015
+0.002
+0.0006
+0.0001
0.024T
0.002T
0.0010T
0.0001T
k5
k5
+0.033
+0.023
+0.0014
+0.0010
0.043T
0.023T
0.0018T
0.0010T
n4
+0.018
+0.003
+0.0007
+0.0001
0.028T
0.003T
0.0011T
0.0001T
k5
k5
+0.055
+0.043
+0.0023
+0.0018
0.068T
0.043T
0.0028T
0.0018T
p4
+0.021
+0.003
+0.0008
+0.0001
0.034T
0.003T
0.0013T
0.0001T
k5
+0.091
+0.077
+0.0036
+0.0030
0.106T
0.077T
0.0042T
0.0030T
+0.094
+0.080
+0.0037
+0.0031
0.109T
0.084T
0.0043T
0.0031T
r4
+0.024
+0.004
+0.0010
+0.0002
0.046T
0.004T
0.0015T
0.0002T
k5
250.000
9.8425
+0.098
+0.084
+0.0039
+0.0033
0.113T
0.084T
0.0044T
0.0033T
280.000
11.0236
+0.110
+0.094
+0.0043
+0.0037
0.128T
0.094T
0.0050T
0.0037T
r4
+0.027
+0.004
+0.0011
+0.0002
0.045T
0.004T
0.0018T
0.0002T
k5
Over
Incl.
mm
in.
mm
in.
10.000
0.3937
280.000
11.0236
168
Moderate Loads,
No Shock
315.000
12.4016
-0.015
0.000
-0.0006
0.0000
-0.018
0.000
-0.0007
0.00000
+0.024
+0.004
+0.0010
+0.0002
+0.027
+0.004
+0.0011
+0.0002
0.039T
0.004T
0.0015T
0.0002T
0.045T
0.004T
0.0018T
0.0002T
Symbol
k5
k5
+0.114
+0.098
+0.0045
+0.0039
0.132T
0.098T
0.0052T
0.0039T
Symbol
Symbol
ISO + J PREFIX
Classes A and AA (Metric)
T= Tight
L = Loose
Resultant
Fit
mm
in.
mm
in.
mm
in.
18.000
0.7087
-0.005
0.000
-0.0002
0.0000
+0.013
+0.005
+0.0005
+0.0002
0.018T
0.005T
0.0007T
0.0002T
18.000
0.7087
30.000
1.1811
-0.006
0.000
-0.0002
0.0000
+0.013
+0.005
+0.0005
+0.0002
30.000
1.1811
315.000
12.4016
-0.008
0.000
-0.0003
0.0000
+0.013
+0.005
+0.0005
+0.0002
Over
Incl.
mm
in.
mm
in.
10.000
0.3937
ISO + J Prefix
Classes 3 and 0,
Classes 00 and 000 (Inch)
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
0.019T
0.005T
0.0007T
0.0002T
0.021T
0.005T
0.0008T
0.0002T
T= Tight
L = Loose
Symbol
Moderate Loads,
No Shock
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
+0.013
+0.005
+0.0005
+0.0002
0.018T
0.005T
0.0007T
0.0002T
+0.013
+0.005
+0.0005
+0.0002
0.019T
0.005T
0.0007T
0.0002T
+0.013
+0.005
+0.0005
+0.0002
0.021T
0.005T
0.0008T
0.0002T
Symbol
Symbol
Moderate Loads,
No Shock
Inner Ring
Seat
Deviation
Resultant
Fit
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
304.800
12.0000
0.000
+0.013
0.0000
+0.0005
+0.031
+0.018
+0.0012
+0.0007
0.031T
0.005T
0.0012T
0.0002T
304.800
12.0000
609.600
24.0000
0.000
+0.025
0.0000
+0.0010
+0.064
+0.038
+0.0025
+0.0015
0.064T
0.013T
0.0025T
0.0005T
609.600
24.0000
914.400
36.0000
0.000
+0.038
0.0000
+0.0015
+0.102
+0.064
+0.0040
+0.0025
0.102T
0.026T
0.0040T
0.0010T
Heavy Loads,
High Speed
or Shock
Tolerance
Shaft O.D.
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
0.000
+0.008
0.0000
+0.0003
+0.020
+0.013
+0.0008
+0.0005
0.020T
0.005T
0.0008T
0.0002T
Use Minimum
Tight Inner
Ring Fit of
0.00025 mm/mm
(0.00025 in./in.)
of Inner Ring
Bore
169
TXR
Suggested fitting guidelines for ferrous shaft and housing
For heavy loads, high speed or shock, contact your Timken engineer
for further information.
TABLE 93. Precision Class TXR Tapered Roller Bearings Shaft O.D.
TXR Classes S and p (Metric)
TXR
Classes S and P (Metric)
Deviation from nominal
(maximum) bearing bore and
resultant fit.
T= Tight
L = Loose
Bearing Bore
Class S
Range
Class P
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
50.000
1.9685
0.020T
0.0008T
0.007T
0.0003T
0.014T
0.0006T
0.004T
0.0002T
50.000
1.9685
80.000
3.1496
0.025T
0.0010T
0.010T
0.0004T
0.017T
0.0007T
0.004T
0.0002T
80.000
3.1496
120.000
4.7244
0.033T
0.0013T
0.013T
0.0005T
0.017T
0.0007T
0.004T
0.0002T
120.000
4.7244
180.000
7.0866
0.052T
0.0021T
0.027T
0.0011T
0.017T
0.0007T
0.004T
0.0002T
180.000
7.0866
250.000
9.8425
0.060T
0.0024T
0.030T
0.0012T
0.020T
0.0008T
0.004T
0.0002T
250.000
9.8425
315.000
12.4016
0.070T
0.0028T
0.035T
0.0014T
0.022T
0.0009T
0.004T
0.0002T
315.000
12.4016
400.000
15.7480
0.077T
0.0030T
0.037T
0.0015T
0.024T
0.0009T
0.004T
0.0002T
400.000
15.7480
500.000
19.6850
0.085T
0.0034T
0.040T
0.0016T
0.030T
0.0012T
0.004T
0.0002T
Over
Incl.
mm
in.
TABLE 94. Precision Class TXR Tapered Roller Bearings Housing bore
TXR Classes S and P (Metric)
Bearing Bore
Class S
Range
170
Class P
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
50.000
1.9685
0.020T
0.0008T
0.007T
0.0003T
0.014T
0.0006T
0.004T
0.0002T
50.000
1.9685
80.000
3.1496
0.025T
0.0010T
0.010T
0.0004T
0.017T
0.0007T
0.004T
0.0002T
80.000
3.1496
120.000
4.7244
0.033T
0.0013T
0.013T
0.0005T
0.017T
0.0007T
0.004T
0.0002T
120.000
4.7244
180.000
7.0866
0.052T
0.0021T
0.027T
0.0011T
0.017T
0.0007T
0.004T
0.0002T
180.000
7.0866
250.000
9.8425
0.060T
0.0024T
0.030T
0.0012T
0.020T
0.0008T
0.004T
0.0002T
250.000
9.8425
315.000
12.4016
0.070T
0.0028T
0.035T
0.0014T
0.022T
0.0009T
0.004T
0.0002T
315.000
12.4016
400.000
15.7480
0.077T
0.0030T
0.037T
0.0015T
0.024T
0.0009T
0.004T
0.0002T
400.000
15.7480
500.000
19.6850
0.085T
0.0034T
0.040T
0.0016T
0.030T
0.0012T
0.004T
0.0002T
Over
Incl.
mm
in.
TABLE 95. Precision Class TXR Tapered Roller Bearings Shaft O.D.
TXR Classes 3 and 0 (Inch)
TXR
Classes 3 and 0 (Inch)
Deviation from nominal
(maximum) bearing bore and
resultant fit.
T= Tight
L = Loose
Bearing Bore
Class 3
Range
Class 0
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
304.800
12.0000
0.037T
0.0015T
0.013T
0.0005T
0.020T
0.0008T
0.007T
0.0003T
304.800
12.0000
609.600
24.0000
0.077T
0.0030T
0.025T
0.0010T
0.037T
0.0015T
0.013T
0.0005T
609.600
24.0000
914.400
36.0000
0.114T
0.0045T
0.037T
0.0015T
914.400
36.0000
1219.200
48.0000
0.152T
0.0060T
0.051T
0.0020T
1219.200
48.0000
0.191T
0.0075T
0.064T
0.0025T
Over
Incl.
mm
in.
TABLE 96. Precision Class TXR Tapered Roller Bearings Housing bore
TXR Classes 3 and 0 (Inch)
Bearing Bore
Class 3
Range
Class 0
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
304.800
12.0000
0.037T
0.0015T
0.013T
0.0005T
0.020T
0.0008T
0.007T
0.0003T
304.800
12.0000
609.600
24.0000
0.077T
0.0030T
0.025T
0.0010T
0.037T
0.0015T
0.013T
0.0005T
609.600
24.0000
914.400
36.0000
0.114T
0.0045T
0.037T
0.0015T
914.400
36.0000
1219.200
48.0000
0.152T
0.0060T
0.051T
0.0020T
1219.200
48.0000
0.191T
0.0075T
0.064T
0.0025T
Over
Incl.
mm
in.
171
Thrust Bearings
Thrust Ball Bearings
Shaft and housing diameters shown as variance from nominal
dimensions.
Shaft Diameter
Bearing Bore
Nominal (Min.)
Interference Fit(1)
Loose Fit(2)
Over
Incl.
Max.
Min.
Over
Incl.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
171.450
6.7500
+0.000
+0.0000
-0.030
-0.0012
0.000
0.0000
504.825
19.8750
+0.076
+0.0030
+0.000
+0.0000
-0.152
-0.0060
-0.076
-0.0030
171.450
6.7500
508.000
20.0000
+0.000
+0.0000
-0.038
-0.0015
504.825
19.8750
1524.000
60.0000
+0.127
+0.0050
+0.000
+0.0000
-0.254
-0.0100
-0.127
-0.0050
Housing Diameter
Housing Diameter
Interference Fit(1)
Loose Fit(2)
Over
Incl.
Max.
Min.
Over
Incl.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
119.858
4.7188
441.325
17.3750
+0.229
+0.0090
+0.127
+0.0050
0.000
0.0000
584.000
23.0000
-0.152
-0.0060
-0.076
-0.0030
+0.152
+0.0060
0.076
0.0030
441.325
17.3750
1000.000
39.3701
+0.254
+0.0100
+0.152
+0.0060
584.000
23.0000
1778.000
70.0000
-0.254
-0.0100
-0.127
-0.0050
+0.254
+0.0100
0.127
0.0050
172
shaft and
housing
thrust
spherical
rollerfits
bearings
Tolerances for housing bore and for shaft diameters are shown as variance from nominal bearing
dimension. When application calls for thrust loads only, the housing must be relieved by 116 in.
on diameter so that no radial load is carried on the bearing.
Housing Bore
Shaft Diameter
Shaft Diameter
Stationary Load
Rotation Load
Bearing O.D.
Nominal (Max.)
Inches
Housing Bore
Springs in
Housing Light
Radial Load
Rotating
Outer Ring
Over
Incl.
Max.
Min.
Max.
Min.
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
80.000
3.1496
120.000
4.7244
+0.013
+0.0005
-0.010
-0.0004
+0.025
+0.0010
+0.003
+0.0001
180.000
7.0866
250.000
9.8425
+0.061
+0.0024
+0.015
+0.0006
+0.028
+0.0011
-0.018
-0.0007
+0.013
+0.0005
-0.033
-0.0013
120.000
4.7244
180.000
7.0866
+0.015
+0.0006
-0.010
-0.0004
+0.028
+0.0011
+0.003
+0.0001
250.000
9.8425
315.000
12.0416
+0.069
+0.0027
+0.018
+0.0007
+0.033
+0.0013
-0.018
-0.0007
+0.015
+0.0006
-0.036
-0.0014
180.000
7.0866
200.000
7.8740
+0.018
+0.0007
-0.013
-0.0005
+0.036
+0.0014
+0.005
+0.0002
315.000
12.0416
400.000
15.7480
+0.074
+0.0029
+0.018
+0.0007
+0.038
+0.0015
-0.018
-0.0007
+0.015
+0.0006
-0.041
-0.0016
200.000
7.8740
240.000
9.4488
+0.018
+0.0007
-0.013
-0.0005
+0.046
+0.0018
+0.015
+0.0006
400.000
15.7480
500.000
19.6850
+0.084
+0.0033
+0.020
+0.0008
+0.041
+0.0016
-0.023
-0.0009
+0.018
+0.0007
-0.046
-0.0018
240.000
9.4488
315.000
12.0416
+0.018
+0.0007
-0.015
-0.0006
+0.051
+0.0020
+0.020
+0.0008
500.000
19.6850
630.000
24.8031
+0.091
+0.0036
+0.023
+0.0009
+0.046
+0.018
-0.023
-0.0009
+0.020
+0.0008
-0.048
-0.0019
315.000
12.0416
400.000
15.7480
+0.018
+0.0007
-0.018
-0.0007
+0.056
+0.0022
+0.020
+0.0008
630.000
24.8031
800.000
31.4960
+0.102
+0.0040
+0.023
+0.0009
+0.051
+0.0020
-0.023
-0.0009
+0.023
+0.0009
-0.051
-0.0020
400.000
15.7480
500.000
19.6850
+0.023
+0.0009
-0.018
-0.0007
+0.086
+0.0034
+0.046
+0.0018
+0.025
+0.0010
+0.058
+0.0023
-0.025
-0.0010
+0.025
+0.0010
-0.058
-0.0023
500.000
19.6850
630.000
24.8031
+0.023
+0.0009
-0.020
-0.0008
+0.086
+0.0034
+0.043
+0.0017
+0.028
+0.0011
+0.066
+0.0026
-0.028
-0.0011
+0.030
+0.0012
-0.064
-0.0025
173
TP
TPS
TABLE 103. Type TP and TPS ShafT FITS
Bearing O.D.
Nominal (Min.)
174
Shaft Diameter
Housing Diameter
Deviation from D
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
50.800
2.0000
60.325
2.3750
+0.038
+0.0015
+0.013
+0.0005
60.325
2.3750
82.550
3.2500
+0.043
+0.0017
+0.018
+0.0007
82.550
3.2500
93.663
3.6875
+0.048
+0.0019
+0.023
+0.0009
93.663
3.6875
101.600
4.0000
+0.053
+0.0021
+0.028
+0.0011
101.600
4.0000
115.092
4.5312
+0.071
+0.0028
+0.033
+0.0013
115.092
4.5312
254.000
10.0000
+0.076
+0.0030
+0.038
+0.0015
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
254.000
10.0000
457.200
18.0000
+0.102
+0.0040
+0.051
+0.0020
47.625
1.8750
53.975
2.1250
-0.025
-0.0010
-0.051
-0.0020
457.200
18.0000
558.800
22.0000
+0.127
+0.0050
+0.064
+0.0025
53.975
2.1250
63.500
2.5000
-0.028
-0.0011
-0.053
-0.0021
558.800
22.0000
660.400
26.0000
+0.140
+0.0055
+0.064
+0.0025
63.500
2.5000
76.200
3.0000
-0.030
-0.0012
-0.056
-0.0022
660.400
26.0000
711.200
28.0000
+0.152
+0.0060
+0.076
+0.0030
76.200
3.0000
88.900
3.5000
-0.033
-0.0012
-0.058
-0.0023
711.200
28.0000
863.600
34.0000
+0.178
+0.0070
+0.076
+0.0030
88.900
3.5000
177.800
7.0000
-0.038
-0.0015
-0.064
-0.0025
863.600
34.0000
965.200
38.0000
+0.203
+0.0080
+0.089
+0.0035
177.800
7.0000
228.600
9.0000
-0.038
-0.0015
-0.076
-0.0030
965.200
38.0000
1117.600
44.0000
+0.229
+0.0090
+0.102
+0.0040
228.600
9.0000
304.800
12.0000
-0.046
-0.0018
-0.084
-0.0033
304.800
12.0000
381.000
15.0000
-0.051
-0.0020
-0.089
-0.0035
381.000
15.0000
482.600
19.0000
-0.051
-0.0020
-0.102
-0.0040
482.600
19.0000
584.200
23.0000
-0.064
-0.0025
-0.114
-0.0045
584.200
23.0000
762.000
30.0000
-0.076
-0.0030
-0.140
-0.0055
Housing Diameter
Deviation from D
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
115.092
4.5312
254.000
10.0000
+0.076
+0.0030
+0.038
+0.0015
254.000
10.0000
457.200
18.0000
+0.102
+0.0040
+0.051
+0.002
457.200
18.0000
558.800
22.0000
+0.127
+0.0050
+0.064
+0.0025
558.800
22.0000
660.400
26.0000
+0.140
+0.0055
+0.064
+0.0025
660.400
26.0000
711.200
28.0000
+0.152
+0.0060
+0.076
+0.0030
711.200
28.0000
863.600
34.0000
+0.178
+0.0070
+0.076
+0.0030
863.600
34.0000
965.200
38.0000
+0.203
+0.0080
+0.089
+0.0035
965.200
38.0000
1117.600
44.0000
+0.229
+0.0090
+0.102
+0.0040
TTVS
TTHDFL
Shaft Diameter
Housing Bore
Over
Incl.
Min.(1)
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
304.800
12.0000
-0.051
-0.0020
161.925
6.3750
265.113
10.4375
+0.060
+0.0025
+0.025
+0.0010
304.800
12.0000
508.000
20.0000
-0.051
-0.0020
265.113
10.3475
317.500
12.5000
+0.076
+0.0030
+0.025
+0.0010
508.000
20.0000
711.200
28.0000
-0.076
-0.0030
317.500
12.5000
482.600
19.0000
+0.102
+0.0040
+0.051
+0.0020
711.200
28.0000
1219.200
48.0000
-0.102
-0.0040
482.600
19.0000
603.250
23.7500
+0.113
+0.0045
+0.051
+0.0020
1219.200
48.0000
1727.200
68.0000
-0.127
-0.0050
603.250
23.7500
711.200
28.0000
+0.152
+0.0060
+0.076
+0.0030
711.200
28.0000
838.200
33.0000
+0.178
+0.0070
+0.076
+0.0030
TABLE 108. THRUST tapered Roller Bearings TTHD BEARINGS FITTING GUIDELINES
Rotating Ring
Bore
Class 2
Stationary Ring
Class 3
Over
Incl.
Tolerance
Shaft O.D.
Deviation
Resultant
Fit
Tolerance
Shaft O.D.
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
304.800
0.0000
12.0000
0.000
+0.025
0.0000
+0.0010
+0.076
+0.050
+0.0030
+0.0020
0.076T
0.025T
0.0030T
0.0010T
0.000
+0.013
0.0000
+0.0005
+0.051
+0.038
+0.0020
+0.0015
0.051T
0.025T
0.0020T
0.0010T
304.800
609.600
12.0000
24.0000
0.000
+0.051
0.0000
+0.0020
+0.152
+0.102
+0.0060
+0.0040
0.152T
0.051T
0.0060T
0.0020T
0.000
+0.025
0.0000
+0.0010
+0.102
+0.076
+0.0040
+0.0030
0.102T
0.051T
0.0040T
0.0020T
609.600
914.400
24.0000
36.0000
0.000
+0.076
0.0000
+0.0030
+0.204
+0.127
+0.0080
+0.0050
0.204T
0.051T
0.0080T
0.0020T
0.000
+0.038
0.0000
+0.0015
+0.127
+0.089
+0.0050
+0.0035
0.127T
0.051T
0.0050T
0.0020T
914.400
1219.200
36.0000
48.0000
0.000
+0.102
0.0000
+0.0040
+0.254
+0.153
+0.0100
+0.0060
0.254T
0.051T
0.0100T
0.0020T
0.000
+0.051
0.0000
+0.0020
+0.153
+0.102
+0.0060
+0.0040
0.153T
0.051T
0.0060T
0.0020T
0.000
+0.127
0.0000
+0.0050
+0.305
+0.178
+0.0120
+0.0070
0.305T
0.051T
0.0120T
0.0020T
0.000
+0.076
0.0000
+0.0030
+0.204
+0.127
+0.0080
+0.0050
0.204T
0.051T
0.0080T
0.0020T
1219.200
48.0000
Class 2 and 3
TTHD
- Rotating ring O.D. must have
a minimum radial clearance of
2.5 mm (0.1 in.).
All
sizes
Provide a
minimum
radial
clearance
of
2.5 mm
(0.1 in.)
between
ring bore
and shaft
O.D.
175
OPERATING TEMPERATURES
OPERATING TEMPERATURES
Bearings operate in a wide range of applications and environments.
In most cases, bearing operating temperature is not an issue.
Some applications, however, operate at extreme speeds or in
extreme temperature environments. In these cases, care must
be taken not to exceed the temperature limits of the bearing.
Minimum temperature limits are primarily based on lubricant
capability. Maximum temperature limits are most often based on
material and/or lubricant constraints, but also may be based on
accuracy requirements of the equipment that the bearings are
built into. These constraints/limitations are discussed below.
S0
150
302
S1
200
392
S2
250
482
S3
300
572
S4
350
662
176
Lubrication limitations
Starting torque in grease-lubricated applications typically increases
significantly at cold temperatures. Starting torque is not primarily
a function of the consistency or channel properties of the grease.
Most often, it is a function of the rheological properties of the
grease.
The high-temperature limit for greases is generally a function of the
thermal and oxidation stability of the base oil in the grease and the
effectiveness of the oxidation inhibitors.
See the Lubrication and Seals section on page 191 for more
information on lubrication limitations.
Equipment requirements
The equipment designer must evaluate the effects of temperature
on the performance of the equipment being designed. Precision
machine tool spindles, for example, can be very sensitive to thermal
expansions. For some spindles, it is important that the temperature
rise over ambient be held to 20 C to 35 C (36 F to 45 F).
Most industrial equipment can operate at considerably higher
temperatures. Thermal ratings on gear drives, for example, are
based on 93 C (200 F). Equipment such as gas turbines operates
continuously at temperatures above 100 C (212 F). Running at high
temperatures for extended periods of time, however, may affect
shaft and housing fits, if the shaft and housing are not machined
and heat-treated properly .
OPERATING TEMPERATURES
Temp.
F
Hardness
HRC
1C
0.51.5Cr
0.35Mn
70
60
1C
0.51.5Cr
0.35Mn
70
350
450
58
56
54
Deep-hardening
steels for heavy sections per ASTM A485
1C
11.8Cr
11.5Mn .06Si
70
450
600
58
55
52
Material
70
58
70
58
-73 C -54 C -17 C 38 C 93 C 121 C 149 C 204 C 260 C 316 C 371 C 427 C
-100 F -65 F 0 F 100 F 200 F 250 F 300 F 400 F 500 F 600 F 700 F 800 F
STANDARD DIMENSIONAL
STABILIZATION
<0.0001 in./in dimensional change in
2500 hours at 100 C (212 F). Good
oxidation resistance.
Corrosion-resistant
440C stainless steel
per ASTM A756
1C 18Cr
Corrosion-resistant
440C stainless steel
per ASTM A756
1C 18Cr
70
450
600
58
55
52
M-50
medium
high speed
4Cr 4Mo
1V 0.8C
70
450
600
60
59
57
Note: Dimensional stability data shown above is the permanent metallurgical growth and/or shrinkage only. Thermal expansion
effects are not included. For operating temperatures above 427 C (800 F), consult your Timken engineer.
177
OPERATING TEMPERATURES
CAGES
Molded 6/6 nylon (PRB)
Molded 6/6 fiberglass
reinforced nylon (PRC)
Phenolic resin laminate
Low-carbon pressed steel
Pressed stainless steel
Machined bronze
Machined iron-silicon bronze
Machined steel
Shields
Low-carbon steel
Stainless steel
Nylon
Seals
Buna N
Polyacrylic
Fluoroelastomer
Stabilized TFE fluorocarbon(1)
TFE fluorocarbon(1) (with glass fabric)
(1)Limited life above these temperatures.
178
OPERATING TEMPERATURES
HEAT GENERATION AND DISSIPATION
heat dissipation
heat generation
179
TORQUE
Tapered Roller Bearings
TORQUE
Tapered Roller Bearings
Running torque-M
The rotational resistance of a rolling bearing depends on load, speed,
lubrication conditions and internal bearing characteristics.
The following formulas yield approximations to values of bearing
running torque. The formulas apply to bearings lubricated by oil.
For bearings lubricated by grease or oil mist, torque is usually
lower, although for grease lubrication this depends on amount
and consistency of the grease. The formulas also assume the
bearing running torque has stabilized after an initial period
referred to as running-in.
Bearing A
Bearing B
Bearing A
Bearing B
n
F ae
F rA
F rB
F ae
F rB
F rA
0.47 FrA
KA
KB
( )
( )
M = k1 G1 (n)0.62
nmin =
k2
G2
f2 Fr
f3 Fr
K
2/3
180
0.3
TORQUE
Tapered Roller Bearings
F rAB
FrC
F rAB
Bearing B
Bearing A
Fae
Fixed bearing
Bearing C
Bearing B
Bearing A
Fae
Fixed bearing
FrA = FrAB
KA
FaA = Fae
nmin =
Fae
0.47 FrAB
FrA
KA
FrB
F rAB
FrAB +
1.06 K Fae
2
( )
( )
Bearing A
= 2 k1 G1 (n) 0.62
nmin =
Fae
k2
G2
0.890 Fr
0.030 FrC
FrAB
1.06 K Fae
2
nminA =
f3 FrAB
0.3
2/3
f2 FrAB
K
0.3
0.060
k2 1.78FrA
K
G2
2/3
(FrA0.3 + FrB0.3 )
nminB =
( )
k2 1.78FrB
G2
K
2/3
FrC
Bearing C
Bearing B
0.3
2/3
k2
G2
M = k1 G1 (n)0.62
F rAB
Bearing B
Bearing A
( )
( )
( )
( )
M = k1 G1 (n)0.62
Fae
Floating bearing
The torque equations will be underestimated if operating speed, n, is less than nmin.
For values of f1 and f2, refer to Fig. 142 on page 182.
181
TORQUE
Tapered Roller Bearings
2.8
2.6
2.4
2.2
f2
2.0
1.8
1.6
1.4
f3
1.2
1.0
0.8
0.6
0.4
0.2
0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
KFa/Fr
Load Condition
f3 and f2
f3 = KFa/Fr
f3 = 0.06
f2 = f3 + 0.8
f3 = 1.78
182
TORQUE
Tapered Roller Bearings
10000
7500
5000
4000
3000
2000
1000
750
500
400
300
200
100
80
60
50
40
30
25
1500
20
18
16
14
1000
680
460
12
150
320
10
9
220
150
7
6
100
5
4.5
68
4
46
3.5
22
32
220
240 F
Temperature
Fig. 143. Viscosities in mPa.s (centipoise, cP) for ISO/ASTM industrial fluid lubricant
grade designations. Assumes: viscosity index 90; specific gravity 0.875 at 40 C (104 F).
183
TORQUE
CYLINDRICAL AND SPHERICAL ROLLER AND BALL BEARINGS
2/
3 dm3
f1 F dm + 10-7 f0 (v x n)
if (v x n) 2000
Dimension
Series
f0
f1
18
28
38
39
00
02
03
04
1.7
1.7
1.7
1.7
1.7
2
2.3
2.3
0.00010
0.00010
0.00010
0.00015
0.00015
0.00020
0.00020
0.00020
02
03
2
3
0.00025
0.00035
32
33
5
7
0.00035
0.00035
02
03
2
3
0.00037
0.00037
10
02
22
03
23
04
2
2
3
2
4
2
0.00020
0.00030
0.00040
0.00035
0.00040
0.00040
18
29
30
22
23
5
6
7
8
12
0.00055
0.00055
0.00055
0.00055
0.00055
30
39
40
31
41
22
32
03
23
4.5
4.5
6.5
5.5
7
4
6
3.5
4.5
0.00017
0.00017
0.00027
0.00027
0.00049
0.00019
0.00036
0.00019
0.00030
48
49
50
9
11
13
0.00055
0.00055
0.00055
11
12
3
4
0.00150
0.00150
92
93
94
2.5
2.5
3
0.00023
0.00023
0.00030
F = max
0.8Fa cot
or
Fr
184
SPEED RATINGS
radial ball bearings, spherical and cylindrical roller bearings
Speed Ratings
Radial Ball Bearings
There is no precise method for determining the maximum speed
at which a ball bearing may operate. Bearing characteristics
and features of surrounding parts, shafts, housing and other
components as well as basic service conditions are all variables
dependent upon each other for continued satisfactory high-speed
performance.
The safe operating speed of a bearing is often limited by the
temperature within the bearing, which, in turn, is dependent
upon the temperature surrounding the application, accuracy of
bearings, shafts, housings, auxiliary parts, etc., and the type and
amount of lubricant.
Radial bearings with proper internal refinements will operate at
high speeds for long periods if properly installed and lubricated.
Tolerance grade, cage design, and lubricant are bearing
characteristics which affect speed limitations.
Bearings with ISO P0 tolerances are generally satisfactory for
normal speeds with grease or oil lubrication.
Ball bearings with ISO P5 tolerances or better and ring-piloted
composition cages lubricated with an efficient, non-churning,
cooling oil-mist system have exceptional high-speed ability.
In the case of duplex mountings, as frequently used in high-speed
machine tool spindles, bearing preload and contact angle affect
the permissible speeds.
The values in table 115 may be used as a general guide for
determining the safe maximum speed of standard types of Timken
ball bearings. To obtain the speed value for any bearing size with
inner ring rotating, multiply the pitch diameter in millimeters (or,
in the case of extra-small inch dimension bearings, the nearest
millimeter equivalent) by the speed in revolutions per minute.
Refer to table 116 on page 186 for the most suitable bearing type,
cage style, tolerance guide and type of lubrication.
For outer ring rotation of ball bearings, multiply the speed value
(pitch or mean dia. in. mm x RPM of the outer ring) by the following
factors before referring to the table of speed values.
TABLE 115. Ball Bearing Series Factor
Extra-small (30 and S) and extra-light (9100 and M9300)
1.3
1.5
1.7
Temperature.
Bearing setting or clearance.
Lubrication.
Bearing design.
The relative importance of each of these factors depends on
the nature of the application. The effect of each factor is not
isolated each contributes in varying degrees, depending on the
application and overall speed capability of the design.
An understanding of how each of these factors affects
performance as speeds change is required to achieve the speed
capabilities inherent in a bearing.
185
SPEED RATINGS
radial ball bearings, spherical and cylindrical roller bearings
The thermal speed ratings are for reference only and can be
considerably lower or higher depending on your application.
Consult your Timken engineer for more accurate information
regarding a bearings speed limitations in your application.
Cage Type
Grease
ISO P6
Oil(1)
Grease
Oil(1)
ISO P5 and 4
Grease
Grease
Circulating
Oil(1)
Oil Mist
SINGLE-ROW
Non-filling slot
9300K, 9100K
250000
300000
250000
300000
300000
300000
300000
200K,
300000
350000
300000
350000
350000
400000
450000
300K,
350000
400000
350000
450000
400000
550000
650000
Composition (CR)
250000
250000
Filling slot
200W and variations
300W and variations
Angular contact
250000
300000
200000
300000
300000
350000
7200WN
300000
400000
7300WN
350000
400000
350000
400000
350000
400000
750000
1000000
1200000
1000000
1400000
1700000
5300
250000
300000
* Bore + O.D.
2
(1) For oil bath lubrication, oil level should be maintained covering between 13 to 12 up from the bottom of the lowest ball.
Note: Single or double normal contact (P or PP) sealed bearings should not exceed 300000 PDN.
Consult your Timken engineer for limiting speed of RR or Tri-Ply sealed bearings.
186
speed ratings
Tapered Roller Bearings
Dmn
12
(m/s)
Circulating oil
Oil level
(ft/min)
Grease
0 10 20 30 40 50 100
200 m/s
0 2000 4000 6000 8000 10000
20000 40000
Where:
Dm
mm, in.
= Bearing speed
rev/min
Fig. 144. Inner ring rib diameter. The inner ring rib diameter
may be scaled from a print.
The mean large rib diameter at the midpoint of the roller end
contact can be scaled from a drawing of the bearing, if available,
or this diameter can be determined by consulting your Timken
engineer. The inner, inner ring mean large rib diameter can be
approximated by taking 99 percent of larger rib O.D.
DN values (the product of the inner ring bore in mm and the speed
in rev/min) are often used as a measure of bearing speed by other
bearing manufacturers. There is no direct relationship between
the rib speed of a tapered roller bearing and DN value because of
the wide variation in bearing cross sectional thickness. However,
for rough approximation, one meter per second rib speed is about
equal to 16000 DN for average section bearings. One foot per
minute is equal to approximately 80 DN.
187
CONVERSION TABLES
CONVERSION TABLES
TABLE 118. Viscosity conversion table
Saybolt
(Sec.)
Redwood
(Sec.)
Engler
(Deg.)
Saybolt
(Sec.)
Redwood
(Sec.)
Engler
(Deg.)
SUS
SUS
35
32.2
1.18
40
36.2
1.32
2.7
450
397
12.8
97.4
4.3
475
419
13.5
45
40.6
103
1.46
5.9
500
441
14.2
50
108
44.9
1.60
7.4
550
485
15.6
119
55
49.1
1.75
8.9
600
529
17.0
130
60
53.5
1.88
10.4
650
573
18.5
141
65
57.9
2.02
11.8
700
617
19.9
152
70
62.3
2.15
13.1
750
661
21.3
163
75
67.6
2.31
14.5
800
705
22.7
173
80
71.0
2.42
15.8
850
749
24.2
184
85
75.1
2.55
17.0
900
793
25.6
195
90
79.6
2.68
18.2
950
837
27.0
206
95
84.2
2.81
19.4
1000
882
28.4
217
100
88.4
2.95
20.6
1200
1058
34.1
260
110
97.1
3.21
23.0
1400
1234
39.8
302
120
105.9
3.49
25.0
1600
1411
45.5
347
130
114.8
3.77
27.5
1800
1587
51
390
140
123.6
4.04
29.8
2000
1763
57
433
150
132.4
4.32
32.1
2500
2204
71
542
160
141.1
4.59
34.3
3000
2646
85
650
Centistokes
cSt
cSt
170
150.0
4.88
36.5
3500
3087
99
758
180
158.8
5.15
38.8
4000
3526
114
867
190
167.5
5.44
41.0
4500
3967
128
974
200
176.4
5.72
43.2
5000
4408
142
1082
220
194.0
6.28
47.5
5500
4849
156
1150
240
212
6.85
51.9
6000
5290
170
1300
260
229
7.38
56.5
6500
5730
185
1400
280
247
7.95
60.5
7000
6171
199
1510
300
265
8.51
64.9
7500
6612
213
1630
325
287
9.24
70.3
8000
7053
227
1740
350
309
9.95
75.8
8500
7494
242
1850
375
331
10.7
81.2
9000
7934
256
1960
400
353
11.4
86.8
9500
8375
270
2070
425
375
12.1
92.0
10000
8816
284
2200
188
Centistokes
CONVERSION TABLES
10
11
12
13
14
15
0.0000
0.000
25.400
50.800
76.200
101.600
127.000
152.400
177.800
203.200
228.600
254.000
279.400
304.800
330.200
355.600
381.000
116
0.0625
1.588
26.988
52.388
77.788
103.188
128.588
153.988
179.388
204.788
230.188
255.588
280.988
306.388
331.788
357.188
382.588
18
0.1250
3.175
28.575
53.975
79.375
104.775
130.175
155.575
180.975
206.375
231.775
257.175
282.575
307.975
333.375
358.775
384.175
316
0.1875
4.763
30.162
55.562
80.962
106.362
131.762
157.162
182.562
207.962
233.362
258.762
284.162
309.562
334.962
360.362
385.762
14
0.2500
6.350
31.750
57.150
82.550
107.950
133.350
158.750
184.150
209.550
234.950
260.350
285.750
311.150
336.550
361.950
387.350
516
0.3125
7.938
33.338
58.738
84.138
109.538
134.938
160.338
185.735
211.138
236.538
261.938
287.338
312.738
338.138
363.538
388.938
38
0.3750
9.525
34.925
60.325
85.725
111.125
136.525
161.925
187.325
212.725
238.125
263.525
288.925
314.325
339.725
365.125
390.525
716
0.4375
11.112
36.512
61.912
87.312
112.712
138.112
163.512
188.912
214.312
239.712
265.112
290.512
315.912
341.312
366.712
392.112
12
0.5000
12.700
38.100
63.500
88.900
114.300
139.700
165.100
190.500
215.900
241.300
266.700
292.100
317.500
342.900
368.300
393.700
916
0.5625
14.288
39.688
65.088
90.488
115.888
141.288
166.688
192.088
217.488
242.888
268.288
293.688
319.088
344.488
369.888
395.288
58
0.6250
15.875
41.275
66.675
92.075
117.475
142.875
168.275
193.675
219.075
244.475
269.875
295.275
320.675
346.075
371.475
396.875
1116
0.6875
17.462
42.862
68.262
93.662
119.062
144.462
169.862
195.262
220.662
246.062
271.462
296.862
322.262
347.662
373.062
398.462
34
0.7500
19.050
44.450
69.850
95.250
120.650
146.050
171.450
196.850
222.250
247.650
273.050
298.450
323.850
349.250
374.650
400.050
1316
0.8125
20.638
46.038
71.438
96.838
122.238
147.638
173.038
198.438
223.838
249.238
274.638
300.038
325.438
350.838
376.238
401.638
78
0.8750
22.225
47.625
73.025
98.425
123.825
149.225
174.625
200.025
225.425
250.825
276.225
301.625
327.025
352.425
377.825
403.225
1516
0.9375
23.812
49.212
74.612
100.012
125.412
150.812
176.212
201.612
227.012
252.412
277.812
303.212
328.612
354.012
379.412
404.812
inches
1/100 in.
10
254
25.4
279.4
50.8
304.8
76.2
330.2
101.6
355.6
127
381
152.4
406.4
177.8
431.8
203.2
457.2
228.6
482.6
1/1000 in.
1/10000 in.
1/10 mm
1/100 mm
1/1000 mm
in.
mm
in.
mm
in.
mm
in.
mm
mm
in.
mm
in.
mm
in.
0.1
2.54
0.01
0.254
0.001
0.0254
0.0001
0.00254
0.1
0.00394
0.01
0.00039
0.001
0.000039
0.2
5.08
0.02
0.508
0.002
0.0508
0.0002
0.00508
0.2
0.00787
0.02
0.00079
0.002
0.000079
0.3
7.62
0.03
0.762
0.003
0.0762
0.0003
0.00762
0.3
0.01181
0.03
0.00118
0.003
0.000118
0.4
10.16
0.04
1.016
0.004
0.1016
0.0004
0.01016
0.4
0.01575
0.04
0.00157
0.004
0.000157
0.5
12.70
0.05
1.270
0.005
0.1270
0.0005
0.01270
0.5
0.01969
0.05
0.00197
0.005
0.000197
0.6
15.24
0.06
1.524
0.006
0.1524
0.0006
0.01524
0.6
0.02362
0.06
0.00236
0.006
0.000236
0.7
17.78
0.07
1.778
0.007
0.1778
0.0007
0.01778
0.7
0.02756
0.07
0.00276
0.007
0.000276
0.8
20.32
0.08
2.032
0.008
0.2032
0.0008
0.02032
0.8
0.03150
0.08
0.00315
0.008
0.000315
0.9
22.86
0.09
2.286
0.009
0.2286
0.0009
0.02286
0.9
0.03543
0.09
0.00354
0.009
0.000354
mm
10
20
30
40
50
60
70
80
90
mm
100
200
300
0.39370
0.78740
1.18110
1.57480
1.96850
2.36220
2.75591
3.14961
3.93701
7.87402
11.81100
12.20470
0.03937
0.43307
0.82677
1.22047
1.61417
2.00787
2.40157
2.79528
3.18898
10
0.39370
4.33071
8.26772
0.07874
0.47244
0.86614
1.25984
1.65354
2.04724
2.44094
2.83465
3.22835
20
0.78740
4.72441
8.66142
12.59840
0.11811
0.51181
0.90551
1.29921
1.69291
2.08661
2.48031
2.87402
3.26772
30
1.18110
5.11811
9.05512
12.99210
0.15748
0.55118
0.94488
1.33858
1.73228
2.12598
2.51969
2.91339
3.30709
40
1.57480
5.51181
9.44882
13.38580
0.19685
0.59055
0.98425
1.37795
1.77165
2.16535
2.55906
2.95276
3.34646
50
1.96850
5.90551
9.84252
13.77950
10.23620 14.17320
0.23622
0.62992
1.02362
1.41732
1.71102
2.20472
2.59843
2.99213
3.38583
60
2.36220
6.29921
0.27559
0.66929
1.06299
1.45669
1.85039
2.24409
2.63780
3.03150
3.42520
70
2.75591
6.69291
10.62990 14.56690
0.31496
0.70866
1.10236
1.49606
1.88976
2.28346
2.67717
3.07087
3.46457
80
3.14961
7.08661
11.02360 14.96060
0.35433
0.74803
1.14173
1.53543
1.92913
2.32283
2.71654
3.11024
3.50394
90
3.54331
7.48031
11.41730 15.35430
189
CONVERSION TABLES
Rockwell Superficial
Hardness Number
Superficial Brale Penetrator
Rockwell Hardness
Number
Rockwell
C-Scale
Hardness
Number
Diamond
Pyramid
Hardness
Number
Vickers
Standard
Ball
Hultgren
Ball
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
940
900
865
832
800
772
746
720
697
674
653
633
613
595
577
560
544
528
513
498
484
471
458
446
434
500
487
475
464
451
442
432
421
409
613
599
587
575
561
546
534
519
508
494
481
469
455
443
432
421
409
739
722
705
688
670
654
634
615
595
577
560
543
525
512
496
481
469
455
443
432
421
409
85.6
85
84.5
83.9
83.4
82.8
82.3
81.8
81.2
80.7
80.1
79.6
79
78.5
78
77.4
76.8
76.3
75.9
75.2
74.7
74.1
73.6
73.1
72.5
76.9
76.1
75.4
74.5
73.8
73
72.2
71.5
70.7
69.9
69.2
68.5
67.7
66.9
66.1
65.4
64.6
63.8
63.1
62.1
61.4
60.8
60
59.2
58.5
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
423
412
402
392
382
372
363
354
345
336
327
318
310
302
294
286
279
272
266
260
254
248
243
238
400
390
381
371
362
353
344
336
327
319
311
301
294
286
279
271
264
258
253
247
243
237
231
226
400
390
381
371
362
353
344
336
327
319
311
301
294
286
279
271
264
258
253
247
243
237
231
226
400
390
381
371
362
353
344
336
327
319
311
301
294
286
279
271
264
258
253
247
243
237
231
226
72
71.5
70.9
70.4
69.9
69.4
68.9
68.4
67.9
67.4
66.8
66.3
65.8
65.3
64.7
64.3
63.8
63.3
62.8
62.4
62
61.5
61
60.5
(109)
(108.5)
(108)
(107.5)
(107)
(106)
(105.5)
(104.5)
(104)
(103)
(102.5)
(101.5)
(101)
100
99
98.5
97.8
57.7
56.9
56.2
55.4
54.6
53.8
53.1
52.3
51.5
50.8
50
49.2
48.4
47.7
47
46.1
45.2
44.6
43.8
43.1
42.1
41.6
40.9
40.1
190
Tensile Rockwell
Shore
B-Scale
D-Scale
A-Scale
Tungsten
15-N Scale 30-N Scale 45-N Scale Scleroscope Strength C-Scale
100 kg Load
100 kg
Carbide 60 kg Load
15 kg Load 30 kg Load 45 kg Load Hardness (approx.) Hardness
116 in. Dia.
Penetrator
Penetrator
Ball
1000 psi Number
Number
Ball
93.2
92.9
92.5
92.2
91.8
91.4
91.1
90.7
90.2
89.8
89.3
88.9
88.3
87.9
87.4
86.9
86.4
85.9
85.5
85
84.5
83.9
83.5
83
84.4
83.6
82.8
81.9
81.1
80.1
79.3
78.4
77.5
76.6
75.7
74.8
73.9
73
72
71.2
70.2
69.4
68.5
67.6
66.7
65.8
64.8
64
75.4
74.2
73.3
72
71
69.9
68.8
67.7
66.6
65.5
64.3
63.2
62
60.9
59.8
58.6
57.4
56.1
55
53.8
52.5
51.4
50.3
49
97
95
92
91
88
87
85
83
81
80
78
76
75
74
72
71
69
68
67
66
64
63
62
60
326
315
305
295
287
278
269
262
253
245
239
232
225
219
212
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
82.5
82
81.5
80.9
80.4
79.9
79.4
78.8
78.3
77.7
77.2
76.6
76.1
75.6
75
74.5
73.9
73.3
72.8
72.2
71.6
71
70.5
69.9
69.4
63.1
62.2
61.3
60.4
59.5
58.6
57.7
56.8
55.9
55
54.2
53.3
52.1
51.3
50.4
49.5
48.6
47.7
46.8
45.9
45
44
43.2
42.3
41.5
47.8
46.7
45.5
44.3
43.1
41.9
40.8
39.6
38.4
37.2
36.1
34.9
33.7
32.5
31.3
30.1
28.9
27.8
26.7
25.5
24.3
23.1
22
20.7
19.6
58
57
56
55
54
52
51
50
49
48
47
46
44
43
42
41
41
40
38
38
37
36
35
35
34
206
201
196
191
186
181
176
172
168
163
159
154
150
146
142
138
134
131
127
124
121
118
115
113
110
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
Lubrication
To help maintain a bearings antifriction
characteristics, lubrication is needed to:
Lubrication
The wide range of bearing types and operating conditions
precludes any simple, all-inclusive statement or guideline
allowing the selection of the proper lubricant. At the design
level, the first consideration is whether oil or grease is best for
the particular operation. The advantages of oil and grease are
outlined in the table below. When heat must be carried away from
the bearing, oil must be used. It is almost always preferred for
very high-speed applications. For speed ratings of grease and
oil-lubricated bearings, see pages 185-187.
Grease
Permits prelubrication of
sealed or shielded bearings
Oil Lubrication
Oils used for bearing lubrication should be high-quality mineral
oils or synthetic oils with similar properties. Selection of the
proper type of oils depends on bearing speed, load, operating
temperature and lubrication method. Some features and
advantages of oil lubrication, in addition to the above are:
192
Petroleum oils
Petroleum oils are made from a petroleum hydrocarbon derived
from crude oil, with additives to improve certain properties.
Petroleum oils are used for nearly all oil-lubricated applications
of bearings.
Viscosity
The selection of oil viscosity for any bearing application requires
consideration of several factors: load, speed, bearing setting,
type of oil and environmental factors. Since oil viscosity varies
inversely with temperature, a viscosity value must always be
stated with the temperature at which it was determined. Highviscosity oil is used for low-speed or high-ambient-temperature
applications. Low-viscosity oil is used for high-speed or lowambient-temperature applications.
There are several classifications of oils based on viscosity grades.
The most familiar are the Society of Automotive Engineers (SAE)
classifications for automotive engine and gear oils. The American
Society for Testing and Materials (ASTM) and the International
Organization for Standardization (ISO) have adopted standard
viscosity grades for industrial fluids. Fig. 145 shows the viscosity
comparisons of ISO/ASTM with SAE classification systems at
40 C (104 F).
Viscosity classification comparison
Synthetic oils
Synthetic oils cover a broad range of categories and include
polyalphaolefins, silicones, polyglycols and various esters. In
general, synthetic oils are less prone to oxidation and can operate
at extreme hot or cold temperatures. Physical properties, such as
pressure-viscosity coefficients, tend to vary between oil types;
use caution when making oil selections.
2000
1500
1500
1000
800
1000
600
680
400
460
300
320
200
150
100
80
60
40
30
85W min.
500
400
30
300
80W min.
20
200
10W min.
5W min.
SAE
Crankcase Oils
7
5
3
2
1000
700
40
32
10
90
50
46
10
8
2000
1500
68
15
3000
140
100
15
5000
4000
250 min.
150
20
7500
220
22
10000
150
70W min.
SAE
Gear Oil
100
75
60
50
40
35
33
ISO/ASTM
Viscosity Grade
193
20000
5000
200000
50000
10000
5000
1000
500
200
2000
1000
100
500
50
20
10
5.00
4.00
3.00
2.00
1.50
1.00
Viscosity Range
cSt (mm2/s) at
40 C (104 F)(1)
1500
1350-1650
1000
900-1100
680
612-748
460
414-506
320
288-352
220
198-242
150
135-165
100
90-110
68
61-75
46
41-51
32
29-35
22
20-24
(1)
Rounded off to the nearest
whole number
ISO VG
200
680
460
320
220
150
100
68
46
32
100
75
50
40
35
500000
100000
33
60
100
Additives
Viscosity index
80 min.
Pour point
Viscosity grades
100
150
140
180
220
260
300
210
Temperature Degrees Fahrenheit
Properties
Base stock
Additives
Viscosity index
80 min.
Pour point
Viscosity grades
194
Grease Lubrication
Grease lubrication is generally applicable to low-to-moderate
speed applications that have operating temperatures within
the limits of the grease. There is no universal anti-friction
bearing grease. Each grease has limiting properties and
characteristics.
Greases consist of a base oil, a thickening agent and additives.
Conventionally, bearing greases have consisted of petroleum
base oils thickened to the desired consistency by some form of
metallic soap. More recently synthetic base oils have been used
with organic and inorganic thickeners. Table 128 summarizes the
composition of typical lubricating greases.
TABLE 128. Composition of greases
Base Oil
Mineral oil
Synthetic
hydrocarbon
Thickening
+
Agents
+ Additives =
Lubricating
Grease
Rust inhibitors
Dyes
Tactifiers
Non-Soap (inorganic)
Metal deactivates
microgel (clay),
Perfluorinated oil
carbon black,
Oxidation inhibitors
silica-gel, PTFE
Silicone
Anti-wear EP
Non-Soap (organic)
Polyurea compounds
Esters
Typical
Dropping Point
Maximum
Temperature
Typical
Water Resistance
Lithium
soap
193
380
121
250
Good
Lithium
complex
260+
500+
149
300
Good
Aluminum
complex
249
480
149
300
Excellent
Calcium
sulfonate
299
570
177
350
Excellent
Polyurea
260
500
149
300
Good
Low temperatures
Starting torque in a grease-lubricated bearing at low temperatures
can be critical. Some greases may function adequately as long
as the bearing is operating, but resistance to initial movement
may be excessive. In certain smaller machines, starting may be
impossible when very cold. Under such operating circumstances,
greases containing low-temperature characteristic oils are
generally required.
If the operating temperature range is wide, synthetic greases
offer advantages. Synthetic greases are available to provide very
low starting and running torque at temperatures as low as -73
C (-100 F). In certain instances, these greases perform better in
this respect than oil.
An important point concerning lubricating greases is that the
starting torque is not necessarily a function of the consistency
or the channel properties of the grease. Starting torque is more
a function of the individual rheological properties of a particular
grease and is best evaluated by application experience.
High temperatures
The high temperature limit for lubricating greases is generally
a function of the thermal and oxidation stability of the fluid and
the effectiveness of the oxidation inhibitors. Grease temperature
ranges are defined by both the dropping point of the grease
thickener and composition of the base oil. Table 130 shows
the temperature ranges of various base oils used in grease
formulations.
A rule of thumb, developed from years of testing greaselubricated bearings, indicates that grease life is halved for every
10 C (50 F) increase in temperature. For example, if a particular
grease provides 2000 hours of life at 90 C (194 F), by raising the
temperature to 100 C (212 F), reduction in life to approximately
1000 hours would result. On the other hand, 4000 hours could be
expected by lowering the temperature to 80 C (176 F).
195
Ester
Synthetic
hydrocarbon
Silicone
Perfluoroalkyl
polyether
Temperature range
Contamination
Abrasive Particles
When roller bearings operate in a clean environment, the primary
cause of damage is the eventual fatigue of the surfaces where
rolling contact occurs. However, when particle contamination
enters the bearing system, it is likely to cause damage such as
bruising, which can shorten bearing life.
When dirt from the environment or metallic wear debris from
some component in the application are allowed to contaminate
the lubricant, wear can become the predominant cause of
bearing damage. If bearing wear becomes significant, changes
will occur to critical bearing dimensions that could adversely
affect machine operation.
Bearings operating in a contaminated lubricant exhibit a higher
initial rate of wear than those running in an uncontaminated
lubricant. With no further contaminant ingress, this wear rate
quickly diminishes. The contamination particles are reduced
in size as they pass through the bearing contact area during
normal operation.
196
Petroleum
Water
Grease selection
The successful use of bearing grease depends on the physical
and chemical properties of the lubricant as well as application
and environmental conditions. Because the choice of grease
for a particular bearing under certain service conditions is often
difficult to make, you should consult with your lubricant supplier
or equipment maker for specific questions about lubrication
requirements for your application. You also can contact your
Timken engineer for general lubrication guidelines for any
application.
Grease must be carefully selected with regard to its consistency
at operating temperature. It should not exhibit thickening,
separation of oil, acid formation or hardening to any marked
degree. It should be smooth, non-fibrous and entirely free from
chemically active ingredients. Its dropping point should be
considerably higher than the operating temperature.
APPLICATION
Timken Premium
All-Purpose Industrial Grease
Timken
Food Safe Grease
Timken
Synthetic Industrial Grease
Moderate Speeds
Light to Moderate Loads
Moderate Temperatures
Moderate Water
Timken
Multi-Use Lithium Grease
This selection guide is not intended to replace the specifications by the equipment builder, who is responsible for its performance.
Quiet running.
Space and/or vacuum.
Electrical conductivity.
For assistance with these or other areas requiring special lubricants, consult your
Timken engineer.
TIMKEN ENGINEERING MANUAL
197
198
Prelubricated bearings
Prelubricated shielded and sealed bearings are successfully
used in applications where:
Penetration Number
355-385
310-340
265-295
220-250
175-205
130-160
85-115
to satisfactory use.
Grease Type
Grease Temperature
Range
Radial bearings
(Double shielded and single
and double sealed)
Polyurea thickener
Petroleum oil
-34 C to +135 C
(-30 F to +275 F)
Polyurea thickener
Petroleum oil
-34 C to +135 C
(-30 F to +275 F)
Synthetic thickener
Synthetic
hydrocarbon fluid
-54 C to +163 C
(-65 F to +325 F)
Consistency
Greases may vary in consistency from semi-fluids that are hardly
thicker than a viscous oil to solid grades almost as hard as a
soft wood.
Consistency is measured by a penetrometer in which a standard
weighted cone is dropped into the grease. The distance the cone
penetrates (measured in tenths of a millimeter in a specific time)
is the penetration number.
