Professional Documents
Culture Documents
4690 MH2 PDF
4690 MH2 PDF
4690 MH2 PDF
Metal Hose
Instrumentation Markets
Catalog 4690-MH2/US
February 2002
Table of Contents
Table of Contents
Introduction to Parflex Flexible Metal Hoses ........................................................................... 2
Why Parflex Metal Hoses Are Superior.................................................................................... 2
How to Build Parflex Metal Hose Assemblies .......................................................................... 3
Metal Hose Size and Performance Specifications
9A General Purpose Hose .............................................................................................. 4
9M Flexible Metal Hose ................................................................................................... 5
9H High Pressure Metal Hose ......................................................................................... 6
Fittings .................................................................................................................................. 7-8
Flanges ............................................................................................................................... 9-10
Technical Information ....................................................................................................... 11-17
Parflex Metal Hose Ordering Checklist .................................................................................. 18
General Markets for Parflex Metal Hose ................................................................................ 19
Parker Safety Guide ......................................................................................................... 20-21
Offer of Sale............................................................................................................................ 22
WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users
having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due
to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of
the products and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its
subsidiaries at any time without notice.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed
by the provisions stated in the "Offer of Sale".
FluidConnectors
Introduction
Products
Sizes
1/4" to 6"
Working Pressures
To our customers
We believe our Parflex Metal Hose to be the strongest, most flexible, longest lasting metal hose on the market
today. This catalog offers details on how to order Parflex Metal Hoses. Please review this information carefully
before ordering.
Stainless
Outer Braid
Stainless
Core Tube
Example of
Typical Metal Hose
2
FluidConnectors
How to Order
9A
TU
06
06
06
06
30
Hose Series
9A = General purpose
9M = Flexible
9H = High pressure
Code #
SS Braid and Tube Material
0 = No braid/321 tube
1 = Single braid/321 tube
2 = Double braid/321 tube
3 = No braid/316L
4 = Single/316 or 316L
5 = Double braid/316 or 316L
(304SS braid material for all hoses)
(9H is 316 core tube only, 1 or 2 braids required)
Hose Size
3/8" I.D.
Fitting Material**
Overall length in inches***
This assembly call out is 9A1TU06060606C-30 or a General Purpose Metal Hose constructed with a 321
stainless steel core tube, reinforced with 1 (single) braid 304 stainless steel jacket, welded to a 3/8" tube stub
at one end and a female JIC 3/8" swivel at that second end, both 304 stainless steel ends, 30" overall length.
(Other examples shown on following pages).
* Always Alpha Numeric TU06, not 06 TU.
** C = Stainless Steel (304 standard). 316 available upon request. No designation = Steel.
*** Centerline measurements on elbow fittings (seat measurements on Seal-Lok fittings) if special ordered.
FluidConnectors
Number
of
Braids
(#)
Outside
Diameter
(in.)
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0.41
0.47
0.53
0.65
0.71
0.77
0.77
0.83
0.89
0.96
1.02
1.08
1.16
1.22
1.28
1.47
1.53
1.59
1.75
1.83
1.91
2.08
2.16
2.24
2.61
2.69
2.77
3.40
3.50
3.60
3.88
3.98
4.08
4.96
5.06
5.16
6.00
6.13
6.25
7.01
7.14
7.26
1/4
3/8
1/2
5/8
3/4
1-1/4
1-1/2
2-1/2
Static
Min. Bend
Radius
(in.)
* Dynamic
Min. Bend
Radius
(in.)
1.0
4.5
1.2
5.0
1.5
5.5
1.8
7.0
2.1
8.0
2.7
9.0
3.1
10.0
3.9
11.0
5.1
13.0
6.8
16.0
7.8
18.0
9.8
22.0
12.8
28.0
14.8
32.0
Working
Pressure
(psi)
90
1800
2700
70
1558
2336
70
1186
1779
57
1205
1808
43
898
1347
43
718
1077
43
645
968
28
531
797
14
449
674
14
417
626
14
346
519
14
299
448
14
275
412
11
210
315
Burst
Pressure
(psi)
7233
9100
6230
9345
4743
7115
4820
7230
3591
5387
2872
4308
2581
3872
2125
3188
1797
2696
1669
2504
1384
2076
1194
1791
1099
1649
839
1259
Weight
per Foot
(lbs.)
