Professional Documents
Culture Documents
U31 V12!11!40 SoftwareInstallationGuide en
U31 V12!11!40 SoftwareInstallationGuide en
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright 2011 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited.
Revision History
Revision No.
Revision Data
Revision Reason
R1.0
2012-01-10
Introduction
This manual is NetNumen U31 R22 (V12.11.40) Unified Network Management System
Software Installation Guide. It contains the following contents:
Chapter
Summary
Describes how to install the U31 R22 server and U31 R22 client.
Describes how to start up and shut down U31 R22 server, and
how to log in to or exit U31 R22 client.
Describes how to uninstalling the U31 R22 server and U31 R22
client.
Intended Audience
This manual is intended for:
l
l
l
Planning Engineers
U31 R22 Monitoring Personnel
Maintenance Engineers
Conventions
The following safety signs may appear in this manual.
Safety Sign
Meaning
A serious accident, such as casualties or equipment damage may
Danger
Warning
Caution
Safety Sign
Meaning
tive.
II
Table of Contents
About This Manual ......................................................................................... I
Chapter 1 Installing the U31 R22............................................................... 1-1
1.1 Software Installation Flow ................................................................................... 1-1
1.2 Installing the U31 R22 On the Windows OS ......................................................... 1-2
1.2.1 Installing the U31 R22 Server and Client.................................................... 1-2
1.2.2 Installing the U31 R22 Client ................................................................... 1-13
1.3 Installing the U31 R22 On the Solaris OS........................................................... 1-19
1.3.1 Installation Instructions ........................................................................... 1-19
1.3.2 Server Configuration............................................................................... 1-20
1.3.3 Preparation Before Installation ................................................................ 1-23
1.3.4 Installing the U31 R22 Server.................................................................. 1-27
1.3.5 Installing Licenses .................................................................................. 1-33
1.4 Installing the U31 R22 On the Linux OS............................................................. 1-33
1.4.1 Installation Instruction ............................................................................. 1-33
1.4.2 Configuration Requirement for the Server ................................................ 1-34
1.4.3 Preparation Before Installation ................................................................ 1-36
1.4.4 Installing the U31 R22 Server.................................................................. 1-37
1.4.5 Installing License.................................................................................... 1-45
Figures............................................................................................................. I
Tables ............................................................................................................ III
Glossary .........................................................................................................V
II
Chapter 1
The software installation of the U31 R22 system includes two parts: software installation
on the server, and software installation on the client.
l
l
On the server, install the operating system, database, and U31 R22 server software.
On the client, install the operating system and the U31 R22 client software.
1-1
SJ-20111118090716-003|2012-01-10 (R1.0)
Maximum
Windows Server
Equivalent NEs
Number of
(For Integrated
Clients
Configuration)
Configuration)
16
CPU: dual-core
CPU: dual-core
Memory 4 GB
Memory 4 GB
CPU: 2 x dual-core or
300
1000
32
four-core
3000
8000
64
128
Memory 4 GB
Memory 4 GB
CPU: 2 x four-core
CPU: 2 x four-core
Memory 8 GB
Memory 8 GB
Hard disk200 GB
CPU: 4 x four-core
Main frequency 3 GHz
Memory 16 GB
Hard disk 200 GB
Disk array sub-card
At least three hard disks (SCSI
SAS interfaces) of the same
configuration.
1-2
SJ-20111118090716-003|2012-01-10 (R1.0)
The Number of
Maximum
Windows Server
Equivalent NEs
Number of
(For Integrated
Clients
Configuration)
Configuration)
200
CPU: 4 x four-core
20000
Operating system
Database
Redundancy scheme
Veritas
software
1-3
SJ-20111118090716-003|2012-01-10 (R1.0)
c.
Check whether the status of "Local Area Connection" is normal and whether the
network communication is normal.
Prerequisite
l
l
l
l
Context
If U31 R22 has been installed in the server, please uninstall the program at first and then
delete it. Afterwards, do the following steps.