199
Aluminum Complex
Timken Food Safe
Barium Complex
Calcium Stearate
Calcium 12 Hydroxy
Calcium Complex
Calcium Sulfonate
Timken Premium Mill
Timken Heavy-Duty Moly
Clay Non-Soap
Lithium Stearate
Lithium 12 Hydroxy
Lithium Complex
Polyurea Conventional
Polyurea Shear Stable
Timken Multi-Use
Timken All -Purpose
Timken Synthetic
Timken Pillow Block
Note
Mixing greases can result
in improper bearing lubrication.
Warning
Always follow the specific lubrication instructions of your equipment supplier.
Mixing greases can result in improper
bearing lubrication. Always follow the
specific lubrication instructions of your
equipment supplier.
200
Polyurea S S
Polyurea
Li Complex
Li 12 Hydroxy
Li Stearate
Clay Non-Soap
Ca Sulfonate
= Incompatible
Ca Stearate
= Borderline
Ba Complex
= Compatible
Al Complex
= Best Choice
Ca Complex
Seals
Selecting the right seal
When selecting the proper seal design for any Timken bearing
application, it is necessary to consider the type of lubricant, the
operation environment, the speed of the application and general
operating conditions.
Shaft finish
It is important to ensure that no spiral grooves result from
machining the shaft surfaces since these will tend to draw
lubricant out of, or contaminant into, the bearing cavity. Plunge
grinding normally produces a satisfactory surface finish.
Non-contacting seals
Machined flingers
Machined parts, along with other closure elements, can be used
in place of stampings when closer clearances are desired. This
results in a more efficient retention of lubricant and exclusion of
foreign matter from the bearing housing. Examples are shown in
fig. 151 and fig. 152.
An umbrella-shaped flinger is shown in fig. 152 combined with
an annular groove closure. This combination effectively retains
oil and keeps out dirt at high shaft speeds.
Metal stampings
Metal stamping closures are effective in clean applications.
When environmental conditions are dirty, stampings are used in
combination with other closure elements to provide an effective
labyrinth against the entry of foreign matter into the bearing
chamber.
201
contacting seals
Annular grooves
Many types and styles of radial lip seals are commercially available
to satisfy different sealing requirements. In clean environments,
where the primary requirement is the retention of lubricant in the
bearing housing, a single lip seal with the lip pointing inward is
often used. When the critical concern is excluding contaminants,
the lip is usually pointed outward (fig. 154).
70
a c
a
c
c
b
70 70
70
b
b
Clearance
Clearance
Clearance
Clearance
mm
in.
Dimension a
3.20 - 4.80
0.125 - 0.190
Dimension b
4.00 - 4.80
0.160 - 0.190
Dimension c
0.5a
Diametral clearance
0.25 - 0.40
0.010 - 0.016
1.3 max.
0.05 max.
Fig. 155. Lip seal plus machined labyrinth.
202
The DUO FACE-PLUS seal (fig. 156) has double lips that seal in the
housing bore and the ground surface of the outer ring front face.
This eliminates the need to machine a special seal surface. The
DUO FACE-PLUS seal has proven successful in many different
types of grease-lubricated applications.
Diaphragm seals
Diaphragm seals (fig. 157) are commercially available. The
metallic lip is designed to be spring-loaded against the narrow
face of the outer ring. The type shown in fig. 158 has a second
lip that seals against the housing.
Fig. 159. Mechanical face seal for low speeds and contaminated
environments.
V-ring seals
V-ring seals can be used in conjunction with grease or oil
lubrication. As rotational speeds increase, the lip tends to pull
away from the sealing surface and acts like a flinger. This seal
may be used with either oil or grease lubrication (fig. 160). Consult
your V-ring seal supplier for application restrictions.
203
204
Suffix PP
P type
PP type
205
Tri-Ply Seals
Tri-Ply Shroud Seal ball bearings are designed for bearing
applications involving exceptionally severe contamination or
abrasion environments. They are produced in many types and
sizes, both in the radial and wide inner ring designs.
Each Tri-Ply seal consists of a triple-lip nitrile seal molded to a
heavy metal shroud cap. All three seal lips have heavy flareout contact with the inner ring outside diameter and provide
exceptionally effective protection against lubricant loss and wet
or abrasive contaminants entry. The shroud cap, which nests
closely with the outside seal lip, helps protect the rubber seal
members from abrasive damage.
A feature of these bearings is the balanced design, consisting
of deep raceways, large ball size, and extra-wide or heavy inner
rings. The use of Tri-Ply bearings simplifies housing designs,
and their extra inner ring width provides greater support on the
shaft. These bearings are widely used on conveyors and farm
machinery such as disc harrows, hillers, tomato harvesters and
cotton harvesters.
206
NOTES
207
NOTES
208
www.timken.com
Price: USD $75
TIMKEN
Overview
FRICTION MANAGEMENT
SOLUTIONS A TOTAL SYSTEMs
APPROACH
Your industry is ever-changing, from the evolution of advanced
motion-control systems to the demands from your customers.
Turn to us to stay ahead of the curve.
We use our friction-management know-how to offer solutions
that maximize performance, fuel-efficiency and equipment
life. We also offer integrated services that extend well
beyond bearings, including condition monitoring systems and
services, encoders and sensors, seals, premium lubricants and
lubricators.
Timkens wide range of friction management solutions can
include evaluations of your entire system not just individual
components. This provides cost-effective solutions to help you
reach specific application goals. Working together, we help
you meet these demands and ensure all your systems
run smoothly.
TIMKEN
Overview
specialists from across the globe who are experts in mechanical power transmission, antifriction bearing design,
tribology, metallurgy, clean steel production, precision
manufacturing, metrology, and engineered surfaces and
coatings.
TIMKEN
Overview
QUALITY SOLUTIONS
As the only premium bearing manufacturer to also make superclean, high-alloy bearing steels, we understand the critical
quality link between materials and product performance.
We also strictly adhere to the Timken Quality Management
System in every plant worldwide, so each bearing product
meets the same high performance standards no matter
where in the world it is manufactured.
TIMKEN
Overview
Catalog FEATURES
Dimensional and load rating data, within the various types and
styles of bearings, is organized by size.
ISO and ANSI/ABMA, as used in this publication, refer to
the International Organization for Standardization and the
American National Standards Institute/American Bearing
Manufacturers Association.
Note
Product performance is affected by many factors beyond the control
of Timken. Therefore, the suitability and feasibility of all designs and
product selection should be validated by you. This catalog is provided
solely to give you, a customer of Timken or its parent or affiliates,
analysis tools and data to assist you in your design. No warranty,
expressed or implied, including any warranty of fitness for a particular
purpose, is made by Timken. Timken products and services are sold
subject to a Limited Warranty.
You can see your Timken engineer for more information.
TIMKEN
Overview
STORAGE
contaminants such as, but not limited to, dust, dirt, harmful
vapors, etc.
TIMKEN
Overview
Most bearing
types are typically
shipped protected
with a corrosionpreventive compound
that is not a lubricant.
Such bearings may be
used in oil-lubricated
applications without
removal of the corrosionpreventive compound. When
using some specialized grease
lubrications, it is advisable to remove
the corrosion-preventive compound before
packing the bearings with suitable grease.
Some bearing types in this catalog are pre-packed with
general purpose grease suitable for their normal application.
Frequent replenishment of the grease may be necessary for
optimum performance. Care must be exercised in lubricant
selection, however, since different lubricants are often
incompatible.
When specified by the customer, other bearings may be
ordered pre-lubricated.
Upon receipt of a bearing shipment, ensure that the bearings
are not removed from their packaging until they are ready
for mounting so that they do not become corroded or
contaminated. Bearings should be stored in an appropriate
atmosphere in order that they remain protected for the
intended period.
Warning
INTRODUCTION
INTRODUCTION
Timken is a leader in the advancement of bearing
technology. Expert craftsmanship, well-equipped
production facilities, and a continuing investment in
Where more complex bearing applications are
Bearing Types
Tapered Roller
Bearing
Thrust Tapered
Roller Bearing
Good
Unsuitable
Excellent
Unsuitable
Spherical Roller
Bearing
Thrust Spherical
Roller Bearing
Radial
Ball Bearing
Thrust Ball
Bearing
Angular Contact
Ball Bearing
Good
Unsuitable
Good
Poor
Fair
Good
Excellent
Unsuitable
Good
Fair
Excellent
Fair
Excellent
Good
Combined load
Excellent
Poor
Fair
Unsuitable
Good
Fair
Good
Poor
Excellent
Moment load
Excellent
Poor
Unsuitable
Unsuitable
Unsuitable
Unsuitable
Fair
Poor
Good
High stiffness
Excellent
Excellent
Good
Excellent
Good
Good
Fair
Good
Good
Low friction
Good
Good
Excellent
Poor
Fair
Fair
Excellent
Good
Good
Misalignment
Poor
Poor
Poor
Unsuitable
Excellent
Excellent
Good
Poor
Poor
Locating position
(fixed)
Excellent
Good
Fair
Fair
Good
Good
Good
Excellent
Good
Non-locating
position (floating)
Good
Unsuitable
Excellent
Unsuitable
Good
Unsuitable
Good
Unsuitable
Good
Speed
Good
Good
Excellent
Poor
Fair
Fair
Excellent
Excellent
Excellent
10
Suffix K
Conrad
Suffix W
Filling Slot
Fixed mounting
Floating mounting
11
Double-Row
Fixed mounting
Floating mounting
Fig. 4. Typical mountings for double-row, angular contact ball
bearings.
Fig. 3. Typical mounting for single-row, angular contact ball
bearings.
12
Precision Bearings
(1)
(1)For additional information, refer to the Timken Super Precision Bearings for
Machine Tool Applications Catalog (order no. 5918) on www.timken.com.
13
14
TXR
Fig. 11. TXR crossed roller
bearing.
Multiple internal geometries are available to optimize either loadcarrying capacity or speed capability with part number suffixes
designated as: WI, WN, HX or K. WI-type bearings are designed to
maximize capacity of the various bearing cross sections and are
used in low to moderate speeds. The HX is Timkens proven highspeed design. It has a significant advantage at higher speeds,
generating less heat and less centrifugal loading forces. The
WN-type is generally a compromise between the WI and HX as
it offers higher speed capability than the WI, but lower capacity,
higher stiffness and lower speed capability than the HX design.
Most of the bearing types are available in either 15 degree
(2MM) or 25 degree (3MM) contact angles. In addition, Timken
now stocks more ceramic ball sizes than ever for the highest
speed requirements. The K-type deep-groove (Conrad) super
precision radial ball bearing is generally used in applications
where capacity and stiffness do not require sets containing
multiple bearings. By virtue of the single-row, radial deep-groove
construction, and super precision level tolerances, these are
capable of carrying thrust loads in either direction. Also, they
RA-RR series
extended inner ring
with locking collar
Easiest of all to install, wide inner ring ball bearings with selflocking collars are available in various sizes. These bearings,
shown with various seal and inner ring width variations, serve
many purposes in farm and industrial applications.
The GYA-RRB and the GY-KRRB series are extended inner ring and
wide inner ring type bearings with specially designed setscrews
to lock on the shaft. These bearings can be purchased so that
they can be relubricated. Positive contact land-riding R-Seals
provide protection against harmful contaminants and retain
lubricant. Extended inner ring bearings are used when space is
at a premium and overturning loads are not a problem. The wide
inner ring setscrew series is available when additional surface
contact on the shaft is a requirement for added stability.
Concentric Collar
Using the concentric collar, the bearing is locked to the shaft by
two setscrews, 120 degrees apart, tightened in the collar and
passing through drilled holes in the inner ring. These units are
suited for applications where space is limited and reversing shaft
rotation is encountered.
15
Double-Row Bearings
TS - Single-row
TSF - Single-row,
with flanged outer ring
The TSF type is a variation on the basic
single-row bearing. TSF bearings have
a flanged outer ring to facilitate axial
location and accurately aligned seats in
a through-bored housing.
TDI
TDIT
16
TNA
- Non-adjustable
TNASW - Non-adjustable with lubricant slots
TNASWE - Non-adjustable with lubricant
slots and extended back face rib
These three bearing types are similar to the TDO with a one-piece
(double) outer ring and two single inner rings. The inner ring
front faces are extended so they abut, eliminating the need for a
separate inner-ring spacer. Supplied with a built-in clearance to
give a standard setting range, these bearings provide a solution
for many fixed or floating bearing applications where optimum
simplicity of assembly is required.
Types TNASW and TNASWE are variations having chamfers
and slots on the front face of the inner ring to provide lubrication
through the shaft. Type TNASWE have extended back face ribs
on the inner rings which are ground on the O.D. to allow for the
use of a seal or stamped closure. These designs are typically
used on stationary shaft applications.
Spacer assemblies
Any two single-row bearings (type TS) can be supplied as
a double-row, pre-set, ready-to-fit assembly by the addition
of spacers, machined to pre-determined dimensions and
tolerances.
Spacer assemblies are provided in two types: "2S" and "SR". This
concept can be applied to produce custom-made double-row
bearings to suit specific applications. In addition to providing
a bearing that automatically gives a pre-determined setting at
assembly without the need for a manual setting, it is possible
to modify the assembly width to suit an application, simply by
varying the spacer widths.
SR
2S
Fig. 21. Spacer assemblies.
TNA
TNASW
TNASWE
SR - Set-RightTM assembly
Type SR are made to a standard setting range, based on Timkens
Set-Right automated setting technique suitable for most
industrial applications. They have two spacers and an optional
snap-ring that may be used for axial location. Because both types
are made up of popular sizes of single-row bearings, they provide
a low-cost option for many applications.
17
2TS-IM
18
2TS-DM
Fig. 22. Basic spacer assemblies.
2TS-TM
PACKAGED BEARINGS
PINION PACTM
UNIPACTM
UNIPAC-PLUSTM
APTM
SPTM
APTM bearing
UNIPACTM bearing
The UNIPAC-PLUS bearing is a ready-to-install, pre-set,
pre-lubricated and sealed double-row assembly with a flanged
outer ring. Originally designed for the high-volume needs of
passenger car wheels, the UNIPAC bearing now has wider
application in wheel hubs of heavy vehicles as well as in industrial
equipment.
SPTM bearing
Similar in concept to AP bearings, the SP bearing is designed
for rail journal bearing applications. The SP bearing type differs
from the AP bearing in that SP bearings are more compact in size
and are manufactured to metric boundary dimensions.
UNIPAC-PLUSTM bearing
The UNIPAC-PLUS bearing is a ready-to-install, pre-set,
sealed double-row assembly with a flanged outer ring. It also is
lubricated for the reasonable life of the bearing. It is designed
for wheel applications subjected to moderate to heavy loading.
The UNIPAC-PLUS bearing provides advantages of improved
reliability, reduced weight and easier assembly.
19
High-Speed BEARINGS
TSMA - Single-row with axial oil
TSMR - Single-row with radial oil
Some applications require extreme high-speed capability where
special lubrication methods must be provided.
The TSMA and TSMR are single-row
bearings with provisions for lubrication of
critical roller-rib contact area to ensure
adequate lubrication at high speeds.
The TSMA concept works by capturing
oil in a manifold (attached to the inner
ring), which is then directed to the
rib-roller contact through holes drilled
axially through the large inner ring rib.
The TSMR functions in a similar manner
with the difference being that holes are
drilled radially from the inner ring bore
to the large rib face. Oil is captured in
a circumferential groove in the inner
ring bore. It is directed to the rib-roller
contact area through radial holes.
20
TDIE
TDIA
TNASWH
TNASWHF
Four-row bearings
Four-row bearings combine the inherent high-load, radial/thrust
capacity and direct/indirect mounting variations of tapered roller
bearings into assemblies of maximum load rating in a minimum
space. Their main application is on the roll necks of rolling mill
equipment.
All four-row bearings are supplied as pre-set matched assemblies,
with all components numbered to ensure correct installation
sequence.
Type TQITS
Type TQITSE
The main feature of these bearings is a tapered bore the taper
being matched and continuous through the inner rings. This
permits an interference fit on the backup rolls of high-speed mills,
where a loose inner ring fit of a straight bore type TQO bearing
could result in excessive neck wear.
These four-row bearings consist of two pairs of indirectly
mounted bearings: two single and one double inner ring, four
single outer rings and three outer-ring spacers. The adjacent
faces of the inner-rings are extended so that they abut,
eliminating the need for inner-ring spacers. The indirect mounting
of the bearing pairs increase the overall effective spread of the
bearing, to give optimum stability and roll rigidity.
Type TQITSE is the same as TQITS, but has an extension to the
large bore inner ring adjacent to the roll body. This not only
provides a hardened, concentric and smooth surface for radial
lip seals, but also improves roll neck rigidity by eliminating a fillet
ring. This allows the centerline of the bearing to move closer to
the roll body. It also permits shorter and less costly rolls.
TQO/ TQOW
TQITS
TQITSE
SEALED BEARINGS
TSL
Timken offers a wide range of sealed
bearings such as the DUO-FACE PLUS seal
shown in fig 29. The TSL incorporates a DUOFACE PLUS seal, making it an economical
choice for grease-lubricated applications
at moderate speeds. See the seals section
in the back of this manual for additional seal
designs.
21
Thrust Bearings
Standard types of thrust bearings manufactured by Timken are
included in this section. Each type is designed to take thrust
loads, but four types (TVL, DTVL, TTHD and TSR) accommodate
radial loads as well. All types reflect advanced design concepts,
with large rolling elements for maximum capacity. In roller thrust
bearings, controlled-contour rollers are used to ensure uniform,
full-length contact between rollers and raceways with resultant
high capacity. Thrust bearings should operate under continuous
load for satisfactory performance.
Type TVB
Type TVL
Type DTVL
Type TP
Type TPS
Type TTHD
Type TSR
Type TTSP
Usually the inner ring is the rotating member and is shaft mounted.
The outer ring is normally stationary and should be mounted with
O.D. clearance to allow the bearing to assume its proper operating
position. If combined loads exist, the outer ring must be radially
located in the housing.
Thrust ball bearings are used for lighter loads and higher speeds
than thrust roller bearings. Types TVB, TVL and DTVL are shown
in fig. 30.
Type TVB thrust ball bearing is separable and consists of two
hardened and ground steel rings with grooved raceways, and
a cage that separates and retains precision-ground and lapped
balls. The standard cage material is brass, but this may be varied
according to the requirements of the application. Timken standard
tolerances for type TVB bearings are equivalent to ABEC 1 where
applicable, but higher grades of precision are available.
Type TVB bearings provide axial rigidity in one direction and their
use to support radial loads is not suggested. Usually the rotating
TVB
Fig. 30. Thrust ball bearing types.
22
TVL
DTVL
Type TSR
TP
TPS
Fig. 31. Thrust cylindrical roller bearings.
Type TPS bearings are the same as type TP bearings except one
ring is spherically ground to seat against an aligning ring, thus
making the bearing adaptable to initial misalignment. Its use
is not suggested for operating conditions where alignment is
continuously changing (dynamic misalignment).
23
Type TTHDFL
Type TTHDSX
TTC
TTSP
Type TTVS
Type TTHDSV
TTHDFL
TTVS
TTHDFL
Most sizes utilize cages with hardened pins through the center
of the rollers, allowing closer spacing of the rollers to maximize
capacity. Smaller sizes have cast-brass cages, carefully
machined to permit full flow of lubricant.
Self-aligning V-flat bearings (TTVS) employ the same basic roller
and raceway design, except the lower ring is in two pieces, with
the contacting faces spherically ground permitting self-alignment
under conditions of initial misalignment. TTVS bearings should
not be used if dynamic misalignment (changing under load) is
expected.
24
TTHDSV
Fig. 34. Thrust tapered roller bearings.
TTHDSX
EJ
EM/YM and
EMB/YMB
YMD
YP
C4 clearance range.
A taper of 1:12 is standard except for 240, 241 and 242 series,
which have a taper of 1:30.
SERIES
239
SERIES
SERIES
SERIES
SERIES
239
239 239
239230
230
230 230
230 240
240
240 240
240
231
231
231 231
231
241
241
241 241
241
222
222
222 222
222
232 232
232
232
232
213 213
213
213
213
223
223
223 223
223
233
233
233 233
233
25
NU, RIU, RU
N, RIN, RN
26
NJ, RIJ, RJ
NF, RIF, RF
NUP, RIT, RT
NP, RIP, RP
EMA Series
Full-Complement (NCF)
The full-complement (NCF) single-row bearings include integral
flanges on the inner and outer rings. These bearings also can
manage axial loads in one direction and permit small axial
displacements.
A-52xx-WS
A-52xx-WM
52xx-WS
A-52xx
27
CAGES
Cages (also referred to as rolling element retainers) serve several
purposes in the proper operation of a rolling element bearing.
Cages separate the rolling elements and prevent rolling element
on rolling element contact and wear. Cages align the rolling
elements on the inner ring to prevent rolling element sliding,
skidding, and skewing to facilitate true rolling motion. For handling
purposes, cages retain the rolling elements on the inner ring
assembly to allow for bearing installation. In some instances,
cages also improve flow of the lubricant to the bearing raceway
or rib contacting surfaces.
The following sections discuss the common types of cages
used for each major bearing design type (tapered, cylindrical,
spherical, and ball bearing). The basic design geometry, material,
and manufacture are discussed for each cage type.
Polymer Cages
Cages for tapered roller bearings made of polymer material are
used primarily for pre-greased and sealed package designs. The
most common polymer materials used are Nylon thermoplastics
with glass reinforcement. Polymer cages can be mass produced
in large quantities and offer more design flexibility than stampedsteel types. Polymer cages are lightweight and easy to assemble.
In some instances, increased bearing rating can be achieved
by allowing one or two extra rollers in the bearing complement.
Care should be exercised when using aggressive lubricants with
EP (extreme-pressure) additives in combination with elevated
temperatures greater than 107 C (225 F).
Machined Cages
Machined cages for tapered roller bearings are robust in design
and are suited for high-speed and high-load applications.
Machined cages use alloy steels and are produced through
milling and broaching operations. Assembly does not require
a close-in operation and rollers can be retained using nibs or
staking. Oil holes also can be easily added for extra lubrication
for demanding applications. Some designs are silver plated for
special applications.
Pin-Type Cages
28
Machined-Brass Cage
EM, EMB, YM, YMB and YMD bearing cages are precisionmachined from brass as shown in figs. 44-46. Their rugged
construction provides an advantage in more severe applications.
The open-end, finger-type design permits lubricant to reach all
surfaces easily, ensuring ample lubrication and a cooler running
bearing.
EM/YM
EM
EM
YMD
YMB
YMB
YMD
YMD
EJ
EJ
EM
EJ
EM
EJ
Fig. 41. EJ cage.
Pin-Type Cages
Large diameter spherical roller bearings can be supplied with
these cages. Pin-type cages, one for each row of rollers, consist
of two rings and a series of pins running through the center of
the rolling element. The design of pin-type cages permits an
increased roller complement, giving the bearing enhanced loadcarrying ability. Consult your Timken engineer for suggestions on
the application of this cage.
YMB
YMD
EMB/YMB
YMD
YMB
EM, EMB, YM and YMB are all one-piece designs that are
YMD within the bearing. With
YMB
differentiated
by their means of guidance
EM and YM designs, the cage mass is low and the rollers are used
for guidance, while EMB and YMB cage designs typically have
more mass and guide on the inner ring.
YP
29
YP
YP
Pin-Type Cages
Machined Cages
Machined cages are an option for smaller cylindrical bearing
sizes, and are typically made from brass. Machined cage designs
for cylindrical roller bearings offer increased strength for more
demanding applications.
Designs can be one-piece or two-piece cages. One-piece designs
can be either a finger-type as shown in fig. 49 or a standard cage
configuration having fully milled pockets. The one-piece fingertype and the two-piece design with cage ring (fig. 50) are more
common in standard cylindrical roller bearings. They also are
roller-guided designs.
The one-piece version with fully milled roller pockets (fig. 51)
is our premium cage. This cage is used with our EMA series
bearings. Unlike traditional roller-riding cages, it is a land-riding
cage which minimizes drag on the roller elements. This reduces
heat generation, resulting in improved bearing life. Compared to
a two-piece design, this one-piece cage also reduces heat and
wear by enhancing lubrication flow.
30
Cages of this type are a one-piece design and are usually ring
piloted. The cage is light weight, has oil-absorbing capability, and
is suitable for high-speed applications. Cages of this type can be
precisely machined, which reduces inertial ball and cage impact
forces at high speeds. It does not provide for retention of the balls
for handling purposes.
Care also needs to be exercised when using aggressive lubrications with extreme-pressure (EP) additives in combination with
elevated temperatures greater than 107 C (225 F).
Care also needs to be exercised when using aggressive lubrications with extreme-pressure (EP) additives in combination with
elevated temperatures greater than 107 C (225 F).
31
Description
mm, in.
unitless
unitless
a3
unitless
unitless
unitless
unitless
Symbol
Description
mm, in.
mm, in.
mm, in.
DpG
mm, in.
DpP
mm, in.
DpW
mm, in.
e Life Exponent
unitless
unitless
unitless
mm, in.
E Free Endplay
mm, in.
A, B,
unitless
mm, in.
unitless
mm, in.
unitless
mm, in.
fb
mm, in.
fn
Speed Factor
Tooth Length
Ca90
N, lbf
unitless
unitless
unitless
N, lbf
N, lbf
Co
N, lbf
Coa
N, lbf
C90
C90(2)
Ca
unitless
unitless
unitless
Cs
unitless
unitless
unitless
Cp
Ct
mm, in.
Ball Diameter
mm, in.
d1
Spherical Diameter
mm, in.
da
mm, in.
mm, in.
mm, in.
mm, in.
dsi
mm, in.
mm, in.
D0
mm, in.
FaG
N, lbf
FaP
N, lbf
FaW
N, lbf
N, lbf
N, lbf
Fc Centrifugal Force
N, lbf
N, lbf
Frh
N, lbf
Frs
N, lbf
N, lbf
Fs
N, lbf
FsG
N, lbf
FsP
N, lbf
FsW
N, lbf
Ft Tangential Force
N, lbf
Fte
N, lbf
FtG
N, lbf
FtP
N, lbf
FtW
N, lbf
FW Force of Unbalance
N, lbf
mm, in.
unitless
unitless
mm, in.
unitless
Dm
mm, in.
Power
32
kW, hp
mm, in.
Symbol
Description
HFs
unitless
unitless
lbf/RPM2
unitless
unitless
K1, K2
unitless
decimal fraction
Kia
mm, in.
Kn
unitless
unitless
mm, in.
mm, in.
revolutions or hours
Lf Life Factor
unitless
m Gearing Ratio
unitless
rot/min, RPM
n a
rot/min, RPM
Reference Speed
rot/min, RPM
nP
rot/min, RPM
rot/min, RPM
unitless
unitless
unitless
unitless
unitless
Nf
Speed Factor
unitless
unitless
Po
N, lbf
Poa
N, lbf
Por
N, lbf
N, lbf
N, lbf
N, lbf
Shaft Diameter
mm, in.
unitless
Sd
mm, in.
SD
mm, in.
Sea
mm, in.
Sia
mm, in.
mm, in.
mm, in.
unitless
N, lbf
Te
N, lbf
mm, in.
decimal fraction
unitless
Ko
Bearing Life
Description
Kea
L10
Symbol
RIC
unitless
km/h, mph
VBS
mm, in.
VCS
mm, in.
m/s, fpm
unitless
unitless
X0
unitless
unitless
Y0
unitless
unitless
mm/mm/C, in./in./F
ao
deg.
deg.
C, F
Bs
mm, in.
Cs
mm, in.
dmp
mm, in.
Dmp
mm, in.
mm, in.
q1, q2, q3 Gear Mesh Angles Relative to the Reference Plane deg., rad
qi, qo
C, F
deg.
unitless
cP
cSt
deg.
r Lubricant Density
deg.
deg.
deg.
kg/m3, lb./ft3
deg.
deg.
deg.
deg.
unitless
33
GEARING
The following equations are used to determine the forces
developed by machine elements commonly encountered in
bearing applications.
Spur gearing
Tangential force
(1.91 x 107) H (metric system)
FtG =
DpG nG
Separating force
FsG = FtG tan G
Pinion
Tangential force
(1.91 x 107) H (metric system)
FtP =
DmP np
(1.26 x 105) H (inch system)
=
DmP np
Thrust force
FaG = FtG tan G
Thrust force
FaP = FtP tan P sin P
Fig. 58. Helical gearing.
Separating force
FtG tan G
FsG =
cos G
34
Separating force
FsP = FtP tan P cos P
(metric system)
Thrust force
Separating force
FsG = FtG tan G cos G
FtP = FtG
In hypoid gearing:
FtG cos P
FtP =
cos G
Hypoid pinion effective working diameter:
DmP = DmG
( )( )
Np
NG
cos G
cos P
Tangential force
(1.91 x 107) H
FtG =
DmG nG
(metric system)
35
Thrust Force
Driving member
FaP = FtP (tan P sin P sin P cos P)
cos P
Driving member
FsP = FtP (tan P cos P + sin P sin P)
cos P
Driven member
F
tG
FaG =
(tan G sin G + sin G cos G)
cos G
Driven member
F
(tan cos sin sin )
tG
FsG =
G
G
G
G
cos G
Driving member
Right-hand spiral
counterclockwise
or
Left-hand spiral
clockwise
Separating Force
Driven member
Driving member
Driven member
36
Worm Gear
Tangential force
Worm
(1.91 x 107) H
(metric system)
FtG =
DpG nG
(1.26 x 105) H
(inch system)
=
DpG nG
FtW
FtG =
tan
Thrust force
FaW = 0.98 FtG
Thrust force
(1.91 x 107) H
FaG =
DpW nW
(metric system)
(1.26 x 105) H
=
DpW nW
(inch system)
(
(
)
)
DpG
= tan-1
m DpW
or
LH
= tan-1
DpW
and
(inch system)
Separating force
0.98 FtG tan
FsW =
cos
Tangential force
FtW sin
FsG =
cos sin + cos
(metric system)
Worm Gear
Separating force
(1.91 x 107) H
FtW =
DmW nW
(1.26 x 105) H
=
DmW nW
or
Where:
Tangential force
(1.91 x 107) H m
or
cos tan
=
cos + cot
Thrust force
Metric system
(1.91 x 107) H
FaG =
DmW nW
0.146
(1) = (5.34 x 10 -7) Vr3 +
- 0.103
Vr0.09
DpW nW
Vr =
(1.91 x 104) cos
Separating force
Inch system
0.235
(1) = (7 x 10 -14) Vr3 +
- 0.103
Vr0.09
DpW nW
Vr =
3.82 cos
(1) Approximate coefficient of friction for the 0.015 to 15 m/s (3 to 3000 ft/min)
(metric system)
Where:
DpG
LH
= tan-1
= tan-1
m DpW
DpW
37
Shock Loads
(1.91 x 107) H
Fb =
Dm n
5
= (1.26 x 10 ) H
Dm n
B (inch system)
(metric system)
P
Dm =
180
sin
Ns
( )
Where:
P = chain pitch
Centrifugal Force
k side
ion, slac
Dm
F2 = Tens
Fb
F1 = Tens
Fw r n2
=
3.52 x 104
ion, tigh
t side
(metric system)
(inch system)
1.00
1.25
V belts.............................................
1.50
Fte V
3600
Fte V
= 336V
Dm
375
and
38
5300V
Dm
Bearing REACTIONS
For a shaft on two supports, bearing radial loads are determined
by:
the bearing supports, and solving for the radial and axial
reactions at each support.
Effective Spread
Tapered Roller or Angular Contact
Ball Bearings
When a load is applied to a tapered roller or angular contact
ball bearing, the internal forces at each rolling element-to-outer
raceway contact act normal to the raceway. These forces
have radial and axial components. With the exception of the
special case of pure axial loads, the inner ring and the shaft
will experience moments imposed by the asymmetrical axial
components of the forces on the rolling elements. The effective
center for tapered roller bearings is defined as the point at which
the lines of force normal to the outer ring raceway intersect the
bearing axis. As an approximation, it also applies to angular
contact ball bearings. The effective spread is then defined as the
distance between the bearing effective centers for a two-bearing
system. It can be demonstrated mathematically that, if the shaft is
modeled as being supported at its effective bearing center rather
than at its geometric bearing center, the bearing moment may be
ignored when calculating radial loads on the bearing.
Only externally applied loads need to be considered, and moments
are taken about the effective centers of the bearings to determine
loads or reactions.
Effective bearing
Effective bearing
spread
spread
Effective bearing
Effective bearing
spread
spread
Effective bearing
Effective bearing
spread
spread
Effective bearing
Effective bearing
spread
spread
Float position
Fixed position
Effective bearing
Effective bearing
spread
spread
Effective bearing
Effective bearing
spread
spread
Effective bearing
Effective bearing
spread
spread
Effective bearing
Effective bearing
spread
spread
39
Force Resolution
Shafts on Two Supports
Simple beam equations are used to translate the externally
applied forces on a shaft into bearing reactions acting at the
bearing effective centers.
The following equations are for the case of a shaft on two
supports with gear forces Ft (tangential), Fs (separating), and Fa
(thrust), an external radial load F, and an external moment Mo.
The loads are applied at arbitrary angles (1, 2, and 3) relative
to the reference plane indicated in fig. 67. Using the principle of
superposition, the equations for vertical and horizontal reactions
(Frv and Frh) can be expanded to include any number of gears,
external forces or moments. For the bearing reaction calculations,
the gear forces should include the sign (+/-) generated from the
respective gear force equation.
FsG
FsG
FtG
FaG
2
1
3
e
lan
of
nt
me
Mo
FaG
FtG
Plane of
Reference
Bearing A
Mo Bearing B
FrAh
FrBh
FrBv
FrAv
c1
c2
ae
40
Pr = XFr + YFa
KT = Fa
KT = Fa
Bearing
Description (ref.)
In equation form,
Pr = Fr + YFa
for Fa / Fr e, and
Pr = 0.67Fr + YFa for Fa / Fr > e.
M9300K,MM9300K
M9100K,MM9100K
M200K,MM200K
M300K,MM300K
Pr = Fr
Pr = Fr + 1.20Y1Fa
or
or
Pr = 0.56Fr + Y1Fa Pr = 0.78Fr + 1.625Y1Fa
Pr = Fr
or
Pr = 0.56Fr + Y1Fa
Pr = Fr
or
Pr = 0.56Fr + Y1Fa
Values for e and Y are available in the Spherical Roller Bearing Catalog available on
www.timken.com.
If, in addition to the radial load, an axial load Fa acts on the bearing,
this axial load is taken into consideration when calculating the life
of a bearing (with Fa < Faz; Faz is the allowable axial load).
Table 4. cylindrical roller bearing
dynamic equivalent radial values
Dimension Series
10.. 2..E, 3..E
22..E, 23..E
Load Ratio
Dynamic
Equivalent Load
P = Fr
P = 0.93 Fr + 0.69 Fa
P = Fr
P = 0.93 Fr + 0.45 Fa
Contact
Angle
Single-Row
and Tandem
Mountings
Bearing Type
and or Series
iBCo
Co
20
Pr = Fr
or
Pr = 0.43Fr + Fa
Pr = Fr + 1.09Fa
or
Pr = 0.70Fr + 1.63Fa
5200, 5200W
(see 20 exceptions)
5300, 5300W
(see 20 exceptions)
5400, 5400W
(see 20 exceptions)
30
Pr = Fr
or
Pr = 0.39Fr +0.76Fa
Pr = Fr + 0.78Fa
or
Pr = 0.63Fr + 1.24Fa
7200WN
7300WN
7400WN
40
Pr = Fr
or
Pr = 0.35Fr +0.57Fa
Pr = Fr + 0.55Fa
or
Pr = 0.57Fr + 0.93Fa
2M9300WI
2M9100WI, 2MM9100WI
2M200WI, 2MM200WI
2MM300WI
15
Pr = Fr
Pr = Fr + 1.124Y3Fa
or
or
Pr = 0.44Fr + Y3Fa Pr = 0.72Fr + 1.625Y3Fa
2MM9100WO
3M9300WI
3M9100WI, 3MM9100WI
3M200WI, 3MM200WI
3MM300WI
Pr = Fr
Pr = Fr + 1.124Y2Fa
or
or
Pr = 0.44Fr +Y2Fa Pr = 0.72Fr + 1.625Y2Fa
25
Pr = Fr
or
Pr = 0.41Fr +0.87Fa
Pr = Fr + 0.92Fa
or
Pr = 0.67Fr + 1.41Fa
(1)If Pr > Co or Pr > 1/2 CE consult with your Timken engineer on life calculations.
41
Y1
Y2
Y3
0.015
2.30
1.47
1.60
0.020
2.22
1.44
1.59
0.025
2.10
1.41
1.57
0.030
2.00
1.39
1.56
0.040
1.86
1.35
1.55
0.050
1.76
1.32
1.53
0.060
1.68
1.29
1.51
0.080
1.57
1.25
1.49
0.100
1.48
1.21
1.47
0.120
1.42
1.19
1.45
0.150
1.34
1.14
1.42
0.200
1.25
1.09
1.39
0.250
1.18
1.05
1.35
0.300
1.13
1.02
1.33
0.400
1.05
1.00
1.29
0.500
1.00
1.00
1.25
0.600
1.22
0.800
1.17
1.000
1.13
1.200
1.10
0.47 Fr
K
42
Single-row mounting
To use this table for a single-row mounting, determine if bearings
are direct or indirect mounted and to which bearing, A or B, thrust
Fae is applied. Once the appropriate design is established, follow
across the page opposite that design, and check to determine
which thrust load and dynamic equivalent radial load equations
apply.
Table 7. Dynamic equivalent radial load equations, single-row tapered roller bearing mounting
Design
Bearing A
Bearing A
Thrust Condition
Bearing B
Bearing B
0.47 FrA
KA
Fae
Fae
FrA
FrA
0.47 FrB
KB
+ Fae
FaA =
0.47 FrB
KB
+ Fae
FrB
FrB
Bearing B
Bearing B
Bearing A
Bearing A
0.47 FrA
KA
Fae
Fae
FrA
FrA
Bearing A
Bearing A
Bearing B
Bearing B
F ae
F ae
Bearing A
Bearing A
0.47 FrB
FaB =
0.47 FrA
KA
+ Fae
Bearing B
Bearing B
0.47 FrB
F rB
F rB
>
0.47 FrA
FaA =
FaB =
KA
+ Fae
0.47 FrA
PA = FrA
KA
0.47 FrA
- Fae
KA
Axial Load
F rB
F rB
KB
F ae
F ae
KB
+ Fae
FaA =
Thrust Condition
KB
F rA
F rA
>
0.47 FrB
FrB
FrB
Design
F rA
F rA
Dynamic Equivalent
Radial Load
Axial Load
FaA =
FaB =
0.47 FrA
KA
0.47 FrB
KB
0.47 FrB
KB
Dynamic Equivalent
Radial Load
PA = FrA
KA
0.47 FrA
+ Fae
- Fae
43
Table 8. Dynamic equivalent radial load equations, double-row tapered roller bearing mounting
FrAB Similar Bearing Series
Design
FrC
FFrAB
rAB
FrAB
Bearing A
FFrC
rC
FrC
Bearing B
Bearing B
Bearing B
Bearing B
Bearing A
Bearing A
Bearing A
Fixed Bearing
Fixed Bearing
Fixed Bearing
Fixed Bearing
FrAB
FFrAB
rAB
FrAB
Bearing A
Bearing A
Bearing A
Bearing A
Bearing C
Bearing C
Bearing C
Bearing C
Fae
Fae
Fae
Fae
Bearing B
Bearing B
Bearing B
Bearing B
Bearing C
Bearing C
Bearing C
Bearing A
Bearing A
Bearing A
0.6 FrAB
PB = 0
Bearing B
Fixed Bearing
Fixed Bearing
Fixed Bearing
Fixed Bearing
Fae
Bearing C
Bearing C
Bearing C
0.6 FrAB
KA
PA =
PB =
Fae
Fae
Fae
Fae
Floating Bearing
Floating Bearing
Floating Bearing
Floating Bearing
Bearing B
FrC
FFrC
rC
FrC Bearing C
Bearing B
Bearing B
Bearing B
Bearing C
Bearing C
Bearing C
Fixed Bearing
Fixed Bearing
Fixed Bearing
Fixed Bearing
Dynamic Equivalent
Radial Load
Thrust Condition
FrC
FFrC
rC
FrC Bearing C
Bearing B
Bearing B
Bearing B
Bearing A
Bearing A
Bearing A
0.6 FrAB
Floating Bearing
Floating Bearing
Floating Bearing
FrAB
FFrAB
rAB
FrAB
FrAB
FFrAB
rAB
Bearing
FrAB A
Fae >
Fae
Fae
Fae Floating Bearing
Fae
Bearing A
Fae
Floating Bearing
Floating Bearing
Floating Bearing
Floating Bearing
FrC
FFrC
rC
FrC Bearing C
Fixed Bearing
Fixed Bearing
Fixed Bearing
Fixed Bearing
Dynamic Equivalent
Radial Load
Thrust Condition
Fae
Fae
Fae
Fae
Floating Bearing
Floating Bearing
Floating Bearing
Floating Bearing
Fae >
0.6 FrAB
KA
KA
KA + KB
KB
KA + KB
NOTE: FrAB is the radial load on the double-row assembly. The single-row basic dynamic radial load rating, C90, is to be applied when calculating life based on the above equations.
44
o = 580
()
()
Po
o = 4000
Co
Po
1/2
Co
MPa
()
()
0 = 4200
ksi
0 = 607
1/3
Po
MPa
Co
Po
1/3
Co
ksi
Similar to radial ball bearings, thrust ball bearings use the same
equation for equivalent static and dynamic loading.
Pa = 1.2Fr + Fa
Poa = Xo Fr + Yo Fa
Contact
Angle
(a)
Radial Ball
Angular Contact Ball
Spherical Roller
Single-Row
Xo
Double-Row
Yo
Xo
Yo
0.6
0.5
0.6
0.5
15
0.5
0.47
0.94
20
0.5
0.42
0.84
25
0.5
0.38
0.76
30
0.5
0.33
0.66
35
0.5
0.29
0.58
40
0.5
0.26
0.5
0.22 cota
0.44 cota
45
The bearing data tables do not include static ratings for doublerow bearings. The double-row static radial rating can be
estimated as:
Co(2) = 2Co
Table 10. Static equivalent load equations, single-row tapered roller bearing
Design
Bearing A
Thrust Condition
Bearing B
0.47 FrA
KA
0.47 FrB
KB
FaA =
+ Fae
FaB =
Fae
FrA
FrB
Bearing A
Bearing B
0.47 FrA
FrA
Fae
KA
>
0.47 FrB
KB
Static Equivalent
Radial Load
Axial Load
FaA =
+ Fae
FrB
FaB =
0.47 FrB
KB
POB = FrB
+ Fae
0.47 FrB
KB
0.47 FrA
KA
0.47 FrA
KA
- Fae
46
C0a
1000
(lbf)
Bearing Ratings
There are two fundamental load ratings for bearings, a dynamic load rating and a static load rating.
The dynamic load rating is used to estimate the life of a rotating bearing. Static load ratings are
used to determine the maximum permissible load that can be applied to a non-rotating bearing.
The basic static radial load rating and thrust load rating for
Timken bearings are based on a maximum contact stress within
a non-rotating bearing of 4000 MPa (580 ksi) for roller bearings
and 4200 MPa (609 ksi) for ball bearings, at the center of contact
on the most heavily loaded rolling element.
The 4000 MPa (580 ksi) or 4200 MPa (609 ksi) stress levels may
cause visible light Brinell marks on the bearing raceways. This
degree of marking will not have a measurable effect on fatigue
life when the bearing is subsequently rotating under a lower
application load. If sound, vibration or torque are critical, or if a
pronounced shock load is present, a lower load limit should be
applied. For more information on selecting a bearing for static
load conditions, consult your Timken engineer.
47
Bearing Life
Many different performance criteria exist that dictate how a
bearing should be selected. These include bearing fatigue life,
rotational precision, power requirements, temperature limits,
speed capabilities, sound, etc. This section deals primarily with
bearing life as related to material-associated fatigue. Bearing
life is defined as the length of time, or number of revolutions,
until a fatigue spall of 6 mm2 (0.01 in.2) develops. Since fatigue
is a statistical phenomenon, the life of an individual bearing
is impossible to predetermine precisely. Bearings that may
appear to be identical can exhibit considerable life scatter when
tested under identical conditions. Thus it is necessary to base
life predictions on a statistical evaluation of a large number
of bearings operating under similar conditions. The Weibull
distribution function is the accepted standard for predicting the
life of a population of bearings at any given reliability level.
Rating Life
Rating life, (L10), is the life that 90 percent of a group of apparently
identical bearings will complete or exceed before a fatigue spall
develops. The L10 life also is associated with 90 percent reliability
for a single bearing under a certain load.
()
C
Pr
(1x106)
revolutions
L10 =
()
L10 =
() ( )
L10 =
( )
L10 =
( )
or
and
or
C90
10/3
Pr
C90
(90x106)
10/3
Pr
Ca90
90x106
hours
60n
10/3
Pa
Ca90
revolutions
10/3
Pa
(90x106)
90x106
60n
revolutions
hours
L10 =
()( )
C
Pr
1x106
60n
hours
()
L10 =
( )( )
or
Ca
Pa
Ca
Pa
(1x10 6 )
1x106
60n
revolutions
hours
48
Lna = a1a2a3L10
The Timken expanded bearing life equation is:
( )
C
Lna = a1a2a3da3ka3la3ma3p
Pr
(1x106) revolutions
Where:
e = 3 for ball bearings
= 10/3 for tapered, cylindrical and spherical
roller bearings
( )
a1 = 4.26 ln
100
R
2/3
+ 0.05
Ln
a1
90
L10
1.00
95
L5
0.64
96
L4
0.55
97
L3
0.47
98
L2
0.37
99
L1
0.25
99.5
L0.5
0.175
99.9
L0.1
0.093
that contact stresses are approximately less than 2400 MPa (350
ksi), and adequate lubrication is provided. It is important to note
that improvements in material cannot offset poor lubrication in
an operating bearing system. Consult your Timken engineer for
applicability of the material factor.
49
The arc defined by the rollers supporting the load is called the
bearing load zone. The load zone is significantly influenced
by bearing setting or internal clearance, either radial or axial
depending on the bearing type. Neglecting preload, less clearance
in a bearing results in a larger load zone and subsequently longer
bearing life.
The dynamic equivalent load (Pr) is used instead of the applied
load (Fr) to approximate the combined load zone effect on L10a.
If a more accurate assessment of the load zone adjusted life is
necessary (e.g., including the effects of internal clearance or
fitting practice), consult your Timken engineer.
Cg is given for most part numbers that are available in the bearing
catalogs on www.timken.com. The geometry factor also includes
the material effects and load zone considerations for non-tapered
roller bearings, as these also are inherent to the bearing design.
However, it should be noted that the primary effect of the load
zone is on roller load distributions and contact stresses within
the bearing, which are not quantified within the lubrication factor.
Refer to the previous section Load Zone Life Factor (a3k) for more
information.
The geometry factor (Cg) is not applicable to our DuraSpexx
product. For more information on our DuraSpexx product, consult
your Timken engineer.
50
1.0
Ball Bearings
Roller Bearings
0.9
0.8
0.7
Cl
0.6
0.5
0.4
0.3
0.2
0.1
0.0
10
100
1000
10000
Pr (Newtons)
100000
1000000
10000000
Fig. 70. Load factor (Cl) vs. dynamic equivalent bearing load (Pr).
1
0.9
For all non-tapered roller bearings, the load zone factor is one
(1). For tapered roller bearings, the load zone factor can be taken
from fig. 71.
0.8
0.747
Cj
0.7
0.6
0.5
0 0.5 1 1.5 2
Fr
Fa K
2.5
Fig. 71. Load zone factor (Cj) for tapered roller bearings.
TIMKEN ENGINEERING MANUAL
51
1000
Ball Bearings
Roller Bearings
100
10
Fig. 72. Speed factor (Cs) vs.
rotational speed.
10
100
1000
Rotational Speed (RPM)
10000
10000
1000
100
ISO VG
680
460
320
220
150
100
68
46
32
10
1000
Ball Bearings
Roller Bearings
Cv
100
10
Fig. 74. Viscosity factor (Cv) vs.
kinematic viscosity.
52
10
100
1000
Kinematic Viscosity (cSt)
10000
C/Pr =13.48
C/Pr =9.63
C/Pr =7.7
C/Pr =6.74
C/Pr =5.78
C/Pr =5.12
4.5
4
C/Pr =4.81
3.5
3
2.5
C/Pr =4.24
2
1.5
C/Pr =3.85
C/Pr =3.5
C/Pr =3.08
0.5
53
Degrees
<20
1.2
0.07
20-35
0.5
0.03
>35
100
0
A. Raceway length
No special profile
700
600
Stress (ksi)
500
400
300
200
100
0
B. Raceway length
Special profile
54
300
200
400
238
0.5
0.75
223, 240
232, 241
1.25
55
Specification
56
Timken
AA
ISO/DIN
P0
P6
P5
P4
P2
ABMA
Inch
Bearing Type
RBEC 1
RBEC 3
RBEC 5
RBEC 7
RBEC 9
Ball Bearings
ABEC 1
ABEC 3
ABEC 5
ABEC 7
ABEC 9
Timken
00
000
ABMA
00
METRIC SYSTEM
Radial ball, spherical and cylindrical roller bearings
Standard Timken radial ball, radial spherical roller and radial
cylindrical roller bearings maintain normal tolerances according
to the current ISO 492 standard. Tables 15 and 16 list the critical
tolerances for these bearing types. For applications where running
tolerance is critical, P6 or P5 tolerances are recommended.
Table 15. Radial ball, spherical and cylindrical roller bearing tolerances inner ring (Metric)
Bore Deviation(1)
dmp
Bearing Bore
Width Variation
VBs
Face
Runout
with Bore
Sd
Radial Runout
Kia
Axial
Runout
Sia
Width Deviation
Inner & Outer Rings(1)
Bs and Cs
Over
Incl.
P0
P6
P5
P0
P6
P5
P0
P6
P5
P5
P5
P0, P6
P5
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
2.5000
0.0984
10.000
0.3937
-0.008
-0.0003
-0.007
-0.0003
-0.005
-0.0002
0.015
0.0006
0.015
0.0006
0.005
0.0002
0.010
0.0004
0.006
0.0002
0.004
0.0002
0.007
0.0003
0.007
0.0003
-0.120
-0.0047
-0.040
-0.0157
10.000
0.3937
18.000
0.7087
-0.008
-0.0003
-0.007
-0.0003
-0.005
-0.0002
0.020
0.0008
0.020
0.0008
0.005
0.0002
0.010
0.0004
0.007
0.0003
0.004
0.0002
0.007
0.0003
0.007
0.0003
-0.120
-0.0047
-0.080
-0.0031
18.000
0.7087
30.000
1.1811
-0.010
-0.0004
-0.008
-0.0003
-0.006
-0.0002
0.020
0.0008
0.020
0.0008
0.005
0.0002
0.013
0.0005
0.008
0.0003
0.004
0.0002
0.008
0.0003
0.008
0.0003
-0.120
-0.0047
-0.120
-0.0047
30.000
1.1811
50.000
1.9685
-0.012
-0.0005
-0.010
-0.0004
-0.008
-0.0003
0.020
0.0008
0.020
0.0008
0.005
0.0002
0.015
0.0006
0.010
0.0004
0.005
0.0002
0.008
0.0003
0.008
0.0003
-0.120
-0.0047
-0.120
-0.0047
50.000
1.9685
80.000
3.1496
-0.015
-0.0006
-0.012
-0.0005
-0.009
-0.0004
0.025
0.0010
0.025
0.0010
0.006
0.0002
0.020
0.0008
0.010
0.0004
0.005
0.0002
0.008
0.0003
0.008
0.0003
-0.150
-0.0059
-0.150
-0.0059
80.000
3.1496
120.000
4.7244
-0.020
-0.0008
-0.015
-0.0006
-0.010
-0.0004
0.025
0.0010
0.025
0.0010
0.007
0.0003
0.025
0.0010
0.013
0.0005
0.006
0.0002
0.009
0.0004
0.009
0.0004
-0.200
-0.0079
-0.200
-0.0079
120.000
4.7244
150.000
5.9055
-0.025
-0.0010
-0.018
-0.0007
-0.013
-0.0005
0.030
0.0012
0.030
0.0012
0.008
0.0003
0.030
0.0012
0.018
0.0007
0.008
0.0003
0.010
0.0004
0.010
0.0004
-0.250
-0.0098
-0.250
-0.0098
150.000
5.9055
180.000
7.0866
-0.025
-0.0010
-0.018
-0.0007
-0.013
-0.0005
0.030
0.0012
0.030
0.0012
0.008
0.0003
0.030
0.0012
0.018
0.0007
0.008
0.0003
0.010
0.0004
0.010
0.0004
-0.250
-0.0098
-0.250
-0.0098
180.000
7.0866
250.000
9.8425
-0.030
-0.0012
-0.022
-0.0009
-0.015
-0.0006
0.030
0.0012
0.030
0.0012
0.010
0.0004
0.040
0.0016
0.020
0.0008
0.010
0.0004
0.011
0.0004
0.013
0.0005
-0.300
-0.0018
-0.300
-0.0018
250.000
9.8425
315.000
12.4016
-0.035
-0.0014
-0.025
-0.0010
-0.018
-0.0007
0.035
0.0014
0.035
0.0014
0.013
0.0005
0.050
0.0020
0.025
0.0010
0.013
0.0005
0.013
0.0005
0.015
0.0006
-0.350
-0.0138
-0.350
-0.0138
315.000
12.4016
400.000
15.7480
-0.040
-0.0016
-0.030
-0.0012
-0.023
-0.0009
0.040
0.0016
0.040
0.0016
0.015
0.0006
0.060
0.0024
0.030
0.0012
0.015
0.0006
0.015
0.0006
0.020
0.0008
-0.400
-0.0157
-0.400
-0.0157
400.000
15.7480
500.000
19.6850
-0.045
-0.0018
-0.035
-0.0014
0.050
0.0020
0.045
0.0018
0.065
0.0026
0.035
0.0014
-0.450
-0.0177
500.000
19.6850
630.000
24.8031
-0.050
-0.0020
-0.040
-0.0016
0.060
0.0024
0.050
0.0020
0.070
0.0028
0.040
0.0016
-0.500
-0.0197
630.000
24.8031
800.000
31.4961
-0.075
-0.0030
0.070
0.0028
0.080
0.0031
-0.750
-0.0295
(1)Tolerance
57
Table 16. Radial ball, spherical and cylindrical roller bearing tolerances outer ring (Metric)
Outside Deviation(1)
Dmp
Bearing O.D.
Width Variation
Vcs
Radial Runout
Kea
Axial
Runout
Sea
Outside
Diameter
Runout
With Face
SD
Over
Incl.