0.04
0.11
0.18
0.10
0.20
0.30
0.11
0.22
0.33
0.17
0.33
0.49
0.19
0.37
0.55
0.26
0.50
0.74
0.29
0.61
0.93
0.47
0.85
1.23
0.59
1.11
1.63
0.84
1.64
2.44
1.18
2.06
2.94
1.41
2.47
3.53
2.18
3.61
5.04
2.69
4.44
6.19
Hose Selection
Determine and locate the size and pressure rating
required.
Note the number of braids required to support the
required pressure rating.
Consult the Fittings on pages 7 and 8 for
appropriate end configuration.
Consult How to Build Parflex Metal Hose
Assemblies on page 3.
Example
1/2" hose (-8) with a 1500 PSI WP rating would begin with
9A2 (2 braids with 321SS core tube).
If a 316L stainless steel tube is required, the callout would
begin with 9A5 (see How to Build Parflex Metal Hose
Assemblies on page 3).
FluidConnectors
Number
of
Braids
(#)
Outside
Diameter
(in.)
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0.42
0.48
0.54
0.65
0.71
0.77
0.77
0.83
0.89
0.96
1.02
1.08
1.16
1.22
1.28
1.47
1.53
1.59
1.75
1.83
1.91
2.08
2.16
2.24
2.61
2.69
2.77
3.40
3.50
3.60
3.88
3.98
4.08
4.96
5.06
5.16
6.00
6.13
6.25
7.01
7.14
7.26
1/4
3/8
1/2
5/8
3/4
1-1/4
1-1/2
2-1/2
Static
Min. Bend
Radius
(in.)
* Dynamic
Min. Bend
Radius
(in.)
0.9
3.7
1.0
4.0
1.2
4.4
1.4
5.6
1.7
6.4
2.1
7.1
2.5
7.9
3.1
8.7
4.0
10.3
5.4
12.8
6.3
14.5
7.7
17.4
10.0
21.9
11.6
25.0
Working
Pressure
(psi)
90
1800
2700
70
1558
2336
70
1186
1779
57
1205
1808
43
898
1347
43
718
1077
43
645
968
28
531
797
14
449
674
14
417
626
14
346
519
14
299
448
14
275
412
11
210
315
Burst
Pressure
(psi)
7233
9100
6230
9345
4743
7115
4820
7230
3591
5387
2872
4308
2581
3872
2125
3188
1797
2696
1669
2504
1384
2076
1194
1791
1099
1649
839
1259
Weight
per Foot
(lbs.)
0.07
0.14
0.21
0.20
0.30
0.40
0.22
0.33
0.44
0.31
0.47
0.63
0.33
0.51
0.69
0.45
0.69
0.93
0.56
0.88
1.20
0.82
1.20
1.58
0.95
1.47
1.99
1.29
2.09
2.89
1.84
2.72
3.60
2.33
3.39
4.45
3.64
5.07
6.50
4.16
5.91
7.66
Hose Selection
Determine and locate the size and pressure
rating required.
Note the number of braids required to support the
required pressure rating.
Consult Fittings on pages 7 and 8 for appropriate
end configuration.
Consult the How to Build Parflex Metal Hose
Assemblies on page 3.
Example
1-1/2" hose (-24) with a 700 PSI rating callout would begin
with 9M2 (2 braid with 321SS core tube).
If a 316L stainless steel tube is required, the callout would
begin with 9M5 (see How to Build Parflex Metal Hose
Assemblies on page 3).
FluidConnectors
Number
of
Braids
(#)
Outside
Diameter
(in.)
Static
Min. Bend
Radius
(in.)
* Dynamic
Min. Bend
Radius
(in.)
Working
Pressure
(psi)
Burst
Pressure
(psi)
Weight
per Foot
(lbs.)
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
0.52
0.62
0.62
0.74
0.70
0.82
0.82
0.94
0.97
1.09
1.19
1.31
1.39
1.51
1.75
1.87
2.07
2.19
2.55
2.67
1.1
1.1
1.2
1.2
1.4
1.4
1.6
1.6
2.2
2.2
2.8
2.8
3.5
3.5
4.1
4.1
5.1
5.1
6.7
6.7
5.0
5.0
5.1
5.1
5.5
5.5
5.7
5.7
6.1
6.1
6.5
6.5
7.9
7.9
9.4
9.4
12.2
12.2
14.6
14.6
4600
5800
4000
4800
3800
4000
2600
3700
2400
2700
2000
2200
1500
2000
1100
1600
1000
1500
750
1100
18400
23200
16000
19200
15200
16000
10400
14800
9600
10800
8000
8800
6000
8000
4400
6400
4000
6000
3000
4400
0.21
0.32
0.29
0.45
0.36
0.57
0.43
0.69
0.51
0.82
0.64
1.03
0.78
1.25
1.15
1.70
1.45
2.16
1.97
2.83
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
Hose Selection
Determine and locate the size and pressure
rating required.