Steps
1. Log in to the Windows operating system as the administrator role.
2. Get the installation package from the U31 R22 installation CD. Run the setup.bat
program.
3. When prompted to open the unzip path, press the Enter key to unzip the installation
files under the default path.
4. After the installation files are unzipped, the Select language window appears. Select
English.
1-4
SJ-20111118090716-003|2012-01-10 (R1.0)
l
l
Caution!
Currently, only Scale 2 is supported when U31 R22 is managing BN-xTN
(IPTN&OTN) products.
U31 R22 does not support cross-scale data backup restoration or the incremental
upgrades of different scales.
Description
Scale 1
l
Scale 2
1-6
SJ-20111118090716-003|2012-01-10 (R1.0)
Scale
Description
Scale 3
Scale 4
Scale 5
Caution!
When only BN-xTN is installed (BN-IP is not selected), do not select Wireline
Management components.
1-7
SJ-20111118090716-003|2012-01-10 (R1.0)
Database IP or hostname
Explanation
Select the database type of the U31 R22 server, options: Oracle
and Microsoft SQL Server.
Enter the IP address or host name of the computer on which the
U31 R22 server database is installed.
Set the port number of the database instance. The default value
Database port
is recommended.
If several database instances have been created, use the port
number of the instance used by the U31 R22 system.
Password
16. After configuring the parameters, click Test Database Connection to check if the
database can be successfully connected.
1-8
SJ-20111118090716-003|2012-01-10 (R1.0)
17. If the Message dialog box appears, indicating that the connection is successful, click
OK to return to the Database connection config window. Then click Next to open
the Database config page.
Note:
If the connection fails, remove the database connection fault first, and then continue
the installation of U31 R22.
18. Set the save paths and sizes of database files as needed.
1-9
SJ-20111118090716-003|2012-01-10 (R1.0)
Description
address
Distributed servers
configuration
1-10
SJ-20111118090716-003|2012-01-10 (R1.0)
22. If the detection result of each Detect Item is Pass, click Next to open the Installation
Information Confirm page.
Note:
If the detection result of any Detect Item is Not Pass, remove the fault according to the
indication, and then continue to install U31 R22.
23. After confirming that the installation information is correct, click Install to open the
Unzip and copy files page.
24. After all files are unzipped and copied, click Next. The Confirm dialog box appears,
asking you whether to execute the SQL scripts now.
25. Click Yes to open the Install database page, and the installation of database starts.
26. After the SQL scripts are executed, click Next to open the Parameter Set page.
1-11
SJ-20111118090716-003|2012-01-10 (R1.0)
Note:
After the installation you may run NetNumen Configuration Center to modify the
parameters.
27. Click Next to open the System initialization page. The Confirm dialog box appears,
asking you whether to initialize all client scenes.
28. Click Yes.
29. After the system is initialized, click Next to open the Installation finished page.
30. Click Finish.
End of Steps
Result
The selected components of U31 R22 are installed on the computer.
SJ-20111118090716-003|2012-01-10 (R1.0)
Context
Caution!
To run U31 R22 server, License must have been installed, while to run U31 R22 client
License is not necessary.
Steps
1. Log in the Windows operating system as Administrator.
2. Search the ums-license.LCS file in the U31 R22 directory where the server has been
installed.
Note:
During the process for installing U31 R22, License may be saved at different directories
based on different network scales.
For example, when you select Scale 1 for the network scale, License will be saved in
ums-server\works\uep\deploy. While, when you select Scale 2/Scale 3/Scale 4/Scale
5, License will be saved in ums-server\works\main\deploy.
3. Copy the authorized License ums-license.LCS, and use it to replace the default file of
the same name.
l
l
Note:
License must be named as ums-license.LCS, otherwise, the user cannot use it
properly.
The default ums-license.LCS file does not support any U31 R22 operation.
Therefore, you must replace it with the authorized License.