P0
P6
P5
P0
P6
P0
P6
P5
P5
P5
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
18.000
0.7087
-0.008
-0.0003
-0.007
-0.0003
-0.005
-0.0002
0.015
0.0006
0.005
0.0002
0.015
0.0006
0.008
0.0003
0.005
0.0002
0.008
0.0003
0.008
0.0003
18.000
0.7087
30.000
1.1811
-0.009
-0.0004
-0.008
-0.0003
-0.006
-0.00024
0.020
0.0008
0.005
0.0002
0.015
0.0006
0.009
0.0004
0.006
0.00024
0.008
0.0003
0.008
0.0003
30.000
1.1811
50.000
1.9685
-0.011
-0.0004
-0.009
-0.0004
-0.007
-0.0003
0.020
0.0008
0.005
0.0002
0.020
0.0008
0.010
0.0004
0.007
0.0003
0.008
0.0003
0.008
0.0003
50.000
1.9685
80.000
3.1496
-0.013
-0.0005
-0.011
-0.0004
-0.009
-0.0004
0.025
0.0010
0.006
0.00024
0.025
0.0010
0.013
0.0005
0.008
0.0003
0.010
0.0004
0.008
0.0003
80.000
3.1496
120.000
4.7244
-0.015
-0.0006
-0.013
-0.0005
-0.010
-0.0004
0.025
0.0010
0.008
0.0003
0.035
0.0014
0.018
0.0007
0.010
0.0004
0.011
0.0004
0.009
0.0004
120.000
4.7244
150.000
5.9055
-0.018
-0.0007
-0.015
-0.0006
-0.011
-0.0004
0.030
0.0012
0.008
0.0003
0.040
0.0016
0.020
0.0008
0.011
0.0004
0.013
0.0005
0.010
0.0004
150.000
5.9055
180.000
7.0866
-0.025
-0.0010
-0.018
-0.0007
-0.013
-0.0005
0.030
0.0012
0.008
0.0003
0.045
0.0018
0.023
0.0009
0.013
0.0005
0.014
0.0006
0.010
0.0004
180.000
7.0866
250.000
9.8425
-0.030
-0.0012
-0.020
-0.0008
-0.015
-0.0006
0.030
0.0012
0.010
0.0004
0.050
0.0020
0.025
0.0010
0.015
0.0006
0.015
0.0006
0.011
0.0004
250.000
9.8425
315.000
12.4016
-0.035
-0.0014
-0.025
-0.0010
-0.018
-0.0007
0.035
0.0014
0.011
0.0004
0.060
0.0024
0.030
0.0012
0.018
0.0007
0.018
0.0007
0.013
0.0005
315.000
12.4016
400.000
15.7480
-0.040
-0.0016
-0.028
-0.0011
-0.020
-0.0008
0.040
0.0016
0.013
0.0005
0.070
0.0028
0.035
0.0014
0.020
0.0008
0.020
0.0008
0.013
0.0005
400.000
15.7480
500.000
19.6850
-0.045
-0.0018
-0.033
-0.0013
-0.023
-0.0009
0.045
0.0018
0.015
0.0006
0.080
0.0031
0.040
0.0016
0.023
0.0009
0.023
0.0009
0.015
0.0006
500.000
19.6850
630.000
24.8031
-0.050
-0.0020
-0.038
-0.0015
-0.028
-0.0011
0.050
0.0020
0.018
0.0007
0.100
0.0039
0.050
0.0020
0.025
0.0010
0.025
0.0010
0.018
0.0007
630.000
24.8031
800.000
31.4961
-0.075
-0.0030
-0.045
-0.0018
-0.035
-0.0014
0.020
0.0008
0.120
0.0047
0.060
0.0024
0.030
0.0012
0.030
0.0012
0.020
0.0008
800.000
31.4961
1000.000
39.3701
-0.100
-0.0040
-0.060
-0.0024
0.140
0.0055
0.075
0.0030
1000.000
39.3701
1250.000
49.2126
-0.125
-0.0050
0.160
0.0063
(1)Tolerance
Incl.
mm
in.
mm
in.
0.000
0.0000
O.D.
Tolerance(1)
Bearing O.D.
Over
Incl.
mm
in.
mm
in.
mm
in.
171.450
6.7500
+0.127
+0.0050
0.000
0.0000
171.450
6.7500
508.000
20.0000
+0.178
+0.0070
Bearing Bore
Tolerance
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
134.938
5.3125
-0.051
-0.0020
0.000
0.0000
46.038
1.8125
+0.127
+0.0050
-0.127
-0.0050
134.938
5.3125
441.325
17.3750
-0.076
-0.0030
46.038
1.8125
304.800
12.0000
+0.254
+0.0100
-0.254
-0.0100
441.325
17.3750
1000.000
39.3701
-0.102
-0.0040
304.800
12.0000
508.000
20.0000
+0.381
+0.0150
-0.381
-0.0150
58
Height
Tolerance(1)
Table 18. Thrust ball bearing tolerances TYPES TVL & DTVL
Bore
Bearing Bore
Over
Incl.
mm
in.
mm
in.
0.000
0.0000
504.825
19.8750
O.D.
Bearing O.D.
Tolerance(1)
Height
Tolerance(1)
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
504.825
19.8750
-0.076
-0.0030
0.000
0.0000
584.000
23.0000
-0.076
-0.0030
1524.000
60.0000
-0.127
-0.0050
584.000
23.0000
1778.000
70.0000
-0.127
-0.0050
Bearing Bore
Tolerance
Over
Incl.
Max.
mm
in.
mm
in.
mm
in.
0.381
0.0150
All Sizes
Outer Ring
Bore
Tolerance
Bore(1)
O.D.
Bore Diameter
Tolerance
O.D.(1)
Radial
Runout
Over
Incl.
Tolerance
Height
Radial
Runout
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
150.000
5.9055
-0.020
-0.0080
0.041
0.0016
80.000
3.1496
120.000
4.7244
+0.094
+0.0037
-0.254
-0.0100
150.000
5.9055
180.000
7.0866
-0.025
-0.0010
0.046
0.0018
120.000
4.7244
180.000
7.0866
+0.109
+0.0043
-0.300
-0.0118
0.041
0.0016
180.000
7.0866
250.000
9.8425
-0.030
-0.0012
0.051
0.0020
180.000
7.0866
250.000
9.8425
+0.130
+0.0051
-0.366
-0.0144
-0.036
-0.0014
0.051
0.0020
250.000
9.8425
315.000
12.4016
-0.036
-0.0014
0.061
0.0024
250.000
9.8425
315.000
12.4016
+0.155
+0.0061
-0.434
-0.0171
400.000
15.7480
-0.041
-0.0016
0.061
0.0024
315.000
12.4016
400.000
15.7480
-0.041
-0.0016
0.071
0.0028
315.000
12.4016
400.000
15.7480
+0.170
+0.0067
-0.480
-0.0189
400.000
15.7480
500.000
19.6850
-0.046
-0.0018
0.066
0.0026
400.000
15.7480
500.000
19.6850
-0.046
-0.0018
0.081
0.0032
400.000
15.7480
500.000
19.6850
+0.185
+0.0073
-0.526
-0.0207
500.000
19.6850
630.000
24.8031
-0.051
-0.0020
0.071
0.0028
500.000
19.6850
630.000
24.8031
-0.051
-0.0020
0.102
0.0040
500.000
19.6850
and up
+0.203
+0.0080
-0.584
-0.0230
630.000
24.8031
800.000
31.4961
-0.076
-0.0030
0.081
0.0032
630.000
24.8031
800.000
31.4961
-0.076
-0.0030
0.119
0.0047
800.000
31.4961
1000.000
39.3701
-0.102
-0.0040
0.089
0.0035
800.000
31.4961
1000.000
39.3701
-0.102
-0.0040
0.140
0.0055
1000.000
39.3701
1250.000
49.2126
-0.127
-0.0050
0.102
0.0040
1000.000
39.3701
1250.000
49.2126
-0.127
-0.0050
0.163
0.0064
1250.000
49.2126
1600.000
62.9921
-0.165
-0.0065
0.193
0.0076
1600.000
62.9921
2000.000
78.7402
-0.203
-0.0080
0.229
0.009
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
80.000
3.1496
120.000
4.7244
-0.020
-0.0008
0.025
0.0010
120.000
4.7244
120.000
4.7244
180.000
7.0866
-0.025
-0.0010
0.030
0.0012
180.000
7.0866
250.000
9.8425
-0.030
-0.0012
250.000
9.8425
315.000
12.4016
315.000
12.4016
(1)Tolerance
59
Table 20. tapered roller bearing tolerances Inner ring Bore (Metric)
TS
TSF
SR(1)
Bore
Bearing
Types
AA
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
18.000
0.7087
0.000 -0.012 0.000 -0.012 0.000 -0.007 0.000 -0.005 0.000 -0.005 0.000 -0.005
0.0000 -0.00047 0.0000 -0.00047 0.0000 -0.0002 0.0000 -0.0001 0.0000 -0.0001 0.0000 -0.0001
18.000
0.7087
30.000
1.1811
0.000 -0.012 0.000 -0.012 0.000 -0.008 0.000 -0.006 0.000 -0.006 0.000 -0.006
0.0000 -0.0005 0.0000 -0.0005 0.0000 -0.0003 0.0000 -0.0002 0.0000 -0.0002 0.0000 -0.0002
30.000
1.1811
50.000
1.9685
0.000 -0.012 0.000 -0.012 0.000 -0.010 0.000 -0.008 0.000 -0.008 0.000 -0.008
0.0000 -0.0005 0.0000 -0.0005 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003 0.0000 -0.0003
50.000
1.9685
80.000
3.1496
0.000 -0.015 0.000 -0.015 0.000 -0.012 0.000 -0.009 0.000 -0.008 0.000 -0.008
0.0000 -0.0006 0.0000 -0.0006 0.0000 -0.0005 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003
80.000
3.1496
120.000
4.7244
0.000 -0.020 0.000 -0.020 0.000 -0.015 0.000 -0.010 0.000 -0.008 0.000 -0.008
0.0000 -0.00079 0.0000 -0.00079 0.0000 -0.0006 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003
120.000
4.7244
180.000
7.0886
0.000 -0.025 0.000 -0.025 0.000 -0.018 0.000 -0.013 0.000 -0.008 0.000 -0.008
0.0000 -0.00098 0.0000 -0.00098 0.0000 -0.0007 0.0000 -0.0005 0.0000 -0.0003 0.0000 -0.0003
180.000
7.0866
250.000
9.8425
0.000 -0.030 0.000 -0.030 0.000 -0.022 0.000 -0.015 0.000 -0.008 0.000 -0.008
0.0000 -0.0012 0.0000 -0.0012 0.0000 -0.0009 0.0000 -0.0006 0.0000 -0.0003 0.0000 -0.0003
250.000
9.8425
265.000
10.4331
0.000 -0.035 0.000 -0.035 0.000 -0.022 0.000 -0.015 0.000 -0.008 0.000 -0.008
0.0000 -0.0014 0.0000 -0.0014 0.0000 -0.0009 0.0000 -0.0006 0.0000 -0.0003 0.0000 -0.0003
265.000
10.4331
315.000
12.4016
0.000 -0.035 0.000 -0.035 0.000 -0.022 0.000 -0.015 0.000 -0.008 0.000 -0.008
0.0000 -0.0014 0.0000 -0.0014 0.0000 -0.0009 0.0000 -0.0006 0.0000 -0.0003 0.0000 -0.0003
315.000
12.4016
400.000
15.7480
400.000
15.7480
500.000
19.6850
500.000
19.6850
630.000
24.8031
630.000
24.8031
800.000
31.4961
0.000 -0.080
0.0000 -0.0031
0.000 -0.040
0.0000 -0.0014
800.000
31.4961
0.000 -0.050
0.0000 -0.0020
0.000 -0.060
0.0000 -0.0024
0.000 -0.080
0.0000 -0.0031
2000.000
78.7402
0.000 -0.250
0.0000 -0.0098
60
Table 21. tapered roller bearing tolerances Outer ring outside diameter (Metric)
Bearing
Type
TS
TSF
SR(1)
O.D.
AA
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
18.000
0.7087
0.000
0.0000
18.000
0.7087
30.000
1.1811
0.000 -0.012 0.000 -0.012 0.000 -0.008 0.000 -0.0006 0.000 -0.008 0.000 -0.008
0.0000 -0.00047 0.0000 -0.00047 0.0000 -0.0003 0.0000 -0.0002 0.0000 -0.0003 0.0000 -0.0003
30.000
1.1811
50.000
1.9685
0.000 -0.014 0.000 -0.014 0.000 -0.009 0.000 -0.007 0.000 -0.008 0.000 -0.008
0.0000 -0.0005 0.0000 -0.0005 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003 0.0000 -0.0003
50.000
1.9685
80.000
3.1496
0.000 -0.016 0.000 -0.016 0.000 -0.011 0.000 -0.009 0.000 -0.008 0.000 -0.008
0.0000 -0.0006 0.0000 -0.0006 0.0000 -0.0004 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003
80.000
3.1496
120.000
4.7244
0.000 -0.018 0.000 -0.018 0.000 -0.013 0.000 -0.010 0.000 -0.008 0.000 -0.008
0.0000 -0.0007 0.0000 -0.0007 0.0000 -0.0005 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003
120.000
4.7244
150.000
5.9055
0.000 -0.020 0.000 -0.020 0.000 -0.015 0.000 -0.011 0.000 -0.008 0.000 -0.008
0.0000 -0.00079 0.0000 -0.00079 0.0000 -0.0006 0.0000 -0.0004 0.0000 -0.0003 0.0000 -0.0003
150.000
5.9055
180.000
7.0866
0.000 -0.025 0.000 -0.025 0.000 -0.018 0.000 -0.013 0.000 -0.008 0.000 -0.008
0.0000 -0.00098 0.0000 -0.00098 0.0000 -0.0007 0.0000 -0.0005 0.0000 -0.0003 0.0000 -0.0003
180.000
7.0866
250.000
9.8425
0.000 -0.030 0.000 -0.030 0.000 -0.020 0.000 -0.015 0.000 -0.008 0.000 -0.008
0.0000 -0.0012 0.0000 -0.0012 0.0000 -0.0008 0.0000 -0.0006 0.0000 -0.0003 0.0000 -0.0003
250.000
9.8425
265.000
10.4331
0.000 -0.035 0.000 -0.035 0.000 -0.025 0.000 -0.018 0.000 -0.008 0.000 -0.008
0.0000 -0.0014 0.0000 -0.0014 0.0000 -0.0010 0.0000 -0.0007 0.0000 -0.0003 0.0000 -0.0003
265.000
10.4331
315.000
12.4016
0.000 -0.035 0.000 -0.035 0.000 -0.025 0.000 -0.018 0.000 -0.008 0.000 -0.008
0.0000 -0.0014 0.0000 -0.0014 0.0000 -0.0010 0.0000 -0.0007 0.0000 -0.0003 0.0000 -0.0003
315.000
12.4016
400.000
15.7480
400.000
15.7480
500.000
19.6850
500.000
19.6850
630.000
24.8031
630.000
24.8031
800.000
31.4961
0.000 -0.075
0.0000 -0.0030
0.000 -0.040
0.0000 *0.0016
0.000 -0.050
0.0000 -0.0020
0.000 -0.060
0.0000 -0.0024
0.000 -0.080
0.0000 -0.0031
2000.000
78.7402
0.000 -0.250
0.0000 -0.0098
61
Table 22. tapered roller bearing tolerances inner ring width (Metric)
TS
TSF
62
Bore
Bearing
Types
AA
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
50.000
1.9685
0.000 -0.100 0.000 -0.050 0.000 -0.200 0.000 -0.200 0.000 -0.200 0.000 -0.200
0.0000 -0.0040 0.0000 -0.0020 0.0000 -0.0079 0.0000 -0.0079 0.0000 -0.0079 0.0000 -0.0079
50.000
1.9685
120.000
4.7244
0.000 -0.150 0.000 -0.050 0.000 -0.300 0.000 -0.300 0.000 -0.300 0.000 -0.300
0.0000 -0.0059 0.0000 -0.0020 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118
120.000
4.7244
180.000
7.0866
0.000 -0.200 0.000 -0.050 0.000 -0.300 0.000 -0.300 0.000 -0.300 0.000 -0.300
0.0000 -0.0079 0.0000 -0.0020 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118
180.000
7.0866
250.000
9.8425
0.000 -0.200 0.000 -0.050 0.000 -0.350 0.000 -0.350 0.000 -0.350 0.000 -0.350
0.0000 -0.0079 0.0000 -0.0020 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138
250.000
9.8425
265.000
10.4331
0.000 -0.200 0.000 -0.050 0.000 -0.350 0.000 -0.350 0.000 -0.350 0.000 -0.350
0.0000 -0.0079 0.0000 -0.0020 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138
265.000
10.4331
315.000
12.4016
0.000 -0.200 0.000 -0.050 0.000 -0.350 0.000 -0.350 0.000 -0.350 0.000 -0.350
0.0000 -0.0079 0.0000 -0.0020 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138
315.000
12.4016
500.000
19.6850
500.000
19.6850
630.000
24.8031
0.000 -0.350
0.0000 -0.0138
0.000 -0.350
0.0000 -0.0138
1600.000
62.9921
0.000 -0.350
0.0000 -0.0138
Table 23. tapered roller bearing tolerances inner ring stand (Metric)
Bearing
Types
TS
TSF
Bore
AA
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
80.000
3.1496
80.000
3.1496
120.000
4.7244
180.000
7.0866
250.000
9.8425
265.000
10.4331
315.000
12.4016
400.000
15.7480
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
63
Table 24. tapered roller bearing tolerances Outer ring width (Metric)
TS
TSF
O.D.
Bearing
Types
AA
Over
Incl.
Max.
Min.(1)
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
80.000
3.1496
0.000 -0.150 0.000 -0.100 0.000 -0.150 0.000 -0.150 0.000 -0.150 0.000 -0.150
0.0000 -0.0059 0.0000 -0.0040 0.0000 -0.0059 0.0000 -0.0059 0.0000 -0.0059 0.0000 -0.0059
80.000
3.1496
150.000
5.9055
0.000 -0.200 0.000 -0.100 0.000 -0.200 0.000 -0.200 0.000 -0.200 0.000 -0.200
0.0000 -0.0079 0.0000 -0.0040 0.0000 -0.0079 0.0000 -0.0079 0.0000 -0.0079 0.0000 -0.0079
150.000
5.9055
180.000
7.0866
0.000 -0.200 0.000 -0.100 0.000 -0.250 0.000 -0.250 0.000 -0.250 0.000 -0.250
0.0000 -0.0079 0.0000 -0.0040 0.0000 -0.0098 0.0000 -0.0098 0.0000 -0.0098 0.0000 -0.0098
180.000
7.0866
250.000
9.8425
0.000 -0.250 0.000 -0.100 0.000 -0.250 0.000 -0.250 0.000 -0.250 0.000 -0.250
0.0000 -0.0098 0.0000 -0.0040 0.0000 -0.0098 0.0000 -0.0098 0.0000 -0.0098 0.0000 -0.0098
250.000
9.8425
265.000
10.4331
0.000 -0.250 0.000 -0.100 0.000 -0.300 0.000 -0.300 0.000 -0.300 0.000 -0.300
0.0000 -0.0098 0.0000 -0.0040 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118
265.000
10.4331
315.000
12.4016
0.000 -0.250 0.000 -0.100 0.000 -0.300 0.000 -0.300 0.000 -0.300 0.000 -0.300
0.0000 -0.0098 0.0000 -0.0040 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118 0.0000 -0.0118
315.000
12.4016
400.000
15.7480
400.000
15.7480
500.000
19.6850
500.000
19.6850
800.000
31.4961
800.000
31.4961
1600.000
62.9921
0.000 -0.400
0.0000 -0.0157
0.000 -0.400
0.0000 -0.0157
0.000 -0.400
0.0000 -0.0157
(1)These differ slightly from tolerances in ISO 492. These differences normally have an insignificant effect on the mounting and performance
of tapered roller bearings. The 30000 series ISO bearings also are available with the above parameter according to ISO 492.
64
Table 25. tapered roller bearing tolerances Outer ring stand (Metric)
Bearing
Types
TS
TSF(1)
O.D.
AA
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
18.000
0.7087
18.000
0.7087
80.000
3.1496
80.000
3.1496
120.000
4.7244
265.000
10.4331
315.000
12.4016
315.000
12.4016
400.000
15.7480
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(1)Stand for flanged outer ring is measured from flange backface (seating face).
(2)These sizes manufactured as matched assemblies only.
65
Table 26. tapered roller bearing tolerances overall bearing width (Metric)
TS
TSF(1)
SR(2)
Bore
Bearing
Types
AA
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
80.000
3.1496
80.000
3.1496
120.000 +0.200 -0.200 +0.100 0.000 +0.200 -0.200 +0.200 -0.200 +0.200 -0.200 +0.200 -0.200
4.7244 +0.0078 -0.0078 +0.0039 0.0000 +0.0078 -0.0078 +0.0078 -0.0078 +0.0078 -0.0078 +0.0078 -0.0078
120.000
4.7244
180.000 +0.350 -0.250 +0.150 0.000 +0.350 -0.250 +0.200 -0.250 +0.200 -0.250 +0.200 -0.250
7.0866 +0.0137 -0.0098 +0.0059 0.0000 +0.0137 -0.0098 +0.0078 -0.0098 +0.0078 -0.0098 +0.0078 -0.0098
180.000
7.0866
250.000 +0.350 -0.250 +0.150 0.000 +0.350 -0.250 +0.200 -0.300 +0.200 -0.300 +0.200 -0.300
9.8425 +0.0137 -0.0098 +0.0059 0.0000 +0.0137 -0.0098 +0.0078 -0.0118 +0.0078 -0.0118 +0.0078 -0.0118
250.000
9.8425
265.000 +0.350 -0.250 +0.200 0.000 +0.350 -0.300 +0.200 -0.300 +0.200 -0.300 +0.200 -0.300
10.4331 +0.0137 -0.0098 +0.0078 0.0000 +0.0137 -0.0118 +0.0078 -0.0118 +0.0078 -0.0118 +0.0078 -0.0118
265.000
10.4331
315.000 +0.350 -0.250 +0.200 0.000 +0.350 -0.300 +0.200 -0.300 +0.200 -0.300 +0.200 -0.300
12.4016 +0.0137 -0.0098 +0.0078 0.0000 +0.0137 -0.0118 +0.0078 -0.0118 +0.0078 -0.0118 +0.0078 -0.0118
315.000
12.4016
500.000
19.6850
+0.350 -0.400
+0.0137 -0.0157
+0.350 -0.400
+0.0137 -0.0157
+0.350 -0.450
+0.0137 -0.0177
+0.350 -0.500
+0.0137 -0.0196
1600.000
62.9921
180.000
7.0866
+0.200 0.000 +0.100 0.000 +0.200 -0.200 +0.200 -0.200 +0.200 -0.200 +0.200 -0.200
+0.0078 0.0000 +0.0039 0.0000 +0.0078 -0.0078 +0.0078 -0.0078 +0.0078 -0.0078 +0.0078 -0.0078
+0.450 -0.450
+0.0177 -0.0177
250.000
9.8425
0.000 -0.200 0.000 -0.050 0.000 -0.350 0.000 -0.350 0.000 -0.350 0.000 -0.350
0.0000 -0.0079 0.0000 -0.0020 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138 0.0000 -0.0138
(1)For bearing type TSF, the tolerance applies to the dimension T1. Refer to the Tapered Roller Bearing Catalog available on www.timken.com.
(2)SR assemblies are manufactured to tolerance class N only.
66
TS
TSF
SR(1)
O.D.
Over
Incl.
AA
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10.000
0.3937
18.000
0.7087
0.002
0.00008
0.001
0.00004
18.000
0.7087
30.000
1.1811
0.018
0.0007
0.018
0.0007
0.005
0.0002
0.003
0.0001
0.002
0.00008
0.001
0.00004
30.000
1.1811
50.000
1.9685
0.020
0.0008
0.020
0.0008
0.006
0.0002
0.003
0.0001
0.002
0.00008
0.001
0.00004
50.000
1.9685
80.000
3.1496
0.025
0.0010
0.025
0.0010
0.006
0.0002
0.004
0.0002
0.002
0.00008
0.001
0.00004
80.000
3.1496
120.000
4.7244
0.035
0.0014
0.035
0.0014
0.006
0.0002
0.004
0.0002
0.002
0.00008
0.001
0.00004
120.000
4.7244
150.000
5.9055
0.040
0.0016
0.040
0.0016
0.007
0.0003
0.004
0.0002
0.002
0.00008
0.001
0.00004
150.000
5.9055
180.000
7.0866
0.045
0.0018
0.045
0.0018
0.008
0.0003
0.004
0.0002
0.002
0.00008
0.001
0.00004
180.000
7.0866
250.000
9.8425
0.050
0.0020
0.050
0.0020
0.010
0.0004
0.005
0.0002
0.002
0.00008
0.001
0.00004
250.000
9.8425
265.000
10.4331
0.060
0.0024
0.060
0.0024
0.011
0.0004
0.005
0.0002
0.002
0.00008
0.001
0.00004
265.000
10.4331
315.000
12.4016
0.060
0.0024
0.060
0.0024
0.011
0.0004
0.005
0.0002
0.002
0.00008
0.001
0.00004
315.000
12.4016
400.000
15.7480
0.070
0.0028
0.070
0.0028
0.013
0.0005
0.005
0.0002
400.000
15.7480
500.000
19.6850
0.080
0.0031
0.080
0.0031
500.000
19.6850
630.000
24.8031
0.100
0.0039
630.000
24.8031
800.000
31.4961
0.120
0.0047
800.000 1000.000
31.4961 39.3701
0.140
0.0055
1000.000 1200.000
39.3701 47.2441
0.160
0.0063
1200.000 1600.000
47.2441 62.9921
0.180
0.0071
1600.000 2000.000
62.9921 78.7402
0.200
0.0079
0.200
0.0079
2000.000
78.7402
67
Inch System
Tapered roller bearings
Inch system bearings are manufactured to a number of tolerance classes. Classes 4 and 2
are often referred to as standard classes. Classes 3, 0, 00 and 000 are precision classes. Inch
system bearings conform to ABMA standard 19.2.
Table 28. Tapered Roller Bearing Tolerances Inner ring Bore (Inch)
TS
TSF
TSL(1)
TDI
TDIT
TDO
TNA
Bore
Bearing
Types
00
000
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
76.200
3.0000
76.200
3.0000
304.800 +0.025 0.000 +0.025 0.000 +0.013 0.000 +0.013 0.000 +0.008 0.000 +0.008 0.000
12.0000 +0.0010 0.0000 +0.0010 0.0000 +0.0005 0.0000 +0.0005 0.0000 +0.0003 0.0000 +0.0003 0.0000
304.800
12.0000
609.600
24.0000
609.600
24.0000
1219.200
48.0000
+0.013 0.000 +0.013 0.000 +0.013 0.000 +0.013 0.000 +0.008 0.000 +0.008 0.000
+0.0005 0.0000 +0.0005 0.0000 +0.0005 0.0000 +0.0005 0.0000 +0.0003 0.0000 +0.0003 0.0000
+0.127 0.000
+0.0050 0.0000
+0.038 0.000
+0.0015 0.0000
+0.051 0.000
+0.0020 0.0000
+0.076 0.000
+0.0030 0.0000
(1)For TSL bearings these are the normal tolerances of the inner ring bore. However, bore size can be slightly reduced at large end due to tight fit
assembly of the seal on the rib. This should not have any effect on the performance of the bearing.
Table 29. Tapered Roller Bearing Tolerances Outer ring Outside Diameter (Inch)
TS
TSF
TSL
TDI
TDIT
TDO
TNA
TNASW
TNASWE
68
O.D.
Bearing
Types
00
000
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
304.800 +0.025 0.000 +0.025 0.000 +0.013 0.000 +0.013 0.000 +0.008 0.000 +0.008 0.000
12.0000 +0.0010 0.0000 +0.0010 0.0000 +0.0005 0.0000 +0.0005 0.0000 +0.0003 0.0000 +0.0003 0.0000
304.800
12.0000
609.600
24.0000
+0.051 0.000
+0.0020 0.0000
+0.076 0.000
+0.0030 0.0000
+0.127 0.000
+0.0050 0.0000
Table 30. Tapered Roller Bearing Tolerances Outer ring Flange (Inch)
Bearing
Types
TSF
O.D.
00
000
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
304.800 +0.051 0.000 +0.052 0.000 +0.051 0.000 +0.051 0.000 +0.051 0.000 +0.051 0.000
12.0000 +0.0020 0.0000 +0.0020 0.0000 +0.0020 0.0000 +0.0020 0.0000 +0.0020 0.0000 +0.0020 0.0000
304.800
12.0000
609.600 +0.076 0.000 +0.076 0.000 +0.076 0.000 +0.051 0.000 +0.051 0.000 +0.051 0.000
24.0000 +0.0030 0.0000 +0.0030 0.0000 +0.0030 0.0000 +0.0020 0.0000 +0.0020 0.0000 +0.0020 0.0000
609.600
24.0000
914.400
36.0000
+0.127 0.000
+0.0050 0.0000
+0.127 0.000
+0.0050 0.0000
Table 31. Tapered Roller Bearing Tolerances Inner ring Width (Inch)
Bearing
Types
TS
TSF
TSL
2S
TDI
TDIT
TDO
Bore
00
000
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
All Sizes
+0.076 -0.254 +0.076 -0.254 +0.076 -0.254 +0.076 -0.254 +0.076 -0.254 +0.076 -0.254
+0.0030 -0.0100 +0.0030 -0.0100 +0.0030 -0.0100 +0.0030 -0.0100 +0.0030 -0.0100 +0.0030 -0.0100
Table 32. Tapered Roller Bearing Tolerances Outer ring width (Inch)
Bearing
Types
All
Types
O.D.
00
000
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
All Sizes
+0.051 -0.254 +0.051 -0.254 +0.051 -0.254 +0.051 -0.254 +0.051 -0.254 +0.051 -0.254
+0.0020 -0.0100 +0.0020 -0.0100 +0.0020 -0.0100 +0.0020 -0.0100 +0.0020 -0.0100 +0.0020 -0.0100
69
Table 33. Tapered Roller Bearing Tolerances Inner ring Stand (Inch)
Bearing
Types
Bore
00
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
(2)
(2)
(2)
(2)
(2)
(2)
TS
TSF
TSL
2S
TDI(1)
TDIT(1)
TDO
000
Over
406.400
16.0000
(2)
(2)
(2)
(2)
(2)
(1)For class 2, TDI and TDIT bearings with an inner ring bore of 101.600 to 304.800 mm (4.0000 to 12.0000 in.), the inner ring stand is 0.102 mm
(0.0040 in.).
Table 34. Tapered Roller Bearing Tolerances Outer ring Stand (Inch)
Bearing
Types
Bore
00
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
(2)
(2)
(2)
(2)
TS
TSF(1) 266.700 304.800 +0.203
TSL 10.5000 12.0000 +0.0080
TDI
TDIT 304.800 406.400 +0.203
12.0000 16.0000 +0.0080
406.400
16.0000
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(1)Stand for flanged outer ring is measured from flange backface (seating face).
70
000
Over
TS
TSF
TSL
2S
TDI
TDIT
TDO
TNA
TNASW
TNASWE
O.D.
Over
Incl.
00
000
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
266.700
10.5000
0.051
0.0020
0.038
0.0015
0.008
0.0003
0.004
0.00015
0.002
0.000075
0.001
0.000040
266.700
10.5000
304.800
12.0000
0.051
0.0020
0.038
0.0015
0.008
0.0003
0.004
0.00015
0.002
0.000075
0.001
0.000040
304.800
12.0000
609.600
24.0000
0.051
0.0020
0.038
0.0015
0.018
0.0007
609.600
24.0000
914.400
36.0000
0.076
0.0030
0.051
0.0020
0.051
0.0020
914.400
36.0000
0.076
0.0030
0.076
0.0030
71
Table 36. Tapered Roller Bearing tolerances Overall Bearing Width (Inch)
Bearing
Types
Bore
O.D.
00
000
Over
Incl.
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
101.600
4.0000
+0.203
+0.0080
0.000
0.0000
+0.203
+0.0080
0.000
0.0000
+0.203
+0.0080
-0.203
-0.0080
+0.203
+0.0080
-0.203
-0.0080
+0.203
+0.0080
-0.203
-0.0080
+0.203
+0.0080
-0.203
-0.0080
101.600 304.800
4.0000 12.0000
+0.356
+0.0140
-0.254
-0.0100
+0.203
+0.0080
0.000
0.0000
+0.203
+0.0080
-0.203
-0.0080
+0.203
+0.0080
-0.203
-0.0080
+0.203
+0.0080
-0.203
-0.0080
+0.203
+0.0080
-0.203
-0.0080
304.800 609.600
12.0000 24.0000
0.000
0.0000
508.000
20.0000
+0.381
+0.0150
-0.381
-0.0150
+0.203
+0.0080
-0.203
-0.0080
304.800 609.600
12.0000 24.0000
508.000
20.0000
+0.381
+0.0150
-0.381
-0.0150
+0.381
+0.0150
-0.381
-0.0150
+0.381
+0.0150
-0.381
-0.0150
+0.381
+0.0150
-0.381
-0.0150
0.000 127.000
0.0000 5.0000
TNA
TNASW
TNASWE 127.000
5.0000
+0.254
+0.0100
0.000
0.0000
+0.254
+0.0100
0.000
0.0000
+0.762
+0.0300
0.000
0.0000
+0.762
+0.0300
0.000
0.0000
0.000
0.0000
101.600
4.0000
+0.406
+0.0160
0.000
0.0000
+0.406
+0.0160
0.000
0.0000
+0.406
+0.0160
-0.406
-0.0160
+0.406
+0.0160
-0.406
-0.0160
+0.406
+0.0160
-0.406
-0.0160
+0.406
+0.0160
-0.406
-0.0160
101.600 304.800
4.0000 12.0000
+0.711
+0.0280
-0.508
-0.0200
+0.406
+0.0160
-0.203
-0.0080
+0.406
+0.0160
-0.406
-0.0160
+0.406
+0.0160
-0.406
-0.0160
+0.406
+0.0160
-0.406
-0.0160
+0.406
+0.0160
-0.406
-0.0160
304.800 609.600
12.0000 24.0000
0.000
0.0000
508.000
20.0000
+0.762
+0.0300
-0.762
-0.0300
+0.406
+0.0160
-0.406
-0.0160
304.800 609.600
12.0000 24.0000
508.000
20.0000
+0.762
+0.0300
-0.762
-0.0300
+0.762
+0.0300
-0.762
-0.0300
TS
TSF(1)
TSL
609.600
24.0000
TDI
TDIT
TDO
2S
609.600
24.0000
+0.762
+0.0300
-0.762
-0.0300
+0.762
+0.0300
-0.762
-0.0300
0.000
0.0000
101.600
4.0000
+0.457
+0.0180
-0.051
-0.0020
+0.457
+0.0180
-0.051
-0.0020
(1)For bearing type TSF, the tolerance applies to the dimension T1. Refer to the Tapered Roller Bearing Catalog available on www.timken.com.
72
Bearing Class
Precision
2
Range
Precision
3
Bore
Deviation
Range
Precision
4
Over
Incl.
Over
Incl.
Max.
Min.
Over
Incl.
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
304.800
12.0000
+0.025
+0.0010
0.000
0.0000
+0.013
+0.0005
0.000
0.0000
0.000
0.0000
25.400
1.0000
+0.076
+0.0030
-0.076
-0.0030
304.800
12.0000
609.600
24.0000
+0.051
0.0020
0.000
0.0000
+0.025
+0.0010
0.000
0.0000
25.400
1.0000
76.200
3.0000
+0.102
+0.0040
-0.102
-0.0040
609.600
24.0000
914.400
36.0000
+0.076
+0.0030
0.000
0.0000
+0.038
+0.0015
0.000
0.0000
76.200
3.0000
+0.127
+0.0050
-0.127
-0.0050
914.400
36.0000
1219.200
48.0000
+0.102
+0.0040
0.000
0.0000
+0.051
0.0020
0.000
0.0000
1219.200
48.0000
+0.127
+0.0050
0.000
0.0000
+0.076
+0.030
0.000
0.0000
TTC, TTSP
Table 38. Thrust Tapered Roller Bearing Tolerances outside diameter (Inch)
TTHD, TTHDFL, TTVS
Outside Diameter
Bearing Class
Precision
2
Range
Deviation
Range
Precision
4
Precision
3
Over
Incl.
Over
Incl.
Max.
Min.
Over
Incl.
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
304.800
12.0000
+0.025
+0.0010
0.000
0.0000
+0.013
+0.0005
0.000
0.0000
0.000
0.0000
127.000
5.0000
+0.254
+0.0100
0.000
0.0000
304.800
12.0000
609.600
24.0000
+0.051
0.0020
0.000
0.0000
+0.025
+0.0010
0.000
0.0000
127.000
5.0000
203.200
8.0000
+0.381
+0.0150
0.000
0.0000
609.600
24.0000
914.400
36.0000
+0.076
+0.0030
0.000
0.0000
+0.038
+0.0015
0.000
0.0000
203.200
8.0000
+0508
+0.200
0.000
0.0000
TTC, TTSP
Bearing Class
Precision
2
Range
Width
Deviation
Range
Precision
4
Over
Incl.
Over
Incl.
Max.
Min.
Over
Incl.
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
+0.381
+0.0150
-0.381
-0.0150
+0.203
+0.0080
-0.203
-0.0080
0.000
0.0000
76.200
3.0000
+0.254
+0.0100
-0.254
-0.0100
76.200
3.0000
127.000
5.0000
+0.381
+0.0150
-0.381
-0.0150
127.000
5.0000
+0508
+0.200
-0.508
-0.0200
All Sizes
TTC, TTSP
73
Mounting
All bearing types are typically mounted onto a shaft and into a
housing wherein the shaft and housing have shoulders to back
the rings. The purpose of the shoulder is to positively establish
the axial location and alignment of the bearing under all operating
conditions. Various types of backing shoulder designs can be
used as shown in fig. 77. The conventional method uses a shoulder
machined on a shaft or in the housing. In some applications,
snap rings are used as the shoulder. For either solid shoulder
or snap ring designs, spacers can be used between the bearing
raceway and shoulder if necessary. It is essential that a shoulder
be square with the bearing ring and of sufficient diameter to
provide adequate backing of the bearing raceway. It also must be
Spacer
Spacer
Spacer
Spacer
Spacer
Snap
Snap
ringring
Snap
ring
Snap ring
Snap
ring
Conventional
Fig. 77. Backing designs.
Warning
74
Splitspacer
spacer
Split
Fitting Practice
As a general guideline, bearing rings mounted on a rotating
member should have an interference fit. Loose fits may permit the
ring to creep or turn and wear the mating surface and backing
shoulder. This wear can result in excessive bearing looseness
and damage to the bearing, shaft or housing.
Shaft
O.D.
Tolerance
Range
h6 h5
r6 r7
p6
k5 k6
j5 j6
m5 m6
Nominal Bearing Bore
Bore Tolerance
g6
Loose Fit Range
F7
Housing
Bore
Tolerance
Range
G7 H8
H7
H6
J7 J6
K6 K7
O.D. Tolerance
M6 M7
N6 N7
P6 P7
75
Setting
Installation
Adequate tools must be used to properly fit the inner rings onto
the shaft and outer rings into the housing to avoid damage. Direct
shock on the rings must be avoided.
Most applications require a tight interference fit of one or both
rings. It is acceptable to heat or cool rings to ease assembly.
Standard bearings should not be heated above 120 C
(250 F) or cooled below -55 C (-65 F). Precision bearings
should not be heated above 65 C (150 F) or cooled below
-30 C (-20 F).
An alternate method of mounting, generally used on smaller
sizes, is to press the bearing onto the shaft or into the housing
using an arbor press.
For more information on these installation procedures, please
contact your Timken engineer.
Specific mounting design, fitting practice, setting and installation
recommendations are summarized in the following pages for
tapered roller, cylindrical roller, spherical roller, radial ball and
angular contact ball bearings.
76
Fitting Practice
Effective bearing
spread
Outer-ring
follower
Indirect mounting
Outer-ring
carrier
Cup follower
Carrier
Fig. 80. Bearing setting
devices - direct
mounting.
Effective bearing
spread
Direct mounting
Fig. 79. Comparison of mounting stability between indirect and
direct mountings.
Locknuts
Locknuts
Locknutwith
with
Locknut
tonguedwasher
washer
tongued
Stake-nut
Stakenut
End
End plate
plate
Stake-nut
Locknut with
tongued washer
77
Certain table fits may not be adequate for light shaft and housing
sections, shafts other than steel, nonferrous housings, critical
operation conditions such as high speed, unusual thermal or
loading conditions or a combination thereof. Also, assembly
procedures and the means and ease of obtaining the bearing
setting may require special fits. In these cases, experience
should be used as a guideline or your Timken engineer should
be consulted for review and suggestions.
Rotating inner rings generally should be applied with an
interference fit. In special cases, loose fits may be considered
if it has been determined by test or experience they will perform
satisfactorily. The term rotating inner ring describes a condition
in which the inner ring rotates relative to the load. This may occur
with a rotating inner ring under a stationary load or a stationary
inner ring with a rotating load. Loose fits will permit the inner
rings to creep and wear the shaft and the backing shoulder. This
may result in excessive bearing looseness and possible bearing
and shaft damage.
Stationary inner ring fitting practice depends on the application.
Under conditions of high speed, heavy loads or shock, interference
fits using heavy-duty fitting practices should be used. With inner
rings mounted on unground shafts subjected to moderate loads
(no shock) and moderate speeds, a metal-to-metal or near zero
average fit is used. In sheave and wheel applications using
unground shafts, or in cases using ground shafts with moderate
loads (no shock), a minimum fit near zero to a maximum looseness
that varies with the inner ring bore size is suggested. In stationary
inner ring applications requiring hardened and ground spindles,
a slightly looser fit may be satisfactory. Special fits also may
be necessary on installations such as multiple sheave crane
blocks.
78
( )( )
K
d
= 0.5
0.39 do
( )( )
K
Do
0.39 D
{ }
[
]
{ ] }
( )[ ( )]
( ) ]
d
dsi
( )
do d
K
Double-row and four-row bearings that are provided with
= 0.5
S
0.39
dsi 2
spacers are examples of matched assemblies. These bearings
1do
are pre-set to a specific bench endplay or axial clearance prior to
installation into the application. Mounting the bearing with a tight
Outer ring setting reduction/width increase:
fit will reduce this bench endplay. In order to meet the desired
Do D 2
1mounted setting, the bench endplay must be compensated for
K D DH
the fit effect.
= 0.5
H
0.39
Do 2
1
Set-Right assemblies rely on the control of bearing, shaft and
DH
housing tolerances to known distributions, resulting in a statistical
mounted bearing setting range. This mounted setting takes into
For shaft or housing material other than steel, consult your
account any reductions in setting due to tight fits.
Timken engineer.
( )
( )
( )
( )
do
d si
Do D
Parameters for
calculation of fit
effect on setting.
79
Setting
Setting is defined as the axial clearance between roller and
raceway. Establishing the setting at the time of assembly is an
inherent advantage of tapered roller bearings. They can be set
to provide optimum performance in almost any application. Fig.
83 gives an example of the relationship between fatigue life
and bearing setting. Unlike some types of anti-friction bearings,
tapered roller bearings do not rely strictly on housing or shaft fits
to obtain a certain bearing setting. One ring can be moved axially
relative to the other to obtain the desired bearing setting.
100
0.05
0.10
0.15 mm
0.0020 0.0040 0.0060 in
Axial clearance
360 180
216
135
Preload Endplay
0
100
1. Standard mounting
2. Pre-set assemblies
Axial Endplay
80
Fit effect(1)
Solid shaft/heavy section housing
= 0.5
( )( )
K
0.39
d
do
( )( )
K
0.39
Do
= 0.5
( )( )
K
0.39
do
1 1 -
( )
( )
dsi
d
dsi
do
DH
do
d si
Do D
= 0.5
(1)These
( )( )
K
Do
0.39
( )
( )
D
DH
1 - Do
DH
1 -
2
2
Temperature effect
Setting methods
T
= aTDT
[( )( ) ( )( ) [
K1
Do1
0.39
K2
Do2
0.39
+L
T
= aTDT
[( )( ) ( )( ) [
K1
Do1
0.39
K2
Do2
0.39
-L
Direct mounting
Indirect mounting
Direct mounting
Indirect mounting
Application type.
Duty cycle/loading.
Operational features of adjacent mechanical drive
elements.
81
Effective bearing
spread
Fitting Practice
Tables 55-66 on pages 124-129 list the recommended fitting
practices for spherical roller and cylindrical roller bearings. The
tables assume:
Float position
Float position
Fixed position
Fixed position
82
Effective bearing
spread
Direct mounting
Fig. 88 shows a pulverizer wheel assembly where a doublerow spherical roller bearing is mounted in combination with a
cylindrical roller bearing. In this application, the cylindrical roller
bearing allows the shaft to float relative to the housing.
Fitting practice
Interference fits between the outer ring and steel or cast iron
housing will reduce radial clearance by approximately 60
percent.
Thermal gradients
Note
It is critical to select the RIC that allows for this reduction.
For help selecting the correct radial internal clearance for your
application, consult with your Timken engineer.
Fig. 90. Spherical roller
bearing mounted with
an adapter sleeve.
Setting
83
Table 40. Radial Internal Clearance Limits spherical Roller Bearings cylindrical bore
Cylindrical Bore
Normal
CO
Bore
(Nominal)
Min.
C4
Max.
C2
Over
Min.
Max.
C3
C5
Incl.
Min.
Max.
Min.
Max.
Min.
Max.
mm
mm
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
24
30
0.015
0.0006
0.025
0.001
0.04
0.0016
0.055
0.0022
0.075
0.003
0.095
0.0037
30
40
0.015
0.0006
0.03
0.0012
0.045
0.0018
0.06
0.0024
0.08
0.0031
1
0.0039
40
50
0.02
0.0008
0.035
0.0014
0.055
0.0022
0.075
0.003
0.1
0.0039
0.125
0.0049
50
65
0.02
0.0008
0.04
0.0016
0.065
0.0026
0.09
0.0035
0.12
0.0047
0.15
0.0059
65
80
0.03
0.0012
0.05
0.002
0.08
0.0031
0.11
0.0043
0.145
0.0057
0.18
0.0071
80
100
0.035
0.0014
0.06
0.0024
0.1
0.0039
0.135
0.0053
0.18
0.0071
0.225
0.0089
100
120
0.04
0.0016
0.075
0.003
0.12
0.0047
0.16
0.0063
0.21
0.0083
0.26
0.0102
120
140
0.05
0.002
0.095
0.0037
0.145
0.0057
0.19
0.0075
0.24
0.0094
0.3
0.0118
140
160
0.06
0.0024
0.11
0.0043
0.17
0.0067
0.22
0.0087
0.28
0.011
0.35
0.0138
160
180
0.065
0.0026
0.12
0.0047
0.18
0.0071
0.24
0.0094
0.31
0.0122
0.39
0.0154
180
200
0.07
0.0028
0.13
0.0051
0.2
0.0079
0.26
0.0102
0.34
0.0134
0.43
0.0169
200
225
0.08
0.0031
0.14
0.0055
0.22
0.0087
0.29
0.0114
0.38
0.015
0.47
0.0185
225
250
0.09
0.0035
0.15
0.0059
0.24
0.0094
0.32
0.0126
0.42
0.0165
0.52
0.0205
250
280
0.1
0.0039
0.17
0.0067
0.26
0.0102
0.35
0.0138
0.46
0.0181
0.57
0.0224
280
315
0.11
0.0043
0.19
0.0075
0.28
0.011
0.37
0.0146
0.5
0.0197
0.63
0.0248
315
355
0.12
0.0047
0.2
0.0079
0.31
0.0122
0.41
0.0161
0.55
0.0217
0.69
0.0272
355
400
0.13
0.0051
0.22
0.0087
0.34
0.0134
0.45
0.0177
0.6
0.0236
0.75
0.0295
400
450
0.14
0.0055
0.24
0.0094
0.37
0.0146
0.5
0.0197
0.66
0.026
0.82
0.0323
Continued on next page.
84
Continued
from
previous
page.
Table
40.
Radial
Internal Clearance Limits spherical Roller Bearings cylindrical bore
Cylindrical Bore
Normal
CO
Bore
(Nominal)
Min.
C4
Max.
C2
Min.
Max.
C3
C5
Incl.
Min.
Max.
Min.
Max.
Min.
Max.
mm
mm
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
450
500
0.14
0.0055
0.26
0.0102
0.41
0.0161
0.55
0.0217
0.72
0.0283
0.9
0.0354
500
560
0.15
0.0059
0.28
0.011
0.44
0.0173
0.6
0.0236
0.78
0.0307
1
0.0394
560
630
0.17
0.0067
0.31
0.0122
0.48
0.0189
0.65
0.0256
0.85
0.0335
1.1
0.0433
630
710
0.19
0.0075
0.35
0.0138
0.53
0.0209
0.7
0.0276
0.92
0.0362
1.19
0.0469
710
800
0.21
0.0083
0.39
0.0154
0.58
0.0228
0.77
0.0303
1.01
0.0398
1.3
0.0512
800
900
0.23
0.0091
0.43
0.0169
0.65
0.0256
0.86
0.0339
1.12
0.0441
1.44
0.0567
900
1000
0.26
0.0102
0.48
0.0189
0.71
0.028
0.93
0.0366
1.22
0.048
1.57
0.0618
Over
85
Table 41. Radial Internal Clearance Limits spherical Roller Bearings Tapered Bore
Tapered Bore
Normal
CO
Min.
Max.
Bore
(Nominal)
C2
Over
Suggested
Reduction of RIC
Due to
Installation
C4
Min.
Max.
C3
C5
Suggested
RIC After
Installation
1:30 Taper(2)
Incl.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Max.
Min.
Max.
Min.
Min.
mm
mm
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
24
30
0.02
0.0008
0.03
0.0012
0.04
0.0016
0.055
0.0022
0.075
0.003
0.095
0.0037
0.015
0.0006
0.02
0.0008
0.30
0.0118
0.23
0.0091
0.015
0.0006
30
40
0.025
0.001
0.035
0.0014
0.05
0.002
0.065
0.0026
0.085
0.0033
0.105
0.0041
0.02
0.0008
0.025
0.001
0.38
0.0150
0.30
0.0118
0.015
0.0006
40
50
0.03
0.0012
0.045
0.0018
0.06
0.0024
0.08
0.0031
0.1
0.0039
0.13
0.0051
0.025
0.001
0.03
0.0012
0.46
0.0181
0.38
0.0150
0.02
0.0008
50
65
0.04
0.0016
0.055
0.0022
0.075
0.003
0.095
0.0037
0.12
0.0047
0.16
0.0063
0.03
0.0012
0.038
0.0015
0.56
0.0220
0.46
0.0181
0.025
0.001
65
80
0.05
0.002
0.07
0.0028
0.095
0.0037
0.12
0.0047
0.15
0.0059
0.2
0.0079
0.038
0.0015
0.051
0.002
0.76
0.0299
0.56
0.0220
0.025
0.001
80
100
0.055
0.0022
0.08
0.003
0.11
0.0043
0.14
0.0055
0.18
0.0071
0.23
0.0091
0.046
0.0018
0.064
0.0025
0.97
0.0382
0.68
0.0268
0.036
0.0014
100
120
0.065
0.0026
0.1
0.0039
0.135
0.0053
0.17
0.0067
0.22
0.0087
0.28
0.011
0.051
0.002
0.071
0.0028
1.07
0.0421
0.76
0.0299
2.54
0.1000
1.90
0.0748
0.051
0.002
120
140
0.08
0.0031
0.12
0.0047
0.16
0.0063
0.2
0.0079
0.26
0.0102
0.33
0.013
0.064
0.0025
0.089
0.0035
1.27
0.0500
0.89
0.0350
3.05
0.1201
2.29
0.0902
0.056
0.0022
140
160
0.09
0.0035
0.13
0.0051
0.18
0.0071
0.23
0.0091
0.3
0.0118
0.38
0.015
0.076
0.003
0.102
0.004
1.52
0.0598
1.14
0.0449
3.43
0.1350
2.67
0.1051
0.056
0.0022
160
180
0.1
0.0039
0.14
0.0055
0.2
0.0079
0.26
0.0102
0.34
0.0134
0.43
0.0169
0.076
0.003
0.114
0.0045
1.65
0.0650
1.14
0.0449
4.06
0.1598
2.67
0.1051
0.061
0.0024
180
200
0.11
0.0043
0.16
0.0063
0.22
0.0087
0.29
0.0114
0.37
0.0146
0.47
0.0185
0.089
0.0035
0.127
0.005
1.90
0.0748
1.40
0.0551
4.45
0.1752
3.05
0.1201
0.071
0.0028
200
225
0.12
0.0047
0.18
0.0071
0.25
0.0098
0.32
0.0126
0.41
0.0161
0.52
0.0205
0.102
0.004
0.14
0.0055
2.03
0.0799
1.52
0.0598
4.83
0.1902
3.56
0.1402
0.076
0.003
225
250
0.14
0.0055
0.2
0.0079
0.27
0.0106
0.35
0.0138
0.45
0.0177
0.57
0.0224
0.114
0.0045
0.152
0.006
2.29
0.0902
1.78
0.0701
5.33
0.2098
4.06
0.1598
0.089
0.0035
250
280
0.15
0.0059
0.22
0.0087
0.3
0.0118
0.39
0.0154
0.49
0.0193
0.62
0.0244
0.114
0.0045
0.165
0.0065
2.54
0.1000
1.78
0.0701
5.84
0.2299
4.06
0.1598
0.102
0.004
280
315
0.17
0.0067
0.24
0.0094
0.33
0.013
0.43
0.0169
0.54
0.0213
0.68
0.0268
0.127
0.005
0.178
0.007
2.67
0.1051
1.90
0.0748
6.22
0.2449
4.45
0.1752
0.102
0.004
315
355
0.19
0.0075
0.27
0.0106
0.36
0.0142
0.47
0.0185
0.59
0.0232
0.74
0.0291
0.14
0.0055
0.19
0.0075
2.79
0.1098
2.03
0.0799
6.60
0.2598
4.83
0.1902
0.114
0.0045
355
400
0.21
0.0083
0.3
0.0118
0.4
0.0157
0.52
0.0205
0.65
0.0256
0.82
0.0323
0.152
0.006
0.203
0.008
3.05
0.1201
2.29
0.0902
7.11
0.2799
5.33
0.2098
0.127
0.005
400
450
0.23
0.0091
0.33
0.013
0.44
0.0173
0.57
0.0224
0.72
0.0283
0.91
0.0358
0.165
0.0065
0.216
0.0085
3.3
0.1299
2.54
0.1000
7.62
0.3000
5.84
0.2299
0.152
0.006
Note: Axial displacement values apply to solid-steel shafts or hollow shafts with bore diameter less than half the shaft diameter.
For shaft materials other than steel, or for thin-walled shafts, please consult your Timken engineer
(1)This displacement is valid for assembly of tapered bore bearings and is measured starting from a line-to-line fit of the bearing
bore to the tapered shaft.