Example
1/4" hose (-4) with a 5800 PSI rating callout would begin
with 9H5 (2 braids with 316SS core tube).
FluidConnectors
Fittings
Style #
Fitting
Description
01
MT
02
03
Male JIC
06
Female JIC
07
TU
For sizes 5/8 and up, tube stub length and wall
thickness must be specified consult chart
below for pressure rating.
*End user needs to ensure that the selected fittings are chemically
compatible with and are able to withstand the pressure and
temperatures of both the media and the surrounding environment.
0.010
0.012
0.014
0.016
0.020
0.028
1/16
5600
6900
8200
9500
12100
16800
0.035
0.049
0.065
0.083
0.095
0.109
0.120
0.134
0.156
0.188
1/8
8600 10900
3/16
5500
7000
1/4
4000
5100
7500 10300
5/16
4100
5900
3/8
3300
4800
6600
1/2
2500
3500
4800
6300
5/8
3000
4000
5200
6100
3/4
2400
3300
4300
5000
7/8
2100
2800
3600
4200
4900
2400
3200
3700
4200
4700
2500
2900
3300
3700
4100
4900
2400
2700
3000
3400
4000
4500
2000
2200
2500
2900
3200
10300
1
1-1/4
1-1/2
2
8100
5800
FluidConnectors
Style #
Fitting
Style #
Fitting
AL
A-LOK Swivel
Compression
Style with Two
Ferrules
Q1
UltraSeal Swivel
FC
UT
VH
VacuSeal Rigid
CGA350
CGA580
CGA590
HV
Male VacuSeal
Rigid
JC
Female Seal-Lok
Swivel Straight
MC
P6
CPI Swivel
Compression
Style with one
Ferrules
FluidConnectors
Flange
Style #
Flange
Description
9K
150#
9Y
300#
4K
150#
Schedule 40 Type A Stub with Slip-on 150 lb Flange Swivel (Lap Joint)
1Y
300#
Schedule 40 Type A Stub with Slip-on 300 lb Flange Swivel (Lap Joint)
2K
150#
2Y
300#
Schedule 10 Type C Stub with Slip-on 300 lb Flange Swivel (Lap Joint)
8K
150#
8Y
300#
Combinations:
1 Fixed, 1 Floating
2 Floating
(No hose assembly shall contain 2
fixed flanges to eliminate hose twisting)
FluidConnectors
Flange Identification
N
(# of Holes)
D2
(Bolt Circle)
D1
(O.D.)
D2
2.38
Class
Nominal
Size
1/2
D1
3.50
300
150
3/4
3.88
2.75
150
4.25
3.12
150
1 1/4
4.62
150
1 1/2
150
Class
Nominal
Size
150
D2
2.62
1/2
D1
3.75
300
3/4
4.62
3.25
300
4.88
3.50
3.50
300
1 1/4
5.25
3.88
5.00
3.88
300
1 1/2
6.12
4.50
6.00
4.75
300
6.50
5.00
150
2 1/2
7.00
5.50
300
2 1/2
7.50
5.88
150
7.50
6.00
300
8.25
6.62
150
9.00
7.50
300
10.00
7.88
11.00
9.25
12.50
10.62
150
10.00
8.50
300
150
11.00
9.50
300
10
FluidConnectors
Technical Information
Derating Factors
General Purpose Hose 9A
Minimum Bend Radius (inches)
100
12"
10
8"
6"
60
40
Notes:
5"
4"
3"
2.5"
2"
1.5"
1.25"
1" .75"
.625"
.5"
.375"
.25"
20
10
6
4
1
10
20
40
60 100
200
2000
Pressure (psi)
100
60
6"
40
5"
4"
3" 2.5"
20
2"
1.5"1.25"
1" .75"
.625"
10
.5" .375"
.25"
6
4
1
10
20
40
60 100
200
2000
Pressure (psi)
100
60
40
2"
20
1.5"
1.25"
10
1"
.75"
.625".5"
.375".3125"
.25"
6
4
1
10
20
40
60 100
200
2000
Pressure (psi)
11
FluidConnectors
Technical Information
Technical Section
Dry Gas
10
Liquid
Straight Run
150
75
45 Bend
115
60
90 Bend
75
40
180 Bend
38
19
Temperature
F
Maximum Product
Velocity (Ft./Sec.) Braided
"
3 8"
"
T321/316L
T304
70
150
200
250
300
1.00
.97
.94
.92
.88
1.00
.96
.92
.91
.86
350
400
450
500
600
.86
.83
.81
.78
.74
.85
.82
.80
.77
73
700
800
900
1000
1100
.70
.66
.62
.60
.58
.69
.64
.58
1200
1300
1400
1500
.55
.50
.44
.40
1"
1"
2"
2"
3"
4"
5"
6"
2
1
8
6
4
.01
2
4 6 8
4 68
100
10
4 6 8
1000
4 6 8
10000
8
6
4
Hose I.D.