End of Steps
300
CPU: dual-core
CPU frequency3 GHz
Memory1 GB
Hard disk80 GB
1000
CPU: dual-core
CPU frequency3 GHz
Memory1 GB
Hard disk80 GB
3000
CPU: dual-core
CPU frequency3 GHz
Memory2 GB
Hard disk80 GB
8000
CPU: dual-core
CPU frequency3 GHz
Memory4 GB
Hard disk80 GB
20000
CPU: dual-core
CPU frequency3 GHz
Memory8 GB
Hard disk80 GB
Configuration
Operating system
Browser
Document viewer
Antivirus software
1-14
SJ-20111118090716-003|2012-01-10 (R1.0)
Prerequisite
l
l
Steps
1. Log in to the Windows operating system as the administrator role.
2. Get the installation package from the U31 R22 installation CD. Run the setup.bat
program.
3. When prompted to enter the unzip path, press the ENTER key to unzip the installation
files under the default path.
4. After the installation files are unzipped, the Select language window appears. Select
English.
1-15
SJ-20111118090716-003|2012-01-10 (R1.0)
Note:
Select product: Select the device types in the network and the U31 R22 product
components to install. It is recommended to select BN-MSTP, BN-CTN, and
BN-OTN below BN-xTN. The user can select BN Northbound Interface
(NetNumen T37) according to the needs. It is recommended to select E2E.
Set the installation path: Select the default path for installing the program, or click
Browse... to set other installation paths.
1-17
SJ-20111118090716-003|2012-01-10 (R1.0)
12. If the detection result of each Detect Item is Pass, click Next to enter the Installation
Information Confirm page.
Note:
If the detection result of any Detect Item is Not Pass, remove the fault according to the
indication, and then continue to install U31 R22.
13. After confirming that the installation information is correct, click Install to enter the
Unzip and copy files page.
14. After all files are unzipped and copied, click Next to enter the Parameter Set page.
1-18
SJ-20111118090716-003|2012-01-10 (R1.0)
15. The default settings are recommended. Click Next to enter the System initialization
page. The Confirm dialog box appears, asking you whether to initialize all client
scenes.
16. Click Yes.
17. After the system is initialized, click Next to enter the Installation finished page.
18. Click Finish.
End of Steps
Result
The selected components of the U31 R22 client are installed on the computer.
1-19
SJ-20111118090716-003|2012-01-10 (R1.0)
Windows Server
Equivalent NEs
(For Integrated
Configuration)
Connected
Configuration)
16
CPU: dual-core
CPU: dual-core
Main frequency 2
300
GHz
1000
32
Memory 8 GB
Memory 8 GB
CPU: dual-core or
four-core
Main frequency 2
GHz
Memory 8 GB
Memory 8 GB
Single computer:
Hard disk
300G
l
Local dual
computer: Disk
array
Specification:
mode
Capacity 300G
l
Quantity:
Four, in RAID
5+SPARE mode
Capacity 300G
interface) 2 x 300G
Remote dual
computer:
Each sever is
configured with
the same hard
disk (SCSI SAS
1-20
SJ-20111118090716-003|2012-01-10 (R1.0)
Number of
Windows Server
Equivalent NEs
(For Integrated
Configuration)
Connected
Configuration)
interface) 2 x
300G
3000
64
CPU: 4 x four-core
Main frequency 2 GHz
Memory 16 GB
Hard disk 300 GB
l
8000
128
CPU: 4 x four-core
Main frequency 2 GHz
Memory 24 GB
Hard disk 600 GB
l
1-21
SJ-20111118090716-003|2012-01-10 (R1.0)
Number of
Windows Server
Equivalent NEs
(For Integrated
Configuration)
Connected
Configuration)
l
20000
200
CPU: 4 x six-core
Main frequency 2 GHz
Memory 48 GB
Hard disk 600 GB
Disk array for both single
computer and dual computer
Specification: SAS hard disk
Quantity: 11, in RAID 5 mode
Capacity 300G
l
l
Note:
Standard confutation for the Window server: Windows Server 2008 (64 bits) + SQL
Server 2008 (64 bits).