(2)1:12 Taper used for 222, 223, 230, 231, 232, 233, 239 series. 1:30 Taper used for 240, 241, 242 series. For sleeve mounting, multiply
axial displacement values by 1.1 for 1:12 Taper or by 1.05 for 1:30 Taper. For questions on tapered shaft data, consult your
Timken engineer.
86
Tapered Bore
Normal
CO
Min.
Max.
Bore
(Nominal)
C2
Over
Suggested
Reduction of RIC
Due to
Installation
C4
Min.
Max.
C3
C5
Suggested
RIC After
Installation
1:30 Taper(2)
Incl.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Max.
Min.
Max.
Min.
Min.
mm
mm
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
450
500
0.26
0.0102
0.37
0.0146
0.49
0.0193
0.63
0.0248
0.79
0.0311
1
0.0394
0.178
0.007
0.229
0.009
3.43
0.1350
2.67
0.1051
8.00
0.3150
6.22
0.2449
0.165
0.0065
500
560
0.29
0.0114
0.41
0.0161
0.54
0.0213
0.68
0.0268
0.87
0.0343
1.1
0.0433
0.203
0.008
0.254
0.01
3.81
0.1500
3.05
0.1201
8.89
0.3500
7.11
0.2799
0.178
0.007
560
630
0.32
0.0126
0.46
0.0181
0.6
0.0236
0.76
0.0299
0.98
0.0386
1.23
0.0484
0.229
0.009
0.279
0.011
4.19
0.1650
3.43
0.1350
9.78
0.3850
8.00
0.3150
0.203
0.008
630
710
0.35
0.0138
0.51
0.0201
0.67
0.0264
0.85
0.0335
1.09
0.0429
1.36
0.0535
0.254
0.01
0.305
0.012
4.57
0.1799
3.81
0.1500
10.67
0.4201
8.89
0.3500
0.203
0.008
710
800
0.39
0.0154
0.57
0.0224
0.75
0.0295
0.96
0.0378
1.22
0.048
1.5
0.0591
0.279
0.011
0.356
0.014
5.33
0.2098
4.19
0.1650
12.45
0.4902
9.78
0.3850
0.229
0.009
800
900
0.44
0.0173
0.64
0.0252
0.84
0.0331
1.07
0.0421
1.37
0.0539
1.69
0.0665
0.305
0.012
0.381
0.015
5.72
0.2252
4.57
0.1799
13.33
0.5248
10.67
0.4201
0.252
0.01
900
1000
0.49
0.0193
0.71
0.028
0.93
0.0366
1.19
0.0469
1.52
0.0598
1.86
0.0732
0.356
0.014
0.432
0.017
6.48
0.2551
5.33
0.2100
15.11
0.5949
12.45
0.4902
0.279
0.011
Note: Axial displacement values apply to solid-steel shafts or hollow shafts with bore diameter less than half the shaft diameter.
For shaft materials other than steel, or for thin-walled shafts, please consult your Timken engineer
(1)This displacement is valid for assembly of tapered bore bearings and is measured starting from a line-to-line fit of the bearing
bore to the tapered shaft.
(2)1:12 Taper used for 222, 223, 230, 231, 232, 233, 239 series. 1:30 Taper used for 240, 241, 242 series. For sleeve mounting, multiply
axial displacement values by 1.1 for 1:12 Taper or by 1.05 for 1:30 Taper. For questions on tapered shaft data, consult your
Timken engineer.
87
Table 42. Radial Internal Clearance limits Cylindrical roller bearings Cylindrical Bore
Bore RIC
Bore (Nominal)
88
C2
C0
C3
C4
C5
Over
Incl.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
10
0.3937
0.000
0.0000
0.025
0.0010
0.020
0.0008
0.0045
0.0018
0.035
0.0014
0.060
0.0024
0.050
0.0020
0.075
0.0030
10
0.3937
24
0.9449
0.000
0.0000
0.025
0.0010
0.020
0.0008
0.0045
0.0018
0.035
0.0014
0.060
0.0024
0.050
0.0020
0.075
0.0030
0.065
0.0026
0.090
0.0035
24
0.9449
30
1.1811
0.000
0.0000
0.025
0.0010
0.020
0.0008
0.0045
0.0018
0.035
0.0014
0.060
0.0024
0.050
0.0020
0.075
0.0030
0.070
0.0028
0.095
0.0037
30
1.1811
40
1.5748
0.005
0.0002
0.030
0.0012
0.025
0.0010
0.050
0.0020
0.0045
0.0018
0.070
0.0028
0.060
0.0024
0.085
0.0033
0.080
0.0031
0.105
0.0041
40
1.5748
50
1.9685
0.005
0.0002
0.035
0.0014
0.030
0.0012
0.060
0.0024
0.050
0.0020
0.080
0.0031
0.070
0.0028
0.100
0.0039
0.095
0.0037
0.125
0.0049
50
1.9685
65
2.5591
0.010
0.0004
0.040
0.0016
0.040
0.0016
0.070
0.0028
0.060
0.0024
0.090
0.0035
0.080
0.0031
0.110
0.0043
0.110
0.0043
0.140
0.0055
65
2.5591
80
3.1496
0.010
0.0004
0.0045
0.0018
0.040
0.0016
0.075
0.0030
0.065
0.0026
0.100
0.0039
0.090
0.0035
0.125
0.0049
0.130
0.0051
0.165
0.0065
80
3.1496
100
3.9370
0.015
0.0006
0.050
0.0020
0.050
0.0020
0.085
0.0033
0.075
0.0030
0.110
0.0043
0.105
0.0041
0.140
0.0055
0.155
0.0061
0.190
0.0075
100
3.9370
120
4.7244
0.015
0.0006
0.055
0.0022
0.050
0.0020
0.090
0.0035
0.085
0.0033
0.125
0.0049
0.125
0.0049
0.165
0.0065
0.180
0.0071
0.220
0.0087
120
4.7244
140
5.5118
0.015
0.0006
0.060
0.0024
0.060
0.0024
0.105
0.0041
0.100
0.0039
0.145
0.0057
0.145
0.0057
0.190
0.0075
0.200
0.0079
0.245
0.0096
140
5.5118
160
6.2992
0.020
0.0008
0.070
0.0028
0.070
0.0028
0.120
0.0047
0.115
0.0045
0.165
0.0065
0.165
0.0065
0.215
0.0085
0.225
0.0089
0.275
0.0108
160
6.2992
180
7.0866
0.025
0.0010
0.075
0.0030
0.075
0.0030
0.125
0.0049
0.120
0.0047
0.170
0.0067
0.170
0.0067
0.220
0.0087
0.250
0.0098
0.300
0.0118
180
7.0866
200
7.8740
0.035
0.0014
0.090
0.0035
0.090
0.0035
0.145
0.0057
0.140
0.0055
0.195
0.0077
0.195
0.0077
0.250
0.0098
0.275
0.0108
0.330
0.0130
200
7.8740
225
8.8583
0.045
0.0018
0.105
0.0041
0.105
0.0041
0.165
0.0065
0.160
0.0063
0.220
0.0087
0.220
0.0087
0.280
0.0110
0.305
0.0120
0.365
0.0144
225
8.8583
250
9.8425
0.045
0.0018
0.110
0.0043
0.110
0.0043
0.175
0.0069
0.170
0.0067
0.235
0.0093
0.235
0.0093
0.300
0.0118
0.330
0.0130
0.395
0.0156
250
9.8425
280
11.0236
0.055
0.0022
0.125
0.0049
0.125
0.0049
0.195
0.0077
0.190
0.0075
0.260
0.0102
0.260
0.0102
0.330
0.0130
0.370
0.0146
0.440
0.0173
280
11.0236
315
12.4016
0.055
0.0022
0.130
0.0051
0.130
0.0051
0.205
0.0081
0.200
0.0079
0.275
0.0108
0.275
0.0108
0.350
0.0138
0.410
0.0161
0.485
0.0191
315
12.4016
355
13.9764
0.065
0.0026
0.145
0.0057
0.145
0.0057
0.225
0.0089
0.225
0.0089
0.305
0.0120
0.305
0.0120
0.385
0.0152
0.455
0.0179
0.535
0.0211
355
13.9764
400
15.7480
0.100
0.0039
0.190
0.0075
0.190
0.0075
0.280
0.0110
0.280
0.0110
0.370
0.0146
0.370
0.0146
0.460
0.0181
0.510
0.0201
0.600
0.0236
400
15.7480
450
17.7165
0.110
0.0043
0.210
0.0083
0.210
0.0083
0.310
0.0122
0.310
0.0122
0.410
0.0161
0.410
0.0161
0.510
0.0201
0.565
0.0222
0.665
0.0262
450
17.7165
500
19.6850
0.110
0.0043
0.220
0.0087
0.220
0.0087
0.330
0.0130
0.330
0.0130
0.440
0.0173
0.440
0.0173
0.550
0.0217
0.625
0.0246
0.735
0.0289
500
19.6850
560
22.0472
0.120
0.0047
0.240
0.0095
0.240
0.0095
0.360
0.0142
0.360
0.0142
0.480
0.0189
0.480
0.0189
0.600
0.0236
0.690
0.0272
0.810
0.0319
560
22.0472
630
24.8031
0.140
0.0055
0.260
0.0102
0.260
0.0102
0.380
0.0150
0.380
0.0150
0.500
0.0197
0.500
0.0197
0.620
0.0244
0.780
0.0307
0.900
0.0354
630
24.8031
710
27.9528
0.145
0.0057
0.285
0.0112
0.285
0.0112
0.425
0.0167
0.425
0.0167
0.565
0.0222
0.565
0.0222
0.705
0.0278
0.865
0.0341
1.005
0.0396
710
27.9528
800
31.4961
0.150
0.0059
0.310
0.0122
0.310
0.0122
0.470
0.0185
0.470
0.0185
0.630
0.0248
0.630
0.0248
0.790
0.0311
0.975
0.0384
1.135
0.0447
800
31.4961
900
35.4331
0.180
0.0071
0.350
0.0138
0.350
0.0138
0.520
0.0205
0.520
0.0205
0.690
0.0272
0.690
0.0272
0.860
0.0339
1.095
0.0431
1.265
0.0498
900
35.4331
1000
39.3701
0.200
0.0079
0.390
0.0154
0.390
0.0154
0.580
0.0228
0.580
0.0228
0.770
0.0303
0.770
0.0303
0.960
0.0378
1.215
0.0478
1.405
0.0553
EXAMPLE #1
Calculating RIC Reduction Using a Spherical Roller Bearing with Tapered Bore
Given bearing number 22328K C3 (140 mm bore with C3 clearance)
is to be mounted on a tapered shaft. Using a set of feeler gauges,
RIC is measured at:
RIC = 0.178 mm (0.007 in.)
or
For this example, the value of 0.076 mm (0.003 in.) was obtained by taking the midrange value of the upper and lower limits found in the tables on pages 86-88.
EXAMPLE #2
Calculating RIC Reduction Using a Spherical Roller Bearing with Cylindrical Bore
Observations:
We can use the nominal fit charts on page 124 (shaft fit) and 125
(housing fit) to help guide our ISO fit selection.
From the shaft fit chart at 150 mm nominal bore at p6 (page 136),
the shaft tolerance is nominal +0.043 to +0.068 mm (+0.0017
to +0.0027 in.). Therefore, we have the following bore range:
From the housing fit chart at 270 mm nominal O.D. at H8 (page 139),
the housing bore tolerance is nominal +0.000 to +0.081 mm (+0.0000 in.,
+0.0032 in.). Therefore, we have the following bore range:
max. fit
max. fit
min. fit
min. fit
89
EXAMPLE #2 continued
For the primary selection of RIC, the major parameters are the
bearing speed and the fits. For our example, we know that the
shaft fit is 0.043 mm (0.0017 in.) tight to 0.093 mm (0.0037 in.) tight.
We know the housing fit is 0 mm to 0.116 mm (0.0046 in.) loose.
We also know that the bearing speed is 1200 RPM or 60 percent
of the speed rating.
As a general rule of thumb, we increase the the clearance for
operating speeds that exceed 70 percent of the speed rating, due
to concerns over internal heat generation and thermal growth.
In this case, we are at 60 percent of the speed rating, so normal
clearance, ISO C0 or Co, can be selected.
Observing the RIC chart on page 84, we find for 150 mm nominal
bore at Co, the RIC will be 0.110 mm to 0.170 mm (0.0043 in. to 0.0067
in.). We also note that the minimum recommended RIC (installed)
is 0.056 mm (0.0022 in.).
Also from page 83, we note that we get an approximate reduction
of RIC that is 80 percent of interference fit on a solid shaft and 60
percent of the O.D. interference fit in a steel or cast iron housing.
Since we have a loose housing fit, there will be no RIC reduction
from that fit.
90
min. clearance
Installation
When using a tight-fit inner ring, the method of assembly will depend
on whether the bearing has a cylindrical or tapered bore.
The oil bath is shown in fig. 93. The bearing should not be in
direct contact with the heat source.
BEARING
BEARING HELD
FROM BOTTOM
BY SCREEN
Trial runs with the unit and bearing are usually necessary to
obtain proper timing.
OIL
BEARING SUPPORT
BLOCK
FLAME BURNER
Note
Never use steam or hot water when cleaning the bearings
because these methods can create rust or corrosion.
Note
Never expose any surface of a bearing to the flame of a torch.
Note
CAUTION
91
The O.D. of the tube should not exceed the shaft backing
diameter given in the Timken Spherical Roller Bearing
Catalog (order no. 10446), found on www.timken.com.
Place thumbs on the inner ring bore and oscillate the inner
ring the distance of two or three roller spacings.
Move the feeler gage carefully along the top roller between
the roller and outer ring raceway. Repeat this procedure
using thicker feeler gage blades until one is found that will
not go through.
If the outer ring is being pressed into the housing, the O.D.
Coat the shaft with a light machine oil to reduce the force
Note
Never attempt a press fit on a shaft by applying pressure
to the outer ring or a press fit in a housing by applying
pressure to the inner ring.
92
Contact angle
Combined load
Axial or
thrust load
+T
Bearing
A
Bearing
B
93
DB
Marked faces
of outer rings
together.
Clearance
between
inner-ring faces.
DF
Unmarked faces
of outer rings
together.
Inner-ring faces
clamped together.
These inner- and
outer-ring faces
are flush.
Clearance
between
outer-ring faces.
Inner- and
outer-ring faces
clamped together.
Faces flush
on both sides.
Before mounting
Mounting
Before
Mounted
Mounted
Before
mounting
Before
Mounting
Mounted
Mounted
94
Tandem mounting, DT
Other mountings
DT
One marked and
one unmarked
outer-ring face
together.
Inner- and
outer-ring faces
not flush
on either side.
Under axial
load equivalent to
twice the normal
preload. Innerand outer-ring
faces are flush
on both sides.
TU
TU
QU
QU
Before Mounting
Before
mounting
Mounted
Mounted
95
Setting
Timken has established standard preload levels that are
considered proper for most duplex bearing applications. Special
preloads also can be provided to satisfy extreme requirements.
For example, a heavily loaded, slow-speed rotating shaft may
require heavier-than-normal preload in order to minimize
deflection. Although heavy preload provides slightly greater
rigidity, it reduces bearing life and increases power consumption;
therefore, preload levels should be chosen with care.
The axial deflection of a bearing subject to thrust loading is based
on Hertzs theories for elastic bodies in contact. The general
expression is:
Fa2 1/3
=K
Zd2
( )
Deflection
Fitting Practice
B2
B1
C1
Fa1
Fa2
Load, Fa
+T
Bearing
A
96
C2
Bearing
B
Standard Class
ISO
P0
P6
Precision Class
P5
P4
P2
ABMA
ABEC 1
ABEC 3
ABEC 5
ABEC 7
ABEC 9
Mounting
Hs
Fixed mounting
Fig. 105.
Floating mounting
S
Shaft
Shoulder
Hs
Housing
Shoulder
0.25 mm
.010 in.
0.25 mm
.010 in.
mm
in.
mm
in.
9301K
14.7
0.58
21.6
0.85
9302K
17.8
0.70
25.4
1.00
9303K
19.8
0.78
27.4
1.08
9304K
23.9
0.94
33.5
1.32
9305K
29.0
1.14
38.6
1.52
9306K
33.5
1.32
43.4
1.71
9307K
39.6
1.56
50.8
2.00
9308K
45.0
1.77
57.4
2.26
9309K
50.3
1.98
63.2
2.49
9310K
54.9
2.16
67.6
2.66
9311K
61.0
2.40
74.7
2.94
9312K
65.8
2.59
79.8
3.14
Basic
Bearing
Number
97
Fig. 106.
98
Hs
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
33K3
5.1
0.20
4.8
0.19
8.1
0.32
7.9
0.31
33K4
6.1
0.24
5.8
0.23
11.2
0.44
10.9
0.43
33K5
6.6
0.26
6.4
0.25
11.2
0.44
10.9
0.43
34K
6.6
0.26
6.4
0.25
14.2
0.56
14.0
0.55
35K
9.4
0.37
9.1
0.36
17.0
0.67
16.8
0.66
36K
9.4
0.37
9.1
0.36
17.0
0.67
16.8
0.66
37K
11.2
0.44
10.7
0.42
20.1
0.79
19.6
0.77
38K
11.4
0.45
10.9
0.43
20.1
0.79
19.6
0.77
38KV
11.4
0.45
10.9
0.43
20.1
0.79
19.6
0.77
39K
13.0
0.51
12.5
0.49
23.1
0.91
22.6
0.89
S1K7
8.6
0.34
8.1
0.32
14.2
0.56
13.7
0.54
S1K
9.4
0.37
8.9
0.35
17.5
0.69
17.0
0.67
S3K
12.7
0.50
12.2
0.48
20.3
0.80
19.8
0.78
S5K
16.0
0.63
15.5
0.61
25.1
0.99
24.6
0.97
S7K
21.3
0.84
20.3
0.80
31.5
1.24
30.5
1.20
S8K
24.6
0.97
23.6
0.93
37.1
1.46
35.6
1.40
S9K
28.9
1.14
27.9
1.10
41.9
1.65
40.9
1.61
S10K
31.5
1.24
30.5
1.20
46.7
1.84
45.7
1.80
S11K
34.0
1.34
33.0
1.30
49.5
1.95
48.5
1.91
S12K
39.4
1.55
38.4
1.51
55.9
2.20
50.8
2.00
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
9100
13.2
0.52
11.9
0.47
24.1
0.95
23.1
0.91
9101
18.0
0.71
14.0
0.55
25.9
1.02
9102
19.0
0.75
17.0
0.67
9103
20.6
0.81
9104
Basic
Bearing
Number
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
200
14.2
0.56
12.7
0.50
24.9
0.98
24.6
0.97
24.6
0.97
201
16.3
0.64
14.7
0.58
26.9
1.06
30.0
1.18
28.7
1.13
202
19.0
0.75
17.5
0.69
19.0
0.75
33.0
1.30
31.8
1.25
203
21.3
0.84
24.9
0.98
22.6
0.89
37.1
1.46
35.8
1.41
204
9105
30.0
1.18
27.4
1.08
41.9
1.65
40.6
1.60
9106
35.1
1.38
34.0
1.34
49.0
1.93
9107
41.4
1.63
38.9
1.53
9108
46.0
1.81
9109
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
300
15.0
0.59
12.7
0.50
30.0
1.18
29.2
1.15
26.7
1.05
301
17.5
0.69
16.0
0.63
31.0
1.22
30.7
1.21
30.0
1.18
29.2
1.15
302
20.6
0.81
19.0
0.75
36.1
1.42
35.6
1.40
19.6
0.77
34.0
1.34
33.3
1.31
303
23.1
0.91
21.1
0.83
40.9
1.61
40.6
1.60
25.4
1.00
23.9
0.94
40.9
1.61
40.1
1.58
304
26.9
1.06
23.9
0.94
45.0
1.77
44.4
1.75
205
31.0
1.22
29.0
1.14
46.0
1.81
45.2
1.78
305
33.3
1.31
29.0
1.14
55.1
2.17
53.1
2.09
47.8
1.88
206
37.3
1.47
34.0
1.34
56.1
2.21
54.9
2.16
306
39.6
1.56
34.0
1.34
65.0
2.56
62.0
2.44
56.1
2.21
54.6
2.15
207
43.7
1.72
38.9
1.53
65.0
2.56
62.7
2.47
307
45.2
1.78
42.9
1.69
71.1
2.80
69.1
2.72
43.9
1.73
62.0
2.44
60.7
2.39
208
49.3
1.94
43.9
1.73
72.9
2.87
70.6
2.78
308
50.8
2.00
49.0
1.93
81.0
3.19
77.7
3.06
51.6
2.03
49.3
1.94
69.1
2.72
67.8
2.67
209
54.1
2.13
49.3
1.94
78.0
3.07
75.4
2.97
309
57.9
2.28
54.1
2.13
90.9
3.58
86.6
3.41
9110
56.4
2.22
54.1
2.13
73.9
2.91
72.6
2.86
210
59.4
2.34
54.1
2.13
83.1
3.27
80.5
3.17
310
63.5
2.50
59.9
2.36
100.1
3.94
95.2
3.75
9111
63.0
2.48
59.2
2.33
83.1
3.27
81.8
3.22
211
64.5
2.54
61.2
2.41
93.5
3.68
90.4
3.56
311
69.8
2.75
65.0
2.56
110.0
4.33
104.9
4.13
9112
67.8
2.67
64.3
2.53
88.1
3.47
86.9
3.42
212
71.4
2.81
67.8
2.67
101.1
3.98
98.3
3.87
312
74.7
2.94
72.1
2.84
118.1
4.65
112.8
4.44
9113
72.1
2.84
69.1
2.72
93.0
3.66
81.7
3.61
213
77.0
3.03
72.6
2.86
111.0
4.37
106.4
4.19
313
81.0
3.19
77.0
3.03
128.0
5.04
122.2
4.81
9114
79.0
3.11
73.9
2.91
103.1
4.06
100.8
3.97
214
81.8
3.22
77.7
3.06
116.1
4.57
112.0
4.41
314
87.4
3.44
82.0
3.23
137.9
5.43
130.3
5.13
9115
84.1
3.31
79.0
3.11
108.0
4.25
105.7
4.16
215
87.4
3.44
82.6
3.25
120.9
4.76
116.6
4.59
315
98.6
3.88
87.1
3.43
148.1
5.83
139.7
5.50
9116
90.4
3.56
84.1
3.31
118.1
4.65
114.3
4.50
216
93.7
3.69
90.2
3.55
130.0
5.12
125.2
4.93
316
100.1
3.94
91.9
3.62
158
6.22
149.4
5.88
9117
95.2
3.75
88.9
3.50
122.9
4.84
119.6
4.71
217
98.6
3.88
95.2
3.75
140.0
5.51
134.9
5.31
317
104.9
4.13
99.1
3.90
166.1
6.54
157.2
6.19
9118
102.4
4.03
97.5
3.84
131.1
5.16
130.3
5.13
218
105.7
4.16
100.1
3.94
150.1
5.91
142.7
5.62
318
111.3
4.38
103.9
4.09
176.0
6.93
165.1
6.50
9120
111.3
4.38
107.4
4.23
141.0
5.55
138.2
5.44
219
111.3
4.38
106.9
4.21
158.0
6.22
153.9
6.06
319
117.6
4.63
109.0
4.29
185.9
7.32
174.8
6.88
9121
118.4
4.66
115.1
4.53
150.1
5.91
146.0
5.75
220
117.6
4.63
112.0
4.41
167.9
6.61
160.3
6.31
320
124.0
4.88
114.0
4.49
200.9
7.91
187.4
7.38
9122
124.7
4.91
119.9
4.72
160.0
6.30
157.0
6.18
221
124.0
4.88
117.1
4.61
178.1
7.01
174.8
6.88
321
130.3
5.13
119.1
4.69
211.1
8.31
196.8
7.75
99
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
9124
134.1
5.28
130.0
5.12
169.9
6.69
165.1
6.50
9126
147.6
5.81
140.0
5.51
190.0
7.48
9128
153.9
6.06
147.6
5.81
9130
167.4
6.59
9132
Basic
Bearing
Number
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
222
130.3
5.13
121.9
4.80
188.0
7.40
179.3
7.06
184.1
7.25
224
143.0
5.63
132.1
5.20
202.9
7.99
200.2
7.88
195.1
7.68
226
152.4
6.00
144.0
5.67
162.1
6.38
213.1
8.39
206.5
8.13
228
165.1
6.50
176.8
6.96
166.6
6.56
228.6
9.00
222.2
8.75
230
9134
192.0
7.56
182.1
7.17
247.9
9.76
239.8
9.44
9138
212.9
8.38
201.9
7.95
278.1
10.95
9140
224.5
8.84
212.1
8.35
9144
246.4
9.70
9148
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
322
139.7
5.50
124.0
4.88
226.1
8.90
209.6
8.25
192.0
7.56
324
152.4
6.00
134.1
5.28
246.1
9.69
226.8
8.93
215.9
8.50
206.5
8.13
326
163.6
6.44
148.1
5.83
262.1
10.32
246.1
9.69
153.9
6.06
236.0
9.29
223.8
8.81
328
176.0
6.93
158.0
6.22
281.9
11.10
263.7
10.38
177.0
6.97
164.1
6.46
256.0
10.08
241.3
9.50
330
189.0
7.44
167.9
6.61
302.0
11.89
280.9
11.06
232
186.9
7.36
174.0
6.85
276.1
10.87
260.4
10.25
332
188.0
7.84
178.0
7.01
322.1
12.68
294.1
11.58
266.7
10.5
234
202.7
7.98
188.0
7.40
292.1
11.50
276.4
10.88
334
213.4
8.40
188.0
7.40
342.1
13.47
311.7
12.27
297.9
11.73
285.0
11.22
236
212.9
8.38
198.1
7.80
302.0
11.89
281.7
11.09
336
223.5
8.80
198.1
7.80
362.0
14.25
331.5
13.05
233.9
9.21
326.1
12.84
310.9
12.24
238
222.8
8.77
208.0
8.19
322.1
12.68
301.8
11.88
338
237.5
9.35
212.1
8.35
378.2
14.89
345.2
13.59
266.7
10.50
254.0
10.00
345.9
13.62
330.7
13.02
240
239.3
9.42
217.9
8.58
342.1
13.47
319.3
12.57
340
249.9
9.84
222.0
8.74
398.0
15.67
365.0
14.37
9152
291.8
1 1.49
278.1
10.95
382.0
15.04
366.8
14.44
242
246.1
9.69
225.3
8.87
362.2
14.26
336.8
13.26
342
260.1
10.24
232.2
9.14
418.3
16.47
385.3
15.17
9156
313.2
12.33
297.9
11.73
402.1
15.83
386.8
15.23
244
257.6
10.14
238.0
9.37
382.0
15.04
356.6
14.04
344
272.5
10.73
242.1
9.53
437.9
17.24
405.4
15.96
9160
339.3
1 3.36
318.0
12.52
442.0
17.40
421.6
16.60
246
268.7
10.58
247.9
9.76
402.1
15.83
370.8
14.60
348
292.6
11.52
262.1
10.32
478.0
18.82
439.9
17.32
9164
360.4
14.19
338.1
13.31
462.0
18.19
441.7
17.39
248
283.5
11.16
258.1
10.16
421.9
16.61
385.6
15.18
352
318.5
12.54
288.0
11.34
512.1
20.16
474.0
18.66
9180
457.2
18.00
431.8
17.00
561.8
22.12
549.1
21.62
250
293.4
11.55
268.0
10.55
442.0
17.40
398.8
15.70
356
341.1
13.43
308.1
12.13
551.9
21.73
511.3
20.13
100
Hs
NON-STANDARD EXTRA-LARGE
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
7405
37.3
1.47
34.0
1.34
71.1
2.80
66.8
2.63
7406
43.7
1.72
39.1
1.54
81.0
3.19
7407
49.0
1.93
43.9
1.73
7408
55.6
2.19
7409
Basic
Bearing
Number
Shoulder Diameters
S
Shaft
Hs
Housing
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
120W2
117.6
4.63
111.8
4.40
150.1
5.91
146
5.75
76.2
3.00
122W
124.7
4.91
120.1
4.73
162.8
6.41
158.8
6.25
90.9
3.58
85.9
3.38
124W
134.1
5.28
130.0
5.12
178.1
7.01
174.5
6.87
50.0
1.97
100.1
3.94
93.7
3.69
126W
147.8
5.82
139.7
5.50
193.0
7.60
185.7
7.31
62.0
2.44
55.1
2.17
110.0
4.33
101.6
4.00
128W
157.2
6.19
150.1
5.91
207.8
8.18
202.2
7.96
7410
68.3
2.69
62.0
2.44
118.1
4.65
111.3
4.38
130W
167.4
6.59
162.1
6.38
223.0
8.78
216.2
8.51
7411
74.4
2.93
67.1
2.64
128.0
5.04
120.7
4.75
132W
189.0
7.44
174.0
6.85
234.7
9.24
223.8
8.81
7412
81.0
3.19
72.1
2.84
137.9
5.43
130.3
5.13
134W
191.0
7.52
185.2
7.29
249.7
9.83
244.1
9.61
7413
88.9
3.50
77.0
3.03
148.1
5.83
139.7
5.50
136W
203.2
8.00
195.3
7.69
264.7
10.42
257.8
10.15
7414
93.7
3.69
84.1
3.31
166.1
6.54
155.7
6.13
138W
214.4
8.44
205.2
8.08
284.7
11.21
276.1
10.87
7415
99.8
3.93
88.9
3.50
176.0
6.93
163.6
6.44
224W
143.0
5.63
132.1
5.20
203.2
8.00
192
7.56
7416
104.9
4.13
94.0
3.70
185.9
7.32
173.0
6.81
226
152.4
6.00
144.0
5.67
215.9
8.50
206.5
8.13
7418
119.1
4.69
108.0
4.25
207.0
8.15
196.9
7.75
228
165.1
6.50
153.9
6.06
236.0
9.29
223.8
8.81
7420
131.3
5.17
119.9
4.72
233.9
9.21
223.3
8.79
276-2
401.8
15.82
400.1
15.75
463.6
18.25
461.5
18.17
101
Housing shoulder diameters of bearings with Mechani-Seals differ slightly from those of
other types to allow for clearance between the external rotating member of the seal and
the housing shoulder.
Hs
Housing Shoulder
Hs
Diameter
Max.
Min.
mm
in.
mm
in.
36
17.0
0.67
16.8
0.66
36V
17.0
0.67
37
Basic
Bearing
Number
Housing Shoulder
Hs
Diameter
Max.
Min.
mm
in.
mm
in.
202-3
32.5
1.28
31.0
1.22
16.8
0.66
202-4
32.5
1.28
31.0
1.22
20.1
0.79
19.6
0.77
203
36.6
1.44
35.8
1.41
37V
20.1
0.79
19.6
0.77
204
43.7
1.72
41.1
1.62
34
20.1
0.79
19.6
0.77
204-2
43.7
1.72
41.1
1.62
38V
20.1
0.79
19.6
0.77
205
48.5
1.91
46.7
1.84
39
23.1
0.91
22.6
0.89
205-2
48.5
1.91
46.7
1.84
39V
23.1
0.91
22.6
0.89
206
57.9
2.28
56.4
2.22
200
27.7
1.09
26.2
1.03
207
67.6
2.66
64.3
2.53
201
29.5
1.16
27.7
1.09
208
75.4
2.97
71.4
2.81
20-2
29.5
1.16
27.7
1.09
209
80.3
3.16
77.0
3.03
201-3
29.5
1.16
27.7
1.09
209-2
80.3
3.16
77.0
3.03
202
32.5
1.28
31.0
1.22
211
93.7
3.69
90.4
3.56
202-2
32.5
1.28
31.0
1.22
102
Hs
KRR
Type
G-KRR
Type
RA-RR
Type
GRA-RR
Type
GYA-RR(1)
Type
Shaft
Size
Basic
Outer
Ring
Size
Stationary Housing
D
Housing Bore
Shoulder Diameter
Mean Fit
Hs
Min.
Max.
Loose
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
203
40.000
1.5748
40.015
1.5754
0.013
0.0005
34.8
1.37
34.0
1.34
204
47.000
1.8504
47.015
1.8510
0.013
0.0005
40.9
1.61
40.6
1.60
205
51.999
2.0472
52.017
2.0479
0.015
0.0006
46.0
1.81
45.7
1.80
206
61.999
2.4409
62.017
2.4416
0.015
0.0006
56.1
2.21
54.9
2.16
207
71.999
2.8346
72.017
2.8353
0.015
0.0006
56.1
2.56
54.9
2.47
208
80.000
3.1496
80.018
3.1503
0.020
0.0006
78.0
2.87
75.4
2.78
209
85.001
3.3465
85.024
3.3474
0.020
0.0008
78.0
3.07
75.4
2.97
210
90.000
3.5433
90.023
3.5442
0.020
0.0008
83.1
3.27
81.0
3.19
211
100.000
3.9370
100.023
3.9379
0.020
0.0008
90.9
3.58
90.4
3.56
mm
in.
E17KRR
1008KRR
1010KRR(KR)
1011KRR
GE17KRR
G1010KRR
G1011KRR
RAE17RR
RA008RR
RA009RR
RA010RR
GRAE17RR
GRA008RR
GRA009RR
GRA010RR
GYAE17RR
GYA0008RR
GYA009RR
GYA010RR
5/8
11/16
E20KRR
1012KRR(KR)
GE20KRR
G1012KRR
RAE20RR
RA012RR
GRAE20RR
GRA012RR
GYAE20RR
GYA012RR
3/4
E25KRR
1013KRR
1014KRR
1015KRR(KR)
1100KRR(KR)
GE25KRR
G1014KRR
G1015KRR
G1100KRR
RAE25RR
RA013RR
RA014RR
RA015RR
RA100RR
GRAE25RR
GRA013RR
GRA014RR
GRA015RR
GRA100RR
GYAE25RR
GYA013RR
GYA014RR
GYA015RR
GYA100RR
E30KRR
1102KRR(KR)
1103KRR(KR)
GE30KRR
G1101KRR
G1102KRR
G1103KRR
RAE30RR
RA101RR
RA102RR
RA103RR
GRAE30RR
GRA101RR
GRA102RR
GRA103RR
GYAE30RR
GYA101RR
GYA102RR
GYA103RR
GYA103RR2
30
1 1/16
1 1/8
1 3/16
1 1/4
E35KRR
1104KRR(KR)
1105KRR
1106KRR
1107KRR(KR)
GE35KRR
G1104KRR
G1106KRR
G1107KR
RAE35RR
RA104RR
RA105RR
RA106RR
RRA107RR
GRAE35RR
GRA104RR
GRA105RR
GRA106RR
GRA107RR
GYAE35RR
GYA104RR
GYA105RR
GYA106RR
GYA107RR
35
1 1/4
1 5/16
1 3/8
1 7/16
1108KRR(KR)
G1108KRR
RA108RR
RA106RR
GRAE40RR
GRA108RR
GRA109RR
GYAE40RR
GYA108RR
GYA109RR
40
1 1/2
1 9/16
E45KRR
1110KRR
1111KRR(KR)
1112KRR(KR)
G1110KRR
G1111KRR
G1112KRR
RA110RR
RA111RR
RA112RR
GRAE45RR
GRA110RR
GRA111RR
GRA112RR
GYAE45RR
GYA110RR
GYA111RR
GYA112RR
45
1 5/8
1 11/16
1 34
E50KRR
1114KRR
1115KRR(KR)
GE50KRR
G1115KRR
RAE50RR
RA113RR
RA114RR
RA115RR
GRAE50RR
GRA113RR
GRA114RR
GRA115RR
GRA115RR2
GYAE50RR
GYA113RR
GYA114RR
GYA115RR
50
1 13/16
1 7/8
1 15/16
2
E55KRR
1200KRR(KR)
1202KRR
1203KRR(KR)
GE55KRR
G1200KRR
G1203KRR
RAE55RR
RA200RR
RA201RR
RA202RR
RA203RR
GRAE55RR
GRA200RR
GRA201RR
GRA202RR
GRA203RR
GYAE55RR
GYA200RR
GYA201RR
GYA202RR
GYA203RR
55
2
2 1/16
2 1/8
2 3/16
E60KRR
1204KRR
1207KRR(KR)
GE60KRR
G1207KRR
60
2 1/4
2 7/16
212
110.000
4.3307
110.02
4.3316
0.020
0.0008
101.1
3.98
98.3
3.87
75
2 15/16
215
130.000
5.1181
130.025
5.1191
0.023
0.0009
120.9
4.76
116.6
4.59
E75KRR
1215KRR
17
1/2
9/16
20
25
13/16
7/8
15/16
103
Fitting Practice
Tables 68 and 69 on page 131 provide guidelines for shaft and
housing fits related to particular operating conditions for ISO
P0 (ABEC 1) and ISO P6 (ABEC 3) radial ball bearings. Shaft and
housing tolerance guidelines are shown on pages 132-145.
SETTING
Correct bearing mounting and fitting practices are key
components of proper bearing setting. Setting is the amount of
clearance or interference within a mounted bearing. Bearing
internal clearance is affected by the tightness of the fit to the
inner and outer rings. Proper bearing setting is crucial to bearing
life and performance. Application-dependant factors such as
load, speed, bearing position, installation method, materials of
construction, runout accuracy, thermal considerations, hoop
stress, shaft design and housing design can affect internal
clearance and should be taken into account when determining
the bench setting. This section provides tables and discussion
to aid in selection of the proper bearing mounting and fitting
procedures to optimize performance in general applications.
For special applications, please consult your Timken engineer
for review.
Bearing
Industry
Number
Designation
Prefix
104
JJ
Applied load
When the inner and outer ring raceway curvatures are accurately
known, the free endplay can readily be calculated from the values
of no load radial clearance by the following formula:
E =
4d[RIC](KO + Ki - 1) - RIC2 or
4d[RIC](KO + Ki - 1)
E
= sin-1
2 (Ko + Ki - 1)d
105
Table 51. Radial Ball Bearings Radial Internal Clearance acceptance Limits(1)
Timken Prefix (Industry Designation)
Basic
Bore Diameter
Over
Incl.
H(C2)
Max.
mm
in.
R(C0)
Min.
Max.
mm
in.
P(C3)
Min.
Max.
mm
in.
J(C4)
Min.
Max.
mm
in.
JJ(C5)
Min.
Max.
mm
in.
Min.
mm
in.
2.5000
0.0984
10.000
0.3937
0.007
0.0003
0.000
0.0000
0.013
0.0005
0.002
0.0001
0.023
0.0009
0.008
0.0003
0.029
0.0011
0.014
0.0006
0.037
0.0015
0.020
0.0008
10.000
0.3937
18.000
0.7087
0.009
0.00035
0.000
0.0000
0.018
0.0007
0.003
0.0001
0.025
0.001
0.011
0.0004
0.033
0.0013
0.018
0.0007
0.045
0.0018
0.025
0.0010
18.000
0.7087
24.000
0.9449
0.010
0.0004
0.000
0.0000
0.020
0.0008
0.005
0.0002
0.028
0.0011
0.013
0.0005
0.036
0.0014
0.020
0.0008
0.048
0.0019
0.028
0.0011
24.000
0.9449
30.000
1.811
0.011
0.00045
0.001
0.0001
0.020
0.0008
0.005
0.0002
0.028
0.0011
0.013
0.0005
0.041
0.0016
0.023
0.0009
0.053
0.0021
0.030
0.0012
30.000
1.811
40.000
1.5748
0.011
0.00045
0.001
0.0001
0.020
0.0008
0.006
0.0002
0.033
0.0013
0.015
0.0006
0.046
0.0018
0.028
0.0011
0.064
0.0025
0.040
0.0016
40.000
1.5748
50.000
1.9685
0.011
0.00045
0.001
0.0001
0.023
0.0009
0.006
0.00025
0.036
0.0014
0.018
0.0007
0.051
0.0020
0.030
0.0012
0.073
0.0029
0.045
0.0018
50.000
1.9685
65.000
2.5591
0.015
0.0006
0.001
0.0001
0.028
0.0011
0.008
0.00035
0.043
0.0017
0.023
0.0009
0.061
0.0024
0.038
0.0015
0.090
0.0035
0.055
0.0022
65.000
2.5591
80.000
3.1496
0.015
0.0006
0.001
0.0001
0.030
0.0012
0.010
0.0004
0.051
0.0020
0.025
0.0010
0.071
0.0028
0.046
0.0018
0.105
0.0041
0.065
0.0026
80.000
3.1496
100.000
3.9370
0.018
0.0007
0.001
0.0001
0.036
0.0014
0.012
0.00045
0.058
0.0023
0.030
0.0012
0.084
0.0033
0.053
0.0021
0.120
0.0047
0.075
0.0030
100.000
3.9370
120.000
4.7244
0.020
0.0008
0.002
0.0001
0.041
0.0016
0.015
0.0006
0.066
0.0026
0.036
0.0014
0.097
0.0038
0.061
0.0024
0.140
0.0055
0.090
0.0035
120.000
4.7244
140.000
5.5118
0.023
0.0009
0.002
0.0001
0.048
0.0019
0.018
0.0007
0.081
0.0032
0.041
0.0016
0.114
0.0045
0.071
0.0028
0.160
0.0063
0.105
0.0041
140.000
5.5118
160.000
6.2992
0.023
0.0009
0.002
0.0001
0.053
0.0021
0.018
0.0007
0.091
0.0036
0.046
0.0018
0.130
0.0051
0.081
0.0032
0.180
0.0071
0.120
0.0047
160.000
6.2992
180.000
7.0886
0.025
0.0010
0.002
0.0001
0.061
0.0024
0.020
0.0008
0.102
0.0040
0.053
0.0021
0.147
0.0058
0.091
0.0036
0.200
0.0079
0.135
0.0053
180.000
7.0886
200.000
7.8740
0.030
0.0012
0.002
0.0001
0.071
0.0028
0.025
0.0010
0.117
0.0046
0.063
0.0025
0.163
0.0064
0.107
0.0042
0.230
0.0091
0.150
0.0059
200.000
7.8740
240.000
9.4488
0.036
0.0014
0.003
0.0001
0.081
0.0032
0.030
0.0012
0.137
0.0054
0.074
0.0029
0.193
0.0076
0.127
0.0050
0.267
0.0105
0.183
0.0072
240.000
9.4488
280.000
11.0236
0.041
0.0016
0.003
0.0001
0.097
0.0038
0.033
0.0013
0.157
0.0062
0.086
0.0034
0.224
0.0088
0.147
0.0058
0.310
0.0122
0.213
0.0084
280.000
11.0236
320.000
12.5984
0.048
0.0019
0.005
0.0002
0.114
0.0045
0.041
0.0016
0.180
0.0071
0.104
0.0041
0.257
0.0101
0.170
0.0067
0.353
0.0139
0.246
0.0097
320.000
12.5984
370.000
14.5669
0.053
0.0021
0.005
0.0002
0.127
0.0050
0.046
0.0018
0.208
0.0082
0.117
0.0046
0.295
0.0116
0.198
0.0078
0.409
0.0161
0.284
0.0112
370.000
14.5669
430.000
26.9291
0.064
0.0025
0.008
0.0003
0.147
0.0058
0.056
0.0022
0.241
0.0095
0.137
0.0054
0.340
0.0134
0.231
0.0091
0.475
0.0187
0.330
0.013
430.000
26.9291
500.000
19.6850
0.074
0.0029
0.010
0.0004
0.170
0.0067
0.066
0.0026
0.279
0.0110
0.160
0.0063
0.396
0.0156
0.269
0.0106
0.551
0.0217
0.386
0.0152
500.000
19.6850
570.000
22.4409
0.081
0.0032
0.010
0.0004
0.193
0.0076
0.074
0.0029
0.318
0.0125
0.183
0.0072
0.450
0.0177
0.307
0.0121
0.630
0.0248
0.439
0.0173
570.000
22.4409
640.000
25.1969
0.091
0.0036
0.013
0.0005
0.216
0.0085
0.085
0.0033
0.356
0.0140
0.206
0.0081
0.505
0.0199
0.345
0.0136
0.706
0.0278
0.495
0.0195
640.000
25.1969
710.000
27.9528
0.114
0.0045
0.020
0.0008
0.239
0.0094
0.107
0.0042
0.394
0.0155
0.229
0.0090
0.564
0.0222
0.384
0.0151
0.780
0.0307
0.554
0.0218
710.000
27.9528
800.000
31.4961
0.211
0.0083
0.028
0.0011
0.353
0.0139
0.201
0.0079
0.587
0.0231
0.345
0.0136
0.833
0.0328
0.577
0.0227
1.148
0.0452
0.823
0.0324
800.000
31.4961
1060.000
41.7323
0.211
0.0083
0.028
0.0011
0.353
0.0139
0.201
0.0079
0.587
0.0231
0.345
0.0136
0.833
0.0328
0.577
0.0227
1.148
0.0452
0.823
0.0324
(1)Standard RIC values for Timken radial ball bearings are R(C0) and P(C3). For bearing O.D. greater than 52 mm (2.0472 in.), P(C3) is recommended.
106
Precision Bearings
Mounting
Machine tools are a common application for precision bearings
and are provided as typical examples in the following discussions.
Common terminology within the machine tool industry is to refer to
the shaft as the spindle. In keeping with this industry preference,
the term spindle is used in the Precision BearingS section of
this manual.
Obtaining good spindle accuracy depends not only on selecting
the proper precision bearings but also on the following factors:
Housing design
Housings are usually made of cast iron or steel and are generally
heat-treated to lessen possible distortion. For smaller, high-speed
applications, steel housings are preferred.
Housing seals
A labyrinth combination of flinger and end cover provides a highly
effective seal against the intrusion of foreign matter. This seal
is suggested for use over a wide range of speeds. For slowerspeed applications, a combination of flinger and a commercial
contact-type seal is usually employed.
Flingers should be machined all over to assure true running.
Their diameters should be concentric with the bore. The outside
diameter of the flinger is often tapered to throw off cutting
compounds, coolants, etc., from the point at which such liquids
may enter the spindle. A drip or run-off groove adjacent to the
open lip of the end cover is desirable and practical.
The axial clearances of the internal faces between flinger and
end cover should be about 1.600 mm (0.0629 in.). The first radial
clearance opening on any design through which liquid may pass
should be made very close, about 0.089 mm (0.0035 in.) per side. The
inner radial clearances should be between 0.380 mm (0.0149 in.) and
0.190 mm (0.0075 in.).
107
(a)
(c)
2 spacers
Fig. 111.
Locking devices.
2 screws
spaced
180 apart
Shafts
Shafts are preferably made from hardened and ground steel;
and, where suitable, a hardness of 45-50 HRC is recommended. If
possible, bearing backing shoulders and seats should be ground in
one operation. This promotes true balance and running accuracy,
which are critical in high-speed applications. Suggested shaft
geometry can be found on page 119.
Locking devices
In most cases, simple 2TS(F) spindle layouts are adjusted by
correct positioning of the rear bearing inner ring. A commonly
used device is a precision adjusting nut. A locking device must
be provided to properly maintain the nut after setting: either
axially by means of two screws 180 degrees opposite pinching
the threads (fig. 111a), or radially by pressure of a screw on a soft
metal shoe (fig. 111b).
For improved accuracy, a ground spacer in conjunction with a
square-ground spindle shoulder and a locking precision nut also
can be used (fig. 112). Good parallelism of the ground-spacer
faces as well as the squareness of the spindle shoulder will
ensure final position of the nut abutment face is tightly controlled
resulting in proper position of the inner ring backface. This
mounting configuration also offers assurance that the initially
defined setting cannot be modified by the final user. Fig. 111c
shows two different solutions with ground spacers. Note the
practicality of the above centerline solution, which allows the
spacer to both increase or decrease the initial setting.
A well-known method of providing good spindle alignment,
roundness and backing squareness is to grind the inner ring seats
and the backing shoulders during the same operation (fig. 113).
In this method, the grinding of the adjusting nut (if any) abutment
face also can be achieved by locking the nut on its thread. This
eliminates possible misalignment of the nut due to internal thread
clearance.
108
Cone seat
Spacer
Spindle shoulder
Fig. 112. Using ground spacer and spindle shoulder together with
a precision nut for improved accuracy.
Grinding
wheel
Simple mounting
Fig. 114 shows the box-type mounting using three bearings. The
two nose bearings are located axially (fixed position) and accept
axial forces in both directions, while the rear bearing is fitted in
a floating position to accommodate the thermal expansion of
the spindle. The floating position can be supported either by a
tapered roller bearing or a cylindrical roller bearing.
Rear
Nose
109
Nut
Spacer
Rear
Fig. 116. Simple paired TS mounting with oil inlet at the small
end of the rollers.
110
2.5 to 3 times d
(theoretical)
Nose
d
Fig. 117. Simple paired TS mounting with oil jets at both ends of
the rollers for inlet and cooling.
Fig. 120 shows the same arrangement with a TSMA bearing. This
arrangement allows the widest range of operating speeds, under
optimum preload.
Pressure control
Pressure control
111
The bore of the housing (DH) and the diameter of the spigot (DS)
(fig. 122) should be machined to give a mean of the suggested
interference fits (pages 170-171).
The bearing is adjusted externally by segments beneath the top
inner-ring clamping plate (fig. 122) to get the required preload.
Your Timken engineer should be consulted for more details about
the use of crossed roller bearings.
DH
DS
112
Tandem mounting, DT
DT
One marked and
one unmarked
outer-ring face
together.
DB
Marked faces
of outer rings
together.
Inner-ring faces
clamped together.
These inner- and
outer-ring faces
are flush.
Clearance
between
inner-ring faces.
Under axial
load equivalent to
twice the normal
preload. Innerand outer-ring
faces are flush
on both sides.
Inner- and
outer-ring faces
not flush
on either side.
Before
mounting
Before Mounting
Mounted
Mounted
Before
Before mounting
Mounting
Mounted
Mounted
Other mountings
Flush-ground (DU) pairs may be mounted in combination with a
single flush-ground bearing as a triplex (TU) set shown below.
Also shown below is a quadruplex (QU) set where three bearings
in tandem are mounted back-to-back with a single bearing.
These arrangements provide high capacity in one direction and
also a positively rigid mounting capable of carrying a moderate
amount of reverse thrust.
DF
Unmarked faces
of outer rings
together.
TU
TU
Clearance
between
outer-ring faces.
Inner- and
outer-ring faces
clamped together.
Faces flush
on both sides.
QU
QU
Before
mounting
Before Mounting
Mounted
Mounted
113
114
Face-to-face
mounting
Back-to-back
mounting
Two
back-to-back
pairs
Two
face-to-face
pairs
Two
tandem pairs
mounted db
MOUNTING DESIGN,
MOUNTING
FITTING PRACTICE
DESIGN, FITTING PRACTICE, setting and installation
PRECISION Bearings Spring-loaded
Precision bearings
Spring-loaded mountings
For high-speed applications such as machine tools, radial and
axial rigidity and smooth spindle performance may be obtained
by spring loading the ball bearings with a predetermined
axial load. Spring loading allows the spindle to float laterally
during temperature changes without appreciably increasing or
decreasing the original spring axial load.
As the inner ring heats up during operation, it expands radially.
This radial expansion applies an increasing load through the
rolling elements and outer ring and finally to the preload springs.
The preload springs deflect slightly to compensate for the loads
due to thermal expansion and maintain a consistent load on the
spindle system.
In some applications, single spring-loaded bearings are employed
at the front and rear locations, mounted in back-to-back
arrangement. Other mountings, similarly spring-loaded, have a
pair of bearings installed in tandem at each end of the spindle
in back-to-back arrangement (DT-DB). In either case, the spring
pressure is applied to the pulley-end or rear bearing position,
placing the shaft in tension between the two bearing locations.
6
q
6
q Incorrect: bearing having largest runout at rear.
High points of runout not in line.
6
q Incorrect: bearing having largest runout at nose.
High points of runout in line.
6
q Incorrect: bearing having largest runout at nose.
High points of runout not in line.
115
Fitting Practices
General guidelines for tapered roller bearings
Non-ferrous housings
116
Perpendicularity (squareness) of each shoulder to its corresponding bearing seat, or as a more practical measure,
perpendicularity of each shoulder to the spindle or housing
centerline established from the two bearing seats.
AA
00
000
m
in
m
in
m
in
m
in
Shaft - Ra
0.8
32
0.6
24
0.4
16
0.2
8
Housing - Ra
1.6
63
0.8
32
0.6
24
0.4
16
117
Ball bearings
Housing fits
Shaft fits
Shaft Diameter
Max
Min.
Max.
Min.
Loose
Tight
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
55.000
2.1654
54.994
2.1651
55.000
2.1654
54.994
2.1651
0.004
0.0002
0.006
0.0003
Housing Bore
Resulting
Mounting Fit
Average Fit
Max
Min.
Max.
Min.
Loose
Tight
Loose
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
90.000
3.5433
89.992
3.5430
90.008
3.5436
90.000
3.5433
0.015
0.0006
0.000
0.0000
0.008
0.0003
118
t3 B
t3 A
A
B
Ra
t2
t2
Ra
t1
t1
t4 A
Shaft tolerances
Tolerance
Value
MV
ABEC 7 (ISO P4)
MMV/MM
ABEC 7/9 (ISO P4S)
MMX
ABEC 9 (ISO P2)
t1
IT2
IT1
IT0
t2
IT2
IT1
IT0
Squareness
t3
IT2
IT1
IT0
Concentricity
t4
IT3
IT2
IT2
16 (in.) or 0.4 m
16 (in.) or 0.4 m
16 (in.) or 0.4 m
Description
Symbol
Roundness
//
Parallelism
Surface Finish
Ra
Shaft Journal
Diameter
dso
mm
Shaft Journal
Diameter
dso
mm
>
IT0
IT1
IT2
IT3
>
IT0
IT1
IT2
IT3
10
0.6
1.0
1.5
2.5
10
20
40
60
100
10
18
0.8
1.2
2.0
3.0
10
18
30
50
80
120
18
30
1.0
1.5
2.5
4.0
18
30
40
60
100
160
30
50
1.0
1.5
2.5
4.0
30
50
40
60
100
160
50
80
1.2
2.0
3.0
5.0
50
80
50
80
120
200
80
120
1.5
2.5
4.0
6.0
80
120
60
100
160
240
120
180
2.0
3.5
5.0
8.0
120
180
80
140
200
310
180
250
3.0
4.5
7.0
10.0
180
250
120
180
280
390
250
315
6.0
8.0
12.0
250
315
240
310
470
119
t2
t3
t2
t3
D
Ra
Ra
t1
t1
t4 A
Housing tolerances
Tolerance
Value
MV
ABEC 7 (ISO P4)
MMV/MM
ABEC 7/9 (ISO P4S)
MMX
ABEC 9 (ISOP2)
Roundness
t1
IT2
IT1
IT0
Parallelism
t2
IT2
IT1
IT0
Squareness
t3
IT2
IT1
IT0
Concentricity
t4
IT3
IT2
IT2
16 (in.) or 0.4 m
16 (in.) or 0.4 m
16 (in.) or 0.4 m
Description
Symbol
Surface Finish
Ra
Housing Journal
Diameter
D
mm
Housing Journal
Diameter
D
mm
>
IT0
IT1
IT2
IT3
>
IT0
IT1
IT2
IT3
10
18
0.8
1.2
2.0
3.0
10
18
30
50
80
120
18
30
1.0
1.5
2.5
4.0
18
30
40
60
100
160
30
50
1.0
1.5
2.5
4.0
30
50
40
60
100
160
50
80
1.2
2.0
3.0
5.0
50
80
50
80
120
200
80
120
1.5
2.5
4.0
6.0
80
120
60
100
160
240
120
180
2.0
3.5
5.0
8.0
120
180
80
140
200
310
180
250
3.0
4.5
7.0
10.0
180
250
120
180
280
390
250
315
3.5
6.0
8.0
12.0
250
315
140
240
310
470
315
400
4.5
6.0
8.0
12.0
315
400
180
240
310
470
120
Rotating speed.