"
"
3 8"
"
1"
4 6 8
1000
2
.1
8
6
4
2
.01
6
4
2
.001
2
4 6 8
10
4 6 8
100
4 6 8
2
10000
12
FluidConnectors
1"
8
6
4
Hose I.D.
"
Temperature
8
6
4
P + 14.7
Technical Information
Cleaning
Packaging
Fittings/Welds
Code
Testing
P1
General requirement
(low pressure air
under water)
General requirement
Bulk packed
in cardboard box
As welded
P2
Customer specified
General requirement
Customer specified
As welded
P3
General requirement
(low pressure air
under water)
General requirement
Bulk packed
in cardboard box
Welds buffed ,
fittings polished
(32 Ra)
P4
General requirement
(low pressure air
under water)
Water flushed,
hot air dried
Welds buffed ,
fittings polished
(32 Ra)
P5
General requirement
Welds buffed ,
Fittings polished
(32 Ra)
P6
Oxygen cleaned
per CGA G-4.1
Welds buffed ,
fittings polished
(32 Ra)
P7
Oxygen cleaned
per CGA G-4.1
Welds buffed ,
fittings polished
(32 Ra)
P8
Water flushed,
hot air dried
Welds buffed ,
fittings polished
(32 Ra)
P9
Welds buffed ,
fittings polished
(32 Ra)
Welds buffed ,
fittings polished
(32 Ra)
Customer specified
Customer specified
Customer specified
Customer specified
Any
P10
P11
Footnotes: 1. Buffing of welds will remove any heat discoloration due to welding, marker on hose, etc. All welds are argon purged.
2. With any gas under water test, the presence of bubbles would indicate failure.
3. Special care must be taken on these assemblies to insure that the fitting sealing surfaces are not even slightly scratched or
dented. Parker assembly standards and components must be used when assembling adapters.
4. The "Where Used" fields are listed for reference only and are not requirements or recommendations.
13
FluidConnectors
Technical Information
Ratings:
1 Excellent Resistance
2 Good Resistance
3 Fair or Conditional Resistance
X Not Recommended
T321 T316
T321 T316
T321 T316
Beer
Detergents
Benzaldehyde
Dextrose
Benzene, Benzol
Diesel Fuels
Benzine
Diethylamine
Benzoic Acid
Disodium Phosphate
Black Liquor
Ethers
Acetic Anhydride
ETHYL
Acetone
Borax
Ethyl Acetate
Acetylene
Boric Acid
Ethyl Chloride
Brake Fluid
ETHYLENE
ALCOHOLS
Amyl Alcohol
Brine Acid
Ethylene Chloride
Benzyl Alcohol
Bromic Acid
Ethylene Dichloride
Butyl Alcohol
Bromine Liquid
Ethylene Glycol
Diacetone Alcohol
Butadeine, Butylene
Ethylene Oxide
Ethyl Alcohol
Butane
Fatty Acids
Hexyl Alcohol
Butyl Acetate
FERRIC
Isobutyl Alcohol
Butyric Acid
Ferric Chloride
Isopropyl Alcohol
CALCIUM
Ferric Hydroxide
Methyl Alcohol
Calcium Busulfate
Octyl Alcohol
Calcium Bisulfide
Ferric Sulfate
Propyl Alcohol
Calcium Bisulfite
FERROUS
Calcium Carbonate
Aluminum Chloride
Calcium Chloride
Ferrous Sulfate
Calcium Hydroxide
Fluoboric Acid
Formaldehyde (50%)
CARBON
Carbon Bisulfide
FREON
Alum
Freon 11
Freon 12 (wet)
ALUMINUM
AMMONIA
Ammonia Anhydrous
Carbon Disulfide
Freon 22
Ammonia Gas
Carbon Monoxide
Fruit Juice
Ammonia Nitrate
Carbon Tetrachloride
Fuel Oils