If the memory of the Windows server is larger than 4G, you need to configure the
enterprise edition operation system and the dual-computer software of the enterprise
edition Veritas.
For the dual-computer configuration of the EMS server whose manageable Equivalent
NE quantity is 1000 3000 or 8000, the remote dual-computer configuration mode is
recommended.
For the dual-computer configuration of the EMS server whose manageable Equivalent
NE quantity is 2000, the local dual-computer configuration mode is recommended.
1-22
SJ-20111118090716-003|2012-01-10 (R1.0)
Operating
Configuration
Solaris 10
system
requirements:
l
Database
Oracle 10g
Other software
FTP client
X graphical tool
Prerequisite
The Solaris 10 operating system allows remote login of the root user.
Context
By default, the root user cannot log in to the system in remote login mode. If you want the
root user to log in to the server remotely, you are required to modify the server configuration
in the following way:
1. On the desktop of the server PC, navigate to the This Computer > File System > etc
> default directory.
2. Open the login file.
3. Find the CONSOLE=/dev/console line, and enter # at the beginning of the line. That
is, change CONSOLE=/dev/console into #CONSOLE=/dev/console.
The Xmanager mentioned in this section is version 3.0.
Steps
1. On the client PC, select Start > Programs > Xmanager Enterprise 3 > Xbrowser.
The Xbrowser dialog box appears.
2. On the Xmanager navigation tree in the left pane, select the static menu.
1-23
SJ-20111118090716-003|2012-01-10 (R1.0)
3. In the address bar, enter the server IP address and press Enter. A dialog box appear,
prompting you to enter the user name.
4. Enter the user name, and click OK. A dialog box appears, prompting you to enter the
password.
5. Enter the password and click OK to log in to the remote server.
End of Steps
Steps
1. On the server PC, select Launch > Applications > Utilities > Terminal. The Terminal
dialog box appears.
2. Enter the ps ef | grep oracle command, and then press the Enter key.
3. Set the Oracle database based on the command display.
If
Then
su - oracle
ii.
oracle
startup
Note:
The Oracle database processes start with ora_. Oracle monitoring process is
/export/home/builder/oracle/product/10.2.0/db_1/bin/tnslsnr LISTENER inherit.
1-24
SJ-20111118090716-003|2012-01-10 (R1.0)
4. On the desktop of the server PC, double-click the This Computer icon. The This
Computer window appears.
5. Select the Edit > Preferences menu.
6. In the Views page of the dialog box that appears, select Show hidden and backup
files, and then click Close.
7. (Optional) If the .profile file does not exist, create the .profile file.
Note:
If the directory for installing the Oracle database is /export/home/builder/orac
le/product/10.2.0/db_1, create the .profile file in the /export/home/bui
lder/oracle/ directory.
8. In the .profile file, add the environment variables of the Oracle database.
1-25
SJ-20111118090716-003|2012-01-10 (R1.0)
Environment Variable
Description
ORACLE_HOME=/export/home/builder/ora-
cle/product/10.2.0/db_1
ORACLE_BASE=/export/home/builder/oracle/
ORACLE_SID=uep
PATH=$PATH:$ORACLE_HOME/bin
LANG=zh_CN.GBK
NLS_LANG=AMERICAN_AMER-
ICA.ZHS16GBK
Context
The FTP server refers to the PC on which the U31 R22 server is installed.
The FTP software used in this section is Filezilla.
Steps
1. On the FTP client, start the FTP software.
2. In the FTP window, enter the FTP server IP address, user name, password, and port
number.
3. Click the Fast Connect button to connect to the FTP server.
4. Drag the U31 R22 installation files from the FTP client to a directory of the FTP server.
End of Steps
1-26
SJ-20111118090716-003|2012-01-10 (R1.0)
Steps
1. On the desktop of the server PC, navigate to the This Computer > File System > etc
> inet directory.