Applied loads.
Bearing configuration and spread.
Lubrication type and flow.
External heat sources.
Many of these parameters directly and interactively affect
operating temperature which, in turn, affects bearing setting.
If possible, it is best to evaluate these effects by conducting
lab tests on the application. Temperature readings at various
locations can confirm or provide additional input for the analysis
tools.
A temperature gradient typically exists across the bearing due
to the fact that the inner ring generates more heat than the outer
ring. The inner and outer ring temperatures are transmitted to
the shaft and housing. The temperature gradient between the
shaft and the housing is typically 2 C to 5 C (4 F to 9 F). It is
valid for any type of bearing and has a direct influence on the
bearing setting.
The use of tapered roller bearings allows the radial loss of endplay
due to the gradient between the spindle and the housing to be
compensated by the axial expansion of the spindle with respect
to the housing through optimization of the bearing spread.
While temperature effects on setting are important, it also is
necessary to consider the effects of bearing configuration and
spread on operating setting. Steps can be taken to optimize the
design so that the setting change is minimal during operation. Fig.
133 shows a graphical representation of optimum spread.
[( ) ( ) ( ) ( ) ]
K1
0.39
Do1 +
2
K2
0.39
Do2 - L
2
121
during the starting period, care must be taken because the radial
thermal expansion is not immediately compensated by the axial
expansion of the spindle. That occurs later. During this transient
period, a decrease of the axial endplay or an increase of preload
is generally recorded (fig. 136). The loss of endplay can be
calculated by using the same formula on page 121, but ignoring
the parameter L. For this reason, it is generally recommended to
initially set the bearings with a light, cold endplay to avoid any
bearing burn-up, due to excessive preload during the transient
a
a
a
b
b
b
b
b
0
0
Temperature
Temperature
a
Temperature
Axial endplay
Axial
Axial
endplay
endplay
a
a
b
b
Time
Time
Time
a
0
0
b
0
122
Time
Time
Time
b
b
a
a
Axial Load
A
B
C
D
No Preload
Light Preload
Medium Preload
Heavy Preload
Ball bearings
A
B
Radial Load
C
D
No Preload
Light Preload
Medium Preload
Heavy Preload
123
Examples
Shaft Diameter
Tolerance Symbol(1)
Remarks
mm
in.
Stationary
inner ring load
0.25C
See table 57
for shaft size
All diameters
s4
g6
h6
over
incl.
18
0.7087
100
3.9370
100
3.9370
200
7.8740
m6
18
0.7087
65
2.5590
m5
65
2.5590
100
3.9370
m6
100
3.9370
140
5.5118
n6
140
5.5118
280
11.0236
p6
280
11.0236
500
19.6850
r6
500
19.6850
and up
18
0.7087
65
2.5590
m6
65
2.5590
100
3.9370
n6
100
3.9370
140
5.5118
p6
140
5.5118
200
7.8740
r6
200
7.8740
500
19.6850
r7
k6
In very accurate
applications, k5 and m5
are used instead of k6
and m6 respectively.
r7
Applications in general
(1)For solid steel shaft. See tables on pages 132-137 for tolerance values.
124
All diameters
One-piece
bearing
housing
Rotating outer
ring load
Indeterminate
load direction
Split or
one-piece
bearing
housing
One-piece
bearing
housing
Stationary
outer ring load
Applications
requiring
particular
accuracy
Tolerance Symbol(1)
Examples
Remarks
P6
P7
N7
M7
Normal and light loads, axial displacement of the outer ring is desirable
All loads
H7
Line shaftings
H8
Dryer cylinders
G7
For main
spindles
in machine
tools
M6
K6
J6
K7
J7
N6
P6
(1)Cast iron or steel housing. For tolerance values see tables on pages 138-145. For housings of light metal, tolerances generally are selected that give a slightly tighter fit
Bore
Over
Incl.
mm
in.
mm
in.
50.000
Tolerance(1)
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
80.000
-0.015
-0.025
-0.036
1.9685
3.1496
-0.0006
-0.0010
-0.0014
0.010L
0.036L
0.0004L
0.0014L
80.000
120.000
-0.020
-0.033
-0.043
3.4196
4.7244
-0.0008
-0.0013
-0.0017
120.000
180.000
-0.025
-0.041
-0.053
4.7244
7.0866
-0.0010
-0.0016
-0.0021
180.000
250.000
-0.030
-0.048
-0.064
7.0866
9.8425
-0.0012
-0.0019
-0.0025
0.013L
0.043L
0.0005L
0.0017L
0.015L
0.053L
0.0006L
0.0021L
0.018L
0.064L
0.0007L
0.0025L
125
Shaft Diameter
mm
in.
mm
in.
Shaft Tolerance
Symbol(1)
Lower
Upper
C(2)
All
All
g6
All
All
h6
Upper
0.08C
0.18C
0.08C
0.18C
0
0
40
1.57
k6(3)
40
1.57
140
5.51
m6(4)
140
5.51
320
12.60
n6
320
12.60
500
19.68
p6
500
19.68
0
0
40
1.57
k5
40
1.57
100
3.94
m5
100
3.94
140
5.51
m6
140
5.51
320
12.60
n6
320
12.60
500
19.68
p6
500
19.68
r6
0
0
40
1.57
m5(5)
40
1.57
65
2.56
m6(5)
65
2.56
140
5.51
n6(5)
140
5.51
320
12.60
p6(5)
320
12.60
500
19.68
r6(5)
500
19.68
r7(5)
Thrust Loads
Not suggested, consult your Timken engineer.
(1)For solid shaft. See pages 132-137 for tolerance values.
(2)C = dynamic load rating.
126
All
Incl.
Shaft Diameter
Shaft Tolerance
mm
in.
mm
in.
100
3.93
120
4.72
n6
120
4.72
225
8.85
p6
225
8.85
400
15.75
r6
400
15.75
(1)For solid shaft. See pages 132-137 for tolerance values.
Symbol(1)
s6
5200, A5200 Metric Series Shaft and Housing Fits and Tolerances
Incl.
mm
in.
mm
in.
80
3.1496
Bore
Tolerance(2)
Press Fit
Rotating Inner Ring
Shaft Diameter
Slip Fit
Stationary Inner Ring
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
120
4.7236
-0.020
-0.0008
+0.048
+0.0019
+0.025
+0.0010
120
4.7236
140
5.5108
-0.025
-0.0010
+0.056
+0.0022
140
5.5108
180
7.0856
-0.025
-0.0010
180
7.0856
240
9.4476
-0.030
-0.0012
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.025T
0.0010T
0.069T
0.0027T
0.000
0.0000
-0.023
-0.0009
0.023L
0.0009L
0.020T
0.0008T
+0.030
+0.0012
0.030T
0.0012T
0.081T
0.0032T
0.000
0.0000
-0.025
-0.0010
0.025L
0.0010L
0.025T
0.0010T
+0.071
+0.0028
+0.046
+0.0018
0.046T
0.0018T
0.097T
0.0038T
0.000
0.0000
-0.025
-0.0010
0.025L
0.0010L
0.025T
0.0010T
+0.081
+0.0032
+0.051
+0.0020
0.051T
0.0020T
0.112T
0.0044T
0.000
0.0000
-0.030
-0.0012
0.030L
0.0012L
0.030T
0.0012T
(1) When shaft is used as ring surface, hardness to be Rc58 minimum and surface finish to be 15 RMS.
(2)Tolerance range is from +0 to value listed.
Incl.
mm
in.
mm
in.
O.D.
Tolerance(1)
Slip Fit
Stationary Outer Ring
Housing Diameter
Press Fit
Rotating Outer Ring
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
180
7.0866
-0.025
-0.0010
+0.022
+0.0008
-0.015
-0.0006
180
7.0866
200
7.8740
-0.030
-0.0012
+0.018
+0.0007
200
7.874
230
9.0551
-0.030
-0.0012
230
9.0551
250
9.8425
250
9.8425
Housing Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.015T
0.0006T
0.046L
0.0018L
-0.025
-0.0010
-0.056
-0.0022
0.056T
0.0022T
0.000L
0.0000L
-0.018
-0.0007
0.018T
0.0007T
0.048L
0.0019L
-0.030
-0.0012
-0.066
-0.0026
0.066T
0.0026T
0.000L
0.0000L
+0.023
+0.0009
-0.018
-0.0007
0.018T
0.0007T
0.053L
0.0021L
-0.030
-0.0012
-0.066
-0.0026
0.066T
0.0026T
0.000L
0.0000L
-0.030
-0.0012
+0.028
+0.0011
-0.018
-0.0007
0.018T
0.0007T
0.058L
0.0023L
-0.030
-0.0012
-0.066
-0.0026
0.066T
0.0026T
0.000L
0.0000L
270
10.6299
-0.036
-0.0014
+0.028
+0.0011
-0.018
-0.0007
0.018T
0.0007T
0.064L
0.0025L
-0.030
-0.0012
-0.071
-0.0028
0.071T
0.0028T
0.005L
0.0002L
270
10.6299
310
12.2047
-0.036
-0.0014
+0.033
+0.0013
-0.018
-0.0007
0.018T
0.0007T
0.069L
0.0027L
-0.036
-0.0014
-0.071
-0.0028
0.071T
0.0028T
0.005L
0.0002L
310
12.2047
400
15.7480
-0.041
-0.0016
+0.038
+0.0015
-0.018
-0.0007
0.018T
0.0007T
0.079L
0.0031L
-0.036
-0.0014
-0.076
-0.0030
0.079T
0.0030T
0.005L
0.0002L
400
15.748
440
17.3228
-0.046
-0.0018
+0.041
+0.0016
-0.023
-0.0009
0.023T
0.0009T
0.086L
0.0034L
-0.036
-0.0014
-0.086
-0.0034
0.086T
0.0034T
0.010L
0.0004L
127
Bearing Bore
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
100
3.937
0.183
0.0072
0.127
0.005
100
3.937
120
4.7244
0.188
0.0074
0.127
0.005
120
4.7244
140
5.5118
0.208
0.0082
0.142
0.0056
140
5.5118
170
6.6929
0.224
0.0088
0.152
0.006
170
6.6929
180
7.0866
0.229
0.009
0.152
0.006
180
7.0866
220
8.6614
0.254
0.01
0.173
0.0068
220
8.6614
240
9.4488
0.269
0.0106
0.183
0.0072
Bearing
Number
Bearing Bore
Width
Over
Incl.
Bore &
Inner O.D.(1)
mm
in.
mm
in.
mm
in.
mm
in.
80
3.1496
120
4.7244
-0.020
-0.0008
-0.203
-0.0080
120
4.7244
80
7.0866
-0.025
-0.0010
-0.254
-0.0100
180
7.0866
250
9.8425
-0.030
-0.0012
-0.305
-0.0120
+0
O.D.(1)
Width
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
150
5.9055
180
7.0866
-0.025
-0.0010
+0.036
+0.0014
180
7.0866
250
9.8425
-0.030
-0.0012
+0.041
+0.0016
250
9.8425
315
12.4016
-0.036
-0.0014
+0.046
+0.0018
315
12.4016
400
15.748
-0.041
-0.0016
+0.051
+0.0020
400
15.748
500
19.685
-0.046
-0.0018
+0.056
+0.0022
128
+0
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
5220 WS
121.064
4.7663
121.044
4.7655
121.036
4.7652
121.016
4.7644
5222 WS
133.007
5.2365
132.987
5.2357
132.969
5.235
132.949
5.2343
5224 WS
145.194
5.7163
145.174
5.7155
145.156
5.7148
145.136
5.714
5226 WS
155.042
6.104
155.016
6.103
155.004
6.1025
154.978
6.1015
5228 WS
168.529
6.635
168.504
6.634
168.491
6.6335
168.466
6.6325
5230 WS
181.623
7.1505
181.597
7.1495
181.587
7.149
181.559
7.148
5232 WS
193.713
7.6265
193.688
7.6255
193.675
7.625
193.65
7.624
5234 WS
205.562
8.093
205.537
8.092
205.524
8.0915
205.499
8.0905
5236 WS
216.37
8.5185
216.344
8.5175
216.319
8.5165
216.294
8.5155
5238 WS
229.032
9.017
229.001
9.0158
228.994
9.0155
228.963
9.0143
5240 WS
242.296
9.5392
242.265
9.538
242.245
9.5372
242.214
9.536
5244 WM
266.02
10.4725
265.971
10.4713
265.951
10.4705
265.92
10.4693
5248WM
291.292
11.4682
291.262
11.467
291.241
11.4662
291.211
11.465
(1)All shaft diameters are based on a housing bore to housing O.D. ratio of 0.7.
Outer Ring
Displaceable Axially
P6
No
N6
No
Light loads
Conveyor rollers
Rope sheaves
Tension pulleys
M6
No
M7
No
Electric motors
Pumps
Crankshaft main bearings
K6
Electric motors
Pumps
Crankshaft main bearings
J6
Yes, normally
J6
Yes, normally
General applications
Heavy rail vehicles
H6
Easily
Transmission drives
H7
Easily
Dryer cylinders
G7
Easily
Operating Conditions
Examples
Outer Ring Rotating
No, normally
One-piece housing
Radially split housing
(1)Cast iron steel housing. See pages 138-145 for numerical values. Where wider tolerances are permissible, P7, N7, M7, K7, J7 and H7 values may be used in place of P6, N6, M6,
K6, J6 and H6 values, respectively.
129
Shaft Rotating
Load Stationary
Shaft Diameter(1)
Mean Fit
Tight
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
00
10
0.3937
9.992
0.3934
9.997
0.3936
10.005
0.3939
0.005
0.0002
01
12
0.4724
11.991
0.4721
11.996
0.4723
12.004
0.4726
02
15
0.5906
14.994
0.5903
14.999
0.5905
03
17
0.6693
16.993
0.6690
04
20
0.7874
05
Basic
Bearing
Number
Shaft Rotating
Load Stationary
Shaft Diameter(1)
Mean Fit
Tight
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
14
70
2.7559
69.990
2.7555
69.997
2.7558
70.010
2.7563
0.009
0.00035
0.005
0.0002
15
75
2.9528
74.991
2.9524
74.999
2.9527
75.011
2.9532
0.009
0.00035
15.006
0.5908
0.005
0.0002
16
80
3.1496
79.990
3.1492
79.997
3.1495
80.010
3.1500
0.009
0.00035
16.998
0.6692
17.005
0.6695
0.005
0.0002
17
85
3.3465
84.988
3.3460
84.999
3.3464
85.014
3.3470
0.011
0.00045
19.992
0.7871
19.997
0.7873
20.005
0.7876
0.005
0.0002
18
90
3.5433
89.987
3.5428
89.997
3.5432
90.013
3.5438
0.011
0.00045
25
0.9843
24.994
0.9840
24.999
0.9842
25.006
0.9845
0.005
0.0002
19
95
3.7402
94.988
3.7397
94.999
3.7401
95.014
3.7407
0.011
0.00045
06
30
1.1811
29.992
1.1808
29.997
1.1810
30.005
1.1813
0.005
0.0002
20
100
3.9370
99.987
3.9365
99.997
3.9369
100.013
3.9375
0.011
0.00045
07
35
1.3780
34.994
1.3777
34.999
1.3779
35.009
1.3783
0.006
0.00025
21
105
4.1339
104.988
4.1334
104.999
4.1338
105.014
4.1344
0.011
0.00045
08
40
1.5748
39.992
1.5745
39.997
1.5747
40.008
1.5751
0.006
0.00025
22
110
4.3307
109.987
4.3302
109.997
4.3306
110.012
4.3312
0.011
0.00045
09
45
1.7717
44.994
1.7714
44.999
1.7716
45.009
1.7720
0.006
0.00025
24
120
4.7244
119.987
4.7239
119.997
4.7243
120.012
4.7249
0.011
0.00045
10
50
1.9685
49.992
1.9682
49.997
1.9684
50.008
1.9688
0.006
0.00025
26
130
5.1181
129.982
5.1174
129.997
5.1180
130.015
5.1187
0.015
0.0006
11
55
2.1654
54.991
2.1650
54.999
2.1653
55.011
2.1658
0.009
0.00035
28
140
5.5118
139.982
5.5111
139.997
5.5117
140.015
5.5124
0.015
0.0006
12
60
2.3622
59.990
2.3618
59.997
2.3621
60.010
2.3626
0.009
0.00035
30
150
5.9055
149.982
5.9048
149.997
5.9054
150.015
5.9061
0.015
0.0006
13
65
2.5591
64.991
2.5587
64.999
2.5590
65.011
2.5595
0.009
0.00035
130
Outer Ring
Displaceable Axially
P6
No
N6
No
Light loads
Conveyor rollers
Rope sheaves
Tension pulleys
M6
No
M7
No
Electric motors
Pumps
Crankshaft main bearings
K6
Electric motors
Pumps
Crankshaft main bearings
J6
Yes, normally
J6
Yes, normally
General applications
Heavy rail vehicles
H6
Easily
Transmission drives
H7
Easily
Drier cylinders
G7
Easily
Operating Conditions
Examples
Outer Ring Rotating
No, normally
All
(1)Cast iron steel housing. See pages 138-145 for tolerance values. Where wider tolerances are permissible, P7, N7, M7, K7, J7 and H7 values
may be used in place of P6, N6, M6, K6, J6 and H6 values respectively.
Upper
Operating Conditions
Shaft
Tolerance Symbol
Examples
Ce(1)
g6
Wheels
Non-rotating shafts
Ce
h6
Tension pulleys
0.07 Ce
j6(2)
Light loads
0.07 Ce
0.15 Ce
k5
Normal loads
Electrical motors
Turbines
Pumps
Combustion engines
Gear transmissions
0.15 Ce
Ce
m5
Heavy loads
Shock loads
Rail vehicles
Traction motors
Ce
j6(3)
Thrust Loads
All
(3)Bearings with greater than nominal clearance must be used.
131
Incl.
mm
in.
mm
in.
3.000
0.1181
g6
Tolerance(1)
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
6.000
0.2362
-0.008
-0.003
-0.004
-0.0002
6.000
0.2362
10.000
0.3937
-0.008
-0.003
10.000
0.3937
18.000
0.7087
18.000
0.7087
h6
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.012
-0.0005
0.012L
0.004T
0.0005L
0.0001T
0.000
0.0000
-0.005
-0.0002
-0.014
-0.0006
0.014L
0.003T
0.0006L
0.0001T
-0.008
-0.003
-0.006
-0.0002
-0.017
-0.0007
30.000
1.1811
-0.010
-0.0004
-0.007
-0.0003
30.000
1.1811
50.000
1.9685
-0.012
-0.0005
50.000
1.9685
80.000
3.1496
80.000
3.1496
h5
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.008
-0.003
0.008L
0.008T
0.0003L
0.0003T
0.000
0.0000
0.000
0.0000
-0.009
-0.0004
0.009L
0.008T
0.0004L
0.0003T
0.017L
0.002T
0.0007L
-0.0001T
0.000
0.0000
-0.011
-0.0004
-0.020
-0.0008
0.020L
0.003T
0.0008L
0.0001T
0.000
0.0000
-0.009
-0.0004
-0.025
-0.0010
0.025L
0.003T
0.0010L
0.0001T
-0.015
-0.0006
-0.010
-0.0004
-0.029
-0.0011
120.000
4.7244
-0.020
-0.0008
-0.012
-0.0005
120.000
4.7244
180.000
7.0866
-0.025
-0.0010
180.000
7.0866
200.000
7.8740
200.000
7.8740
j5
Fit
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.005
-0.0002
0.005L
0.008T
0.0002L
0.0003T
+0.003
+0.0001
-0.002
-0.0001
0.002L
0.011T
0.0001L
0.0004T
0.000
0.0000
-0.006
-0.0002
0.006L
0.008T
0.0002L
0.0003T
+0.004
+0.0002
-0.002
-0.0001
0.002L
0.012T
0.0001L
-0.0005T
0.011L
0.008T
0.0004L
0.0003T
0.000
0.0000
-0.008
-0.0003
0.008L
0.008T
0.0003L
0.0003T
+0.005
+0.0002
-0.003
-0.0001
0.003L
0.013T
0.0001L
0.0005T
-0.013
-0.0005
0.013L
0.010T
0.0005L
0.0004T
+0.005
+0.0002
-0.004
-0.0002
0.004L
0.015T
0.0002L
0.0006T
0.000
0.0000
-0.016
-0.0006
0.016L
0.012T
0.0006L
0.0005T
+0.006
+0.0002
-0.005
-0.0002
0.005L
0.018T
0.0002L
0.0007T
0.029L
0.005T
0.0011L
0.0002T
0.000
0.0000
-0.019
-0.0007
0.019L
0.015T
0.0007L
0.0006T
+0.006
+0.0002
-0.007
-0.0003
0.007L
0.021T
0.0003L
0.0008T
-0.034
-0.0013
0.034L
0.008T
0.0013L
0.0003T
0.000
0.0000
-0.022
-0.0009
0.022L
0.020T
0.0009L
0.0008T
+0.006
+0.0002
-0.009
-0.0004
0.009L
0.026T
0.0004L
0.0010T
-0.014
-0.0006
-0.039
-0.0015
0.039L
0.011T
0.0015L
0.0004T
0.000
0.0000
-0.025
-0.0010
0.025L
0.025T
0.0010L
0.0010T
+0.007
+0.0003
-0.011
-0.0004
0.011L
0.032T
0.0004L
0.0013T
-0.030
-0.0012
-0.015
-0.0006
-0.044
-0.0017
0.044T
0.015T
0.0017L
0.0006T
0.000
0.0000
-0.029
-0.0011
0.029L
0.030T
0.0011L
0.0012T
+0.007
+0.0003
-0.013
-0.0005
0.013L
0.037T
0.0005L
0.0015T
225.000
8.8583
-0.030
-0.0012
-0.015
-0.0006
-0.044
-0.0017
0.044T
0.015T
0.0017L
0.0006T
0.000
0.0000
-0.029
-0.0011
0.029L
0.030T
0.0011L
0.0012T
+0.007
+0.0003
-0.013
-0.0005
0.013L
0.037T
0.0005L
0.0015T
225.000
8.8583
250.000
9.8425
-0.030
-0.0012
-0.015
-0.0006
-0.044
-0.0017
0.044T
0.015T
0.0017L
0.0006T
0.000
0.0000
-0.029
-0.0011
0.029L
0.030T
0.0011L
0.0012T
+0.007
+0.0003
-0.013
-0.0005
0.013L
0.037T
0.0005L
0.0015T
250.000
9.8425
280.000
11.0236
-0.035
-0.0014
-0.017
-0.0007
-0.049
-0.0019
0.049L
0.018T
0.0019L
0.0007T
0.000
0.0000
-0.032
-0.0013
0.032L
0.035T
0.0013L
0.0014T
+0.007
+0.0003
-0.016
-0.0006
0.016L
0.042T
0.0006L
0.0017T
280.000
11.0236
315.000
12.4016
-0.035
-0.0014
-0.017
-0.0007
-0.049
-0.0019
0.049L
0.018T
0.0019L
0.0007T
0.000
0.0000
-0.032
-0.0013
0.032L
0.035T
0.0013L
0.0014T
+0.007
+0.0003
-0.016
-0.0006
0.016L
0.042T
0.0006L
0.0017T
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing bore.
(1)Tolerance range is from +0 to value listed.
132
j6
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
+0.006
+0.0002
k5
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.002
-0.0001
0.002L
0.014T
0.0001L
0.0005T
+0.006
+0.0002
+0.007
+0.0003
-0.002
-0.0001
0.002L
0.015T
0.0001L
0.0006T
+0.008
+0.0003
-0.003
-0.0001
+0.009
+0.0004
k6
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
+0.001
+0.0000
0.001T
0.014T
0.0000T
0.0005T
+0.007
+0.0003
+0.001
+0.0000
0.001T
0.015T
0.0000T
0.0006T
0.003L
0.016T
0.0001L
0.0006T
+0.009
+0.0004
+0.001
+0.0000
-0.004
-0.0002
0.004L
0.019T
0.0002L
0.0008T
+0.011
+0.0004
+0.011
+0.0004
-0.005
-0.0002
0.005L
0.023T
0.0002L
0.00085T
+0.012
+0.0005
-0.007
-0.0003
+0.013
+0.0005
m5
Fit
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
+0.009
+0.0004
+0.004
+0.0002
0.004T
0.017T
0.0002T
0.0007T
+0.012
+0.0005
+0.006
+0.0002
0.006T
0.020T
0.0002T
0.0008T
0.001T
0.017T
0.0000T
0.0007T
+0.015
+0.0006
+0.007
+0.0003
0.007T
0.023T
0.0003T
0.0009T
+0.002
+0.0001
0.002T
0.021T
0.0001T
0.0008T
+0.017
+0.0007
+0.008
+0.0003
0.008T
0.027T
0.0003T
0.0011T
+0.013
+0.0005
+0.002
+0.0001
0.002T
0.025T
0.0001T
0.0010T
+0.018
+0.0007
+0.002
+0.0001
0.002T
0.030T
0.0001T
0.0012T
+0.020
+0.0008
+0.009
+0.0004
0.009T
0.032T
0.0004T
0.00125T
0.007L
0.027T
0.0003L
0.0011T
+0.015
+0.0006
+0.002
+0.0001
0.002T
0.030T
0.0001T
0.0012T
+0.021
+0.0008
+0.002
+0.0001
0.002T
0.036T
0.0001T
0.0014T
+0.024
+0.0009
+0.011
+0.0004
0.011T
0.039T
0.0004T
0.0015T
-0.009
-0.0004
0.009L
0.033T
0.0004L
0.0013T
+0.018
+0.0007
+0.003
+0.0001
0.003T
0.038T
0.0001T
0.0015T
+0.025
+0.0010
+0.003
+0.0001
0.003T
0.045T
0.0001T
0.0018T
+0.028
+0.0011
+0.013
+0.0005
0.013T
0.048T
0.0005T
0.0019T
+0.014
+0.0006
-0.011
-0.0004
0.011L
0.039T
0.0004L
0.0016T
+0.021
+0.0008
+0.003
+0.0001
0.003T
0.046T
0.0001T
0.0018T
+0.028
+0.0011
+0.003
+0.0001
0.003T
0.053T
0.0001T
0.0021T
+0.033
+0.0013
+0.015
+0.0006
0.015T
0.058T
0.0006T
0.0023T
+0.016
+0.0006
-0.013
-0.0005
0.013L
0.046T
0.0005L
0.0018T
+0.024
+0.0009
+0.004
+0.0002
0.004T
0.054T
0.0002T
0.0021T
+0.037
+0.0015
+0.017
+0.0007
0.017T
0.067T
0.0007T
0.0027T
+0.016
+0.0006
-0.013
-0.0005
0.013L
0.046T
0.0005L
0.0018T
+0.024
+0.0009
+0.004
+0.0002
0.004T
0.054T
0.0002T
0.0021T
+0.037
+0.0015
+0.017
+0.0007
0.017T
0.067T
0.0007T
0.0027T
+0.016
+0.0006
-0.013
-0.0005
0.013L
0.046T
0.0005L
0.0018T
+0.024
+0.0009
+0.004
+0.0002
0.004T
0.054T
0.0002T
0.0021T
+0.037
+0.0015
+0.017
+0.0007
0.017T
0.067T
0.0007T
0.0027T
+0.016
+0.0006
-0.016
-0.0006
0.016L
0.051T
0.0006L
0.0020T
+0.027
+0.0011
+0.004
+0.0002
0.004T
0.062T
0.0002T
0.0025T
+0.043
+0.0017
+0.020
+0.0008
0.020T
0.078T
0.0008T
0.0031T
+0.016
+0.0006
-0.016
-0.0006
0.016L
0.051T
0.0006L
0.0020T
+0.027
+0.0011
+0.004
+0.0002
0.004T
0.062T
0.0002T
0.0025T
+0.043
+0.0017
+0.020
+0.0008
0.020T
0.078T
0.0008T
0.0031T
133
Table
70 continued.
Table
70. Radial Ball, Spherical and cylindrical Roller bearing Shaft tolerances
Bearing Bore
Nominal (Max.)
Over
Incl.
mm
in.
mm
in.
315.000
12.4016
g6
Tolerance(1)
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
355.000
13.9764
-0.040
-0.0016
-0.018
-0.0007
355.000
13.9764
400.000
15.7480
-0.040
-0.0016
400.000
15.7480
450.000
17.7165
450.000
17.7165
h6
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.054
-0.0021
0.054L
0.022T
0.0021L
0.0009T
0.000
0.0000
-0.018
-0.0007
-0.054
-0.0021
0.054L
0.022T
0.0021L
0.0009T
-0.045
-0.0018
-0.020
-0.0008
-0.060
-0.0024
500.000
19.6850
-0.045
-0.0018
-0.020
-0.0008
500.000
19.6850
560.000
22.0472
-0.050
-0.0020
560.000
22.0472
630.000
24.8032
630.000
24.8032
h5
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.036
-0.0014
0.036L
0.040T
0.0014L
0.0016T
0.000
0.0000
-0.036
-0.0014
0.036L
0.040T
0.0014L
0.0016T
0.060L
0.025T
0.0024L
0.0010T
0.000
0.0000
-0.040
-0.0016
-0.060
-0.0024
0.060L
0.025T
0.0024L
0.0010T
0.000
0.0000
-0.022
-0.0009
-0.066
-0.0026
0.066L
0.028T
0.0026L
0.0011T
-0.050
-0.0020
-0.022
-0.0009
-0.066
-0.0026
710.000
27.9528
-0.075
-0.0030
-0.024
-0.0009
710.000
27.9528
800.000
31.4961
-0.075
-0.0030
800.000
31.4961
900.000
35.4331
j5
Fit
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
+0.007
+0.0003
-0.018
-0.0007
0.018L
0.047T
0.0007L
0.0019T
+0.007
+0.0003
-0.018
-0.0007
0.018L
0.047T
0.0007L
0.0019T
0.040L
0.045T
0.0016L
0.0018T
+0.007
+0.0003
-0.020
-0.0008
0.020L
0.052T
0.0008L
0.0021T
-0.040
-0.0016
0.040L
0.045T
0.0016L
0.0018T
+0.007
+0.0003
-0.020
-0.0008
0.020L
0.052T
0.0008L
0.0020T
0.000
0.0000
-0.044
-0.0017
0.044L
0.050T
0.0017L
0.0020T
+0.008
0.0003
-0.022
-0.0009
0.022L
0.058T
0.0009L
0.0023T
0.066L
0.028T
0.0026L
0.0011T
0.000
0.0000
-0.044
-0.0017
0.044L
0.050T
0.0017L
0.0020T
+0.008
+0.0003
-0.022
-0.0009
0.022L
0.058T
0.0009L
0.0023T
-0.074
-0.0029
0.074L
0.051T
0.0029L
0.0021T
0.000
0.0000
-0.050
-0.0020
0.050L
0.075T
0.0020L
0.0030T
+0.010
+0.0004
-0.025
-0.0010
0.025L
0.085T
0.0010L
0.0035T
-0.024
-0.0009
-0.074
-0.0029
0.074L
0.051T
0.0029L
0.0021T
0.000
0.0000
-0.050
-0.0020
0.050L
0.075T
0.0020L
0.0030T
+0.010
+0.0004
-0.025
-0.0010
0.025L
0.085T
0.0010L
0.0035T
-0.100
-0.0039
-0.026
-0.0010
-0.082
0.0032
0.082L
0.074T
0.0032L
0.0029T
0.000
0.0000
-0.056
-0.0022
0.056L
0.100T
0.0022L
0.0039T
+0.012
+0.0005
-0.028
-0.0011
0.028L
0.112T
0.0011L
0.0044T
900.000 1000.000
35.4331 39.3701
-0.100
-0.0039
-0.026
-0.0010
-0.082
0.0032
0.082L
0.074T
0.0032L
0.0029T
0.000
0.0000
-0.056
-0.0022
0.056L
0.100T
0.0022L
0.0039T
+0.012
+0.0005
-0.028
-0.0011
0.028L
0.112T
0.0011L
0.0044T
1000.000 1120.000
39.3701 44.0945
-0.125
-0.0049
-0.028
-0.0011
-0.094
-0.0037
0.094L
0.097T
0.0037L
0.0038T
0.000
0.0000
-0.066
-0.0026
0.066L
0.125T
0.0022L
0.0039T
+0.013
+0.0005
-0.033
-0.0013
0.033L
0.138T
0.0013L
0.0054T
1120.000 1250.000
44.0945 49.2126
-0.125
-0.0049
-0.028
-0.0011
-0.094
-0.0037
0.094L
0.097T
0.0037L
0.0038T
0.000
0.0000
-0.066
-0.0026
0.066L
0.125T
0.0022L
0.0039T
+0.013
+0.0005
-0.033
-0.0013
0.033L
0.138T
0.0013L
0.0054T
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing bore.
(1)Tolerance range is from +0 to value listed.
134
j6
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
+0.018
+0.0007
k5
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.018
-0.0007
0.018L
0.058T
0.0007L
0.0023T
+0.029
+0.0011
+0.018
+0.0007
-0.018
-0.0007
0.018L
0.058T
0.0007L
0.0023T
+0.020
+0.0008
-0.020
-0.0008
+0.020
+0.0008
k6
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
+0.046
+0.0002
0.004T
0.069T
0.0002T
0.0027T
+0.029
+0.0011
+0.004
+0.0002
0.004T
0.069T
0.0002T
0.0027T
0.020L
0.065T
0.0008L
0.0026T
+0.032
+0.0013
+0.005
+0.0002
-0.020
-0.0008
0.020L
0.065T
0.0008L
0.0026T
+0.032
+0.0013
+0.022
+0.0009
-0.022
-0.0009
0.022L
0.072T
0.0009L
0.0029T
+0.022
+0.0009
-0.022
-0.0009
+0.025
+0.0010
m5
Fit
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
+0.046
+0.0018
+0.021
+0.0008
0.021T
0.086T
0.0008T
0.0034T
+0.046
+0.0018
+0.021
+0.0008
0.021T
0.086T
0.0008T
0.0034T
0.005T
0.077T
0.0002T
0.0031T
+0.050
+0.0020
+0.023
+0.0009
0.023T
0.095T
0.0009T
0.0037T
+0.005
+0.0002
0.005T
0.077T
0.0002T
0.0031T
+0.050
+0.0020
+0.023
+0.0009
0.023T
0.095T
0.0009T
0.0037T
+0.030
+0.0012
0.000
0.0000
0.00T
0.080T
0.0000T
0.0032T
+0.056
+0.0022
+0.026
+0.0010
0.026T
0.106T
0.0010T
0.0042T
0.022L
0.072T
0.0009L
0.0029T
+0.030
+0.0012
0.000
0.0000
0.00T
0.080T
0.0000T
0.0032T
+0.056
+0.0022
+0.026
+0.0010
0.026T
0.106T
0.0010T
0.0042T
-0.025
-0.0010
0.025L
0.100T
0.0010L
0.0040T
+0.035
+0.0014
0.000
0.0000
0.000T
0.110T
0.0000T
0.0044T
+0.065
+0.0026
+0.030
+0.0012
0.030T
0.140T
0.0012T
0.0056T
+0.025
+0.0010
-0.025
-0.0010
0.025L
0.100T
0.0010L
0.0040T
+0.035
+0.0014
0.000
0.0000
0.000T
0.110T
0.0000T
0.0044T
+0.065
+0.0026
+0.030
+0.0012
0.030T
0.140T
0.0012T
0.0056T
+0.025
+0.0010
-0.025
-0.0010
0.028L
0.128T
0.0011L
0.0050L
+0.040
+0.0016
0.000
0.0000
0.000T
0.140T
0.0000T
0.0055T
+0.074
+0.0029
+0.0030
+0.0012
0.034T
0.174T
0.0012T
0.0056T
+0.028
+0.0011
-0.028
-0.0011
0.028L
0.128T
0.0011L
0.0050T
+0.040
+0.0016
0.000
0.0000
0.000T
0.140T
0.0000T
0.0055T
+0.074
+0.0029
+0.034
+0.0013
0.034T
0.174T
0.0013T
0.0068T
+0.028
+0.0011
-0.028
-0.0011
0.033L
0.158T
0.0013L
0.0062T
+0.046
+0.0018
0.000
0.0000
0.000T
0.171T
0.0000T
0.0067T
+0.086
+0.0034
+0.040
+0.0016
0.040T
0.211T
0.0016T
0.0083T
+0.033
+0.0013
-0.033
-0.0013
0.033L
0.158T
0.0013L
0.0062T
+0.046
+0.0018
0.000
0.0000
0.000T
0.171T
0.0000T
0.0067T
+0.086
+0.0034
+0.040
+0.0016
0.040T
0.211T
0.0016T
0.0083T
135
Table 71. Radial Ball, Spherical roller and cylindrical roller bearing Shaft tolerances
Bearing Bore
Nominal (Max.)
Over
Incl.
mm
in.
mm
in.
Tolerance(1)
m6
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
3.000 6.000
0.1181 0.2362
-0.008
-0.0003
6.000 10.000
0.2362 0.3937
-0.008
-0.0003
10.000 18.000
0.3937 0.7087
n6
Fit
Shaft Diameter
p6
Fit
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
r6
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.008
-0.0003
18.000 30.000
0.7087 1.1811
-0.010
-0.0004
30.000 50.000
1.1811 1.9685
-0.012
-0.0005
0.009T
+0.025 +0.009 0.037T
+0.0010 +0.0004 0.0004T
0.0145T
50.000 80.000
1.9685 3.1496
-0.015
-0.0006
0.011T
0.020T
+0.030 +0.011 0.045T +0.039 +0.020 0.054T
+0.0012 +0.0004 0.0004T +0.0015 +0.0008 0.0008T
0.0018T
0.0021T
80.000 120.000
3.1496 4.7244
-0.020
-0.0008
0.013T
0.023T
0.037T
+0.035 +0.013 0.055T +0.045 +0.023 0.065T +0.059 +0.037 0.079T
+0.0014 +0.0005 0.0005T +0.0018 +0.0009 0.0009T +0.0023 +0.0015 0.0015T
0.0022T
0.0026T
0.0031T
120.000 180.000
4.7244 7.0866
-0.025
-0.0010
180.000 200.000
7.0866 7.8740
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
mm
in.
r7
Fit
Shaft Diameter
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
0.015T
0.027T
0.043T
0.065T
+0.040 +0.015 0.065T +0.052 +0.027 0.077T +0.068 +0.043 0.093T +0.090 +0.065 0.115T
+0.0016 +0.0006 0.0006T +0.0020 +0.0011 0.0011T +0.0027 +0.0017 0.0017T +0.0035 +0.0026 0.0026T
0.0026T
0.0030T
0.0037T
0.0045T
-0.030
-0.0012
0.017T
0.031L
0.050T
0.077T
+0.046 +0.017 0.076T +0.060 +0.031 0.090T +0.079 +0.050 0.109T +0.106 +0.077 0.136T
+0.0018 +0.0007 0.0007T +0.0024 +0.0012 0.0012L +0.0031 +0.0020 0.0020T +0.0042 +0.0030 0.0030T
0.0030T
0.0036T
0.0043T
0.0054T
200.000 225.000
7.8740 8.8583
-0.030
-0.0012
0.017T
0.031L
0.050T
0.080T
0.080T
+0.046 +0.017 0.076T +0.060 +0.031 0.090T +0.079 +0.050 0.109T +0.109 +0.080 0.139T +0.126 +0.080 0.156T
+0.0018 +0.0007 0.0007T +0.0024 +0.0012 0.0012L +0.0031 +0.0020 0.0020T +0.0043 +0.0031 0.0031T +0.0050 +0.0031 0.0031T
0.0030T
0.0036T
0.0043T
0.0055T
0.0062T
225.000 250.000
8.8583 9.8425
-0.030
-0.0012
0.017T
0.031L
0.050T
0.084T
0.084T
+0.046 +0.017 0.076T +0.060 +0.031 0.090T +0.079 +0.050 0.109T +0.113 +0.084 0.143T +0.130 +0.084 0.160T
+0.0018 +0.0007 0.0007T +0.0024 +0.0012 0.0012L +0.0031 +0.0020 0.0020T +0.0044 +0.0033 0.0033T +0.0051 +0.0033 0.0033T
0.0030T
0.0036T
0.0043T
0.0056T
0.0063T
250.000 280.000
9.8425 11.0236
-0.035
-0.0014
0.020T
0.034T
0.056T
0.094T
0.094T
+0.052 +0.020 0.087T +0.066 +0.034 0.101T +0.088 +0.056 0.123T +0.126 +0.094 0.161T +0.146 +0.094 0.181T
+0.0020 +0.0008 0.0008T +0.0026 +0.0013 0.0013T +0.0035 +0.0022 0.0022T +0.0050 +0.0037 0.0037T +0.0057 +0.0037 0.0037T
0.0034T
0.0040T
0.0049T
0.0064T
0.0071T
280.000 315.000
11.0236 12.4016
-0.035
-0.0014
0.020T
0.034T
0.056T
0.098T
0.098T
+0.052 +0.020 0.087T +0.066 +0.034 0.101T +0.088 +0.056 0.123T +0.130 +0.098 0.165T +0.150 +0.098 0.185T
+0.0020 +0.0008 0.0008T +0.0026 +0.0013 0.0013T +0.0035 +0.0022 0.0022T +0.0051 +0.0039 0.0039T +0.0059 +0.0039 0.0039T
0.0034T
0.0040T
0.0049T
0.0065T
0.0073T
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing bore.
136
Table
71. Radial Ball, Spherical roller and cylindrical roller bearing Shaft tolerances
Table
71 continued.
Bearing Bore
Nominal (Max.)
Over
Incl.
mm
in.
mm
in.
Tolerance(1)
mm
in.
m6
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
n6
Fit
mm
in.
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
p6
Fit
mm
in.
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
r6
Fit
mm
in.
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
r7
Fit
mm
in.
Shaft Diameter
Max.
Min.
mm
in.
mm
in.
Fit
mm
in.
0.021T
0.037T
0.062T
0.108T
0.108T
+0.057 +0.021 0.097T +0.073 +0.037 0.113T +0.098 +0.062 0.138T +0.144 +0.108 0.184T +0.165 +0.108 0.205T
+0.0022 +0.0008 0.0008T +0.0029 +0.0015 0.0015T +0.0039 +0.0024 0.0024T +0.0057 +0.0043 0.0043T +0.0065 +0.0043 0.0043T
0.0038T
0.0045T
0.0055T
0.0073T
0.0081T
315.000 355.000
12.4016 13.9764
-0.040
-0.0016
355.000 400.000
13.9764 15.7480
-0.040
-0.0016
0.037T
0.062T
0.114T
0.114T
+0.073 +0.037 0.113T +0.098 +0.062 0.138T +0.150 +0.114 0.190T +0.171 +0.114 0.211T
+0.0029 +0.0015 0.0015T +0.0039 +0.0024 0.0024T +0.0059 +0.0045 0.0045T +0.0067 +0.0045 0.0045T
0.0045T
0.0055T
0.0075T
0.0083T
400.000 450.000
15.7480 17.7165
-0.045
-0.0018
0.040T
0.068T
0.126T
0.126T
+0.080 +0.040 0.125T +0.108 +0.068 0.153T +0.166 +0.126 0.211T +0.189 +0.126 0.234T
+0.0031 +0.0016 0.0016T +0.0043 +0.0027 0.0027T +0.0065 +0.0050 0.0050T +0.0074 +0.0050 0.0050T
0.0049T
0.0061T
0.0083T
0.0092T
450.000 500.000
17.7165 19.6850
-0.045
-0.0018
0.040T
0.068T
0.132T
0.132T
+0.080 +0.040 0.125T +0.108 +0.068 0.153T +0.172 +0.132 0.217T +0.195 +0.132 0.240T
+0.0031 +0.0016 0.0016T +0.0043 +0.0027 0.0027T +0.0068 +0.0052 0.0052T +0.0077 +0.0052 0.0052T
0.0049T
0.0061T
0.0086T
0.0095T
500.000 560.000
19.6850 22.0472
-0.050
-0.0020
0.078T
0.150T
0.150T
+0.122 +0.078 0.172T +0.194 +0.150 0.244T +0.220 +0.150 0.270T
+0.0048 +0.0031 0.0031T +0.0076 +0.0059 0.0059T +0.0087 +0.0059 0.0059T
0.0068T
0.0096T
0.0107T
560.000 630.000
22.0472 24.8032
-0.050
-0.0020
0.078T
0.155T
0.155T
+0.122 +0.078 0.172T +0.199 +0.155 0.249T +0.225 +0.155 0.275T
+0.0048 +0.0031 0.0031T +0.0078 +0.0061 0.0061T +0.0089 +0.0061 0.0061T
0.0068T
0.0098T
0.0109T
630.000 710.000
24.8032 27.9528
-0.075
-0.0030
0.088T
0.175T
0.175T
+0.138 +0.088 0.213T +0.225 +0.175 0.300T +0.255 +0.175 0.330T
+0.0054 +0.0035 0.0035T +0.0089 +0.0069 0.0069T +0.0100 +0.0069 0.0069T
0.0084T
0.0119T
0.0130T
710.000 800.000
27.9528 31.4961
-0.075
-0.0030
0.088T
0.185T
0.185T
+0.138 +0.088 0.213T +0.235 +0.185 0.310T +0.265 +0.185 0.340T
+0.0054 +0.0035 0.0035T +0.0093 +0.0073 0.0073T +0.0104 +0.0073 0.0073T
0.0084T
0.0123T
0.0134T
800.000 900.000
31.4961 35.4331
-0.100
-0.0039
0.100T
0.210T
0.210T
+0.156 +0.100 0.256T +0.266 +0.210 0.366T +0.300 +0.210 0.400T
+0.0061 +0.0039 0.0039T +0.0105 +0.0083 0.0083T +0.0118 +0.0083 0.0083T
0.0100T
0.0144T
0.0157T
900.000 1000.000
35.4331 39.3701
-0.100
-0.0039
0.100T
0.220T
0.220T
+0.156 +0.100 0.256T +0.276 +0.220 0.366T +0.0310 +0.220 0.410T
+0.0061 +0.0039 0.0039T +0.0109 +0.0087 0.0087T +0.0122 +0.0087 0.0087T
0.0100T
0.0148T
0.0161T
1000.0001120.000
39.3701 44.0945
-0.125
-0.0049
0.120T
0.250T
0.250T
+0.186 +0.120 0.311T +0.316 +0.250 0.441T +0.355 +0.250 0.480T
+0.0073 +0.0047 0.0047T +0.0124 +0.0098 0.0098T +0.0140 +0.0098 0.0098T
0.0122T
0.0173T
0.0189T
1120.0001250.000
44.0945 49.2126
-0.125
-0.0049
0.120T
0.260T
0.260T
+0.186 +0.120 0.311T +0.326 +0.260 0.451T +0.365 +0.260 0.490T
+0.0073 +0.0047 0.0047T +0.0128 +0.0102 0.0102T +0.0144 +0.0102 0.0102T
0.0122T
0.0177T
0.0193T
137
Incl.
mm
in.
mm
in.
10.000
0.3937
Tolerance(1)
F7
G7
H6
H7
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
mm
in.
18.000
0.7087
-0.008
-0.0003
+0.034
+0.0013
18.000
0.7087
30.000
1.1811
-0.009
-0.0035
30.000
1.1811
50.000
1.9685
50.000
1.9685
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
+0.016
+0.0006
0.016L
0.042L
0.0006L
0.0016L
+0.024
+0.0009
+0.041
+0.0016
+0.020
+0.0008
0.020L
0.050L
0.0008L
0.00195L
-0.011
-0.00045
+0.050
+0.0020
+0.025
+0.0010
80.000
3.1496
-0.013
-0.0005
+0.060
+0.0024
80.000
3.1496
120.000
4.7244
-0.015
-0.0006
120.000
4.7244
150.000
5.9055
150.000
5.9055
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
+0.002
+0.0002
0.006L
0.032L
0.0002L
0.0012L
+0.011
+0.0004
+0.028
+0.0011
+0.007
+0.0003
0.007L
0.037L
0.0003L
0.00145L
0.025L
0.061L
0.0010L
0.00245L
+0.034
+0.0013
+0.009
+0.0004
+0.030
+0.0012
0.030L
0.073L
0.0012L
0.0029L
+0.040
+0.0016
+0.071
+0.0028
+0.036
+0.0014
0.036L
0.086L
0.0014L
0.0034L
-0.018
-0.0007
+0.083
+0.0033
+0.043
+0.0017
180.000
7.0866
-0.025
-0.0010
+0.083
+0.0033
180.000
7.0866
250.000
9.8425
-0.030
-0.0012
250.000
9.8425
315.000
12.4016
315.000
12.4016
Fit
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
0.000L
0.019L
0.0000L
0.0007L
+0.018
+0.0007
0.000
0.0000
0.000L
0.026L
0.0000L
0.0010L
+0.013
+0.0005
0.000
0.0000
0.000L
0.022L
0.0000L
0.00085L
+0.021
+0.0008
0.000
0.0000
0.000L
0.030L
0.0000L
0.00125L
0.009L
0.045L
0.0004L
0.00175L
+0.016
+0.0006
0.000
0.0000
0.000L
0.027L
0.0000L
0.00105L
+0.025
+0.0010
0.000
0.0000
0.000L
0.036L
0.0000L
0.00145L
+0.010
+0.0004
0.010L
0.053L
0.0004L
0.0021L
+0.019
+0.0007
0.000
0.0000
0.000L
0.032L
0.0000L
0.0012L
+0.030
+0.0012
0.000
0.0000
0.000L
0.059L
0.0000L
0.0017L
+0.047
+0.0019
+0.012
+0.0005
0.012L
0.062L
0.0005L
0.0025L
+0.022
+0.0009
0.000
0.0000
0.000L
0.037L
0.0000L
0.0015L
+0.035
+0.0014
0.000
0.0000
0.000L
0.050L
0.0000L
0.0020L
0.043L
0.101L
0.0017L
0.0040L
+0.054
+0.0021
+0.014
+0.0006
0.014L
0.072L
0.0006L
0.0028L
+0.025
+0.0010
0.000
0.0000
0.000L
0.043L
0.0000L
0.0017L
+0.040
+0.0016
0.000
0.0000
0.000L
0.058L
0.0000L
0.0023L
+0.043
+0.0017
0.043L
0.108L
0.0017L
0.0043L
+0.054
+0.0021
+0.014
+0.0006
0.014L
0.079L
0.0006L
0.0031L
+0.025
+0.0010
0.000
0.0000
0.000L
0.050L
0.0000L
0.0020L
+0.040
+0.0016
0.000
0.0000
0.000L
0.065L
0.0000L
0.0026L
+0.096
+0.0038
+0.050
+0.0020
0.050L
0.126L
0.0020L
0.0050L
+0.061
+0.0024
+0.015
+0.0006
0.015L
0.091L
0.0006L
0.0036L
+0.029
+0.0011
0.000
0.0000
0.000L
0.059L
0.0000L
0.0023L
+0.046
+0.0018
0.000
0.0000
0.000L
0.076L
0.0000L
0.0030L
-0.035
-0.0014
+0.108
+0.0043
+0.056
+0.0022
0.056L
0.143L
0.0022L
0.0057L
+0.069
+0.0027
+0.17
+0.0007
0.017L
0.104L
0.0007L
0.0041L
+0.032
+0.0013
0.000
0.0000
0.000L
0.067L
0.0000L
0.0027L
+0.052
+0.0020
0.000
0.0000
0.000L
0.087L
0.0000L
0.0034L
400.000
15.7480
-0.040
-0.0016
+0.119
+0.0047
+0.062
+0.0024
0.063L
0.159L
0.0024L
0.0063L
+0.075
+0.0030
+0.018
+0.0007
0.018L
0.115L
0.0007L
0.0046L
+0.089
+0.0014
0.000
0.0000
0.000L
0.129L
0.0000L
0.0030L
+0.057
+0.0022
0.000
0.0000
0.000L
0.097L
0.0000L
0.0038L
400.000
15.7480
500.000
19.6850
-0.045
-0.0018
+0.131
+0.0052
+0.068
+0.0027
0.068L
0.176L
0.0027L
0.0070L
+0.083
+0.0033
+0.020
+0.0008
0.020L
0.128L
0.0008L
0.0051L
+0.097
+0.0016
0.000
0.0000
0.000L
0.142L
0.0000L
0.0034L
+0.063
+0.0025
0.000
0.0000
0.000L
0.108L
0.0000L
0.0043L
500.000
19.6850
630.000
24.8032
-0.050
-0.0020
+0.146
+0.0057
+0.076
+0.0030
0.076L
0.196L
0.0030L
0.0077L
+0.092
+0.0036
+0.022
+0.0009
0.022L
0.142L
0.0009L
0.0056L
+0.110
+0.0017
0.000
0.0000
0.000L
0.160L
0.0000L
0.0037L
+0.070
+0.0028
0.000
0.0000
0.000L
0.120L
0.0000L
0.0048L
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing O.D.
(1)Tolerance range is from +0 to value listed.