Carbonic Acid
Furfural
AMMONIUM
Ammonium Biflouride
Castor Oil
GASOLINE
Caustic Potash
Refined Gasoline
Ammonium Casenite
Cellosolves
Sour Gasoline
Chlorine (liquid)
Gelatine
Chloroform
Glucose
Ammonium Nitrate
Chlorosulfonic Acid
Glue
Ammonium Phosphate
Glycerine
Citric Acid
Glycol
Aniline
Green Liquor
Arsenic Acid
Heptane
Hexane
BARIUM
COPPER
Copper Chloride
Barium Chloride
Copper Cyanide
Barium Hydroxide
Barium Sulfate
Creysylic Acid
Barium Sulfide
Cyclohexane
Hydrocyanic Acid
14
FluidConnectors
Technical Information
Corrosion Resistance Chart, Continued
T321 T316
T321 T316
T321 T316
Hydrofluoric Acid
Corn Oil
Hydrofluosilicic Acid
Sodium Carbonate
Fuel Oil
Sodium Chlorate
HYDROGEN
Linseed Oil
Sodium Chloride
Mineral Oil
Sodium Cyanide
Silicone Oil
Sodium Dichromate
Hydrogen Gas
Vegetable Oil
Hypochlorous Acid
Oleic Acid
Iodine
Oleum
Isopropyl Ether
Sodium Hypochlorite
Oxygen
Sodium Metaphosphate
Kerosene
Palmitic Acid
Sodium Nitrate
Ketones
Paraffin
Perchlorethylene
Petroletum
Sodium Silicate
Lard Oil
Sodium Sulfate
Sodium Thiosulphate
Stannic Chloride
LEAD
PHOSPHORIC ACID
Lead Acetate
Lead Chloride
Lead Sulfate
Photographic Solutions
Stannous Chloride
Lime Sulphur
Phthalic Anhydride
Steam
Linoleic Acid
Picric Acid
Stearic Acid
Linseed Oil
PLATING SOLUTIONS
Stoddard Solvent
Lubricants (Oil)
MAGNESIUM
Magnesium Carbonate
Sulfate Liquors
Magnesium Chloride
Sulfite Liquors
Magnesium Hydroxide
Sulphur Chloride
Magnesium Nitrate
Magnesium Oxide
Sulphur Trioxide
Magnesium Sulfate
Maleic Acid
Sulfurous Acid
Tannic Acid
Tanning Liquors
MERCURIC
Mercuric Chloride
Mercuric Cyanide
POTASSIUM
Mercury
Potassium Acetate
Tartaric Acid
Methane
Titanium Tetrachloride
Methanol
Toluene
Tetrahydrofuran
METHYL
Methyl Bromide
Tomato Juice
Trichloroethylene
Triethanolamine
Methyl Methacrylate
Triethylamine
Methylene Chloride
Trisodium Phosphate
Milk
Turpentine
Mineral Oil
Urea
Muriatic Acid
Urine
Naptha
Propane
Vinegar
Napthalene
Propylene Glycol
Propylene Oxide
Water (distilled)
NICKEL
Nickel Chloride
Pyridine
Water (sea)
Nickel Sulfate
Pyrogallic Acid
Whiskey
Silver Nitrate
Wine
Xylene
NITRIC
Soap Solutions
SODIUM
Sodium Acetate
ZINC
Nitrobenzene
Zinc Chloride
Sodium Bisulfate
Zinc Nitrate
OILS
Castor Oil
Sodium Bisulfite
Coconut Oil
Sodium Borate
15
FluidConnectors
Technical Information
RIGHT
WRONG
16
FluidConnectors
RIGHT
Technical Information
Length Calculations
For the following formulas:
L = Live Length of Hose (inches)
T = Travel (inches)
S = House Outside Diameter (see specification sheets)
Verify that the installed radius is less than the stated Minimum Bend Radius for the hose at the required working pressure.
A. Vertical Travel
B. Horizontal Travel
Lateral Offset
B. Horizontal Travel
Angular Deflection
17
FluidConnectors
Ordering Checklist
Page
Reference
Checklist Item
Specified general purpose, flexible, or high pressure hose (9A, 9M, or 9H).