2. Open the service file in the directory.
3. Find the row of FTP, and change the port number to another idle port.
For example, you can change the port number to 2121.
Steps
1. Navigate to the directory of the U31 R22 installation files, and double-click setup.sh
to start the U31 R22 installation.
2. In the Selection Language dialog box, set the language to English, and then click
Next.
1-27
SJ-20111118090716-003|2012-01-10 (R1.0)
3. In the License agreement dialog box, select I accept the license agreement, and
then click Next.
4. In the Select installation style dialog box, set Available installation styles to
Normal installation, and set Available installation types to Server Program, and
then click Next.
1-28
SJ-20111118090716-003|2012-01-10 (R1.0)
5. In the Hierarchy configuration dialog box, accept the default settings, and then click
Next.
6. In the Network Scale dialog box, set the required scale according to the network size
and the hardware configuration of the U31 R22 server, and then click Next.
l
l
Caution!
Currently, only Scale 2 is supported when U31 R22 is managing BN-xTN
(IPTN&OTN) products.
U31 R22 does not support cross-scale data backup restoration or the incremental
upgrades of different scales.
Description
Scale 1
Scale 2
Scale 3
SJ-20111118090716-003|2012-01-10 (R1.0)
Scale
Description
Scale 4
Scale 5
7. In the Select product dialog box, set the functions of the U31 R22 server and
installation path, and then click Next.
Caution!
When only BN-xTN is installed (BN-IP is not selected), do not select Wireline
Management components.
8. In the Database connection config dialog box, set Database IP or hostname and
Password of the database superuser.
1-30
SJ-20111118090716-003|2012-01-10 (R1.0)
9. Click the Test Database Connection button to test the status of the connection
between the U31 R22 installation program and the database.
10. If the connection to the database is normal, click Next.
Note:
If the connection is abnormal, fix the database connection fault, and then continue the
U31 R22 installation.
11. In the Database config dialog box, modify the database saving paths and database
file sizes, and then click Next.
1-31
SJ-20111118090716-003|2012-01-10 (R1.0)
12. In the Host information config dialog box, enter the master server address, and then
click Next.
Steps
1. Install licenses.
If
Then
Scale1.
s\main\deploy directory.
Note:
If the network scale is Scale1 and the U31 R22 is installed in the /export/home/b
uilder/U31/ directory, the licenses are installed in the /export/home/builder
/U31/ums-server/works/uep/deploy/ directory.
End of Steps
1-33
SJ-20111118090716-003|2012-01-10 (R1.0)
The
Number
Number of
of Valid
Accessible
NEs
Clients
300
16
Memory 8G
Memory 8G
Memory 8G
Memory 8G
1000
32
300G
array
mode
SPARE mode
Capacity 300G
l
Capacity 300G
l
300G
* 300G
1-34
SJ-20111118090716-003|2012-01-10 (R1.0)
The
The
Number
Number of
of Valid
Accessible
NEs
Clients
3000
64
8000
128
1-35
SJ-20111118090716-003|2012-01-10 (R1.0)
The
The
Number
Number of
of Valid
Accessible
NEs
Clients
20000
200
Note:
If performing cluster configurations on the NM servers, the numbers of valid NEs of
which are 1000, 3000 or 8000, it is recommended to use remote cluster configuration
mode.
If performing cluster configurations on the NM servers, the numbers of valid NEs of
which are 20000, it is recommended to use local cluster configuration mode.
Object
Operating system
Database
Redundancy
solution software
SJ-20111118090716-003|2012-01-10 (R1.0)
Note:
If the FTP ports of the operating system are not disabled, conflicts take place
between FTP ports of the operating system and U31 R22 FTP ports, which results in
unavailable U31 R22 FTP functions.
Prerequisite
l
l
l
Steps
1. Log in to the U31 R22 server as the root user.
2. Open the terminal, enter the directory for server installation, execute the following
command:
# ./setup.sh
The NetNumen Setup-Select Language dialog box is displayed, see Figure 1-2.