138
H8
J6
J7
K6
K7
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
+0.027
+0.0011
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
0.000
0.0000
0.000L
0.035L
0.0000L
0.0014L
+0.006
+0.0002
+0.033
+0.0013
0.000
0.0000
0.000L
0.030L
0.0000L
0.00165L
+0.039
+0.0015
0.000
0.0000
+0.046
+0.0018
0.000
0.0000
+0.054
+0.054
+0.0021
0.000
0.000
0.0000
+0.063
+0.0025
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.005
-0.0002
0.005T
0.014L
0.0002T
0.0005L
+0.10
+0.004
+0.008
+0.0003
-0.005
-0.0002
0.005T
0.017L
0.0002T
0.00065L
0.000L
0.050L
0.0000L
0.00195L
+0.010
+0.0002
-0.006
-0.0002
0.000L
0.059L
0.0000L
0.0023L
+0.013
+0.0005
0.000L
0.069L
0.0000L
0.0027L
0.000
0.0000
+0.063
+0.0025
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.008
-0.0003
0.008T
0.018L
0.0003T
0.0007L
+0.002
+0.0001
+0.012
+0.0005
-0.009
-0.0004
0.009T
0.021L
0.0004T
0.00085L
0.006T
0.021L
0.0002T
0.00085L
+0.014
+0.0006
-0.011
-0.0004
-0.006
-0.0002
0.006T
0.026L
0.0002T
0.0010L
+0.018
+0.0007
+0.016
+0.0006
-0.006
-0.0002
0.006T
0.031L
0.0002T
0.0012L
0.000L
0.081L
0.0000L
0.0032L
+0.018
+0.0007
-0.007
-0.0003
0.000
0.0000
0.000L
0.088L
0.0000L
0.0035L
+0.018
+0.0007
+0.072
+0.0028
0.000
0.0000
0.000L
0.102L
0.0000L
0.0040L
+0.081
+0.0032
0.000
0.0000
+0.036
+0.035
Fit
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.009
-0.0004
0.009T
0.010L
0.0004T
0.0004L
+0.006
+0.0002
-0.012
-0.0005
0.012T
0.014L
0.0005T
0.0005L
+0.002
+0.0001
-0.011
-0.0004
0.011T
0.011L
0.0004T
0.00045L
+0.006
+0.0002
-0.015
-0.0006
0.015T
0.015L
0.0006T
0.00055L
0.011T
0.025L
0.0004T
0.00105L
+0.003
+0.0001
-0.014
-0.0005
0.013T
0.014L
0.0005T
0.00055L
+0.007
+0.0003
-0.018
-0.0007
0.018T
0.018L
0.0007T
0.00065L
-0.012
-0.0005
0.012T
0.031L
0.0005T
0.0012L
+0.004
+0.0002
-0.015
-0.0006
0.015T
0.017L
0.0006T
0.0007L
+0.009
+0.0004
-0.021
-0.0008
0.021T
0.022L
0.0008T
0.0009L
+0.022
+0.0009
-0.013
-0.0005
0.013T
0.037L
0.0005T
0.0015L
+0.004
+0.0002
-0.018
-0.0007
0.018T
0.019L
0.0007T
0.0008L
+0.010
+0.0004
-0.025
-0.0010
0.025T
0.025L
0.0010T
0.0010L
0.007T
0.036L
0.0003T
0.0014L
+0.026
+0.0010
-0.014
-0.0006
0.014T
0.044L
0.0006T
0.0017L
+0.004
+0.0002
-0.021
-0.0008
0.021T
0.022L
0.0008T
0.0009L
+0.012
+0.0005
-0.028
-0.0011
0.028T
0.030L
0.0011T
0.0012L
-0.007
-0.0003
0.007T
0.043L
0.0003T
0.0017L
+0.026
+0.0010
-0.014
-0.0006
0.014T
0.051L
0.0006T
0.0020L
+0.004
+0.0002
-0.021
-0.0008
0.021T
0.029L
0.008T
0.0012L
+0.012
+0.0005
-0.033
-0.028
0.028T
0.037L
0.0011T
0.0015L
+0.022
+0.0007
-0.007
-0.0003
0.007T
0.052L
0.0003T
0.0021L
+0.030
+0.0012
-0.016
-0.0006
0.016T
0.060L
0.0006T
0.0024L
+0.005
+0.0002
-0.024
-0.0009
0.024T
0.035L
0.0009T
0.0014L
+0.013
+0.0005
-0.0011
-0.0013
0.033T
0.043L
0.0013T
0.0017L
0.000L
0.116L
0.0000L
0.0046L
+0.025
+0.0010
-0.007
-0.0003
0.007T
0.060L
0.0003T
0.0024L
+0.036
+0.0014
-0.016
-0.0006
0.016T
0.071L
0.0006T
0.0028L
+0.005
+0.0002
-0.027
-0.0011
0.027T
0.040L
0.0011T
0.0016L
+0.016
+0.0006
-0.036
-0.0014
0.036T
0.051L
0.0014T
0.0020L
0.000
0.0000
0.000L
0.076L
0.0000L
0.0051L
+0.029
+0.0011
-0.007
-0.0003
0.007T
0.069L
0.0003T
0.0027L
+0.039
+0.0015
-0.018
-0.0007
0.018T
0.079L
0.0007T
0.0031L
+0.007
+0.0003
-0.029
-0.0011
0.029T
0.047L
0.0011T
0.0019L
+0.017
+0.0007
-0.040
-0.0016
0.040T
0.057L
0.0016T
0.0023L
+0.040
+0.0038
0.000
0.0000
0.000L
0.085
0.0000L
0.0056L
+0.033
+0.0013
-0.007
-0.0003
0.007T
0.078L
0.0003T
0.0031L
+0.043
+0.0017
-0.020
-0.0008
0.020T
0.088L
0.0008T
0.0035L
+0.008
+0.0003
-0.032
-0.0013
0.032T
0.053L
0.0013T
0.0021L
+0.018
+0.0007
-0.045
-0.0018
0.045T
0.063L
0.0018T
0.0025L
+0.044
+0.0043
0.000
0.0000
0.000L
0.094L
0.0000L
0.0063L
+0.037
+0.0015
-0.007
-0.0003
0.022T
0.098L
0.0003T
0.0035L
+0.048
+0.0019
-0.022
-0.0009
0.022T
0.098L
0.0009T
0.0039L
0.000
0.0000
-0.044
-0.0017
0.044T
0.050L
0.0017T
0.0020L
0.000
0.0000
-0.070
-0.0028
0.070T
0.050L
0.0028T
0.0020L
139
Table
72 continued.
Table
72. Radial Ball, Spherical roller and cylindrical roller bearing HOUSING tolerances
Bearing O.D.
Nominal (Max.)
Over
Incl.
mm
in.
mm
in.
630.000
24.8032
Tolerance(1)
F7
G7
H6
H7
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
mm
in.
800.000
31.4961
-0.075
-0.0030
+0.160
+0.0063
800.000 1000.000
31.4961 39.3701
-0.100
-0.0039
1000.000 1250.000
39.3701 49.2126
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
+0.080
+0.0031
0.080L
0.235L
0.0031L
0.0093L
+0.104
+0.0041
+0.179
+0.0063
+0.086
+0.0034
0.086L
0.276L
0.0034L
0.0108L
-0.125
-0.0049
+0.203
+0.0080
+0.098
+0.0039
1250.000 1600.000
49.2126 62.9921
-0.160
-0.0063
+0.155
+0.0093
1600.000 2000.000
62.9921 78.7402
-0.200
-0.0079
2000.000 2500.000
78.7402 98.4252
-0.250
-0.0098
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
+0.024
+0.0009
0.024L
0.179L
0.0009L
0.0071L
+0.125
+0.0020
+0.116
+0.0046
+0.026
+0.0010
0.026L
0.216L
0.0010L
0.0085L
0.098L
0.328L
0.0039L
0.0129L
+0.133
+0.0052
+0.028
+0.0011
+0.030
+0.0043
0.110L
0.395L
0.0043L
0.0156L
+0.155
+0.0061
+0.270
+0.0106
+0.120
+0.0047
0.120L
0.470L
0.0047L
0.0185L
+0.305
0.0120
+0.0130
+0.0051
0.130L
0.555L
0.0051L
0.0218L
140
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
0.000L
0.200L
0.0000L
0.0030L
+0.080
+0.0031
0.000
0.0000
0.000L
0.155L
0.0000L
0.0061L
+0.140
+0.0022
0.000
0.0000
0.000L
0.240L
0.0000L
0.0061L
+0.090
+0.0035
0.000
0.0000
0.000L
0.190L
0.0000L
0.0074L
0.028L
0.258L
0.0011L
0.0101L
+0.165
+0.0026
0.000
0.0000
0.000L
0.290L
0.0000L
0.0075L
+0.105
+0.0041
0.000
0.0000
0.000L
0.230L
0.0000L
0.0090L
+0.030
+0.0012
0.030L
0.315L
0.0012L
0.0124L
+0.195
+0.0031
0.000
0.0000
0.000L
0.355L
0.0000L
0.0094L
+0.125
+0.0049
0.000
0.0000
0.000L
0.355L
0.0000L
0.0112L
+0.182
+0.0072
+0.032
+0.0013
0.032L
0.382L
0.0013L
0.0151L
+0.230
+0.0036
0.000
0.0000
0.000L
0.430L
0.0000L
0.0115L
+0.150
+0.0059
0.000
0.0000
0.000L
0.350L
0.0000L
0.0138L
+0.209
+0.0082
+0.034
+0.0013
0.034L
0.459L
0.0013L
0.0180L
+0.280
+0.043
0.000
0.0000
0.000L
0.530L
0.0000L
0.0141L
+0.175
+0.0069
0.000
0.0000
0.000L
0.425L
0.0000L
0.0167L
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing O.D.
(1)Tolerance range is from +0 to value listed.
Fit
H8
J6
J7
K6
K7
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
+0.050
+0.0049
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
0.000
0.0000
0.000L
0.125L
0.0000L
0.0079L
+0.040
+0.0016
+0.056
+0.0055
0.000
0.0000
0.000L
0.156L
0.0000L
0.0094L
+0.066
+0.0065
0.000
0.0000
+0.078
+0.0077
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.010
-0.0004
0.010T
0.115L
0.0004T
0.0046L
+0.056
+0.0022
+0.046
+0.0018
-0.010
-0.0004
0.010T
0.146L
0.0004T
0.0057L
0.000L
0.191L
0.0000L
0.0114L
+0.056
+0.0022
-0.010
-0.0004
0.000
0.0000
0.000L
0.238L
0.0000L
0.0104L
+0.068
+0.0027
+0.092
+0.0091
0.000
0.0000
0.000L
0.292L
0.0000L
0.0170L
+0.110
+0.0110
0.000
0.0000
0.000L
0.360L
0.0000L
0.0208L
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.024
-0.0009
0.024T
0.131L
0.0009T
0.0052L
0.000
0.0000
+0.064
+0.0025
-0.026
-0.0010
0.026T
0.164L
0.0010T
0.0064L
0.010T
0.181L
0.0004T
0.0071L
+0.077
+0.0030
-0.028
-0.0011
-0.010
-0.0004
0.010T
0.228L
0.0004T
0.0090L
+0.095
+0.0037
+0.082
+0.0032
-0.010
-0.0004
0.110T
0.282L
0.0004T
0.0111L
+0.100
+0.0039
-0.010
-0.0004
0.010T
0.350L
0.0004T
0.0137L
Fit
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.050
-0.0020
0.050T
0.075L
0.0020T
0.0030L
0.000
0.0000
-0.080
-0.0031
0.080T
0.075L
0.0031T
0.0030L
0.000
0.0000
-0.056
-0.0022
0.056T
0.100L
0.0022T
0.0039L
0.000
0.0000
-0.090
-0.0035
0.090T
0.100L
0.0035T
0.0039L
0.028T
0.202L
0.0011T
0.0079L
0.000
0.0000
-0.066
-0.0026
0.066T
0.125L
0.0026T
0.0049L
0.000
0.0000
-0.105
-0.0041
0.105T
0.125L
0.0041T
0.0049L
-0.030
-0.0012
0.030T
0.255L
0.0012T
0.0100L
0.000
0.0000
-0.078
-0.0031
0.078T
0.160L
0.0031T
0.0063L
0.000
0.0000
-0.125
-0.0049
0.125T
0.160L
0.0049T
0.0063L
+0.118
+0.0046
-0.032
-0.0013
0.032T
0.318L
0.0013T
0.0125L
0.000
0.0000
-0.092
-0.0036
0.092T
0.200L
0.0036T
0.0079L
0.000
0.0000
-0.150
-0.0059
0.150T
0.200L
0.0059T
0.0079L
+0.141
+0.0056
-0.034
-0.0013
0.034T
0.391L
0.0013T
0.0154L
0.000
0.0000
-0.110
-0.0043
0.110T
0.250L
0.0043T
0.0098L
0.000
0.0000
-0.175
-0.0069
0.175T
0.250L
0.0069T
0.0098L
141
Table 73. Radial Ball, Spherical roller and cylindrical roller bearing HOUSING tolerances
Bearing O.D.
Nominal (Max.)
Over
Incl.
mm
in.
mm
in.
10.000
0.3937
Tolerance(1)
M6
M7
N6
N7
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
mm
in.
18.000
0.7087
-0.008
-0.0003
-0.004
-0.0002
18.000
0.7087
30.000
1.1811
-0.009
-0.0035
30.000
1.1811
50.000
1.9685
50.000
1.9685
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.015
-0.0006
0.015T
0.004L
0.0006T
0.0001L
0.000
0.0000
-0.004
-0.0002
-0.017
-0.0007
0.017T
0.005L
0.0007T
0.00015L
-0.011
-0.0045
-0.004
-0.0002
-0.020
-0.0008
80.000
3.1496
-0.013
-0.0005
-0.005
-0.0002
80.000
3.1496
120.000
4.7244
-0.015
-0.0006
120.000
4.7244
150.000
5.9055
150.000
5.9055
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.018
-0.0007
0.018T
0.008L
0.0007T
0.0003L
-0.009
-0.0004
0.000
0.0000
-0.021
-0.0008
0.021T
0.009L
0.0008T
0.0035L
0.020T
0.007L
0.0008T
0.00025L
0.000
0.0000
-0.025
-0.0010
-0.024
-0.0009
0.024T
0.008L
0.0009T
0.0003L
0.000
0.0000
-0.006
-0.0002
-0.028
-0.0011
0.028T
0.009L
0.0011T
0.0004L
-0.018
-0.0007
-0.008
-0.0003
-0.033
-0.0013
180.000
7.0866
-0.025
-0.0010
-0.008
-0.0003
180.000
7.0866
250.000
9.8425
-0.030
-0.0012
250.000
9.8425
315.000
12.4016
315.000
12.4016
Fit
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.020
-0.0008
0.020T
0.001T
0.0008T
0.0001T
-0.005
-0.0002
-0.023
-0.0009
0.023T
0.003L
0.0009T
0.0001L
-0.007
-0.0004
-0.028
-0.0009
0.024T
0.002T
0.0009T
0.00005T
-0.007
-0.0003
-0.028
-0.0011
0.028T
0.002L
0.0011T
0.00005L
0.025T
0.011L
0.0010T
0.00045L
-0.012
-0.0005
-0.028
-0.0011
0.028T
0.001T
0.0011T
0.00005T
-0.008
-0.0003
-0.033
-0.0013
0.033T
0.003L
0.0013T
0.00015L
-0.030
-0.0012
0.030T
0.013L
0.0012T
0.0005L
-0.014
-0.0006
-0.033
-0.0013
0.033T
0.001T
0.0013T
0.0001T
-0.009
-0.0004
-0.039
-0.0015
0.039T
0.004L
0.0015T
0.0001L
0.000
0.0000
-0.035
-0.0014
0.035T
0.015L
0.0014T
0.0006L
-0.016
-0.0006
-0.038
-0.0015
0.038T
0.001T
0.0015T
0.0000T
-0.010
-0.0004
-0.045
-0.0018
0.045T
0.005L
0.0018T
0.0002L
0.033T
0.010L
0.0013T
0.0004L
0.000
0.0000
-0.040
-0.0016
0.040T
0.018L
0.0016T
0.0007L
-0.020
-0.0008
-0.045
-0.0018
0.045T
0.002T
0.0018T
0.0001T
-0.012
-0.0005
-0.052
-0.0020
0.061T
0.018L
0.0020T
0.0002L
-0.033
-0.0013
0.033T
0.017L
0.0013T
0.0007L
0.000
0.0000
-0.040
-0.0016
0.040T
0.025L
0.0016T
0.0010L
-0.020
-0.0008
-0.045
-0.0018
0.045T
0.005T
0.0018T
0.0002T
-0.012
-0.0005
-0.052
-0.0020
0.052T
0.013L
0.0020T
0.0005L
-0.008
-0.0003
-0.037
-0.0015
0.037T
0.022L
0.0015T
0.0009L
0.000
0.0000
-0.046
-0.0018
0.046T
0.030L
0.0018T
0.0012L
-0.022
-0.0009
-0.051
-0.0020
0.051T
0.008T
0.0020T
0.0003T
-0.014
-0.0006
-0.060
-0.0024
0.060T
0.016L
0.0024T
0.0006L
-0.035
-0.0014
-0.009
-0.0004
-0.041
-0.0016
0.041T
0.026L
0.0016T
0.0010L
0.000
0.0000
-0.052
-0.0020
0.052T
0.035L
0.0020T
030014L
-0.025
-0.0010
-0.057
-0.0022
0.057T
0.010T
0.0022T
0.0004T
-0.014
-0.0006
-0.066
-0.0026
0.066T
0.021L
0.0025T
0.0008L
400.000
15.7480
-0.040
-0.0016
-0.010
-0.0004
-0.046
-0.0018
0.046T
0.030L
0.0018T
0.0012L
0.000
0.0000
-0.057
-0.0022
0.057T
0.040L
0.0022T
0.0016L
-0.026
-0.0006
-0.062
-0.0029
0.062T
0.014T
0.0024T
0.0006T
-0.016
-0.0006
-0.073
-0.0029
0.073T
0.024L
0.0029T
0.0010L
400.000
15.7480
500.000
19.6850
-0.045
-0.0018
-0.010
-0.0004
-0.050
-0.0020
0.050T
0.035L
0.0020T
0.0014L
0.000
0.0000
-0.063
-0.0025
0.063T
0.045L
0.0025T
0.0018L
-0.027
-0.0011
-0.067
-0.0026
0.067T
0.018T
0.0026T
0.0007T
-0.017
-0.0007
-0.080
-0.0031
0.080T
0.028L
0.0031T
0.0011L
500.000
19.6850
630.000
24.8032
-0.050
-0.0020
-0.026
-0.0010
-0.070
-0.0028
0.070T
0.024L
0.0028T
0.0010L
-0.026
-0.0010
-0.096
-0.0038
0.096T
0.024L
0.0038T
0.0010L
-0.044
-0.0017
-0.088
-0.0035
0.088T
0.006T
0.0035T
0.0003T
-0.044
-0.0017
-0.114
-0.0045
0.114T
0.006L
0.0045T
0.0003L
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing O.D.
(1)Tolerance range is from +0 to value listed.
142
P6
P7
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
-0.015
-0.0006
Fit
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.026
-0.0010
0.026T
0.007T
0.0010T
0.0003T
-0.011
-0.0004
-0.029
-0.0011
0.029T
0.003T
0.0011T
0.0001T
-0.018
-0.0007
-0.031
-0.0012
0.031T
0.009T
0.0012T
0.00035T
-0.014
-0.0006
-0.035
-0.0014
0.035T
0.005T
0.0014T
0.0025T
-0.021
-0.0008
-0.037
-0.0015
0.037T
0.010T
0.0015T
0.00035T
-0.017
-0.0007
-0.042
-0.0017
0.042T
0.006T
0.0017T
0.0025T
-0.026
-0.0010
-0.045
-0.0018
0.045T
0.013T
0.0018T
0.0005T
-0.021
-0.0008
-0.051
-0.0020
0.051T
0.008T
0.0020T
0.0003T
-0.030
-0.0012
-0.052
-0.0020
0.052T
0.015T
0.0020T
0.0006T
-0.024
-0.0009
-0.059
-0.0023
0.059T
0.009T
0.0023T
0.0003T
-0.036
-0.0014
-0.061
-0.0024
0.061T
0.018T
0.0024T
0.0007T
-0.028
-0.0011
-0.068
-0.0027
0.068T
0.010T
0.0027T
0.0004T
-0.036
-0.0014
-0.061
-0.0024
0.061T
0.011T
0.0024T
0.0004T
-0.028
-0.0011
-0.068
-0.0027
0.068T
0.003T
0.0027T
0.0001T
-0.041
-0.0016
-0.070
-0.0028
0.070T
0.011T
0.0028T
0.0004T
-0.033
-0.0013
-0.079
-0.0031
0.079T
0.003T
0.0031T
0.0001T
-0.047
-0.0019
-0.079
-0.0031
0.079T
0.012T
0.0031T
0.0005T
-0.036
-0.0014
-0.088
-0.0035
0.088T
0.001T
0.0035T
0.0000T
-0.051
-0.0020
-0.087
-0.0034
0.087T
0.011T
0.0034T
0.0004T
-0.041
-0.0016
-0.0039
-0.055
-0.0022
-0.095
-0.0037
0.095T
0.010T
0.0037T
0.0004T
-0.045
-0.0018
-0.108
-0.0043
0.108T
0.000T
0.0043T
0.0000T
-0.078
-0.0031
-0.122
-0.0048
0.122T
0.028T
0.0048T
0.0011T
-0.078
-0.0031
-0.148
-0.0058
0.148T
0.028T
0.0058T
0.0011T
-0.098
0.098T
0.001T
0.0039T
0.0000T
143
Table
73. Radial Ball, Spherical roller and cylindrical roller bearing HOUSING tolerances
Table 73 continued.
Bearing O.D.
Nominal (Max.)
Over
Incl.
mm
in.
mm
in.
630.000
24.8032
Tolerance(1)
M6
M7
N6
N7
Housing Bore
Housing Bore
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
mm
in.
800.000
31.4961
-0.075
-0.0030
-0.030
-0.0012
800.000 1000.000
31.4961 39.3701
-0.100
-0.0039
1000.000 1250.000
39.3701 49.2126
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.080
-0.0031
0.080T
0.045L
0.0031T
0.0018L
-0.030
-0.0012
-0.034
-0.0013
-0.090
-0.0035
0.090T
0.066L
0.0035T
0.0026L
-0.125
-0.0049
-0.040
-0.0016
-0.106
-0.0042
1250.000 1600.000
49.2126 62.9921
-0.160
-0.0063
-0.048
-0.0019
1600.000 2000.000
62.9921 78.7402
-0.200
-0.0079
2000.000 2500.000
78.7402 98.4252
-0.250
-0.0098
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
-0.110
-0.0043
0.110T
0.045L
0.0043T
0.0018L
-0.050
-0.0020
-0.034
-0.0013
-0.124
-0.0049
0.124T
0.066L
0.0049T
0.0026L
0.106T
0.085L
0.0042T
0.0033L
-0.040
-0.0016
-0.145
-0.0057
-0.126
-0.0050
0.126T
0.112L
0.0050T
0.0044L
-0.048
-0.0019
-0.058
-0.0023
-0.150
-0.0059
0.150T
0.142L
0.0059T
0.0056L
-0.068
-0.0027
-0.178
-0.0070
0.178T
0.182L
0.0070T
0.0071L
144
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.100
-0.0039
0.100T
0.025T
0.0039T
0.0010T
-0.050
-0.0020
-0.130
-0.0051
0.130T
0.025L
00051T
0.0010L
-0.056
-0.0022
-0.112
-0.0044
0.112T
0.044T
0.0044T
0.0017T
-0.056
-0.0022
-0.146
-0.0057
0.146T
0.044L
0.0057T
0.0017L
0.145T
0.085L
0.0057T
0.0033L
-0.066
-0.0026
-0.132
-0.0052
0.132T
0.059T
0.0052T
0.0023T
-0.066
-0.0026
-0.171
-0.0067
0.171T
0.059L
0.0067T
0.0023L
-0.173
-0.0068
0.173T
0.112L
0.0068T
0.0044L
-0.078
-0.0031
-0.156
-0.0061
0.156T
0.082T
0.0061T
0.0032T
-0.078
-0.0031
-0.203
-0.0080
0.203T
0.082L
0.0080T
0.0023L
-0.058
-0.0023
-0.208
-0.0082
0.208T
0.142L
0.0082T
0.0056L
-0.092
-0.0036
-0.184
-0.0072
0.184T
0.108T
0.0072T
0.0043T
-0.092
-0.0036
-0.242
-0.0095
0.242T
0.108L
0.0095T
0.0043L
-0.068
-0.0027
-0.243
-0.0096
0.243
0.182L
0.0096T
0.0071L
-0.110
-0.0043
-0.220
-0.0087
0.285T
0.140T
0.112T
0.055T
-0.110
-0.0043
-0.285
-0.0112
0.285T
0.140L
0.0112T
0.0055L
NOTE: Tolerance and shaft diameters are shown in the table as variances from nominal bearing O.D.
(1)Tolerance range is from +0 to value listed.
Fit
P6
P7
Housing Bore
Housing Bore
Max.
Min.
mm
in.
mm
in.
-0.088
-0.0035
Fit
Fit
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
-0.138
-0.0054
0.138T
0.013T
0.0054T
0.0005T
-0.088
-0.0035
-0.168
-0.0066
0.168T
0.013T
0.0066T
0.0005T
-0.100
-0.0039
-0.156
-0.0061
0.156T
0.000T
0.0061T
0.0000T
-0.100
-0.0039
-0.190
-0.0075
0.190T
0.000T
0.0075T
0.0000T
-0.120
-0.0047
-0.186
-0.0073
0.186T
0.005L
0.0073T
0.0002L
-0.120
-0.0047
-0.225
-0.0089
0.225T
0.005T
0.0089T
0.0002T
-0.140
-0.0055
-0.218
-0.0086
0.218T
0.020L
0.0086T
0.0008L
-0.140
-0.0055
-0.265
-0.0104
0.265T
0.020L
0.0104T
0.0008L
-0.170
-0.0067
-0.262
-0.0103
0.262T
0.030L
0.0103T
0.0012L
-0.170
-0.0067
-0.320
-0.0126
0.320T
0.030L
0.0126T
0.0012L
-0.195
-0.0077
-0.305
-0.0120
0.305T
0.055L
0.0120T
0.0021L
-0.195
-0.0077
-0.370
-0.0146
0.370T
0.055L
0.0146T
0.0021L
145
146
Tolerance
Ground Seat
Heavy Loads,
High Speed or Shock
Inner Ring
Seat
Deviation
Resultant
Fit
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
18.000
0.7087
-0.012
0.000
-0.0005
0.0000
+0.018
+0.007
+0.0007
+0.0003
0.030T
0.007T
0.0012T
0.0003T
m6
+0.023
+0.012
+0.0009
+0.0005
0.035T
0.012T
0.0014T
0.0005T
n6
18.000
0.7087
30.000
1.1811
-0.012
0.000
-0.0005
0.0000
+0.021
0.008
+0.0008
+0.0003
0.033T
0.008T
0.0013T
0.0003T
m6
+0.028
+0.015
+0.0011
+0.0006
0.040T
0.015T
0.0016T
0.0006T
n6
30.000
1.1811
50.000
1.9685
-0.012
0.000
-0.0005
0.0000
+0.025
+0.009
+0.0010
+0.0004
0.037T
0.009T
0.0015T
0.0004T
m6
+0.033
+0.017
+0.0013
+0.0007
0.045T
0.017T
0.0018T
0.0007T
n6
50.000
1.9685
80.000
3.1496
-0.015
0.000
-0.0006
0.0000
+0.030
+0.011
+0.0012
+0.0004
0.045T
0.011T
0.0018T
0.0004T
m6
+0.039
+0.020
+0.0015
+0.0008
0.054T
0.020T
0.0021T
0.0008T
n6
80.000
3.1496
120.000
4.7244
-0.020
0.000
-0.0008
0.0000
+0.035
+0.013
+0.0014
+0.0005
0.055T
0.013T
0.0022T
0.0005T
m6
+0.045
+0.023
+0.0019
+0.0010
0.065T
0.023T
0.0027T
0.0010T
n6
120.000
4.7244
180.000
7.0866
-0.025
0.000
-0.0010
0.0000
+0.052
+0.027
+0.0020
+0.0011
0.077T
0.027T
0.0030T
0.0011T
n6
+0.068
+0.043
+0.0027
+0.0017
0.093T
0.043T
0.0037T
0.0017T
p6
180.000
7.0866
200.000
7.8740
+0.106
+0.077
+0.0042
+0.0030
0.136T
0.077T
0.0054T
0.0030T
200.000
7.8740
225.000
8.8583
+0.109
+0.080
+0.0043
+0.0031
0.139T
0.080T
0.0055T
0.0031T
225.000
8.8583
250.000
9.8425
+0.113
+0.084
0.0044
+0.0033
0.143T
0.084T
0.0056T
0.0033T
250.000
9.8425
280.000
11.0236
+0.146
+0.094
+0.0057
+0.0037
0.181T
0.094T
0.0071T
0.0037T
280.000
11.0236
315.000
12.4016
+0.150
+0.098
+0.0059
+0.0039
0.185T
0.098T
0.0073T
0.0039T
Over
Incl.
mm
in.
mm
in.
10.000
0.3937
-0.030
0.000
-0.0012
0.0000
-0.035
0.000
-0.0014
0.0000
+0.060
+0.031
+0.0024
+0.0012
+0.066
+0.033
+0.0026
+0.0013
0.090T
0.031T
0.0035T
0.0012T
0.101T
0.033T
0.0040T
0.0013T
Symbol
n6
n6
Symbol
r6
r7
Ground Seat
Unground Seat
Wheel Spindles
Inner Ring
Seat
Deviation
Resultant
Fit
Inner Ring
Seat
Deviation
Resultant
Fit
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
-0.011
0.0000
-0.0004
0.012T
0.011L
0.0005T
0.0004L
h6
-0.006
-0.017
-0.0002
-0.0007
0.006T
0.017L
0.0002T
0.0007L
g6
-0.006
-0.017
-0.00025
-0.00065
0.006T
0.017L
-0.00025T
0.00065L
g6
-0.016
-0.027
-0.0006
-0.0011
0.004L
0.027L
0.0002L
0.0011L
f6
0.000
-0.013
0.0000
-0.0005
0.012T
0.013L
0.0005T
0.0005L
h6
-0.007
-0.020
-0.0003
-0.0008
0.005T
0.020L
0.0002T
0.0008L
g6
-0.007
-0.020
-0.0003
-0.0008
0.005T
0.020L
0.0002T
0.0008L
g6
-0.020
-0.033
-0.0008
-0.0013
0.008L
0.033L
0.0003L
0.0013L
f6
0.000
-0.016
0.0000
-0.0006
0.012T
0.016L
0.0005T
0.0006L
h6
-0.009
-0.025
-0.0004
-0.0010
0.003T
0.025L
0.0001T
0.0010L
g6
-0.009
-0.025
-0.0004
-0.0010
0.003T
0.025L
0.0001T
0.0010L
g6
-0.025
-0.041
-0.0010
-0.0016
0.013L
0.041L
0.0005L
0.0016L
f6
0.000
-0.019
0.0000
-0.0007
0.015T
0.019L
0.0006T
0.0007L
h6
-0.010
-0.029
-0.0004
-0.0011
0.005T
0.029L
0.0002T
0.0011L
g6
-0.010
-0.029
-0.0004
-0.0011
0.005T
0.029L
0.0002T
0.0011L
g6
-0.030
-0.049
-0.0012
-0.0019
0.015L
0.049L
0.0006L
0.0019L
f6
0.000
-0.022
0.0000
-0.0009
0.020T
0.022L
0.0008T
0.0009L
h6
-0.012
-0.034
-0.0005
-0.0014
0.008T
0.034L
0.0003T
0.0014L
g6
-0.012
-0.034
-0.0005
-0.0014
0.008T
0.034L
0.0003T
0.0014L
g6
-0.036
-0.058
-0.0014
-0.0023
0.016L
0.058L
0.0006L
0.0023L
f6
0.000
-0.025
0.0000
-0.0010
0.025T
0.025L
0.0010T
0.0010L
h6
-0.014
-0.039
-0.0006
-0.0016
0.011T
0.039L
0.0004T
0.0016L
g6
-0.014
-0.039
-0.0006
-0.0016
0.011T
0.039
0.0004T
0.0016L
g6
-0.043
-0.068
-0.0016
-0.0026
0.018L
0.068L
0.0006L
0.0026L
f6
0.000
-0.029
0.0000
-0.0011
0.030T
0.029L
0.0012T
0.0011L
h6
-0.015
-0.044
-0.0006
-0.0017
0.015T
0.044L
0.0006T
0.0017L
g6
-0.015
-0.044
-0.0006
-0.0017
0.015T
0.044L
0.0006T
0.0017L
g6
-0.050
-0.079
-0.0020
-0.0031
0.020L
0.079L
0.0008L
0.0031L
f6
0.000
-0.032
0.0000
-0.0012
0.035T
0.032L
0.0014T
0.0012L
h6
-0.017
-0.049
-0.0007
-0.0019
0.018T
0.049L
0.0007T
0.0019L
g6
-0.017
-0.049
-0.0007
-0.0019
0.018T
0.049L
0.0007T
0.0019L
g6
-0.056
-0.068
-0.0022
-0.0027
0.021L
0.088L
0.0008L
0.0035L
f6
Symbol
Symbol
Symbol
Symbol
147
Inner Ring
Industrial Equipment
Classes K and N (Metric)
148
Tolerance
Over
Incl.
mm
in.
mm
in.
315.000
12.4016
355.000
13.9764
355.000
13.9764
400.000
15.7480
400.000
15.7580
450.000
17.7165
450.000
17.7165
500.000
19.6850
500.000
29.6850
mm
in.
-0.040
0.000
-0.0016
0.0000
Ground Seat
Heavy Loads,
High Speed or Shock
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
+0.073
+0.037
+0.0029
+0.0015
0.113T
0.037T
0.0044T
0.0015T
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
+0.165
+0.108
+0.0065
+0.0043
0.205T
0.108T
0.0081T
0.0043T
+0.171
+0.114
+0.0067
+0.0045
0.211T
0.114T
0.0083T
0.0045T
+0.189
+0.126
+0.0074
+0.0092
0.234T
0.126T
0.0092T
0.0050T
+0.195
+0.132
+0.0077
+0.0052
0.240T
0.132T
0.0094T
0.0052T
+0.200
+0.125
+0.0079
+0.0049
0.250T
0.125T
0.0098T
0.0049T
0.305T
0.105T
0.0102T
0.0041T
0.375T
0.175T
0.0148T
0.0069T
Symbol
n6
-0.045
0.000
-0.0018
0.0000
+0.080
+0.040
+0.0031
+0.0016
0.0125T
0.040T
0.0049T
0.0016T
630.000
24.8032
-0.050
0.000
-0.0020
0.0000
+0.100
+0.050
+0.0039
+0.0020
0.150T
0.050T
0.0059T
0.0020T
630.000
24.8032
800.000
31.4961
-0.080
0.000
-0.0031
0.0000
+0.125
+0.050
+0.0049
+0.0020
0.205T
0.050T
0.0081T
0.0020T
+0.225
+0.150
+0.0089
+0.0059
800.000
31.4961
1000.000
39.3701
-0.100
0.000
-0.0039
0.0000
+0.150
+0.050
+0.0059
+0.0020
0.250T
0.050T
0.0098T
0.0020T
+0.275
+0.175
+0.0108
+0.0069
n6
Symbol
r7
r7
Ground Seat
Unground Seat
Wheel Spindles
Inner Ring
Seat
Deviation
Resultant
Fit
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
0.000
-0.036
0.0000
-0.0014
0.040T
0.036L
0.0016T
0.0014L
h6
-0.018
-0.075
-0.0007
-0.0030
0.022T
0.075L
0.0009T
0.0030L
0.000
-0.040
0.0000
-0.0020
0.045T
0.040L
0.0018T
0.0016L
h6
-0.020
-0.083
-0.0008
-0.0033
0.025T
0.083L
0.0008T
0.0033L
0.000
-0.050
0.0000
-0.0020
0.050T
0.050L
0.0020T
0.0020L
-0.050
-0.100
-0.0020
-0.0039
0.000
0.100L
0.0000
0.0039L
0.000
-0.075
0.0000
-0.0030
0.080T
0.075L
0.0031T
0.0030L
-0.080
-0.150
-0.0031
-0.0059
0.000
-0.100
0.0000
-0.0039
0.100T
0.100L
0.0039T
0.0039L
-0.100
-0.200
-0.0039
-0.0079
Symbol
Inner Ring
Seat
Deviation
Resultant
Fit
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
g7
-0.018
-0.075
-0.0007
-0.0029
0.022T
0.075L
0.0009T
0.0029L
g7
g7
-0.020
-0.083
-0.0008
-0.0033
0.025T
0.083L
0.0008T
0.0033L
g7
-0.050
-0.100
-0.0020
-0.0039
0.000
0.100L
0.0000
0.0039L
0.000
0.150L
0.0000
0.0059L
-0.080
-0.150
-0.0031
-0.0059
0.000
0.150L
0.0000
0.0059L
0.000
0.200L
0.0000
0.0079L
-0.100
-0.200
-0.0039
-0.0079
0.000
0.200L
0.0000
0.0079L
Symbol
Symbol
Symbol
149
Outer Ring
Industrial Equipment
Classes K and N (Metric)
Table 75. Tapered Roller Bearings outer Ring Industrial Equipment Classes K and N (Metric)
Outer Ring O.D.
Range
Tolerance
Stationary Cup
Rotating Cup
Adjustable
Nonadjustable or in Carriers or
Sheaves - Clamped
Floating or Clamped
Outer Ring
Resultant
Seat
Fit
Deviation
Symbol
Outer Ring
Resultant
Seat
Fit
Deviation
Nonadjustable or in Carriers
Symbol
Outer Ring
Resultant
Seat
Fit
Deviation
Symbol
Outer Ring
Resultant
Seat
Fit
Deviation
Symbol
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
18.000
0.7087
30.000
1.1811
0.000
-0.012
0.0000
-0.0005
+0.007
+0.028
+0.0003
+0.0011
0.007L
0.040L
0.0003L
0.0016L
G7
-0.009
+0.012
-0.0004
+0.0005
0.009T
0.024L
0.0004T
0.0009L
J7
-0.035
-0.014
-0.0014
-0.0005
0.035T
0.002T
0.0014T
0.0001T
P7
-0.041
-0.020
-0.0016
-0.0009
0.041T
0.008T
0.0016T
0.0003T
R7
30.000
1.1811
50.000
1.9685
0.000
-0.014
0.0000
-0.0006
+0.009
+0.034
+0.0004
+0.0013
0.009L
0.048L
0.0004L
0.0019L
G7
-0.011
+0.014
-0.0004
+0.0006
0.011T
0.028L
0.0004T
0.0011L
J7
-0.042
-0.017
-0.0017
-0.0007
0.042T
0.003T
0.0017T
0.0001T
P7
-0.050
-0.025
-0.0020
-0.0010
0.050T
0.011T
0.0020T
0.0004T
R7
50.000
1.9685
65.000
2.5591
-0.060
-0.030
-0.0024
-0.0012
0.060T
0.014T
0.0024T
0.0006T
-0.062
-0.032
-0.0021
-0.0013
0.062T
0.016T
0.0024T
0.0006T
-0.073
-0.038
-0.0029
-0.0015
0.073T
0.020T
0.0029T
0.0008T
-0.076
-0.041
-0.0030
-0.0016
0.076T
0.023T
0.0030T
0.0009T
-0.088
-0.048
-0.0035
-0.0019
0.088T
0.028T
0.0035T
0.0011T
-0.090
-0.050
-0.0035
-0.0020
0.090T
0.030T
0.0035T
0.0012T
-0.090
-0.050
-0.0035
-0.0020
0.090T
0.025T
0.0035T
0.0010T
-0.093
-0.053
-0.0037
-0.0021
0.093T
0.028T
0.0037T
0.0011T
65.000
2.5591
80.000
3.1496
80.000
3.1496
100.000
3.9370
100.000
3.9370
120.000
4.7244
120.000
4.7244
140.000
5.5188
140.000
5.5188
150.000
5.9055
150.000
5.9055
160.000
6.2992
160.000
6.2992
180.000
7.0866
0.000
-0.016
0.0000
-0.0006
0.000
-0.018
0.0000
-0.0007
0.000
-0.020
0.0000
-0.0008
0.000
-0.025
0.0000
-0.0010
+0.010
+0.040
+0.0004
+0.0016
+0.012
+0.047
+0.0005
+0.0019
+0.014
+0.054
+0.0006
+0.0021
+0.014
+0.054
+0.0006
+0.0021
0.010L
0.056L
0.0004L
0.0022L
0.012L
0.065L
0.0005L
0.0026L
0.014L
0.074L
0.0006L
0.0029L
0.014L
0.079L
0.0006L
0.0031L
G7
G7
G7
G7
-0.012
+0.018
-0.0005
+0.0007
-0.013
+0.022
-0.0005
+0.0009
-0.014
+0.026
-0.0006
+0.0010
-0.014
+0.026
-0.0006
+0.0010
0.012T
0.034L
0.0005T
0.0013L
0.013T
0.040L
0.0005T
0.0016L
0.014T
0.046L
0.0006T
0.0018L
-0.014T
0.051L
0.0006T
0.0020L
J7
J7
J7
J7
-0.051
-0.021
-0.0020
-0.0008
-0.059
-0.024
-0.0023
-0.0009
-0.068
-0.028
-0.0027
-0.0011
-0.068
-0.028
-0.0027
-0.0011
0.051T
0.005T
0.0020T
0.0002T
0.059T
0.006T
0.0023T
0.0002T
0.068T
0.074T
0.0027T
0.0003T
0.068T
0.003T
0.0027T
0.0001T
P7
P7
P7
P7
R7
R7
R7
R7
150
Table 75 continued.
Tolerance
Over
Incl.
mm
in.
mm
in.
180.000
7.0866
200.000
7.8740
200.000
7.8740
225.000
8.8583
225.000
8.8583
250.000
9.8425
Rotating Cup
Adjustable
Nonadjustable or in Carriers or
Sheaves - Clamped
Floating or Clamped
Outer Ring
Resultant
Seat
Fit
Deviation
Symbol
250.000
9.8425
-0.113
-0.067
-0.0044
-0.0026
0.113T
0.037T
0.0044T
0.0015T
280.000
11.0236
-0.126
-0.074
-0.0050
-0.0029
0.126T
0.039T
0.0050T
0.0015T
-0.130
-0.078
-0.0051
-0.0031
0.130T
0.043T
0.0051T
0.0017T
-0.144
-0.087
-0.0057
-0.0034
0.144T
0.047T
0.0057T
0.0019T
-0.150
-0.093
-0.0059
-0.0037
0.150T
0.053T
0.0059T
0.0021T
-0.166
-0.103
-0.0065
-0.0041
0.166T
0.058T
0.0065T
0.0023T
-0.172
-0.109
-0.0068
-0.0043
0.172T
0.064T
0.0068T
0.0025T
0.190T
0.070T
0.0075T
0.0028T
R7
315.000
12.4016
315.000
12.4016
355.000
13.9764
355.000
13.9764
400.000
15.7480
400.000
15.7480
450.000
17.7165
0.000
-0.035
0.0000
-0.0014
0.000
-0.040
0.0000
-0.0016
+0.017
+0.069
+0.0007
+0.0027
+0.062
+0.098
+0.0024
+0.0039
0.017L
0.104L
0.0007L
0.0041L
0.062L
0.138L
0.0024L
0.0054L
0.000
-0.045
0.0000
-0.0018
+0.068
+0.095
+0.0027
+0.0037
0.068L
0.140L
0.0027L
0.0055L
450.000
17.7165
500.000
19.6850
500.000
19.6850
630.000
24.8032
0.000
-0.050
0.0000
-0.0020
+0.065
+0.115
+0.0026
+0.0045
0.065L
0.165L
0.0026L
0.0065L
630.000
24.8032
800.000
31.4961
0.000
-0.080
0.0000
-0.0031
+0.075
+0.150
+0.0030
+0.0059
0.075L
0.225L
0.0030L
0.0089L
800.000
31.4961
1000.000
39.3701
0.000
-0.100
0.0000
-0.0039
+0.075
+0.175
+0.0030
+0.0069
0.075L
0.275L
0.0030L
0.0108L
G7
G7
F6
-0.016
+0.036
-0.0006
+0.0013
-0.018
+0.039
-0.0007
+0.0015
0.016T
0.071L
0.0006T
0.0028L
0.018T
0.079L
0.0007T
0.0031L
F5
-0.020
+0.043
-0.0008
+0.0017
0.020T
0.088L
0.0008T
0.0035L
-0.022
+0.046
-0.0009
+0.0018
0.022T
0.096L
0.0009T
0.0038L
-0.025
+0.050
-0.0098
+0.0020
0.025T
0.130L
0.0098T
0.0051L
-0.025
+0.075
-0.0098
+0.0030
0.025T
0.175L
0.0098T
0.0069L
J7
J7
J7
-0.079
-0.033
-0.0031
-0.0014
-0.088
-0.036
-0.0035
-0.0014
-0.098
-0.041
-0.0039
-0.0016
mm
in.
Outer Ring
Resultant
Seat
Fit
Deviation
0.109T
0.033T
0.0043T
0.0013T
0.016T
0.060L
0.0006T
0.0024L
mm
in.
Symbol
-0.109
-0.063
-0.0043
-0.0025
-0.016
+0.030
-0.00076
+0.0012
mm
in.
Outer Ring
Resultant
Seat
Fit
Deviation
0.106T
0.030T
0.0042T
0.0012T
0.015L
0.091L
0.0006L
0.0036L
mm
in.
Symbol
-0.106
-0.060
-0.0042
-0.0024
+0.015
+0.061
+0.0006
+0.0024
mm
in.
Outer Ring
Resultant
Seat
Fit
Deviation
mm
in.
0.000
-0.030
0.0000
-0.0012
mm
in.
Symbol
Nonadjustable or in Carriers
mm
in.
280.000
11.0236
mm
in.
Stationary Cup
0.079T
0.003T
0.0031T
0.0001T
0.088T
0.001T
0.0035T
0.0000
0.098T
0.001T
0.0039T
0.0001T
P7
P7
P7
R7
R7
R7
J7
-0.108
-0.045
-0.0043
-0.0018
0.108T
0.000
0.0043T
0.0000
-0.118
-0.050
-0.0046
-0.0020
0.118T
0.000
0.0046T
0.0000
-0.190
-0.120
-0.0075
-0.0047
-0.150
-0.075
-0.0059
-0.0030
0.150T
0.000
0.0059T
0.0000
R7
-0.200
-0.100
-0.0079
-0.0039
0.200T
0.000
0.0079T
0.0000
R7
P7
R7
151
Inner ring
Industrial Equipment
Classes 4 and 2 (Inch)
Table 76. Tapered Roller Bearings Inner Ring Industrial Equipment Classes 4 and 2 (Inch)
Inner Ring Bore
Range
Rotating or
Stationary Inner Ring
Ground Seat
Unground or
Ground Seat
Heavy Loads, or
Tolerance(1) Constant Loads With
Moderate Shock High Speed Or Shock
Ground Seat
Unground Seat
Hardened and
Ground Seat
Moderate Loads,
No Shock
Moderate Loads,
No Shock
Sheaves,
Wheels, Idlers
Wheel Spindles
Inner Ring
Inner Ring
Inner Ring
Inner Ring
Inner Ring
Inner Ring
Resultant
Resultant
Resultant
Resultant
Resultant
Resultant
Seat
Seat
Seat
Seat
Seat
Seat
Fit
Fit
Fit
Fit
Fit
Fit
Deviation
Deviation
Deviation
Deviation
Deviation
Deviation
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
76.200
3.0000
0.000
+0.013
0.0000
+0.0005
+0.038(2)
+0.026
+0.0015
+0.0010
0.038T
0.012T
0.0015T
0.0005T
+0.064
+0.038
+0.0025
+0.0015
0.064T
0.025T
0.0025T
0.0010T
+0.013
0.000
+0.0005T
0.0000
0.013T
0.013L
0.0005T
0.0005L
0.000
-0.013
0.0000
-0.0005
0.000
0.026L
0.0000
0.0010L
0.000
-0.013
0.0000
-0.0005
0.000
0.026L
0.0000
0.0010L
-0.005
-0.018
-0.0002
-0.0007
0.005L
0.031L
0.0002L
0.0012L
76.200
3.0000
304.800
12.0000
0.000
+0.025
0.0000
+0.0010
+0.064
+0.038
+0.0025
+0.0015
0.064T
0.013T
0.0025T
0.0005T
+0.025
0.000
+0.0010
0.0000
0.025T
0.025L
0.0010T
0.0010L
0.000
-0.025
0.0000
-0.0010
0.000
0.051L
0.0000
0.0020L
0.000
-0.025
0.0000
-0.0010
0.000
0.051L
0.0000
0.0020L
-0.005
-0.031
-0.0002
-0.0012
0.005L
0.056L
0.0002L
0.0022L
304.800 609.600
12.0000 24.0000
0.000
+0.051
0.0000
+0.0020
+0.127
+0.076
+0.0050
+0.0030
0.127T
0.025T
0.0050T
0.0010T
+0.051
0.000
+0.0020
0.0000
0.051T
0.051L
0.0020T
0.0020L
0.000
-0.051
0.0000
-0.0020
0.000
0.102L
0.0000
0.0040L
0.000
-0.051
0.0000
-0.0020
0.000
0.102L
0.0000
0.0040L
609.600 914.400
24.0000 36.0000
0.000
+0.076
0.0000
+0.0030
+0.191
+0.114
+0.0075
+0.0015T
+0.076
0.000
+0.0030
0.0000
0.076T
0.076L
0.0030T
0.0030L
0.000
-0.076
0.0000
-0.0030
0.000
0.152L
0.0000
0.0060L
0.000
-0.076
0.0000
-0.0030
0.000
0.152L
0.0000
0.0060L
(2)Example: If the minimum inner ring bore is 76.200 mm (3.0000 in.) the suggested shaft size = 76.238 mm (3.0015 in.) to 76.225 mm (3.0010 in.)
for an inner ring fit of 0.038 mm (0.0015 in.) tight to 0.012 mm (0.0005 in.) tight.
(3)For inner ring bores between 76.200 mm (3.0000 in.) and 101.600 mm (4.0000 in.) use a minimum fit of 0.025 mm (0.0001 in.) tight.
152
Outer Ring
Industrial Equipment
Classes 4 and 2 (Inch)
Table 77. Tapered Roller Bearings outer Ring Industrial Equipment Classes 4 and 2 (Inch)
Outer Ring O.D.
Range
Floating or Clamped
Adjustable
Stationary Or Rotating
Outer Ring
Non-adjustable or In Carriers,
Sheaves - Clamped
Sheaves - Unclamped(1)
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant Fit
Outer Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
76.200
3.0000
+0.025
0.000
+0.0010
0.0000
+0.050
+0.076
+0.0020
+0.0030
0.026L
0.076L
0.0010L
0.0030L
0.000
+0.025
0.0000
+0.0010
0.025T
0.025L
0.0010T
0.0010L
-0.039
-0.013
-0.0015
-0.0005
0.064T
0.013T
0.0025T
0.0005T
-0.077
-0.051
-0.0030
-0.0020
0.102T
0.051T
0.0040T
0.0020T
76.200
3.0000
127.000
5.0000
+0.025
0.000
+0.0010
0.0000
+0.050
+0.076
+0.0020
+0.0030
0.026L
0.076L
0.0010L
0.0030L
0.000
+0.025
0.0000
+0.0010
0.025T
0.025L
0.0010T
0.0010L
-0.051
-0.025
-0.0020
-0.0010
0.076T
0.025T
0.0030T
0.0010T
-0.077
-0.051
-0.0030
-0.0020
0.102T
0.051T
0.0040T
0.0020T
127.000
5.0000
304.800
12.0000
+0.025
0.000
+0.0010
0.0000
+0.050
+0.076
+0.0020
+0.0030
0.026L
0.076L
0.0010L
0.0030L
0.000
+0.051
0.0000
+0.0020
0.025T
0.051L
0.0010T
0.0020L
-0.051
-0.025
-0.0020
-0.0010
0.076T
0.025T
0.0030T
0.0010T
-0.077
-0.051
-0.0030
-0.0020
0.102T
0.051T
0.0040T
0.0020T
304.800
12.0000
609.600
24.0000
+0.051
0.000
+0.0020
0.0000
+0.102
+0.152
+0.0040
+0.0060
0.051L
0.152L
0.0020L
0.0060L
+0.026
+0.076
+0.0010
+0.0030
0.025T
0.076L
0.0010T
0.0030L
-0.076
-0.025
-0.0030
-0.0010
0.127T
0.025T
0.0050T
0.0010T
-0.102
-0.051
-0.0040
-0.0020
0.153T
0.051T
0.0060T
0.0020T
609.600
24.0000
914.400
36.0000
+0.076
0.000
+0.0030
0.0000
+0.152
+0.229
+0.0060
+0.0090
0.076L
0.229L
0.0030L
0.0090L
+0.051
+0.127
+0.0020
+0.0050
0.025T
0.0127L
0.0010T
0.0050L
-0.102
-0.025
-0.0040
-0.0010
0.178T
0.025T
0.0070T
0.0010T
Over
Incl.
mm
in.
mm
in.
0.000
0.0000
(1)Unclamped outer ring design is applicable only to sheaves with negligible fleet angle.
153
Inner ring
Automotive Equipment
Class 4 and 2 (Inch)
Deviation from nominal (minimum)
bearing bore and resultant fit.
T= Tight
L = Loose
Rear Wheels
(Unit-Bearing)
(Semi-Floating Axles)
Non-adjustable
Shaft O.D.
Deviation
Resultant
Fit
Shaft O.D.
Deviation
Resultant
Fit
Shaft O.D.
Deviation
Resultant
Fit
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
76.200
3.0000
0.000
+0.0013
0.0000
+0.0005
-0.005
-0.018
-0.0002
-0.0007
0.005L
0.031L
0.0002L
0.0012L
+0.051
+0.038
+0.0020
+0.0015
0.051T
0.025T
0.0020T
0.0010T
+0.056
+0.038
+0.0022
+0.0015
0.056T
0.025T
0.0022T
0.0010T
76.200
3.0000
304.800
12.0000
0.000
+0.0025
0.0000
+0.0010
-0.0013
-0.038
-0.0050
-0.0015
0.013L
0.063L
0.0005L
0.0025L
+0.076
+0.051
+0.0030
+0.0020
0.076T
0.026T
0.0030T
0.0010T
Outer Ring
Automotive Equipment
Classes 4 and 2 (Inch)
Housing Bore
Rotating Outer Ring
Front
Wheels
Rear Wheels
(Full-Floating
Trailer Wheels)
Non-adjustable
154
Housing Bore
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
76.200
3.0000
+0.025
0.000
+0.0010
0.0000
-0.051
-0.013
-0.0020
-0.0005
0.076T
0.013T
0.0030T
0.0005T
76.200
3.0000
127.000
5.0000
+0.025
0.000
+0.0010
0.0000
-0.077
-0.025
-0.0030
-0.0010
0.102T
0.025T
0.0040T
0.0010T
127.000
5.0000
304.800
12.0000
+0.025
0.000
+0.0010
0.0000
-0.077
-0.025
-0.0030
-0.0010
0.102T
0.025T
0.0040T
0.0010T
Over
Incl.
mm
in.
mm
in.
0.000
0.0000
Shaft O.D.
Rotating Inner Ring
Pinion
Clamped
Transaxles
Transmissions
Transfer Cases
Cross Shafts
Differential
Collapsible Spacer
Non-adjustable
Non-adjustable
Non-adjustable
Shaft O.D.