Code number identifies appropriate tube material and number of braids (consult chart). ............. page 3
Specified stainless steel or steel ends (For stainless, 304 is standard, 316 is available.) ........... page 3
Special testing, cleaning and packaging specified and called out clearly (refer to chart). ........... page 13
Consulted Technical Section for working pressure derating factors
and maximum fluid velocities. ............................................................................................ pages 11 & 12
Flanges identified by style, # rating, bolt pattern and whether they are fixed or floating. .... pages 9 & 10
Tube stubs correctly identified pressure ratings (5/8" and above). ............................................... page 7
Considered that the working pressure of the hose assembly is equal
to the lowest pressure rated component ............................................................................... pages 7 10
18
FluidConnectors
Cork Processing
Diesel Engines & Distribution
Die Castings
Expansion Lines
Fire Extinguishers
Food Processing
Foundries
Gas Cylinder Filling
Gas Lines
Glass Making
Glue Manufacturing
Grain Elevators
Grinding Machines
Hat Manufacturing
High Temperature Air Handling
Hydraulic Lines
Instrument Manufacturing
Laundry Equipment
Light Bulb Manufacturing
LNG Installations
Loading and Unloading Equipment
Lumber Processing
Milk and Egg Drying Machinery
Milk Handling
Mine Pumps
Molding Machines
Mud Guns
OEM Test Cell Pumps
Oil Burners
Oil Lines
Oil Refineries
Ore Thawing
Paint Making
Paper Manufacturing and Processing
Plastic Plants/Pellet Conveying
Platen Presses
Plumbing
Power & Utilities
Quarry Pipes
Radiators
Railroad Cars
Railroad Shops
Railroad Yards
Road Machinery
Rubber Plants
Sewage Treatment
Ship Yards
Shoe Cement Machinery
Soap Manufacturing
Steam Lines
Steel and Mill Furnaces
Sugar Refineries
Testing Boiler Stands
Textile Machinery
Truck Service Centers
Toy Making
Water Cooling
Water Works
Weed Burners
Wood Curing Machinery
*Size, temperature, application criteria, media and pressure must always be considered when ordering Metal
Hose. The end user is responsible for final application and should perform tests within those parameters.
Reference Parker Safety Guide included in this publication on pages 20 and 21.
19
FluidConnectors
DANGER: Failure or improper selection or improper use of hose, fittings, or related accessories can cause death, personal
injury and property damage. Possible consequences of failure or improper selection or improper use of hose, fittings, or related
accessories include but are not limited to:
Before selecting or using any Parker hose or fittings or related accessories, it is important that you read and follow the instructions below.
1.0 GENERAL INSTRUCTIONS
1.1 Scope: This safety guide provides instructions for selecting and using
(including assembling, installing, and maintaining) hose (including all
rubber and/or plastic products commonly called hose or tubing), fittings
(including all products commonly called fittings or couplings for
attachment to hose), and related accessories (including crimping and
swaging machines and tooling). This safety guide is a supplement to and is
to be used with, the specific Parker publications for the specific hose,
fittings and related accessories that are being considered for use.
1.2 Fail-Safe: Hose and hose assemblies can and do fail without warning for
many reasons. Design all systems and equipment in a fail-safe mode, so
that failure of the hose or hose assembly will not endanger persons or
property.
1.3 Distribution: Provide a copy of this safety guide to each person that is
responsible for selecting or using hose and fitting products. Do not select
or use hose and fittings without thoroughly reading and understanding this
safety guide as well as the specific Parker publications for the products
considered or selected.
1.4 User Responsibility: Due to the wide variety of operating conditions and
uses for hose and fittings, Parker and its distributors do not represent or
warrant that any particular hose or fitting is suitable for any specific end
use system. This safety guide does not analyze all technical parameters
that must be considered in selecting a product. The user, through its own
analysis and testing, is solely responsible for:
Making the final selection of the hose and fitting.
Assuring that the users requirements are met and that the use presents
no health or safety hazards.
Providing all appropriate health and safety warnings on the equipment on
which the hose and fittings are used.
1.5 Additional Questions: Call the appropriate Parker technical service
department if you have any questions or require any additional information.
See the Parker publication for the product being considered or used, for
telephone numbers of the appropriate technical service department.