1-37
SJ-20111118090716-003|2012-01-10 (R1.0)
1-38
SJ-20111118090716-003|2012-01-10 (R1.0)
1-39
SJ-20111118090716-003|2012-01-10 (R1.0)
1-40
SJ-20111118090716-003|2012-01-10 (R1.0)
Note:
Each scale has different requirements for the server configurations. If the current
configuration is lower than the configuration requirements of corresponding scale, the
U31 R22 performance is affected.
7. Based on the tips in the left pane and current server configurations, select network
scale, and click Next.
The NetNumen Setup-Select Product dialog box is displayed, see Figure 1-6.
Figure 1-6 NetNumen Setup-Select Product Dialog Box
Note:
Because BN-xTN CTN and BN-IP Management are incompatible, only one of them
can be installed. When selecting all product, BN-xTN CTN is selected by default.
BN-IP Management and the Wireline Management cannot be installed independently.
As a result, they must be both selected if one of them is required to be installed.
The software installation path fails to support the following characters: Chinese, + in
English, !, @, # and &.
1-41
SJ-20111118090716-003|2012-01-10 (R1.0)
8. Select the products to be installed, set the installation path, and click Next.
The NetNumen Setup-Database Connection Configuration dialog box is displayed,
see Figure 1-7.
Figure 1-7 NetNumen Setup-Database Connection Configuration Dialog Box
Description
Database type
Database IP or hostname
Database port:
Password
1-42
SJ-20111118090716-003|2012-01-10 (R1.0)
9. Set related parameters, click Test Database Connection to verify the connection.
l In case of successful connection, proceed the installation.
l In case of unsuccessful connection, troubleshoot the database connection and
proceed the connection.
10. Click Next
The NetNumen Setup-Host Information Configuration dialog box is displayed, see
Figure 1-8.
Figure 1-8 NetNumen Setup-Host Information Configuration Dialog Box
11. Set the address of the active server (U31 R22 server), and click Next.
The system starts to detect the database and operating system, and later displays the
detection results after completing the detection, see Figure 1-9.
1-43
SJ-20111118090716-003|2012-01-10 (R1.0)
1-44
SJ-20111118090716-003|2012-01-10 (R1.0)
Prerequisite
l
l
Steps
1. Log in to the U31 R22 server as the root user.
1-45
SJ-20111118090716-003|2012-01-10 (R1.0)
2. Based on the scale selected during U31 R22 installation, copy the License file to a
corresponding directory.
l If selecting scale 1, copy License to the .../ums-server/works/uep/depl
oy directory.
l If selecting other scale, copy License to the .../ums-server/works/main/d
eploy directory.
For example, if selecting scale 1, U31 R22 is installed in the /opt/netnumen
directory, copy the License file to the /opt/netnumen/ums-server/works/uep/
deploy directory.
End of Steps
1-46
SJ-20111118090716-003|2012-01-10 (R1.0)
Chapter 2
Steps
l
On the desktop of the Windows operating system, select Start > All Programs >
NetNumen Unified Management System > NetNumen Client, and the Login dialog
box appears.
End of Steps
Steps
1. On the desktop of the Windows operating system, select Start > Programs >
NetNumen Unified Management System > NetNumen Client, and the Login dialog
box appears.
2-1
SJ-20111118090716-003|2012-01-10 (R1.0)
2. Enter User Name, Password, and Server Address in the Login window.
Caution!
In the U31 R22, the default user name is admin, and the password is null. Be sure to
modify the password of the admin user after successful login for the first time to ensure
the account security.
Tip:
on the right side of the server address to display
In the Login window, click
the Config Bureau dialog box. In the Config Bureau dialog box, you can configure
bureau name and the corresponding server address. The configuration information
will be displayed in the drop-down list of the Server Address to facilitate the user to
select.
3. Click OK.
End of Steps
Prerequisite
l
l
The client computer works normally, and the network communication is normal.
The client is connected to the server.