Deviation
Resultant
Fit
Shaft O.D.
Deviation
Resultant
Fit
Shaft O.D.
Deviation
Resultant
Fit
Shaft O.D.
Deviation
Resultant
Fit
Shaft O.D.
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
+0.025
+0.013
+0.0010
+0.0005
0.025T
0.000
0.0010T
0.0000
+0.030
+0.018
+0.0012
+0.0007
0.030T
0.005T
0.0012T
0.0002T
+0.051
+0.038
+0.0020
+0.0015
0.051T
0.025T
0.0020T
0.0010T
+0.102
+0.064
+0.0040
+0.0025
0.102T
0.051T
0.0040T
0.0020T
+0.038
+0.025
+0.0015
+0.0010
0.038T
0.012T
0.0015T
0.0005T
+0.038
+0.013
+0.0015
+0.0005
0.038T
0.012T
0.0015T
0.0005T
+0.076
+0.051
+0.0030
+0.0020
0.076T
0.026T
0.0030T
0.0010T
+0.102
+0.076
+0.0040
+0.0025
0.102T
0.051T
0.0040T
0.0020T
+0.064
+0.038
+0.0025
+0.0015
0.064T
0.013T
0.0025T
0.0005T
Housing Bore
Stationary Outer Ring
Rear
Wheels
(Semi-Floating
Axles)
Differential
Adjustable (TS)
Clamped (TSU)
(Split Seat)
Transmissions
Adjustable
Transfer Cases
Cross Shafts
Pinion
(Solid Seat)
Transmission
Adjustable
Differential
Transaxles
Transfer Cases
Non-adjustable
Housing Bore
Deviation
Resultant
Fit
Housing Bore
Deviation
Resultant
Fit
Housing Bore
Deviation
Resultant
Fit
Housing Bore
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
+0.038
+0.076
+0.0015
+0.0030
0.013L
0.076L
0.0005L
0.0030L
+0.025
+0.051
+0.0010
+0.0020
0.000
0.051L
0.0000
0.0020L
0.000
+0.025
0.000
+0.0010
0.025T
0.025L
0.0010T
0.0010L
-0.038
-0.013
-0.0015
-0.0005
0.063T
0.013T
0.0025T
0.0005T
+0.038
+0.076
+0.0015
+0.0030
0.013L
0.076L
0.0005L
0.0030L
+0.025
+0.051
+0.0010
+0.0020
0.000
0.051L
0.0000
0.0020L
0.000
+0.025
0.0000
+0.0010
0.025T
0.025L
0.0010T
0.0010L
-0.051
-0.025
-0.0020
-0.0010
0.076T
0.025T
0.0030T
0.0010T
0.000
+0.051
0.0000
+0.0020
0.025T
0.051L
0.0010T
0.0020L
0.000
+0.051
0.0000
+0.0020
0.025T
0.051L
0.0010T
0.0020L
-0.077
-0.025
-0.0030
-0.0010
0.102T
0.025T
0.0040T
0.0010T
155
Front Wheels
Rear Wheel
(Full-Floating Axles)
Trailer Wheels
Non-adjustable
156
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
18.000
0.7087
30.000
1.1811
-0.012
0.000
-0.0005
0.0000
-0.020
-0.033
-0.0008
-0.0013
0.008L
0.033L
0.0003L
0.0013L
30.000
1.1811
50.000
1.9685
-0.012
0.000
-0.0005
0.0000
-0.025
-0.041
-0.0010
-0.0016
50.000
1.9685
80.000
3.1496
-0.015
0.000
-0.0006
0.0000
80.000
3.1496
120.000
4.7244
120.000
4.7244
180.000
7.0866
Rear Wheels
(Unit-Bearing)
(Semi-Floating Axles)
Rear Wheels
(Semi-Floating Axles)
Non-adjustable
Symbol
mm
in.
f6
+0.035
+0.022
+0.0013
+0.0008
0.047T
0.022T
0.0018T
0.0008T
0.013L
0.041L
0.0005L
0.0016L
f6
+0.042
+0.026
+0.0016
+0.0010
-0.030
-0.049
-0.0012
-0.0019
0.015L
0.049L
0.0006L
0.0019L
f6
-0.020
0.000
-0.0008
0.0000
-0.035
-0.058
-0.0014
-0.0023
0.016L
0.058L
0.0006L
0.0023L
-0.025
0.000
-0.0010
0.0000
-0.043
-0.068
-0.0016
-0.0026
0.018L
0.068L
0.0006L
0.0026L
Non-adjustable
Symbol
Symbol
mm
in.
mm
in.
p6
+0.035
+0.022
+0.0013
+0.0008
0.047T
0.022T
0.0018T
0.0008T
p6
0.054T
0.026T
0.0021T
0.0010T
p6
+0.042
+0.026
+0.0016
+0.0010
0.054T
0.026T
0.0021T
0.0010T
p6
+0.051
+0.032
+0.0021
+0.0014
0.066T
0.032T
0.0027T
0.0014T
p6
f6
+0.045
+0.023
+0.0019
+0.0010
0.065T
0.023T
0.0027T
0.0010T
n6
f6
+0.052
+0.027
+0.0022
+0.0012
0.077T
0.029T
0.0032T
0.0012T
n6
Shaft O.D.
Rotating Inner Ring
Pinion
Clamped
Shaft O.D. Resultant
Deviation
Fit
mm
in.
mm
in.
+0.015
+0.002
+0.0006
+0.0001
0.027T
0.002T
0.0011T
0.0001T
+0.018
+0.002
+0.0007
+0.0001
Collapsible Spacer
Symbol
mm
in.
k6
+0.015
+0.002
+0.0006
+0.0001
0.027T
0.002T
0.0011T
0.0001T
0.030T
0.002T
0.0012T
0.0001T
k6
+0.018
+0.002
+0.0007
+0.0001
+0.021
+0.002
+0.0008
-0.0001
0.036T
0.002T
0.0014T
0.0001L
k6
+0.013
-0.009
+0.0005
-0.0004
0.033T
0.009L
0.0013T
0.0004L
j6
+0.014
-0.011
+0.0006
-0.0004
0.039T
0.011L
0.0016T
0.0004L
j6
Non-adjustable
Symbol
mm
in.
k6
+0.035
+0.022
+0.0013
+0.0009
0.047T
0.022T
0.0018T
0.0009T
0.030T
0.002T
0.0012T
0.0001T
k6
+0.042
+0.026
+0.0016
+0.0010
+0.021
+0.002
+0.0008
+0.0001
0.036T
0.002T
0.0014T
0.0001L
k6
Symbol
Differential
Transaxles, Transmissions
Transfer Cases, Cross Shafts
Non-adjustable
Non-adjustable
Symbol
mm
in.
mm
in.
mm
in.
mm
in.
p6
+0.056
+0.035
+0.0022
+0.0014
0.068T
0.035T
0.0027T
0.0014T
+0.021
+0.008
+0.0008
+0.0003
0.033T
0.008T
0.0013T
0.0003T
m6
0.054T
0.026T
0.0021T
0.0010T
p6
+0.068
+0.043
+0.0028
+0.0018
0.080T
0.043T
0.0033T
0.0018T
+0.025
+0.009
+0.0010
+0.0004
0.037T
0.009T
0.0015T
0.0004T
m6
+0.051
+0.032
+0.021
+0.014
0.066T
0.032T
0.0027T
0.0014T
p6
+0.0089
+0.059
+0.0034
+0.0022
0.104T
0.059T
0.0040T
0.0022T
+0.030
+0.011
+0.0012
+0.0004
0.045T
0.011T
0.0018T
0.0004T
m6
+0.045
+0.023
+0.0019
+0.0010
0.065T
0.023T
0.0027T
0.0010T
n6
+0.114
+0.079
+0.0044
+0.0030
0.134T
0.079T
0.0052T
0.0030T
+0.035
+0.013
+0.0014
+0.0005
0.055T
0.013T
0.0022T
0.0005T
m6
+0.052
+0.028
+0.0022
+0.0012
0.077T
0.029T
0.0032T
0.0012T
n6
+0.140
+0.100
+0.0056
+0.0040
0.165T
0.100T
0.0066T
0.0040T
+0.040
+0.015
+0.0016
+0.0006
0.066T
0.015T
0.0026T
0.0006T
157
T= Tight
L = Loose
TABLE 81. Tapered roller bearingS Outer Ring Automotive Equipment Classes K and N (Metric)
Housing Bore
Rotating Outer Ring
Outer Ring
O.D.
Tolerance
Over
Incl.
mm
in.
mm
in.
Rear Wheels
(Semi-Floating Axles)
Differential
(Split Seat)
Transmissions
Transfer Cases
Cross Shafts
Pinion Differential
(Solid Seat) Transaxles
Transmission(1)
Transfer Cases
Non-adjustable
Adjustable (TS)
Clamped (TSU)
Adjustable
Adjustable
Non-adjustable
Housing
Housing
Housing
Housing
Housing
Resultant
Resultant
Resultant
Resultant
Resultant
Bore
Symbol Bore
Symbol Bore
Symbol Bore
Symbol Bore
Symbol
Fit
Fit
Fit
Fit
Fit
Deviation
Deviation
Deviation
Deviation
Deviation
mm
in.
mm
in.
mm
in.
30.000 50.000
1.1811 1.9685
0.000
-0.014
0.0000
-0.0006
-0.050
-0.025
-0.0020
-0.0010
0.050T
0.011T
0.0020T
0.0004T
50.000 65.000
1.9685 2.5591
0.000
-0.016
0.0000
-0.0006
-0.060
-0.030
-0.0023
-0.0011
0.060T
0.014T
0.0023T
0.0005T
65.000 80.000
2.5591 3.1496
0.000
-0.016
0.0000
-0.0006
-0.062
-0.032
-0.0023
-0.0011
0.062T
0.016T
0.0023T
0.0005T
80.000 100.000
3.1496 3.9370
0.000
-0.018
0.0000
-0.0007
-0.073
-0.038
-0.0029
-0.0015
0.073T
0.020T
0.0029T
0.0008T
100.000 120.000
3.9370 4.7244
0.000
-0.018
0.0000
-0.0007
-0.076
-0.041
-0.0029
-0.0015
0.076T
0.023T
0.0029T
0.0008T
120.000 140.000
4.7244 5.5118
0.000
-0.020
0.0000
-0.0008
-0.088
-0.048
-0.0035
-0.0019
0.088T
0.028T
0.0035T
0.0011T
140.000 150.000
5.5118 5.9055
0.000
-0.020
0.0000
-0.0008
-0.090
-0.050
-0.0035
-0.0019
0.090T
0.030T
0.0035T
0.0011T
150.000 160.000
5.9055 6.2992
0.000
-0.025
0.0000
-0.0010
-0.090
-0.050
-0.0035
-0.0019
0.090T
0.025T
0.0035T
0.0009T
0.000
-0.025
0.0000
-0.0010
-0.093
-0.053
-0.0035
-0.0019
0.093T
0.028T
0.0035T
0.0009T
160.000 180.000
6.2992 7.0866
Front Wheels
Rear Wheels
(Full-Floating
Trailer Wheels)
mm
in.
R7
R7
R7
R7
R7
mm
in.
+0.009 0.009L
+0.034 0.048L
+0.0004 0.0004L
+0.0014 0.0020L
+0.010 0.010L
+0.040 0.056L
+0.0004 0.0004L
+0.0016 0.0022L
+0.012 0.012L
+0.047 0.065L
+0.0005 0.0005L
+0.0029 0.0026L
+0.014 0.014L
+0.054 0.074L
+0.0006 0.0006L
+0.0022 0.0030L
+0.014 0.014L
+0.054 0.079L
+0.0006 0.0006L
+0.0022 0.0032L
mm
in.
G7
G7
G7
G7
G7
mm
in.
0.000
0.000
+0.025 0.039L
0.0000 0.0000
+0.0010 0.0016L
0.000
0.000
+0.030 0.046L
0.0000 0.0000
+0.0012 0.0018L
0.000
0.000
+0.035 0.053L
0.0000 0.0000
+0.0014 0.0021L
-0.014 0.014T
+0.026 0.046L
-0.0006 0.0006L
+0.0010 0.0018L
-0.014 0.014T
+0.026 0.051L
-0.0006 0.0006T
+0.0010 0.0020L
mm
in.
H7
H7
H7
J7
J7
-0.013 0.013T
+0.003 0.017L
-0.0005 0.0005T
+0.0001 0.0007L
-0.015 0.015T
+0.004 0.020L
-0.0006 0.0006T
+0.0001 0.0007L
-0.018 0.018T
+0.004 0.022L
-0.0007 0.0007T
+0.0002 0.0009L
-0.021 0.021T
+0.004 0.024L
-0.0008 0.0008T
+0.0002 0.0010L
-0.021 0.021T
+0.004 0.029L
-0.0008 0.0008T
+0.0002 0.0012L
(1)Aluminum housings min. fit of 0.025 mm (0.001 in.) per inch of outer ring O.D. Magnesium housing min. fit of 0.038 mm (0.0015 in.)
158
mm
in.
mm
in.
K6
K6
K6
K6
K6
mm
in.
-0.050 0.050T
-0.025 0.011T
-0.0020 0.0020T
-0.0010 0.0004T
-0.060
0.060
-0.030 0.014T
-0.0023 0.0023T
-0.0011 0.0005T
-0.062 0.062T
-0.032 0.016T
-0.0023 0.0023T
-0.0011 0.0005T
-0.073 0.073T
-0.038 0.020T
-0.0029 0.0029T
-0.0015 0.0008T
-0.076 0.076T
-0.041 0.023T
-0.0029 0.0029T
-0.0015 0.0008T
-0.088 0.088T
-0.048 0.028T
-0.0035 0.0035T
-0.0019 0.0011T
-0.090 0.090T
-0.050 0.030T
-0.0035 0.0035T
-0.0019 0.0011T
-0.090 0.090T
-0.050 0.025T
-0.0035 0.0035T
-0.0019 0.0009T
-0.093 0.093T
-0.053 0.028T
-0.0035 0.0035T
-0.0019 0.0009T
R7
R7
R7
R7
R7
Table 81 continued.
TABLE
81. Tapered roller bearingS Outer Ring Automotive Equipment Classes K and N (Metric)
Housing Bore
Rotating Outer Ring
Outer Ring
O.D.
Tolerance
Over
Incl.
mm
in.
mm
in.
Front Wheels
Rear Wheels
(Full-Floating
Trailer Wheels)
Rear Wheels
(Semi-Floating Axles)
Differential
(Split Seat)
Transmissions
Transfer Cases
Cross Shafts
Pinion Differential
(Solid Seat) Transaxles
Transmission(1)
Transfer Cases
Non-adjustable
Adjustable (TS)
Clamped (TSU)
Adjustable
Adjustable
Non-adjustable
Housing
Housing
Housing
Housing
Housing
Resultant
Resultant
Resultant
Resultant
Resultant
Bore
Symbol Bore
Symbol Bore
Symbol Bore
Symbol Bore
Symbol
Fit
Fit
Fit
Fit
Fit
Deviation
Deviation
Deviation
Deviation
Deviation
mm
in.
mm
in.
mm
in.
180.000 200.000
7.0866 7.8740
0.000
-0.030
0.0000
-0.0012
-0.106
-0.060
-0.0042
-0.0024
0.106T
0.030T
0.0042T
0.0012T
200.000 225.000
7.8740 8.8583
0.000
-0.030
0.0000
-0.0012
-0.109
-0.063
-0.0042
-0.0024
0.109T
0.033T
0.0042T
0.0012T
225.000 250.000
8.8583 9.8425
0.000
-0.030
0.0000
-0.0012
-0.113
-0.067
-0.0042
-0.0024
0.113T
0.037T
0.0042T
0.0012T
-0.113 0.113T
-0.067 0.037T
-0.0042 0.0042T
-0.0024 0.0012T
250.000 280.000
9.8425 11.0236
0.000
-0.035
0.0000
-0.0014
-0.126
-0.074
-0.0047
-0.0027
0.126T
0.039T
0.0047T
0.0013T
-0.126 0.126T
-0.074 0.039T
-0.0047 0.0047T
-0.0027 0.0013T
280.000 315.000
11.0236 12.4016
0.000
-0.035
0.0000
-0.0014
-0.130
-0.078
-0.0047
-0.0027
0.130T
0.043T
0.0047T
0.0013T
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
-0.106 0.106T
-0.060 0.030T
-0.0042 0.0042T
-0.0024 0.0012T
R7
R7
-0.016 0.016T
+0.030 0.060L
-0.0007 0.0007T
+0.0011 0.0023L
-0.016 0.016T
+0.036 0.071L
-0.0007 0.0007T
+0.0013 0.0027L
J7
J7
-0.016 0.016T
+0.030 0.060L
-0.0007 0.0007T
+0.0011 0.0023L
-0.016 0.016T
+0.036 0.071L
-0.0007 0.0007T
+0.0014 0.0027L
J7
J7
-0.109 0.109T
-0.063 0.033T
-0.0042 0.0042T
-0.0024 0.0012T
-0.130 0.130T
-0.078 0.043T
-0.0047 0.0047T
-0.0027 0.0013T
R7
R7
(1)Aluminum housings min. fit of 0.025 mm (0.001 in.) per inch of outer ring O.D. Magnesium housing min. fit of 0.038 mm (0.0015 in.) per inch of outer ring O.D.
159
hydra-rib
Classes C and B (Metric)
Deviation from nominal
(maximum) bearing bore and
resultant fit.
T= Tight
L = Loose
160
For heavy loads, high speed or shock, contact your Timken engineer for further information.
Class C
Class B
Over
Incl.
Bearing
Bore
Tolerance
Shaft
Resultant
O.D.
Fit
Deviation
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
30.000
1.1811
50.000
1.9685
-0.010
0.000
-0.0004
0.0000
+0.013
+0.002
+0.0005
+0.0001
0.023T
0.002T
0.0009T
0.0001T
50.000
1.9685
80.000
3.1496
-0.013
0.000
-0.0005
0.0000
+0.015
+0.002
+0.0006
+0.0001
0.028T
0.002T
0.0011T
0.0001T
80.000
3.1496
120.000
4.7244
-0.013
0.000
-0.0005
0.0000
+0.018
+0.003
+0.0007
+0.0001
120.000
4.7244
180.000
7.0866
-0.013
0.000
-0.0005
0.0000
180.000
7.0866
250.000
9.8425
-0.015
0.000
-0.0006
0.0000
Symbol
Bearing
Bore
Tolerance
Shaft
Resultant
O.D.
Fit
Deviation
Symbol
mm
in.
mm
in.
mm
in.
k5
-0.010
0.000
-0.0004
0.0000
+0.013
+0.002
+0.0005
+0.0001
0.023T
0.002T
0.0009T
0.0001T
k5
k5
-0.010
0.000
-0.0004
0.0000
+0.015
+0.002
+0.0006
+0.0001
0.025T
0.002T
0.0010T
0.0001T
k5
0.031T
0.003T
0.0012T
0.0001T
k5
-0.010
0.000
-0.0004
0.0000
+0.018
+0.003
+0.0007
+0.0001
0.028T
0.003T
0.0011T
0.0001T
k5
+0.021
+0.003
+0.0008
+0.0001
0.034T
0.003T
0.0013T
0.0001T
k5
-0.010
0.000
-0.0004
0.0000
+0.021
+0.003
+0.0008
+0.0001
0.031T
0.003T
0.0012T
0.0001T
k5
+0.024
+0.004
+0.0010
+0.0002
0.039T
0.004T
0.0016T
0.0002T
-0.013
0.000
-0.0005
0.0000
+0.024
+0.004
+0.0010
+0.0002
0.037T
0.004T
0.0015T
0.0002T
k5
Class C
Class B
Over
Incl.
Bearing
Bore
Tolerance
Shaft
Resultant
O.D.
Fit
Deviation
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
80.000
3.1496
120.000
4.7244
0.000
-0.013
0.0000
-0.0005
-0.023
-0.008
-0.0009
-0.0003
0.023T
0.005L
0.0009T
0.0002L
120.000
4.7244
180.000
7.0866
0.000
-0.013
0.0000
-0.0005
-0.027
-0.009
-0.0011
-0.0004
0.027T
0.004L
0.0011T
0.0001L
180.000
7.0866
250.000
9.8425
0.000
-0.015
0.0000
-0.0006
-0.031
-0.011
-0.0012
-0.0004
250.000
9.8425
315.000
12.4016
0.000
-0.020
0.0000
-0.0008
315.000
12.4016
400.000
15.7480
0.000
-0.020
0.0000
-0.0008
Symbol
Bearing
Bore
Tolerance
Shaft
Resultant
O.D.
Fit
Deviation
Symbol
mm
in.
mm
in.
mm
in.
M5
0.000
-0.010
0.0000
-0.0004
-0.023
-0.008
-0.0009
-0.0003
0.023T
0.002L
0.0009T
0.0001L
M5
M5
0.000
-0.010
0.0000
-0.0004
-0.027
-0.009
-0.0011
-0.0004
0.027T
0.001L
0.0011T
0.0000
M5
0.031T
0.004L
0.0012T
0.0002L
M5
0.000
-0.013
0.0000
-0.0005
-0.031
-0.011
-0.0012
-0.0004
0.031T
0.002L
0.0012T
0.0001L
M5
-0.036
-0.013
-0.0014
-0.0005
0.036T
0.007L
0.0014T
0.0003L
M5
0.000
-0.015
0.0000
-0.0006
-0.036
-0.013
-0.0014
-0.0005
0.036T
0.002L
0.0014T
0.0001L
M5
-0.039
-0.014
-0.0015
-0.0006
0.039T
0.006L
0.0015T
0.0002L
M5
161
ISO + J Prefix
Class B (metric)
Incl.
mm
in.
mm
in.
mm
in.
Floating
Clamped
Adjustable
Non-adjustable or
In Carriers
Outer Ring
Outer Ring
Outer Ring
Outer Ring
Outer Ring
Resultant
Resultant
Resultant
Resultant
Resultant
Seat
Symbol Seat
Symbol Seat
Symbol Seat
Symbol Seat
Symbol
Fit
Fit
Fit
Fit
Fit
Deviation
Deviation
Deviation
Deviation
Deviation
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
18.000 30.000
0.7087 1.1811
0.000
-0.006
0.0000
-0.0002
+0.007 0.007L
+0.016 0.022L
+0.0003 0.0003L
+0.0007 0.0009L
G5
0.000
0.000
+0.006 0.012L
0.0000 0.0000
+0.0002 0.0005L
H4
-0.008 0.008T
0.001
0.007L
-0.0004 0.0004T
0.0000 0.0002L
K5
-0.0140
-0.0050
-0.0006
-0.0002
0.0140T
0.0010L
0.0006T
0.00001L
M5
-0.021 0.021T
-0.012 0.006T
-0.0008 0.0008T
-0.0005 0.0002T
N5
30.000 50.000
1.1811 1.9685
0.000
-0.007
0.0000
-0.0003
+0.009 0.009L
+0.020 0.027L
+0.0004 0.0004L
+0.0008 0.0011L
G5
0.000
0.000
+0.007 0.014L
0.0000 0.0000
+0.0003 0.0006L
H4
-0.009 0.009T
0.002
0.009L
-0.0004 0.0004T
0.0000 0.0004L
K5
-0.016 0.016T
-0.005 0.002L
-0.0007 0.0007T
-0.0003 0.0000
M5
-0.024 0.024T
-0.013 0.006T
-0.0010 0.0010T
-0.0006 0.003T
N5
50.000 80.000
1.9685 3.1496
0.000
-0.009
0.0000
-0.0004
+0.010 0.010L
+0.023 0.032L
+0.0004 0.0004L
+0.0009 0.0013L
G5
0.000
0.000
+0.008 0.017L
0.0000 0.0000
+0.0003 0.0007L
H4
-0.010 0.010T
+0.003 0.012L
-0.0004 0.0004T
+0.0001 0.0005L
K5
-0.019
-0.006
-0.0008
-0.0003
M5
-0.028 0.028T
-0.015 0.006T
-0.0011 0.0011T
-0.0006 0.0002T
N5
80.000 120.000
3.1496 4.7244
0.000
-0.010
0.0000
-0.0004
+0.012 0.012L
+0.027 0.037L
+0.0005 0.0005L
+0.0011 0.0015L
G5
0.000
0.000
+0.010 0.020L
0.0000 0.0000
+0.0004 0.0008L
H4
-0.013 0.013T
+0.002 0.012L
-0.0005 0.0005T
+0.0001 0.0005L
K5
-0.023 0.023T
-0.008 0.002L
-0.0009 0.0009T
-0.0003 0.0001L
M5
-0.033 0.033T
-0.018 0.008T
-0.0014 0.0014T
-0.0008 0.0004T
N5
120.000 150.000
4.7244 5.9055
0.000
-0.011
0.0000
-0.0004
+0.014 0.014L
+0.032 0.043L
+0.0006 0.0006L
+0.0013 0.0017L
G5
0.000
0.000
+0.012 0.023L
0.0000 0.0000
+0.0005 0.0009L
H4
-0.0125
+0.0125
-0.0005
+0.0005
0.0125T
0.0235L
0.0005T
0.0009L
Js6
-0.027 0.027T
-0.009 0.002L
-0.0011 0.0011T
-0.0004 0.0000
M5
-0.039 0.039T
-0.021 0.010T
-0.0017 0.0017T
-0.0010 0.0006T
N5
150.000 180.000
5.9055 7.0866
0.000
-0.013
0.0000
-0.0005
+0.014 0.014L
+0.032 0.045L
+0.0006 0.0006L
+0.0013 0.0018L
G5
0.000
0.000
+0.012 0.025L
0.0000 0.0000
+0.0005 0.0010L
H4
-0.0125
+0.0125
-0.0005
+0.0005
0.0125T
0.0255L
0.0005T
0.0010L
Js6
-0.027 0.027T
-0.009 0.004L
-0.0011 0.0011T
-0.0004 0.0002L
M5
-0.039 0.039T
-0.021 0.008T
-0.0017 0.0017T
-0.0010 0.0005T
N5
180.000 250.000
7.0866 9.8425
0.000
-0.015
0.0000
-0.0006
+0.015 0.015L
+0.035 0.050L
+0.0006 0.0006L
+0.0014 0.0020L
G5
0.000
0.000
+0.014 0.029L
0.0000 0.0000
+0.0006 0.0012L
H4
-0.010 0.010T
+0.010 0.025L
-0.0004 0.0004T
+0.0004 0.0010L
Js5
-0.031 0.031T
-0.011 0.004L
-0.0012 0.0012T
-0.0004 0.0002L
M5
-0.045 0.045T
-0.025 0.010T
-0.0020 0.00250T
-0.0012 0.0006T
N5
250.000 315.000
9.8425 12.4016
0.000
-0.018
0.0000
-0.0007
+0.017 0.017L
+0.040 0.058L
+0.0007 0.0007L
+0.0016 0.0023L
G5
0.000
0.000
+0.016 0.034L
0.0000 0.0000
+0.0006 0.0013L
H4
-0.0115
+0.0115
-0.0005
+0.0005
Js5
-0.036 0.036L
-0.013 0.005L
-0.0014 0.0014T
-0.0005 0.0002L
M5
-0.050 0.050T
-0.027 0.009T
-0.0020 0.0020T
-0.0011 0.0004T
N5
162
0.0115T
0.0295L
0.0005T
0.0010L
0.0019T
0.0003L
0.0008T
0.0001L
Floating
Clamped
Adjustable
Non-adjustable or
In Carriers
Outer Ring
Outer Ring
Outer Ring
Outer Ring
Outer Ring
Resultant
Resultant
Resultant
Resultant
Resultant
Seat
Symbol Seat
Symbol Seat
Symbol Seat
Symbol Seat
Symbol
Fit
Fit
Fit
Fit
Fit
Deviation
Deviation
Deviation
Deviation
Deviation
Over
Incl.
mm
in.
mm
in.
mm
in.
18.000
0.7087
30.000
1.1811
0.000
-0.008
0.0000
-0.0003
+0.007 0.007L
+0.016 0.024L
+0.0003 0.0003L
+0.0007 0.0010L
G5
0.000
0.000
+0.009 0.017L
0.0000 0.0000
+0.0004 0.0007L
H5
-0.008 0.008T
+0.001 0.009L
-0.0004 0.0004T
0.0000 0.0003L
K5
-0.021 0.021T
-0.012 0.004T
-0.0010 0.0010T
-0.0005 0.0002T
N5
-0.024 0.024T
-0.011 0.003T
-0.0010 0.0010T
-0.0005 0.0002T
N6
30.000
1.1811
50.000
1.9685
0.000
-0.009
0.0000
-0.0004
+0.009 0.009L
+0.020 0.029L
+0.0004 0.0004L
+0.0008 0.0012L
G5
0.000
0.000
+0.011 0.020L
0.0000 0.0000
+0.0004 0.0008L
H5
-0.009 0.009T
+0.002 0.011L
-0.0004 0.0004T
0.0000 0.0004L
K5
-0.024 0.024T
-0.013 0.004T
-0.0010 0.0010T
-0.0006 0.0002T
N5
-0.028 0.028T
-0.012 0.003T
-0.0010 0.0011T
-0.0005 0.0001T
N6
50.000
1.9685
80.000
3.1496
0.000
-0.011
0.0000
-0.0004
+0.010 0.010L
+0.023 0.034L
+0.0004 0.0004L
+0.0009 0.0013L
G5
0.000
0.000
+0.013 0.024L
0.0000 0.0000
+0.0005 0.0009L
H5
-0.010 0.010T
+0.003 0.014L
-0.0004 0.0004T
+0.0001 0.0005L
K5
-0.028 0.028T
-0.015 0.004T
-0.0011 0.0011T
-0.0006 0.0002T
N5
-0.033 0.033T
-0.014 0.003T
-0.0013 0.0013T
-0.0006 0.0002T
N6
80.000
3.1496
120.000
4.7244
0.000
-0.013
0.0000
-0.0005
+0.012 0.012L
+0.027 0.040L
+0.0005 0.0005L
+0.0011 0.0016L
G5
0.000
0.000
+0.015 0.028L
0.0000 0.0000
+0.0006 0.0011L
H5
-0.013 0.013T
+0.002 0.015L
-0.0005 0.0005T
+0.0001 0.0006L
K5
-0.033 0.033T
-0.018 0.005T
-0.0014 0.0014T
-0.0008 0.0003T
N5
-0.038 0.038T
-0.016 0.003T
-0.0016 0.0016T
-0.0007 0.0002T
N6
120.000 150.000
4.7244 5.9055
0.000
-0.015
0.0000
-0.0006
+0.014 0.014L
+0.032 0.047L
+0.0006 0.0006L
+0.0013 0.0019L
G5
0.000
0.000
+0.018 0.033L
0.0000 0.0000
+0.0007 0.0013L
H5
-0.0125
+0.0125
-0.0005
+0.0005
0.0125T
0.0275L
0.0005T
0.0011L
Js6
-0.039 0.039T
-0.021 0.006T
-0.0017 0.0017T
-0.0010 0.0004T
N5
-0.045 0.0045T
-0.020 0.005T
-0.0019 0.0019T
-0.0009 0.0003T
N6
150.000 180.000
5.9055 7.0866
0.000
-0.018
0.0000
-0.0007
+0.014 0.014L
+0.032 0.050L
+0.0006 0.0006L
+0.0013 0.0020L
G5
0.000
0.000
+0.018 0.036L
0.0000 0.0000
+0.0007 0.0014L
H5
-0.0125
+0.0125
-0.0005
+0.0005
0.0125T
0.0305L
0.0005T
0.0012L
Js6
-0.039 0.039T
-0.021 0.003T
-0.0017 0.0017T
-0.0010 0.0003T
N5
-0.045 0.045T
-0.020 0.002T
-0.0019 0.0019T
-0.0009 0.0002T
N6
180.000 250.000
7.0866 9.8425
0.000
-0.020
0.0000
-0.0008
+0.015 0.015L
+0.035 0.055L
+0.0006 0.0006L
+0.0014 0.0022L
G5
0.000
0.000
+0.020 0.040L
0.0000 0.0000
+0.0008 0.0016L
H5
-0.0145
+0.0145
-0.0006
+0.0006
0.0145T
0.0345L
0.0006T
0.0014L
Js6
-0.045 0.045T
-0.025 0.005T
-0.0020 0.0020T
-0.0012 0.0004T
N5
-0.051 0.051T
-0.022 0.002T
-0.0022 0.0022T
-0.0010 0.0002T
N6
250.000 315.000
9.8425 12.4016
0.000
-0.025
0.0000
-0.0010
+0.017 0.017L
+0.040 0.065L
+0.0007 0.0007L
+0.0016 0.0026L
G5
0.000
0.000
+0.023 0.048L
0.0000 0.0000
+0.0009 0.0019L
H5
-0.020 0.020T
+0.003 0.028L
-0.0008 0.0008T
+0.0001 0.0011L
K5
-0.050 0.050T
-0.027 0.002T
-0.0020 0.0020T
-0.0011 0.0001T
N5
-0.050 0.050T
-0.027 0.002T
-0.0020 0.0020T
-0.0011 0.0001T
N5
315.000 400.000
12.4016 15.7480
0.000
-0.028
0.0000
-0.0011
+0.018 0.018L
+0.043 0.071L
+0.0007 0.0007L
+0.0017 0.0028L
G5
0.000
0.000
+0.025 0.053L
0.0000 0.0000
+0.0010 0.0021L
H5
-0.022 0.022T
+0.003 0.031L
-0.0009 0.0009T
+0.0001 0.0012L
K5
-0.055 0.055T
-0.030 0.002T
-0.0023 0.0023T
-0.0013 0.0002T
N5
-0.055 0.055T
-0.030 0.002T
-0.0023 0.0023T
-0.0013 0.0002T
N5
400.000 500.000
15.7480 19.6850
0.000
-0.030
0.0000
-0.0012
+0.020 0.020L
+0.047 0.077L
+0.0008 0.0008L
+0.0018 0.0030L
G5
0.000
0.000
+0.027 0.057L
0.0000 0.0000
+0.0011 0.0022L
H5
-0.025 0.025T
+0.002 0.032L
-0.0010 0.0010T
0.0000 0.0012L
K5
-0.060 0.060T
-0.033 0.003T
-0.0026 0.0026T
-0.0016 0.0004T
N5
-0.060 0.060T
-0.033 0.003T
-0.0026 0.0026T
-0.0016 0.0004T
N5
500.000 630.000
19.6850 24.8032
0.000
-0.035
0.0000
-0.0014
+0.025 0.025L
+0.050 0.085L
+0.0010 0.0010L
+0.0020 0.0034L
0.000
0.000
+0.025 0.060L
0.0000 0.0000
+0.0010 0.0024L
-0.025 0.025T
+0.000 0.035L
-0.0010 0.0010T
0.0000 0.0014L
-0.065 0.065T
-0.040 0.005T
-0.0026 0.0026T
-0.0016 0.0002T
-0.075 0.075T
-0.038 0.003T
-0.0030 0.0030T
-0.0015 0.0001T
630.000 800.000
24.8032 31.4961
0.000
-0.040
0.0000
-0.0016
+0.025 0.025L
+0.065 0.105L
+0.0010 0.0010L
+0.0026 0.0042L
0.000
0.000
+0.040 0.080L
0.0000 0.0000
+0.0016 0.0032L
-0.040 0.040T
0.000
0.040L
-0.0016 0.0016T
0.0000 0.0016L
-0.090 0.090T
-0.050 0.010T
-0.0035 0.0035T
-0.0020 0.0004T
-0.095 0.095T
-0.050 0.010T
-0.0037 0.0037T
-0.0020 0.0006t
800.000 1000.000
31.4961 39.3701
0.000
-0.050
0.0000
-0.020
+0.025 0.025L
+0.075 0.125L
+0.0010 0.0010L
+0.0030 0.0050L
0.000
0.000
+0.050 0.100L
0.0000 0.0000
+0.0020 0.0040L
-0.050 0.050T
0.000
0.050L
-0.0020 0.0020T
0.0000 0.0020L
-0.100 0.100T
-0.050
0.000
-0.0039 0.0039T
-0.0020 0.0000
-0.115 0.115T
-0.065 0.015T
-0.0045 0.0045T
-0.0026 0.0006T
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
163
ISO + J PREFIX
Classes 3 and 0 (Inch)
T= Tight
L = Loose
TABLE 86. Precision Class Tapered Roller Bearings Outer Ring
ISO + J Prefix, Classes 3 and 0 (Inch)
Floating
Clamped
Adjustable
Non-adjustable or
In Carriers
Non-adjustable or
In Carriers
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
152.400
6.0000
+0.013
0.000
+0.0005
0.0000
+0.026
+0.038
+0.0010
+0.0015
0.013L
0.038L
0.0005L
0.0015L
+0.013
+0.025
+0.0005
+0.0010
0.000
0.025L
0.0000
0.0010L
0.000
+0.013
0.0000
+0.0005
0.013T
0.013L
0.0005T
0.0005L
-0.012
0.000
-0.0005
0.0000
0.025T
0.000
0.0015T
0.0000
-0.025
-0.013
-0.0010
-0.0005
0.038T
0.013T
0.0015T
0.0005T
152.400
6.0000
304.800
12.0000
+0.013
0.000
+0.0005
0.0000
+0.026
+0.038
+0.0010
+0.0015
0.013L
0.038L
0.0005L
0.0015L
+0.013
+0.025
+0.0005
+0.0010
0.000
0.025L
0.0000
0.0010L
0.000
+0.025
0.0000
+0.0010
0.013T
0.025L
0.0005T
0.0010L
-0.025
0.000
-0.0010
0.0000
0.038T
0.000
0.0015T
0.0000
-0.038
-0.013
-0.0015
-0.0005
0.051T
0.013T
0.0020T
0.0005T
304.800
12.0000
609.600
24.0000
+0.025
0.000
+0.0010
0.0000
+0.038
+0.064
+0.0015
+0.0025
0.013L
0.064L
0.0005L
0.0025L
+0.025
+0.051
+0.0010
+0.0020
0.000
0.051L
0.0000
0.0020L
0.000
+0.025
0.0000
+0.0010
0.025T
0.025L
0.0010T
0.0010L
-0.025
0.000
-0.0010
0.0000
0.051T
0.000
0.0020T
0.0000
-0.038
-0.013
-0.0015
-0.0005
0.064T
0.013T
0.0025T
0.0005T
609.600
24.0000
914.400
36.0000
+0.038
0.000
+0.0015
0.0000
+0.051
+0.089
+0.0020
+0.0035
0.013L
0.089L
0.0005L
0.0035L
+0.038
+0.076
+0.0015
+0.0030
0.000
0.076L
0.0000
0.0030L
0.000
+0.038
0.0000
+0.0015
0.038T
0.038L
0.0015T
0.0015L
-0.038
0.000
-0.0015
0.0000
0.076T
0.000
0.0030T
0.0000
-0.051
-0.013
-0.0020
-0.0005
0.089T
0.013T
0.0035T
0.0005T
Over
Incl.
mm
in.
mm
in.
0.000
0.0000
(1)Maximum outer ring O.D. for Class 0 product is 315.00 mm (12.406 in.).
164
ISO + J PREFIX
Classes A and AA (Metric)
T= Tight
L = Loose
Incl.
mm
in.
mm
in.
mm
in.
0.000 315.000
0.0000 12.4016
0.000
-0.008
0.0000
-0.0003
Floating
Clamped
Adjustable
Non-adjustable or
In Carriers
Outer Ring
Outer Ring
Outer Ring
Outer Ring
Outer Ring
Resultant
Resultant
Resultant
Resultant
Resultant
Seat
Symbol Seat
Symbol Seat
Symbol Seat
Symbol Seat
Symbol
Fit
Fit
Fit
Fit
Fit
Deviation
Deviation
Deviation
Deviation
Deviation
mm
in.
mm
in.
mm
in.
+0.008 0.008L
+0.016 0.024L
+0.0003 0.0003L
+0.0006 0.0009L
mm
in.
mm
in.
0.000
0.000
+0.008 0.016L
0.0000 0.0000
+0.0003 0.0006L
mm
in.
-0.008 0.008T
0.000
0.008L
-0.0003 0.0003T
0.0000 0.0003L
mm
in.
mm
in.
-0.016 0.016T
-0.008
0.000
-0.0006 0.0006T
-0.0003 0.0000
mm
in.
mm
in.
-0.024 0.024T
-0.016 0.008T
-0.0009 0.0009T
-0.0006 0.0003T
ISO + J PREFIX
Classes 00 and 000 (Inch)
T= Tight
L = Loose
Over
Incl.
mm
in.
mm
in.
0.000
0.0000
315.000
12.4016
Floating
Clamped
Adjustable
Non-adjustable or
In Carriers
Non-adjustable or
In Carriers
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
Outer Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
+0.008
0.000
+0.0003
0.0000
+0.016
+0.023
+0.0006
+0.0009
0.008L
0.023L
0.0003L
0.0009L
+0.008
+0.015
+0.0003
+0.0006
0.000
0.015L
0.0000
0.0006L
0.000
+0.008
0.0000
+0.0003
0.008T
0.008L
0.0003T
0.0003L
-0.007
0.000
-0.0003
0.0000
0.015T
0.000
0.0006T
0.0000
-0.015
-0.008
-0.0006
-0.0003
0.023T
0.008T
0.0009T
0.0003T
165
ISO + J Prefix
Class C (Metric)
T= Tight
L = Loose
Ground Seat
Rotating Inner Ring
Range
Tolerance
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
18.000
0.7087
-0.007
0.000
-0.0003
0.0000
18.000
0.7087
30.000
1.1811
30.000
1.1811
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
+0.009
+0.001
+0.0004
+0.0001
0.016T
0.001T
0.0006T
0.0001T
-0.008
0.000
-0.0003
0.0000
+0.011
+0.002
+0.0004
+0.0001
0.019T
0.002T
0.0007T
0.0001T
50.000
1.9685
-0.010
0.000
-0.0004
0.0000
+0.013
+0.002
+0.0005
+0.0001
50.000
1.9685
80.000
3.1496
-0.012
0.000
-0.0005
0.0000
80.000
3.1496
120.000
4.7244
120.000
4.7244
180.000
7.0866
180.000
7.0866
200.000
7.8740
200.000
7.8740
225.000
8.8583
225.000
8.8583
250.000
9.8425
Over
Incl.
mm
in.
mm
in.
10.000
0.3937
Resultant
Fit
mm
in.
mm
in.
mm
in.
k5
+0.018
+0.007
+0.0007
+0.0003
0.025T
0.007T
0.0010T
0.0003T
m6
+0.009
+0.001
+0.0004
+0.0001
0.016T
0.001T
0.0006T
0.0001T
k5
k5
+0.017
+0.008
+0.0007
+0.0003
0.025T
0.008T
0.0010T
0.0003T
m5
+0.011
+0.002
+0.0004
+0.0001
0.019T
0.002T
0.0007T
0.0001T
k5
0.023T
0.002T
0.0009T
0.0001T
k5
+0.020
+0.009
+0.0008
+0.0003
0.030T
0.009T
0.0012T
0.0003T
m5
+0.013
+0.002
+0.0005
+0.0001
0.023T
0.002T
0.0009T
0.0001T
k5
+0.015
+0.002
+0.0006
+0.0001
0.027T
0.002T
0.0011T
0.0001T
k5
+0.033
+0.020
+0.0013
+0.0008
0.045T
0.020T
0.0018T
0.0008T
n5
+0.015
+0.002
+0.0006
+0.0001
0.027T
0.002T
0.0011T
0.0001T
k5
-0.015
0.000
-0.0006
0.0000
+0.018
+0.003
+0.0007
+0.0001
0.033T
0.003T
0.0013T
0.0001T
k5
+0.038
+0.023
+0.0015
+0.0010
0.053T
0.023T
0.0021T
0.0010T
n5
+0.018
+0.003
+0.0007
+0.0001
0.033T
0.003T
0.0013T
0.0001T
k5
-0.018
0.000
-0.0007
0.0000
+0.021
+0.003
+0.0008
+0.0001
0.038T
0.003T
0.0015T
0.0001T
k5
+0.056
+0.043
+0.0022
+0.0017
0.073T
0.043T
0.0029T
0.0017T
p4
+0.021
+0.003
+0.0008
+0.0001
0.039T
0.003T
0.0015T
0.0001T
k5
+0.091
+0.077
+0.0036
+0.0030
0.113T
0.077T
0.0044T
0.0030T
+0.094
+0.080
+0.0037
+0.0031
0.116T
0.080T
0.0046T
0.0031T
r4
+0.024
+0.004
+0.0010
+0.0002
0.046T
0.004T
0.0018T
0.0002T
k5
+0.098
+0.084
+0.0039
+0.0033
0.120T
0.084T
0.0047T
0.0033T
-0.022
0.000
-0.0009
0.0000
+0.024
+0.004
+0.0010
+0.0002
0.046T
0.004T
0.0018T
0.0002T
Symbol
k5
Symbol
Symbol
166
Table 89 continued.
Ground Seat
Rotating Inner Ring
Range
Tolerance
Over
Incl.
mm
in.
mm
in.
250.000
9.8425
280.000
11.0236
280.000
11.0236
315.000
12.4016
315.000
12.4016
355.000
13.9764
355.000
13.9764
400.000
15.7480
400.000
15.7480
450.000
17.7165
mm
in.
-0.022
0.000
-0.0009
0.0000
-0.025
0.000
-0.0010
0.0000
Resultant
Fit
mm
in.
mm
in.
+0.027
+0.004
+0.0011
+0.0002
+0.029
+0.004
+0.0011
+0.0002
0.048T
0.004T
0.0019T
0.0002T
0.054T
0.004T
0.0019T
0.0002T
Symbol
k5
k5
-0.025
0.000
-0.0010
0.0000
+0.022
+0.005
+0.0009
+0.0002
0.057T
0.005T
0.0022T
0.0002T
k5
450.000
17.7165
500.000
19.6850
500.000
19.6850
630.000
24.8032
-0.030
0.000
-0.0012
0.0000
+0.040
+0.010
+0.0016
+0.0004
0.070T
0.010T
0.0028T
0.0004T
630.000
24.8032
800.000
31.4961
-0.040
0.000
-0.0016
0.0000
0.055
+0.015
+0.0022
+0.0006
0.095T
0.015T
0.0037T
0.0006T
800.000
31.4961
1000.000
39.3701
-0.050
0.000
-0.0020
0.0000
+0.065
+0.015
+0.0026
+0.0006
0.115T
0.015T
0.0045T
0.0006T
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
+0.117
+0.094
+0.0046
+0.0037
0.139T
0.094T
0.0055T
0.0037T
+0.121
+0.098
+0.0048
+0.0039
0.143T
0.098T
0.0056T
0.0039T
+0.133
+0.108
+0.0052
+0.0043
0.154T
0.108T
0.0061T
0.0043T
+0.139
+0.144
+0.0055
+0.0057
0.164T
0.114T
0.0065T
0.0045T
+0.153
+0.126
+0.0060
+0.0050
0.178T
0.126T
0.0070T
0.0050T
+0.159
+0.132
+0.0063
+0.0052
0.184T
0.132T
0.0072T
0.0052T
+0.185
+0.150
+0.0073
+0.0059
0.215T
0.150T
0.0085T
0.0059T
+0.220
+0.175
+0.0087
+0.0069
0.260T
0.175T
0.0102T
0.0069T
+0.255
+0.200
+0.0100
+0.0079
0.305T
0.200T
0.0120T
0.0079T
Resultant
Fit
mm
in.
mm
in.
r5
+0.027
+0.004
+0.0011
+0.0002
0.049T
0.004T
0.0020T
0.0002T
k5
r5
+0.029
+0.004
+0.0012
+0.0002
0.054T
0.004T
0.0019T
0.0002T
k5
r5
+0.032
+0.005
+0.0011
+0.0002
0.057T
0.005T
0.0021T
0.0002T
k5
+0.040
+0.010
+0.0016
+0.0004
0.070T
0.010T
0.0028T
0.0004T
0.055
+0.015
+0.0022
+0.0006
0.095T
0.015T
0.0037T
0.0006T
+0.065
+0.015
+0.0026
+0.0006
0.115T
0.015T
0.0045T
0.0006T
Symbol
Symbol
167
ISO + J PREFIX
Class B (Metric)
T= Tight
L = Loose
Tolerance
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
18.000
0.7087
-0.005
0.000
-0.0002
0.0000
+0.009
+0.001
+0.0004
+0.0001
0.014T
0.001T
0.0006T
0.0001T
18.000
0.7087
30.000
1.1811
-0.006
0.000
-0.0002
0.0000
+0.011
+0.002
+0.0005
+0.0001
30.000
1.1811
50.000
1.9685
-0.008
0.000
-0.0003
0.0000
50.000
1.9685
80.000
3.1496
80.000
3.1496
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
k5
+0.015
+0.007
+0.0006
+0.0003
0.020T
0.007T
0.0008T
0.0003T
0.017T
0.002T
0.0007T
0.0001T
k5
+0.017
+0.008
+0.0007
+0.0003
+0.013
+0.002
+0.0005
+0.0001
0.021T
0.002T
0.0008T
0.0001T
k5
-0.009
0.000
-0.0004
0.0000
+0.015
+0.002
+0.0006
+0.0001
0.024T
0.002T
0.0010T
0.0001T
120.000
4.7244
-0.010
0.000
-0.0004
0.0000
+0.018
+0.003
+0.0007
+0.0001
0.028T
0.003T
0.0011T
0.0001T
120.000
4.7244
180.000
7.0866
-0.013
0.000
-0.0005
0.0000
+0.021
+0.003
+0.0008
+0.0001
0.034T
0.003T
0.0013T
0.0001T
180.000
7.0866
200.000
7.8740
200.000
7.8740
225.000
8.8583
225.000
8.8583
250.000
9.8425
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
m5
+0.009
+0.001
+0.0004
+0.0001
0.014T
0.001T
0.0006T
0.0001T
k5
0.023T
0.008T
0.0009T
0.0003T
m5
+0.011
+0.002
+0.0005
+0.0001
0.017T
0.002T
0.0007T
0.0001T
k5
+0.020
+0.009
+0.0008
+0.0004
0.028T
0.009T
0.0011T
0.0004T
m5
+0.013
+0.002
+0.0005
+0.0001
0.021T
0.002T
0.0008T
0.0001T
k5
k5
+0.033
+0.020
+0.0013
+0.0008
0.042T
0.020T
0.0017T
0.0008T
n5
+0.015
+0.002
+0.0006
+0.0001
0.024T
0.002T
0.0010T
0.0001T
k5
k5
+0.033
+0.023
+0.0014
+0.0010
0.043T
0.023T
0.0018T
0.0010T
n4
+0.018
+0.003
+0.0007
+0.0001
0.028T
0.003T
0.0011T
0.0001T
k5
k5
+0.055
+0.043
+0.0023
+0.0018
0.068T
0.043T
0.0028T
0.0018T
p4
+0.021
+0.003
+0.0008
+0.0001
0.034T
0.003T
0.0013T
0.0001T
k5
+0.091
+0.077
+0.0036
+0.0030
0.106T
0.077T
0.0042T
0.0030T
+0.094
+0.080
+0.0037
+0.0031
0.109T
0.084T
0.0043T
0.0031T
r4
+0.024
+0.004
+0.0010
+0.0002
0.046T
0.004T
0.0015T
0.0002T
k5
250.000
9.8425
+0.098
+0.084
+0.0039
+0.0033
0.113T
0.084T
0.0044T
0.0033T
280.000
11.0236
+0.110
+0.094
+0.0043
+0.0037
0.128T
0.094T
0.0050T
0.0037T
r4
+0.027
+0.004
+0.0011
+0.0002
0.045T
0.004T
0.0018T
0.0002T
k5
Over
Incl.
mm
in.
mm
in.
10.000
0.3937
280.000
11.0236
168
Moderate Loads,
No Shock
315.000
12.4016
-0.015
0.000
-0.0006
0.0000
-0.018
0.000
-0.0007
0.00000
+0.024
+0.004
+0.0010
+0.0002
+0.027
+0.004
+0.0011
+0.0002
0.039T
0.004T
0.0015T
0.0002T
0.045T
0.004T
0.0018T
0.0002T
Symbol
k5
k5
+0.114
+0.098
+0.0045
+0.0039
0.132T
0.098T
0.0052T
0.0039T
Symbol
Symbol
ISO + J PREFIX
Classes A and AA (Metric)
T= Tight
L = Loose
Resultant
Fit
mm
in.
mm
in.
mm
in.
18.000
0.7087
-0.005
0.000
-0.0002
0.0000
+0.013
+0.005
+0.0005
+0.0002
0.018T
0.005T
0.0007T
0.0002T
18.000
0.7087
30.000
1.1811
-0.006
0.000
-0.0002
0.0000
+0.013
+0.005
+0.0005
+0.0002
30.000
1.1811
315.000
12.4016
-0.008
0.000
-0.0003
0.0000
+0.013
+0.005
+0.0005
+0.0002
Over
Incl.
mm
in.
mm
in.
10.000
0.3937
ISO + J Prefix
Classes 3 and 0,
Classes 00 and 000 (Inch)
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
0.019T
0.005T
0.0007T
0.0002T
0.021T
0.005T
0.0008T
0.0002T
T= Tight
L = Loose
Symbol
Moderate Loads,
No Shock
Inner Ring
Seat
Deviation
Resultant
Fit
mm
in.
mm
in.
+0.013
+0.005
+0.0005
+0.0002
0.018T
0.005T
0.0007T
0.0002T
+0.013
+0.005
+0.0005
+0.0002
0.019T
0.005T
0.0007T
0.0002T
+0.013
+0.005
+0.0005
+0.0002
0.021T
0.005T
0.0008T
0.0002T
Symbol
Symbol
Moderate Loads,
No Shock
Inner Ring
Seat
Deviation
Resultant
Fit
Over
Incl.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
304.800
12.0000
0.000
+0.013
0.0000
+0.0005
+0.031
+0.018
+0.0012
+0.0007
0.031T
0.005T
0.0012T
0.0002T
304.800
12.0000
609.600
24.0000
0.000
+0.025
0.0000
+0.0010
+0.064
+0.038
+0.0025
+0.0015
0.064T
0.013T
0.0025T
0.0005T
609.600
24.0000
914.400
36.0000
0.000
+0.038
0.0000
+0.0015
+0.102
+0.064
+0.0040
+0.0025
0.102T
0.026T
0.0040T
0.0010T
Heavy Loads,
High Speed
or Shock
Tolerance
Shaft O.D.
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
0.000
+0.008
0.0000
+0.0003
+0.020
+0.013
+0.0008
+0.0005
0.020T
0.005T
0.0008T
0.0002T
Use Minimum
Tight Inner
Ring Fit of
0.00025 mm/mm
(0.00025 in./in.)
of Inner Ring
Bore
169
TXR
Suggested fitting guidelines for ferrous shaft and housing
For heavy loads, high speed or shock, contact your Timken engineer
for further information.
TABLE 93. Precision Class TXR Tapered Roller Bearings Shaft O.D.
