Professional Documents
Culture Documents
City Jazz Big Band: Production Rider 2012
City Jazz Big Band: Production Rider 2012
Production Rider
2012
Page 1 of 4
Trumpets
52134
Trombones
2134
Saxes
32145
Monitors
Monitors for the horns should be placed on stands, so that they are on the same height as the
musicians ears. The stands are placed approximately one meter in font of every section and the
speakers are turned back at a slight angle, directed mainly towards the two musicians on the far
right. The others will hear the drums well anyway. The main reason for using monitors for the horns
is to hear the drums. The mix for these monitors should be 60% ride cymbal and hihat, 20% bass
and 20% piano, or thereabouts. It is not advisable to put saxes, trombones or trumpets in the
monitors. This will only result in a too loud total volume and generally poorer hearing. Vocals should
be heard through sidefills (speakers on side of the stage which mainly amplify vocals and soloing
horns). Vocals can also be heard through the vocalists own wedge monitor, but mainly by those
musicians who sit close this wedge.
Music Stands
The horns have one music stand each, but the rhythm section need two. The music stands should
be slanted down to an angle of approximately 45 degrees.
Page 2 of 4
Mikrophones
1. Conductor and Singers (in case the project includes singer)
2 vocal mics (Shure SM58 or similar)
1 DIbox for EWI
2. Trumpet section
5 large diaphragm mcs (EV RE20 RESERIES or similar)
3. Trombon section
4 large diaphragm mcs (EV RE20 RESERIES or similar)
4. Saxophone section
5 large diaphragm mcs (EV RE20 RESERIES or similar)
5. Rythm section
5.1. Drumset
Standart
5.5. Percussion
2 OH
Page 3 of 4
Page 4 of 4