2-2
SJ-20111118090716-003|2012-01-10 (R1.0)
Steps
1. Select System > Exit in the U31 R22 client window.
2. Click OK in the Confirm message box to close the client.
End of Steps
The U31 R22 server computer works normally, and the network communication is
normal.
Each process of U31 R22 server works normally.
Close all the clients that connect to the server.
Steps
1. You have already logged in to Windows operating system where the U31 R22 server
is installed.
2. Enter the console interface from Windows desktop.
3. Select each process in the console according to the following sequence, and then click
Stop.
Sequence
Process
BN SDH/OTN Adaptive 1
BN main process 1
UEP process 1
4. If the following requirements are satisfied at the same time, U31 R22 server is closed
successfully:
i.
ii.
The information xxx process - Stopped is displayed in the bottom of the window.
2-3
SJ-20111118090716-003|2012-01-10 (R1.0)
5. Select System > Exit, and then select OK in the message box that appears.
End of Steps
Steps
1. Navigate to the startup directory of the U31 R22 server.
Note:
If the U31 R22 is installed in the /export/home/builder/U31/ directory, the
startup directory of the U31 R22 server is /export/home/builder/U31/ums-se
rver/.
Steps
1. In the U31 R22 console window, exit the following U31 R22 processes according to
the sequence in the following table.
Sequence
Process
BN SDH/OTN Adaptive 1
2-4
SJ-20111118090716-003|2012-01-10 (R1.0)
Sequence
Process
BN main process 1
UEP process 1
a. In the left navigation tree, click the name of the required process.
b. In the right pane, click Stop.
c. If the following requirements are met, repeat the above two steps to stop the other
processes in turn.
l In the process control operation column, the icon of the process is in the
state.
In the left pane, the icon before the process name is in the
state.
2. Select System > Exit. In the message box that appears, click Yes to exit the U31 R22
server.
End of Steps
Steps
1. Log in to the U31 R22 server as the root user.
2. Open the terminal, enter the ums-server directory in the U31 R22 installation directory,
and execute the following commands to start the U31 R22 server.
# ./console.sh
During starting the server, the NetNumen U31 Unified Network Management
System-Console dialog box is displayed, see Figure 2-1.
2-5
SJ-20111118090716-003|2012-01-10 (R1.0)
Steps
1. Log in to the U31 R22 server as the root user.
2. Open the terminal, enter the ums-server directory in the U31 R22 installation directory,
and execute the following commands to quit the U31 R22 server.
# ./console.sh
End of Steps
2-6
SJ-20111118090716-003|2012-01-10 (R1.0)
Chapter 3
The U31 R22 server software has stopped working and the U31 R22 client has been
logged out.
You have logged into the Windows operating system as the administrator role.
Steps
1. In the Windows system of the computer installed with the U31 R22 server and client
software, select Start > Programs > NetNumen Unified Management System >
NetNumen Unintall Tool. The Uninstall dialog box appears.
2. Select whether to uninstall the database.
3-1
SJ-20111118090716-003|2012-01-10 (R1.0)
l
l
Select Uninstall database: delete all the datum in the database of U31 R22.
Clear Uninstall database: keep the datum in the database of U31 R22.
Result
The U31 R22 server and client are uninstalled from the computer.
3-2
SJ-20111118090716-003|2012-01-10 (R1.0)
Steps
1. In the Windows operating system on which the U31 R22 client software is installed,
select Start > Programs > NetNumen Unified Management System > NetNumen
Unintall Tool. The Uninstall dialog box appears.
2. Click Next. The Uninstall description window appears.
3. Click Start uninstall.
4. (Optional) If you have selected Uninstall database in the previous step, the Confirm
dialog box appears, prompting you to back up data before uninstallation. Click Yes.
5. The Confirm dialog box appears. Click Yes. The Start uninstall window appears.
6. After uninstallation, click Finish.
End of Steps
Result
The U31 R22 client is uninstalled from the computer.