TXR Classes S and p (Metric)
TXR
Classes S and P (Metric)
Deviation from nominal
(maximum) bearing bore and
resultant fit.
T= Tight
L = Loose
Bearing Bore
Class S
Range
Class P
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
50.000
1.9685
0.020T
0.0008T
0.007T
0.0003T
0.014T
0.0006T
0.004T
0.0002T
50.000
1.9685
80.000
3.1496
0.025T
0.0010T
0.010T
0.0004T
0.017T
0.0007T
0.004T
0.0002T
80.000
3.1496
120.000
4.7244
0.033T
0.0013T
0.013T
0.0005T
0.017T
0.0007T
0.004T
0.0002T
120.000
4.7244
180.000
7.0866
0.052T
0.0021T
0.027T
0.0011T
0.017T
0.0007T
0.004T
0.0002T
180.000
7.0866
250.000
9.8425
0.060T
0.0024T
0.030T
0.0012T
0.020T
0.0008T
0.004T
0.0002T
250.000
9.8425
315.000
12.4016
0.070T
0.0028T
0.035T
0.0014T
0.022T
0.0009T
0.004T
0.0002T
315.000
12.4016
400.000
15.7480
0.077T
0.0030T
0.037T
0.0015T
0.024T
0.0009T
0.004T
0.0002T
400.000
15.7480
500.000
19.6850
0.085T
0.0034T
0.040T
0.0016T
0.030T
0.0012T
0.004T
0.0002T
Over
Incl.
mm
in.
TABLE 94. Precision Class TXR Tapered Roller Bearings Housing bore
TXR Classes S and P (Metric)
Bearing Bore
Class S
Range
170
Class P
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
50.000
1.9685
0.020T
0.0008T
0.007T
0.0003T
0.014T
0.0006T
0.004T
0.0002T
50.000
1.9685
80.000
3.1496
0.025T
0.0010T
0.010T
0.0004T
0.017T
0.0007T
0.004T
0.0002T
80.000
3.1496
120.000
4.7244
0.033T
0.0013T
0.013T
0.0005T
0.017T
0.0007T
0.004T
0.0002T
120.000
4.7244
180.000
7.0866
0.052T
0.0021T
0.027T
0.0011T
0.017T
0.0007T
0.004T
0.0002T
180.000
7.0866
250.000
9.8425
0.060T
0.0024T
0.030T
0.0012T
0.020T
0.0008T
0.004T
0.0002T
250.000
9.8425
315.000
12.4016
0.070T
0.0028T
0.035T
0.0014T
0.022T
0.0009T
0.004T
0.0002T
315.000
12.4016
400.000
15.7480
0.077T
0.0030T
0.037T
0.0015T
0.024T
0.0009T
0.004T
0.0002T
400.000
15.7480
500.000
19.6850
0.085T
0.0034T
0.040T
0.0016T
0.030T
0.0012T
0.004T
0.0002T
Over
Incl.
mm
in.
TABLE 95. Precision Class TXR Tapered Roller Bearings Shaft O.D.
TXR Classes 3 and 0 (Inch)
TXR
Classes 3 and 0 (Inch)
Deviation from nominal
(maximum) bearing bore and
resultant fit.
T= Tight
L = Loose
Bearing Bore
Class 3
Range
Class 0
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
304.800
12.0000
0.037T
0.0015T
0.013T
0.0005T
0.020T
0.0008T
0.007T
0.0003T
304.800
12.0000
609.600
24.0000
0.077T
0.0030T
0.025T
0.0010T
0.037T
0.0015T
0.013T
0.0005T
609.600
24.0000
914.400
36.0000
0.114T
0.0045T
0.037T
0.0015T
914.400
36.0000
1219.200
48.0000
0.152T
0.0060T
0.051T
0.0020T
1219.200
48.0000
0.191T
0.0075T
0.064T
0.0025T
Over
Incl.
mm
in.
TABLE 96. Precision Class TXR Tapered Roller Bearings Housing bore
TXR Classes 3 and 0 (Inch)
Bearing Bore
Class 3
Range
Class 0
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
304.800
12.0000
0.037T
0.0015T
0.013T
0.0005T
0.020T
0.0008T
0.007T
0.0003T
304.800
12.0000
609.600
24.0000
0.077T
0.0030T
0.025T
0.0010T
0.037T
0.0015T
0.013T
0.0005T
609.600
24.0000
914.400
36.0000
0.114T
0.0045T
0.037T
0.0015T
914.400
36.0000
1219.200
48.0000
0.152T
0.0060T
0.051T
0.0020T
1219.200
48.0000
0.191T
0.0075T
0.064T
0.0025T
Over
Incl.
mm
in.
171
Thrust Bearings
Thrust Ball Bearings
Shaft and housing diameters shown as variance from nominal
dimensions.
Shaft Diameter
Bearing Bore
Nominal (Min.)
Interference Fit(1)
Loose Fit(2)
Over
Incl.
Max.
Min.
Over
Incl.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
171.450
6.7500
+0.000
+0.0000
-0.030
-0.0012
0.000
0.0000
504.825
19.8750
+0.076
+0.0030
+0.000
+0.0000
-0.152
-0.0060
-0.076
-0.0030
171.450
6.7500
508.000
20.0000
+0.000
+0.0000
-0.038
-0.0015
504.825
19.8750
1524.000
60.0000
+0.127
+0.0050
+0.000
+0.0000
-0.254
-0.0100
-0.127
-0.0050
Housing Diameter
Housing Diameter
Interference Fit(1)
Loose Fit(2)
Over
Incl.
Max.
Min.
Over
Incl.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
119.858
4.7188
441.325
17.3750
+0.229
+0.0090
+0.127
+0.0050
0.000
0.0000
584.000
23.0000
-0.152
-0.0060
-0.076
-0.0030
+0.152
+0.0060
0.076
0.0030
441.325
17.3750
1000.000
39.3701
+0.254
+0.0100
+0.152
+0.0060
584.000
23.0000
1778.000
70.0000
-0.254
-0.0100
-0.127
-0.0050
+0.254
+0.0100
0.127
0.0050
172
shaft and
housing
thrust
spherical
rollerfits
bearings
Tolerances for housing bore and for shaft diameters are shown as variance from nominal bearing
dimension. When application calls for thrust loads only, the housing must be relieved by 116 in.
on diameter so that no radial load is carried on the bearing.
Housing Bore
Shaft Diameter
Shaft Diameter
Stationary Load
Rotation Load
Bearing O.D.
Nominal (Max.)
Inches
Housing Bore
Springs in
Housing Light
Radial Load
Rotating
Outer Ring
Over
Incl.
Max.
Min.
Max.
Min.
Over
Incl.
Max.
Min.
Max.
Min.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
80.000
3.1496
120.000
4.7244
+0.013
+0.0005
-0.010
-0.0004
+0.025
+0.0010
+0.003
+0.0001
180.000
7.0866
250.000
9.8425
+0.061
+0.0024
+0.015
+0.0006
+0.028
+0.0011
-0.018
-0.0007
+0.013
+0.0005
-0.033
-0.0013
120.000
4.7244
180.000
7.0866
+0.015
+0.0006
-0.010
-0.0004
+0.028
+0.0011
+0.003
+0.0001
250.000
9.8425
315.000
12.0416
+0.069
+0.0027
+0.018
+0.0007
+0.033
+0.0013
-0.018
-0.0007
+0.015
+0.0006
-0.036
-0.0014
180.000
7.0866
200.000
7.8740
+0.018
+0.0007
-0.013
-0.0005
+0.036
+0.0014
+0.005
+0.0002
315.000
12.0416
400.000
15.7480
+0.074
+0.0029
+0.018
+0.0007
+0.038
+0.0015
-0.018
-0.0007
+0.015
+0.0006
-0.041
-0.0016
200.000
7.8740
240.000
9.4488
+0.018
+0.0007
-0.013
-0.0005
+0.046
+0.0018
+0.015
+0.0006
400.000
15.7480
500.000
19.6850
+0.084
+0.0033
+0.020
+0.0008
+0.041
+0.0016
-0.023
-0.0009
+0.018
+0.0007
-0.046
-0.0018
240.000
9.4488
315.000
12.0416
+0.018
+0.0007
-0.015
-0.0006
+0.051
+0.0020
+0.020
+0.0008
500.000
19.6850
630.000
24.8031
+0.091
+0.0036
+0.023
+0.0009
+0.046
+0.018
-0.023
-0.0009
+0.020
+0.0008
-0.048
-0.0019
315.000
12.0416
400.000
15.7480
+0.018
+0.0007
-0.018
-0.0007
+0.056
+0.0022
+0.020
+0.0008
630.000
24.8031
800.000
31.4960
+0.102
+0.0040
+0.023
+0.0009
+0.051
+0.0020
-0.023
-0.0009
+0.023
+0.0009
-0.051
-0.0020
400.000
15.7480
500.000
19.6850
+0.023
+0.0009
-0.018
-0.0007
+0.086
+0.0034
+0.046
+0.0018
+0.025
+0.0010
+0.058
+0.0023
-0.025
-0.0010
+0.025
+0.0010
-0.058
-0.0023
500.000
19.6850
630.000
24.8031
+0.023
+0.0009
-0.020
-0.0008
+0.086
+0.0034
+0.043
+0.0017
+0.028
+0.0011
+0.066
+0.0026
-0.028
-0.0011
+0.030
+0.0012
-0.064
-0.0025
173
TP
TPS
TABLE 103. Type TP and TPS ShafT FITS
Bearing O.D.
Nominal (Min.)
174
Shaft Diameter
Housing Diameter
Deviation from D
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
50.800
2.0000
60.325
2.3750
+0.038
+0.0015
+0.013
+0.0005
60.325
2.3750
82.550
3.2500
+0.043
+0.0017
+0.018
+0.0007
82.550
3.2500
93.663
3.6875
+0.048
+0.0019
+0.023
+0.0009
93.663
3.6875
101.600
4.0000
+0.053
+0.0021
+0.028
+0.0011
101.600
4.0000
115.092
4.5312
+0.071
+0.0028
+0.033
+0.0013
115.092
4.5312
254.000
10.0000
+0.076
+0.0030
+0.038
+0.0015
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
254.000
10.0000
457.200
18.0000
+0.102
+0.0040
+0.051
+0.0020
47.625
1.8750
53.975
2.1250
-0.025
-0.0010
-0.051
-0.0020
457.200
18.0000
558.800
22.0000
+0.127
+0.0050
+0.064
+0.0025
53.975
2.1250
63.500
2.5000
-0.028
-0.0011
-0.053
-0.0021
558.800
22.0000
660.400
26.0000
+0.140
+0.0055
+0.064
+0.0025
63.500
2.5000
76.200
3.0000
-0.030
-0.0012
-0.056
-0.0022
660.400
26.0000
711.200
28.0000
+0.152
+0.0060
+0.076
+0.0030
76.200
3.0000
88.900
3.5000
-0.033
-0.0012
-0.058
-0.0023
711.200
28.0000
863.600
34.0000
+0.178
+0.0070
+0.076
+0.0030
88.900
3.5000
177.800
7.0000
-0.038
-0.0015
-0.064
-0.0025
863.600
34.0000
965.200
38.0000
+0.203
+0.0080
+0.089
+0.0035
177.800
7.0000
228.600
9.0000
-0.038
-0.0015
-0.076
-0.0030
965.200
38.0000
1117.600
44.0000
+0.229
+0.0090
+0.102
+0.0040
228.600
9.0000
304.800
12.0000
-0.046
-0.0018
-0.084
-0.0033
304.800
12.0000
381.000
15.0000
-0.051
-0.0020
-0.089
-0.0035
381.000
15.0000
482.600
19.0000
-0.051
-0.0020
-0.102
-0.0040
482.600
19.0000
584.200
23.0000
-0.064
-0.0025
-0.114
-0.0045
584.200
23.0000
762.000
30.0000
-0.076
-0.0030
-0.140
-0.0055
Housing Diameter
Deviation from D
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
115.092
4.5312
254.000
10.0000
+0.076
+0.0030
+0.038
+0.0015
254.000
10.0000
457.200
18.0000
+0.102
+0.0040
+0.051
+0.002
457.200
18.0000
558.800
22.0000
+0.127
+0.0050
+0.064
+0.0025
558.800
22.0000
660.400
26.0000
+0.140
+0.0055
+0.064
+0.0025
660.400
26.0000
711.200
28.0000
+0.152
+0.0060
+0.076
+0.0030
711.200
28.0000
863.600
34.0000
+0.178
+0.0070
+0.076
+0.0030
863.600
34.0000
965.200
38.0000
+0.203
+0.0080
+0.089
+0.0035
965.200
38.0000
1117.600
44.0000
+0.229
+0.0090
+0.102
+0.0040
TTVS
TTHDFL
Shaft Diameter
Housing Bore
Over
Incl.
Min.(1)
Over
Incl.
Max.
Min.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
0.0000
304.800
12.0000
-0.051
-0.0020
161.925
6.3750
265.113
10.4375
+0.060
+0.0025
+0.025
+0.0010
304.800
12.0000
508.000
20.0000
-0.051
-0.0020
265.113
10.3475
317.500
12.5000
+0.076
+0.0030
+0.025
+0.0010
508.000
20.0000
711.200
28.0000
-0.076
-0.0030
317.500
12.5000
482.600
19.0000
+0.102
+0.0040
+0.051
+0.0020
711.200
28.0000
1219.200
48.0000
-0.102
-0.0040
482.600
19.0000
603.250
23.7500
+0.113
+0.0045
+0.051
+0.0020
1219.200
48.0000
1727.200
68.0000
-0.127
-0.0050
603.250
23.7500
711.200
28.0000
+0.152
+0.0060
+0.076
+0.0030
711.200
28.0000
838.200
33.0000
+0.178
+0.0070
+0.076
+0.0030
TABLE 108. THRUST tapered Roller Bearings TTHD BEARINGS FITTING GUIDELINES
Rotating Ring
Bore
Class 2
Stationary Ring
Class 3
Over
Incl.
Tolerance
Shaft O.D.
Deviation
Resultant
Fit
Tolerance
Shaft O.D.
Deviation
Resultant
Fit
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
0.000
304.800
0.0000
12.0000
0.000
+0.025
0.0000
+0.0010
+0.076
+0.050
+0.0030
+0.0020
0.076T
0.025T
0.0030T
0.0010T
0.000
+0.013
0.0000
+0.0005
+0.051
+0.038
+0.0020
+0.0015
0.051T
0.025T
0.0020T
0.0010T
304.800
609.600
12.0000
24.0000
0.000
+0.051
0.0000
+0.0020
+0.152
+0.102
+0.0060
+0.0040
0.152T
0.051T
0.0060T
0.0020T
0.000
+0.025
0.0000
+0.0010
+0.102
+0.076
+0.0040
+0.0030
0.102T
0.051T
0.0040T
0.0020T
609.600
914.400
24.0000
36.0000
0.000
+0.076
0.0000
+0.0030
+0.204
+0.127
+0.0080
+0.0050
0.204T
0.051T
0.0080T
0.0020T
0.000
+0.038
0.0000
+0.0015
+0.127
+0.089
+0.0050
+0.0035
0.127T
0.051T
0.0050T
0.0020T
914.400
1219.200
36.0000
48.0000
0.000
+0.102
0.0000
+0.0040
+0.254
+0.153
+0.0100
+0.0060
0.254T
0.051T
0.0100T
0.0020T
0.000
+0.051
0.0000
+0.0020
+0.153
+0.102
+0.0060
+0.0040
0.153T
0.051T
0.0060T
0.0020T
0.000
+0.127
0.0000
+0.0050
+0.305
+0.178
+0.0120
+0.0070
0.305T
0.051T
0.0120T
0.0020T
0.000
+0.076
0.0000
+0.0030
+0.204
+0.127
+0.0080
+0.0050
0.204T
0.051T
0.0080T
0.0020T
1219.200
48.0000
Class 2 and 3
TTHD
- Rotating ring O.D. must have
a minimum radial clearance of
2.5 mm (0.1 in.).
All
sizes
Provide a
minimum
radial
clearance
of
2.5 mm
(0.1 in.)
between
ring bore
and shaft
O.D.
175
OPERATING TEMPERATURES
OPERATING TEMPERATURES
Bearings operate in a wide range of applications and environments.
In most cases, bearing operating temperature is not an issue.
Some applications, however, operate at extreme speeds or in
extreme temperature environments. In these cases, care must
be taken not to exceed the temperature limits of the bearing.
Minimum temperature limits are primarily based on lubricant
capability. Maximum temperature limits are most often based on
material and/or lubricant constraints, but also may be based on
accuracy requirements of the equipment that the bearings are
built into. These constraints/limitations are discussed below.
S0
150
302
S1
200
392
S2
250
482
S3
300
572
S4
350
662
176
Lubrication limitations
Starting torque in grease-lubricated applications typically increases
significantly at cold temperatures. Starting torque is not primarily
a function of the consistency or channel properties of the grease.
Most often, it is a function of the rheological properties of the
grease.
The high-temperature limit for greases is generally a function of the
thermal and oxidation stability of the base oil in the grease and the
effectiveness of the oxidation inhibitors.
See the Lubrication and Seals section on page 191 for more
information on lubrication limitations.
Equipment requirements
The equipment designer must evaluate the effects of temperature
on the performance of the equipment being designed. Precision
machine tool spindles, for example, can be very sensitive to thermal
expansions. For some spindles, it is important that the temperature
rise over ambient be held to 20 C to 35 C (36 F to 45 F).
Most industrial equipment can operate at considerably higher
temperatures. Thermal ratings on gear drives, for example, are
based on 93 C (200 F). Equipment such as gas turbines operates
continuously at temperatures above 100 C (212 F). Running at high
temperatures for extended periods of time, however, may affect
shaft and housing fits, if the shaft and housing are not machined
and heat-treated properly .
OPERATING TEMPERATURES
Temp.
F
Hardness
HRC
1C
0.51.5Cr
0.35Mn
70
60
1C
0.51.5Cr
0.35Mn
70
350
450
58
56
54
Deep-hardening
steels for heavy sections per ASTM A485
1C
11.8Cr
11.5Mn .06Si
70
450
600
58
55
52
Material
70
58
70
58
-73 C -54 C -17 C 38 C 93 C 121 C 149 C 204 C 260 C 316 C 371 C 427 C
-100 F -65 F 0 F 100 F 200 F 250 F 300 F 400 F 500 F 600 F 700 F 800 F
STANDARD DIMENSIONAL
STABILIZATION
<0.0001 in./in dimensional change in
2500 hours at 100 C (212 F). Good
oxidation resistance.
Corrosion-resistant
440C stainless steel
per ASTM A756
1C 18Cr
Corrosion-resistant
440C stainless steel
per ASTM A756
1C 18Cr
70
450
600
58
55
52
M-50
medium
high speed
4Cr 4Mo
1V 0.8C
70
450
600
60
59
57
Note: Dimensional stability data shown above is the permanent metallurgical growth and/or shrinkage only. Thermal expansion
effects are not included. For operating temperatures above 427 C (800 F), consult your Timken engineer.
177
OPERATING TEMPERATURES
CAGES
Molded 6/6 nylon (PRB)
Molded 6/6 fiberglass
reinforced nylon (PRC)
Phenolic resin laminate
Low-carbon pressed steel
Pressed stainless steel
Machined bronze
Machined iron-silicon bronze
Machined steel
Shields
Low-carbon steel
Stainless steel
Nylon
Seals
Buna N
Polyacrylic
Fluoroelastomer
Stabilized TFE fluorocarbon(1)
TFE fluorocarbon(1) (with glass fabric)
(1)Limited life above these temperatures.
178
OPERATING TEMPERATURES
HEAT GENERATION AND DISSIPATION
heat dissipation
heat generation
179
TORQUE
Tapered Roller Bearings
TORQUE
Tapered Roller Bearings
Running torque-M
The rotational resistance of a rolling bearing depends on load, speed,
lubrication conditions and internal bearing characteristics.
The following formulas yield approximations to values of bearing
running torque. The formulas apply to bearings lubricated by oil.
For bearings lubricated by grease or oil mist, torque is usually
lower, although for grease lubrication this depends on amount
and consistency of the grease. The formulas also assume the
bearing running torque has stabilized after an initial period
referred to as running-in.
Bearing A
Bearing B
Bearing A
Bearing B
n
F ae
F rA
F rB
F ae
F rB
F rA
0.47 FrA
KA
KB
( )
( )
M = k1 G1 (n)0.62
nmin =
k2
G2
f2 Fr
f3 Fr
K
2/3
180
0.3
TORQUE
Tapered Roller Bearings
F rAB
FrC
F rAB
Bearing B
Bearing A
Fae
Fixed bearing
Bearing C
Bearing B
Bearing A
Fae
Fixed bearing
FrA = FrAB
KA
FaA = Fae
nmin =
Fae
0.47 FrAB
FrA
KA
FrB
F rAB
FrAB +
1.06 K Fae
2
( )
( )
Bearing A
= 2 k1 G1 (n) 0.62
nmin =
Fae
k2
G2
0.890 Fr
0.030 FrC
FrAB
1.06 K Fae
2
nminA =
f3 FrAB
0.3
2/3
f2 FrAB
K
0.3
0.060
k2 1.78FrA
K
G2
2/3
(FrA0.3 + FrB0.3 )
nminB =
( )
k2 1.78FrB
G2
K
2/3
FrC
Bearing C
Bearing B
0.3
2/3
k2
G2
M = k1 G1 (n)0.62
F rAB
Bearing B
Bearing A
( )
( )
( )
( )
M = k1 G1 (n)0.62
Fae
Floating bearing
The torque equations will be underestimated if operating speed, n, is less than nmin.
For values of f1 and f2, refer to Fig. 142 on page 182.
181
TORQUE
Tapered Roller Bearings
2.8
2.6
2.4
2.2
f2
2.0
1.8
1.6
1.4
f3
1.2
1.0
0.8
0.6
0.4
0.2
0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
KFa/Fr
Load Condition
f3 and f2
f3 = KFa/Fr
f3 = 0.06
f2 = f3 + 0.8
f3 = 1.78
182
TORQUE
Tapered Roller Bearings
10000
7500
5000
4000
3000
2000
1000
750
500
400
300
200
100
80
60
50
40
30
25
1500
20
18
16
14
1000
680
460
12
150
320
10
9
220
150
7
6
100
5
4.5
68
4
46
3.5
22
32
220
240 F
Temperature
Fig. 143. Viscosities in mPa.s (centipoise, cP) for ISO/ASTM industrial fluid lubricant
grade designations. Assumes: viscosity index 90; specific gravity 0.875 at 40 C (104 F).
183
TORQUE
CYLINDRICAL AND SPHERICAL ROLLER AND BALL BEARINGS
2/
3 dm3
f1 F dm + 10-7 f0 (v x n)
if (v x n) 2000
Dimension
Series
f0
f1
18
28
38
39
00
02
03
04
1.7
1.7
1.7
1.7
1.7
2
2.3
2.3
0.00010
0.00010
0.00010
0.00015
0.00015
0.00020
0.00020
0.00020
02
03
2
3
0.00025
0.00035
32
33
5
7
0.00035
0.00035
02
03
2
3
0.00037
0.00037
10
02
22
03
23
04
2
2
3
2
4
2
0.00020
0.00030
0.00040
0.00035
0.00040
0.00040
18
29
30
22
23
5
6
7
8
12
0.00055
0.00055
0.00055
0.00055
0.00055
30
39
40
31
41
22
32
03
23
4.5
4.5
6.5
5.5
7
4
6
3.5
4.5
0.00017
0.00017
0.00027
0.00027
0.00049
0.00019
0.00036
0.00019
0.00030
48
49
50
9
11
13
0.00055
0.00055
0.00055
11
12
3
4
0.00150
0.00150
92
93
94
2.5
2.5
3
0.00023
0.00023
0.00030
F = max
0.8Fa cot
or
Fr
184
SPEED RATINGS
radial ball bearings, spherical and cylindrical roller bearings
Speed Ratings
Radial Ball Bearings
There is no precise method for determining the maximum speed
at which a ball bearing may operate. Bearing characteristics
and features of surrounding parts, shafts, housing and other
components as well as basic service conditions are all variables
dependent upon each other for continued satisfactory high-speed
performance.
The safe operating speed of a bearing is often limited by the
temperature within the bearing, which, in turn, is dependent
upon the temperature surrounding the application, accuracy of
bearings, shafts, housings, auxiliary parts, etc., and the type and
amount of lubricant.
Radial bearings with proper internal refinements will operate at
high speeds for long periods if properly installed and lubricated.
Tolerance grade, cage design, and lubricant are bearing
characteristics which affect speed limitations.
Bearings with ISO P0 tolerances are generally satisfactory for
normal speeds with grease or oil lubrication.
Ball bearings with ISO P5 tolerances or better and ring-piloted
composition cages lubricated with an efficient, non-churning,
cooling oil-mist system have exceptional high-speed ability.
In the case of duplex mountings, as frequently used in high-speed
machine tool spindles, bearing preload and contact angle affect
the permissible speeds.
The values in table 115 may be used as a general guide for
determining the safe maximum speed of standard types of Timken
ball bearings. To obtain the speed value for any bearing size with
inner ring rotating, multiply the pitch diameter in millimeters (or,
in the case of extra-small inch dimension bearings, the nearest
millimeter equivalent) by the speed in revolutions per minute.
Refer to table 116 on page 186 for the most suitable bearing type,
cage style, tolerance guide and type of lubrication.
For outer ring rotation of ball bearings, multiply the speed value
(pitch or mean dia. in. mm x RPM of the outer ring) by the following
factors before referring to the table of speed values.
TABLE 115. Ball Bearing Series Factor
Extra-small (30 and S) and extra-light (9100 and M9300)
1.3
1.5
1.7
Temperature.
Bearing setting or clearance.
Lubrication.
Bearing design.
The relative importance of each of these factors depends on
the nature of the application. The effect of each factor is not
isolated each contributes in varying degrees, depending on the
application and overall speed capability of the design.
An understanding of how each of these factors affects
performance as speeds change is required to achieve the speed
capabilities inherent in a bearing.
185
SPEED RATINGS
radial ball bearings, spherical and cylindrical roller bearings
The thermal speed ratings are for reference only and can be
considerably lower or higher depending on your application.
Consult your Timken engineer for more accurate information
regarding a bearings speed limitations in your application.
Cage Type
Grease
ISO P6
Oil(1)
Grease
Oil(1)
ISO P5 and 4
Grease
Grease
Circulating
Oil(1)
Oil Mist
SINGLE-ROW
Non-filling slot
9300K, 9100K
250000
300000
250000
300000
300000
300000
300000
200K,
300000
350000
300000
350000
350000
400000
450000
300K,
350000
400000
350000
450000
400000
550000
650000
Composition (CR)
250000
250000
Filling slot
200W and variations
300W and variations
Angular contact
250000
300000
200000
300000
300000
350000
7200WN
300000
400000
7300WN
350000
400000
350000
400000
350000
400000
750000
1000000
1200000
1000000
1400000
1700000
5300
250000
300000
* Bore + O.D.
2
(1) For oil bath lubrication, oil level should be maintained covering between 13 to 12 up from the bottom of the lowest ball.
Note: Single or double normal contact (P or PP) sealed bearings should not exceed 300000 PDN.
Consult your Timken engineer for limiting speed of RR or Tri-Ply sealed bearings.
186
speed ratings
Tapered Roller Bearings
Dmn
12
(m/s)
Circulating oil
Oil level
(ft/min)
Grease
0 10 20 30 40 50 100
200 m/s
0 2000 4000 6000 8000 10000
20000 40000
Where:
Dm
mm, in.
= Bearing speed
rev/min
Fig. 144. Inner ring rib diameter. The inner ring rib diameter
may be scaled from a print.
The mean large rib diameter at the midpoint of the roller end
contact can be scaled from a drawing of the bearing, if available,
or this diameter can be determined by consulting your Timken
engineer. The inner, inner ring mean large rib diameter can be
approximated by taking 99 percent of larger rib O.D.
DN values (the product of the inner ring bore in mm and the speed
in rev/min) are often used as a measure of bearing speed by other
bearing manufacturers. There is no direct relationship between
the rib speed of a tapered roller bearing and DN value because of
the wide variation in bearing cross sectional thickness. However,
for rough approximation, one meter per second rib speed is about
equal to 16000 DN for average section bearings. One foot per
minute is equal to approximately 80 DN.
187
CONVERSION TABLES
CONVERSION TABLES
TABLE 118. Viscosity conversion table
Saybolt
(Sec.)
Redwood
(Sec.)
Engler
(Deg.)
Saybolt
(Sec.)
Redwood
(Sec.)
Engler
(Deg.)
SUS
SUS
35
32.2
1.18
40
36.2
1.32
2.7
450
397
12.8
97.4
4.3
475
419
13.5
45
40.6
103
1.46
5.9
500
441
14.2
50
108
44.9
1.60
7.4
550
485
15.6
119
55
49.1
1.75
8.9
600
529
17.0
130
60
53.5
1.88
10.4
650
573
18.5
141
65
57.9
2.02
11.8
700
617
19.9
152
70
62.3
2.15
13.1
750
661
21.3
163
75
67.6
2.31
14.5
800
705
22.7
173
80
71.0
2.42
15.8
850
749
24.2
184
85
75.1
2.55
17.0
900
793
25.6
195
90
79.6
2.68
18.2
950
837
27.0
206
95
84.2
2.81
19.4
1000
882
28.4
217
100
88.4
2.95
20.6
1200
1058
34.1
260
110
97.1
3.21
23.0
1400
1234
39.8
302
120
105.9
3.49
25.0
1600
1411
45.5
347
130
114.8
3.77
27.5
1800
1587
51
390
140
123.6
4.04
29.8
2000
1763
57
433
150
132.4
4.32
32.1
2500
2204
71
542
160
141.1
4.59
34.3
3000
2646
85
650
Centistokes
cSt
cSt
170
150.0
4.88
36.5
3500
3087
99
758
180
158.8
5.15
38.8
4000
3526
114
867
190
167.5
5.44
41.0
4500
3967
128
974
200
176.4
5.72
43.2
5000
4408
142
1082
220
194.0
6.28
47.5
5500
4849
156
1150
240
212
6.85
51.9
6000
5290
170
1300
260
229
7.38
56.5
6500
5730
185
1400
280
247
7.95
60.5
7000
6171
199
1510
300
265
8.51
64.9
7500
6612
213
1630
325
287
9.24
70.3
8000
7053
227
1740
350
309
9.95
75.8
8500
7494
242
1850
375
331
10.7
81.2
9000
7934
256
1960
400
353
11.4
86.8
9500
8375
270
2070
425
375
12.1
92.0
10000
8816
284
2200
188
Centistokes
CONVERSION TABLES
10
11
12
13
14
15
0.0000
0.000
25.400
50.800
76.200
101.600
127.000
152.400
177.800
203.200
228.600
254.000
279.400
304.800
330.200
355.600
381.000
116
0.0625
1.588
26.988
52.388
77.788
103.188
128.588
153.988
179.388
204.788
230.188
255.588
280.988
306.388
331.788
357.188
382.588
18
0.1250
3.175
28.575
53.975
79.375
104.775
130.175
155.575
180.975
206.375
231.775
257.175
282.575
307.975
333.375
358.775
384.175
316
0.1875
4.763
30.162
55.562
80.962
106.362
131.762
157.162
182.562
207.962
233.362
258.762
284.162
309.562
334.962
360.362
385.762
14
0.2500
6.350
31.750
57.150
82.550
107.950
133.350
158.750
184.150
209.550
234.950
260.350
285.750
311.150
336.550
361.950
387.350
516
0.3125
7.938
33.338
58.738
84.138
109.538
134.938
160.338
185.735
211.138
236.538
261.938
287.338
312.738
338.138
363.538
388.938
38
0.3750
9.525
34.925
60.325
85.725
111.125
136.525
161.925
187.325
212.725
238.125
263.525
288.925
314.325
339.725
365.125
390.525
716
0.4375
11.112
36.512
61.912
87.312
112.712
138.112
163.512
188.912
214.312
239.712
265.112
290.512
315.912
341.312
366.712
392.112
12
0.5000
12.700
38.100
63.500
88.900
114.300
139.700
165.100
190.500
215.900
241.300
266.700
292.100
317.500
342.900
368.300
393.700
916
0.5625
14.288
39.688
65.088
90.488
115.888
141.288
166.688
192.088
217.488
242.888
268.288
293.688
319.088
344.488
369.888
395.288
58
0.6250
15.875
41.275
66.675
92.075
117.475
142.875
168.275
193.675
219.075
244.475
269.875
295.275
320.675
346.075
371.475
396.875
1116
0.6875
17.462
42.862
68.262
93.662
119.062
144.462
169.862
195.262
220.662
246.062
271.462
296.862
322.262
347.662
373.062
398.462
34
0.7500
19.050
44.450
69.850
95.250
120.650
146.050
171.450
196.850
222.250
247.650
273.050
298.450
323.850
349.250
374.650
400.050
1316
0.8125
20.638
46.038
71.438
96.838
122.238
147.638
173.038
198.438
223.838
249.238
274.638
300.038
325.438
350.838
376.238
401.638
78
0.8750
22.225
47.625
73.025
98.425
123.825
149.225
174.625
200.025
225.425
250.825
276.225
301.625
327.025
352.425
377.825
403.225
1516
0.9375
23.812
49.212
74.612
100.012
125.412
150.812
176.212
201.612
227.012
252.412
277.812
303.212
328.612
354.012
379.412
404.812
inches
1/100 in.
10
254
25.4
279.4
50.8
304.8
76.2
330.2
101.6
355.6
127
381
152.4
406.4
177.8
431.8
203.2
457.2
228.6
482.6
1/1000 in.
1/10000 in.
1/10 mm
1/100 mm
1/1000 mm
in.
mm
in.
mm
in.
mm
in.
mm
mm
in.
mm
in.
mm
in.
0.1
2.54
0.01
0.254
0.001
0.0254
0.0001
0.00254
0.1
0.00394
0.01
0.00039
0.001
0.000039
0.2
5.08
0.02
0.508
0.002
0.0508
0.0002
0.00508
0.2
0.00787
0.02
0.00079
0.002
0.000079
0.3
7.62
0.03
0.762
0.003
0.0762
0.0003
0.00762
0.3
0.01181
0.03
0.00118
0.003
0.000118
0.4
10.16
0.04
1.016
0.004
0.1016
0.0004
0.01016
0.4
0.01575
0.04
0.00157
0.004
0.000157
0.5
12.70
0.05
1.270
0.005
0.1270
0.0005
0.01270
0.5
0.01969
0.05
0.00197
0.005
0.000197
0.6
15.24
0.06
1.524
0.006
0.1524
0.0006
0.01524
0.6
0.02362
0.06
0.00236
0.006
0.000236
0.7
17.78
0.07
1.778
0.007
0.1778
0.0007
0.01778
0.7
0.02756
0.07
0.00276
0.007
0.000276
0.8
20.32
0.08
2.032
0.008
0.2032
0.0008
0.02032
0.8
0.03150
0.08
0.00315
0.008
0.000315
0.9
22.86
0.09
2.286
0.009
0.2286
0.0009
0.02286
0.9
0.03543
0.09
0.00354
0.009
0.000354
mm
10
20
30
40
50
60
70
80
90
mm
100
200
300
0.39370
0.78740
1.18110
1.57480
1.96850
2.36220
2.75591
3.14961
3.93701
7.87402
11.81100
12.20470
0.03937
0.43307
0.82677
1.22047
1.61417
2.00787
2.40157
2.79528
3.18898
10
0.39370
4.33071
8.26772
0.07874
0.47244
0.86614
1.25984
1.65354
2.04724
2.44094
2.83465
3.22835
20
0.78740
4.72441
8.66142
12.59840
0.11811
0.51181
0.90551
1.29921
1.69291
2.08661
2.48031
2.87402
3.26772
30
1.18110
5.11811
9.05512
12.99210
0.15748
0.55118
0.94488
1.33858
1.73228
2.12598
2.51969
2.91339
3.30709
40
1.57480
5.51181
9.44882
13.38580
0.19685
0.59055
0.98425
1.37795
1.77165
2.16535
2.55906
2.95276
3.34646
50
1.96850
5.90551
9.84252
13.77950
10.23620 14.17320
0.23622
0.62992
1.02362
1.41732
1.71102
2.20472
2.59843
2.99213
3.38583
60
2.36220
6.29921
0.27559
0.66929
1.06299
1.45669
1.85039
2.24409
2.63780
3.03150
3.42520
70
2.75591
6.69291
10.62990 14.56690
0.31496
0.70866
1.10236
1.49606
1.88976
2.28346
2.67717
3.07087
3.46457
80
3.14961
7.08661
11.02360 14.96060
0.35433
0.74803
1.14173
1.53543
1.92913
2.32283
2.71654
3.11024
3.50394
90
3.54331
7.48031
11.41730 15.35430
189
CONVERSION TABLES
Rockwell Superficial
Hardness Number
Superficial Brale Penetrator
Rockwell Hardness
Number
Rockwell
C-Scale
Hardness
Number
Diamond
Pyramid
Hardness
Number
Vickers
Standard
Ball
Hultgren
Ball
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
940
900
865
832
800
772
746
720
697
674
653
633
613
595
577
560
544
528
513
498
484
471
458
446
434
500
487
475
464
451
442
432
421
409
613
599
587
575
561
546
534
519
508
494
481
469
455
443
432
421
409
739
722
705
688
670
654
634
615
595
577
560
543
525
512
496
481
469
455
443
432
421
409
85.6
85
84.5
83.9
83.4
82.8
82.3
81.8
81.2
80.7
80.1
79.6
79
78.5
78
77.4
76.8
76.3
75.9
75.2
74.7
74.1
73.6
73.1
72.5
76.9
76.1
75.4
74.5
73.8
73
72.2
71.5
70.7
69.9
69.2
68.5
67.7
66.9
66.1
65.4
64.6
63.8
63.1
62.1
61.4
60.8
60
59.2
58.5
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
423
412
402
392
382
372
363
354
345
336
327
318
310
302
294
286
279
272
266
260
254
248
243
238
400
390
381
371
362
353
344
336
327
319
311
301
294
286
279
271
264
258
253
247
243
237
231
226
400
390
381
371
362
353
344
336
327
319
311
301
294
286
279
271
264
258
253
247
243
237
231
226
400
390
381
371
362
353
344
336
327
319
311
301
294
286
279
271
264
258
253
247
243
237
231
226
72
71.5
70.9
70.4
69.9
69.4
68.9
68.4
67.9
67.4
66.8
66.3
65.8
65.3
64.7
64.3
63.8
63.3
62.8
62.4
62
61.5
61
60.5
(109)
(108.5)
(108)
(107.5)
(107)
(106)
(105.5)
(104.5)
(104)
(103)
(102.5)
(101.5)
(101)
100
99
98.5
97.8
57.7
56.9
56.2
55.4
54.6
53.8
53.1
52.3
51.5
50.8
50
49.2
48.4
47.7
47
46.1
45.2
44.6
43.8
43.1
42.1
41.6
40.9
40.1
190
Tensile Rockwell
Shore
B-Scale
D-Scale
A-Scale
Tungsten
15-N Scale 30-N Scale 45-N Scale Scleroscope Strength C-Scale
100 kg Load
100 kg
Carbide 60 kg Load
15 kg Load 30 kg Load 45 kg Load Hardness (approx.) Hardness
116 in. Dia.
Penetrator
Penetrator
Ball
1000 psi Number
Number
Ball
93.2
92.9
92.5
92.2
91.8
91.4
91.1
90.7
90.2
89.8
89.3
88.9
88.3
87.9
87.4
86.9
86.4
85.9
85.5
85
84.5
83.9
83.5
83
84.4
83.6
82.8
81.9
81.1
80.1
79.3
78.4
77.5
76.6
75.7
74.8
73.9
73
72
71.2
70.2
69.4
68.5
67.6
66.7
65.8
64.8
64
75.4
74.2
73.3
72
71
69.9
68.8
67.7
66.6
65.5
64.3
63.2
62
60.9
59.8
58.6
57.4
56.1
55
53.8
52.5
51.4
50.3
49
97
95
92
91
88
87
85
83
81
80
78
76
75
74
72
71
69
68
67
66
64
63
62
60
326
315
305
295
287
278
269
262
253
245
239
232
225
219
212
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
82.5
82
81.5
80.9
80.4
79.9
79.4
78.8
78.3
77.7
77.2
76.6
76.1
75.6
75
74.5
73.9
73.3
72.8
72.2
71.6
71
70.5
69.9
69.4
63.1
62.2
61.3
60.4
59.5
58.6
57.7
56.8
55.9
55
54.2
53.3
52.1
51.3
50.4
49.5
48.6
47.7
46.8
45.9
45
44
43.2
42.3
41.5
47.8
46.7
45.5
44.3
43.1
41.9
40.8
39.6
38.4
37.2
36.1
34.9
33.7
32.5
31.3
30.1
28.9
27.8
26.7
25.5
24.3
23.1
22
20.7
19.6
58
57
56
55
54
52
51
50
49
48
47
46
44
43
42
41
41
40
38
38
37
36
35
35
34
206
201
196
191
186
181
176
172
168
163
159
154
150
146
142
138
134
131
127
124
121
118
115
113
110
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
Lubrication
To help maintain a bearings antifriction
characteristics, lubrication is needed to:
Lubrication
The wide range of bearing types and operating conditions
precludes any simple, all-inclusive statement or guideline
allowing the selection of the proper lubricant. At the design
level, the first consideration is whether oil or grease is best for
the particular operation. The advantages of oil and grease are
outlined in the table below. When heat must be carried away from
the bearing, oil must be used. It is almost always preferred for
very high-speed applications. For speed ratings of grease and
oil-lubricated bearings, see pages 185-187.
Grease
Permits prelubrication of
sealed or shielded bearings
Oil Lubrication
Oils used for bearing lubrication should be high-quality mineral
oils or synthetic oils with similar properties. Selection of the
proper type of oils depends on bearing speed, load, operating
temperature and lubrication method. Some features and
advantages of oil lubrication, in addition to the above are:
192
Petroleum oils
Petroleum oils are made from a petroleum hydrocarbon derived
from crude oil, with additives to improve certain properties.
Petroleum oils are used for nearly all oil-lubricated applications
of bearings.
Viscosity
The selection of oil viscosity for any bearing application requires
consideration of several factors: load, speed, bearing setting,
type of oil and environmental factors. Since oil viscosity varies
inversely with temperature, a viscosity value must always be
stated with the temperature at which it was determined. Highviscosity oil is used for low-speed or high-ambient-temperature
applications. Low-viscosity oil is used for high-speed or lowambient-temperature applications.
There are several classifications of oils based on viscosity grades.
The most familiar are the Society of Automotive Engineers (SAE)
classifications for automotive engine and gear oils. The American
Society for Testing and Materials (ASTM) and the International
Organization for Standardization (ISO) have adopted standard
viscosity grades for industrial fluids. Fig. 145 shows the viscosity
comparisons of ISO/ASTM with SAE classification systems at
40 C (104 F).
Viscosity classification comparison
Synthetic oils
Synthetic oils cover a broad range of categories and include
polyalphaolefins, silicones, polyglycols and various esters. In
general, synthetic oils are less prone to oxidation and can operate
at extreme hot or cold temperatures. Physical properties, such as
pressure-viscosity coefficients, tend to vary between oil types;
use caution when making oil selections.
2000
1500
1500
1000
800
1000
600
680
400
460
300
320
200
150
100
80
60
40
30
85W min.
500
400
30
300
80W min.
20
200
10W min.
5W min.
SAE
Crankcase Oils
7
5
3
2
1000
700
40
32
10
90
50
46
10
8
2000
1500
68
15
3000
140
100
15
5000
4000
250 min.
150
20
7500
220
22
10000
150
70W min.
SAE
Gear Oil
100
75
60
50
40
35
33
ISO/ASTM
Viscosity Grade
193
20000
5000
200000
50000
10000
5000
1000
500
200
2000
1000
100
500
50
20
10
5.00
4.00
3.00
2.00
1.50
1.00
Viscosity Range
cSt (mm2/s) at
40 C (104 F)(1)
1500
1350-1650
1000
900-1100
680
612-748
460
414-506
320
288-352
220
198-242
150
135-165
100
90-110
68
61-75
46
41-51
32
29-35
22
20-24
(1)
Rounded off to the nearest
whole number
ISO VG
200
680
460
320
220
150
100
68
46
32
100
75
50
40
35
500000
100000
33
60
100
Additives
Viscosity index
80 min.
Pour point
Viscosity grades
100
150
140
180
220
260
300
210
Temperature Degrees Fahrenheit
Properties
Base stock
Additives
Viscosity index
80 min.
Pour point
Viscosity grades
194
Grease Lubrication
Grease lubrication is generally applicable to low-to-moderate
speed applications that have operating temperatures within
the limits of the grease. There is no universal anti-friction
bearing grease. Each grease has limiting properties and
characteristics.
Greases consist of a base oil, a thickening agent and additives.
Conventionally, bearing greases have consisted of petroleum
base oils thickened to the desired consistency by some form of
metallic soap. More recently synthetic base oils have been used
with organic and inorganic thickeners. Table 128 summarizes the
composition of typical lubricating greases.
TABLE 128. Composition of greases
Base Oil
Mineral oil
Synthetic
hydrocarbon
Thickening
+
Agents
+ Additives =
Lubricating
Grease
Rust inhibitors
Dyes
Tactifiers
Non-Soap (inorganic)
Metal deactivates
microgel (clay),
Perfluorinated oil
carbon black,
Oxidation inhibitors
silica-gel, PTFE
Silicone
Anti-wear EP
Non-Soap (organic)
Polyurea compounds
Esters
Typical
Dropping Point
Maximum
Temperature
Typical
Water Resistance
Lithium
soap
193
380
121
250
Good
Lithium
complex
260+
500+
149
300
Good
Aluminum
complex
249
480
149
300
Excellent
Calcium
sulfonate
299
570
177
350
Excellent
Polyurea
260
500
149
300
Good
Low temperatures
Starting torque in a grease-lubricated bearing at low temperatures
can be critical. Some greases may function adequately as long
as the bearing is operating, but resistance to initial movement
may be excessive. In certain smaller machines, starting may be
impossible when very cold. Under such operating circumstances,
greases containing low-temperature characteristic oils are
generally required.
If the operating temperature range is wide, synthetic greases
offer advantages. Synthetic greases are available to provide very
low starting and running torque at temperatures as low as -73
C (-100 F). In certain instances, these greases perform better in
this respect than oil.
An important point concerning lubricating greases is that the
starting torque is not necessarily a function of the consistency
or the channel properties of the grease. Starting torque is more
a function of the individual rheological properties of a particular
grease and is best evaluated by application experience.
High temperatures
The high temperature limit for lubricating greases is generally
a function of the thermal and oxidation stability of the fluid and
the effectiveness of the oxidation inhibitors. Grease temperature
ranges are defined by both the dropping point of the grease
thickener and composition of the base oil. Table 130 shows
the temperature ranges of various base oils used in grease
formulations.
A rule of thumb, developed from years of testing greaselubricated bearings, indicates that grease life is halved for every
10 C (50 F) increase in temperature. For example, if a particular
grease provides 2000 hours of life at 90 C (194 F), by raising the
temperature to 100 C (212 F), reduction in life to approximately
1000 hours would result. On the other hand, 4000 hours could be
expected by lowering the temperature to 80 C (176 F).
195
Ester
Synthetic
hydrocarbon
Silicone
Perfluoroalkyl
polyether
Temperature range
Contamination
Abrasive Particles
When roller bearings operate in a clean environment, the primary
cause of damage is the eventual fatigue of the surfaces where
rolling contact occurs. However, when particle contamination
enters the bearing system, it is likely to cause damage such as
bruising, which can shorten bearing life.
When dirt from the environment or metallic wear debris from
some component in the application are allowed to contaminate
the lubricant, wear can become the predominant cause of
bearing damage. If bearing wear becomes significant, changes
will occur to critical bearing dimensions that could adversely
affect machine operation.
Bearings operating in a contaminated lubricant exhibit a higher
initial rate of wear than those running in an uncontaminated
lubricant. With no further contaminant ingress, this wear rate
quickly diminishes. The contamination particles are reduced
in size as they pass through the bearing contact area during
normal operation.
196
Petroleum
Water
Grease selection
The successful use of bearing grease depends on the physical
and chemical properties of the lubricant as well as application
and environmental conditions. Because the choice of grease
for a particular bearing under certain service conditions is often
difficult to make, you should consult with your lubricant supplier
or equipment maker for specific questions about lubrication
requirements for your application. You also can contact your
Timken engineer for general lubrication guidelines for any
application.
Grease must be carefully selected with regard to its consistency
at operating temperature. It should not exhibit thickening,
separation of oil, acid formation or hardening to any marked
degree. It should be smooth, non-fibrous and entirely free from
chemically active ingredients. Its dropping point should be
considerably higher than the operating temperature.
APPLICATION
Timken Premium
All-Purpose Industrial Grease
Timken
Food Safe Grease
Timken
Synthetic Industrial Grease
Moderate Speeds
Light to Moderate Loads
Moderate Temperatures
Moderate Water
Timken
Multi-Use Lithium Grease
This selection guide is not intended to replace the specifications by the equipment builder, who is responsible for its performance.
Quiet running.
Space and/or vacuum.
Electrical conductivity.
For assistance with these or other areas requiring special lubricants, consult your
Timken engineer.
TIMKEN ENGINEERING MANUAL
197
198
Prelubricated bearings
Prelubricated shielded and sealed bearings are successfully
used in applications where:
Penetration Number
355-385
310-340
265-295
220-250
175-205
130-160
85-115
to satisfactory use.
Grease Type
Grease Temperature
Range
Radial bearings
(Double shielded and single
and double sealed)
Polyurea thickener
Petroleum oil
-34 C to +135 C
(-30 F to +275 F)
Polyurea thickener
Petroleum oil
-34 C to +135 C
(-30 F to +275 F)
Synthetic thickener
Synthetic
hydrocarbon fluid
-54 C to +163 C
(-65 F to +325 F)
Consistency
Greases may vary in consistency from semi-fluids that are hardly
thicker than a viscous oil to solid grades almost as hard as a
soft wood.
Consistency is measured by a penetrometer in which a standard
weighted cone is dropped into the grease. The distance the cone
penetrates (measured in tenths of a millimeter in a specific time)
is the penetration number.
199
Aluminum Complex
Timken Food Safe
Barium Complex
Calcium Stearate
Calcium 12 Hydroxy
Calcium Complex
Calcium Sulfonate
Timken Premium Mill
Timken Heavy-Duty Moly
Clay Non-Soap
Lithium Stearate
Lithium 12 Hydroxy
Lithium Complex
Polyurea Conventional
Polyurea Shear Stable
Timken Multi-Use
Timken All -Purpose
Timken Synthetic
Timken Pillow Block
Note
Mixing greases can result
in improper bearing lubrication.
Warning
Always follow the specific lubrication instructions of your equipment supplier.
Mixing greases can result in improper
bearing lubrication. Always follow the
specific lubrication instructions of your
equipment supplier.
200
Polyurea S S
Polyurea
Li Complex
Li 12 Hydroxy
Li Stearate
Clay Non-Soap
Ca Sulfonate
= Incompatible
Ca Stearate
= Borderline
Ba Complex
= Compatible
Al Complex
= Best Choice
Ca Complex
Seals
Selecting the right seal
When selecting the proper seal design for any Timken bearing
application, it is necessary to consider the type of lubricant, the
operation environment, the speed of the application and general
operating conditions.
Shaft finish
It is important to ensure that no spiral grooves result from
machining the shaft surfaces since these will tend to draw
lubricant out of, or contaminant into, the bearing cavity. Plunge
grinding normally produces a satisfactory surface finish.
Non-contacting seals
Machined flingers
Machined parts, along with other closure elements, can be used
in place of stampings when closer clearances are desired. This
results in a more efficient retention of lubricant and exclusion of
foreign matter from the bearing housing. Examples are shown in
fig. 151 and fig. 152.
An umbrella-shaped flinger is shown in fig. 152 combined with
an annular groove closure. This combination effectively retains
oil and keeps out dirt at high shaft speeds.
Metal stampings
Metal stamping closures are effective in clean applications.
When environmental conditions are dirty, stampings are used in
combination with other closure elements to provide an effective
labyrinth against the entry of foreign matter into the bearing
chamber.
201
contacting seals
Annular grooves
Many types and styles of radial lip seals are commercially available
to satisfy different sealing requirements. In clean environments,
where the primary requirement is the retention of lubricant in the
bearing housing, a single lip seal with the lip pointing inward is
often used. When the critical concern is excluding contaminants,
the lip is usually pointed outward (fig. 154).
70
a c
a
c
c
b
70 70
70
b
b
Clearance
Clearance
Clearance
Clearance
mm
in.
Dimension a
3.20 - 4.80
0.125 - 0.190
Dimension b
4.00 - 4.80
0.160 - 0.190
Dimension c
0.5a
Diametral clearance
0.25 - 0.40
0.010 - 0.016
1.3 max.
0.05 max.
Fig. 155. Lip seal plus machined labyrinth.
202
The DUO FACE-PLUS seal (fig. 156) has double lips that seal in the
housing bore and the ground surface of the outer ring front face.
This eliminates the need to machine a special seal surface. The
DUO FACE-PLUS seal has proven successful in many different
types of grease-lubricated applications.
Diaphragm seals
Diaphragm seals (fig. 157) are commercially available. The
metallic lip is designed to be spring-loaded against the narrow
face of the outer ring. The type shown in fig. 158 has a second
lip that seals against the housing.
Fig. 159. Mechanical face seal for low speeds and contaminated
environments.
V-ring seals
V-ring seals can be used in conjunction with grease or oil
lubrication. As rotational speeds increase, the lip tends to pull
away from the sealing surface and acts like a flinger. This seal
may be used with either oil or grease lubrication (fig. 160). Consult
your V-ring seal supplier for application restrictions.
203
204
Suffix PP
P type
PP type
205
Tri-Ply Seals
Tri-Ply Shroud Seal ball bearings are designed for bearing
applications involving exceptionally severe contamination or
abrasion environments. They are produced in many types and
sizes, both in the radial and wide inner ring designs.
Each Tri-Ply seal consists of a triple-lip nitrile seal molded to a
heavy metal shroud cap. All three seal lips have heavy flareout contact with the inner ring outside diameter and provide
exceptionally effective protection against lubricant loss and wet
or abrasive contaminants entry. The shroud cap, which nests
closely with the outside seal lip, helps protect the rubber seal
members from abrasive damage.
A feature of these bearings is the balanced design, consisting
of deep raceways, large ball size, and extra-wide or heavy inner
rings. The use of Tri-Ply bearings simplifies housing designs,
and their extra inner ring width provides greater support on the
shaft. These bearings are widely used on conveyors and farm
machinery such as disc harrows, hillers, tomato harvesters and
cotton harvesters.
206
NOTES
207
NOTES
208
www.timken.com
Price: USD $75