2.0 HOSE AND FITTING SELECTION INSTRUCTIONS
2.1 Electrical Conductivity: Certain applications require that a hose be
nonconductive to prevent electrical current flow. Other applications require
the hose to be sufficiently conductive to drain off static electricity. Extreme
care must be exercised when selecting hose and fittings for these or any
other applications in which electrical conductivity or nonconductivity is a
factor.
For applications that require hose to be electrically nonconductive,
including but not limited to applications near high voltage electric lines,
only special nonconductive hose can be used. The manufacturer of the
equipment in which the non-conductive hose is to be used must be
consulted to be certain that the hose and fittings that are selected are
proper for the application. Do not use any Parker hose or fitting for any
such application requiring nonconductive hose, including but not limited to
applications near high voltage electric lines, unless (i) the application is
expressly approved in the Parker technical publication for the product, (ii)
the hose is both orange color and marked nonconductive, and (iii) the
manufacturer of the equipment on which the hose is to be used specifically
approves the particular Parker hose and fitting for such use.
20
FluidConnectors
21
FluidConnectors
Offer of Sale
2. Payment: Payment shall be made by Buyer net 30 days from the date of
delivery of the items purchased hereunder. Amounts not timely paid shall
bear interest at the rate of 1-1/2% for each month or a portion thereof that
Buyer is late in making payment. Any claims by Buyer for omissions or
shortages in a shipment shall be waived unless Seller receives notice
thereof within 30 days after Buyers receipt of the shipment.
12. Entire Agreement/Governing Law: The terms and conditions set forth
herein, together with any amendments, modifications and any different
terms or conditions expressly accepted by Seller in writing, shall constitute
the entire Agreement concerning the items sold, and there are no oral or
other representations or agreements which pertain thereto. This Agreement
shall be governed in all respects by the law of the State of Ohio. No actions
arising out of the sale of the items sold hereunder or this Agreement may be
brought by either party more than two (2) years after the cause of action
accrues.
7. Special Tooling: A tooling charge may be imposed for any special tooling,
including without limitation, dies, fixtures, molds and patterns, acquired to
manufacture items sold pursuant to this contract. Such special tooling shall
be and remain Sellers property notwithstanding payment of any charges
therefor by Buyer. In no event will Buyer acquire any interest in apparatus
belonging to Seller which is utilized in the manufacture of the items sold
hereunder, even if such apparatus has been specially converted or adapted
for such manufacture and notwithstanding any charges paid by Buyer
therefor. Unless otherwise agreed, Seller shall have the right to alter,
discard or otherwise dispose of any special tooling or other property in its
sole discretion at any time.
The items described in this document are hereby offered for sale at prices
to be established by Parker Hannifin Corporation, its subsidiaries and its
authorized distributors. This offer and its acceptance by any customer
(Buyer) shall be governed by all of the following Terms and Conditions.
Buyers order for any item described in this document, when communicated
to Parker Hannifin Corporation, its subsidiary or an authorized distributor
(Seller) verbally or in writing, shall constitute acceptance of this offer.
22
FluidConnectors
FluidConnectors
Central Region
Sales Office & Service Center
Hiawatha, IA
(319) 393-1221
(319) 393-1224 FAX
Northeast Region
Sales Office & Service Center
Trenton, NJ
(609) 586-5151
(609) 586-3149 FAX
Cleveland Region
Sales Office
Cleveland, OH
(216) 896-3000
(216) 896-4022 FAX
Service Center
Toledo, OH
(419) 878-7000
(419) 878-7001 FAX
Pacific Region
Sales Office & Service Center
Portland, OR
(503) 283-1020
(503) 283-2201 FAX
Service Center
Buena Park, CA
(714) 522-8840
(714) 994-1183 FAX
Southeast Region
Sales Office & Service Center
Greensboro, NC
(336) 373-1761
(336) 378-0913 FAX
Service Center
Conyers, GA
(770) 929-0330
(770) 929-0230 FAX
Minneapolis Region
Sales Office & Service Center
Minneapolis, MN
(952) 469-5000
(952) 469-5729 FAX
Service Center
Oshkosh, WI 54901
(414) 426-8471
(414) 426-8570 FAX
Southwest Region
Sales Office & Service Center
Mansfield, TX
(817) 473-4431
(817) 473-8078 FAX
Canada
Sales Office & Service Center
Grimsby, ON
(905) 945-2274
(905) 945-3946 FAX
(Contact Grimsby for other
Service Center locations.)