Prerequisite
The services of the U31 R22 server have stopped and the U31 R22 client has exited.
Steps
1. Navigate to the uninstall directory of the U31 R22 server.
Note:
If the U31 R22 is installed in the /export/home/builder/U31/ directory, the
uninstall directory of the U31 R22 server is /export/home/builder/U31/uif/.
2. Double-click the uninstalltool.sh file to start uninstall the U31 R22 server.
l Select Uninstall database: After the database is uninstalled, the database data
related to the U31 R22 is also deleted.
l Do not select Uninstall database: After the database is uninstalled, the database
data related to the U31 R22 is also not deleted.
3. Click Next. The Uninstall description dialog box appears.
3-3
SJ-20111118090716-003|2012-01-10 (R1.0)
Prerequisite
Both the U31 R22 server and clients have quit from the Linux platform.
Steps
1. Log in to the U31 R22 server as the root user.
2. Open the terminal, enter the uif directory in the U31 R22 installation directory, and
execute the following command.
# ./uninstalltool.sh
The Uninstall database selection dialog box is displayed, see Figure 3-1.
3-4
SJ-20111118090716-003|2012-01-10 (R1.0)
l
l
Select Uninstall database to uninstall the U31 R22 software and the involved
database data.
Do not select Uninstall database to uninstall the U31 R22 software and keep the
involved database data.
3. Decide whether to uninstall the database based on actual situation, and click Next.
U31 R22The Uninstall description dialog box is displayed.
4. Click Start Install.
5. After completing uninstallation, click Finish.
End of Steps
3-5
SJ-20111118090716-003|2012-01-10 (R1.0)
3-6
SJ-20111118090716-003|2012-01-10 (R1.0)
Figures
Figure 1-1 Software Installation Flow of the U31 R22 System ................................... 1-1
Figure 1-2 NetNumen Setup-Select Language Dialog Box ...................................... 1-38
Figure 1-3 NetNumen Setup-Select Installation Style Dialog Box ............................ 1-39
Figure 1-4 NetNumen Setup-Hierarchy Configuration Dialog Box ........................... 1-40
Figure 1-5 NetNumen Setup-Network Scale Dialog Box.......................................... 1-40
Figure 1-6 NetNumen Setup-Select Product Dialog Box ......................................... 1-41
Figure 1-7 NetNumen Setup-Database Connection Configuration Dialog
Box ....................................................................................................... 1-42
Figure 1-8 NetNumen Setup-Host Information Configuration Dialog Box................. 1-43
Figure 1-9 NetNumen Setup-System Information Detection .................................... 1-44
Figure 1-10 NetNumen Setup-Parameter Set Dialog Box........................................ 1-45
Figure 2-1 Console Dialog Box ................................................................................. 2-6
Figure 3-1 Uninstall Database Selection Dialog Box ................................................. 3-5
Figures
Tables
Table 1-1 Hardware Configuration Requirement for the U31 R22 Server................... 1-2
Table 1-2 Software Configuration of the Server ......................................................... 1-3
Table 1-3 Description of Network Scales ................................................................... 1-6
Table 1-4 Explanations of Parameters in the Database Connection Config
Page ........................................................................................................ 1-8
Table 1-5 Description of Configuring the Host Information....................................... 1-10
Table 1-6 Hardware Configuration of U31 R22 Client .............................................. 1-14
Table 1-7 Software Configuration of the Client ........................................................ 1-14
Table 1-8 Hardware Configuration Requirement for the U31 R22 Server................. 1-20
Table 1-9 Software Requirement of the U31 R22 Server ......................................... 1-23
Table 1-10 Description of Network Scales ............................................................... 1-29
Table 1-11 Hardware Configuration Requirements on the U31 R22 Server ............. 1-34
Table 1-12 Software Configuration Requirements on the Server ............................. 1-36
Table 1-13 Parameter Descriptions for Database Connection Configuration............ 1-42
III
Tables
Glossary
PC
- Personal Computer